Foreign keys should be added as a matter of course for new tables.
Argubably, borrower_debarments.manager_id could also be linked to
borrowers, but this patch does not do that.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a more extensible and flexible debarments system to Koha. The fields
borrowers.debarred and borrowers.debarredcomment are retained for compatibility and
speed.
This system supports having debarments for multiple reasons. There are currently
three types of debarments:
OVERDUES - Generated by overdue_notices.pl if the notice should debar a patron
SUSPENSION - A punative debarment generated on checkin via an issuing rule
MANUAL - A debarment created manually by a librarian
OVERDUE debarments are cleared automatically when all overdue items have been returned,
if the new system preference AutoRemoveOverduesRestrictions is enabled. It is disabled
by default to retain current default functionality.
Whenever a borrowers debarments are modified, the system updates the borrowers debarment
fields with the highest expiration from all the borrowers debarments, and concatenates
the comments from the debarments together.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Verify the borrower_debarments table has been created and
populated with the pre-existing debarments
4) Run t/db_dependent/Borrower_Debarments.t
5) Manually debar a patron, with an expiration date
6) Verify the patron cannot be issued to
7) Add another manual debarment with a different expiration date
8) Verify the 'restricted' message lists the date farthest into the future
9) Add another manual debarment with no expiration date
10) Verify the borrower is now debarred indefinitely
11) Delete the indefinite debarment
12) Verify the debarment message lists an expiration date dagain
13) Enable the new system preference AutoRemoveOverduesRestrictions
14) Set an overdue notice to debar after 1 day of being overdue
15) Check out an item to a patron and backdate the due date to yesterday
16) Run overdue_notices.pl
17) Verify the OVERDUES debarment was created
18) Return the item
19) Verify the OVERDUES debarment was removed
20) Disable AutoRemoveOverduesRestrictions
21) Repeat steps 15 though 18, verify the OVERDUES debarment was *not* removed
22) Add issuing rules so that an overdue item causes a temporary debarment
23) Check out an item to a patron and backdate the due date by a year
24) Return the item
25) Verify the SUSPENSION debarment was added to the patron
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds the ability to overlay by either itemnumber,
or barcode. Itemnumbers take precendence over barcodes, which
allows us to batch update item barcodes with an overlay.
Test Plan:
1) Create a new record with 2 items, make sure to give it a unique ISBN
2) Download the record as MARCXML
3) Edit the MARC XML
a) Delete one of the two items
b) Change the barcode in the barcode field to something unused
4) Transform the xml file into marc with xml2marc
5) Browse to 'Stage MARC records for import'
6) Upload the binary marc file
7) Choose the following options:
Record matching rule: ISBN
Action if matching record found: Ignore incoming record
Action if no match is found: Ignore incoming record
Check for embedded item record data: Yes
How to process items: Replace items if matching bib was found
8) Click 'Stage for import' button
9) Verify a matching record was found, then click 'Manage staged records' link
10) Verify the rules are still set correctly
11) Click 'Import this batch into the catalog'
12) The import should tell you:
1 record was ignored
1 item was replaced
13) View the record details and verify the item's barcode was replaced
with your updated barcode value
14) Download the record as MARCXML
15) Edit the MARC XML
a) Delete one of the two items
b) Delete the itemnumber field for the remaining item
c) Alter the item's callnumber to a new value
16) Repeat steps 4 through 12
17) View the record details and verify the item's callnumber was replace
with your updated callnumber value
Signed-off-by: Henry Bankhead <hbankhead@losgatosca.gov>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When staging biblios with items attached you previously had only two
options, add or don't add.
This patch adds a third option to replace an item record if a match is
found on itemnumber or barcode, else it adds the item.
Test Plan:
1) Stage a file of biblios with items attached.
2) Import the batch into the catalog.
3) Run the indexer so the matcher will match
4) Modify the item data for at least one bib in the file
5) Re-stage the file with the item matching option set to "Replace
items if matching bib was found"
6) Let the indexer run again
7) You should see updated item information after the overlay
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Henry Bankhead <hbankhead@losgatosca.gov>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
firstacquidate is now a mandatory field, so it must be set.
The updatedatabase process set firstacquidate value to one of:
- the planned date of the first serial for this subscription, or if not
found,
- the subscription start date.
+ auto-select the numbering pattern when modifying a subscription.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Serials numbering pattern and frequencies are no longer hard-coded. Now
it's possible to create, edit and delete numbering patterns (and
frequencies). This patch adds two new sql tables
(subscription_numberpatterns and subscription_frequencies)
Numbering patterns behave almost as before, there are still the same
values to configure (addX, everyX, settoX, whenmorethanX). lastvalueX
and innerloopX remain in subscription tables.
There is a new value in numbering patterns: numberingX. For each
"column" (X, Y or Z) you can tell how to format the number. Actually
numberingX can be set to:
- 'dayname' (name of the day) (0-6 or 1-7 depending on which day is the
first of the week)
- 'monthname' (name of the month) (0-11)
- 'season' (name of the season) (0-3) (0 is Spring)
These names are localized by using POSIX::setlocale and POSIX::strftime
and setting a 'locale' value to the subscription. Locale have to be
installed on the system.
Note that season names are not localized using POSIX::strftime (it can't
do this), so names are hardcoded into the code (available languages: en,
fr). This could be fixed in the future by using a Perl localization
framework.
Frequencies can be configured using 3 parameters:
- 'unit': one of 'day', 'week', 'month', 'year'
- 'issuesperunit': integer >= 1, the number of received issues per
'unit'
- 'unitsperissue': integer >= 1, the number of 'unit' between two
issues
One of 'issuesperunit' and 'unitsperissue' must be equal to 1.
Examples:
unit = 'day', issuesperunit=3, unitsperissue=1 => 3 issues per day
unit = 'week', issuesperunit=1, unitsperissue=3 => 1 issue each 3
weeks
Prediction pattern is now computed server-side and is more consistent
with what Koha will do. The publication date is displayed alongside the
serial number.
Irregularities can now be checked one by one, in the prediction pattern
table, or if frequency is 'day-based' (unit is 'day'), there is the
possibility to check all issues for a week day at once.
When an irregularity is found, there is the possibility to keep the
serial number unchanged, or to skip it. It is configured at subscription
creation or modification.
For instance, with a daily subscription you can have:
skip serial number | keep serial number
----------------------+----------------------
2012-01-01 ¦ No 1 | 2012-01-01 ¦ No 1
2012-01-03 ¦ No 3 | 2012-01-03 ¦ No 2
To lighten the subscription modification page, manual history has been
moved in its own page subscription-history.pl which is accessible on
subscription-detail.pl, tab 'Planning'.
Important note: updatedatabase.pl script takes into account existing
subscriptions and create appropriate numbering patterns for them (it
tries to create as few patterns as possible). Frequency is
mapped to the correct entry in subscription_frequencies table.
This patch includes kohastructure.sql and updatedatabase.pl changes
+ sample frequencies data and sample numberpatterns data for fresh
installs (sample data is included in updatedatabase.pl)
=== TEST PLAN: ===
Create a new subscription:
- Go to Serials module and click "New subscription" button
- On the first page, choose a biblio and click next to go to the
second page
- Pick a first issue publication date
- Choose frequency '1/day'
- Choose a subscription length of 15 issues
- Choose a subscription start date
- Choose numbering pattern 'Volume, Number'
- A table appears, fill 'Begins with' cells with '1'
- Click on 'Test prediction pattern' button
The prediction pattern is displayed at the right of the page. You can
see in it the serial number, the publication date and a checkbox to
allow you to choose which serials will not be received (irregularities).
