Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This adds new syspref, HoldsNeedProcessingSIP, which controls whether
a hold that is related to item will be filled automatically or not. If
the user has enabled the syspref then instead of fulfilling the hold
automatically the hold will go to "in processing" state.
To test:
1. Checkout a book to patron A
2. Place a bib level hold to the book for B
3. Patron A returns the book via SIP, to simulate this use:
./misc/sip_cli_emulator.pl -su koha -sp koha -l CPL -a 127.0.0.1 -p 6001 --item <ItemBarcode> -m checkin
4. Notice that no notification is generated for Patron B about hold
and that the hold status in intranet and opac is "In Processing".
5. Notice that patron A (or other patrons) cannot checkout a book
that is in processing, because it is considered to be attached to
the holdee (similarly to the waiting state):
./misc/sip_cli_emulator.pl -su koha -sp koha -l CPL -a 127.0.0.1 -p 6001 --patron <PatronABarcode> --item <ItemBarcode> -m checkout
Signed-off-by: Timothy Alexis Vass <timothy_alexis.vass@ub.lu.se>
Rebased-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some libraries would like to not only block the circulation of a guarantor based on fines owed by guarantees, but would also like to block circulation for all guarantees as well. Basically, if a family as a whole reaches a certain threshold of fines, the entire family will be blocked from checking out items.
Test Plan:
1) Apply this patch
2) Set NoIssuesChargeGuarantorsWithGuarantees to $14
3) Create a family of four ( 2 guarantors, 2 guarantees ) where the parents guarantee both children
4) Give 3 of the 4 a $5 fine
5) None of them should be able to check out items
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Prior to this patch we had a confusing situation, mandatory files were
in both installer/data/mysql and installer/data/mysql/mandatory
To make things clearer this patch move them all into the mandatory
subdir.
However kohastructure.sql stay in the "root" directory.
Test plan:
1. Drop and recreate your DB and use the installer to populate the DB
2. Use the merge request code from misc4dev to test the reset_all alias
3. Still with the merge request from misc4dev checkout master (you can
also try 19.11 and/or 19.05) and reset_all again
=> All the data from the SQL mandatory files must have been correctly
inserted into the DB
https://gitlab.com/koha-community/koha-misc4dev/-/issues/46
Note that this patch also remove the x flag for subtag_registry.sql
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
All subfields for a MARC21 field should always be in the same tab.
There were some mistakes found by the "MARC bibliographic framework
test" this fixes.
Before you apply the patch:
- Check the "MARC bibliographic framework test" page
- Ideally you should see the "wrong tab" mistakes
- Reset your db (reset_all) or drop your db and run the web installer
- Verify the page no longer points out any issues
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
-Apply patch
-Check OPACSuggestionUnwantedFields
-Check some fields as unwanted
-Go to the OPAC suggestion page and make sure these correct fields are hidden
-Turn on the system preference AllowPurchaseSuggestionBranchChoice to see the branch choice on the form
-Make sure you can correctly hide this one and still submit the purchase suggestion for without error.
-Go through each option and make sure it hides properly.
Note: You will only see the patron reason field when there are authorised values in the OPAC_SUG category
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When a patron is deleted, we should clean up the data connected
to the patron. This includes subscriptions to 'new issue arrived'
arrive messages from the serials module.
To test:
Part1:
- Before applying the patch
- Add a subscription and select a notice template for patron notification
- Go to the OPAC and subscribe to the email alert
- Log in as any other patron (not yourself) and subscribe with that patron too
- Verfiy on the subscription detail page, that the patrons are subscribed
- Note the borrowernumber of your patrons
- Delete the second patron
- Note borrowernumber and delete patron
- Run: SELECT * from alert; in a report
- Despite the patron being deleted, you will see entries for both
- Apply patch
- Run updatedatabase - verify no error message
- Run updatedatabase again - verify still no error message
- There should no longer be an entry with the deleted borrowernumber,
but only the entry for your own patron account
Part 2:
- Start fresh with the web installer, verify there are no errors on
creating the database tables
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
QA: Please answer the question in admin/background_jobs.pl
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
TODO:
- Add the FK on borrowernumber
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch introduces a new subpermission for managing SMTP servers, for
granularity.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new table to store SMTP servers configs.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This clarifies the preference name to make it clear we are talking about
the 'parts' that make up an 'item'. 'Part' is a well known term in
british english libraries and I think perhaps 'Materials' may be
confused with other terms?
