Same as bug 16748, for batch renew.
Test plan:
Check an item in
Renew it using the circ/renew.pl page
=> You can pick a due date!
=> The date is kept from one renew to another
Renew it until you reach the maximum number of renewals
=> You get a warning with "continue without renewing"
=> The date is still kept
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Set 'ShowAllCheckins' to show
2 - Set a collcection code for an item
3 - Check it in
4 - Note it displays in the the 'Item type' column
5 - Apply patch
6 - Check it in again
7 - Note the new 'Collection' column
8 - Hide/show the column using column visibility on the checkins page
9 - Go to Admin->Configure columns
10 - Test the various settings for this column and check in the item to
make sure they work as expected
Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It adds a new localization directory that could
host a custom SQL file for each language,
xx-YY/custom.sql
This will be the last file to be loaded at
install time, it can be used to set any difference
from default values.
It can't be deselected at install time.
Moved corresponding files for de-DE, it-IT,
nb-NO and completed es-ES
To test:
1) Apply the patch
2) Install es-ES/de-DE/it-IT/nb-NO translation (any lang)
( cd misc/translation; ./translate install es-ES )
3) Do a clean install using es-ES
4) After all files have been loaded check:
* A new section labeled "Localization data added"
with one file, custom.sql
* Inspect the value of FrameworksLoaded syspref,
last entry must be custom.sql
5) Remove/rename the file or localization dir and
repeat 3/4, install must proceed normally
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We used to test rule scopes by explicitly defining each combination.
When adding new scopes, it is much easier if these tests are auto-
generated for you so that you don't have to repeat similar code.
This patch removes those "duplicates" and adds a method that returns
test cases for each scope as follows:
branchcode categorycode itemtype
__________ ____________ ________
branchcode categorycode itemtype
branchcode categorycode *
branchcode * itemtype
branchcode * *
* categorycode itemtype
* categorycode *
* * itemtype
* * *
And automatically extends the test when new scopes are added.
This also obsoletes the "Get effective issuing rule in correct order"
test in t/db_dependent/Koha/IssuingRules.t
To test:
1. prove t/db_dependent/Koha/CirculationRules.t
Sponsored-by: The National Library of Finland
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
JD amended patch: perl tidy
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The try to implement correctly the REST API endpoint for authorised
values failed.
This patch uses an easy to implement svc script for the POST route.
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sponsored-by: Orex Digital
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sponsored-by: Orex Digital
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sponsored-by: Orex Digital
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
Same as the first patch but when cataloguing an authority record
Sponsored-by: Orex Digital
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We do a bit of refactoring to make the code reusable.
Test plan:
Same as the first patch but when adding/editing an item
QA note: There is a warning from the QA tools
FAIL koha-tmpl/intranet-tmpl/prog/en/modules/cataloguing/additem.tt
FAIL js_in_body
A <script> tag found inside head, must be moved to the body (see bug 17858)
I don't think how we could avoid it.
Sponsored-by: Orex Digital
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This whole patch set adds the ability to create a new authorised value
directly from the cataloguing module.
It will prevent the cataloger to leave and reload the page if they need
a new one.
Test plan:
If you are logged in with a patron with the manage_authorised_values
subpermission you will be able to:
* Edit a bibliographic record
* Search for a subfield linked to an authorised values (not the "fake"
AV like itemtypes, branches, cn)
* Click the dropdown list and start searching for a value that does not
exist
* Click enter
* Fill the fields in the popup
* Save
=> Your dropdown list has the new AV :)
Note: This does not work for the advanced editor. It does not have
select2 applied to the selects. I have hardly tried but failed.
Sponsored-by: Orex Digital
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes to general changes. First, it makes some minor style
changes to the appearance of the dropdowns. Second, it moves the JS
content in select2.inc into a separate JS file. This is made possible by
Bug 21156.
To test, apply the patch and view a page which uses the Select2 library,
e.g. the add item screen. Confirm that the Select2-styled dropdowns look
good and work correctly.
TESTING TRANSLATABILITY
- Update a translation, e.g. fr-FR:
> cd misc/translator
> perl translate update fr-FR
- Open the corresponding .po file for JavaScript strings, e.g.
misc/translator/po/fr-FR-messages-js.po
- Locate strings pulled from
koha-tmpl/intranet-tmpl/prog/js/select2.js for translation,
e.g.:
msgid "No results found"
msgstr ""
- Edit the "msgstr" string however you want (it's just for
testing).
- Install the updated translation:
> perl translate install fr-FR
- Switch to your newly translated language in the staff client and
test a Select2-styled dropdown. Test that translated strings appear.
For example:
- Use the filter form to search for a string which isn't found. You
should see a translated version.
