In Koha, any report that uses C4::Reports::Guided will be limited to 999,999 rows. This is causing problems for larger libraries where some reports may have over a million results.
Test Plan:
1) Create a report "SELECT * FROM borrowers" and run it, note the number
of results
2) Apply this patch
3) Add the line `<report_results_limit>3</report_results_limit>`
within the <config> block of your koha-conf.xml
4) Restart all the things!
5) Run the report, download the results as a CSV
6) Note your CSV only has 4 lines, the header and 3 patrons
Signed-off-by: Rachael Laritz <rachael.laritz@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5e29433bdc)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To reproduce:
$ perl koha/misc/admin/koha-preferences get MarcFlavour
This will output something like "HASH(0x55dd4d432840)".
To test:
Apply this patch and run the command again:
$ perl koha/misc/admin/koha-preferences get MarcFlavour
This should output something like "MARC21".
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 3f1fe4f178)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Overdue emails are either sent from the issuing or the home
library of an item. We never use the patron's home library,
so the reply-to address must explicitly be set in EnqueueLetter.
To test:
- Set up 2 branches (A and B) with different email addresses.
- Set up an SMTP server for each to use
- Set up an overdue notice trigger for the patron category you'll use
First letter: 1 day delay, any notice
- Check out an item with home branch B to a patron from A
- Run the the script with:
overdue_notices.pl -t --frombranch item-homebranch
overdue_notices.pl -t --frombranch item-issuebranch
- Confirm for each setting that the correct email headers have been
used. You can see the reply-to address and to-address in the
message queue:
SELECT * FROM message_queue;
Signed-off-by: Nason Bimbe <nason.bimbe@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 18b2389de4)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
-Have some Syndetics credentials
-Turn on SyndeticsCoverImages
-Look at some and you'll notice that Syndetics cover images dont always load
-If you view the page source you'll see why. The links are built like this:
https://secure.syndetics.com/index.aspx?isbn=/LC.GIF&amp;client=bedf&type=xw10&upc=843501038123&oclc=1311289389
-Apply patch
-Cover images should load properly.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 10ced3c494)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Andrew <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 12bc623ae7)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
We should not generate the report if the job hasn't started yet
Test plan:
Stop the koha-worker processes, modify a new item using the batch mod
tool, then see the detail page of the job
Without this patch an error is generated:
Can't use an undefined value as an ARRAY reference at /kohadevbox/koha/Koha/BackgroundJob/BatchUpdateItem.pm line 175
Signed-off-by: Andrew <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 931f4bd797)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When using the authority finder plugin (authorities/auth_finder.pl),
you can pick an entry from the 'Special relationship:' dropdown menu
in order to set the relationship between authorities.
However, in UNIMARC instances the relationship codes listed are those
for MARC21. The correct codes for UNIMARC are listed in pages 93-94
of the IFLA UNIMARC Manual for Authorities.
Test plan:
1) In a UNIMARC instance, launch authorities/auth_finder.pl in the
Staff client, by clicking on the 'Tag editor' button. Notice how
the 'Special relationship:' dropdown menu lists the relationship
codes for MARC21 instead of UNIMARC.
2) Apply this patch.
3) Launch the authority finder again; this time the correct values
should be listed in the 'Special relationship:' dropdown menu.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit a5dfa2d490)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds a section about the --since option in the help section
of borrowers-force-messaging-defaults.pl
To test:
0) Apply patch
1) run the script with the --help option, e.g.
./misc/maintenance/borrowers-force-messaging-defaults.pl --help
--> There should be an explanation of the --since option with examples
for specific and relative dates
2) Optionally, run the script with different options
--> The behaviour shouldn't have changed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 42b3169120)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch removes a regex that discard lines in multiline YAML values
On close inspection, there is no need for it.
To test:
1) go to misc translator, update some language
./translate update fr-CA
2) check missing string
egrep "You may pick up your article" po/fr-CA-installer.po
from sample_notices.yaml
3) apply the patch, repeat 1)
4) repeat 2), verify the string is present in the translation file
5) translate the new string, install the language,
verify string is present in the translated file
./translate install fr-CA
check fr-CA/mandatory/sample_notices.yml
There are three new strings
msgid "%sDear %s %s,%s"
msgid "%s%s%sTitle: %s"
msgid "%sYou may pick up your article at %s.%sYou can download the scanned materials via the following url(s): %s.%s"
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 99790c6c38)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch hides the Article requests column in the large circulation
rules table when the ArticleRequests system preference is disabled.
