This is the same as preevious patch, but for advanced cataloging editor
To test:
1 - Enable EnableAdvancedCatalogingEditor
2 - Create a new record in advanced edtior
3 - Hover over leader6 and 008 type
4 - Confirm notes are useful
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 9de92e07e6)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch simply adds title elements or clarifies existing title elements to indicate how default
values are chosen
To test:
1 - Create new record in default editor
2 - Open leader helper, hover over "6-Type of record" and the dropdown
3 - Confirm notes make sense
4 - Open 008 helper
5 - Hover over 'Type of Material' and dropdown
6 - Confirm notes make sense
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 9912739231)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
See comment #1.
Signed-off-by: Roch D'Amour <roch.damour@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit df3c578ae1)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
1) Apply patch
2) Go to Home -> Patrons -> Patron details (for any patron)
3) Create manual invoice for the patron
4) Pay fines -> Pay -button
5) Check that the currency values look correct
6) Pay fines -> Pay amount -button
7) Check that the currency values look correct
8) Pay fines -> Pay selected -button
9) Check that the currency values look correct
10) Change the CurrencyFormat setting
11) Repeat 2-9
Signed-off-by: Pasi Kallinen <pasi.kallinen@joensuu.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit c1784437b4)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
No longer used since
commit de2d8ba3e4
Bug 30011: Update links to jQueryUI assets, remove datepicker references, etc.
We must remove it from our codebase.
Test plan:
git grep timepicker.inc
Should not return occurrences outside of PO's
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 75bd5cfda1)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
There is an existing pattern for the 'Note:' in pref
descriptions, where it's always added on a new line.
This changes the formatting to match that pattern.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 02b0292333)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5aa603fa30)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Note: You will need a valid OverDrive subscription to test this.
This patch fixes a JavaScript error thrown on the OPAC overdrive search
results page for libraries using translation templates and who don't
have the OverDrivePasswordRequired system preference = 'Required'.
Test plan:
1. Install the en-NZ translation: https://wiki.koha-community.org/wiki/Installation_of_additional_languages_for_OPAC_and_INTRANET_staff_client
2. Enable the en-NZ language:
- In the OPACLanguages system preference -> tick 'English New Zealand
(en-NZ)' checkbox and untick 'English (en)'
3. Fill in the OverDrive system preferences:
- Make sure you set: OverDrivePasswordRequired = "Not required"
4. Perform an OPAC search
5. Click on the Overdrive results link
6. Open the browser console and notice there is a JS error, and the
OverDrive results do not load
7. Apply patch
8. Update the en_NZ translation:
9. Repeat steps 4, 5 and 6 and notice there is no JavaScript error and
the OverDrive results do display
Sponsored-by: Melbourne Athenaeum Library, Australia
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit ade61b5e0c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 7a7716b6d8)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The additional materials check when CircConfirmParts is enabled was
errantly relying upon the 'FORCE_CHECKOUT' permission. This patch
updates the template to allow confirmation as well as cancellation of
chekout.
Test plan
1. Set a staff member with circ permissions, but not FORCE_CHECKOUT
2. Turn on CircConfirmItemParts
3. Log in as staff member in step 1
4. Attempt to checkout an item with a 952$3
5. The only option given is the Continue button (with a red X) and when
clicked, the item does not get checked out.
6. Apply patch
7. Repeat step 4.
8. You should now have the option to 'Yes, check out (Y)' or
'No, don't check out (N)'
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 49ef741405)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This fixes 2 links on the page:
* The tag within the 'all tags' cloud
* The tag shown in the 'your tags' table
Test plan as before: Test with a tag like +++
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 16ec30258e)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This applies the same fix as the first patch but to the staff
interface detail page. With this fix, a tag like +++ can
be clicked and the tagged records will show.
