Makefile.PL: Section for creating file t/test-config.txt removed.
Removes t/Makefile and t/rewrite-config-test too.
Modifies XISBN.t to remove two commented lines.
Test plan:
Grep for KohaTest, database_dependent, config-test, t/Makefile.
Run perl Makefile.PL and include running the test suite.
This may fail on t/00-valid-xml.t and t/QueryParser.t, but that is not the
result of this patch. Same for t/00-load.t with potential error on
Koha::Plugins::Base.
I had this result:
Test Summary Report:
t/00-valid-xml.t (Wstat: 1792 Tests: 381 Failed: 7)
Failed tests: 10, 30-31, 169, 181, 201-202
Non-zero exit status: 7
t/QueryParser.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
Files=92, Tests=12385, 45 wallclock secs ( 1.74 usr 0.15 sys + 26.61 cusr 1.92 csys = 30.42 CPU)
Result: FAIL
Failed 2/92 test programs. 7/12385 subtests failed.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
All tests pass, and I find no mention of the removed test code.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes Makefile.PL put the history.txt file in the right places
depending on the chosen setup layout, adds a reference to that place in
koha-conf.xml (and debian template version), and finally tweaks about.pl to
use it.
To test, apply the patch and verify that perl Makefile.PL runs fine, and
installing in
- dev
- single
- standard
layouts works as expected. Then go to the about.pl page and see if Koha's
history shows there.
Then, build your packages and test on your newly created instances.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch add the option to choose 'ru' and 'uk' during install for Zebra.
Should work for a tarball install, and make 'ru' and 'uk' available for using
with koha-create too.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Reran Makefile.pl and made sure the language options show up now.
Patch extends existing language code lists addings nb, ru and uk
where missing.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch provides a definition file for Spanish (es) character
sorting in Zebra. It is based on the ideas from Hugo Agud <hagud@orex.es>
and Pablo Bianchi <pablo.bianchi@gmail.com>.
Makefile.PL is fixed to notice the existence of the 'es' language. The
docs for koha-create are touched too.
To test:
Tarball
=======
- Go through the install process, choosing 'es' for the Zebra's language step
- Koha should work as usual.
- Running this should show the lang definition is properly set.
$ grep -R "lang_defs/es" /etc/koha/*
(stuff like zebradb/zebra-biblios-dom.cfg:profilePath:...etc/koha/zebra/lang_defs/es... should show)
- This file should be present:
/etc/koha/zebradb/lang_defs/es/sort-string-utf.chr
Packages
========
- Build your own package, it shouldn't break the packaging
- Try the new package, using koha-create to set an instance using --lang 'es'
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
Create the plugins directory in the Makefile
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
One line change, all ok.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds support for custom plugins. At the moment the Plugins
feature supports two types of plugins, reports and tools.
Plugins are installed by uploading KPZ ( Koha Plugin Zip )
packages. A KPZ file is just a zip file containing the
perl files, template files, and any other files neccessary
to make the plugin work.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Create the directory /var/lib/koha/plugins
4) Add the lines
<pluginsdir>/var/lib/koha/plugins</pluginsdir>
<enable_plugins>1</enable_plugins>"
to your koha-conf.xml file
5) Add the line
Alias /plugin/ "/var/lib/koha/plugins/"
to your koha-httpd.conf file
6) Restart your webserver
7) Access the plugins system from the "More" pulldown
8) Upload the example plugin file provided here
9) Try it out!
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
See the bug for a description of the problem.
This patch tries to restore searching for marcflavour != MARC21 as well as
allowing instances with different marcflavors to co-exist on the same server.
To test:
- Do a package install with e.g. the official squeeze-dev packages and create at
least two instances, with different marcflavours, e.g.:
sudo koha-create --create-db --marcflavor marc21 test1
sudo koha-create --create-db --marcflavor normarc test2
- Run through the web installers for both instances and add a couple of
records to each. Wait for the records to be indexed or run indexing manually
with
sudo koha-rebuild-zebra -f test1
sudo koha-rebuild-zebra -f test2
- Try searching for the records you added. It should work in test1 but not in
test2.
- Apply the patch and build packages with the build-git-snapshot script
- Install the new koha-common package
- Create two instances (because of Bug 9754 it is probably best to give the
instances different names than the ones you created above, or to do this on
a fresh VM or similar) and add records, as described above. Searching should
now work equally well for both instances.