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sponsored-by: Royal College of Music [https://www.rcm.ac.uk/]
Sponsored-by: PTFS Europe [https://ptfs-europe.com/]
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This add an 'udated_on' column to the letter table and displays
the information in 'slips and notices'.
To test:
- Apply patch
- Run updatedatabase
Note: the existing letters will all be set to the
currnet date).
- Go to Tools > Notices and slips
- Verify there is a new column "Last updated" in the table
Note: The table will always display the newest change date
of the different message transport types.
- Edit any notice
- Verify the "Last updated" is shown for any transport type
with an existing notice definition
- Edit and add a notice
- Verify the dates are correctly stored
- Test the column configuration for the new column works
correctly
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds conditions to prevent the removal of items.paidfor if it
is populated and also adds the removal fo the marc_subfield_structure
row if it exists.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch splits the DB update such that the 'paidfor' field is checked
for distinctly in the deleteditems table rather than assuming if it
exists in the items table it will also exist in deleteditems.
We also correct the check as highlights by Julian.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In bug 19919 we removed all references to setting, unsettling and
referring to the paidfor field but we neglected to actually drop the
field from the database (I think I intended to do this, but was asking
for feedback on the approach before adding the actual db change.. then
completely forgot when it went through SO/QA quickly).
In bug 23463 we inadvertently re-introduced some of the setting code
during a rebase.
In bug 18501 we then moved that inadvertently re-introduced setter into
Koha::Item->store.
We should kill it off once and for all!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Websites should have a meta description tag that shows in search engine results.
The content should also be available to set as a system preference.
To test:
1) Look at opac-main source (in the browser) and see that meta name="description" is missing.
2) Apply patch.
3) Run: perl installer/data/mysql/updatedatabase.pl
4) Go to system preferences > OPAC and add a description to OpacMetaDescription.
5) Look at opac-main source and confirm that meta name="description" now has content equal to the text set in the OpacMetaDescription system preference.
6) Sign off.
Sponsored by: Lunds University Libraries
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Works as advertised. Newlines are preserved. Double quote is rendered
as ". Nice enhancement!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If the database update for bug 21443 is run, and the library changes any
of the hourly or daily rental fees following the calendar, a second run
of the database update will overwrite those changes.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fix fields order
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
After looking at Marcel's comments, the problem is in our matching
to hold_fill_targets - rather than adjusting to find filled/waiting holds we
could ensure that hold_fill_targets only refers to the specific hold it
is intended to
This patch is clearer, if slightly less performant than last (we now return all
the reserves and have to find the 'highest')
Test Plan:
1 - Create and use a patron that can place multiple record level holds per record
2 - Create a record with X items, each at a different library
3 - Place X 'Next available' holds on the record for the patron using the 'Holds to place' box
4 - perl misc/cronjobs/holds/build_holdsqueue.pl
5 - Check in LibraryA's copy as LibraryA and confirm the hold
6 - Revisit request.pl for the record, notice the next hold in line is now item-specific
7 - Checkout the item to the patron, notice the remaining hold is marked waiting
8 - Attempt to place another hold for your patron, notice that it requires an item-specific hold
8 - Apply this patch
9 - Repeat steps 1-5
10 - Revisit request.pl for the record, notice the next hold in line has *not* become item-specific
11 - Checkout the item to the patron, ensure the first hold is filled and the second remains record level
12 - Repeat whole test plan without building holds queue to confirm holds are still treated correctly
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
git grep -l -E "link:\s*\"?[0-9]" | xargs sed -i -e "/link:/ s/130/\"Title-uniform\"/"
Only one occurrence without quotes around 130.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch:
* reverts changes on misc/admin/set_password.pl
* makes category param mandatory for AuthUtils::is_valid_password and AuthUtils::generate_password
* changes onboarding.pl to set category param in AuthUtils::is_valid_password
* Completes t/db_dependent/AuthUtils.t and drops t/AuthUtils.t
* Removes offending <input type="number"/> and replaces it by <input type="text" inputmode="numeric" pattern="[0-9]*"/>
https://bugs.koha-community.org/show_bug.cgi?id=23826
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Field 943$a has link value "130". This does not work; 130 is not a search
index. It should be Title-uniform.
