to test..
1/ run t/Creators.t test from git repo, get a FAIL
2/ apply patch
3/ repeat step 1, get a PASS
mason@xen1:~/g/k/3.16.x$ sudo koha-shell -c 'export PERL5LIB=/home/mason/g/k/3.16.x ; cd /home/mason/g/k/3.16.x ; prove -v t/Creators.t' k316x1
t/Creators.t ..
1..16
ok 1 - use C4::Creators;
ok 2 - use C4::Creators::PDF;
ok 3 - testing new() works
ok 4 - testing pdf file created
ok 5 - testing Add() works
ok 6 - testing Bookmark() works
ok 7 - testing Compress() works
ok 8 - testing Font() works
ok 9 - testing FontSize() is set to 12 by default
ok 10 - testing FontSize() can be set to a different value
ok 11 - testing Page() works
ok 12 - testing StrWidth() returns correct point width
ok 13 - testing Text() writes from a given x-value
ok 14 - testing Text() writes to the correct x-value
ok 15 - testing End() works
ok 16 - test file /tmp/4YjPQDExeS created OK
ok
All tests successful.
Files=1, Tests=16, 1 wallclock secs ( 0.03 usr 0.01 sys + 0.48 cusr 0.05 csys = 0.57 CPU)
Result: PASS
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When having more than 20 (or numSearchResults) reviews waiting to be approved in <site>/cgi-bin/koha/reviews/reviewswaiting.pl?status=1,
the paging at the bottom only offset by 1 entry, instead of moving a full page (20 entries) ahead.
The simple fix uses 'page' instead of 'offset'.
TEST:
1) Modify numSearchResult preference to a low (5?) value.
2) create X comments, where X is greater than the value above.
3) approve them all (although this step is probably unnecessary)
4) Go to tools >> comments (approved comments tab)
5) You see X entries. Click on page 2 at bottom. Link should show "offset=2")
6) You get same results, except the first one which "slided out".
Apply patch, redo step 4-5.
With patch, paging works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Follow-up for
- it-IT unimarc
- ru-RU unimarc
- uk-UA unimarc
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To Test
---------
1) Apply the patch
2) Export some MARC bibliographic records from Koha
3) Import those same MARC bibliographic records using the
"ISSN(022$a)" record matching rule.
4) The incoming records should match perfectly
5) Check the mysql tables (marc_matchers, matchpoints,
matcher_matchpoints, matchpoint_components,
matchpoint_component_norms) to make sure the values were
inserted as expected.
For new Koha installation
1) create the koha database
2) Go to the staff client page, and do a "fresh" install making
sure to select lots of optional marc 21 matching rules so
the .../marc21/optional/marc21_default_matching_rules.sql
gets triggered.
3) Check the mysql tables (marc_matchers, matchpoints,
matcher_matchpoints, matchpoint_components,
matchpoint_component_norms) to make sure the values were
inserted as expected.
Bug 14472 - Added Atomic Update to fix wrong issn search index
- Fix comments
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch implements the copy and replace action for the marc
modification templates.
Instead of copying a field/subfield, it will erase the destination
fields/subfields.
Test plan:
Find it yourself.
Compare the differences between the copy and the copy_and_replace
actions.
The easier way to test is to 1/ create a complete record, 2/create some
modification templates and 3/ use the batch record modification with the
"preview" function.
QA note: I kept the same tests as "copy" and, if no change were
expected, I noted them "(same as copy)", to be sure this new action won't
introduce regression on these tests.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch add the new value for the MTT action.
It updates the marc_modification_template_actions.action DB field to
allow 'copy_and_replace_field'.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Just some cleaning before to continue, _copy_field and _copy_subfield did not
do anything useful.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There is an inconsistency in the copy action:
Given the following control sample:
245 _aThe art of computer programming
_cDonald E. Knuth.
300 _aA_exists
_bB_exists
If we apply action (a) Copy the whole field 245 to 300, we get:
245 _aThe art of computer programming
_cDonald E. Knuth.
300 _aA_exists
_bB_exists
300 _aThe art of computer programming
_cDonald E. Knuth.
If we apply action (b) Copy the subfield 245$a to 300$a, we get:
245 _aThe art of computer programming
_cDonald E. Knuth.
300 _aThe art of computer programming
_bB_exists
In (a) the field is copied but in (b) the subfield is erased.
We should be consistent and don't erase the destination field.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When getting records from OAI-PMH, an error must be returned if there is no results.