To test:
0) Apply patch
1) With ArticleRequests disabled, go to Administration > Circulation and fines
rules
2) Scroll right in the first table
--> There isn't any mention of article requests in the table
3) Scroll down to see the other tables in the page
--> There are no other article requests tables
4) Enable ArticleRequests in Administration > System preferences
5) Go back to the Circulation and fines rules and refresh the page
6) Scroll right in the first table
--> There should be an article requests yes/no column
7) Scroll down to see the other tables in the page
--> There are other article requests tables, Default open article requests
limit and Default article request fees
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 4b875fa936)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Before this patch the date formatting for the due date was done
in the .pl instead of the template and the branchcode would show
instead of the library's name in the list of items when placing
an item level hold in the OPAC.
To test:
* Find or create a record with mulitple items
* Check out one of the items
* Place a record level hold
* Return an item to set to waiting
* Place an item level hold
* Go to the OPAC and start placing an item level hold
* Verify the messages in the item table show the branchcode
* Apply patch
* Only visible change should be the library name replacing the branchcode
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 2353893c1a)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch does what the title says.
To test:
1. Run the script
2. Check the action logs
=> FAIL: Boo, no record of the running cronjob
3. Apply this patch
4. Repeat 1-2
=> SUCCESS: Yay!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Liz Rea <liz@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e4d2ef0f46)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
$itemLoopIter->{reservedate} = $first_hold->reservedate,
$itemLoopIter->{ExpectedAtLibrary} = $first_hold->branchcode;
1st line ends with a comma instead of a semicolon.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 4ddf182192)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 92f5e02a8c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit eedec9e929)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1 - Update ComponentSortField system preference and verify biblionumber is an option
2 - Repeat test plan from 30327 and confirm sorting with biblionumber works
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 505e12970d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Same as before, but test with UNIMARC setup
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit fbf1c32a6f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Repeat previous tests with Elasticsearch engine
You will need to reindex and reset mappings to pickup the changes form the file
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit c8c51867c4)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch updates the Local-Number indexing by adding a zeropad option
to Zebra indexing and adding this to the mapping files
It also updates C4/Search.pm to allow biblionumber as an option
To test:
1 - Apply patches
2 - copy etc/zebradb/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl to /etc/koha/zebradb/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl
3 - Restart all, reindex zebra
4 - Browse to: http://localhost:8081/cgi-bin/koha/catalogue/search.pl?idx=kw&q=a&sort_by=biblionumber_dsc&count=20
5 - Confirm records sorted correctly
6 - Browse to http://localhost:8081/cgi-bin/koha/catalogue/search.pl?idx=kw&q=a&sort_by=biblionumber_asc&count=20
7 - Confirm records sorted correctly
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 230bae0b02)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The YAML preference definition defines it as a string ('yes' or 'no' the
possible values). And the opac-suggestions.tt template has one occurence
of the variable being compared to a string.
This patch does:
- fix the template
- fixes opac.pref for 0|1
- adds an atomicupdate that takes care of moving 'yes' and 'no' to their
respective boolean values.
To test:
1. Change the syspref value to enable/disable
2. Check on the DB that the value is wrong:
$ koha-mysql kohadev
> SELECT value FROM systempreferences WHERE variable='OPACSuggestionAutoFill';
=> FAIL: It is either 'yes' or 'no' depending on what you choose.
3. Apply this patch
4. Run:
$ updatedatabase
5. Repeat 2
=> SUCCESS: Values are now 0 or 1
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 1c0b7bf01f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Compacting the code a bit too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit ad0aa754ee)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The _add_default_csrf_params internal function accesses
C4::Context->userenv without checking that it has been defined. I think
not all of the potential callers of it declare that they require a
defined userenv, so we should test and provide defaults for required
values if it is not defined, to avoid some "Can't use an undefined value
as a HASH reference" HTTP 500 Internal Server Errors.
To test:
Do anything that requires a form with CSRF token, such as editing your
details. Behaviour should be unchanged. To test the failure case, you
would need some customised code that indirectly generates a CSRF token
before setting the userenv up and I am not sure there is any in released
Koha yet.
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Looks good to me. Working as expected.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 8c45fe1aaa)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Add pageLength to members/member.tt
Add aLengthMenu and pageLength to
patroncards/add_user_search (common/patron_search.tt).