You can see that serial number start from "Vol 1, No 1" continue to "Vol
1, No 12" and then restart with "Vol 2, No 1".
Frequency is '1/day' so you can see that publication date is incremented
by one day line after line.
- Now you can play a little with frequencies and numbering patterns,
change one of them (or both) and click again on 'Test prediction
pattern'
- For example, choose frequency '3/weeks' and click on 'Test
prediction pattern' button'.
There is a little behaviour change compared with current master.
Publication date will not be guessed within the week. Koha can't know
when you will receive issues. So the publication date stay the same
(monday of each week) for 3 consecutive issues and then jump to the next
week.
- Now choose frequency '1/3 months' and numbering pattern 'Seasonal'
- Fill 'Begins with' cells with '2012' for Year and '0' for Season
- Click on 'Test prediction pattern'
- You should have something like 'Spring 2012', 'Summer 2012', ...,
'Winter 2012', 'Spring 2013'
- Note that you can have seasons for south hemisphere by entering '2'
in 'Year/Inner counter'
- 2nd note: if you have some locales installed on your system, you can
type its name in the 'Locale' field (actually it does not work for
seasons name, only for month names and day names)
If you want to modify the numbering pattern you can still do it here:
- Click on 'Show/Hide advanced pattern' link. The advanced pattern
table is shown but all fields are readonly
- Click on 'Modify pattern' button. All readonly fields are now
editable. Note that 'Begins with' and 'Inner counter' line are
repeated here and any modifications in the small table will be
replicated in the big table, and vice versa.
- Pattern name is emptied, if you type a new name, a new pattern will
be created, and if you type the same name as an existing numbering
pattern, this one will be modified (with a confirmation message)
- There is two new lines in this table:
- Label: it's what is displayed in the smaller table headers above
- Numbering: used to format numbers in different ways. can be
'seasons', 'monthname' or 'dayname'. Month name and day name can be
localized using the 'Locale' field. Seasons can't (values for
English and french are hard-coded in Serials.pm)
- You can modify what you want in the table and click on 'Test
prediction pattern' button each time you want to see your
modifications. (Note that checkboxes for irregularities aren't displayed
in this mode, and you can't save the subscription until you have saved
or cancelled your changes).
- To cancel your modifications, just click on 'Cancel modifications'
button.
- To save them, click on 'Save as new pattern'. If the pattern name is
already existing, a confirmation box will ask you if you want to
modify the existing numbering pattern. Otherwise a new pattern will be
created and automatically selected.
Once you have finished modifying numbering pattern, you can click again
on 'Test prediction pattern' to define irregularities, and then click on
'Save subscription'.
Now you can check the serials module still works correctly:
- Check the subscription detail page to confirm that nothing is
missing. Especially the 'Frequency' and 'Number pattern' information.
- Try to receive some issues. Check that the serial number is correctly
generated and if irregularities you have defined are taken into
account (if you have defined some).
- Check that receiving is blocked once you have reached the number of
issues you have defined in subscription length (or once you have
reached the subscription end date)
In serials menu (to the left of almost each page of serials menu) you
have two new links: 'Manage frequencies' and 'Manage numbering
patterns'.
'Manage numbering patterns' lead to a page which list all numbering
patterns and allow you to create, edit or delete them. The interface is
almost the same as numbering pattern modification in subscription-add.pl
'Manage frequencies' lead to a page which list all frequencies and allow
you to create, edit or delete them.
Try to create a new frequency:
- Click on 'Manage frequencies' link in the serials menu and then click
on 'New frequency':
- Fill in the description (mandatory).
- Unit is one of 'day', 'week', 'month', year' or 'None' ('None' is for
an irregular subscription)
- If unit is different from 'None' you have to fill the two following
fields (Issues per unit, and Units per issue)
- Note that at least one of those must be equal to 1
- Issues per unit is the number of received issues by 'unit' and Units
per issue is the number of 'unit' between two issues
- Display order is used to build the drop-down list. Leave empty and it
will be set to 0 (top of the list)
- Then click on 'Save'
- Check that this new frequency appears in the frequencies table and in
the drop-down list in subscription-add.pl
Subscription history has been moved in its own page. To test if it still
works, choose a subscription with manual history enabled (or modify an
existing subscription to turn on manual history).
- On the detail page, tab 'Planning', you should have a link 'Edit history'.
- Click on it
- Modify history and click on Save
- In tab 'Summary' you should have the infos you just entered
And finally, you can check that old subscriptions (by old I mean
subscriptions that existed before the update) are correctly linked to an
existing numbering pattern and an existing frequency. Numbering patterns
should be named 'Backup pattern X' where X is a number.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Great development! Work as described. No koha-qa errors
(with all patches applied). Please QA this fast.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Squashed commits:
-----------------
Bug 7688 follow-up: Small fixes for QA
- # Subroutines::ProhibitExplicitReturnUndef: Got 1 violation(s) in
C4::Serials::GetSubscriptionIrregularities
- Bad template constructions fixed in serials/subscription-add.tt
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688 follow-up: Small fixes for QA #2
- "return undef" -> "return"
- ":utf8" -> ":encoding(UTF-8)"
- TAB -> SPACES
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Translate sample frequencies for french
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Fix generating next serial when there is no 'Expected' issue
It can happen when the Expected issue is claimed. In this case the
status of the last serial is 'Claimed'
This patch change the API of GetNextSeq and GetSeq
Test plan:
- Create a subscription which starts a long time ago so that serials
automatically appear in late issues
- Receive the first serial
- Go to claims page and claim the 2nd serial.
- Go back to the subscription page and click on 'Serial collection'
- You should have 2 serials, one 'Arrived' and one 'Claimed'.
- Click on Generate Next. This should fail with a software error message
("can't call method output ...")
- Apply this patch and click again on Generate Next. A new issue must be
created with status 'Expected'.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Followup FIX perldoc
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: David Noe <drnoe@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changes permission description in en and untranslated
installer files.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
biblioitems.serial is not a foreign key; it's a Boolean indicating
whether the biblio record is a serial, which in turn influences how
serial items are displayed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch modifies the logic to set the partial status for an
order to verify that:
- at least one item has been received already
- the order belongs to a closed basket
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
An order (o1) is considered as partially received if (at least) another
order (o2) has the o1.ordernumber == o2.parent_ordernumber and the
quantity received is < to the quantity (to receive) and o1.ordernumber
!= o1.parent_ordernumber.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch uses understandable codes instead of magical numbers for the
aqorders.orderstatus field.
+ execute sql queries in unit tests into a transaction.
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
You can now search orders by
- order status
- fund
The patch series also adds a new field, aqorders.orderstatus, which can
contain following values:
new
ordered
partial (for partially received orders)
complete
cancelled
To test: Search and check if results are consistent in histsearch.pl
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on last patch.
Note: status are no longer numeric, but strings now.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
- Install the specific language and run the web installer.
Or:
- Truncate or delete all from the itemtypes table in your database.
- Try to run the complete SQL in the itemtypes sample files.
Verify the table is filled correctly.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works for all languages. No koha-qa errors.
Tested removing itemtypes, then loading new file,
and checking on staff.