See : http://www.openarchives.org/OAI/openarchivesprotocol.html#ErrorConditions
Test plan :
- Enable OAI webservice
- Perform a query that will return no results. ie : /cgi-bin/koha/oai.pl?verb=ListRecords&metadataPrefix=marcxml&from=2099-12-30&until=2099-12-31
=> Without patch you get a response with :
<ListRecords/>
=> With patch you get a response with error code :
<error code="noRecordsMatch">No records match the given criteria</error>
- Check a good query returns still results
- Same test with ListIdentifiers verb
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add subfields l, n and o for better UNIMARC compliance
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Note: I just did a code audit here, as I don't know enough about
UNIMARC to know if the 4XX fields should have these subfields.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In some situations (bad migrations, old bugs that introduced bad data,
people having bib-level itypes for ages and switching to item level...)
the user ends with undex itype values for items.
The current code, if the user has item_level-itype set, just returns
undef. It should fallback to bib-level. In order to avoid hiding the problem
a warning is raised.
To test:
- Run the regression tets:
$ prove t/db_dependent/Items.t
=> FAIL: tests fail.
- Apply the patch
- Run the tests again
=> SUCCESS: The tests now pass.
- Sign off :-D
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Koha::Item->effective_itemtype should fallback to biblio-level itemtype
even if item-level item types are set, in the case the item has no itemtype
set (bad migration, bad old code).
To test:
- Run
$ prove t/db_dependent/Items.t
=> FAIL: Koha::Item->effective_itemtype doesn't work properly
Edit: Added a test for a warning when falling back as per QA request
and because it made a lot of sense :-D
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
http://bugs.koha-community.org/show_bug.cgi?id=14717
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test
1/ Import a patron using the patron import tool, make sure they have
no debarred column in the file
2/ Check the database, notice the debarred column is 0000-00-00
3/ For bonus points, checkout an item to that borrower, then check it in
notice Koha errors
4/ Apply patch
5/ Import a new patron
6/ Notice column is now NULL and that checkins work
Signed-off-by: Eugene Espinoza <eugenegf@yahoo.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When AutoBarcode is activated and you have set AcqCreateItem to 'on
order' there is a Javascript error when you try to generate a barcode
for the item:
TypeError: document.f is undefined
http://localhost:8080/intranet-tmpl/lib/jquery/jquery.js
Line 11
Test plan:
0/ a. Set AutoBarcode to hbyymmincr
b. Set AcqCreateItem to 'on ordering'
c. Set the plugin barcode.pl to the barcode field for the default
and the ACQ frameworks
1/ Go on the add items page (cataloguing/additem.pl) and confirm that
the plugin works as expected.
2/ Go on the New order page (acqui/neworderempty.pl) and confirm that
the plugin works as expected.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch introduces entries for monthly running the share_usage_with_koha_community.pl
script to the packages and also the crontab.example file for manual
installs use.
Edit: I fixed the Copyright line
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If IdependentBranches is ON, to edit/delete items from other branches
you need to be superlibrarian.
Currently a "simple" staff user cannot edit them from the edit item page
but from the catalogue detail page.
The edit links should not be displayed on this table.
Test plan:
O/ Set IndependentBranches to "Prevent".
Create a record and add 2 items:
Set homebranch to L1 for item I1.
Set homebranch to L2 for item I2.
1/ With a superlibrarian user, you should be able to edit both items.
2/ With a "simple" user attached to L1, you should only be able to edit
I1. The edit links should not be displayed for I2.
Note that the checkbox is displayed on the catalogue detail page (item
list), but on the batch tools, it won't be possible to select non-modifiable
items.
TODO: Add a server-side check. Indeed it is still possible to edit an
item if the user know the url.
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The change in MoveReserve from the previous patch begs for a test.
Here we add some to Reserves.t.
In all six tests we place a hold, move it and check the reserves again.
Depending on the status of ConfirmFutureHolds, and the reservedate the
hold should be moved or not.
Test plan:
Run the unit test.
Bonus: If you run Reserves.t by applying this patch but without the first
patch that changed MoveReserve, tests 60 and 61 should fail:
not ok 60 - MoveReserve filled future hold now
not ok 61 - MoveReserve filled future waiting hold now
This may further illustrate the need of the first patch.
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
At checkout a hold for the same borrower is considered to be filled.
It is consistent to do the same for holds of the same borrower within
[ConfirmFutureHolds] days (if non-zero).
This goal is achieved by adjusting the CheckReserves call within
MoveReserve, adding the lookahead parameter.
