Test plan:
0/ Create a new notice suggestions > TO_PROCESS
You can use the one defined in the other patch.
1/ Create a suggestion and link it to a fund
2/ Add a owner to this fund and make sure this patron has an email
address (the email address used should be the one defined in the
AutoEmailPrimaryAddress syspref).
3/ Execute the cronjob script with the -v and without the -c argument
4/ The output should tell you that an email will be sent
5/ Execute the cronjob script with the -v and with the -c argument
6/ Verify the notice is generated in the message_queue table and it is
correctly formatted.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Most of them were found and fixed using codespell.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is major problem for plack installations with utf-8 encoding.
In this case, we are overriding CGI->new to setup utf-8 flag and
get correctly decoded $cgi->params, and reset syspref cache using
C4::Context->clear_syspref_cache
Test scenario:
1. under plack try to search with utf-8 charactes
2. try to find patron with utf-8 characters
Signed-off-by: Gaetan Boisson <gaetan.boisson@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch renames translation files for Bengali
language, from ben-* to bn-IN-*.
Also adds India as region
To test:
1) Apply the patch
2) Run updatedatabase
3) Install Bengali language
cd misc/translator
perl translate install bn-IN
enable
Check correct description
4) Create and install a fake Bengali variant
cd misc/translator
perl translate create bn-XX
perl translate install bn-XX
enable both variants
Check correct rendering of region
Results comply with expected test plan outcome. Signed off for bn-IN
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The output filename is notices_all_<date>.[html|csv|ods] if no
letter_code parameter is given.
If 1 is given: notices_<letter_code>_<date>.[html|csv|ods]
If 1+ are given:
noties_<letter_code1>_..._<letter_codeN>_<date>.[html|csv|ods]
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fix --html without --letter_code
Fix --ods which was producing a 2 lines ods file
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
No more encoding issue with html file, no problem with csv|ods
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If you choose to generate print notices for a specific letter code, the
generated files should be distinct.
The use case is: you want to process print notice for letter codes:
overdue1, overdue2 and overdue3.
The cronjobs will be:
perl misc/cronjobs/gather_print_notices.pl
/tmp --letter_code=overdue1 --csv --ods --html --delimiter=";"
perl misc/cronjobs/gather_print_notices.pl
/tmp --letter_code=overdue2 --csv --ods --html --delimiter=";"
perl misc/cronjobs/gather_print_notices.pl
/tmp --letter_code=overdue3 --csv --ods --html --delimiter=";"
without this patch, the 2 first files will be erased.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds:
- the ability to generate an ods file
From now you are able to generate a ods file for print notices.
You would like to generate a csv file and not a html file.
Test plan:
- same as previous patch but test the following parameters:
perl misc/cronjobs/gather_print_notices.pl /tmp/test --ods
--letter_code=OVERDUE -d=:
you should get an error because csv2ods is not installed.
Follow the installation instructions and try again the command.
A ods file should be generated in your /tmp/test directory.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds:
- the ability to generate a csv file instead of a html file.
- a letter_code parameter.
From now you are able to generate a csv file for print notices.
Imagine a template notice defined as:
cardnumber:patron:email:item
<<borrowers.cardnumber>>:<<borrowers.firstname>> <borrowers.surname>>:<<borrowers.email>>:<<items.barcode>>
You would like to generate a csv file and not a html file.
Test plan:
- define your ODUE notice for the print template as:
cardnumber:patron:email:item
<<borrowers.cardnumber>>:<<borrowers.firstname>> <<borrowers.surname>>:<<borrowers.email>>:<item><<items.barcode>></item>
- define overdues rules for a patron category
- check 2 items out using a due date in order to generate the overdue
notices
- check these 2 items in
- launch the overdue_notices script
- the message_queue table should now contain 2 new entries
- launch the gather_print_notices cronjob with the following parameters:
perl misc/cronjobs/gather_print_notices.pl /tmp/test --csv
--letter_code=OVERDUE --letter_code=CHECKIN
you should get an error
perl misc/cronjobs/gather_print_notices.pl /tmp/test --csv
you should get an error
perl misc/cronjobs/gather_print_notices.pl /tmp/test --csv
--letter_code=OVERDUE -d=:
will produce 1 csv file in your /tmp/test directory
- verify the csv file is correct and contain only 1 csv header column.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
QA note: Keep in mind that you can use all placeholders for the
csv that you can use for the normal templates. If you normally
get the item information from <item></item> you need to use that.
