This patch set adds the ability to defined independent quotas for on-site
checkouts.
This will be done using the circulation rules matrix where a new column
“Current on-site checkouts allow” will be added.
This feature is going to use the same method as the existing fields maxissueqty
("Current checkouts allowed"), the new fields will be added to the
different tables (see the "DB changes" patch) and will be named
maxonsiteissueqty (for consistency).
In order to keep the existing behavior and to let more flexibility,
a new system preference is added (ConsiderOnSiteCheckoutsAsNormalCheckouts).
This syspref will let the liberty to the library to decide if an on-site
checkout should be considered as a "normal" checkout or not.
To keep the existing behavior, the syspref will be disabled (i.e. an on-site
checkout is considered as a normal checkout) and the number of on-site
checkouts will be the same as the number of checkout (maxissueqty ==
maxonsiteissueqty).
Technically:
There are only very few tests for the Circulation module, and the 2
subroutines impacted by this patch set were not tested at all.
It is necessary to introduce non-regression tests for this area.
The 2 subroutines are: C4::Circulation::GetBranchBorrowerCircRule
and C4::Circulation::TooMany (only called by
C4::Circulation::CanBookBeIssued, so we will take the liberty to change
the prototype to raise a better warning to the end user).
Test plan:
I. Confirm there is no regression and the existing behavior is kept
0/ Let the syspref disabled
1/ Set a rule to limit to 2 the number of checkouts allowed
2/ Do a normal checkout
3/ Do an on-site checkout
4/ Try to checkout (on-site or normal) an item again.
You should not be allowed.
II. Test the new feature - pref disabled
0/ Let the syspref disabled
1/ Set a rule to limit to 2 the number of checkouts allowed and to 1
the number of on-site checkouts allowed.
2/ Do an on-site checkout
3/ Try to do another one, you should not be allowed to do it.
4/ A normal checkout should pass successfully
Note that it does not make sense to have the number of on-site checkouts
alowed > number of checkouts allowed.
III. Test the new feature - pref enabled
0/ Enable the syspref
Now an on-site checkout is *not* counted as a normal checkout.
This means you can have the number of on-site checkouts > number of
checkouts allowed.
1/ Set the values you want for the 2 types of checkouts (normal vs
on-site).
2/ Even if a patron has reached the maximum of checkouts allowed, he
will be allowed to do a on-site checkout (vice versa).
IV. Stress the developper
Using the different configurations available in the circulation matrix,
try to find one where the checkout is allowed and not should be.
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The KohaDates plugin does that, it's not necessary to split the output.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes deprecated C4::Dates from circ/bookcount.pl
To test:
- Search for biblio with an item that has been checked out several
times and that has been transferred
- In left navigation click on 'Items'
- In list of items click on 'View item's checkout history'
- Verify that dates in 'Date arrived at current library' and in
column 'Last seen' display properly.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
From bug 7981:
GetBranchItemRule expects an itemtype, a scalar.
Here $itemtype is a hashref returned by C4::ItemType->get.
So $itemtype->{itemtype} should be passed.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Test plan: See Bugzilla.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
On the checkin and checkout page, the checkin will fail if the patron
has requested the privacy and the AnonymousPatron is not correctly set.
This patch adds a warning message on both pages.
Test plan:
0/ Be sure you don't have any patron with privacy=2 (Never)
1/ Set OPACPrivacy, not AnonymousPatron
2/ Go on the checkin, you should a warning (same as before this patch).
3/ Set the privacy=2 for a patron
4/ Go on the circulation page, a warning should appear (for this
specific patron)
5/ Check an item out to this patron
6/ Check the item in on the checkin page.
The item is not checked in and you get a specific message for this
patron.
Confirm other/correct situations don't trigger the messages.
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Test plan:
1. Ensure that ExpireReservesMaxPickUpDelayCharge is set to 0.
2. Place a hold (doesn't matter whether it's a bib/item-level hold),
then confirm the hold by checking it in.
3. Check in the item again, and hit Cancel.
4. The reserve in question should be cancelled.
5. Repeat steps 2-4 twice, once after setting
ExpireReservesMaxPickUpDelayCharge to a nonzero value and again
after clicking the "Forgive fees for manually expired holds"
checkbox.