To test:
- Tag some records in the staff interface with something like +++
- Go to the detail page of one of those recods
- Click on the tag
- Verify nothing is found
- Apply patch
- Repeat - all tagged records will show
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 6895af827a)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
TO test:
1. Turn on: TagsEnabled.
2. Log in to the OPAC and create a tag like "LGBTQ+"
3. Add that record to a list
3. Now try clicking on that tag from detail, results, and lists page.
4. If you click on the link for the "LGBTQ+" you will get a 'no results found page'.
5. Apply patch
6. Try clicking on each of the tags in detail, results, and lists. They should work now.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 997262f6fe)
In bug 28959 category was replaced in favor of public. But
unfortunately a few places were missed.
This fixes the addbybiblionumber templates.
Test plan:
Add a biblio to a list from the search results using the Add to
or Add to list button on OPAC/intranet.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 941e538122)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1. Apply this patch
2. Go to /cgi-bin/koha/acqui/acqui-home.pl
3. The columns button should be restored, make sure you can hide/show columns correctly.
4. Go to Table settings and make sure you can hide columns properly by default.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 9b3e312223)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
includes/background_jobs_update_elastic_index.inc
vs
includes/background_jobs/update_elastic_index.inc
Both exist and have been added by bug 27344.
The first one is not used.
Test plan:
git grep background_jobs_update_elastic_index.inc
must not return any occurrences (outside of POs)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit cfb293a08a)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The serials search page serials/serials-search.pl has HTML body id :
<body id="ser_serials-home" class="ser">
It is the same as serials home page.
This patch replaces with id="ser_serials-search"
Test plan :
1) Go to Serials > Advanced search
2) Look at HTML code
3) Check you see <body id="ser_serials-search" class="ser">
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit f176c0b04a)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 2538c846f4)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Barcode is trimmed of leading/trailing whitespaces in many instances
before the barcodedecode sub was called. This patch instead makes that
barcodedecode sub is going to trim it itself and removes unnecessary,
and repetitive code that was used before barcodedecode was called.
Steps to test:
1. Edit item with any barcode, add a bunch of whitespaces at the start
and at the bottom of it. Save the item. Ensure that this action ruins
the barcode and ensure that the spaces are still there by editing the
same item again.
2. Apply the patch.
3. Edit the same item again in the same fashion. Ensure that now all
whitespaces are getting trimmed and it doesn't affect the barcode in
any negative way.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e2611c919d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Modifying an existing element of additional content (News) by changing
the library causes a duplication of the entry on the Additional contents
(News) list. A subsequent attempt of deleting one of the entries results
in deleting both of them. This is due to the fact that after
the unwanted duplication all the entries share the same
additional_contents.code.
Test plan
=========
1. Create a piece of news under Tools > News.
2. After having saved it make a modification by changing the library.
It should result in two rows in the table.
3. Delete one of the lines with Delete button. Both lines will
disappear.
4. Apply the patch.
5. Repeat the steps 1 and 2. Only the one (the modified) entry should be
present in the table.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit d5fdd1217c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 46387c3845)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Change of text from "pin" to "PIN" in the 2FA setup interface.
This slight changes clarifies that "PIN" is an acronym,
and increases user comprehension
To test:
1) Log in as an Administrator
2) Enable TwoFactorAuthentication
3) Log in to a user with superlibrarian permissions.
4) On the user profile page, click the "More" dropdown button,
click "Manage Two-Factor
5) Check that "pin" is displayed in lowercase, in both instances.
6) Apply patch.
7) Refresh the page and observe that "pin" has changed to "PIN"
8) Sign off.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit ed4250e7a9)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch removes an extra point after the number of shown results.
Test plan :
- don't apply patch
- run a report that brings you more than 20 results, e.g. SELECT * FROM biblio LIMIT 50
- see extra ' .' after the number of shown results
- apply patch
- run the report again and see the point isn't displayed anymore
- check the behaviour is still correct when you change the number of rows displayed
- sign off !
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit d491b15c55)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Replace Display/Don't display (and some other pairs) by Show/Don't show in system preferences.
Test plan:
1- Go to administration > system preferences
2- View any system preference with Display/Don't display pair of options
(e.g. OPACAcquisitionDetails)
3- Apply the patch
4- Refresh the page and notice it is now a Show/Don't show pair instead
5- Loop the steps with other system preferences until satisfied
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit ed81d6bac6)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch updates the member-flags template to use the patron-title.inc
include wherever patron names are referenced.