Please note: Because of Bug 9752 you will have to set marcflavour = NORMARC
by hand before you do the searching, if you choose NORMARC as the marc flavour
on one of the instances you create.
Please note too: I am not confident that this is the perfect solution, so
merciless and thorough testing is necessary! ;-)
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Works for me for GRS-1 (package installation out of the box). Could not figure out how to set up DOM indexing and eventually stopped caring about it.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Build packages with the patch and checked that creating
instances and search within them works for both MARC21 and NORMARC.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When installing from the tarball, the OpenILS/QueryParser.pm file seems
to be missed because it is not included in Makefile.PL... sometimes.
To test:
1) Run Makefile.PL and make.
2) Look in blib/PERL_MODULE_DIR/ and check if the OpenILS directory is
there.
3) Apply patch.
4) Rerun Makefile.PL and make.
5) Confirm that OpenILS directory is now in blib/PERL_MODULE_DIR/
regardless of whether or not it was there during step (2).
6) Sign off.
Note: Confirmed that OpenILS directory is correctly installed in the lib dir,
in 'standard' install mode, and also 'single'.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Simple fix for a big problem.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
[This patch was split out from tcohen's excellent patches for bug 8519
--jcamins 2012/10/31]
Added a new koha-index-daemon-ctl.sh script that uses the
'koha-index-daemon' provided by Koha::Contrib::Tamil (install via CPAN)
to process the indexing queue ('zebraqueue' for now, 'indexqueue' in the
future I guess :-P).
This script could be easily modified in the future for using another
index queue processing script (a more abstract indexing script for both Solr
and Zebra, etc). I removed all zebra-ish stuff from it.
Documentation patches will be provided as followups, once Mark Tompsett's
docs are pushed to avoid continous rebasing.
Tested to work on an up-to-date Ubuntu 12.04.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
[This patch was split out from tcohen's excellent patches for bug 8519
--jcamins]
It removes the obsolete zebraqueue_daemon.pl and koha-zebraqueue-ctl.sh
obsolete scripts too.
Several files are modified to address te removal/addition of these files.
I didn't run the install procedure as I was working on my laptop with a dev
setup, just set the symlinks. Now fixed things as proposed by wajasu
on comment #4. Any other suggestion please let me know.
Tested to work on an up-to-date Ubuntu 12.04.
Asked by wajasu, remove remaining obsolete zebraqueue stuff.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Modify Makefile.PL and Zebra configuration files in order to parametrized
biblio record type returned by Zebra Z39.50 server.
How to test:
- Test with a MARC21 and a UNIMARC DB
- Do a new installation
- Search from OPAC
- Search from a Z39.50 client like yaz-client: syntax = MARC21/UNIMARC must be
choosed
- It was working for MARC21: it continues to work
- It wasn't working for UNIMARC: it works now, both in OPAC and from a Z39.50
client
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Works fine for MARC21. Frederic looked at UNIMARC. Magnus looked at NORMARC.
GRS1 works okay for me. I still have issues with DOM, but they are not directly related to changes in this patch.
A followup is still needed for packaging (debian/templates).
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Changed hardcoded path for a programmatic one. Basing it on:
grep /\/usr\/share\/perl\//, @INC;
And doing a:
push @version, ('/usr/share/perl/5.10') if !$version[0];
For a reasonable default otherwise. No more references to
/usr/share/perl/5.8
hardcoded into the output.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch builds on work by Lars Wirzenius for the Koha packages.
To date, the only way for a Koha librarian to obtain a complete backup
of their system has been to log into the system via SSH (or FTP) to
download the mysqldump file. This patch makes it possible for
superlibrarians in properly configured systems to download night backups
via the staff client's Export tool.
Recognizing that this is functionality with potentially very grave
security implications, system administrators must manually enable these
features in the koha-conf.xml configuration file.
The following configuration settings have been added to the koha-conf.xml
file:
* backupdir => directory where backups should be stored.
* backup_db_via_tools => whether to allow superlibrarians to download
database backups via the Export tool. The default is disabled, and
there is no way -- by design -- to enable this option without manually
editing koha-conf.xml.
