This patch set replaces and extends Koha's current sound options.
This is implemented be removing the existing sound system, and
re-engineering using a table of selector/sound combinations such that
the highest precedence selector that is found in the DOM will trigger
and audio alert. The existing audio behaviors are implemented as a set
of default audio alerts.
Test Plan:
1) Apply this patch set
2) Run updatedatabase.pl
3) Enable the AudioAlerts system preference
4) Test existing sounds
5) Enter the new alerts editor in the admin section
6) Add a new audo alert with the following selector:
"body:contains('Check in message')",
choose any sound alert you wish, make sure it's not one of the 3
sounds already used! Make this selector precedence 1
4) Browse to the checkins page, you should hear the default sound
5) Attempt to return an invalid barcode, you should hear your custom sound!
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
On the checkin page, the table is always filled with info of the scanned
barcode, even if the checkin has failed.
When the checkin fails, there is already an error displayed, so there is
no need to keep a row for fails.
Test plan:
Confirm that the failed checkins don't appear anymore in the checkin
table.
- checkin an item which is not issued;
- BlockReturnOfWithdrawnItems is set and item is withdrawn;
- Not returned at the right place;
- privacy=2 and AnonymousPatron not correctly set;
Before this patch this behavior existed only for bad barcode.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I confirm that the checkin table hasn't to be populated with info on items
which haven't been checked in.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Follow up to fix QA issues from comment #15
...and amended for comment #18
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Patch to remove deprectated C4::Dates from:
- circ/circulation.pl
- C4/Circulation.pm
- koha-tmpl/intranet-tmpl/prog/en/modules/circ/circulation.tt
To test:
- Apply patch
- Go to the checkout site (Home > Circulation > Checkouts)
- Verify that data displays properly (including for users with a card
that expires in the near future, see syspref 'NotifyBorrowerDeparture')
- Search for regressions
- prove -v t/db_dependent/Circulation.t
(Amended following comment #9 / #11 25.10.2015 /mv)
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Corrected enddate (subtraction in the revised code must be an addition).
Replaced hardcoded 2 days by a constant.
Renamed the constant TWO_DAYS to PULL_INTERVAL.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested all three date formats.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch uses Koha::DateUtils instead of C4::Dates and Date::Calc. It
also sent DateTime objects to the template, which use the TT plugin to
display them.
If an invalid dates is entered, the default date is picked.
Test plan:
1/ Go to Home > Circulation > Holds to pull
2/ Verify that the the filter and the list behave as before
3/ Enter invalid dates and confirm that you do not get a software error
Counter patch works as expected and is a much cleaner solution.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The patrons search used by the checkout tab and the autocomplete is not
the same as the "search patrons" tab.
The main difference is the "contain" vs "start with".
So that if you have a patron with a patron with a surname "foo bar" and
you search for "foo bar", the autocomplete and the result of a search by
the checkout tab will search for "foo%" or "bar%" which won't return the
patron you are search for.
This patch replaces both autocomplete and checkout tab searches with a
"contain" search. The search will be "%foo%" or "%bar%".
Note that on big DB, this can cause unexpected results.
Test plan:
Create a patron with a surname "foo bar"
Search for "bar" using the checkout tab.
You should see the patron in the autocomplete result and the result page
after submitting the search form.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The introduced syspref was defined before we added new guidelines
for them. This patch puts them in sync with current standards. It also
splits them into:
- A big on/off switch (BatchCheckouts)
- Patron category filter (BatchCheckoutsValidCategories)
The latter is expected to go away if we move this into a boolean column
on the 'categories' table, which seems a better approach. I'm filling a
new bug for this last comment.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is a squash of the following patches:
Bug 11759: (follow-up) Prevent access to the batch checkout if not allowed
If a user pass '&batch=1' to the url, he was allowed to access to the
batch checkout page even if the patron is not in an authorised
category.
This patch also fixes the link to "Batch check out" from the "Details"
tab (cf changes in circ-menu.inc).
Bug 11759: FIX Javascript error
The following JS error occurred:
ReferenceError: MSG_ADD_MESSAGE is not defined
The circulation.js file is useless and should not be included.