I used this occasion to revisit other calls of CheckReserves:
- transferbook: no need to add lookahead; a future hold should not block
a transfer;
- CanBookBeIssued: no lookahead; future hold does not block an issue;
- CanBookBeRenewed: idem.
- GetOtherReserves (only used in circ/returns): this call might be a
candidate for lookahead too, but I leave that for another report. It is
in the context of checkin and transfer, not checkout.
Test plan:
[1] Set ConfirmFutureHolds to zero days. (You may also need to enable
AllowHoldDateInFuture.)
[2] Place a hold with borrower A on biblio X for tomorrow. Also place a hold
with borrower B on X for today. (Use biblio level holds.)
[3] Check out item Y of X to borrower A. Ignore the warning for borrower B
and do not cancel the hold of B (so: confirm checkout).
Verify that X has still two holds.
[4] Check in Y (without confirming a hold).
[5] Enable ConfirmFutureHolds, say 2 days.
[6] Check out Y to A again. Ignore the warning for B (no cancel). Verify that
X now only has one hold for borrower B (the hold for A was filled).
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
- prove t/db_dependent/Letters.t
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Currently it's not possible to include information about which
issue has arrived in the serial notification notice the patron
can subscribe to from the OPAC.
The patch makes the fields from the subscription and serial
table available to the notice template.
In order to be able to print information about the correct
issue, the GetAlert has been modified to expext the serialid
as externalid when the module is issue.
git grep SendAlerts (only call with 'issue' is in Serial.pm)
To test:
- Add a subscription, select a patron notification template
- Search for the record in the OPAC
- Go to the subscription tab - More details
- Subscribe to the notification
- Edit the notice template you selected for the subscription
- add fields from subscription
- add fields from serial (serial.serialseq has the issue
information)
- Receive an issue for the subscription
- Check that you have received the notification and that
all information has been printed correctly
NOTE: notice is sent directly, not through the message_queue
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
On creating an item type, if it already exists, it will replace the
existing one.
This patch prevent that and display a message to the interface.
Note: The fields are lost.
Test plan:
1/ Create an item type 'AAA', description 'AAA'
2/ Edit it, update the description with 'BBB'
3/ Create an item type 'AAA' with a description 'CCC' => you should get
a warning "already exists".
Works well, no errors
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Warning message is triggered.
Adding, editing and deleting item types still works.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The special regex chars are not escaped in C4::HTML5Media.
Test plan:
1/ Set 856$u=http://www.mrqe.com/lookup?talented+mr.+ripley
2/ Enable the pref HTML5Media
3/ Go on the detail page
It should not explode.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
On the edit items page, there is some weird JS code: if the user clicks
on the delete link and then cancel, the item is deleted anyway.
It's caused by the following JS code in browser.js
$('a[href*="biblionumber="]').click(function (ev) {
ev.preventDefault();
window.location = $(this).attr('href') + '&searchid=' + me.searchid;
});
Test plan:
- Do a search with multiple results
- Go to the detail page (make sure results browser shows up!)
- Use the "Edit items" link from the toolbar
- Delete an item (try both way)
- Choose "cancel"
- Delete an item (try both way) and confirm the deletion
You should see the browser after the deletion and the item should have
been deleted correctly.
- Edit an item (try both way)
You should see the browser (did not work before this patch)
Note: Before this patch, the 2 first columns didn't contain the
edit/delete item links, now it's only the 1st one.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Much better!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The unit test is db dependent (as Jonathan correctly remarked),
since the sub checks a preference.
Test plan:
Run t/db_dependent/Biblio/TransformHtmlToXml.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The ind_tag of TransformHtmlToXml is unused.
Some calls to this function incorrectly revert indicator and ind_tag (which
is not a problem when both are empty..)
Patch of Srdjan Jankovic, amended and signed off by Marcel de Rooy.
The following calls are fixed:
call in acqui/addorder.pl: switched indicator with ind_tag
call in acqui/addorderiso2709.pl replaced too
acqui/finishreceive.pl replaced too
These calls are fine:
two calls in cataloguing/additem.pl are fine
call in serials/serials-edit.pl is fine
call in tools/batchMod.pl is fine
The folllow-up patch adds a simple unit test.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
With AcqCreateItem=='placing an order', tested if adding an order still
worked (covered both addorder.pl and addorderiso2709.pl).
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The pref are double encoded.
From bug 12411:
"This will fix the encoding issues existing in 3.14 and 3.16.
The issue still appear in master but is fixed by bug 11944."
They should not have been pushed together.
Test plan:
1) You need an accentuated language installed.