* backup_conf_via_tools => whether to allow superlibrarians to download
configuration backups via the Export tool (this may be applicable to
packages only). The default is disabled, and there is no way -- by
design -- to enable this option without manually editing koha-conf.xml.
This commit modifies the following scripts to make use of the new
backupdir configuration option:
* koha-dump and koha-run-backups in the Debian packages
* The sample backup script misc/cronjobs/backup.sh
Note that for security reasons, superlibrarians will not be allowed
to download files that are not owned by the web server's effective user.
This imposes a de facto dependency on ITK (for Apache) or running the
web server as the Koha user (as is done with Plack).
To test:
1. Apply patch.
2. Go to export page as a superlibrarian. Notice that no additional
export options appear because they have not been enabled.
3. Add <backupdir>$KOHADEV/var/spool</backup> to the <config> section
of your koha-conf.xml (note that you will need to adjust that so that
it is pointing at a logical directory).
4. Create the aforementioned directory.
5. Go to export page as a superlibrarian. Notice that no additional
export options appear because they have not been enabled.
6. Add <backup_db_via_tools>1</backup_db_via_tools> to the <config>
section of your koha-conf.xml
7. Go to the export page as a superlibrarian. Notice the new tab.
8. Go to the export page as a non-superlibrarian. Notice there is no
new tab.
9. Run: mysqldump -u koha -p koha | gzip > $BACKUPDIR/backup.sql.gz
(substituting appropriate user, password, and database name)
10. Go to the export page as a superlibrarian, and look at the "Export
database" tab. If you are running the web server as your Koha user,
and ran the above command as your Koha user, you should now see the
file listed as an option for download.
11. If you *did* see the file listed, change the ownership to something
else: sudo chown root:root $BACKUPDIR/backup.sql.gz
11a. Confirm that you no longer see the file listed when you look at the
"Export database" tab.
12. Change the ownership on the file to your web server (or Koha) user:
sudo chown www-data:www-data backup.sql.gz
13. Go to the export page as a superlibrarian, and look at the "Export
database" tab. You should now see backup.sql.gz listed.
14. Choose to download backup.sql.gz
15. Confirm that the downloaded file is what you were expecting.
If you are interested, you can repeat the above steps but replace
<backup_db_via_tools> with <backup_conf_via_tools>, and instead of
creating an sql file, create a tar file.
To test packaging: run koha-dump, confirm that it still creates a
usable backup.
------
This signoff contains two changes:
10-1. If no backup/conf files were present, then the message telling you
so doesn't appear and the download button does. Made them behave
correctly.
10-2. The test for a file existing required it to be owned by the
webserver UID. This change makes it so it only has to be readable.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Adds the necessary bits to enable DOM indexing for bib
records as an option during installation from source.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Word search with multi-part facets works properly only with Zebra ICU
tokenization. This patch add a new question to Koha command line
installer:
Zebra has two methods to perform records tokenization
and characters normalization: CHR and ICU. ICU is
recommended for catalogs containing non-Latin
characters. (chr, icu) [chr]
How to test:
- perl ./Makefile.PL
- Try each possible value for new parameter
- Take a look at zebradb/etc/default.idx file.
Depending of the parameter you get this line:
icuchain words-icu.xml
or this one:
charmap word-phrase-utf.chr
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
(Note: This patch was previously associated with bug 3216; I moved it to a
separate bug because including ICU is a good idea independent of the fix for
the particular issue described in bug 3216)
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The Koha namespace is for Perl modules that meet the following mandatory
conditions:
* use "strict" and "warning" pragmata
* include valid POD
* include complete and functioning documented test cases
* not create circular dependencies
* use Object Oriented (OO) style everywhere possible
* minimize exports
* maintain mod_perl, etc. compatibility
* separate data access methods from business logic
Modules in C4 can use (and are encouraged to use) routines in
the Koha namespace. Modules in Koha should not in general use C4
modules; any C4 module that is safe to be depended on by a Koha
module is a candidate for being renamed to Koha.
The advantage of carving out a new namespace is that it doesn't
require that we refactor the entirety of C4 to support persistance or
to untangle the dependency tree. Instead, the only C4 code we would
have to reimplement for the Koha namespace right away would be
authentication, basic session management, and basic output.
(Gratuitous use made of gmcharlt's recommendations found in the
post mentioned below.)