Note: Only used on a search link in the intranet MARC detail page.
In some cases "130" should be replaced by "Title-uniform", but sometimes
130 without quotes had to be replaced. Performed by two sed statements
on git grep results.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates the version of Bootstrap in the OPAC from 2.3.1 to
4.5.0. The Bootstrap JavaScript files have been replaced with custom
builds of the 4.5.0 JavaScript source files. The Bootstrap CSS is now
built into the OPAC CSS by loading the required Bootstrap 4.5.0 SCSS
files in node_modules.
OPAC SCSS now starts with Bootstrap customizations:
/* Bootstrap variable customizations */
$headings-color: #727272;
...
Followed by loading the necessary Bootstrap SCSS files:
/* Bootstrap imports */
@import "../../../../../node_modules/bootstrap/scss/functions";
@import "../../../../../node_modules/bootstrap/scss/variables";
...
Followed by our CSS. The build process for generating compiled CSS now
creates a file which bundles Bootstrap CSS and ours. Removed from the
Koha source: Bootstrap CSS files, Bootstrap "glyphicons" images.
The upgrade to Bootstrap 4 involved a lot of markup changes to conform
with new Bootstrap classes, especially in classes related to the grid.
Besides duplicating the grid we used before, this upgrade adds some new
features made possible by Bootstrap 4.5's use of flexbox as a layout
tool. This includes custom ordering of columns based on class names:
https://getbootstrap.com/docs/4.5/layout/grid/#order-classes.
Other areas where the most changes have been made: Navigation menus,
breadcrumb menus, buttons, dropdowns.
Bootstrap's JavaScript file is now "bootstrap.bundle.min.js" to reflect
the fact that a required JavaScript asset is now distributed separately
in Bootstrap 4. The "bundle" version includes Popper.js.
Unrelated changes: Indentation corrections, removal of invalid
"//<![CDATA[" markers, removal of invalid script type attributes.
To test, apply the patch and run 'yarn install' to install Bootstrap as
an npm module. Run 'yarn build --view opac' to regenerate the OPAC CSS.
Test as many aspect of the OPAC as possible, viewing pages at various
browser widths to confirm that everything adjusts well. Test with
various OPAC interface system preferences enabled and disabled.
Test self checkout and self checkin.
Known issues: RTL support has not been updated.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some library would like to delay the importing of invoices until
a time of their choosing. The invoices should be imported into
the database as they do now, but the invoice processing should
be skipped. Instead, any invoice file with a status of 'new'
should have an 'Import' button to process the invoice.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Enable the new syspref EdifactInvoiceImport
4) Run the edi cronjob to import a new invoice file
5) View EDI messages table at /acqui/edifactmsgs.pl
6) Note the invoice files is not processes, and retains the status of 'new'
7) Use the 'import' button to process the invoice
8) Note the invoice is now marked 'received' and the 'import' button is gone
9) Verify the invoice was actually processes
Signed-off-by: Debi Stears <DDStears@washoecounty.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If you define the address we use it, if not we fallback,
it's not really a redirect, and that just makes the name longer.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
As requested, I have embelished the syspref description to more
accurately depict the fallback sequence for email delivery.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sponsored-by: Catalyst IT
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
1. Set no email addresses in patron record then checkout
items to the patron making the due date in the past
2. Visit patron's home library page: Administration > Libraries
Set a branch email and in global system preferences observe there is no syspref
named RedirectAddressForFailedOverdueNotices
3. Manually run overdue_notices.pl
4. Check the message_queue database table and observe there is a
print overdue notice and a email notice with to_address of the
branch email address
5. Apply patch
6. Run database update:
cd installer/data/mysql
sudo koha-shell <instance_name>
./updatedb.pl
7. Confirm there is a new system preference named:
RedirectAddressForFailedOverdueNotices
Give it a different email address to that in the branch email.