Bug 11759: FIX the alert message if an item is on hold.
If an item is on hold, the hold is not cancelled.
This patch corrects the message displayed in this case.
Bug 11759: FIX issue list is empty
The issue list is empty after checking an item out to a patron without
existing checkout.
To reproduce:
- Search for a patron without checkout.
- Check an item out using the "normal" checkout.
- Verify the checkout list contain the checkout.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This patch is the main patch.
It adds:
- the new template circ/circulation_batch_checkouts.tt
- the change into circ/circulation.pl
=== Why this feature is useful for some libraries? ===
Currently Koha does not allow to checkout several items at once to a
user. This can cause a waste of time when a user want to checkout more
than 10 items.
This development has been asked to have statistics on in-house use.
Every night, a librarian will enter a barcode list (from a file or a
scanner : the librarian scans the barcode of the documents that users
let on the tables). Barcodes will be added to a statistics patron in
order to count the number of items consulted.
The development has been expanded to cover another need: some special
libraries (BDP for "Bibliotheque departementale de pret": "Loan Regional
Library").
These libraries loan items to smaller libraries (municipal). The number
of items could be very important and the current way offered by Koha is
not adequate.
=== Test plan ===
0/ Apply all patches and execute the DB change entry.
1/ Verify you are abble to do some checkouts (with confirmations,
errors).
= Statistics way =
2/ Create a statistical patron (e.g. category code STATS).
3/ Update the batch_checkouts pref with the category code (STATS).
4/ Go on the member page and verify the new "Batch check out" tab
appears (and only for this user).
5/ Check some items out on the new page using the textarea or a file.
6/ Verify the table contains the item's information and the
"Information" column contains "Local use recorded".
= Real checkouts =
7/ Create a non statistical patron and update the pref.
8/ Check some items out on the new page using the textarea or a file.
9/ Verify the information in the table is consistent.
10/ Verify item without confirmation needed or impossible alert is
checked out.
11/ If the logged in user has the "force_checkout" permission, all
checkouts with a "confirmation needed" message can be done.
If the logged in user does not have it, there is no way to force the
checkout.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch does not introduce any changes.
It prepares the circulation script to accept several barcodes in
parameter.
A loop is done on all barcodes (until now, only 1) to generate a
structure to sent to the template.
At the end, only the first generated data is sent.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If an item is due today 23:59 and the filter is from yesterday
to today, the overdue won't appear on the list.
Test plan:
Be sure you have an item due on DATE 23:59
Search for overdues from DATE-1 to DATE
Without this patch, the item won't appear.
With this patch, it will.
Regression test: test the CSV download.
Note: On the way, this patch remove the deps to C4::Dates
(which was the original goal of the bug report).
Issue reproduced, it's resolved with this patch.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Same as previous patch for calls in pl scripts.
Test plan:
- delete an entry of your search history from intranet and opac
- with IndependentBranches=OFF, go on the waiting holds and confirm that the
link next to 'Holds awaiting pickup for your library on' is correct.
- search for items, the pagination should work correctly
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Note that the previous patch was wrong, the start date defaulted to yesterday,
the original behavior is to default to last year.
This patch removes some unecessary variable declarations and tests.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes C4::Dates from circ/reserveratios.pl
To test:
- Make sure you have many holds for biblios with not so much items (e.g. 5 holds, 1 item)
or follow hint below
- Go to Home > Circulation > Hold ratios
- Verify that everything works the same without an dwith patch
Hint: To get a big table you can set 'Hod ratio' in the filter to 0.1 (default value is 3).
This was will trigger biblios with less holds than items.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. Tested with dateformat syspref, datepiker Ok
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch set adds the ability to defined independent quotas for on-site
checkouts.
This will be done using the circulation rules matrix where a new column
“Current on-site checkouts allow” will be added.
This feature is going to use the same method as the existing fields maxissueqty
("Current checkouts allowed"), the new fields will be added to the
different tables (see the "DB changes" patch) and will be named
maxonsiteissueqty (for consistency).
