Bug 15527 add an xslt dir, LangInstaller.pm must ingnore that dir.
To test:
1) Verify the problem on current master
Update translation for any lang, will see errors
2) Apply the patch
3) Update again, no errors
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Works as expected.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The other attachment was not a patch which could be applied by
'git bz'. This corrects that.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
debian/update-control will need to be run after this is applied, but
it works well
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
From commit 581759e985
Bug 14133: Print notices should be generated with the print
template
"""
IMPORTANT NOTE: This test plan does not take into account the notices
generated for the staff ("These messages were not sent directly to the
patrons."). However the behavior will also change, the print template
will be used in all cases. Is it what we want?
"""
Yes, it is what we want. But if the print template does not exist, the
notice is not generated, we'd like to get the email template instead.
Test plan:
- Remove the print template for the letter you use for overdues
- Define an overdue rule to send an email
- Remove the email address for the patron which has overdues
- Execute the overdue_notices script
The staff should get an email notice and a print notice (using the
email template) should be generated for the patron
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Regression introduced by bug 14133, see but 14133 comment 13.
Test plan:
Without this patch applied, if a patron cannot be notified (no email
address or sms number), the print notice generated for the library was
not.
With this patch applied, the print notice should be generated using the
print template
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Koha's EDIFACT module works great for many European vendors,
but does not work will for US vendors, which have a much different
interpretation of 'standard'. In fact, each vendor may require
different arrangements of values in EDIFACT messages. It would be
impossible to encompass all these requirements within Koha's EDIFACT
module itself. Instead, we should allow the module to be pluggable, so
versions of the module can be developed for vendors that require EDIFACT
messages that don't conform to the standard set by Koha's EDIFACT
module.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) Enable Koha plugins
4) Install the Edifact stub plugin available at
https://github.com/bywatersolutions/koha-plugin-edifact-stub
5) Edit the EDI Vendor account, assign the plugin to a Vendor EDI account
6) Test EDI functionality ( ORDER, INVOICE ), there should be no errors
or changes to the EDIFACT message input or output
Signed-off-by: Jason DeShaw <JDeShaw@cityoffargo.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Bug 9006 changed the api for retrieving config values
from C4::Context after the removal of Autoload
This changes the syntax used to retrieve logdir to reflect
the correct syntax
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Modification in Acquisition.t to support in test the new fields
of the table aqorders:
line_item_id, suppliers_reference_number,
suppliers_reference_qualifier, suppliers_report
Original patch by Zeno Tajoli
I amended to include the report field (ColinC)
Signed-off-by: Paul Johnson <p.johnson@staffs.ac.uk>
Signed-off-by: Sally Healey <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Add support for processing incoming Edifact Quotes, Invoices
and order responses and generating and transmission of
Edifact Orders.
Basic workflow is that an incoming quote generates an aquisition
basket in Koha, with each line corresponding to an order record
The user can then generate an edifact order from this (or another)
basket, which is transferred to the vendor's site
The supplier generates an invoice on despatch and this will
result in corresponding invoices being generated in Koha
The orderlines on the invoice are receipted automatically.
We also support order response messages. This may include
simple order acknowledgements, supplier reports/amendments
on availability. Cancellation messages cause the koha order
to be cancelled, other messages are recorded against the order
Which messages are to be supported/processed is specifiable on a
vendor by vendor basis via the admin screens
You can also specify auto order i.e. to generate orders from quotes
without user intervention - This reflects existing
workflows where most work is done on the suppliers website
then generating a dummy quote
Received messages are stored in the edifact_messages table
and the original can be viewed via the online
Database changes are in installer/data/mysql/atomicchanges/edifact.sql
Note new perl dependencies:
Net::SFTP:Foreign
Text::Unidecode
Signed-off-by: Paul Johnson <p.johnson@staffs.ac.uk>
Signed-off-by: Sally Healey <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Rename not_borrowered_since to not_borrowed_since
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
- check print icon on the patron list summary page is correct
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This follow-up patch for Bug 10612 moves all list operations into one
menu while (hopefully) clarifying the labels for each.
Also in this patch: Changed datatables sorting configuration to use the
"nosort" attribute.
To test, apply the patch and go to Tools -> Patron lists.
- On a patron list with no patrons, confirm that the "Actions"
menu lists "Add patrons," "Edit list," and "Delete list."
- On a patron list containing one or more patrons, confirm that the
"Actions" menu /also/ has these options: "Print patron cards," "Batch
edit patrons," and "Batch delete patrons."
- Confirm that the "actions" column is not sortable.
- Test logging in as a user who has various combinations of permission
to batch edit and batch delete.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch adds the ability to select a patron list for deletetion
when using the Batch patron deletion/anonymization tool. It also adds
buttons to the the patron lists table to access both the batch deletion
and batch modification directly from the lists view.