Related info:
http://lists.koha-community.org/pipermail/koha-devel/2011-March/035302.htmlhttp://wiki.koha-community.org/wiki/Namespace_QA_Rules
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
- XSLT for the OPAC
- Value_builders for lesder, 007 and 008
- Default NORMARC framework
- Reverse MARC logic of some subs, so MARC21 is default (and works for NORMARC)
- Add NORMARC as an option to the syspref marcflavour
- Add record.abs for NORMARC
- Add NORMARC and nb as options to Makefile.PL
- Add etc/zebradb/lang_defs/nb/sort-string-utf.chr
- Copy MARC21slim2OAIDC.xsl to NORMARCslim2OAIDC.xsl
Some things are still missing, e.g.:
- XSLT for Intranet
- More MARC21slim2*.xsl transformations
working through the master branch to eliminate all
podchecker warnings/errors
Actual improvement to the quality of the POD will
come later (hopefully with assistance of others)
Signed-off-by: Andrew Elwell <Andrew.Elwell@gmail.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The Debian squeeze system has only 2.20, and the 2.21 does not
seem to be required for all tests to pass. Also, checked with
Galen Charlton and Henri-Damien LAURENT (who added the 2.21
dependency) on IRC that 2.21 did not have anything that was
required, compared to 2.20.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Missed the lines where dollar signs are quoted for DB_PASS and ZEBRA_PASS.
Don't need to quote (double-quote) those two lines now.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Make treats any $ as an internal variable except $$. So have Makefile.PL when
getting values turn any $ into $$.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
In one of my setups, "install-code.pl pt-PT" complained
about a missing "Locale::PO". So, I'm adding it to
Makefile.PL. I'm using the version 0.17 as minimum
required because it's the one that's available in
Debian 5.0.2. ("lenny").
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This patch adds a dependency requirement for Locale::Currency::Format
NOTE: It does not adjust kohaversion.pl and sets the dev version to XXX.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
[RM note: DOM is recommended for MARC21 authorities. As of
now, GRS-1 is the only mode supported for UNIMARC authorities.]
dom is the recommended authorities indexing mode in external docs
making it default accepts what appears to be the de facto preference
see Indexdata's documentation for more details on the options
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
A tweak to restore MSWin32 installation capability.
NOTE: Native MSWin32 support in Koha is for Strawberry Perl 5.10.1.0 or later.
There are some issues with GDBM_File.pm which prevent Koha from running without a bit of
a workaround. This will be resolved in the January 2010 release of Strawberry Perl. More
can be read concerning this in the INSTALL.MSWin32 file which will be forth-coming.
NOTE: There will be several other minor changes to other portions of the Koha code base
in order to fix misc issues when Koha is installed on MSWin32.
for exemple: when you use
install_misc/environment_Makefile.PL DESTDIR=$HOME by default but koha
is installed in $HOME/koha-dev that is not expected!
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Enables ppl to store their search history and delete the whole history
Adding Storable required by Opac-Search-History
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Now requiring at least 0.80, the oldest version available
from CPAN, because use_ok tests were not being properly
accounted for in the test plan before 0.73. This led
to a situation where a test script containing a use_ok test
that passes running under an earlier version of Test::More
would fail under a more recent one.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
After 2009-08-15, Amazon Web Services will expect that
all requests to the Product Advertising API, which is what
Koha uses for retrieving reviews and other enhanced content
from Amazon, include signatures. This patch and
subsequenct patches implement this functionality.
What this means in practice (assuming the user has elected
to use any enhanced content from Amazon) is that
[1] The user must get a Amazon Secret Access Key. This can
be done by logging in to the user's AWS account
at (e.g.) http://aws.amazon.com/, going to the 'Access Identifiers'
page, and from there retrieving and/or creating a new Secret
Access Key.
[2] The contents of the Secret Access Key should then be
entered into the new AWSPrivateKey system preference.
Once that is done, grabbing reviews and table of contents from Amazon
should work as normal. If the user doesn't do this before 2009-08-15,
reviews and TOCs will no longer be supplied from Amazon, although there
should be no crashes - the content will simply not show up.
Note that the requirement to sign requests does *NOT* appear to apply
to simply displaying book covers from Amazon.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This enhances the web installer so that messages from updatedatabase.pl will
be displayed to the user running a database update. Messages printed to STDOUT
will be displayed as the update report, while messages printed to STDERR will
be displayed as update errors.