A fine should only be applied when the syspref is enabled and the
checkbox is not checked. Also, the checkbox should only appear after
enabling the syspref. And finally, the checkbox should remember whether
it is checked across multiple checkins, same as the "Forgive overdue
charges" and "Book drop mode" checkboxes.
Signed-off-by: Jason Burds <jburds@dubuque.lib.ia.us>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: Removed 2 debugging lines.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This is the original patch for bug 12892 and replaces the older style of
fetching the holds data with Koha Objects. It will be used as a
foundation for future features.
Test Plan:
1) Apply this patch
2) Create a hold, set to waiting
3) Browse to circulation.pl for that patron
4) Note you see the list of waiting holds
5) Switch your logged in branch to a different branch
6) Note the "Waiting at" line is no longer emphasized.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Cathi Wiggins <CWIGGINS@ci.arcadia.ca.us>
Signed-off-by: Megan Wianecki <mwianecki@mplmain.mtpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The first error is caused by the fact that
$messages->{'IsPermanent'} is undefined.
The second error is caused by querying the CGI
parameter 'barcode' inside a function call. This is not required.
There is a variable $barcode set with the parameter. Changed to
use the variable.
TEST PLAN
----------
1) Test first patch.
2) Clear the log
3) Put in a barcode which is not checked out.
4) Check the log.
-- should be two errors. One about a hash,
the other will only be detectable under Debian 8.
5) Apply this second patch
6) Clear the log
7) Put in a barcode which is not checked out.
8) Check the log.
-- should be empty.
9) run koha qa test tools
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Test plan
=========
1/ check out an item and then check it back in.
1/ check the logs after the check-in to see the warns from
returns.pl line 623 of :
(a) Use of uninitialized value $holdingBranch
(b) Use of uninitialized value $collectionBranch
2/ apply patch
3/ check out and check-in again. no warns are recorded this time.
NOTE: Under Debian Jessie, there are other messages.
Additionally, this only corrects the line 623 ones.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch adds a "Don't Check Out and Print Slip" button to the dialog that appears
when trying to checkout a reserved item.
Test case :
* Put a hold on an item for User A.
* Try to check out it item with User B.
* The "Please confirm checkout" box should appear. The "Don't Check Out and Print Slip" button should appear in this box.
* Click on the "Don't Check Out and Print Slip" button.
* A print popup will appear
Signed-off-by: Nick <Nick@quechelibrary.org>
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
On moremember, the button is displayed for Organisations.
To be consistent, it should be displayed on the circulation page too.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Patch makes several small changes to the template for the
'Transfers to receive page'
1) Show the branch name instead of the branchcode in the
table of incoming transfers.
If there is a hold connected with the transfer:
2) Show the patron's name as 'surname, firstname'
intead of 'surname firstname'
3) Restore broken feature: Show a mailto: link with a
generated subject of 'Hold: <title>'.
The mailto: feature actually existed in the templates, but
was broken to a misnamed database column. I made some small
changes to make the subject translatable (see bug 8330).
To test:
- Create a transfer by placing a hold with pickup at another library
- Craete a transfer manually
- Go to the circulation > transfers to receive
- Check the changes explained above, compare before and after
- Check the mailto: link works as expected
Bonus: Check the Hold: bit in the subject is really translatable now.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The parameter was lost in previous commit.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Note that homebranchname is never used in the template.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch removes HomeOrHoldingBranchReturn syspref and makes circ/returns.pl respect branch
circulation rules from C4::Circulation::GetBranchItemRule. Also transfer slip notice should reflect this.
Default should always be to return item to home branch.
Test plan:
- make sure syspref 'AutomaticItemReturn' is set to 'false'
- unset 'Default checkout, hold and return policy' or set 'Return policy' to 'Item returns home'
- checkout an item and do a checkin from different branch than items homebranch
- verify that you're prompted with a transfer message to item's home branch and that print slip matches
- set 'Return policy' to 'Item returns to issuing library'
- do a checkout and a checkin from branch different than item's home branch
- verify that you're not prompted with a transfer message and that holding library is your current branch
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Follow-up:
- Added 3 tests in t/db_dependent/Circulation_Branches.t to test AddReturn
policies
- Removed HomeOrHoldingBranchReturn from sysprefs.sql
- Added notice on removing syspref in updatedatabase
QA edits:
- removed trailing whitespace in tests
- moved branchname lookup from returns.pl to template
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Test Plan:
1) Apply this patch
2) Renew an item via circ/renew.pl
3) Note the branch code of your logged in library is set as the
branch in the generated statistic line
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested pre and post patch, now branch is saved
No errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(Introduced by bug 13601)
Test plan
=========
1/ enable 'OnSiteCheckouts' pref under Circulation Preferences
2/ go to the checkouts page and try to issue an item to any user.