- Make a selection in one of the dropdowns. Hover your mouse over the
"X" icon which now appears. The tooltip should be a translated
version.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This will set a correct width by default.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We want to restore the previous behaviour and keep the options closed when
clear is clicked
https://github.com/select2/select2/issues/3320#issuecomment-621662039
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds specificty to the CSS which controls the "invalid"
appearance of a Select2 dropdown so that the use of "!important" can be
avoided. The patch also puts this style into our custom select2 CSS file
so that it is located with other Select2 style changes.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In the previous version of Select2 we had only 1 'a' tag that was
visible, next to the invisible select.
Now we have a 3 nested span elt, the last one (with a role=combobox
attribute) is the one we want to style.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The way we defined the default values does not longer work (?)
Using
$.fn.select2.defaults.set
instead of
jQuery.extend($.fn.select2.defaults, {
fixes the problem.
It restores the allowClear setting.
There is a change in the behavior here, the selection opens when the
clear button is clicked. That is coming from a change in Select2
apparently. We may want to hack something to restore the precedent
behaviour.
This patch also removes the redefinition of the width. It seems that the
issue that this code was trying to correct is now fixed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In order to benefit from the last feature of Select we should upgrade to the version 4.
For instance it adds the ability to dynamically create new entries
https://select2.org/tagging
Test plan:
Confirm that there is no visible regression on dropdown list with select2
Like edit a bibliographic records, and the items.
Sponsored-by: Orex Digital
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes the use of the jquery.checkboxes plugin from the
inventory page and replaces it with custom JS.
To test, apply the patch and go to Tools -> Inventory.
- Submit the form with some selections which will return results on the
following page. I filtered by library.
- On the page showing results, test that the "Select all" and "Clear
all" links work correctly.
Signed-off-by: Brandon J <brandon.jimenez@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We must redirect them to /dev/null if we know they will appear.
Test plan:
prove the different test files and confirm that the output is clean when
this patch is applied
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is no reason that MarcItemFieldsToOrder should force librarians
to select a ccode and notforloan value for each item.
They are both optional fields.
As with location, the first value should be an empty 'none' option.
Test Plan:
1) Set up MarcItemFieldsToOrder, do *not* set mappings for ccode and notforloan
2) Add an order record to a basket that uses MarcItemFieldsToOrder
3) Note you must choose a ccode and nfl value
4) Apply this patch
5) Reload the page
6) Note you no longer have to select values for ccode and notforloan
Signed-off-by: Daniel Gaghan <daniel.gaghan@pueblolibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Unset label width restriction: The label width restriction within
fieldsets causes issues for the datatables header. Unsetting it
explicitly here resolves the line wrapping issues :)
Reset margins for datatables found inside fieldsets such that the
datatable properly utilises the available space and restore the
default datatable label font weights.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
1) Turn on system preference SelfCheckReceiptPrompt
2) Check out item via /cgi-bin/koha/sco/sco-main.pl
3) Click "Finish"
4) Click 'Print receipt and end session'
5) Notice two print dialog boxes right on top of each other
6) Apply patch
7) Repeat steps 1 - 4
8) Should only get a single print dialog.
9) Test in FF/Chrome and make sure behavior is consistent
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The 'summary' field in the patron information request specifies if detail information should be send for holds,
overdues, fines, etc. The field is 10 characters in length (0-9). However, the SIP2 spec only defines indexes 0
though 5, leave 6 though 9 undefined. Some ILSs specify behavior for these undefined indexes. Apparently the
7th field is often used to request 'Fees', as opposed to 'Fines' in some ILS. Some software that integrate via
SIP try both the 5th and 7th indexes to ensure they get all fines and fees.
The problem is that Koha's SIP server crashes if any 'summary' index beyond 5 is flagged. We should simply
ignore flags beyond 5 and act as if no flags were sent.
Test Plan:
1) Enable SIP for your instance
2) Send a patron information request with a summary flag in any index beyond 5.
i.e.: 6300120200617 124846 Y AOMIDAY|AA21030050054321
3) Note the SIP server just closes the connection without a response
4) Apply this patch
5) Restart the SIP server
6) Send the same request
7) Note you get back the patron information response!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jeff Gaines <jgaine@arlingtonva.us>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This appears to be a bug due to inaccuracies in floating point math. I've been unable to reproduce it on demand. Sometimes when using the "Write off selected" button, Koha will give the error that the payment is more than the amount owed, even though they are the same. The solution I've implemented is to move the summation from Perl code to the database query. This video demonstrates the issue and afterward, shows the error goes away after the patch is applied: https://monosnap.com/file/pG69HC7iI9mU9kkuoCtbkVzVTffKlE
Test Plan:
1) Apply this patch
2) Restart all the things!
3) Verify that "Write off selected" functions as usual
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is just a guess! One of our tests is failing since today and we
don't modify anything in this area.
My guess is that the service is now returning the normalized version of
the ISBN
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is complementary patch using styling from
bundled /xt/perltidyrc file
Almost no code change except a few long constant strings
broken to parts by concatenation.
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Inside of ItemsAnyAvailableAndNotRestricted was no effect from main set
of smart rules (per record and other limits): i.e. call to
"CanItemBeReserved" was absent totally.
