Patch rewritten from the original one from nengard, that I couldn't apply for an unknown reason
This patch changes around the wording of the StatisticsFields
preference to make it clearer where these values will show.
Signed-off-by: Marc Veron <veron@veron.ch>
In order to prevent spamming using sendbasket.pl, some counter-measure are done:
- permit send basket only for authenticated user
- permit send basket only if basket contains items
- use username & email for 'Reply-To' field (with fallback to KohaAdminEmailAddress)
- add field X-Orig-IP with IP of sender
- add field X-Abuse-Report with KohaAdminEmailAddress
Note: we don't use forged 'To' address with patron email in order to
prevent be marked as spam (by SPF for example).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
There is a mis-scoped function call in C4::Auth, on line 154, where
GetMembers is called without explicit scoping and before
'require C4::Members;'. This does not actually have any functional
ramifications as far as I can tell, but it would be a good idea to fix
it.
This patch also corrects a bit of indenting in that area, because it was
an unnecessary challenge to understand the code with the mis-indenting.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Because updating the total issues count associated with a bibliographic
record on issue could cause a significant load on the server, this
commit adds the syspref UpdateTotalIssuesOnCirc (which defaults to OFF
to match existing behavior). The syspref has the following description:
Do/Do not update a bibliographic record's total issues count whenever
an item is issued (WARNING! This increases server load significantly;
if performance is a concern, use the update_totalissues.pl cron job
to update the total issues count).
Bug 6557: automatically increment totalissues
Adds the ability to automatically increment biblioitems.totalissues
whenever an item is issued.
To test:
1) Choose a record with at least one item that can circulate
2) Check the value of 942$0 (you may need to look at the plain MARC view
on the OPAC). Most likely there won't be any 942$0 at all
3) Enable UpdateTotalIssuesOnCirc
4) Check out the item you selected
5) Check the value of 942$0 (you may need to look at the plain MARC view
on the OPAC). That value should now be one greater than before
6) Discharge the item
7) Disable UpdateTotalIssuesOnCirc
8) Check out the item you selected again
9) Check the value of 942$0 (you may need to look at the plain MARC view
on the OPAC). That value should not have changed
Bug 6557: add script to update totalissues from stats
NAME
update_totalissues.pl
SYNOPSIS
update_totalissues.pl --use-stats
update_totalissues.pl --use-items
update_totalissues.pl --commit=1000
update_totalissues.pl --since='2012-01-01'
update_totalissues.pl --interval=30d
DESCRIPTION
This batch job populates bibliographic records' total issues count
based on historical issue statistics.
--help Prints this help
-v|--verbose
Provide verbose log information (list every bib modified).
--use-stats
Use the data in the statistics table for populating total
issues.
--use-items
Use items.issues data for populating total issues. Note that
issues data from the items table does not respect the --since
or --interval options, by definition. Also note that if both
--use-stats and --use-items are specified, the count of biblios
processed will be misleading.
-s|--since=DATE
Only process issues recorded in the statistics table since
DATE.
-i|--interval=S
Only process issues recorded in the statistics table in the
last N units of time. The interval should consist of a number
with a one-letter unit suffix. The valid suffixes are h
(hours), d (days), w (weeks), m (months), and y (years). The
default unit is days.
--incremental
Add the number of issues found in the statistics table to the
existing total issues count. Intended so that this script can
be used as a cron job to update popularity information during
low-usage periods. If neither --since or --interval are
specified, incremental mode will default to processing the
last twenty-four hours.
--commit=N
Commit the results to the database after every N records are
processed.
--test Only test the popularity population script.
WARNING
If the time on your database server does not match the time on your Koha
server you will need to take that into account, and probably use the
--since argument instead of the --interval argument for incremental
updating.
=== TESTING PLAN ===
NOTE: in order to test this script, you will need to have some sort of
circulation data already existing in your Koha installation.
1) Disable UpdateTotalIssuesOnCirc
2) Run: misc/cronjobs/update_totalissues.pl --use-items -t -v
3) If you have total checkout data in your item records (i.e. anything
in 952$l), you should see messages like "Processing bib 43 (1 issues)"
4) Choose one of the lines that shows more than 0 issues, and view the
record with that biblionumber in the staff client, choosing the "Items"
tab (moredetail.pl). Add up the "Total checkouts" listed for each item,
and confirm it matches what the script reported
5) Run: misc/cronjobs/update_totalissues.pl --use-stats -t -v
6) If you have any circulation statistics in your database (i.e. any
'issue' entries in your statistics table), you should see messages
like "Processing bib 43 (1 issues)";
7) Choose one of the lines and view the record with that biblionumber in
the staff client, choosing the "Items" tab (moredetail.pl). If you
count the number of checkouts listed in each item's checkout history,
the total should match what the script reported.
8) Check out an item
9) Run: misc/cronjobs/update_totalissues.pl --use-stats
--incremental --interval=1h -t -v
10) You should see one line reporting a single circ for the bib record
associated with the item you just checked out (there may be more if
you checked out any books in the hour prior to running these tests
11) If the results in steps 4, 7, and 10 match the predictions, the
script worked
This patch to Koha was sponsored by the Arcadia Public Library and the
Arcadia Public Library Foundation in honor of Jackie Faust-Moreno, late
director of the Arcadia Public Library.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Tested this with my test data - numbers are correct and updated appropriately.
More importantly - if I do a popularity search, the most popular items *come up first*. Amazing.
To test:
1. go into system administration and search for "cover"
2. change "OpenLibraryCovers" to "add" and all other to "don't show"
3. verify that opac search results have small covers, while
detail page has big ones
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Addressing M. de Rooy's concerns
* remove console.log
* removed some comments that looked like debug code?