3/ when the item barcode entry form shows, select the 'On-site
checkout' checkbox
4/ the default date due should show as today with 00:00 as HH:MM
5/ apply the patch
6/ repeat steps 2 - 3. The default date due should show today's
date with 23:59 as HH:MM.
7/ run koha-qa.pl -c 1 -v 2
Remarks: Testing result match expected test plan output. The QA tests
pass with "OK" for the commit.
Technical note: There is a confusion with iso and sql date formats at
some places in the code.
A better way should be provided (later) to fix globally the mismatch
between these 2 formats.
What happened before this patch: the DateTime was cast to a string and
the template received "YYYY-MM-DDTHH:MM:SS" which is an iso formatted
date. BUT this format is not managed by Koha::DateUtils::output_pref
("iso" and "sql" are considered as indentical which is wrong).
As I did not estimated the problem (how big it is) I prefer to fix it
easily (and dirty) for now.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The script that returns data for the patron autocomplete does not use C4::Members::Search. Instead it uses bespoke code that does not behave like the traditional search and is very limited in how it can search.
If, for example, I search for "Kyle Hall" in the standard search, I would get "Kyle Hall" back as a result. For the autocomplete search, I will not.
This script should use C4::Members::Search to provide better searching and to keep the code base DRY.
Test Plan:
1) Enable the system preference CircAutocompl
2) Create a user with the first name "Test" and the surname "User"
3) Perform a checkout autocomplete search for "Test User"
4) Note you do not get the user as a result
5) Apply this patch
6) Try different combinations of "Test" and "User" such as
Test User
User Test
U Test
Test U
etc.
7) Note these searches now work
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch displays the address information in the left column of the patron's pages using the new system preference.
The address is formatted in member-display-address-style-us.inc and member-display-address-style-de.inc
To test:
- Apply patch on top of 1st and 2nd patch
- Select 'German style' in system preference 'addressformat' in I18N/L10N
- Verify that the address information displays properly in the left column of all patron's pages.
- Verify that the address displays properly in the main area of moremember.pl as well (Note: In right column, Alternate address /contact are not yet touched))
- Switch system preference to US style, repeat checks
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
AMending without changes to put this patch at the end of the patch list / Marc
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The biblionumber is sent to the template as 'itembiblionumber' at 1 place, the template get the 'biblionumber' variable.
I don't understand why but the easy way is to sent the variable twice.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The problem has been well described by Kyle and Nicole on bug 7255
description and comment 1.
With this counter patch, I suggest to popup AFTER the return has been
confirmed. This will remove the race condition and avoid to pass
itemnumber to the pl file as in the patch submitted by Olli.
Only the borrowernumber and biblionumber are needed (transfer and op are
never used by circ/hold-transfer-slip.pl).
Test plan:
It is very hard to know all cases (at least 6) where the popup is
displayed. Try at least to get the hold and the transfer confirmation
messages.
You should get the popup if you click on "print slip" button.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It seems that many librarians find it disconcerting to have no feedback
with the new checkouts table. It seems that many of them wait for it to
fully load, check to verify the item was checked out, and only then
check out the next item.
To help alleviate this issue, we can have the checkouts page give
feedback about the item that was just checked out.
Test Plan:
1) Apply this patch
2) Check an item out
3) Note the message "$title ($barcode) due on $date_due"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This works well and fixes a very problematic issue with the new AJAX
circ. I will be submitting a follow-up which I think is an improvement
to the display.
Signed-off-by: Jason Burds <jburds@dubuque.lib.ia.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch uses the same method as bug 13894.
Important note: This will modify the UI.
The patron list will now be displayed in a table (instead of a select).
Test plan:
1/ Search for a patron using the checkout tab
2/ The patron list should appear correctly
Test with different type of search (returns 0, 1, 1+ results).
No behavior changes should be observed.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
works as expected
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Using the autocomplete feature in the patron search, if one value is
missing (i.e. country), it will be replaced with 'null'.