For de, es, nb, and pl no problems. For ru I disable foreign
keys constraint before TRUNCATE and reenable it afterwards.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new user permission for patron list management,
tools => manage_patron_lists.
This closes a security issue with the original patch series where
patron lists and their contents could be retrieved and modified
without requiring authentication of any sort.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The patron lists feature is somewhat similar to the record lists feature
in that it allows a librarian to create a list of patrons for later
retrieval and manipluation. These lists can then be used with the batch
patron modification tool.
Test Plan:
0) Apply the patch for Bug 8798
1) Apply this patch
2) Run updatedatabase.pl
3) Access the patron lists feature from Koha's Tools menu.
4) Create a new list via the "New patron list" button.
5) For this list, click the "Edit" button, and change the list name.
6) For this list, click the "Add patrons" button, and search for and
add some patrons to your list.
7) For this list select some patrons to remove them.
8) Try both adding some new patrons, and removing some old patrons
as a single action.
9) Click the "Patrons" link on the Koha toolbar
10) Search the patrons, or browse by letter to get patron results
11) Check the checkboxes next to one or more patrons, and add the
selected patrons to your existing list.
12) Change the "Selected patrons" pulldown to "All resultant patrons"
and add them to your list.
13) Check the checkboxes next to one or more patrons, and add the
selected patrons to a new list.
14) Try manipulating a list of patrons using the batch patron
modification tool.
15) Go back to the Patron Lists feature and delete your lists.
16) Run 'prove t/db_dependent/PatronLists.t'
Signed-off-by: Nora Blake <nblake@masslibsystem.org>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Enable patronimages
4) Verify patron images are still displaying correctly
5) Test deleting a patron image
6) Test adding a patron image from moremember.pl
7) Test adding a patron image from tools/picture-upload.pl
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- adjust description of the default profile
- adjust description of the sample data SQL
- adjust description of the download link
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
- Create a CSV profile (or use the default one) with a type 'sql'.
- Go to serials/claims.pl, select the wanted CSV profile and click on
the "Export selected items data".
- Verify the CSV file is correctly generated.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors
On top of 10853 (solving merge conflict)
Need to do homework to test. Add subscription and serial claim
notice.
1) Create a new CSV profile, type SQL, copy sample fields
2) Go to claims, select vendor
3) Go to Export selected items with created profile
4) CSV (in my case I use | as separator) download successfully
5) All fields present, file correct
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works as advertised, keeps existing format by porting it to
a SQL profile.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch:
- adds a new column 'type' to the export_format table.
- renames the field name export_format.marcfields with
export_format.content.
Test plan:
- Check that existing profiles have the type "marc" selected by default
- Create a new profile with a type "sql"
- Save and verify the profile is correctly displayed when you select it.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. koha-qa reports Small tabs errors,
corrected in followup
Test:
1) go to Tools > CSV profiles, Create profile, current
2) Apply patch, run updatedatabase
3) Go to Tools > CSV profiles, new option present
old profile with type MARC
4) Create new profile MARC, save and show correct
5) Create new profile SQL, save and show correct
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass with all 3 patches applied.
Works as described. Functionality for SQL profiles will be
added by another patch. For now it's possible to add/edit/delete
them.
Existing CSV profiles can still be exported correctly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds an HTML5-based offline mode to Koha's existing
circulation module, allowing librarians to check out items using a
basically familiar interface. The feature will be implemented using
the Application Cache and IndexedDB features of the HTML5 specification,
both of which are fully supported on Firefox 10+ and Chrome 23+, with
limited support going back to Firefox 4 and Chrome 11. The basic
workflow enabled by this patch is as follows:
Part 1: While connected to the Internet
1. Enable offline functionality by turning on the
"AllowOfflineCirculation" system preference.
2. Sync the offline circulation database on the computer that will be
used for offline circulation by following the "Offline circulation
interface" link on the Circulation home page, choosing "Synchronize (must be online)",
and clicking the "Download records" button. This process may take a while.
3. Bookmark /cgi-bin/koha/circ/offline.pl (the page you are currently
on) for easy access when offline.
Part 2: While disconnected from the Internet
4. Navigate to /cgi-bin/koha/circ/offline.pl using the bookmark you
created while online.
5. Start checking books in by scanning the barcode of an item that has
been returned into the box in the "Check in" tab.
6. Scan the barcodes of any additional items that have been returned.
7. Start checking out books to a patron by scanning the patron's barcode
in the box in the "Check out" tab.
8. Set a due date (the "Remember for session" box will be checked by
default, since circulation rules are not computed during offline
transactions and therefore a due date must be specified by the
librarian).
9. Scan an item barcode (if you did not set a due date, it will prompt
you) to check the item out to the patron.
10. If a patron has a fine you can see the total amount (current to when
the offline module was synced), and record a payment. Unlike when in
online mode, there will be no breakdown of what item(s) fines are
for, and you will only be able to record the payment amount and not
associate it with a particular item.
Part 3: While connected to the Internet
11. Click the "Synchronize" link and choose "Upload transactions" to
upload the transactions recorded during the offline circulation
session.
12. Navigate to /cgi-bin/koha/offline_circ/list.pl (there will be a
link from the Offline circulation page) and review the
transactions, as described in the documentation for the Firefox
Offline circulation plugin:
http://wiki.koha-community.org/wiki/Offline_circulation_firefox_plugin
RM note: the IndexedDB jQuery plugin bundled with this patch is
copyright 2012 by Parashuram Narasimhan and other contributors and is
licensed under the MIT license. The home page for the plugin is
http://nparashuram.com/jquery-indexeddb/.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Works very well, no koha-qa errors
Test with Firefox 24.0
1) did some checkouts pre sync
2) synchronize database (Download)
3) go offline
4) Proceed to checkin some items from patron
5) Proceed to checkout items to patrons, setting date
6) Proceed to checkout to expired patron, warning appears
7) go online
8) Upload records
9) go to review transacctions and proceed
10) verified on patrons that checkin/out are done
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch allows to define default values in the authorities framework.
Some code already existed but the feature did not work.
Test plan:
1/ Choose a framework, field and subfields.
2/ Define a default value.
3/ Create a new authority and check that the subfield is
automatically filled with the default value.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. koha-qa reports some tabs, fixed in followup
Test
1) Apply patch, run updatedatabase.pl
2) Edit auth framework, put default value someware, save
3) Add new auth, default value present
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Verified database update is done correctly.
Controlfields 0xx
- Edited an existing field (001)
- Set a default value for subfield @
- Edited subfield again, checking default was saved correctly
- Verified the default shows up correctly when creating a
new authority using this authority type
Fields
- Edited an existing field (100)
- Set a default value for subfield e
- Edited subfield again, checking default was saved correctly
- Verified the default shows up correctly when creating a
new authority using this authority type
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In OAI set mappings, the value "is equal to" is hardcoded. This
enhancement changes it to a dropdown menu to choose between "is equal
to" and "not equal to".
To test:
* define a set
* define a mapping for said set with "is equal to"
* run /misc/migration_tools/build_oai_sets.pl -r -v
* confirm that you have correct entries in SQL: select * from
oai_sets_biblios;
* change mapping to 'not equal to', save
* run /misc/migration_tools/build_oai_sets.pl -r -v
* confirm that you have correct entries in SQL: select * from
oai_sets_biblios;
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: Fix bug id in updatedb.pl
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The LC NAF and SAF authority Z39.50 database are indeed production
services, so we may as well showcase the new authority Z39.50 search
functionality.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- improve POD
- remove extraneous comments
- correct license statement in new files
- remove backticks in database update SQL
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch introduces a new Z39.50 interface for searching Z39.50
compliant databases for MARC authority records.