* remove ebook display - I couldn't get it to work properly, and we want the bigger images. So it's gone.
* remove get_cover
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
June 27, 2012: Removing unused function keys from openlibrary.js.
This preference had a few grammar errors and repeated the
word 'show.' This patch resolves those issues.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The patron statistics tab had had headings that were too
hard to understand for the average library user. This patch
changes the language to something less technical.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adds the ability to attach unlimited arbitrary files to
a borrower record.
Test Plan:
1) Enable system preference EnableBorrowerFiles
2) Look up borrower record, click 'Files' tab on left
3) Upload a file, download the file, delete the file.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
rebased for current master.
Signed-off-by: Ian Walls <koha.sekjal@gmail.com>
rebased again; some indentation issues in include menus.
A logic bug in the original code adding DefaultClassificationSource
caused the default not to be used (the last used value was used instead)
The bug was fixed in additem by bug 2398 but addbiblio's use
of the code was not fixed.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Rather than list authorities that are not actually used by a library,
this commit introduces a new syspref: OPACShowUnusedAuthorities to
enable libraries to hide unused authorities in the OPAC authority browser.
To test:
1) Do a search in the OPAC authority browser that brings up multiple
results, including some that are used in the bibliographic database
and some that are not.
2) Observe that the results include both used and unused authorities.
3) Set OPACShowUnusedAuthorities to "Do not."
4) Repeat the same search as in step 1.
5) Observe that the results no longer include unused authorities.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Preference is implemented cleanly and works like advertised.
As a note: The unused authority records will be hidden from display,
but the result list paging does not adjust for the hidden records.
So the result pages will show more or less records total, depending
on how many records are hidden.
Adds more precise debug informations for easier CAS troubleshootings resolution.
Before this patch, whenever ticket validation failed, the debug message was "Invalid ticket".
But ticket validation may fail for other reasons: CAS server not reachable, casServerUrl syspref is wrong...
This patch adds the reason for ticket validation failing.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
showmarc.tt and opac-showmarc.tt are used to load a plain view
of a MARC record and thus do not need the full set of page assets
loaded with other pages (CSS and JavaScript). Removing the
standard doc-head-close include will reduce the load time of
these pages.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch adds the TT filter to other places where we are displaying the
subscription notes:
- OPAC detail page, subscription tab
- OPAC subscription brief history page
- Staff detail page, subscription tab
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch works and makes use of TT filters!
I agree the display could be improved to work a bit nicer
for long lines or multi-line comments, but this is still a nice
improvement.
All instances of the old DynArch calendar have been replaced with
jQueryUI versions and the old library files have been removed.
calendar.inc has been modified to include jQueryUI localization
strings and global configuration options. Just add a "datepicker"
class to an input field to trigger a datepicker prompt.
If you would like two fields in one from to limit each other (one
is date from, one is date to), add these classes to each:
"datepickerfrom" and "datepickerto." This will prevent an invalid
entry, e.g. a date in the latter which falls before the former.
jQueryUI is now upgraded to the latest verision, 1.8.21.
Edit: Now with proper translatability, date formatting, first day
of the week handling, and RTL support.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Ian Walls <koha.sekjal@gmail.com>
QA Comment: rebased on current master; minor merge conflicts with other patches pushed
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
From july 2012, unimarc norm evolves and the value k "monograph with both publication date and print date" must be added for this position.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Checked the new value shows up and is correctly copied into the field.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
At the moment, local cover images cannot be cached by the web browser
or any intermediate reverse proxies. This results in an unnecessary
load on the server, and is entirely unnecessary.
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Fixes few tabs within date; adds a regex to fix mistakes with spaces.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch avoid enqueuing messages that have an empty body. It can
happen when letter is empty or becomes empty after being processed by
parseletter
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Markup errors were causing display problems when the "manual history"
section is shown.
To test, apply the patch, load the subscription add page, and check
the "manual history" checkbox. The "Serials planning" section
should appear directly below the "manual history" section.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The biblio/items detail pages (staff and OPAC) display
the copynumber description if an authorized value
is configured accordingly.
Signed-off-by: Gaetan Boisson <gaetan.boisson@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I can confirm the bugs on current master and this patch fixes both problems.
- Pull down list for "Planning" on the budget page was not showing
categories of authorized values
- Planning page showed the categories, but budget_period_id was
missing from the URL
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Removes an accidently added "curr" from below the search options
for administration > Z39.50 client targets.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
- Removing unused references to YUI assets in authorities/auth_finder.tt
- Removing unneeded call to autocomplete JS in help-top.inc and
adding new jQuery dependencies.
- Minor HTML markup corrections to auth-finder-search.inc discovered
in debugging the patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested:
- help files on various pages
- auth finder plugin in cataloguing
- authority search in authorities module
Last modules were not displayed if the number of modules did not match the number of rows of the table (when $number_of_modules % 4 != 0)
Signed-off-by: Marc Veron <veron@veron.ch>
Added some code to about.tt to have empty the last remaining cells, not sure if an other signoff is needed.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The updatedatabase22to30.pl script update the engine from MyISAM to InnoDB for most tables.
However, the TYPE=InnoDB was deprecated, and is not removed.
The correct syntax is now ENGINE=InnoDB
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Adding TT date filter to output of expiration date
on OPAC user page.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Delaye Stephane <stephane.delaye@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Patrons get incorrectly debarred because of the use of Datetime->delta_days
wich happens to always return a positive number.
Also changed the use of Datetime->truncate function so it follows the docs,
using 'day' instead of 'days' (which is used in DateTime::Duration).
This patch has been tested against master.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Comparation of date and datetime is always false
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Exported file contains the list of checked in items.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
