Element id=doc does not longer exist on the admin home page
The "main block" need to be localized using the new class 'main
container-fluid'
We will certainly need to improve this later.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The tricky part here was to find an alternative for ends-with in Xpath
version 1
Indeed there are 2 button with
"/admin/authorised_values.pl?op=add_form", and the first one was picked
(/admin/authorised_values.pl?op=add_form&category=Asort1)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To make it reusable easily.
Test plan:
The basic_workflow.t tests should still pass after this change.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fix for:
Out of range value for column 'amount'
t/db_dependent/Circulation/Chargelostitem.t
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fix for:
Data too long for column 'proccode'
t/db_dependent/Accounts.t
FIXME LATER - It's a varchar(4), must be integer!
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fix for:
Field 'marcxml' doesn't have a default value
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fix for:
Out of range value for column 'tax_rate'
t/db_dependent/Koha/Acquisition/Basket.t
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fix error:
Out of range value for column 'amount'
DBD::mysql::st execute failed: Out of range value for column 'amount' at
row 1 [for Statement "INSERT INTO `account_offsets` ( `amount`,
`debit_id`, `type`) VALUES ( ?, ?, ? )" with ParamValues:
0=7925469795795194609664.000000, 1='10', 2='Manual Debit'] at
/usr/share/perl5/DBIx/Class/Storage/DBI.pm line 1832.
7925469795795194609664.000000
=> Should be lower anyway
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
For instance items.replacementprice is decimal(8,2) but more than 2 decimals are generated.
It leads to issues when we compare expected objects:
# got: '135623.866142537'
# expected: '135623.87'
Test plan:
prove t/db_dependent/TestBuilder.t
must return green
Signed-off-by: Dominic Pichette <dominic@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Somehow I have the feeling that we should allow more decimals sometimes
and perhaps have a number of decimals parameter or so. Think of fields
like currency or discount.
But the current issues justify this change.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
# Failed test 'borrowers.updated_on should have been set to now on creating'
# at t/db_dependent/Patrons.t line 74.
# got: '2017-08-10T20:53:03'
# expected: '2017-08-10T20:53:04'
# Looks like you failed 1 test of 17.
[20:53:15] t/db_dependent/Patrons.t .....................................
The plan here is to compare the number of seconds between two dates.
If < 60 the dates are consired as identicals.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
String::Random version 0.26 (on Jessie) does not yet support the rand_gen
parameter (0.27 does, newest is 0.29 on CPAN now).
So alt_rand is only used in determining the size on Jessie.
That might be enough though.
Adding a documention line in this regard.
Removing the obsolete max parameter.
Note: I timed alt_rand for the creation of a new Bytes::Random::Secure
object each time. But each call is about 0.1 milliseconds. So that
should be fine.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Use Bytes::Random::Secure instead of perl rand.
Return a string from 50 to 100% of $size.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When an id is generated by TestBuilder (branchcode for instance) and the
size of the generated string is 1, we have too many chances to get
"Violation of unique constraint in Branch".
This patch increases the number of retries to 5.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended to make room for follow-up.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When you do not supply a source and add a few wrong parameters, you
would not be warned. Because build simply returns undef.
Adding a carp and a test for that situation too.
Note: In the earlier subtest 'trivial tests' build was called without
source. This now generates a warning. We just catch if there is a warning
and test the actual warning itself later on.
Test plan:
Run t/db_dependent/TestBuilder.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Only value and source are allowed
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Makes TestBuilder::build() alert the user when unreognized
parameters are passed, which happens when the user supplies
the column values directly, forgetting the 'value' hash.
This patch holds the code changes. Examples of the kind of
errors that it catches are in the tests (separate patch).
Sponsored-By: Halland County Library
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 18314 causes t/db/SIP/Message.t to fail (quite often) since
TestBuilder fills login_attempts with a random number. (Note: Only
when FailedLoginAttempts is non-zero.)
Trivial fix: TestBuilder should have a zero default for login_attempts.
Test plan:
Do not yet apply this patch.
Set pref FailedLoginAttempts to say 3.
Run t/db_dependent/SIP/Message.t. Might fail on the password test (CQ).
Apply this patch.
Run t/db_dependent/SIP/Message.t again. Does not fail anymore.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Changes the $id parameter to an array. (IssuingRule has three keys.)
The build_object method in TestBuilder.pm has been adjusted to pass
multiple primary key values to find.
Also adjusted the POD section to show more clearly that we accept
the same parameters as DBIx ResultSet does.