Add aLengthMenu, pageLength, and iDisplayLength to patroncards/edit-batch
Test plan:
1. Set the PatronsPerPage system preference to any integer other than 20.
2. Go to Tools -> Patron card creator.
3. Start a new Card Batch.
4. Click the 'Add patron(s)' button to open the patron search window.
5. Do a search.
6. Add more than 20 patrons to the batch.
7. Close patron search window.
8. Click the 'Add patron(s)' button to add the selected patrons to the batch.
9. Observe that the table of patrons is has 20 as the default per page setting.
10. Apply patch.
11. Reload the batch.
12. Observe that the per page drop down includes the value of PatronsPerPage
and that value is selected by default.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5ca665f6aa)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
My research indeicates that tinytext of less than 40 bytes uses
about the same storage as a varchar(255). Also, using
a TEXT field in a complex query may create a temp table.
varchar fields are also more efficient for sorting on.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5266069016)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit b3a0d75a40)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When something is changed by a cronjob, and that entity is logged via action logs, we can know what changed, and that it was via a cronjob, but we cannot necessarily know which cronjob made that change. The closest we can come is to find the action logs for the cronjob module which ran before the change which is by no means reliable assuming the CronLog is even enabled.
We should add a new column to action logs to store the name of the script ran for any action logs where the interface is "cron".
Test plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Enable all the Log/Logging sysprefs
4) Run some cronjobs that will generate action logs
5) Note the new action_logs column "script" contains the filename of the
cronjob that caused the change.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 18fd0c89cf)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 4a00658e34)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
If I run a query like "SELECT NOW()" from a koha report, I will get a different answer than if I had run it from koha-mysql.
In Koha, we set the timezone for each database connection.
However, koha-mysql does not do this, so instead we are left using the default timezone of the database.
Test Plan:
1) Set your time zone to something other than the database time zone
2) run "SELECT NOW()" using debian/scripts/koha-mysql
*not* /usr/sbin/koha-mysql
3) Note you get the database timezone's current time
4) Apply this patch
5) Repeat step 2
6) Now you get the correct time!
Signed-off-by: Michal Urban <michalurban177@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e97b099d58)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
1. Stage a MARC record for import
2. Once you have one click on 'Manage staged records'
3. You will see an alert that says "Something went wrong when loading the table."
4. If you dismiss that you should see the following error:
DataTables warning: table id=records-table - Requested unknown parameter '' for row 0, column 4. For more information about this error, please see http://datatables.net/tn/4
5. Appy patch
6. Try ssteps 1 & 2 again
7. No DataTable errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 573db0fca1)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Make the message deletion confirmation popup translatable. Test plan
uses fr-CA translations.
Test plan:
1) Switch language to french (fr-CA)
If you do not have the translations, go to
misc/translator
then do
./translate install fr-CA
After it is done, go to administration > global system preference >
l18N/L10N then select Français (fr-CA) under language preference.
Refresh then you should be able to switch languages.
2) Add a message to a patron account from your own branch (or make sure AllowAllMessageDeletion is on)
3) Click "Delete" next to the message
--> a confirmation message appears "Are you sure you want to delete this message? This cannot be undone." with options "Cancel" and "OK".
4) Apply the patch
5) Write a translation in misc/translator/po/fr-CA-messages-js.po :
msgid "Are you sure you want to delete this message? This cannot be undone."
msgstr "Êtes-vous sûr de vouloir supprimer ce message? Cette opération est irréversible."
6) Refresh the translations by going to misc/translator and execute ./translate install fr-CA
7) Refresh and click "Delete" again
--> now the confirmation message is "Êtes-vous sûr de vouloir supprimer ce message? Cette opération est irréversible." with options "Cancel" and "OK"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 622137294a)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Keyboard shortcuts for catalog search, check in and renew should be following:
1) Alt-q for catalog search
2) Alt-r for check in
3) Alt-w for renew
However on some of the pages shortcuts get mixed up:
1) Alt-w for catalog search
2) Alt-q for check in
3) Alt-r for renew
Affected files are:
circ/pendingreserves.tt
circ/circulation_batch_checkouts.tt
circ/circulation-home.tt
circ/branchtransfers.tt
circ/branchoverdues.tt
circ/set-library.tt
circ/checkout-notes.tt
circ/renew.tt
circ/waitingreserves.tt
circ/transferstoreceive.tt
circ/offline.tt
circ/bookcount.tt
circ/on-site_checkouts.tt
circ/circulation.tt
circ/transfers_to_send.tt
circ/request-article.tt
circ/overdue.tt
circ/reserveratios.tt
offline_circ/list.tt
offline_circ/process_koc.tt
offline_circ/enqueue_koc.tt
plugins/plugins-upload.tt
plugins/plugins-disabled.tt
pos/registers.tt
pos/register.tt
pos/pay.tt
reports/reports-home.tt
reports/dictionary.tt
reports/guided_reports_start.tt
reserve/request.tt
tools/scheduler.tt
This is because the include statement for catalogue-search-box.inc is in the wrong line in circ-search.inc.
