Currently when a reserve is moved to "waiting" status because it's
acknowledged on checkin, the reserve priorities aren't renumbered. This
causes things to go a bit haywire in the UI, in particular, some
reserves can unjustly end up with priority 1 when they shouldn't. It
also seemed to mess with the logic of who should get it next, but I
didn't look too closely at that.
This patch forces a renumbering so that all the priorities remain
copacetic.
Test plan:
* have a few borrowers, say 4.
* have a biblio with a single item (you can scale this up, it should
work just the same.)
* issue the item to borrower A
* have borrowers B, C, and D place a hold on the item
* return the item, acknowledge that it'll be put aside for B.
* view the holds on the item.
Without the patch:
* the hold priorities in the UI end up being "waiting, 2, 1" when they
should be "waiting, 1, 2".
* in the database "reserves" table, they're really "0, 2, 3" when they
should be "0, 1, 2".
With the patch:
* the hold priorities in the UI end up being "waiting, 1, 2"
* in the database, they're "0, 1, 2"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan confirms that the problem exists and that the patch corrects
it.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, especially t/db_dependent/Reserves.t.
Improves priority calculation.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
C4::Circulation::CanBookBeRenewed called C4::Members::GetMemberDetails to
retrieve categorycode and branchcode.
- categorycode is used to retrieve the issuing rule
- the borrower information is passed to
C4::Circulation::_GetCircControlBranch. Which only uses the branchcode
parameter.
GetMemberDetails does a lot of calls/queries (patronflags,
account, etc.) that are not needed by CanBookBeRenewed.
This patch replaces it with a call to C4::Members::GetMember.
Note: I presented this small optimisation during a quick introduction to
NYTProf (hackfest 14 in Marseille).
Test plan:
- launch member unit tests
- check the code
Checking the code resulted in the following:
CanBookBeRenewed builds a hash reference from the borrowernumber
(2482). Note it is only used in this function and not passed in.
_GetCircControlBranch (2485) requires that hashreference to
have a branchcode key. As stated above.
The following line (2486) requires it have a categorycode key.
As such, C4::Members::GetMemberDetails is confirmed to be
overkill, and C4::Members::GetMember is sufficient.
Testing Done
------------
0) Back up DB
1) Make sure MPL is in the list of libraries.
2) Apply the patch.
3) run the koha qa test tool
4) prove -v t/db_dependent/Circulation.t
Patch applies cleanly. QA Test tool was all OK. All tests ran successfully.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10649 introduced a new include file for adding DataTables-related
JavaScript assets. This patch adds use of this include file to all
circ-related pages which use DataTables.
Apply the patch and test the following pages to confirm that table
sorting works correctly:
- Circulation
- The UseTablesortForCirc system preference must be enabled.
- Check out to a patron with existing checkouts. Choose a patron who
is a guarantor to another patron with checkouts in order to test the
relatives' checkouts table.
- The checkouts and relatives' checkouts tables have been modified to
exclude articles when sorting of titles.
- Hold ratios - The title column has been configured to exclude articles
from sorting
- Transfer to receive
- Holds queue
- The title column has been configured to exclude articles when
sorting
- The date column has been modified to use the title-string filter for
sorting. An unformatted date is now passed from C4::HoldsQueue.pm to
the template, where the KohaDates filter is used for formatting.
Sorting is based on the unformatted date.
- Holds awaiting pickup
- The "available since" column has been configured for sorting on an
unformatted date. waitingreserves.pl now passes the unformatted
date to the template, and formatting is done using the KohaDates
filter.
- The title column has been configured to exclude articles when
sorting.
Edit: Rebased on current master following commit of Bug 11605
Signed-off-by: A. Sassmannshausen <alex.sassmannshausen@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch modifies GetSoonestRenewDate() so that it returns
undef if the patron, item, or loan cannot be found. This
better reflects the usage of this routine GetSoonestRenewDate(),
as none of its callers tried to check the second return
value containing an error code.