Test plan:
Run t/db_dependent/Koha/Object.t
Run t/db_dependent/Koha/Objects.t
Run t/db_dependent/TestBuilder.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Couldn't make the tests pass using Test::DBIx::Class, so reverted to the "usual way" since these tests are
in db_dependent anyway.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new method to t::lib::TestBuilder so it can return
Koha::Object-derived objects. The new method is called ->build_object
and requires the plural of the target class to be passed.
'class' is a mandatory param, and a warning is raised and undef is
returned if absent.
It accepts 'value' as the original ->build() method, and that is passed as-is
to ->build().
To test:
- Apply the patches
- Run:
$ sudo koha-shell kohadev
k$ cd kohaclone
k$ prove t/db_dependent/TestBuilder.t
=> SUCCESS: Tests pass!
- Sign off :-D
Sponsored-by: ByWater Solutions
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We will certainly have to do something with the biblio_metadata.metadata
field later.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The items.more_subfields_xml is set to random data (generated by
TestBuilder), and so GetMarcBiblio does not manage to embed items (if
needed).
The error is:
:1: parser error : Start tag expected, '<' not found
More precisely it explodes in
C4::Items::_parse_unlinked_item_subfields_from_xml when
MARC::Record->new_from_xml is called with an invalid xml
This patch adds a default values mechanism to TestBuilder to avoid
modifying all the existing calls.
Test plan:
Set SearchEngine to ElasticSearch
prove t/db_dependent/Circulation.pl
should return green with this patch
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
TestBuilder should not generate datetime for date columns, but only for
datetime and timestamp columns.
Test plan:
Make sure the change in t/db_dependent/TestBuilder.t are consistent.
Before this patch, 1 of the 2 tests should fail.
After this patch applied, they both should pass.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The number of tests using TestBuilder is gradually growing. Once you
are familiar with its use, you will appreciate it and find yourself
using it when writing new tests. Although it works quite well, some details
still needs some polishing.
While looking at the handling of composite keys in TestBuilder, a number
of related points came up too. This patch finally ended up in setting
the following design goals:
[1] TB should not only look at the first column of a composite FK.
[2] TB should optionally create records for fixed FK values.
[3] TB should create a new record, never change an existing record.
[4] TB should respect auto_increment columns.
[5] Passing a hash for a foreign key should always imply a new record.
[6] Explicitly passing undef for a column should mean NULL.
[7] Add a delete method; it will replace the clear method.
[8] Simplify by removing $default_values, hash key _fk and param only_fk.
The comments below further clarify these points. Note that they refer to
the old behavior (before this patch) unless stated otherwise.
Comments for point 1
====================
Look at:
$builder->build({
source => 'UserPermission',
value => {
borrowernumber => $borrowerno,
module_bit => { flag => 'my flag' },
code => 'will_be_ignored',
},
});
Module_bit and code here are a composite FK to permissions.
TB ignores the value for the code column here and creates a record with a
randomized code.
But if we would pass the hash in the second column of this compound key like:
borrowernumber => $borrowerno,
module_bit => 10,
code => { code => 'new_code' },
TB would now crash when passing the hash for code thru to DBIx.
Comments for point 2
====================
Look at:
$builder->build({
source => 'UserPermission',
value => {
borrowernumber => $borrowerno,
module_bit => 99,
code => 'new_super_tool',
},
});
TB detects a fixed value for the module_bit, continues and will crash on
DBIx if the foreign keys are not found. In this case it would be friendly
to create a missing linked record.
Comments for point 3
====================
Look at:
$builder->build({
source => 'Branch',
value => { branchcode => 'CPL' },
});
If this branch already exists, this call would modify the branch record and
overwrite all columns with randomized values (expected or not). In any case,
it would be safer here to return undef than modifying an existing record.
Comments for point 4
====================
Look at:
$builder->build({
source => 'Borrower',
value => { borrowernumber => '123456789' },
});
If this number would exist, we would update (as earlier). But if this
number does not exist, we would create the record. Although that is
technically possible, I would prefer to have TB respect the auto
increment property of this column.
Comments for point 5
====================
Look at:
$builder->build({
source => 'Item',
value => { homebranch => { branchcode => 'MPL' } },
});
As discussed under point 3, we should actually not pass primary key values
if we expect to build new records. The same also holds for the deeper
(recursive) calls to build when using hashes like here for homebranch.
In this case again an existing record might be overwritten.
Comments for point 6
====================
Look at:
$builder->build({
source => 'Reserve',
value => { itemnumber => undef },
});
As you know, a reserve without an itemnumber is a biblio level hold.
Unfortunately, TB did not care about passing undefs until now. So you would
get an item level hold.
In the new situation TB will respect these explicit undefs, as long as the
corresponding foreign key column is nullable of course.