The default value should be an empty string.
Test plan:
0/ Enable the patron autocomplete feature
1/ Create a patron without value for country, address, zipcode, city
2/ Go on the circ home page
3/ Search for this patron. The country should not have been replaced by
"null".
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The pref AddPatronLists does not work as expected if 'generic' is
selected.
Indeed a patron should be linked to a valid patron category (see the
constraint borrowers_ibfk_1 in the DB structure).
Test plan:
0/ Confirm that the AddPatronLists does not work as expected if you choose
the generic patron types.
1/ Delete all you patron categories and check that the interface invites
you to create one.
2/ Confirm that you are able to create a patron and to link it to a patron
category you have created.
I could not verify step 1/, because at least one Patron category
can not be deleted (Staff, since I'm logged in as a Staff patron
and you can not delete categories that are in use).
Tested 0/ and 2/
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test Plan:
- Create an overdue item.
- Navigate to overdue circulation report (Home -> Circulation -> Overdues)
- Notice there is no card number showing in the Patron column.
- Apply patch.
- Refresh page.
- Notice there is a card number showing in the Patron column.
Signed-off-by: Justin <justinvos@live.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The circulation page has a new entry: a link to a list of the pending
in-house use.
Bug 10860 introduces a new way for managing in-house uses.
This patch adds a new page (from the circulation home page) to list all
pending in-house uses.
Test plan:
Go on the circulation home page and click on the in-house use link.
Verify all your in-house uses are listed and information are consistent.
Bug 11201: Display lib instead of AV code
This patch assumes that items.location is linked the the LOC
authorised values.
Signed-off-by: Nicole <nicole@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To get rid of SQLHelper, we should not use this C4::Members::Search anymore.
Test plan:
0/ Enable the CircAutocompl pref
1/ Go on the circulation home page, or the reserve page
2/ Search for a patron and wait for the autocompletion box
3/ Confirm there is no regression
Works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This will remove the restriction that forces the due date for
an on-site checkout to the end of the current day.
It will still suggest the end of the day, but you will be able
to change the date to whatever you want using the datepicker
widget.
To test:
Before applying the patch:
- Turn on OnSiteCheckouts and OnSiteCheckoutsForce
system preferences
- Check the on-site use checkbox and try to set due date
manually, it should not be possible
- Check out the item and check the due date is set to the
end of today
- Put a restriction on your patron account and repeat steps,
the item checked out should again have a due date at the
end of the day
> There should be no way to be able to check out an item
with a 'custom' due date
Apply the patch:
- Repeat steps from above, check out
- on-site use without a restriction on your account
- without changing the due date
- with a due date picked with the datepicker
- on-site use with a restriction on your account
... see above
- no on-site use but with a specified due date
- no on-site use, not specifying a due date
- Turn off SpecifyDueDate
- on-site use with and without restriction should
set the due date automatically to the end of the date
now, altering the due date should not be possible.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Added small patch to allow barcode as input in TransferSlip routine, mostly
to allow generating transfer slips where only barcode is present (aka.
javascript).
Test plan:
1) find book with <barcode> and <itemnumber>
2) generate transferslips with both:
transfer-slip.pl?transferitem=<itemnumber>3967925&branchcode=MPL&op=slip
transfer-slip.pl?barcode=<barcode>&branchcode=MPL&op=slip
and verify that the generated slips match.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Edit:
- Added tests in t/db_dependent/Circulation_transfers.t
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Passes tests and QA script.
Works with both itemnumber or barcode as described.
Tested printing transfer slips with the URL examples given
and in the UI.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It seems odd that only the holding libraries are listed on the holds
ratios report, we should add the home libraries as well.
Test Plan:
1) Apply this patch
2) Run the hold ratios report
3) Note the new home libraries column
Signed-off-by: Heather Braum <hbraum@nekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
The holds ratio report ignores ordered items. This could cause a library
to inadvertently order more copies of a title than they actually need.
An option should be added to count ordered items ( i.e. any negative
notforloan value ).
Test Plan:
1) Apply this patch
2) Create a record with two items, one regular, one ordered.
3) Place 3 holds on the item
4) Run the reserve ratios report, by default you should see this record
5) Check the new 'include ordered' checkbox, rerun the report
6) Note that record is no longer displayed
Signed-off-by: Heather Braum <hbraum@nekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
One day late patrons were restricted even with dropbox mode activated
1) Check in the calendar (Tools/Calendar), that the
previous days you are about to use as date due are
really entered as opening day (never know).