These databases aren't as common as their bibliographic equivalents,
but they're out there and very useful. I have included info at the
bottom of this messsage for sample authority databases you can try.
To test this patch:
1) Set up Z39.50 client targets for authority databases. (I've included
information at the bottom of this message for LibrariesAustralia's
test server for authorities as well as instructions on how to use
your Koha's z39.50 authority server as well. The Library of Congress
also has authority databases available (unsure if these are test or
prod), and you might have access to others through OCLC or RLIN. OCLC
provides login credentials for their test databases.
2) Go to the Authorities module
3) Click on the new "Z39.50 search button"
4) Select your authority search targets from the list.
5) Do a search for an authority you would like using either the "Raw"
input box or the more specific input boxes for names, subjects, subject
sub divisions, or titles. (I like searching Name (personal): Eric on
the LibrariesAustralia test DB.)
6) You should see a table listing the server, heading, authority type,
and two other columns (MARC and a nameless column). "Authority type"
is the type of authority it will become when imported in to Koha. In
the Eric example, "PERSO_NAME".
7) Click on "MARC" next to the results of interest to review the MARC
authority record.
8) When you're satisfied with a record, click on "Import".
9) The pop-up window will close and your original Koha window will
change to the "Adding authority Personal Name" screen (in the Eric
example).
10) All the relevant fields should be filled out for the record. Review
them and make any changes as necessary. (N.B. The 001 will be cleared
when saved, so if you have a use for the imported control number, move
it to the 010, 016, or 035 as appropriate. If you have a default value
for the 003, this will also likely be overwritten. Move it if necessary.
The 005 will also be updated when saved, so do not worry about that.)
11) When you're satisfied, click save.
12) Presto! You've imported your first authority record via Z39.50!
--
Here is the info for the LibrariesAustralia test Z39.50 authority
database:
Z39.50 server: LibrariesAustralia Authorities
Hostname: z3950-test.librariesaustralia.nla.gov.au
Port: 210
Database: AuthTraining
Userid: ANLEZ
Password: z39.50
Syntax: MARC21/USMARC
Encoding: utf8
-
The U.S.A. Library of Congress also provides Z39.50 access to its Name
and Subject Authorities (http://www.loc.gov/z3950/lcserver.html).
Name Authority:
Z39.50 server: Library of Congress Name Authority File
Hostname: lx2.loc.gov
Port: 210
Database: NAF
Syntax: MARC21/USMARC
Encoding: utf8
Subject Authority:
Z39.50 server: Library of Congress Subject Authority File
Hostname: lx2.loc.gov
Port: 210
Database: SAF
Syntax: MARC21/USMARC
Encoding: utf8
(N.B. Both of these databases also include title authorities.)
-
For testing purposes, you can also set up a Z39.50 client target,
which points at your own Koha instance's Z39.50 authority server.
To find the hostname, go to /etc/koha-conf.xml and find the value for
the <listen id="authorityserver"> element. Depending on your
configuration, this could be something like the following:
unix:/zebra/koha/var/run/zebradb/authoritysocket
(N.B. You might be using a different scheme than unix sockets...)
To find the database, scroll down to the bottom of koha-conf.xml until
you reach the <config> element. Within this, look for the value of the
element <authorityserver>. It should probably be "authorities".
To set up this Z39.50 client target in Koha...
Z39.50 server: my koha authorities
Hostname: unix:/zebra/koha/var/run/zebradb/authoritysocket
Port:
Database: authorities
Userid:
Password:
Syntax: MARC21/USMARC (or whichever flavour you need)
Encoding: utf8
Signed-off-by: Mason James <mtj@kohaaloha.com>
Bug 10096 [FOLLOW-UP] - Add a z39.50 interface for authority searching
This patch adds the "recordtype" column to the "z3950servers" table.
The value in this column (biblio or authority) then controls whether
the z3950 server shows up in a bibliographic search (through the
Acq and Cataloguing modules) or in an authority search (through
the Authorities module).
I also edited the z3950 management console to show this value
and allow users to edit it. The default value is "biblio", since
the vast majority of z3950 targets will be bibliographic. However,
there is an option to add/edit a z3950 target as a source of
authority records.
Test Plan:
1) Apply both patches
2) Run updatedatabase.pl (after setting your KOHA_CONF and PERL5
environmental variables)
3) Use the test plan from the 1st patch
N.B. Make sure that your Z39.50 client target has a Record Type
of Authority, otherwise it won't display when you're doing a
Z3950 search for authorities.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Bug 10096 [FOLLOW-UP] - fix tabs/whitespace errors to pass QA
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This is necessary because Bcrypt hashes are longer than MD5 hashes.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10513 added two columns to table itemtypes,
but sample_itemtypes can't be loaded because
it relies on old structure.
This patch rewrites sample_itemtypes.sql, stating
explicitly columns, removing backticks and consolidates
all in one insertion.
To test:
1) On master with current DB structure, delete item types
2) try loading sample_itemtyes.sql
It fails with "ERROR 1136 (21S01) at line 1: Column count doesn't match value count at row 1"
3) apply patch
4) try again, this time it will load and itemtypes created
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
SQL change only.
Tested by running the web installer on an empty database.
All sample data loads without errors.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch deletes information for default
MARC21 auth framework on tags 68a and 68b.
Also added update for current installs.
RM note: The 68a and 68b fields were defined in an attempt to include
both MARC21 classification and MARC21 authority records in the same
default framework, but I don't think this has turned out to be useful,
as to my knowledge nobody tries to use MARC21 classification records
in Koha, and if one were to want to, a distinct record type (or at
least auth_type) would be a better way to do it.
To test with current authorities_normal_marc21.sql loaded
1) apply the patch
2) run updatedatabase
3) check on database that there are no more
references to tags 68a and 68b
To test for new installs
1) remove auth frameworks
2) load authorities_normal_marc21.sql
3) check that load without problem
4) check on database that there are no more
references to tags 68a and 68b
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Db rev for new pref ConfirmFutureHolds.
Test plan:
Run [your server]/cgi-bin/koha/installer/install.pl?step=3&op=updatestructure
Optionally, run a new install to test sysprefs.sql.
Or:
Edit sysprefs.sql, leave at least the last few lines including the new one.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
With these patches we now have 3 preferences that deal with
fines/fees and lost items:
Replacement price
- On marking lost: WhenLostChargeReplacementFee
- On return: RefundLostItemFeeOnReturn (preexisting)
Overdue fines
- On marking lost: WhenLostForgiveFine
System preferences work according to their description.
Further notes:
- Patches pass all tests and QA script.
- LostItem is changed and needs unit tests.
All occurrences of LostItem have been changed.
- Database update is ok. I had to fix the sysprefs.sql
file that has been recently rewritten and alphabetized.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds functionality to forgive overdue fine when an item is
set to lost status. Fines are forgiven only when the syspref
WhenLostForgiveFine is set to yes. Item can be set to lost status from:
- catalogue/moredetail.pl
- cataloguing/additem.pl
- tools/batchMod.pl
- misc/cronjobs/longoverdue.pl
Changed subroutine C4::Circulation::LostItem to forgive fines on the
item depending on the value of syspref WhenLostForgiveFine. This
routine is currently used to return an item and charge a replacement
cost.