Test plan
1) Navigate to a patron and click through to their accounts tab
2) Note how the patron name displays in the title, breadcrumb and
headings
3) Click through to make a payment
4) Note how the patron name displays in the title, breadcrumb and
headings
5) Apply the patch and reload the page
6) Confirm the patron name still appears in each location and is
consistently formatted and linked as you would expect
Note: This patch also removes a superflous hidden title form element
that was simply passed to and from the controller but not actually used
in any way.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit c3fd42b550)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch updates the member-flags template to use the patron-title.inc
include wherever patron names are referenced.
Test plan
1) Navigate to a patron and click through to edit their permissions
2) Note how the patron name displays in the title, breadcrump and
headings
3) Apply the patch and reload the page
4) Confirm the patron name still appears in each location and is
consistently formatted and linked as you would expect
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 8b460db131)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The feature is not experimental at all.
To test:
1. Search for the RESTOAuth2ClientCredentials syspref
=> FAIL: It says it is an experimental feature
2. Apply this patch and reload
3. Repeat 1
=> SUCCESS: No longer marked as experimental
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 556a910021)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch moves the not-generic virtualshelf-related exceptions to
their own file. Callers are adjusted as required.
To test:
1. Run:
$ kshell
k$ prove t/db_dependent/Virtualshelves.t
=> SUCCESS: Tests pass
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests pass
4. Check virtualshelves work as expected
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 7704f51d51)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Adds a similar check to the patron details shown when selecting
the details tab in the patron account in the staff interface.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 3f784ea613)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
It appears that in my original submission ( Bug 9021 ),
I hid the SMS provider selector unless the SMS::Send
driver was set to "Email", but only on the OPAC,
not on the staff interface!
Test Plan:
1) Set SMSSendDriver to anything except "Email"
2) Note the SMS Provider pulldown shows in the patron editor
3) Apply this patch
4) Reload the page, SMS Provider id should now be gone
5) Set SMSSendDriver to "Email"
6) Reload the page, SMS Provider should now be shown
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit febacd36e1)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Just modifying the hint provided in patrons' messaging preferences to
allow either + or 00 for international formats.
No test plan needed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 26e8642f3f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When registering a phone number for SMS alerts, the number goes through
a regex filter to make sure the number is valid. One of the formats used
in Europe is 00 AAA XXXXXXXXX (A = country indicator) and it is not
supported.
This patch adjusts the regex to either accept 00 AAA XXXXXXXXX or
+AAAXXXXXXXXX in this case. (Note : +AAA and 00AAA are mutually exclusive).
To test:
1) You need to have installed a SMSAlert plugin. Make sure the
SMSSendDriver syspref is also set up with your SMS plugin of choice.
2) Pick a patron and edit its profile.
3) In the messaging preferences fieldset, under SMS number, enter any
number with the format 00 AAA XXXXXXXXX (ie : 00111123456789).
Try to save the modification : you should have an error message.
4) Try instead a number with the format +AAAXXXXXXXXX (ie :
111123456789), that one should be accepted.
5) Save your modification then check that the number has been changed.
6) Apply patch.
7) Repeat step 3 to 5.
8) Observe the error is gone.
9) Try it once more with the format +00 AAA XXXXXXXXX (+00111123456789),
that format should not be accepted: this is intentional.
10) Sign off.
Thanks-to: Didier Gautheron <didier.gautheron@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 3dc883a1cc)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds to the configuration of the date of birth field in the
patron entry form so that the calendar widget prohibits the selection of
a date in the future.
To test, apply the patch and open a patron record for editing. Try to
select a birth date in the future using the calendar widget. You should
be limited to a selection of today or before.
Confirm that clicking the "Yesterday" and "Today" shortcuts in the
calendar widget works correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 4d16ca1069)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When creating a patron category or editing an existing one, there is no validation for the "Password expiration" field.
If letters or other characters are entered, there is no error message and if not a number whatever is entered is not saved.