2) Add a suspension in the suspension days parameter
of the circulation rules (Administration/Circulation
and fine rules) to the MOST specific category of
borrower and MOST specific type of document among the
existing rules of the LOGGED IN Site(cf explications
in the circ-rules page).
3) Choose a borrower using the search by category and an
item through the advanced search using the limit by type.
4) Checkout the item selecting the previous opening date
in the Specify-due-date box.
5) Click on Circulation in the upper menu, then on Checkin
and check the Book drop mode. The Book drop date showed
should be the previous opening date.
6) Check in the item : you can see that the patron is restricted
7) apply the patch
8) Redo 1 to 5 : Now, you can see that the patron is not restricted.
9) If you redo the test with two day late, you will see that
the patron is not restricted : that's ok because his
restriction of one day is already finished.
10) If you redo the test with more than two day late, you see
that the patron restriction is, as expected, one day shorter
than it were if the item had been returned without dropbox mode.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 9811 removes useful code.
Actually the AddPatronLists pref is not sent to the template from
members/member.pl.
To fix this issue, we can use the existing not clean way, or compare the
syspref value directly in the template. This second solution is
implemented in this patch.
Test plan:
1/ Set the AddPatronLists pref to 'specific'
2/ On the patron home page (members/members-home/pl), the patron search
result page (members/member.pl after launching a search) and on the
checkouts page/patron search result (circ/circulation.pl after searching
a patron using the check out), verify that the patron category list is
the specific ones.
3/ Test there are no regression with the AddPatronLists pref set to
'general'.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described and fixes the problem.
Note: I am not sure if AddPatronLists makes sense -
if you set it to general patron types, it still preselects the
wrong category type (tried organization, a child patron category
was selected). Also the name is confusiong nowadays with the
Patron list feature.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
According to the manual, "Items will stay in the PROC location until
they are checked in".
This is not the actual behavior. Right now items will only change from
PROC to CART, and that is only if InProcessingToShelvingCart is enabled.
Some libraries want to use the PROC to permanent location feature,
without using the CART.
Additionally, the location is only removed if using returns.pl, but
that is not what the manual says either. What if the library uses
SIP2 devices for handling returns? This should be taken into
account.
Test Plan:
1) Apply this patch
2) Set an item's current location to PROC, and it's permananet location
to a different location.
3) Check the item in any way you wish
4) Note the shelving location is updated to the permanent location
5) prove t/db_dependent/Circulation/Returns.t
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I tested this with items which had items.location set to 'PROC' and
items.permanent_location set to NULL, '', and a real value, and it
worked correctly in all cases. I tested with check-ins from returns.pl
and from the table of checkouts in circulation and the PROC location was
correctly removed in both cases.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a better check in message for patrons with indefinite restriction.
To test:
Check out an item to a patron.
Add a manual restriction without expiry date to that patron.
Check in the item.
Without patch, the checkin message reads:
Reminder: Patron was earlier restricted until 9999-12-31
Apply patch and repeat steps above.
The message should now read:
Reminder: Patron has a restriction (no expiry date)
NOTE: Changed wording at two places following Owen's suggestion. New: "Patron
has an indefinite restriction"
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Thanks Marc for catching this case. I was thinking like you that the wording
sounded strange while playing with bug 13242. Merge the original patch and the
followup, containing a better wording, thanks to Owen comment.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If you have the SpecifyDueDate preference disabled and check something
out as an on-site checkout the due date seems to follow the default
circulation rule rather than restricted the checkout to that day.
Test plan:
0/ Disable SpecifyDueDate and enable OnSiteCheckouts
1/ Check an item out to a patron and check the 'On-site checkout'
checkbox
2/ Verify (screen and DB) that the due date is correct (today 23:59)
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes some minor updates to the output of the holds awaiting
pickup report. To test you should have several holds which are marked as
"waiting," including some which have been waiting longer than the number
of days specified in the ReservesMaxPickUpDelay system preference.
- Go to Circulation -> Holds awaiting pickup
- In both the "waiting" and "over" tabs, confirm that titles display any
associated subtitle
- Confirm that library name is shown instead of library code
- Confirm that the patron name mailto: link works correctly
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Works as described: subtitle displayes (if mapping defined), library name
instead of code, and email as clickable mailto.