This is a squash of previous patches but now adds a patron_list_id
parameter to C4::Members::GetBorrowersToExpunge and uses that routine to
fetch patrons from a list.
Test Plan:
1) Apply this patch
2) Create a list of patrons with the new Patron Lists feature
3) Try using the batch edit link form the lists table
4) Try using the batch delete link from the lists table
5) Verify previous functionality has not changed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Patron batches are correctly passed to the edit and delete pages.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Run Koha QA Test tools and discovered this failed because of tabs.
Rather than fail this and wait forever for it to get fixed, this
patches it, and I'll mark it as signed off anyways.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Test Plan (remains the same):
0) Back up your database
1) Apply all these patches
2) In your mysql client use your Koha database and execute:
> DELETE FROM systempreferences;
> SOURCE ~/kohaclone/installer/data/mysql/sysprefs.sql;
-- Should be no errors.
> SELECT * FROM systempreferences LIKE 'GoogleO%';
-- Should see 4 entries.
> QUIT;
3) Restore your database
4) Run ./installer/data/mysql/updatedatabase.pl;
5) In your mysql client use your Koha database and execute:
> SELECT * FROM systempreferences LIKE 'GoogleO%';
-- Should see the same 4 entries.
6) Log into the staff client
7) Home -> Koha administration -> Global system preferences
8) -> OPAC
-- make sure your OPACBaseURL is set (e.g. https://opac.koha.ca)
9) -> Administration
-- There should be a 'Google OAuth2' section with the ability
to set those 4 system preferences.
10) In a new tab, go to https://console.developers.google.com/project
11) Click 'Create Project'
12) Type in a project name that won't freak users out, like your
library name (e.g. South Pole Library).
13) Click the 'Create' button.
14) Click the 'APIs & auth' in the left frame.
15) Click 'Credentials'
16) Click 'Create new Client ID'
17) Select 'Web application' and click 'Configure consent screen'.
18) Select the Email Address.
19) Put it a meaningful string into the Product Name
(e.g. South Pole Library Authentication)
20) Fill in the other fields as desired (or not)
21) Click 'Save'
22) Change the 'AUTHORIZED JAVASCRIPT ORIGINS' to your OPACBaseURL.
(http://library.yourDNS.org)
23) Change the 'AUTHORIZED REDIRECT URIS' to point to the new
googleoauth2 script
(http://library.yourDNS.org/cgi-bin/koha/svc/auth/googleopenidconnect)
24) Click 'Create Client ID'
25) Copy and paste the 'CLIENT ID' into the GoogleOAuth2ClientID
system preference.
26) Copy and paste the 'CLIENT SECRET' into the GoogleOAuth2ClientSecret
system preference.
27) Change the GoogleOpenIDConnect preference to 'Use'.
28) Click 'Save all Administration preferences'
29) In the OPAC, click 'Log in to your account'.
-- You should get a confirmation request, if you are
already logged in, OR a login screen if you are not.
-- You need to have the primary email address set to one
authenticated by Google in order to log in.
30) Run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To test
1/ Apply both patches
2/ This patch lets you easily configure mappings for categorycode values.
These mapping will be used when updating the user's account after a successful LDAP login.
Here is an example configuration :
<config>
<ldapserver id="ldapserver>
<mapping>
<categorycode is="usertype">STU</categorycode>
...
</mapping>
<categorycode_mapping>
<categorycode value="STU">STUDENT</categorycode>
<categorycode value="EMP">EMPLOYEE</categorycode>
</categorycode_mapping>
</ldapserver>
</config>
3/ With this configuration, LDAP users with the usertype value "EMP" on the LDAP server should have the "EMPLOYEE" categorycode in Koha.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To test
1/ Apply both patches
2/ This patch lets you easily configure mappings for categorycode values.
These mapping will be used when updating the user's account after a successful LDAP login.
Here is an example configuration :
<config>
<ldapserver id="ldapserver>
<mapping>
<categorycode is="usertype">STU</categorycode>
...
</mapping>
<categorycode_mapping>
<categorycode value="STU">STUDENT</categorycode>
<categorycode value="EMP">EMPLOYEE</categorycode>
</categorycode_mapping>
</ldapserver>
</config>
3/ With this configuration, LDAP users with the usertype value "EMP" on the LDAP server should have the "EMPLOYEE" categorycode in Koha.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
These prefs do not need to be cached, a quick access to $ENV permit to
get the value.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch makes db_structure.t more flexible regarding how many tests are run.
This is important because it would fail on each db structure change, masking potential
real problems.