This patch also updates the POD to match.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch modifies CanBookBeRenewed, so that based on
issuingrules.norenewalbefore a new error "too_soon" can be returned.
Also adds a new subroutine GetSoonestRenewDate.
To test:
1) Create an issuing rule with "No renewal before" set to value X
and "Unit" set to days.
2) Test the following steps for both:
Home > Patron > Patron details
Home > Circulation > Checkouts
3) On the checkout page, test for today's issues as well as previous
issues. (Check something out on one day and something else on the
next day, then do the testing.)
4) Confirm that items can't be renewed if current date is more than
X days before due date.
5) Confirm that the date and time of the soonest possible renewal are
displayed in the format specified by global sysprefs "dateformat"
and "TimeFormat".
6) Confirm that items can be renewed if "No renewal before" is
undefined or current date is X or less days before due date.
7) Confirm that if the number of allowed renewals is exceeded
"Not renewable" is displayed, no matter what "No renewal before"
is set to.
8) Test the same things with "Unit" set to hours.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
The WHERE clause should not erase $query.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This adds the ability to specify whether staff, OPAC,
or slip news entries apply to all libraries or just a
particular library.
With the branch parameter added to key functions in
C4/NewsChannels.pm, function calls in C4/Members.pm,
mainpage.pl, opac/opac-main.pl, tools/koha-news.pl, and
t/db_dependent/NewsChannels.t were needed.
Some license texts were updated.
Templates were modified to display, allow for entry and editing
of the branches selected.
TEST PLAN
---------
1) Having logged into the staff client, is the news displaying
correctly? Have you entered a news item which should not
display for this branch of logged in user?
2) Find a patron (with some items checked out?)
3) Print a slip
- News which is labelled 'All Branches' or for the same branch
as the one printing the slip should display on the slip.
- THIS DOES NOT AFFECT QUICK SLIPS
4) Home -> Tools -> News
- Can you edit a news item?
- Does the change save correctly?
- Can you filter based on location and branch correctly?
- Can you add a new entry correctly?
- Can you delete an entry correctly?
5) Open an OPAC client.
- Does only the news for all branches display?
6) Log into the OPAC client.
- Does the news for all branches and the specific branch display?
7) prove -v t/db_dependent/NewsChannels.t
- Does it run and all succeed?
- Does the code seem to catch the required cases?
8) Comparing the patched and unpatched versions of files affected,
are the license changes missing anything?
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Changed the add and update functions to use a hash reference
for the parameter, so that adding or subtracting parameters
should be easier. Added some POD for the add_opac_news and
upd_opac_news functions, so that developers would know how to
call it.
The hashref changes resulted in being able to return 0 for
failure and 1 for success. This meant adding a couple tests
to the test file.
And while testing, there was some sort of logic problem with
the matter of '' being all, but selecting all only showed
things set for all, and excluded particular languages, or other
interfaces.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
"When all the data has been fetched from a SELECT statement,
the driver will automatically call finish for you. So you should
not call it explicitly except when you know that you've not
fetched all the data from a statement handle and the handle
won't be destroyed soon."
(http://search.cpan.org/~timb/DBI-1.627/DBI.pm#finish)
All the $sth variables were scoped within the functions,
and would be destroyed immediately. Additionally, there was
one after a SELECT, for only a single idnew, and so it was
not necessary.
TEST PLAN
---------
1) prove -v t/db_dependent/NewsChannels.t
2) apply patch
3) prove -v t/db_dependent/NewsChannels.t
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
ok 1 - use C4::NewsChannels;
ok 2 - Successfully added the first dummy news item!
ok 3 - Successfully added the second dummy news item!
ok 4 - Successfully updated second dummy news item!
ok 5 - Successfully tested get_opac_new id1!
ok 6 - Successfully tested get_opac_new id2!
ok 7 - Successfully tested get_opac_news!
ok 8 - Successfully tested GetNewsToDisplay!
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Grabbed the current license from
http://wiki.koha-community.org/wiki/Coding_Guidelines#Licence
and changed the use strict; use warnings; into a
use Modern::Perl instead.