In order to keep the existing behavior and to let more flexibility,
a new system preference is added (ConsiderOnSiteCheckoutsAsNormalCheckouts).
This syspref will let the liberty to the library to decide if an on-site
checkout should be considered as a "normal" checkout or not.
To keep the existing behavior, the syspref will be disabled (i.e. an on-site
checkout is considered as a normal checkout) and the number of on-site
checkouts will be the same as the number of checkout (maxissueqty ==
maxonsiteissueqty).
Technically:
There are only very few tests for the Circulation module, and the 2
subroutines impacted by this patch set were not tested at all.
It is necessary to introduce non-regression tests for this area.
The 2 subroutines are: C4::Circulation::GetBranchBorrowerCircRule
and C4::Circulation::TooMany (only called by
C4::Circulation::CanBookBeIssued, so we will take the liberty to change
the prototype to raise a better warning to the end user).
Test plan:
I. Confirm there is no regression and the existing behavior is kept
0/ Let the syspref disabled
1/ Set a rule to limit to 2 the number of checkouts allowed
2/ Do a normal checkout
3/ Do an on-site checkout
4/ Try to checkout (on-site or normal) an item again.
You should not be allowed.
II. Test the new feature - pref disabled
0/ Let the syspref disabled
1/ Set a rule to limit to 2 the number of checkouts allowed and to 1
the number of on-site checkouts allowed.
2/ Do an on-site checkout
3/ Try to do another one, you should not be allowed to do it.
4/ A normal checkout should pass successfully
Note that it does not make sense to have the number of on-site checkouts
alowed > number of checkouts allowed.
III. Test the new feature - pref enabled
0/ Enable the syspref
Now an on-site checkout is *not* counted as a normal checkout.
This means you can have the number of on-site checkouts > number of
checkouts allowed.
1/ Set the values you want for the 2 types of checkouts (normal vs
on-site).
2/ Even if a patron has reached the maximum of checkouts allowed, he
will be allowed to do a on-site checkout (vice versa).
IV. Stress the developper
Using the different configurations available in the circulation matrix,
try to find one where the checkout is allowed and not should be.
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The KohaDates plugin does that, it's not necessary to split the output.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes deprecated C4::Dates from circ/bookcount.pl
To test:
- Search for biblio with an item that has been checked out several
times and that has been transferred
- In left navigation click on 'Items'
- In list of items click on 'View item's checkout history'
- Verify that dates in 'Date arrived at current library' and in
column 'Last seen' display properly.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
From bug 7981:
GetBranchItemRule expects an itemtype, a scalar.
Here $itemtype is a hashref returned by C4::ItemType->get.
So $itemtype->{itemtype} should be passed.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Test plan: See Bugzilla.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
On the checkin and checkout page, the checkin will fail if the patron
has requested the privacy and the AnonymousPatron is not correctly set.
This patch adds a warning message on both pages.
Test plan:
0/ Be sure you don't have any patron with privacy=2 (Never)
1/ Set OPACPrivacy, not AnonymousPatron
2/ Go on the checkin, you should a warning (same as before this patch).
3/ Set the privacy=2 for a patron
4/ Go on the circulation page, a warning should appear (for this
specific patron)
5/ Check an item out to this patron
6/ Check the item in on the checkin page.
The item is not checked in and you get a specific message for this
patron.
Confirm other/correct situations don't trigger the messages.
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Test plan:
1. Ensure that ExpireReservesMaxPickUpDelayCharge is set to 0.
2. Place a hold (doesn't matter whether it's a bib/item-level hold),
then confirm the hold by checking it in.
3. Check in the item again, and hit Cancel.
4. The reserve in question should be cancelled.
5. Repeat steps 2-4 twice, once after setting
ExpireReservesMaxPickUpDelayCharge to a nonzero value and again
after clicking the "Forgive fees for manually expired holds"
checkbox.
A fine should only be applied when the syspref is enabled and the
checkbox is not checked. Also, the checkbox should only appear after
enabling the syspref. And finally, the checkbox should remember whether
it is checked across multiple checkins, same as the "Forgive overdue
charges" and "Book drop mode" checkboxes.