To test:
1. Go to Administration > Patrons and circulation > Patron categories.
2. Add a new patron category (or edit an existing category).
3. For the "Password expiration" field, enter letters or characters such as L$%.
=> Note that you are prompted to "Please enter only digits"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 79396ae625)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This fixes a couple cases actually.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit d0c4303c5a)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch addresses the itemnumber and biblionumber attributes for
recalls having been renamed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit b73ab06b48)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 26145 added the ability to add local cover images to items.
If SeparateHoldings is set, items from other libraries are displayed in
a separate tab, and not considered as visible. We have a JS test to
assume that images not shown are not present, this only apply for the
images for the bibliographic record, as they can come from different
sources.
Test plan:
Turn on LocalCoverImages and SeparateHoldings
Create a record with different items coming from different libraries
Attach images to items and to the biblio
Notice that with this patch you can see the images from the "Other
holdings" tab
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 54734f68f2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This attribute name was changed to *item_level* but this two remaining
places kept calling it with the old name.
To test, verify things don't explode when looking at checkouts with
recalls and also in the log viewer.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit beb663836b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
It's possible to place item-level hold without selecting a pick-up
location, which causes problems: if the item is then returned,
Koha tells about a hold, but gives error 500.
At patron's hold tab you see the number of holds, but cannot see the
actual holds there. However, if you go to the title in question,
then modify the hold so that it has a pick-up location,
then the hold will work normally again.
This patch fixes already existing but not working JS error message and
ensures that hold cannot be made while pickup location is undefined.
To reproduce:
1. Go to admin page, to the libraries configurations, and disable
pickup location for one of them.
2. Pick any biblio that has items that have that same library as a
default pickup location.
3. When placing the item-level hold, notice that the pickup location
dropdown box is empty by default. Keep it empty, place the hold.
4. Go to the patron's page of the patron who you placed that hold for,
check that it doesn't show the new hold.
5. Apply patch.
6. Repeat steps 2 and 3, it shouldn't let you make the item-level hold
until you select a specific pickup location.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 505b62b4d2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
And a few minor fixes when they where causing issues for
translatability.
And rephrased a string about password reset to have it identical to
other strings with the same meaning.
Simplified via wrapping strings with <span> to split to huge
concatenated strings with a lot of %s everywhere.
== Test plan ==
This patch needs mainly proof reading. Still it's possible to do some
basic testing to demonstrate that adding a <span> in an IF doesn't
break anything.
Pick in one of the 110 modified templates a string that you know how to
display. Otherwise:
1. acquisitions => vendor => basket => add to basket =>
search "from existing record" => add order
2. Cancel the order
3. You see without issue "Bibliographic record will not be deleted"
4. administration => Patron categories
5. Try to delete a used and unused category
6. You see as expected
Category XXXX is in use. Deletion not possible!
and
Confirm deletion of category XXXX
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
Go to "Patrons with no checkouts" report, /cgi-bin/koha/reports/borrowers_out.pl
Select "Yesterday"
=> it automatically selects the previous day's date and populates the form field
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 637c580663)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Empty PatronSelfRegistrationBorrowerMandatoryField and PatronSelfRegistrationBorrowerUnwantedField
Go to opac-memberentry.pl
Notice the JS error
Uncaught TypeError: j is undefined
Apply this patch
Go to opac-memberentry.pl
=> no JS error
Fill the pref with some values
Go to opac-memberentry.pl
=> Confirm that the fields you marked as mandatory as flagged accordinly
on the UI
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit c699f05970)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
On the staff side behaviour differs for default pickup location when placing a hold or
placing an overridden hold. Additionally, the behaviour has changed betwee master and stables
We should provide a consistent default, and allow the library to specify their choice
Note this only affects staff client as there is only a single dropdown on OPAC and it is not
tied to items
To test:
1 - Apply patch
2 - Update database
3 - Find a record with items from various branches, and at least one with a different home/holding branch
4 - Ensure there is an item that requires override to hold, and AllowHoldPolicyOverride is enabled
4 - Attempt to place hold
5 - Confirm all dropdowns default to logged in library
6 - Set DefaultHoldPickupLocation to item's home branch
7 - Refresh and confirm all dropdowns match item home library except biblio level hold - still logged in library
8 - Set DefaultHoldPickupLocation to item's holding branch
9 - Refresh and confirm defaults
10 - Mark one of the items holding library as 'not a pickup location' in Admin->Libraries
11 - Refresh and confirm dropdown is now empty for that item
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit a25b4d78d0)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
borrower_data does not contain the borrowernumber, it is sent
separately.