2) Go to NoLoginInstructions pref, and add some accentuated message like
"Hélo médames é mècieüx"
3) refresh opac home page, message should be gibberish
4) apply patch. Message should be ok now.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Works as expected.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Bug 10404 adds the use of String::Random to catalogue/search.pl but bug
11369 removes it without removing the import line.
Test plan:
git grep String::Random catalogue/search.pl
should not return anything
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The script dies with
Can't use an undefined value as a HASH reference at tools/export.pl
line 149.
if it is called from the command line.
This is introduced by bug 13040.
The C4::Context->userenv is not defined in this case.
Test plan:
Execute the script using the command line.
With the patch applies you should not get the error.
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
A constraint is missing on the course_reserves.ci_id field.
This patch adds it and removes orphan rows.
Test plan:
0/ Don't apply the patch
1/ Login to Staff Site.
2/ Go to Course Reserves
3/ Create Course
4/ Add Reserve
5/ Go to item added (delete item/record)
6/ Refresh Course (see no items attached)
7/ Delete Course
8/ See course still listed in the courses (Not deleted)
9/ Apply the patch and execute the updatedatabase entry.
10/ Delete the Course
Note that the course has correctly been removed.
NOTE: Make sure to set the UseCourseReserves system preference to test.
Tested before (problem existed) and after (problem solved) update.
Dropped DB, web installed, and put in dummy data and retested.
Problem solved.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Bug 13970 removed some useful code to automatically set the guarantor
when creating a child.
But finally there is a better way to do the job, we just need to assume
that only children or professional can have a guarantor.
Test plan:
1/ Create an adult patron and add a child.
2/ The guarantor info should be retrieved and set on the child creation
page.
3/ Create an organization and add a child
4/ The guarantor info should be retrieved and set on the adult creation
page.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
This patch catches both cases, thanks Jonathan!
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
When moving from Moose to Moo we didn't address a minor syntax change
Moo introduces. This patch fixes that.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The reserves.constrainttype does not exist anymore, it has been removed
by bug 9809.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
AllowRenewalIfOtherItemsAvailable checks
C4::Reserves::IsAvailableForItemLevelRequest to see if the item is
holdable, which catches not for loan values less than 0 ( i.e. holdable,
but not circ-able ). However, since this feature is about
actually checking out items to patrons, we should not count *any* not
for loan items when deciding if the available items will satisfy all
current holds.
Test Plan:
1) Enable AllowRenewalIfOtherItemsAvailable
2) Create a record with two items
3) Check out one item to a patron
4) Ensure the item is renewable
5) Place a hold on the record
6) The item should now be non-renewable
7) Add a second item to the record, but with a not for loan value < 0
8) Note the checkout is still renewable
9) Apply this patch
10) Note the checkout is now non-renewable
Works ok.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Adds a new line for the holiday's description instead of the string
\r\n.
Test plan:
1. In tools -> Calendar look at some holiday's description
(Do a new holiday with description of multiple lines if
there is not already)
2. Notice that there is characters \r\n if someone has put
a newline in the holiday's description
3. Apply patch
4. See that the new lines show there now nicely
Sponsored-by: Vaara-kirjastot
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended slightly: no need to replace title.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the 'Htmlarea' type to the dropdown box
introduced by bug 14268, commit 6e3bcc38.
Sponsored-By: Halmstad County Library
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a system preference "UseWYSIWYGinSystemPreferences" to the Staff Client tab.
By default, it is off, which means that the TinyMCE WYSIWYG editor won't be shown for system
preferences with a type of "htmlarea".
However, when it's on, it will show the editor for "Local Use" preferences with a "htmlarea"
type, and for other system preferences in the "Opac", "Circulation", and "Staff Client" tabs,
which I have re-assigned. (Basically, I grepped for HTML and changed the type for all
the system preferences I found except for "IntranetNav", "OpacCustomSearch", and "OPACSearchForTitleIn",
as a WYSIWYG editor would potentially break the output for these system preferences or
add no value to them...)
_TEST PLAN_
0) Run `perl installer/data/mysql/updatedatabase.pl` after setting your environmental variables
1) Check the Opac tab to make sure that the WYSIWYG is nowhere to be seen
2) Change the "UseWYSIWYGinSystemPreferences" preference in "Staff Client" to "Show"
3) Refresh the Opac tab and notice that many system preferences now have a WYSIWYG editor
4) Try typing some text into these fields
5) Note that it gets marked as "modified"
6) Save the preference, and refresh the page
7) Note that the content has been saved
8) Take a look at how it's rendered on the actual webpage!
Signed-off-by: Martin Persson <xarragon@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