Comments for point 7
====================
This patch will allow you to delete records created by TB:
my $patron = $builder->build({ source => 'Borrower' });
$builder->delete({ source => 'Borrower', records => $patron });
Or:
$builder->delete({ source => 'Borrower', records => [ $patron, ... ] });
For safety, delete requires you to provide all primary key values in the
passed hashref(s).
Deleting all records in a table via clear is no longer supported and can
still be arranged in one statement.
Comments for point 8
====================
Current use of TestBuilder reveals that $default_values and only_fk
are not really needed. The current $default_values should imo not be in the
module anyway; if you want to use it, you could still pass it to TB:
$builder->build({ ..., value => { %defa, %your_values } });
Only_fk stops at the very last step of saving the top level record while
storing all linked records at the lower levels. Practical use is not
very obvious; it can be easily simulated by one delete statement.
The hash key _fk is now used to store all linked records one or more levels
down. It is used in a few tests to retrieve a value one level down.
Why not retrieve that one value via the database and get rid of the
whole structure?
Implementation
==============
This highlights the main changes:
The $default_value hash (with some hardcoded values for UserPermission)
is removed from the module. It was used by a test in TestBuilder.t and has
been relocated.
The value of $gen_type is returned now by sub _gen_type. (See new.)
The main change in the build method is moving the foreign keys logic to a
new subroutine _create_links. This routine now looks at all columns of a
composite FK. It checks if a linked record exists for passed values, and
it looks at NULL values.
Routine _buildColumnValues is slightly adjusted to allow for passed undef
values. The theoretically endless loop is replaced by three tries. For
composite unique constraints we only check complete sets of values.
Routine _getForeignKeys contains a check to not return the same relation
twice in case of doubled belongs_to relations in the DBIx scheme.
The eval in _storeColumnValues is removed. The autoincrement check in sub
_buildColumnValue got more priority; the handling of foreign keys has been
adjusted and a check for not-nullable columns has been added.
TEST PLAN
=========
This patch only deals with the TestBuilder module itself. In the follow-up
patches TestBuilder.t and a few other unit tests are adjusted.
[1] Do not yet apply this patch. But apply the 'OldBehavior' patch.
Verify that all tests pass. (They cover the first six design goals.)
[2] Apply this patch. Does TestBuilder still compile (perl -c)?
[3] Run the OldBehavior test again. Do all tests fail now? This means
that we got rid of all unwanted side-effects in the list of goals.
[4] Run some other tests that use TestBuilder. (See below.)
Skip the following tests; a follow-up patch deals with them.
t/db_dependent/Accounts.t
t/db_dependent/Barcodes.t
t/db_dependent/Circulation/AnonymiseIssueHistory.t
t/db_dependent/Circulation/CalcFine.t
t/db_dependent/Holds.t
t/db_dependent/Items/MoveItemFromBiblio.t
t/db_dependent/Koha/BiblioFrameworks.t
t/db_dependent/Members.t
t/db_dependent/TestBuilder.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
The following tests pass:
t/db_dependent/Acquisition/OrderUsers.t
t/db_dependent/Auth/haspermission.t
t/db_dependent/Barcodes_ValueBuilder.t
t/db_dependent/Budgets.t
t/db_dependent/Category.t
t/db_dependent/Circulation.t
t/db_dependent/Circulation/GetTopIssues.t
t/db_dependent/Circulation/IsItemIssued.t
t/db_dependent/Circulation/IssuingRules/maxsuspensiondays.t
t/db_dependent/Circulation/Returns.t
t/db_dependent/Circulation/TooMany.t
t/db_dependent/Circulation_dateexpiry.t
t/db_dependent/Circulation_transfers.t
t/db_dependent/CourseReserves.t
t/db_dependent/Creators/Lib.t
t/db_dependent/DecreaseLoanHighHolds.t
t/db_dependent/Exporter/Record.t
t/db_dependent/Holds/LocalHoldsPriority.t
t/db_dependent/Holds/RevertWaitingStatus.t:
t/db_dependent/HoldsQueue.t
t/db_dependent/Holidays.t
t/db_dependent/Items.t
t/db_dependent/Items_DelItem.t
t/db_dependent/Koha/Acquisition/Currencies.t
t/db_dependent/Koha/Authorities.t
t/db_dependent/Koha/BiblioFrameworks.t
t/db_dependent/Koha/Cities.t
t/db_dependent/Koha/Libraries.t
t/db_dependent/Koha/Objects.t
t/db_dependent/Koha/Patron/Categories.t
t/db_dependent/Koha/Patron/Images.t
t/db_dependent/Koha/Patron/Messages.t
t/db_dependent/Koha/Patrons.t
t/db_dependent/Koha/SMS_Providers.t
t/db_dependent/Koha_template_plugin_Branches.t
t/db_dependent/Letters.t
t/db_dependent/Members/AddEnrolmentFeeIfNeeded.t
t/db_dependent/Members/GetUpcomingMembershipExpires.t
t/db_dependent/Members_Attributes.t
t/db_dependent/Patron/Borrower_Debarments.t
t/db_dependent/Patron/Borrower_Discharge.t
t/db_dependent/Patron/Borrower_Files.t
t/db_dependent/Ratings.t
t/db_dependent/Reports_Guided.t
t/db_dependent/Reserves/GetReserveFee.t
t/db_dependent/Review.t
t/db_dependent/Serials_2.t
t/db_dependent/ShelfBrowser.t
t/db_dependent/Virtualshelves.t
t/db_dependent/api/v1/patrons.t
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch removes transaction handling code from TestBuilder.