TEST PLAN
---------
1) Log into staff client.
- Does news look okay?
2) Apply patch
3) Refresh staff client.
- Does news look the same?
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Safe no op action
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes an issue originally reported by bug 11702.
RM note: the patch is clear enough and doesn't break existing tests,
but on the other hand, I have been completely unable to reproduce
the original issue.
To test:
[1] Verify that prove -v t/db_dependent/Holds.t passes
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When calling C4::Context::Zconn twice with different parameters,
the same ZOOM::Connection object is returned twice (parameters
of 2nd call are not used) This patch fixes that.
This is in part because the connection cache is keyed on server
name only. This patch corrects this by keying on all parameters.
TEST PLAN
---------
1) apply patch
2) run koha qa test tools
3) prove -v t/Context.t
The unit tests properly triggers the modified routine for
testing. Additionally, in hunting for ways it could break,
no nested synchronous or asynchronous Zconn's were found.
And even if they were, the keying on all parameters should allow
it to function properly without messing up the other connection.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When the ability to stage authority records was added to Koha, sorting
record batches by citation ( i.e. title ) caused the addition of
"authorized_heading" to be added to the sort. When sorting by title
descending, this causes the order by clause to be "title,
authorized_heading DESC" which means sort by title ASC, then
authorized_heading DESC. This is incorrect and causes regular biblio
batches to always be sorted ascending.
Test plan:
1) Stage a batch of biblio records from a file
2) View the staged batch
3) Attempt to sort by title descending
4) Note it is still sorted by title ascending
5) Apply this patch
6) Note the sorting now works correctly
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Works as advertised. The code pertaining to sorting in routine
GetImportRecordsRange will probably not win beauty prizes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Koha Team Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Added Sign off line.
Passes all tests and QA script, including t/db_dependent/Serials.t
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10649 introduced a new include file for adding DataTables-related
JavaScript assets. This patch adds use of this include file to all
circ-related pages which use DataTables.
Apply the patch and test the following pages to confirm that table
sorting works correctly:
- Reports -> Guided reports -> Use saved
(reports/guided_reports.pl?phase=Use saved):
"Creation date" sorting has been reconfigured to use the title-string
method for sorting on an unformatted date. C4:Reports::Guided.pm has
been modified to pass an unformatted date to the template. Sorting
should work correctly for all settings of the dateformat system pref.
- Reports -> Catalog by item type
(reports/manager.pl?report_name=itemtypes)
- Reports -> Serials statistics wizard (reports/serials_stats.pl):
The subscription begin and subscription end columns have been modified
to use the title-string filter for sorting. An unformatted date is now
passed from reports/serials_stats.pl to the template, where the
KohaDates filter is used for formatting. Sorting is based on the
unformatted date. Sorting should work correctly for all settings of
the dateformat system pref.
- Sorting of titles should now exclude article from sorting.
- Minor template improvements:
- Vendor name now links to vendor details.
- Subscription title now links to subscription details.
- Library name is now shown instead of branchcode.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Checked all pages, no regressions or Javascript errors detected.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan :
- Define a notice containing <<borrowers.streettype>>
- Trigger an event that generate this notice
Without patch <<borrowers.streettype>> is replaced by ROADTYPE
authorised value code. With the patch it is resplaced by its
description
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works as described, passes tests and QA script.
Note: it seems it's not possible currently to use B_streettype from
the interface, but it might be worth adding it as a follow up for later
use.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If GetOrder is called with a nonexistent ordernumber or without any
ordernumber, it should return undef.
Test plan:
prove t/db_dependent/Acquisition.t
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Updated number of tests to 68, tests and QA script all happy now.
Looked at a few pages in aquisition using GetOrder as well.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch finishes the work started in one of the previous
follow-ups and allows CardnumberLength to be set to a value
like ',5'. In conjunction with not including cardnumber in
BorrowerMandatoryField, this allows a cardnumber to not be
required but, if present, to not exceed the specified length.