This patch introduces a new module dependency, IPC::Cmd.
IPC::Cmd lets one run an external program such as updatedatabase.pl and easily
capture STDERR and STDOUT for further munging. IPC::Cmd is core in Perl 5.10
and stable in Perl 5.8.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
The Offline Circ tool by Kyle Hall uses PHP's SQLite, which is SQLite
v2. Gnope, which Kyle links, ships with libSQLite v2.
Let's not count on libsqlite3 not being installed for perl. If it is
installed DBD::SQLite will use it, where DBD::SQLite2 will not.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Add the ofline_circ directory to Makefile.PL as needing to be installed.
Add calls to barcodedecode() on issueing and returning.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
As rss.pl is not a CGI script, moved it to join the
other cronjobs. Full documentation of the script
is in misc/cronjobs/rss/rss.pl, but to summarize:
[1] rss.pl is run on the command line to produce
an RSS XML document. The output should be
placed in a directory accessible to the OPAC
(or staff) web interface so that users can download
the RSS feed. An example of usage:
misc/cronjobs/rss.pl lastAcquired.conf
Normally rss.pl should be run periodically (e.g., daily)
to keep the feed up-to-date.
[2] The configuration file (e.g., lastAcquired.conf) lists
* name of the template file to use
* path of output file
* SQL query
rss.pl runs the SQL query, then feeds the output of the
query through the template to produce the output file.
[3] The template file (e.g., lastAcquired.tmpl) uses
HTML::Template syntax like any of the HTML
templates for the web interface.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Recently, there were changes to the Makefile.PL to make it install in a
DESTDIR that the OS (debian) may choose. This broke the test suite.
Since we're not installing the stuff in the t/ directory, we need to
ignore the DESTDIR specifiation before we write the test-config.txt.
So, this patch adds a call to the _strip_destdir function for all
directories written to the t/test-config.txt file.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This is the script that generates the patron and holdings database for the offline circ module. I
touched up a few parts of it:
* fixed the database syntax to squash a bug or two
* extracted some methods for readability and reuse
* added some documentation
* added a --file and --force command line argument
* made it die if DBD::SQLite is not present. That module is required for this feature.
Here's an example crontab line that will generate the borrowers.db file each midnight.
0 0 * * * create_koc_db.pl --file /tmp/borrowers.db
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This patch removes Image::Magick as a dependency and replaces it with
the (much) lighter GD. Functionality of patronimage code has not changed with
this conversion.
Adding errorhandling for corrupted image file and link to return to moremember.pl when called from there
Added notes about supported image mime types.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
There has been a report of difficulties installing MIME::Lite 3.01. Only 3.0 is really necessary, so I'm relaxing the requirements.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
formerly, the overdues cronjobs were crafting their own MIME message attachments (poorly). This
patch adds a dependency on MIME::Lite, the de facto standard perl module for forming usable
emails with MIME attachments. MIME::Lite is pure perl and well supported on numerous platforms:
http://testers.cpan.org/show/MIME-Lite.html
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
SMS::Send is used by the new enhanced messaging stuff. It's a pure-perl module that
provides a consistent interface to SMS sending gateways. There are alredy
a handful of driver modules for gateways on CPAN, and adding one for a new gateway
is possible.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
This patch requires that the test database name be different from the production database name.
The object here is to prevent people from specifying the same database for both, and then
losing all of their data in the production database.
This may cause problems for people who want to do that, though I consider that bad practice.
It may also cause problems for people if they have two different servers, each with identically
named database, and they want to use one for testing and the other for production. If we ever
find that someone like that exists, we can deal with that case.
I don't think there are any necessary documentation changes here yet since we're recommending
that users answer "no" to the question about setting up a test database.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
If running Zebra, try to locate zebrasrv and zebraidx
so that koha-zebra-ctl.sh can point to a functioning
zebrasrv.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
I'm adding some more warnings in Makefile.PL to indicate that you WILL lose the data
in your testing database.
I've also relaxed the requirement that the teting database have "test" in its name.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
The daemon control scripts (koha-zebra-ctl.sh, koha-zebraqueue-ctl.sh,
and koha-pazpar2-ctl.sh) are now copied and installed in a
runnable fashion for a 'dev'-mode install. By default
they are installed in the bin subdirectory of the runtime
directory.