7. Repeat steps 1,3,4 and observe that the failed overdue notices have been
sent to the email defined in RedirectAddressForFailedOverdueNotices
Sponsored-By: Catalyst IT
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It defaults to 0 in get_template_and_user
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The FIXME is no longer valid since we fixed the X-Forwarded headers
for Plack. And since we do not even use using_https anymore in
the templates (see bug 21094).
Test plan:
Run Auth.t
Git grep for using_https
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
Run the upgrade twice.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Replace timestamp by publicationdate in translations.
Applies to sample notices and sample news.
Test plan:
Run a new install or pick a sql file and run it on cmdline.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Applies to sample notices and sample news.
Replace timestamp by publicationdate.
Also adjust notice in TemplateToolkit.t.
Test plan:
Run dbrev and verify if ISSUESLIP refers to opac_news.publicationdate.
Run t/db_dependent/Letters/TemplateToolkit.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Change timestamp to publicationdate, add updated_on as 'real' timestamp.
Test plan:
Run install or upgrade. Check table opac_news.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sponsored-by: Cooperative Information Network (CIN)
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This takes care of more occurences of staff client and changes it to
staff interface, including in code comments.
To test:
- I think in this case careful code review is what we look for.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch
* sets one check for reserves and another for old_reserves in
atomic update
* Adds a message below the checkbox and adds detail when a hold is non
priority
* Fixes issue when there are more than one hold, but the first is non
priority
* Adds test case for this last scenario
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This makes changes to strings involved in this feature:
- Rephrases the system preference description into a sentence
- Rephrases message shown in OPAC on submitting (library has not actively
approved, so just say that the record has been modified)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Testplan for this patch:
1. Apply patch.
2. Make sure syspref "AutoApprovePatronProfileSettings" is set to "Disable".
3. Edit patron personal details via opac interface.
4. Expect modifications to require manual approval by staff via link on main page.
5. Set syspref "AutoApprovePatronProfileSettings" to "Enable".
6. Edit patron personal details via OPAC interface again.
7. Expect modifications to have been approved automatically.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
This works, we may want some different text for this situation in the OPAC, it still says the librarian has to approve the change.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This translates the new notices and CSV profie for late orders,
makes some minor changes to the patron category descriptions
and numbering patterin labelling.
To test:
- Make sure German language is installed, see:
https://wiki.koha-community.org/wiki/Installation_of_additional_languages_for_OPAC_and_INTRANET_staff_client
- Run the web installer and choose de-DE
- Select all sample files
- Make sure they all install without any errors
Bonus:
- If you can speak German, you can check the translations as well :)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When lost items are not marked as returned, they are still subject to
the long overdue cron, so an item that has already been marked Lost may
automatically roll to Long Overdue. In some cases, a library may not
want that lost value to change. This becomes especially important with
the introduction of Claims Returned, which uses a variety of lost.