This patch also updates t/db_dependent/Members.t so that
it runs in a transaction, tests the new return value
of checkcardnumber, and manages the CardnumberLength syspref.
To test:
[1] Verify that prove -v t/db_dependent/Members.t and
prove -v t/Members/cardnumber.t pass.
[2] Set CardnumberLength to ",5" and take cardnubmer out of
the BorrowerMandatoryField list.
[3] Verify that you can save a patron record without a cardnumber,
but if you supply one, that it can be at most 5 characters long.
[4] Add cardnumber back to BorrowerMandatoryField. This time, the
minimum length is 1 even though CardnumberLength is ",5".
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch refactors the previous code and moves the logic from the pl
to a new routine.
Same test plan as previous patch.
/!\ new unit test filename.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 10861: Reintroduced the cardnumber length check (client side)
Previous patches has removed the pattern attribute of the input, it was
not needed. This patch reintroduces it. It will only work for new
browser version.
Moreover, it manages with the ',XX' format (see UT).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Squashed the last two follow-ups. The pattern test did not work fully for me
in Firefox 26 (very recent). But I see the message when I clear the field.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some libraries would like to add a check on the cardnumber length.
This patch adds the ability to restrict the cardnumber to a specific
length (strictly equal to XX, or length > XX or min < length < max).
This restriction is checked on inserting/updating a patron or on importing
patrons.
This patch adds:
- 1 new syspref CardnumberLength. 2 formats: a number or a range
(xx,yy).
- 1 new unit test file t/Members/checkcardnumber.t for the
C4::Members::checkcardnumber routine.
Test plan:
1/ Fill the pref CardnumberLength with '5,8'
2/ Create a new patron with an invalid cardnumber (123456789)
3/ Check that you cannot save
4/ With Firebug, replace the pattern attribute value (for the cardnumber
input) with ".{5,10}"
5/ You are allowed to save but an error occurred.
6/ Try the same steps for update.
7/ Go to the import borrowers tool.
8/ Play with the import borrowers tool. We must test add/update patrons
and the "record matching" field (cardnumber or a uniq patron attribute)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested adding, updating; importing and ran unit test.
Preliminary QA comments on Bugzilla
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The SearchOrders routine should return the booksellerid and this
patch adds it.
This fixes several problems:
[1] The link to the vendor on the order receive page breadcrumbs
was broken.
[2] The tax calculation in finishreceive.pl didn't run.
[3] The item booksellerid field never got updated during
receipt.
Booksellerid was returned before bug 10723.
Quick test plan:
Go on orderreceive.pl and verify that the vendor link is correct.
Followed test plan. Vendor link is now correct.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch also adds POD and UT for the change in SearchOrders()
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The order status ordered is set when the basket is closed.
The parcel page should only display status "ordered" and "partial".
Test plan:
- create a basket.
- create an order.
- verify the order is not listed on the parcel page (i.e. you cannot
receive it).
- close the basket.
- verify the order is listed on the parcel page.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes some dead code concerning the handling of patrons
that are members of other, institutional patrons. This code did not
work; removing it clears the field if somebody wants to do a better
implementation of such relationships between patrons.
This patch:
[1] Removes the memberofinstitution system preference.
[2] Removes the following routines:
C4::Members::get_institutions()
C4::Members::add_member_orgs() (and removing this routine
removes a reference to a borrowers_to_borrowers table that
does not exist).
There should be no changes whatsoever to system functionality with this
patch (with the trivial exception of the absence of the
memberofinstitution system preference).
Test plan:
[1] Look at the code and use grep, git grep, etc. verify this patch
does not remove something in use.
[2] Verify that there are no regressions upon adding or editing
a patron record.
[3] Verify that the memberofinstitution system preference has been
removed
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
DBD::Mysql provides a mysql_auto_reconnect flag. Using it avoids
the time required to do a $dbh->ping().