Also added a new syspref in C4::Circulation::LostItem -
WhenLostChargeReplacementFee. The replacement fee will now be charged
only if this syspref is set to yes. The default value of the
WhenLostChargeReplacementFee is yes, meaning that current behavior
will not change during upgrade.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Alex Hatley <alexh@cctexas.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch in series.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new column to item types. Text in this column is
displayed as a warning when an item of the given type is checked in.
The type of message can also be chosen, affecting how the message is
displayed.
Use case: Items that are on inter-library loan can have a separate
item type, and when items of this type are checked in a message
saying something like "ILL! Remember to return it to the owning
library!" can be displayed.
To test:
- Apply the patch
- Go to Home > Administration > Item types administration
- Check that there is a new column, called "Check in message"
- Edit an item type and add a check in message
- Check that the check in message you added is displayed in the table
- Check in an item with an item type that has a check in message
- Check that the message is displayed
- Repeat the steps above, but select "Alert" instead of the default
"Message" as the "Check in message type". Check that the message
is displayed in a yellow alert box, not a blue message box.
- Check in an item with an item type that does *not* have a check
in message, and make sure no false messages are displayed
- Create a new item type from scratch and check that it works
the way it is supposed to
- Run the tests in t/ItemType.t, which are updated by this patch
This patch also removes backticks around column names in the
itemtypes table in installer/data/mysql/kohastructure.sql
UPDATE 2013-07-22
- Rebased on current master (no changes)
- Added "AFTER summary" to the SQL statement in updatedatabase.pl
- Added another placeholder on line 170 of admin/itemtypes.pl
Thanks Katrin!
UPDATE 2013-07-29
- Make this message independent of all other messages - thanks Owen!
- Make it possible to choose the type of message ("alert" or
"message")
Sponsored-by: Kultur i Halland - Regionbibliotek
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed some tabs to make the QA script happy.
All old and new tests pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This allow to keep transfers informations without having untranslatable
strings in database.
Signed-off-by: sonia <koha@univ-lyon3.fr>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
On basket.pl and parcel.pl there is a 'Transfer' link which allow you to
transfer order lines from a basket to another.
The link leads to a new page which allow you to search for a bookseller,
then display this bookseller's baskets. Then you can pick a basket and
the transfer will be done.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: sonia <koha@univ-lyon3.fr>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Show any relevant results from the OverDrive ebook/audiobook service
on the OPAC search. This is done by showing a link with "Found xx
results in the library's OverDrive collection" at the top of search
results and linking to a page that shows the full results.
This requires an OverDrive developer account, and is enabled by
setting the OverDriveClientKey and OverDriveClientSecret
system preferences. In addition, this patch adds the
OverDriveLibraryID system preference.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Henry Bankhead <hbankhead@losgatosca.gov>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the wthdrawn field in items and deleteditems to be
withdrawn instead. No functional changes are made.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Save for translation files (that will be fixed on next release),
only occurrence of wthdrawn is on updatedatabase.pl
No koha-qa errors.
This touch many files, and I did not test everything,
but all seems normal. I think that any problem could
be fixed later.
Perhaps both entries in updatedatabase.pl could be joined
into one, but thats for QA.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This trivial patch set the default to 'yes' for this system preference.
To test,
On a clean install
- Navigate Home > Administration > Global System preferences > Logs
- AuthoritiesLog is set to "Don't log"
Apply the patch, install koha on a new DB.
- Navigate Home > Administration > Global System preferences > Logs
- AuthoritiesLog should be set to "Log"
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
One line patch, changing the default for new installations only.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
By sorting the sql syspref file, the frequency of merge conflicts
when dealing with it should be reduced.
Test plan:
- create a new DB with a new table named systempreferences (with the
same structure as the one you know).
- insert the current sysprefs.sql file into this table.
- note the number of rows in the systempreferences table.
- Create a dump of the system preferences, e.g.,
mysql> \T sysprefs-1
mysql> SELECT * FROM systempreferences ORDER BY variable;
mysql> exit
- apply this patch.
- delete all rows of the systempreferences table.
- insert the new sysprefs.sql file.
- verify the number of rows is the same as the previous.
- Create a new dump of the system preferences, e.g.,
mysql> \T sysprefs-2
mysql> SELECT * FROM systempreferences ORDER BY variable;
mysql> exit
- Verify that the two dumps (sysprefs-1 and sysprefs-2) are
identical.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Add db documentation to borrower_files table.
To test:
apply
review kohastructure.sql to be sure documentation is there
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: No errors. Tested loading on new database.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Add db documentation for the quotes table
To test:
apply patch
review kohastructure.sql to be sure documentation is there
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds db documentation to the biblioimages table.
To test:
Apply patch
Review kohastructure.sql to be sure that the documentation is there
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When issuing a book, some libraries want to issue by title or other details.
This patch adds a systempreference and code that allows it.
To test:
1) scan a patron card or enter a surname to start checking out;
2) enter title or other keywords;
3) the circulation screen should display a warning allowing to choose between copies.
Signed-off-by: MJ Ray <mjr@phonecoop.coop>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The department and term columns in the courses table started
as varchar(20), but since they refer to authorized values, need
to be varchar(80) to match authorised_values.authorised_value. This
patch increases the width of those columns.
To test:
[1] Create two DEPARTMENT authorised values, one whose code
is shorter than 20 characters and one whose code is longer
than 20 characters.
[2] Create two courses; give one course the short department and
the other the long department.
[3] Go to the courses list. Observe that the department column is
displays the department name only for the short course.
[4] Apply the patch.
[5] Edit the course with the long department and assign that long
department to it again.
[6] Go back to the courses list. Observe that both of the courses
now display their assigned department.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Verified changes are consistent for new installations
and updated installations.
Passes all tests.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a new system preference AllowTooManyOverride to control whether
a librarian can override the 'Too many checked out' message which is
currently always overridable.
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Attempt to check out 1 more item to a patron than the max issues
4) You should be allowed to override by default ( current behavior )
5) Set AllowTooManyOverride to "Don't allow"
6) Repeat step 3
7) You should be blocked from being able to issue the item
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The new system preference is activated by default, which mean there
will be no change in behaviour on update.
The system preference is correctly added to the database and .pref
files.
Test plan and QA script passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When overduefinescap was added to the issuingrules the datatype
given was decimal. This translates in MySQL to decimal(10,0).
This doesn't allow you to store decimal values and therefore
values like 4.5 are saved as 5 in the database.
To test:
On a current installation:
1) Try to enter 4.5 as Overdue fines cap. Verify that the value
is not correctly saved.
2) Apply patch and run database update.
3) Try adding/changing an issuing rule setting Overdue fines cap
to 4.5 again.
4) Verify the value is saved correctly.
Create a new Koha installation from scratch:
1) Verify that the issuingrules table has been created correctly
and that you can add/mofidy issuingrules correctly.
Because this bug can create data loss, the old database update
has also been changed to avoid this problem for people updating
at a later point in time. Checkout an older version of Koha
pre 3.09.00.027.
1) Run the database updates.