Test plan:
1. Edit a patron record (for example: Henry Acevedo).
2. Note that the URL is http://127.0.0.1:8081/cgi-bin/koha/members/memberentry.pl?op=modify&destination=circ&borrowernumber=19
3. Change date of birth to yesterday.
4. Save.
5. Error message displayed above the Save and Cancel buttons:
The following fields are wrong. Please fix them.
- Patron's age is incorrect for their category. Ages allowed are 18-999.
6. Note that the URL is now http://127.0.0.1:8081/cgi-bin/koha/members/memberentry.pl
7. Fix date of birth (for example: change year to 2000).
8. Select Save.
=> Without this patch you get: "Patron not found. Return to search."
=> With this patch applied the patron's data is saved
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 9f1cfa0bd3)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To reproduce:
1. Go to /tools/modborrowers.pl and fill form Card number list with data and click Continue.
2. It should give "No patron card numbers or borrowernumbers given." warning.
3. Using the browser inspector tool see that post fields cardnumberlist or borrowernumberlist
is sent with empty data.
Apply the patch, and then:
1. Fill form Card number or Borrowernumber list and click Continue.
2. Get the result: table with patrons for editing or warning about not found number.
3. Using the inspector tool see that request has data from the active tab in the form.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit f0062c67d6)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The 'completed' flag was causing the wrong status to be shown, but we
can also give a more useful message to the patron.
To test:
1) Enable the UseRecalls system preference and set up your
recalls-related circulation rules.
2) Check out an item to Patron B.
3) Log into the OPAC as Patron A and search for the item.
4) Place a recall on that item.
5) Go back to the staff client and check the item in. Confirm the recall
as waiting for Patron A.
6) Go back to the OPAC record page and look at the holdings table.
Notice the status still says the item is Available.
7) Apply patch, restart services, refresh the OPAC.
8) Confirm the holdings table status now says the item has a pending
recall.
Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 8f09ef75c3)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This page does not pull the recall columns correctly.
To test:
1) Enable the UseRecalls system preference and set up your
recalls-related circulation rules.
2) Check out an item to Patron B.
3) Log into the OPAC as Patron A and search for the item.
4) Place an item-level recall on that item.
5) Go back to the staff interface and search for the item. Confirm that when you go
to the record detail page, it explodes and errors are shown.
6) Apply patch and refresh page.
7) Confirm page loads as expected.
8) Check the Status information for the item in the Holdings table.
Confirm it shows the recall information correctly.
9) Check in the item and confirm the recall as waiting for Patron A.
10) Go back to the record detail page and confirm the Status information
for the item shows as Waiting in the Holdings table.
Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 3b1ee10ee5)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1. In Acquisitions make a basket and add something "From an external source"
2. Search for a title and click on the 'MARC' button, make sure the MARC prview is both tall and wide.
3. You will not see the horizontal scroll bar unless you scroll all the way to the bottom of the preview.
4. Apply patch.
5. Try steps 1 & 2 again, this time you should see the horizontal scroll bar as soon as the MARC prveiw loads.
Note: I put the CSS on multiple lines for better readability
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 98c5ecd0d5)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch renames the route to make it consistent for future additions.
To test:
1. Run
$ git grep 'matches/chosen'
=> FAIL: all occurences use /api/v1/import/
2. Apply this patch
3. Run:
$ git grep 'matches/chosen'
=> SUCCESS: All occurences have '/api/v1/import_batches/'
4. Run:
$ kshell
k$ prove t/db_dependent/api/v1/import_record_matches.t
=> SUCCESS: Tests pass!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 891972d0d3)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