Because of this there was a bug: for example none of two items were
allowed to be held when first was allowed by one smart rule, BUT on loan,
and second was disallowed by another smart rule (for example,
0 "Holds per record"),
i.e. in this case both items unavailable: so on-shelf holds setting
"allow hold if all unavailable" should allow to hold first one, and not
the second one. But it was that both wasn't allowed to be held.
Solution: call to sub "CanItemBeReserved" added so it checked for
"...->{status} ne 'OK'" so now if item restricted by smart rule it also
accounted as "unavailable" and "AnyAvailavble" not counts it.
How to reproduce:
1. Add 2 smart rules (/cgi-bin/koha/admin/smart-rules.pl) with "on shelf
holds": "if all unavailable" for all rules, no "item level holds", and
set "holds per record" to 2 for "books" and "0" for "computer files".
2. Create only 2 items for one biblio, but different types, "book"
and "computer file". For example in misc4dev env:
/cgi-bin/koha/cataloguing/additem.pl?biblionumber=1#additem
3. Check out that item of type "book" to some person, for example,
in misc4dev:
/cgi-bin/koha/circ/circulation.pl?borrowernumber=2&barcode=3999900000001
4. Open reserve/request, for example, for item 1 and patron 1 in misc4dev
env (/cgi-bin/koha/reserve/request.pl?biblionumber=1&borrowernumber=1)
5. It does not allow to hold, both red crossed, but computer file says
"Exceeded max holds per record" because of "0" limit set on step 1.
6. Apply the patch.
7. Reload page on step 5 and see that "book" will be available for hold,
but "computer file" still will be red-crossed "Exceeded max holds
per record", now that's correct because both items unavailable:
one because on load, another because of "0" limit for computer files.
8. Check-in book from step 3 so it will be returned to the library,
9. Reload page on step 5 and see that again no any holds available,
but it's now also correct: "book" now returned but "on shelf holds"
set to "if all unavailable".
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Add cut-off shortcut (return from inside the loop) when first
"Any Available And Not Restricted" item found, because one is
enough for "Any".
Testing: no change visible for code behavior/results,
it is just faster because won't loop over the whole set.
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Naming mistake came because this sub is used to detect if anything
available for hold, but it used in "if ANY UNAVAILABLE rule", so actually
results of this sub negated (see below "return" in the code).
In details:
when previous refactor was done, name for subroutine was chosen
wrongly in "opposite" direction from what it actually does:
it was named "ItemsAnyAvailableForHold", but this subroutine gave
truth (1) if at least one of the items available on shelf, not lost,
not on loan, not held, and not restricted by smart rules and damaged
status. So, if this sub says that item is still "available", this
actually PREVENTS item from hold in parent sub (see negated return):
sub IsAvailableForItemLevelRequest {
...
my $any_available = ItemsAnyAvailableAndNotRestricted...
return $any_available ? 0 : 1;
# ^^^ if any available and not restricted - we don't allow
# on-shelf holds
...
I.e. like it named now: "ItemsAnyAvailableAndNotRestricted".
Small aside fix: white space for '&&' inside brackets added to join
operation by priority visually.
Testing plan not needed: all places where sub used it just renamed.
More: all this places/code was introduced in one older commit so there
is also no overlaps or other calls/uses for this subroutine.
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The cash register summary page for cash management is available for users
with the 'anonymous_refund' or 'cashup' permission and the actions available
are appropriately displayed.
However, the actions are not yet correctly tested for at the server and
so a user may force submit to accomplish the action.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The libraries summary page for cash management is available for users
wit the 'anonymous_refund' permission to allow them to navigate to
alternate cash registers and search for the prior transaction to refund.
However, currently the cashup option appears, and is not blocked at the
server, for all user who may access the page. It should be blocked for
those users without the 'cashup' permission.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It was there already but not at the same place!
Signed-off-by: Didier Gautheron <didier.gautheron@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Trying to know if the logged in patron is the one we are expecting to
(well, we are not expecting anybody to be logged in at this point!)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
A series of accountlines added to mock credits were being added with a
debit_type_code instead of a valid credit_type_code and so were being
mis-identified by the new credit numbering code trigger in the store
routine.
This patch updates the test to correctly identify the credits as credits
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On "Bug 25964: Prevent data loss when editing items from a MARC record"
we picked paidfor as an example, but it has a specific behaviour and is
now handled in Koha::Item->store.
Let's pick another one, new_status
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When 'RefundLostOnReturnControl' is set to 'CheckinLibrary' but
return_branch is passed as undefined we should fallback to
'ItemHomeBranch' before falling back to the default rule.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a test to ensure that the 'Koha::Item->store' method
will function when the userenv is not set
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The ModItem test found in t/db_dependent/Items.t was a duplciate (but
slightly less functional) for the test we introduced for the *_on
trigger functionality in t/db_dependent/Koha/Items.t::store
The failure was a missing C4::Context mock, but the logical fix is to
simply remove the duplicate test.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