Benchmarks:
use Modern::Perl;
use C4::Context;
for ( 1 .. 1000 ) {
$dbh = C4::Context->dbh;
}
* without this patch on a local DB:
perl t.pl 0,49s user 0,02s system 98% cpu 0,525 total
* without this patch on a remote DB:
perl t.pl 0,52s user 0,05s system 1% cpu 37,358 total
* with this patch on a local DB:
perl t.pl 0,46s user 0,04s system 99% cpu 0,509 total
* with this patch on a remote DB:
perl t.pl 0,49s user 0,02s system 56% cpu 0,892 total
Testing the auto reconnect:
use Modern::Perl;
use C4::Context;
my $ping = $dbh->ping;
say $ping;
$dbh->disconnect;
$ping = $dbh->ping;
say $ping;
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Real improvement. No koha-qa errors
prove t/db_dependent/Circulation_issuingrules.t produces no error
prove t/db_dependent/Context.t produces no error
Test
1) dumped Koha DB, load it on a non-local server
2) run sample script whit and without patch, local and remote
use Modern::Perl;
use C4::Context;
for ( 1 .. 100000 ) {
my $dbh = C4::Context->dbh;
}
Main difference I note is with remote server
a) without patch
real 0m16.357s
user 0m2.592s
sys 0m2.132s
b) with patch
real 0m0.259s
user 0m0.240s
sys 0m0.012s
I think this could be good for DBs placed on
remote servers
Bug 10611: add a "new" parameter to C4::Context->dbh
When dbh->disconnect is called and the mysql_auto_reconnect flag is set,
the dbh is not recreated: the old one is used.
Adding a new flag, we can now force the C4::Context->dbh method to
return a new dbh.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug 10611: Followup: remove useless calls to dbh->disconnect
These 3 calls to disconnect are done at the end of the script, they are
useless.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The report also known as "Overdues with fines"
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass, this adds data to the Patron column on the
overdues with fines report to show the patron's cardnumber
and phone number.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works as described and passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
While reviewing the main patch for this bug to verify that the
holds queue routines and C4::Reserves had the same conception of
when a damaged item could fill a hold request, I noticed that
GetItemsAvailableToFillHoldRequestsForBib() duplicated the code
for adding an SQL clause to filter out damaged items. This patch
removes the duplication and improves the POD for that routine.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
AllowHoldsOnDamagedItems will stop item-specific holds from being placed
on damaged items, but does not stop Koha from using damaged items to
fill holds. This seems like incorrect behavior.
Test Plan:
1) Set 'AllowHoldsOnDamagedItems' to "Don't Allow"
2) Pick an item, set it to damaged
3) Place a bib-level hold on this item's record
4) Scan the item though the returns system
5) Koha will ask to use this item to fill the hold, click "ignore"
6) Apply this patch
7) Repeat step 4
8) Koha will not ask to use this item to fill the hold
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The priority of new hold requests was not calculated when using ILS-DI.
A new routine is added, C4::Reserves::CalculatePriority(), to calculate
the priority prior to placing a request.
A separate bug report, 11640, covers the changes in reserves to
use this new routine more generally.
This patch does therefore only affect ILS-DI.
Note: ILS-DI already allows you to generate multiple holds on a biblio or
item for the same patron. This patch does not change that behavior.
Test plan:
[1] Place multiple holds using ILS-DI HoldTitle service:
/cgi-bin/koha/ilsdi.pl?service=HoldTitle&patron_id=BORROWERNUMBER&bib_id=BIBLIONUMBER&request_location=test
Check the priority.
[2] Do the same using HoldItem service:
/cgi-bin/koha/ilsdi.pl?service=HoldItem&patron_id=BORROWERNUMBER&bib_id=BIBLIONUMBER&item_id=ITEMNUMBER
Check the priority again.
[3] Use a biblio with multiple items. Place item level holds on both.
Check in one of these items in another branch. Confirm transfer.
Check in the other item in the original branch. Confirm hold.
Now you have a waiting and a transit hold.
Test HoldTitle and HoldItem service again a few times.
[4] Enable AllowHoldDateInFuture and add a future hold.
Now test HoldTitle and HoldItem again and check if these holds are
inserted before the future hold (lower priority).