Signed-off-by: Jason Burds <jburds@dubuque.lib.ia.us>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: Removed 2 debugging lines.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This is the original patch for bug 12892 and replaces the older style of
fetching the holds data with Koha Objects. It will be used as a
foundation for future features.
Test Plan:
1) Apply this patch
2) Create a hold, set to waiting
3) Browse to circulation.pl for that patron
4) Note you see the list of waiting holds
5) Switch your logged in branch to a different branch
6) Note the "Waiting at" line is no longer emphasized.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Cathi Wiggins <CWIGGINS@ci.arcadia.ca.us>
Signed-off-by: Megan Wianecki <mwianecki@mplmain.mtpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The first error is caused by the fact that
$messages->{'IsPermanent'} is undefined.
The second error is caused by querying the CGI
parameter 'barcode' inside a function call. This is not required.
There is a variable $barcode set with the parameter. Changed to
use the variable.
TEST PLAN
----------
1) Test first patch.
2) Clear the log
3) Put in a barcode which is not checked out.
4) Check the log.
-- should be two errors. One about a hash,
the other will only be detectable under Debian 8.
5) Apply this second patch
6) Clear the log
7) Put in a barcode which is not checked out.
8) Check the log.
-- should be empty.
9) run koha qa test tools
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Test plan
=========
1/ check out an item and then check it back in.
1/ check the logs after the check-in to see the warns from
returns.pl line 623 of :
(a) Use of uninitialized value $holdingBranch
(b) Use of uninitialized value $collectionBranch
2/ apply patch
3/ check out and check-in again. no warns are recorded this time.
NOTE: Under Debian Jessie, there are other messages.
Additionally, this only corrects the line 623 ones.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch adds a "Don't Check Out and Print Slip" button to the dialog that appears
when trying to checkout a reserved item.
Test case :
* Put a hold on an item for User A.
* Try to check out it item with User B.
* The "Please confirm checkout" box should appear. The "Don't Check Out and Print Slip" button should appear in this box.
* Click on the "Don't Check Out and Print Slip" button.
* A print popup will appear
Signed-off-by: Nick <Nick@quechelibrary.org>
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
On moremember, the button is displayed for Organisations.
To be consistent, it should be displayed on the circulation page too.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Patch makes several small changes to the template for the
'Transfers to receive page'
1) Show the branch name instead of the branchcode in the
table of incoming transfers.
If there is a hold connected with the transfer:
2) Show the patron's name as 'surname, firstname'
intead of 'surname firstname'
3) Restore broken feature: Show a mailto: link with a
generated subject of 'Hold: <title>'.
The mailto: feature actually existed in the templates, but
was broken to a misnamed database column. I made some small
changes to make the subject translatable (see bug 8330).
To test:
- Create a transfer by placing a hold with pickup at another library
- Craete a transfer manually
- Go to the circulation > transfers to receive
- Check the changes explained above, compare before and after
- Check the mailto: link works as expected
Bonus: Check the Hold: bit in the subject is really translatable now.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The parameter was lost in previous commit.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Note that homebranchname is never used in the template.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch removes HomeOrHoldingBranchReturn syspref and makes circ/returns.pl respect branch
circulation rules from C4::Circulation::GetBranchItemRule. Also transfer slip notice should reflect this.
Default should always be to return item to home branch.
Test plan:
- make sure syspref 'AutomaticItemReturn' is set to 'false'
- unset 'Default checkout, hold and return policy' or set 'Return policy' to 'Item returns home'
- checkout an item and do a checkin from different branch than items homebranch
- verify that you're prompted with a transfer message to item's home branch and that print slip matches
- set 'Return policy' to 'Item returns to issuing library'
- do a checkout and a checkin from branch different than item's home branch
- verify that you're not prompted with a transfer message and that holding library is your current branch
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Follow-up:
- Added 3 tests in t/db_dependent/Circulation_Branches.t to test AddReturn
policies
- Removed HomeOrHoldingBranchReturn from sysprefs.sql
- Added notice on removing syspref in updatedatabase
QA edits:
- removed trailing whitespace in tests
- moved branchname lookup from returns.pl to template
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Test Plan:
1) Apply this patch
2) Renew an item via circ/renew.pl
3) Note the branch code of your logged in library is set as the
branch in the generated statistic line
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested pre and post patch, now branch is saved
No errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(Introduced by bug 13601)
Test plan
=========
1/ enable 'OnSiteCheckouts' pref under Circulation Preferences
2/ go to the checkouts page and try to issue an item to any user.