Also:
* the control scripts now work if the EUID is other
than root (as would be expected for a 'dev' or 'single'
install).
* Split the SCRIPT_DIR installation target into
SCRIPT_DIR (scripts to copy regardless of install mode)
and SCRIPT_NONDEV_DIR (scripts to copy to SCRIPT_DIR
unless the install mode is 'dev').
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
* All configuration and run-time files created during
a test suite run now live under t/run
* made sure scripts copied to t/run/bin are executable
* added t/run and t/test-config.txt to .gitignore
Signed-off-by: Andrew Moore <andrew.moore@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
I'm adding a bunch of additions to the test suite. There is now a test
database that is created, and a test instance of the zebra server and
daemon that are run before the tests in t/database-dependent.pl are
run. This means that you can test things that insert (or destroy)
things in the database.
To use these tests, after you 'make' your koha installation, you can
change to the 't' directory and 'make test' there.
There is now an additional question asked during installation. It asks
whether you would like to run the data-dependent tests. If so, It asks
you for some login information to a test database. I recommend that
you do not not use your production database here. It will delete all
of the data in it.
Things that need improvement:
* I suspect that there are large parts that are not very platform
independent, so they will need to be improved.
* There are some parts of the installer that will probably be
refactored to let this work a little bit better, including being run
directly from a main-level 'make' target at some point.
* Lots more tests to add. Be bold! (see the t/lib directory)
* other tests in t/*.t can possibly benefit from being included in here.
There are two required perl modules for this part of the test suite. I
use:
'Test::Class' => 0.028,
'Test::Class::Load' => 0.02,
They are not listed as requirements in the top-level Makefile.PL
because they're not actually required to install or use Koha, but if
you want to run the test suite, you can install them from CPAN.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
INTRANET_TMPL_DIR
INTRANET_WWW_DIR
OPAC_TMPL_DIR
OPAC_WWW_DIR
KOHA_CONF_DIR
OPAC_TMPL_DIR
OPAC_WWW_DIR
PAZPAR2_CONF_DIR
ZEBRA_CONF_DIR
For each directory on the list, if an existing file
installed file is different from the version
coming from the new package, it is copied to a backup file
whose name will have the suffix "_koha_<old_version_number>"
or "_upgrade_backup", depending on whether
the --prev-install-log option was used or not
during 'perl Makefile.PL'.
The directories whose files were backed up were
chosen because they contain configuration and
HTML files that a non-programmer Koha user
is likely to change. Consequently, the backup
files produced by 'make upgrade' are not a substitute
for doing a complete backup of one's Koha
installation before upgrading.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
All new authority features will be based on the DOM indexing.
To update an existing installation, do the following:
[1] run perl Makefile.PL
[2] make
[3] make update_zebra_conf
[4] copy the new koha-conf.xml to $KOHA_CONF
Signed-off-by: Chris Cormack <crc@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
KOHA_CONF now set to blib/KOHA_CONF_DIR/koha-conf.xml
for the purpose of running the test suite.
Signed-off-by: Chris Cormack <crc@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
This target is meant to allow the easy updating
of the Zebra configuration files from an installation
package.
This has been tested for a 'dev' mode install, not
for the other types.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
This version of DBD::mysql is required in order to have
proper handling of UTF8 strings.
Also bumped version of YAML::Syck down to 0.71 to
match Debian stable package.
Signed-off-by: Chris Cormack <crc@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
When using mysql and a sufficiently recent version
of DBD::mysql that actually respects the mysql_enable_utf8
option, setting the current branch to a name that
includes a diacritic causes the session to fail
and forces the user to the login screen upon
clicking another link.
This turned out to be due to the default (Data::Dumper)
serialization used by CGI::Session, which truncated the
session object at the diacritic. By enabling
that module's YAML serialization option, the problem
was resolved.
This patch introduces a dependency on the YAML::Syck
module.
Signed-off-by: Chris Cormack <crc@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
[1] Map new directory misc/bin to SCRIPT_DIR
instead of SCRIPT_DIR/bin.
[2] rewrite-config.PL no longer removes execute mode
[3] Add new Zebra startup script to rewrite-config.PL
list.
[4] Added KOHA_USER and KOHA_GROUP to rewrite-config.PL
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