January 29, 2014: Rebased this patch and amended it to make a distinction
between fixing the ILS-DI bug and using the new routine.
Updated commit message and test plan (marcelr).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
C4::Acquisition need more UT, and more robust ones. This patch
adds some.
This patch adds UT to
- GetOrder
- GetOrders
- GetCancelledOrders
- GetLateOrders
It refactors UT for SearchOrders
New UT use 2 new routines, used for check the list of fields returned
by a routine:
_check_fields_of_order
_check_fields_of_orders
These 2 routines could later be used by other UT
_check_fields_of_order has its own UT (tests n°14,15,16).
to test :
prove -v t/db_dependent/Acquisition.t
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Unit tests pass, passes koha-qa.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa and t
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This corrects line 1250 of C4/Context.pm to be:
return ($userenv->{flags}//0) % 2;
And thus avoids an uninitialized value used in the modulus.
TEST PLAN
---------
1) Apply the first patch (to update t/Context.t)
2) prove -v t/Context.t
-- This should fail tests 7 and 8
3) Apply this patch (to fix C4/Context.pm)
4) prove -v t/Context.t
-- All tests should succeed
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch addresses a number of issues with the main patch:
- regression on bug 2060 (i.e., displaying authority import batches
correctly)
- regression on bug 10170 (translation of import record states)A
- use of datatables.inc
- lack of clarity as to the licensing of tools/batch_records_ajax.pl
- insufficent sanitizing of input used to generate an SQL statement
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some libraries would like to sort by columns for the records of an
import batch. This seems like a good use of Ajax DataTables.
Test plan:
1) Apply this patch
2) Import a record batch into Koha
a) Use some form of matching
b) Have some records that will match and some that won't
c) Have at least 30 records so you can test the pager
3) Verify the new table is functionally equivalent to the old static one
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tests fine and looks good with the exception of the corrections I put in
a follow-up.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes Koha <-> Zebra use MARCXML for the serialization when
using DOM, and USMARC for GRS-1.
* The following functions are modified to set the Zebra record syntax
according to the current sysprefs and configuration:
- C4::Context->Zconn
- C4::Context-_new_Zconn
* A new function 'new_record_from_zebra' is introduced, which checks the
context we are in, and creates the MARC::Record object using the right
constructor.
The following packages get touched to make use of the new function:
- C4::Search
- C4::AuthoritiesMarc
and the same happens to the UI scripts that make use of them (both in
the OPAC and STAFF interfaces).
* Calls to the unsafe ZOOM::Record->render()[1] method are removed.
Due to this last change the code for building facets was rewritten. And
for performance on the facets creation I pushed higher version
dependencies for MARC::File::XML and MARC::Record (we rely on
MARC::Field->as_string).
* Calls to MARC::Record->new_from_xml and MARC::Record->new_from_usmarc
are wrapped with eval for catching problems [2].
* As of bug 3087, UNIMARC uses the 'unimarc' record syntax. this case is
correctly handled.
* As of bug 7818 misc/migration_tools/rebuild_zebra.pl behaves like:
- bib_index_mode (defaults to 'grs1' if not specified)
- auth_index_mode (defaults to 'dom')
here we do exactly the same.
To test:
- prove t/db_dependent/Search.t should pass.
- Searching should remain functional.
- Indexing and searching for a big record should work (that's what the
unit tests do).
- Test an index scan search (on the staff interface):
Search > More options > Check "Scan indexes".
- Enable 'itemBarcodeFallbackSearch' and try to circulate any word, it
shouldn't break.
- Searching for a biblio in a new subscription shouldn't break.
- Running bulkmarcimport.pl shouldn't break.
- And so on... for the rest of the .pl files.
[1] http://search.cpan.org/~mirk/Net-Z3950-ZOOM/lib/ZOOM.pod#render()
[2] a record that cannot be parsed by MARC::Record is simply skipped (bug 10684)
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10649 introduced a new include file for adding DataTables-related
JavaScript assets. This patch adds use of this include file to the Koha
news page.