3/ when the item barcode entry form shows, select the 'On-site
checkout' checkbox
4/ the default date due should show as today with 00:00 as HH:MM
5/ apply the patch
6/ repeat steps 2 - 3. The default date due should show today's
date with 23:59 as HH:MM.
7/ run koha-qa.pl -c 1 -v 2
Remarks: Testing result match expected test plan output. The QA tests
pass with "OK" for the commit.
Technical note: There is a confusion with iso and sql date formats at
some places in the code.
A better way should be provided (later) to fix globally the mismatch
between these 2 formats.
What happened before this patch: the DateTime was cast to a string and
the template received "YYYY-MM-DDTHH:MM:SS" which is an iso formatted
date. BUT this format is not managed by Koha::DateUtils::output_pref
("iso" and "sql" are considered as indentical which is wrong).
As I did not estimated the problem (how big it is) I prefer to fix it
easily (and dirty) for now.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The script that returns data for the patron autocomplete does not use C4::Members::Search. Instead it uses bespoke code that does not behave like the traditional search and is very limited in how it can search.
If, for example, I search for "Kyle Hall" in the standard search, I would get "Kyle Hall" back as a result. For the autocomplete search, I will not.
This script should use C4::Members::Search to provide better searching and to keep the code base DRY.
Test Plan:
1) Enable the system preference CircAutocompl
2) Create a user with the first name "Test" and the surname "User"
3) Perform a checkout autocomplete search for "Test User"
4) Note you do not get the user as a result
5) Apply this patch
6) Try different combinations of "Test" and "User" such as
Test User
User Test
U Test
Test U
etc.
7) Note these searches now work
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch displays the address information in the left column of the patron's pages using the new system preference.
The address is formatted in member-display-address-style-us.inc and member-display-address-style-de.inc
To test:
- Apply patch on top of 1st and 2nd patch
- Select 'German style' in system preference 'addressformat' in I18N/L10N
- Verify that the address information displays properly in the left column of all patron's pages.
- Verify that the address displays properly in the main area of moremember.pl as well (Note: In right column, Alternate address /contact are not yet touched))
- Switch system preference to US style, repeat checks
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
AMending without changes to put this patch at the end of the patch list / Marc
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The biblionumber is sent to the template as 'itembiblionumber' at 1 place, the template get the 'biblionumber' variable.
I don't understand why but the easy way is to sent the variable twice.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The problem has been well described by Kyle and Nicole on bug 7255
description and comment 1.
With this counter patch, I suggest to popup AFTER the return has been
confirmed. This will remove the race condition and avoid to pass
itemnumber to the pl file as in the patch submitted by Olli.
Only the borrowernumber and biblionumber are needed (transfer and op are
never used by circ/hold-transfer-slip.pl).
Test plan:
It is very hard to know all cases (at least 6) where the popup is
displayed. Try at least to get the hold and the transfer confirmation
messages.
You should get the popup if you click on "print slip" button.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It seems that many librarians find it disconcerting to have no feedback
with the new checkouts table. It seems that many of them wait for it to
fully load, check to verify the item was checked out, and only then
check out the next item.
To help alleviate this issue, we can have the checkouts page give
feedback about the item that was just checked out.
Test Plan:
1) Apply this patch
2) Check an item out
3) Note the message "$title ($barcode) due on $date_due"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This works well and fixes a very problematic issue with the new AJAX
circ. I will be submitting a follow-up which I think is an improvement
to the display.