If you can use <<item.barcode>> directly, you can also do so
in the csv.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch refactores and adds some good practices:
- use Modern::Perl
- use Pod::Usage
- add POD
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
koha-qa should be good :
OK misc/devel/coverage.pl
OK critic
OK forbidden patterns
OK pod
OK valid
OK C4/Installer/PerlDependencies.pm
OK critic
OK forbidden patterns
OK pod
OK valid
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors.
Test plan not explicitly stated,
script run and generates a lot of data :)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Fixed a small conflict on PerlDependencies.pm
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It's a script making a cover on all modules to see
which ones are not tested yet. It uses Devel::Cover
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Corrected specifield.
Updated usage statement on use of delimiter pref.
Clarified the CONDITION explanation somewhat..
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The original concern of bug 9892 was that this borrowers export script
cannot handle tabulation to separate columns.
With this patch, the delimiter preference is used as separator for the
output, to be consistent with others scripts.
This should be highlighted on the release, it can produce change in
behaviors.
Test plan:
Confirm that the 'delimiter' pref is used for the output, but you are able
to overwrite it with the 'separator' parameter
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as expected, respect preference but is supeseeded by cmd line
No koha-qa errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Links in rss templates were hardcoded to library.org.nz. Should pass and
use the system's OPACBaseURL.
Tested and verified.
Signed-off-by: Eivin Giske Skaaren <eskaaren@yahoo.no>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch gives a partial solution for this problem.
It ignores strings like "[% something %]", but not
"[% IF ( value ) %][% value %][% END %]"
We get 100+ strings less to translate
To test:
1) Update translation files for your preferred language
2) Apply the patch
3) Update again
4) Compare, you must find 100+ strings removed from
translation files
eg.
-msgid "[% SEARCH_RESULT.biblionumber |url %]"
-msgid "[% accepteddate | $KohaDates %]"
-msgid "[% amountoutstanding | format('%.2f') %]"
-msgid "[% authtypetext |html %]"
-msgid "[% barcode_llx |html %]"
-msgid "[% barcode_lly |html %]"
-msgid "[% biblio.quantity.length ? biblio.quantity : 1 %]"
-msgid "[% billingdate | $KohaDates %]"
-msgid "[% borname |html %]"
...
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Verified all strings removed from the po files were
pure TT.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Many libraries would like to be able to import various types of files as
MARC records ( citations, csv files, etc ). We can add a new function to
the plugins system to allow that kind of behavior at a very custom
level.
Test Plan:
1) Ensure you have plugins enabled and configured correctly
2) Installed the attached version 2.00 of the Kitchen Sink plugin
3) Download the attached text file
4) Browse to "Stage MARC records for import"
5) Select the downloaded text file for staging
6) After uploading, you should see a new area "Transform file to MARC:",
select "Example Kitchen-Sink Plugin" from the pulldown menu
7) Click 'Stage for import"
8) Click 'Manage staged records"
9) You should now see two new MARC records!
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described - interesting new feature.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds information about cron jobs performed and make it viewable
under Home > Tools > Logs ("Browse system logs")
To test:
Apply patch
- Got to system preferences and set 'CronjobLog' to: [Log] information from
cron jobs.
- Run some cron jobs
- Go to Home > Tools > Logs
- Verify that you have a selection 'Cron jobs' in drop-down 'Module'. Select it
with Action "All" and Submit.
- Output should show Date/time and info about Cron jobs
Rebased to work on top of Bug 6911 (conflict in viewlog.tt) /MV
Rebased after applying patch for Bug 6911 /MV
Conflicts resolved:
misc/cronjobs/overdue_notices.pl
misc/cronjobs/cleanup_database.pl
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
- Merge both patches, and fix updatedatabase.pl
- Works as described. Provide intersting feedback from cronjob scripts.