To test you should have existing news items with varying creation and
expiration dates. Apply the patch and confirm that table sorting works
correctly for all settings of the dateformat system preference.
C4::NewsChannels.pm has been modified so that it now passes an
unformatted date to the template, where the KohaDates plugin is used to
apply the correct formatting. Sorting is based on the unformatted date.
Also corrected: Capitalization errors.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Also passes tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This is just some code cleanup, no behavior change expected.
Also replacing errstr with err in testing the results. (See DBI.)
Test plan:
Modify an item and save it.
Followed test plan. No problems found.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This routine is no longer used.
Test plan:
Do a grep on the name.
(Bonus points:) Verify if you can perform some actions on lists.
No more occurences of _biblionumber_sth found
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently road types are stored in a specific table in DB. Moreover, an
admin page is present in order to manage them.
This patch proposes to remove this table and this page in favour of a
new authorised value category 'ROADTYPE'.
This patch:
- adds a new AV category 'ROADTYPE' (created from the roadtype table
content).
- remove the roadtype table.
- remove the .pl and .tt file admin/roadtype
- remove the 2 routines C4::Members::GetRoadTypes and
C4::Members::GetRoadTypeDetails
Test plan:
1/ Execute the updatedatabase entry and verify existing roadtypes are
now stored in the AV 'ROADTYPE'.
2/ Verify you can add/update a streettype for patrons.
3/ Verify on following pages the streettype is displayed in patron
information (top left):
circ/circulation.pl
members/memberentry.pl
members/moremember.pl
members/routing-lists.pl
Signed-off-by: Sophie Meynieux <sophie.meynieux@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If a search gives results with 6 facets, one of those facets won't be
displayed. This is due to a bug in the code that only considers great
than 6 facets in one area, and less than 6 in another.
Test Plan:
1) Perform a search that should give results for 6 different libraries
2) Note you only see 5 libraries in the facets with no option to expand
3) Apply this patch
4) Repeat step 1
5) Note you now have the option to expand the facets list
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
This patch should provide a regression test but I really don't know how
to write it.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Replace constructs using given and when by if/else
feature now generates compilation warnings in 5.18
and is liable to change behaviour.
This patch:
* replaces the construct with if/else
* reformats the if branching using perltidy
to remove the now redundant indent
To test:
[1] Verify that prove -v t/db_dependent/MarcModificationTemplates.t
passes.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When you run the Reserves test, you have the warnings:
Use of uninitialized value $branchcode in hash element at /usr/share/koha/testclone/C4/Letters.pm line 138.
Use of uninitialized value $branchcode in hash element at /usr/share/koha/testclone/C4/Letters.pm line 148.
This patch removes that warning.
Test plan:
Run the Reserves.t again.
Revised Test Plan
-----------------
Run the following on the command line prompt before and after
applying the patch:
perl -e "use C4::Letters; *C4::Context::userenv= sub { return {} }; my \$blah=C4::Letters::getletter('circulation','DUE', 'BRA');"
Before the patch there will be errors (as above), after there will not.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
IndependentBranches must be on.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes the following changes to UNIMARC biblio indexing :
A. Changes to UNIMARC conf files
1. add comments to biblio-koha-indexdefs.xml
2. make biblio-koha-indexdefs.xml more compact by grouping some
declarations
Ex : 200$f and 200$g => one declaration for 200$fg
3. suppress unneeded declarations (indexing of some 4XX fields and 6XX
fields not in unimarc format)
4. unindex some (sub)fields unneeded by most users (318, 207,230,210a,
215, 4XXd)
5. change the way 308 field is indexed (no visible changes)
6. replace Title-host with Host-item -- see bug 11119
7. index 208 in Material-Type -- see bug 11119
8. index 100 pos 8-9 and 9-12 in pubdate:y and pubdate:n
9. index 100 pos 8-9 in pubdate:s instead of 210$d
10. Index all subfields of note 334 and 327 in note index
11. Index 304 and 327 in title index as well as note index
327 can contain a list of titles included in a work
304 can contain the title of the original work in case of a
translation
12. Index 314 in author index as well as note index
314 can contain authors not mentionned in 200$f/g (the 4th, 5th etc.