To test:
1) Go to an affected page (circulation-home was the first one I noticed)
2) Try the keyboard shortcuts and notice they are incorrect
3) Apply patch and refresh the page
4) Notice that the keys work properly
Signed-off-by: Andrew <andrewfh@dubcolib.org>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 94191e5bfe)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
There is a badly crafted regex used when extracting
strings in multiline fields in yaml files
The regex is my own, introduced in Bug 24262, sorry.
This patch correct it a little. Better eyes are welcome.
To test:
1) go to misc translator, update some language
./translate update fr-CA
2) check missing strings
egrep "Total out|Operator ID|August 31" po/fr-CA-installer.po
first two are from sample notices, third from sample creator data
3) apply the patch, repeat 1)
4) repeat 2), verify the strings are present in the translation file
5) translate some of the new strings, install the language,
verify strings are present in the translated files
./translate install fr-CA
check fr-CA/optional/sample_creator_data.yml and
fr-CA/mandatory/sample_notices.yml
There are some 60+ new strings.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 160d96e176)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
1. Add some patron attributes that are textarea and some that have an AV category so they are select dropdowns
2. Go to the patron form and add some values to the patron attributes
3. Use the "Clear" button to try and clear the values, doesnt work.
4. Apply patch
5. Try clearing values from patron attributes that are both select dropdowns and textarea. The "Clear" button should work.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit a3198f6474)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
After bug 29001 one is unable to save authorised value to frameworks
subfields. This is caused by minor typo in marc_subfields_structure.pl.
To test:
1. Edit e.g. default frameworks subfield 952$8
2. Add or change fields authorised value
3. Save your changes
=> note that on subfield listing there is no mention that 952$8 is linked to any authorised value
=> if you edit 952$8 authorised value input is empty
4. Apply this patch.
5. Repeat steps 1.-3.
=> authorised value should now be saved
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Emmanuel Bétemps <e.betemps@gmail.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit c39e47cbf3)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 6f8e77b4e8)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
There are 5 fields that are not set if no value is provided when saving/editing a rule in Administration->Circulation and fines rules
- issuelength
- hardduedate
- unseenrenewalsallowed
- rentaldiscount
- decreaseloanholds
This is problematic because it gives the impression these rules are set as blank, but in reality they don't exist and the rule will fal back to the higher level
To test:
1 - Set a rule for
Patron category: Teacher
Itemtype: All
Hard due date: (Today)
Lona period: 10
2 - Set a rule for
Patron category: Teacher
Itemtype: Books
Hard due date: (leave blank)
Loan period: 10
3 - Expected behaviour is Book item will checkout to teacher for 10 days, all other types will be due yesterday at 25:59:00
4 - Checkout an non-book item type to teacher
5 - Hard due date applies
6 - Checkout a 'book' item type to teacher
7 - Hard due date applies - FAIL
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit cf397ac3bc)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Silly mistake from bug 28786, the $type should be compared to "opac"
instead of "OPAC", erk!
Test plan:
Turn 2FA on
Set it up for an user
Login at the OPAC
=> Without this patch you keep being redirected to the auth form screen
=> With this patch applied you are able to successfully login
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e7bb0d2a5e)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e9891b84fe)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
We are sanitizing other attributes but "extended patron attributes".
Test plan:
Make a patron attribute editable at the OPAC
Edit an existing patron, or register a new one
Use a script tag in the new value ("<script>alert("booh!")</script>" for
instance)
With this patch the value is remove if containing an HTML tag that is
not br b i em big small strong (see C4::Scrubber)
Signed-off-by: Mark Hofstetter <koha@trust-box.at>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
no testing info provided
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 486f5af303)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