--
Modified version taking in account syspref CronJobLog. Handling simplified by introducing a convenience sub cronlogaction in C4/Log.pm /MV
Amended to take in account comments #11, #12, #13 /MV
http://bugs.koha-community.org/show_bug.cgi?id=13899
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch implements separate PO files for
different MARC dialects.
It depends on correct filenames, i.e. it will build PO
files using files with/without "unimarc|normarc|marc21"
on their names.
Changes:
A) LangInstaller.pm
Added definitions to create or update xx-YY-{MARCFLAVOR}.po,
minor change to create and install procedure, and modification
of install procedure to handle multiple target dirs.
Updated documentation.
B) Standarization of filenames
STAFF po file is now xx-YY-staff-prog.po
MARC dialects po files are xx-YY-marc-{MARCFLAVOUR}.po
To test:
1) Update po files for your preferred language, ej. nn-NO
cd misc/translator
perl translate update nn-NO
2) Do some copying/renaming
cp po/nn-NO-i-staff-t-prog-v-3006000.po po/nn-NO-marc-UNIMARC.po
cp po/nn-NO-i-staff-t-prog-v-3006000.po po/nn-NO-marc-NORMARC.po
cp po/nn-NO-i-staff-t-prog-v-3006000.po po/nn-NO-marc-MARC21.po
mv po/nn-NO-i-staff-t-prog-v-3006000.po po/nn-NO-staff-prog.po
(most MARC dialect strings are on staff, so we use that as basis)
3) Apply the patch
4) Update again to fix translation files, verbose
perl translate update nn-NO -v
5) Install language, verbose, verify translations
perl translate install nn-NO -v
6) Create translation files
rm po/nn-NO*
perl translate create nn-NO
we must have this list:
po/nn-NO-marc-MARC21.po
po/nn-NO-marc-NORMARC.po
po/nn-NO-marc-UNIMARC.po
po/nn-NO-opac-bootstrap.po
po/nn-NO-pref.po
po/nn-NO-staff-help.po
po/nn-NO-staff-prog.po
Additional tests:
7) Number of msgids
7.a) Before patch and after upgrade, extract and count msgids
for i in $(ls po/nn-NO-*po); \
do msginit -i $i -o nn-old.po --no-translator --no-wrap --locale=nn_NO; \
egrep ^msgid nn-old.po >> old; \
done
sort old | uniq | tee s-old | wc -l > n-old
s-old: have all msgids
n-old: number of msgids
7.b) After patch and after creation of new files
Repeat procedure, diferent files (s-new, n-new)
7.c) Compare (diff s-old snew), they are the same
(save for a strange UNIMARC char in my case, but
it's present on corresponding PO file)
8) Installed dirs/files
8.a) List of EN dirs/files
cd koha-tmpl
find | egrep "/en/" > en
8.b) List of nn-NO dirs/files. After patch and language install
cd koha-tmpl
find | egrep "/nn-NO/" | sed 's|/nn-NO/|/en/|' > nn
8.c) Compare (diff en nn), they are the same
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Followed the steps outlined by Bernardo, and everything works as
expected. I think the most important points are that "perl translate
create nn-NO" produces the right files, and translating anything in
them, then doing "translate install" makes the translations show
up in the interface. The numbers msgids in the nn-NO correspond
well wit the number of msgids in other sets of .po files.