author)
13. Index 328 note in Dissertation-information as well as note
14. Index 328$t in Title
B. Changes to ccl.properties :
1. add a new index Dissertation-information (1056)
2. fix EAN, pubdate and acqdate (they were not linked with bib1 attributes)
C. Changes to Search.pm
1. add Dissertation-information and suppress Title-host and UPC
D. Changes to QP config file queryparser.yaml
1. add Dissertation-information
2 fix EAN, pubdate and acqdate
Test plan :
If you cannot test in GRS1, test only in DOM, as GRS will be deprecated.
1. Apply the patch in a UNIMARC Koha running with DOM and ICU
2. copy src/etc/searchengine/queryparser.yaml into the main config
directory of QP
3. copy src/etc/zebradb/ccl.properties into the main config directory
of Zebra
4. copy src/etc/zebradb/marc_defs/unimarc/biblio/* into the main config
directory of Zebra
5. reindex biblios (rebuild_zebra.pl -r -b -x -v)
6. test note index : make some searches on 334$b or 327$b
7. test author index : make some searches on 314 field
8. test title index : make some searches on 304 and 327 field, make a
search on 328$t subfield
9. test dissertation-information index : make some searches on 328 field
10. In a record, put in the dates of 100 fields the values "1000" (1st
date) and "1001" (2d date) ; try to search a book written in year
1000, you should find the record ; idem for year 1001
11. make some searches and sort by date. It should work better as before,
especially if you have values like "c2009" or "impr. 2010" in 210
field
12. Regression test : make some searches on several indexes, like EAN,
etc. It should work as before
Test 10-12 with and without Queryparser activated.
Be careful: with Queryparser activated, the index names (title,
dissertation-information...) must be entered in lowercase only.
Of course, to test search and sort by dates, you need to have full
records, with dates in 100 field as well as 210 field.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adding Number-local-acquisition in C4::Search known indexes allows to
search without using "ccl=" prefix.
Also corrects in ccl.properties : inv must be an alias of
Number-local-acquisition.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This fixes a regression introduced by the patches for bug 10723.
To Test:
1) Create budget and fund under budget administration.
2) Create Vendor in acquisitons module.
3) Create basket under vendor.
4) Create order and choose budget while creating order.
5) Click on Receive shipment button.
6) Click on receive link on the right hand side you
will be able to see a staff user name in the "created by"
field.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If a patron has a record-level hold that is unavailable, any patron
information request will send back an empty CD field when this field
should have an item barcode in it [RM note: this actually isn't
universally true -- the SIP2 standard is silent as to what is supposed
to go in the CD field. Some SIP2 devices do indeed want an item
barcode, but others are known to just want a display of the title
and author of the request in question. Providing an option is the
topic of a new enhancement request, however.]
This is due to a minor error in ILS::Patron::_get_outstanding_holds
where GetItemnumbersForBiblio is assumed to return an array but in
reality returns an arrayref.
Test Plan:
1) Create a record level hold for a patron and record
2) Using SIP2, make a patron information request
3) Note the empty CD fields
4) Apply this patch, restart SIP server
5) Repeat step 2
6) Note the CD field now has a barcode
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I did not test this patch but the following code shows me it is correct:
use C4::Items;
use Data::Dumper;
my $biblionumber = 5035;
my $itemnumber = (GetItemnumbersForBiblio($biblionumber))[0];
say Dumper $itemnumber;
$itemnumber = (GetItemnumbersForBiblio($biblionumber))->[0];
say Dumper $itemnumber;
displays:
$VAR1 = [
'23168',
'23169',
'23170',
'23171',
'23172'
];
$VAR1 = '23168';
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
C4::Charset::SetMarcUnicodeFlag() fetches system preference
values, so since it invokes routines in C4::Context, it should
load the module.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