Remark 1: As for bug 13083, subtitle display is not as good in UNIMARC than in
MARC21, since subtitle is not separated from title by ':'.
Remark 2: 'subtitle' field is retrieved from a field mapping. Taking a look at
C4::Biblio::GetRecordValue, one see that the fieldmapping is directly queried.
There isn't any caching system, like for frameworks.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described and passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Trusting the sign off on the other page, I only tested the QA changes
Signed-off-by: Cindy Murdock Ames <cmurdock@ccfls.org>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Test Plan:
In "Tools" -> "Rotating Collections" -> "Add/Remove items":
When adding item barcodes to the collection, the input field
<input type="text" id="barcode" name="barcode">
should become active
automatically so it is easy to add multiple barcodes rapidly without touching the
mouse or keyboard.
Enter-press is dealt by the barcode reader so automatic form submittal should be handled
by the barcode reader.
In "Rotating collections" -> "Transfer Collection":
When the collection is initially transferred, items are set to trasfer correctly.
When the collection is transferred while items are still being transferred, the transfer
destination library doesn't change from the original one.
The holding library changes for all items in the collection to the destination library on
retransfers as well.
This is tricky if a user accidentally places the wrong destination.
When I try to checkin these items to their new retransfer location, I get the following messages:
-"This item is part of a rotating collection and needs to be transferred to <original transfer destination>"
-"Please return Valkoinen ihmissyj / to <original transfer destination>"
-"Print slip or Cancel transfer"
When I checkin a Item to a arbitrary branch, I get the following messages:
"This item is part of a rotating collection and needs to be transferred to <retransfer destination>"
"Please return Valkoinen ihmissyj / to <original trasfer destination>"
Bug 8836 - Resurrect Rotating Collections - QA Followup
Bug 8836 - Resurrect Rotating Collections - Followup 2 - Perltidy rotating collections scripts
Bug 8836 - Resurrect Rotating Collections - Followup 3
* Fix bad TT Tag
* Fix bad sql query
* Fix capitalization ( HTML4 )
* Allow a rotating collection's location to keep AutomaticItemReturn
from sending it back to the branch of origin
* Fix bad query
Bug 8836 - Resurrect Rotating Collections - Followup 4 - Autofocus on barcode field
Bug 8836 - Resurrect Rotating Collections - Followup 5 - Don't transfer issued and waiting items
Items in a rotating collection are automatcially transferred when a
collection is transferred. This is a problem for currently checked out
items and items on hold marked as "Waiting".
This patch resolves this issue by skipping the transfer for those items.
When the items are then returned, the librarian will be alerted to
transfer the item to the library currently holding that rotating
collection.
Bug 8836 - Resurrect Rotating Collections - Followup 5 - Link collections.colBranchcode to branches.branchcode
Signed-off-by: jmbroust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Cindy Murdock Ames <cmurdock@ccfls.org>
http://bugs.koha-community.org/show_bug.cgi?id=8835
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Bug 11703 breaks the checkouts export feature.
To reproduce: Fill the ExportWithCsvProfile pref and go on the
circ/circulation.pl page. The export column appears, but not the export
button.
Test plan:
Go on the checkout list (circ/circulation.pl and members/moremember.pl)
and verify the export column and the export button appears.
If you click on the button, a file should be generated.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This doesn't depend on anything other patch.
1. Create a reservation for a Borrower with pickup branch
2. Check-in the corresponding Item in the pickup branch and confirm the hold
for the Borrower
3. Go to circ/circulation.pl for the Borrower and verify that the reservation
is "Waiting for pickup"
4. In the Borrower -> Check Out -tab (circ/circulation.pl) on the right of the
big "Checking out to borrowername" should be a notification about holds ready
for pickup.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Rafal Kopaczka <rkk0@poczta.onet.pl>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, restores the old code and behaviour.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fixing some simple display issues caused by missing/misnamed
variables, probably consequence of the renaming before.
Amended test plan:
- Make sure that if OnSiteCheckoutsForce is set, you can
still perform onsite checkouts and only those.
- Check the detail page in staff says *currently in local use by*
for an on-site checked out item
- Check the detail page in OPAC with OPACShowCheckoutName active
for the same.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