I bet y'all will be happy when you don't have to see the stupid
Norwegian strings when you translate! ;-)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
You can/must use it when you change items mapping.
this script rebuilds the non-MARC DB items table from the MARC values
usage : batchRebuildItemsTables.pl [ -h ][ -c ][ -t ][ -where ]
Options:
-h --help (or without arguments) shows this help message
-c Confirm: rebuild non marc DB (may be long)
-t test only, change nothing in DB
--where add where condition on default query
(eg. -where 'biblio.biblionumber<100')
(copied test plan)
to test it :
create a test item (eg on biblionumber 3) with a non mapped subfield with a test value.
check real items DB row ( SELECT * from items where biblionumber=3 ) => non mapped value is in more_subfields_xml
map the non mapped subfield with unused items column
re-check in Db that nothing changes
run ./batchRebuildItemsTables.pl -c --where 'biblio.biblionumber=3'
check real items DB row ( SELECT * from items where biblionumber=3 ) => new mapped value is not in more_subfields_xml anymore but in the mapped column
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors.
Add a new item to record, save with value in unmapped subfield ('x')
Change mapping, run script, value on newly mapped column
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
cli-client doesnt respect the transaction_date format
"YYYYMMDDZZZZHHMMSS"
Using timestamp() to generate the proper datetime format.
"String $value undefined"-warning in build_field() fixed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
I needed to be able to perform checkout operations for testing from the
command line. I ended up reengineering the SIP2 command line tester
quite a bit.
Enhancements:
* Moved message generation code to subroutines
* Added support for more messages
* Added command line switches for each supported message
* Enabled use of Sip::Constants to keep code DRY and more understandable
* Moved script from misc to C4/SIP
* Designed with an eye towards possibly moving some code to CPAN in the future
* Also designed to make adding new messages much easier in the future
Test Plan:
1) Apply this patch
2) Look at help via ./C4/SIP/sip_cli_emulator.pl --help
3) Test patron status request and patron information, should work as before
except you need to pass the command line switche -m <message_name>
4) Test the new checkout option using -m checkout -i <item barcode>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Worked as advertised, with one warning at renew only:
Trying 'renew'
Use of uninitialized value $value in concatenation (.) or string at ./sip_cli_emulator.pl line 462, <GEN0> chunk 1.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
0/ Does not apply the patch
1/ Launch the export_borrowers.pl script to export data with unicode characters
% perl misc/export_borrowers.pl -w "borrowernumber=42" --field borrowernumber --field surname --field firstname
Use of the encoding pragma is deprecated at misc/export_borrowers.pl
7874,JOUBU,صةصةصة
2/ Apply this patch
3/ Repeat 1
% perl misc/export_borrowers.pl -w "borrowernumber=42" --field borrowernumber --field surname --field firstname
7874,JOUBU,صةصةصة
Note that the deprecated message is gone and the encoding is correct.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I confirm the warning (on Perl version above 5.14). And that the patch fix
the warning.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12760 adds the ability to purge expired restrictions older than some days.
But if you want to purge all expired restrictions, using "--restrictions 0" does not work, it's like "--restrictions" so it uses default purge days.
This patch adds a new option "--all-restrictions" to purge all expired restrictions.
Test plan :
- Select a borrower
- Create a restriction with expiration date in the futur
- Create a restriction expired since 1 day
- Create a restriction expired since 10 days
- run without argument "misc/cronjobs/cleanup_database.pl"
=> You see help text for --all-restrictions option
- run "misc/cronjobs/cleanup_database.pl -v --restrictions --all-restrictions"
=> You get the message : You can not specify both --restrictions and --all-restrictions
- run "misc/cronjobs/cleanup_database.pl -v --restrictions 30"
=> no restriction is removed
- run "misc/cronjobs/cleanup_database.pl -v --restrictions 9"
=> restriction expired since 10 days is removed
- run "misc/cronjobs/cleanup_database.pl -v --all-restrictions"
=> restriction expired since 1 day is removed
Signed-off-by: Larry Baerveldt <larry@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The file can be removed. The code is included in the db revisions
3.09.00.014 and 3.15.00.040.
Also I adjusted the text of TalkingTech.README and removed the reference to
the atomicupdate file.
NOTE: I open a new report for adding TalkingTechItivaPhoneNotification to
sysprefs.sql. Probably, the text inserted in the db revisions should have
been inserted into the sample notices sql text too. These corrections are
outside the scope of this report.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Add logging of errors.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
More errors are indeed showing up in the log.