To test:
- Run
$ prove t/db_dependent/db_structure.t
=> FAIL: the number of tests ran doesn't match what is expected
- Apply the patch
- Run
$ prove t/db_dependent/db_structure.t
=> SUCCESS: Tests count is not an issue [1]
- Sign off
[1] Right now the tests run successfuly, they might fail if a real bug is introduced
on the DB structure, in the meantime.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
TEST PLAN
---------
1) prove t/db_dependent/Reports_Guided.t
-- fails
-- note the failure has a scalar function-like bracketing
2) apply patch
3) prove t/db_dependent/Reports_Guided.t
-- passes
4) git diff origin/master
-- note all scalars have been changed to not have
function-like brackets which could be incorrectly
parsed.
5) run koha qa test tools
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Also fixes ! and +
Rebased to master
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
It makes perfect sense and works as expected. This part of the code is too
under-tested so no point requiring a regression test for such a simple change.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch fixes it.
To test:
- Run
$ prove xt/author/icondirectories.t
=> FAIL: Tests fail:
Failed test 'opac_icon_directory: koha-tmpl/opac-tmpl/xslt/itemtypeimg exists'
- Apply the patch
- Run
$ prove xt/author/icondirectories.t
=> SUCCESS: Tests pass and don't raise warnings.
- Sign off
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Bug 15527 introduced a new directory (xslt) on the top level OPAC templates
directory. The tt_valid.t script should include that top level dir on the list
of excluded dirs so it doesn't look for themes there.
To test:
- Run
$ prove xt/tt_valid.t
=> FAIL: You get the following warning:
Can't stat koha-tmpl/opac-tmpl/xslt/en: No such file or directory
at xt/tt_valid.t line 8
- Apply the patch
- Run
$ prove xt/tt_valid.t
=> SUCCESS: Tests pass and don't raise warnings.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Introduced by bug 6624: When C4::UsageStats::BuildReport is modified,
the tests should be too.
Test plan:
prove t/db_dependent/UsageStats.t
should return green
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Note that if we maintain this list of sysprefs at two places, we will
probably have this test failing regularly..
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This failure has been introduced by
commit 243b797dd1
Bug 15285: Update common files
This is because the cannot_be_modified key is not always created by
C4::Utils::DataTables::ColumnsSettings subroutines
Test plan:
prove t/db_dependent/ColumnsSettings.t
should return green
And you can also test a table where the feature is set and a column
cannot be modified from the admin page.
NOTE: Works as described. I was pondering this potential
solution when I found it in bugzilla.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Caused by
commit 9c5c1bc9f1
Bug 15206: Make strings translatable
Test plan:
prove xt/single_quotes.t
should return green
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch fixes a regression introduced by
commit 7e70202d34
Bug 15381: Remove GetAuthType and GetAuthTypeCode
This first version will reintroduce the same behavior as before bug
15381: the record will be displayed even if it's no in the DB
Test plan:
Search for authorities
delete one
The zebra's index is not updated yet and the results will contain the
record you have deleted.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch makes the PayPal integration feature independent from the
URL::Encode library, which is absent in some supported distributions.
It uses the URI package which is already a Koha dependency.
To test:
- Apply the patch
- Notice there are no deps for URL::Encode
- Follow the steps from the original patch
=> SUCCESS: It works as expected
- Sign-off :-D
Note: I deleted the line in which $amount_to_pay was url-encoded, because that's
one of the things query_form does (and the variable is only used as a parameter to it).
Sponsored-by: ByWater Solutions
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
On log rotation Starman/Plack keeps failing (Auth.pm related problems) due to
permission issues:
Could not compile /usr/share/koha/opac/cgi-bin/opac/opac-search.pl: Can't locate Authen/CAS/Client/Response/Failure.pm
: ./Authen/CAS/Client/Response/Failure.pm: Permission denied at /usr/share/perl/5.20/base.pm line 97.
...propagated at /usr/share/perl/5.20/base.pm line 106.
BEGIN failed--compilation aborted at /usr/share/perl5/Authen/CAS/Client/Response.pm line 68.
Compilation failed in require at /usr/share/perl5/Authen/CAS/Client.pm line 8.
BEGIN failed--compilation aborted at /usr/share/perl5/Authen/CAS/Client.pm line 8.
Compilation failed in require at /usr/share/koha/lib/C4/Auth_with_cas.pm line 25.
BEGIN failed--compilation aborted at /usr/share/koha/lib/C4/Auth_with_cas.pm line 25.
Compilation failed in require at /usr/share/koha/lib/C4/Auth.pm line 63.
BEGIN failed--compilation aborted at /usr/share/koha/lib/C4/Auth.pm line 90.