2) Verify again, that adding/modifying issuingrules works correctly.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes a bug that prevented the circulate/overdues_report
permission from being assigned to staff users during upgrade. This
patch will not affect databases that are already running 3.12.x
or later.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This will only fix the permissions for updates done
after the patch has been applied. But I agree with
Fridolyn, that we can not safely update permissions for
existing installations.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Changes 8 INSERTs into INSERT IGNOREs.
This allows current installs to benefit easier from the new tags/subfields.
Note that running with --force will not achieve the same! The multi-value
inserts will still be aborted, though execution continues.
Test plan:
Run the file or do a new install.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Ran the file on a current install manually.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Applies to new installs, although with the follow-up
patch, users can run the installer/data/mysql/en/marcflavour/marc21/mandatory/marc21_framework_DEFAULT.sql
script through the mysql client to add new tag and
subfield entries.
To test:
1) Delete MARC21 default framework
2) Apply patch
3) Test that new default framework loads without problem
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Run this file with and without this patch.
This patch adds 24 tags (338 vs 314) and 323 subfields (3951 vs 3628).
Verified that last QA comments were incorporated.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
'ind' rather than 'ita' was set as the ISO639-2 language
code for Italian in the fr-FR, it-IT, pl-PL, ru-RU, and uk-UA
installation SQL.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I checked nb-NO and de-DE - language code there had already
been corrected.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some vendors ship materials from the same invoice in multiple packages.
In those cases, it would be good to notify the librarian when they enter
a duplicate invoice number, so that they can continue receiving on the
previously-created invoice, rather than creating an invoice with a
duplicate number.
To test:
1) Apply patch and run database update.
2) Make sure that you have created at least one invoice on
acqui/parcels.pl and take note of the invoice number.
3) Try to create an invoice with the same invoice number.
4) Note that without changing your configuration this works exactly
the same as before.
5) Turn on the AcqWarnOnDuplicateInvoice system preference.
6) Try to create a new invoice with the same number as the one you
noted earlier.
7) Make sure you get a warning about a duplicate invoice.
8) Choose to receive on the existing invoice.
9) Confirm that you are receiving on said existing invoice.
10) Start the receiving process over, and this time choose "Create new
invoice anyway."
11) Confirm that you are now receiving on a new invoice.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
I have followed the test plan, but also checked some more things:
- Checking the duplicate check works when you have the entered
invoice number in your database multiple times already.
- Checking that no duplicate message is shown if you enter the
invoice number and it's already been used for an invoice from
another vendor.
Looks all good. I think the only thing we could argue about here
is if this could be activated by default for new installations.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This translates 2 strings missed doing the initial translation in
ISSUESLIP.
To test:
- Run the web installer in German.
Altnernatively:
- Truncate your letters table and run the SQL against the database.
Check that the notices were added correctly, especially ISSUESLIP.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Instead of inserting followed by deleting, this patch combines the two where
clauses of both sql statements, meanwhile leaving the separation intact.
As suggested by Galen, removed all 162's from the non-default types.
The 162 calls for a new authority type. We can add that later on.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Ran this .sql script after deleting all auth records.
The former version had 9 types, 1148 tags and 11621 subfields.
This one has 9 types, 1140 tags and 11597 subfields.
That is expected: 8 tags 162 less and 8x3 subfields less.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
As proposed by the report creator, this patch
rewites authorities_normal_marc21.sql
using default authority framework to build all
current authtypes, then deleting irrelevant tags.
It also updates default authority framework
to last update (April 2013) adding new or
updated tags/subtags.
All new tags/subtags from Bug 9826 and this
one are included in all authtypes.
Deleted tags reflect current situation except
for 7XX tags thatl must be present for all authtypes.
Only for new installs
To test:
1) Apply patch
2) Delete all authtypes
exec in database
delete from auth_types;
delete from auth_tag_structure;
delete from auth_subfield_structure;
3) Insert new auth framework
4) Verify absent tags. This can be done running
select tagfield as from auth_tag_structure
where authtypecode ='' and tagfield not in
(select tagfield from auth_tag_structure
where authtypecode = 'AUTH_TYPE')
for each authtype ( UNIF_TITLE, TOPIC_TERM, etc.)
The attached PDF could be used as a reference,
all that is white or green for each authtype must be
in the list (except for white 7XX tags)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The DB field aqorders.biblioitemnumber seems to be unused except to get
the itype on the spent.pl page.
This information can be retrieved uising another SQL join.
Test plan:
Try a complete workflow in the acquisition module: create an order,
receive it, play with the syspref AcqCreateItem.
Check that no regression is found and that the data for existing
orders don't change.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
An insert statement should contain the column names to avoid confusion and
future problems with table definition changes.
This patch updates the English userflags.sql.
Will send updates for the other languages in connection with replacing inserts
by updates for the additional languages (where possible). For userflags this
will be possible.
Test plan:
Do an install (English).
Or -- as a dangerous(!) alternative--:
Do this ONLY on a restorable database.
Delete all records in userflags. (Note: This cascades to permissions a.o.)
Run this file from command line.
Check if you have records again in userflags. (You also messed up your Koha.)
Restore your database.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested both ways myself :)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No errors.
Tested using second alternative
Just a note: if you update other lang files replacing INSERTs for UPDATEs
then you must install using EN and later apply lang files by hand.
If you do a translate first before webinstaller, and finish your install
in your lang, then that kind of file will fail.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
mysql> create database test;
Query OK, 1 row affected (0.00 sec)
% mysql -u koha -p test < installer/data/mysql/kohastructure.sql
% mysql -u koha -p test < installer/data/mysql/en/mandatory/userflags.sql
mysql> select count(*) from userflags;
+----------+
| count(*) |
+----------+
| 19 |
+----------+
1 row in set (0.00 sec)
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates MARC21 authority framework adding
missing tags/subtags up to Update No. 15 (September 2012)
Missing tags and corresponding subtags only added to
default authority framework.
For present authtypes only missing subtags are added.
Also updates a few legends to match those from LOC.
No deletions except for a few not relevant tags in
present authtypes without subfields.
Only to new installs.
To test:
1) Delete present authority frameworks
2) Load new frameworks. On default there are
many new tags/subtags. On present authtypes
only a few new/renamed subtags.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This schema update ensures that the borrower_files table
will exist for libraries who first installed Koha at
3.10.x.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
As a consequence, the borrower_files table would not exist
in Koha databases that were installed starting at 3.10.0
or later.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Renames the pref for install and upgrade.
Test plan: See the other patch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
On by default.
To Test
1/ Create an overdue item, that should get fines
2/ Return the item
3/ Check the borrowers record to see if the fine has been added/updated
Apply patch
1/ Make sure preference is set to do
Repeat steps 1-3 above
2/ Switch the preference to don't
Repeat stes 1-2
3/ Check the fine hasn't been added/updated
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass, works as described.
I would categorize this a bug fix for libraries that don't want
the new changed behaviour that was introduced by recalculating
fines on return.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Report 10052 makes the intranetstylesheet prefs behave like the opac ones.
This patch contains an optional db revision: If the pref intranetstylesheet is
not blank, and does not start with http, https or /, then prefix it with a
slash to make it an absolute path.
Test plan:
Before applying this patch:
1) Put intranet-tmpl/prog/en/css/staff-global.css into intranetstylesheet.
This works in the current staff client, but will be interpreted as relative as
soon as both patches for this report have been applied.