(I took the liberty of changing the commit message a little bit.)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A minor QA comment.
::: misc/migration_tools/bulkmarcimport.pl
@@ +271,5 @@
> my ( $error, $results, $totalhits ) = C4::Search::SimpleSearch( $query, 0, 3, [$server] );
> + # changed to warn so able to continue with one broken record
> + if ( defined $error ) {
> + warn "unable to search the database for duplicates : $error";
> + next;
For consistency with the rest of the script, should this perhaps be:
next RECORD;
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Note that it cans also accept a date in the same format defined in the
dateformat system preference.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Adding 2 hints about the expected date format to the error
message and the help.
To test:
- Run overdue_notices.pl --date <someinvaliddate>
- Run overdue_notices.pl -man
- Verify hint about date format shows up
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 7447 introduces the --date option for overdue notices.
This option has never worked: the code is waiting for a value but the
option is defined as a boolean.
This patch fixes the option and change the way to calculate the range of
dates.
This range is now managed in Perl instead of in the SQL query. To do it
in Perl allows to build dates simply using the DateTime and
DateTime::Duration modules.
To test this patch you should have a DB with a lot of overdues, (I
tested on a DB with 512 overdues).
A test plan could be:
1/ Dump your message_queue table
2/ Verify the number of overdues in the database before applying the
patch:
mysql> DELETE FROM message_queue;
perl misc/cronjobs/overdue_notices.pl -v -t
(the triggered option will generate overdue for today)
mysql> SELECT COUNT(*) FROM message_queue;
Note this value 2A
mysql> DELETE FROM message_queue;
perl misc/cronjobs/overdue_notices.pl -v
mysql> SELECT COUNT(*) FROM message_queue;
Note this value 2B
2/ Apply the patch
4/ Verify the number of overdues generated by the patched script:
mysql> DELETE FROM message_queue;
perl misc/cronjobs/overdue_notices.pl -v -t
mysql> SELECT COUNT(*) FROM message_queue;
Note this value 4A
mysql> DELETE FROM message_queue;
perl misc/cronjobs/overdue_notices.pl -v
mysql> SELECT COUNT(*) FROM message_queue;
Note this value 4B
mysql> DELETE FROM message_queue;
# The date should be defined depending your dateformat preference
# and should be the date of the current day
perl misc/cronjobs/overdue_notices.pl -v -t --date="YYYY-MM-DD"
mysql> SELECT COUNT(*) FROM message_queue;
Note this value 4C
mysql> DELETE FROM message_queue;
# The date should be defined depending your dateformat preference
# and should be the date of the current day
perl misc/cronjobs/overdue_notices.pl -v --date="YYYY-MM-DD"
mysql> SELECT COUNT(*) FROM message_queue;
Note this value 4D
5/ Compare the values: All values generated with the -t options should
be equals. Same for values without the -t options.
=> 2A == 4A == 4C and 2B == 4B == 4D
6/ Go back to a normal activity for 3 days or manually change the
date_due for issues in the DB:
mysql> update issues SET date_due = DATE_SUB(date_due, INTERVAL 3 DAY);
Do again step 4C and 4D with a date equals to today - 3 days.
Values should be the same as 4C and 4D.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with my own test data, checked generating overdues
with and without the --date option.
All worked as expected.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch set as fuzzy some strings on translation files
that are incorrectly translated
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Makes translations work.
I left the code logic intact, and simply removed "text" from the regex.
Text input field values are now translated, no other logical changes are introduced.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test:
1) Update, install and enable es-ES language
2) Go to Reports > Acquisition wizard
3) On page bottom, there is a text field with the word 'Export'
4) Switch language, the word is not translated
5) Apply the patch
6) Update and install again es-ES language
7) Reload page, text now reads 'Exportar'
No koha-qa errors.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test
1/ Create some overdues and some issues due in the future
2/ Run the overdues script
3/ Notice item due in the future is in the list
4/ Apply patch
5/ Run script again
6/ Notice in the future not in the list
Signed-off-by: Nick <Nick@quechelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