Compilation failed in require at /usr/share/koha/opac/cgi-bin/opac/opac-search.pl line 34.
BEGIN failed--compilation aborted at /usr/share/koha/opac/cgi-bin/opac/opac-search.pl line 34.
As we do with zebra daemons, starman should be restarted as it doesn't handle log file rotation
gracefully[1].
I'm not sure how to reproduce it on a dev environment.
[1] https://github.com/miyagawa/Starman/issues/55
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
TEST PLAN
---------
1) prove t/db_dependent/Circulation_Issuingrule.t
-- fails
2) apply patch
3) prove t/db_dependent/Circulation_Issuingrule.t
-- pass
4) git diff origin/master -- t/db_dependent/Circulation_Issuingrule.t
-- notice that bug 5876 and bug 9129 combined to cause this
5) run koha qa test tools
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Test plan:
- Update your configuration file to use LDAP authentication and enable update
(<update>1</update>) option,
- login with an existing user with extended attrbitutes that are not in
LDAP mapping,
- check that all attributes are still here.
Signed-off-by: Chris <chrisc@catalyst.net.nz>
Signed-off-by: Philippe Blouin <philippe.blouin@inlibro.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
- t/db_dependent/ILSDI_Services.t was failing for me as I had
issues in my database, fixed with another delete line
- QA tools found a typo - comparision
- Added documentation of the new parameter to the ilsdi.pl page
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch adds the ability to query the extended patron
attributes via the ILSDI web service's GetPatronInfo service.
Example: ilsdi.pl?service=GetPatronInfo&patron_id=3&show_attributes=1
A new element <attributes> will be added if there
are any attributes available from the database.
We need to discuss the security implications of showing the
attributes. At present it will allow querying of non-public
(OPAC-visible) information. We might want to change this.
Sponsored-By: Halland County Library
Test plan:
* Configure Koha to make use of extended attributes:
Under 'Administration' -> 'Global system preferences' ->
'Patrons' tab -> Set 'ExtendedPatronAttributes' to 'Enable',
press save and switch to 'Web services' tab.
* Enable the ILS-DI service:
Under 'Administration' -> 'Global system preferences' ->
'Web services' tab -> 'ILS-DI' section:
Set 'ILS-DI' to 'Enable' and save.
* Create an attribute to query:
Under 'Administration' -> 'Patrons and circulation' ->
'Patron attribute types' press 'New patron attribute type':
Enter a type code, like 'DOORCODE', description and assign
a category that your test patron is a member of, then save.
* Set value for test user:
Locate the test patron, the new attribute should be listed
under 'Additional attributes and identifiers'.
Click 'Edit' and assign a value, like '1337' and save.
* Query the ILS-DI service:
http://127.0.1.1/cgi-bin/koha/ilsdi.pl?service=GetPatronInfo&patron_id=1&show_attributes=1
The output XML should have an element named 'attributes'
containing the data you entered.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Added unit tests to for GetBorrowerAttributes and GetPatronInfo.
Sponsored-By: Halland County Library
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Koha's SIP2 server should have support for the AV field ( field items ).
The biggest problem with this field is that its' contents are not really
defined in SIP2 protocol specification. All it says is "this field
should be sent for each fine item". Due to this, I think the contents of
the field need to be configurable at the login level, so that the
contents can be defined based on the SIP2 devices requirements for the
AV field.
Test Plan:
1) Apply this patch
2) Find a patron with outstanding fines
3) Run a patron information request using misc/sip_cli_emulator.pl using the new -s option with the value " Y "
4) Note there is an AV field for each fee containing the description and amount
5) Edit your sip config, add an av_field_template parameter to the login you are using such as
av_field_template="TEST [% accountline.description %] [% accountline.amountoutstanding | format('%.2f') %]"
6) Restart your SIP server
7) Repeat the patron information request
8) Note your custom AV field is being used!
Signed-off-by: Chris Davis <cgdavis@uintah.utah.gov>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
EDIT:
Fixing typo: records(s) -> record(s)
On details page, if authority is not used in any records, the page will display a more used friendly message: "This authority is not used in any records."
To test:
1) Do an authority search on authorities-home.pl. Notice that authorities not used in any records have a clickable link (under 'Used in:' column) which redirects to a catalog search with no results
2) Go back to your authority search results on authorities-home.pl and click 'Details'. Notice that under the auth name, there is a 'Used in X records' link that again returns a catalog search with no results.
3) Apply patch
4) Repeat steps 1, 2. Authorities not used in any records should no longer have clickable links and links to authorities which are used in records should work as expected.
5) Confirm it now says record(s) instead of records(s)
6) Confirm that on detail page for an authority which is not used by any records, it now says more friendly message.
Sponsored-by: Catalyst IT
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