Signed-off-by: Jason Burds <jburds@dubuque.lib.ia.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch uses the same method as bug 13894.
Important note: This will modify the UI.
The patron list will now be displayed in a table (instead of a select).
Test plan:
1/ Search for a patron using the checkout tab
2/ The patron list should appear correctly
Test with different type of search (returns 0, 1, 1+ results).
No behavior changes should be observed.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
works as expected
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Using the autocomplete feature in the patron search, if one value is
missing (i.e. country), it will be replaced with 'null'.
The default value should be an empty string.
Test plan:
0/ Enable the patron autocomplete feature
1/ Create a patron without value for country, address, zipcode, city
2/ Go on the circ home page
3/ Search for this patron. The country should not have been replaced by
"null".
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The pref AddPatronLists does not work as expected if 'generic' is
selected.
Indeed a patron should be linked to a valid patron category (see the
constraint borrowers_ibfk_1 in the DB structure).
Test plan:
0/ Confirm that the AddPatronLists does not work as expected if you choose
the generic patron types.
1/ Delete all you patron categories and check that the interface invites
you to create one.
2/ Confirm that you are able to create a patron and to link it to a patron
category you have created.
I could not verify step 1/, because at least one Patron category
can not be deleted (Staff, since I'm logged in as a Staff patron
and you can not delete categories that are in use).
Tested 0/ and 2/
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test Plan:
- Create an overdue item.
- Navigate to overdue circulation report (Home -> Circulation -> Overdues)
- Notice there is no card number showing in the Patron column.
- Apply patch.
- Refresh page.
- Notice there is a card number showing in the Patron column.
Signed-off-by: Justin <justinvos@live.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The circulation page has a new entry: a link to a list of the pending
in-house use.
Bug 10860 introduces a new way for managing in-house uses.
This patch adds a new page (from the circulation home page) to list all
pending in-house uses.
Test plan:
Go on the circulation home page and click on the in-house use link.
Verify all your in-house uses are listed and information are consistent.
Bug 11201: Display lib instead of AV code
This patch assumes that items.location is linked the the LOC
authorised values.
Signed-off-by: Nicole <nicole@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To get rid of SQLHelper, we should not use this C4::Members::Search anymore.
Test plan:
0/ Enable the CircAutocompl pref
1/ Go on the circulation home page, or the reserve page
2/ Search for a patron and wait for the autocompletion box
3/ Confirm there is no regression
Works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This will remove the restriction that forces the due date for
an on-site checkout to the end of the current day.
It will still suggest the end of the day, but you will be able
to change the date to whatever you want using the datepicker
widget.
To test:
Before applying the patch:
- Turn on OnSiteCheckouts and OnSiteCheckoutsForce
system preferences
- Check the on-site use checkbox and try to set due date
manually, it should not be possible
- Check out the item and check the due date is set to the
end of today
- Put a restriction on your patron account and repeat steps,
the item checked out should again have a due date at the
end of the day
> There should be no way to be able to check out an item
with a 'custom' due date
Apply the patch:
- Repeat steps from above, check out
- on-site use without a restriction on your account
- without changing the due date
- with a due date picked with the datepicker
- on-site use with a restriction on your account
... see above
- no on-site use but with a specified due date
- no on-site use, not specifying a due date
- Turn off SpecifyDueDate
- on-site use with and without restriction should
set the due date automatically to the end of the date
now, altering the due date should not be possible.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Added small patch to allow barcode as input in TransferSlip routine, mostly
to allow generating transfer slips where only barcode is present (aka.
javascript).
Test plan:
1) find book with <barcode> and <itemnumber>
2) generate transferslips with both:
transfer-slip.pl?transferitem=<itemnumber>3967925&branchcode=MPL&op=slip
transfer-slip.pl?barcode=<barcode>&branchcode=MPL&op=slip
and verify that the generated slips match.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Edit:
- Added tests in t/db_dependent/Circulation_transfers.t
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Passes tests and QA script.
Works with both itemnumber or barcode as described.
Tested printing transfer slips with the URL examples given
and in the UI.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