Apply the patch. And run: /cgi-bin/koha/installer/install.pl?step=3&op=updatestructure
Check the webinstaller warning and the pref value. There should be a slash
in front now. The css should still work.
Continue after applying this patch with:
2) Clear the intranetstylesheet pref. Run updatestructure again. No message: OK
3) Put /intranet-tmpl/prog/en/css/staff-global.css in intranetstylesheet.
Run updatestructure again. No message: OK
4) Prefix intranetstylesheet with http://[your-server-here]. Test again.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on last patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Database revision for report 9722, adding new pref OpacShowHoldNotes.
This development is part of a larger one (see umbrella report 9721).
Test plan:
Run [your server]/cgi-bin/koha/installer/install.pl?step=3&op=updatestructure
Optionally, run a new install to test sysprefs.sql.
Or:
Edit sysprefs.sql, leave at least the last few lines including the new one.
And run from command line: mysql -p [yourdatabase] < [your-clone]/installer/data/mysql/sysprefs.sql
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Remove the column 'itemnumber' from the table 'serial'. This is
a 1 to many relationship, and this reference does not make sense.
The 'serialitems' table handles the relationship between the 'items'
table and the 'serial' table.
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Verify serial.itemnumber has been removed from the database
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Column removed. No errors.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Enable IndependantBranches
2) Apply this patch
3) Run updatedatabase.pl
4) Verify that the system preference still functions correctly
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
Currently, new installs are created with XSLT display set to "off",
but XSLT seems to be the preferred way to display records, so
having the default be "on" instead seems to make sense. This patch
will of course only affect new installs.
To test:
- Apply the patch
- Run through the webinstaller on an empty database
- Log in to the staff client and search for "xslt" in system
preferences
- Verify that XSLTDetailsDisplay, XSLTResultsDisplay,
OPACXSLTDetailsDisplay and OPACXSLTResultsDisplay are all set to
"default"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passes test plan correctly.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changes syspref.sql for new installations to use XSLT views
by default. No changes to existing installations, no
string changes.
Passes all tests.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Some table columns should have an index to speed SQL queries :
- statistics table has only one index (used to make heavy queries for reports)
- itemtype should have an index in items and biblioitems (this is used in circulation to check the number of existing issues of a specific item type)
- issue.branchcode and issue.issuingbranch
Test plan :
- Create a new database using kohastructure.pl
=> check there is no SQL error and that new indexes are present (mysql> show create table)
Apply update database on a master version
=> check there is no SQL error and that new indexes are present (mysql> show create table)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Indexes created as described. No errors.
Fixing small merge conflict.
Test presence of new indexes on all affected tables.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
SQL only changes fixing an important database update.
IMPORTANT: Patches must be backported to all versions containing
the database update 3.09.00.025.
I used the test plan provided by Julian with some additions:
1/ Do a fresh 3.8 install
2/ Do some reserves
3/ Check your old_reserves table is empty
4/ Update your sources to 3.10
5/ Run updatedatabase.pl
6/ Your reserves table is now empty!
I made sure I had item level and title level holds, also
suspended holds.
I repeated the test with entries in my old_reserves table
(cancelled and filled holds) to make sure this is also still
working correctly.
Before the patch we lost all suspended holds and when the
old_reserves table was empty also all holds in general.
After the patch the reserve_id is added but the other data
in both tables is not altered.
NOTE: Adding the reserve_id first to old_reserves and then
to reserves we are missing one id in between.
old_reserves: 1,2,3
reserves: 5,6
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
It can remove all reserves from reserves table when there is no entries
in old_reserves.
This is due to @ai which is set to NULL in
SET @ai = ( SELECT MAX( reserve_id ) FROM tmp_reserves )
and reserve_id > NULL returns no results in
INSERT INTO reserves SELECT * FROM tmp_reserves WHERE reserve_id > @ai
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test plan and comments on second patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch does several things:
- Set the default for 008/15-17 to "no " (yes, there is space at the end)
- Link from 008/15-17 in the value builder to NORMARC country codes
- Set the default for 008/35-37 to "nor" (by setting the
DefaultLanguageField008 syspref)
- Link from 008/35-37 in the value builder to NORMARC language codes
- Fix a missing <tr> around field 35-37
To reproduce:
- Run through the Web-installer in Norwegian and choose NORMARC as
the MARC flavour
- Go to Home > Cataloging > Add MARC record and add a new record
- Click in the field for 008. The default should look like:
130415t xxu||||| |||| 00| 0 eng d
^^^ ^^^
- Reload the page and open the value builder for 008. Problems:
- The text for 15-17 links to MARC21 country codes
- The default for 15-17 is xxu
- The text for 35-37 links to MARC21 language codes
- The default for 35-37 is eng
- If you choose e.g. "Monografier" in the top dropdown then click
on "OK" the window does not close
To test:
- Apply the patch and run through the Web-installer again, selecting
Norwegian and NORMARC
- Go to Home > Cataloging > Add MARC record and add a new record
- Click in the field for 008. The default should look like:
130415t no ||||| |||| 00| 0 nor d
^^^ ^^^
- Reload the page and open the value builder for 008.
- Check that...
- The default for 15-17 is "no " (with a space at the end)
- The link goes to NORMARC country codes
- The default for 35-37 is "nor"
- The link goes to NORMARC language codes
- Select something from the top dropdown and click "OK". Check that the
window closes and that the values that are entered into the 008 field
matches what you chose in the popup window.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Trusing Magnus is right, so testing for any regressions mainly, all good
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Only changes NORMARC specific plugin and system preferences
files. Changes all seem logical to me.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Increase both on staff and OPAC interface
from 80 to 255 characters to be saved in
the database. Shown will be 80 characters.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Clean patch, workes as described.
To test:
- Apply patch and run database update
- Check that the column in the database is now varchar(255)
- Enter a new suggestion in the OPAC
- Edit this suggestion in staff
- Confirm form has the new max value set
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Bug 7892 introduced UniqueItemFields but did not add it to sysprefs.sql.
Also fixes an unrelated missing semicolon in sysprefs.sql
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
2d version, Correcting a typo
In French UNIMARC mandatory installer, some authorised values for languages, countries and unimarc function codes are wrong.
A lot of unimarc function codes and language codes are missing.
Reference for country codes is ISO 3166-1 standard
Reference for language codes is ISO 632-2 standard
Reference for Unimarc function codes are Unimarc Manual (french version online in BNF website and ABES website)
This patch correct wrong values and add new ones.
For the moment I keep some wrong codes, because they may be used by some librairies :
- language codes deu, lan, mla, sam
- function codes 571, 573, 574, 575
To test :
1) take a fresh new koha
2) apply patch
3) install Koha, choosing French UNIMARC settings
4) look if values are OK in authorised values and if you can use them in cataloguing module
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
SQL change only, French installer installs authorised values
without problems.
Note: There is a problem loading sample labels unrelated to this
patch:
sample_labels.sql
ERROR 1146 (42S02) at line 3: Table 'koha.labels_templates' doesn't exist
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Activate German and English for OPAC and intranet by default.
To test:
- Run the German web installer
- Check that when logging into Koha the German interface is shown
and you can switch between English and German using the links
at the bottom of the page
- Check language relevant settings in the system preferences
are correctly set
Note: The German po files in master are buggy, please
use files from translate.koha-community.org for testing.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch updates the German web installer files from the
optional directory.