It fixes the TestBuilder.t to handle the transaction on its own.
Verify that t/db_dependent/TestBuilder.t passes.
Followed test plan, TestBuilder.t passes
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
C4::Context::_new_dbh does not exist anymore.
Koha::Database::_new_schema should be mocked instead.
Will fix:
- t/00-load.t
- t/Breeding.t
- t/ImportBatch.t
- t/Message.t
- t/Overdues.t
- t/Prices.t
- t/RotatingCollections.t
- t/Search.t
- t/SuggestionEngine_AuthorityFile.t
- t/XSLT.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
DBD::mysql::db begin_work failed: Already in a transaction at /usr/share/perl5/DBIx/Class/Storage/DBI.pm line 1560.
DBIx::Class::Storage::DBI::txn_rollback(): Storage transaction_depth 0 does not match false AutoCommit of DBI::db=HASH(0xa429648), attempting ROLLBACK anyway at t/lib/TestBuilder.pm line 363
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This module will be called by db_dependent tests, which already create a
transaction.
TestBuilder creates a new one (which is certainly useless) and the
rollback does not do anything.
To see the warning see patches on bug 14045.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
There were some issues in the previous patch. This patch fixes the
following:
- rename $value with $original_value
- remove $at_least_one_constraint_failed and $values_ok which make the
code unnecessarily complicated
- the constraints have to be checked only if no original value is passed
- _buildColumnValue created a key to the default value hashref, it broke
the test:
last BUILD_VALUE if exists( $default_value->{$source} );
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Unique constraints should be checked when creating random data. Otherwise
we get failures when the generated data already exists on the DB.
This patch takes advantage of ->unique_constraints() to do the job,
looping through all the unique constraints defined for the source.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
t::lib::TestBuilder::_gen_text does not use correctly the regex and the
max parameter to generate the random string (String::Random).
This can cause future tests to fail.
http://bugs.koha-community.org/show_bug.cgi?id=14195
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Script tested, problem occurs, patch fixes it.
Bad number on commit subject
No errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
* Fix syntax error
* Remove Schema files for nonexistant tables
* Fix circular dependency
* Makes unpushed followup for bug 11518 unnessary
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch contains a new module t::lib::TestBuilder which allows to write tests easier and it contains the unit tests of this module.
For more information, see the documentation of the module.
This module uses the DBIx::Class schema and works with a clean DBIx::Class schema. In order to use it, you have to remove the current circular dependence (existing in the DBIx::Class) by applying the last patch of the bug 11518.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch suggests to create a routine to mock C4::Context::_new_dbh.
NOTE: Works the same with and without this secondary patch.
koha-qa tests fine. Less cutting and pasting in the future.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
t::lib::Mocks::Context tried to deal with preferences but did not manage
to.
This patch removes this module and add 2 routines in t::lib::Mocks in
order to mock C4::context->preference and C4::Context->config.
To test:
===START t/test.pl===
use Modern::Perl;
use t::lib::Mocks;
use C4::Context;
say "initial value for version: " . C4::Context->preference('Version');
say "initial value for language: " . C4::Context->preference('language');
t::lib::Mocks::mock_preference('Version', "new version for testing");
say "version is mocked with: " . C4::Context->preference('Version');
say "language is not yet mocked: " . C4::Context->preference('language');
t::lib::Mocks::mock_preference('language', 'new langage for testing');
t::lib::Mocks::mock_preference('Version', 'another version for testing');
say "version is mocked with another value: " . C4::Context->preference('Version');
say "language is finally mocked: " . C4::Context->preference('language');
===END===
Try to execute this file and check that the output is consistent.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This update the way Member is added and editing so that import and Edition
could be best automatized
GetMember evolves and allow ppl to serach on a hash of data
Adding SQLHelper A new package to deal with INSERT UPDATE and SELECT
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
* removed lib/KohaTest/Labels.pm, which is now completely outdated
* updated list of database tables to truncate in lib/KohaTest.pm
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