This includes:
- Adding the bridge/reference.gif to the REF itemtype
- Updating currency rates and setting EUR to active
- Adding branchcode MPL to the sample holidays
- Updating a few strings on the patroncard samples
- Fixing typos and rephrasing
To test:
- Run the web installer with German installed
- Verify all optional SQL files are installed correctly
Note: The German po files in master are buggy, please
use files from translate.koha-community.org for testing.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch updates the German web installer files from the
mandatory directory.
This includes:
- CalendarFirstDayOfWeek defaults to Monday
- gist rates default to 0.07|0.19|0.00
- RoutlingListNote default text translation
- uniqueitemfields default set to barcode stocknumber
- Translation of new user flags and permissions
- Corrections to existing translations and typo corrections
To test:
- Run the web installer with German installed
- Verify all mandatory SQL files are installed correctly
Note: The German po files in master are buggy, please
use files from translate.koha-community.org for testing.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Moving use Output.pm to optional require.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Bug 6554 patched output_html_with_http_headers to encode utf8 data, and Templates.pm to expect utf8 data to be encoded.
The Installer page login screen outputs directly to STDOUT (InstallAuthAuth.pm does, WHICH IS WRONG!) and wasn't fixed to do the encoding first.
This patch makes it use output_html_with_http_headers and solves the problem.
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Some letters were missing or not translated in the German and
Norwegian data for the webinstaller. This patch adds them.
German
- RENEWAL (present, but not translated)
- OPAC_REG_VERIFY (missing)
Norwegian
- RENEWAL (present, but not translated)
- ISSUESLIP (missing)
- ISSUEQSLIP (missing)
- RESERVESLIP (missing)
- TRANSFERSLIP (missing)
- OPAC_REG_VERIFY (missing)
To test:
- Install Norwegian and German* translations
- Run through the web installer in German, making sure that
the sample letters are selected
- Check that there are no errors in the web installer
- Check <intranet>/cgi-bin/koha/tools/letter.pl - that the
letters look OK, and are translated
- Repeat the process for Norwegian
* = I had some problems with installing the German
translations that are in master, but now I can't reproduce
it. If you run into a problem where only some of the
subdirectories of koha-tmpl/intranet-tmpl/prog/de-DE/modules/
are cerated, try downloading and installing the 3.10 .po
files from Pootle.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Sorry, this followup fulfills K. Fischer request to
base de-DE file in english one.
The differences are small corrections and added languages.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Rebased to master
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This followup adds Catalan language into languages
other than english.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Rebased to master
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Simply add catalan language.
No translation yet, so can't be really tested.
But it will come soon.
Until then, to test:
1) cp misc/translator/po/es-ES* to ca-ES*
2) do perl translate install ca-ES,
3) apply the patch
4) run updatedatabase.pl
5) enable language and display on system preferences.
6) check labels
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Rebased to current master
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Small followup to update servers. No errors
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch
- Updates the sample servers installed by the web installer
- Does a database upgrade that changes the encoding for the servers
in question
To test:
- Do a Norwegian installation and make sure to choose the optional
sample Z39.50 targets
- Check that encodings for the Norwegian targets (BIBSYS, SAMBOK,
NORBOK and DEICHMAN) are all set to ISO_6937 (which is the wrong
encoding)
- Apply this patch and make sure updatadatabase.pl is run
- Check that the encoding for the four targets mentioned above are
now ISO_8859-1
- Do one search against each target and check that there are no
"strange" chars in the result list. Searching each of the targets
for "hessen" should give results that include "norwegian vowels"
- Log on to the MySQL of the test installation and empty the table
of Z39.50 targets:
mysql> delete from z3950servers;
- Load this file into MySQL from the command line:
installer/data/mysql/nb-NO/2-Valgfritt/z3950servers.sql
and check that it loads without errors and that the four
Norwegian targets are still set to have encoding = ISO_8859-1
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No errors.
No koha-qa errors
Passed-QA-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch fixes the file of authorized values that is used when
the web installer is run in Norwegian:
Not translated: BOR_NOTES
Missing: REPORT_GROUP
To test:
- Install the Norwegian translation
- Run through the web installer in Norwegian
- Make sure the auth_val.sql file is included
- Check that there are no errors in the web installer
- Check that the BOR_NOTES and REPORT_GROUPS values are present
in Home > Administration > Authorized values
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
I can't test the validity of the translation, but it doesn't break
anything :)
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
SQL and NORMARC only, works alright.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This (large) patch adds spanish translation to default
MARC21 bibliographic frameworks.
Based on final EN default framework of Bug 5858,
strings from http://www.bne.es/es/Micrositios/Guias/Marc21/index.html
Automated substitution of strings, to change as
little as possible the original file and ensure
that no entry is removed.
Only to new installs.
To test
1) Delete default framework.
2) Load installer/data/mysql/es-ES/marcflavour/marc21/mandatory/marc21_framework_DEFAULT.sql
into database. Must load without errors.
3) Edit a record y choose default framework, legends must be in spanish
(save for obsoleted fields, left untranslated on pourpose)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
SQL changes only.
Dropped my database and ran the Spanish web installer with
all sample files. No errors and frameworks in Koha look fine.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To test:
(this is best done by someone who has a database with translated
strings for user permissions - I'm looking towards Katrin. :))
Get a 3.6-3.8 era database loaded as test data - also please use
a low value test database.
Translate or change the strings in the database for the user
permissions that follow in mysql client (for those who didn't
install with a different language that has translated files
at install time) -
update userflags set flagdesc="Translated text 1" where flag
IN('catalogue','editauthorities','reports','management','serials',
'updatecharges','circulate','parameters','borrowers','tools',
'staffaccess','edit_patrons');
(you will notice that this changes all of the permission labels
in the interface to "translated text 1" for the affected
permission flags. This is why I don't want you to use a high
value test database.)
Update that to master + this patch - your "translations"
should be intact.
Blow that database away, and make a brand new one 3.6-3.8 era
with the english database definitions. Run the update again with
this patch, the strings should be updated correctly.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
There was a typo in the patch, the first database update had to be
changed from this: $dbh->do{(q{ to this: $dbh->do(q{
* Test 1:
- git checkout v3.06.05
- Run through the web installer in Norwegian, installing all
Norwegian sample data
- git checkout <master + patch for bug 9745>
- Run web installer/upgrade
- Almost all of the permissions are still in Norwegian. The ones
that are in English are not touched by the database update for
3.11.00.016, so they must have been introduced by other updates.
* Test 2:
- git checkout v3.06.05
- Run through the web installer in English, installing all English
sample data
- git checkout <master + patch for bug 9745>
- Run web installer/upgrade
- All permissions have been updated as expected, except "Perform
batch modification of patrons" which is not in the 'userflags'
table, but in the 'permissions' table. I have amended the patch
to account for this.
Two fixes to the original patch, please give a shout if this
makes a second signoff necessary!
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I tested this on an English and a German sample base updating
from 3.06.07 successfully.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Corrected incorrect field names in the last query (it's
permissions.description not permissions.flagdesc).
This reverts commit 60508cb03d, reversing
changes made to 8579d07f14.
The patches for bug 7688 caused a failure in t/db_dependent/Serials.t:
not ok 8 - test getting history from sub-scription
Conflicts:
installer/data/mysql/kohastructure.sql
installer/data/mysql/updatedatabase.pl
kohaversion.pl