Test Plan:
1) Set up a long overdue item that would be moved to lost by longoverdue.pl
2) Run the cronjob with the new --skip-lost-value option
3) Note the item is not altered
4) Include that value in the new system preference DefaultLongOverdueSkipLostStatuses
5) Run the cronjob *without* the new option
6) Note the item is not altered
7) Run the cronjob again with the new command line option, but set it to
a different value so the item will be affected
8) Note the item is altered as it would have been before this patch was
applied
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patchset adds a new syspref: BiblioItemtypeInfo
If you set BiblioItemtypeInfo to Koha, you will see the Koha
record level itemtype info. This info is also shown if item-level_itypes
is set to biblio
Display of icons are controlled by
noItemTypeImages/OpacnoItemTypeImages
Material type display is controlled by DisplayIconsXSLT/DisplayOPACIconsXSLT
To test:
1 - Apply patch
2 - Update database
3 - Do an opac search and view results
4 - Switch pref to 'Koha' and refresh
5 - Note itemtypes appear
6 - Click in to a record details
7 - Note you see itemtype and icon
8 - Switch the pref
9 - Note you don't see record level itemtype and icon
10 - Repeat in staff interface
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It adds a new localization directory that could
host a custom SQL file for each language,
xx-YY/custom.sql
This will be the last file to be loaded at
install time, it can be used to set any difference
from default values.
It can't be deselected at install time.
Moved corresponding files for de-DE, it-IT,
nb-NO and completed es-ES
To test:
1) Apply the patch
2) Install es-ES/de-DE/it-IT/nb-NO translation (any lang)
( cd misc/translation; ./translate install es-ES )
3) Do a clean install using es-ES
4) After all files have been loaded check:
* A new section labeled "Localization data added"
with one file, custom.sql
* Inspect the value of FrameworksLoaded syspref,
last entry must be custom.sql
5) Remove/rename the file or localization dir and
repeat 3/4, install must proceed normally
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This feature is disabled by default for all credit types. To enable it
you have to set the syspref AutoCreditNumber to the value of your choice
and then enable the feature for each credit type you want.
System credit types can be modified too (but only this particular field
can be modified)
Also, throw an exception when the feature is enabled and a value for
credit_number has already been set
Updated test plan:
Test plan:
0. Apply patch, run updatedatabase and update_dbix_class_files
1. Go to Admin » Column settings, and uncheck the 'hidden' box for
column credit_number in table account-fines. It will be easier for
testing
2. Create a manual credit for a borrower. Verify in Transactions tab
that this credit has no number generated
3. In Admin » Credit types:
a. edit the FORGIVEN type and enable credit number generation
b. create a new type A, check "can be manually added" and "enable
credit number"
c. create a new type B, check "can be manually added". Do NOT enable
credit number
4. Change syspref 'AutoCreditNumber' to 'incremental'
5. Create more manual credits with types CREDIT and B, and verify that
the numbers are not generated
6. Create more manual credits with types FORGIVEN and A, and verify that
the numbers generated are 1, 2, 3, ...
7. Change syspref 'AutoCreditNumber' to 'annual'
8. Create more manual credits with types CREDIT and B, and verify that
the numbers are not generated
9. Create more manual credits with types FORGIVEN and A, and verify that
the numbers generated are '2020-0001', '2020-0002', ...
10. Change syspref to 'AutoCreditNumber' to 'branchyyyymmincr'
11. Create more manual credits with types CREDIT and B, and verify that
the numbers are not generated
12. Create more manual credits with types FORGIVEN and A, and verify
that the numbers generated are 'BRANCHA2020020001',
'BRANCHA2020020002', ... (assuming you are connected to library
BRANCHA, and it's February 2020)
13. Set library to another one, say BRANCHB
14. Create more manual credits with types FORGIVEN and A, and verify
that the numbers generated are 'BRANCHB2020020001',
'BRANCHB2020020002', ...
15. Edit the letter ACCOUNT_CREDIT, and add [% account.credit_number %]
somewhere. Go back to Transactions tab and click on 'Print' for one
line that has a credit number. Make sure the number is there.
16. prove t/db_dependent/Koha/Account.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In some areas it's required to sequentially number payment slips /
receipts.
This patch adds a database column accountlines.credit_number and a
system preference AutoCreditNumber to control how this number will be
generated. The following options are available:
- Do not automatically generate credit numbers.
This is the current behaviour and the default syspref value.
- Automatically generate credit numbers in the form <year>-0001 (annual)
- Automatically generate credit numbers in the form
<branchcode>yyyymm0001 (branchyyyymmincr)
where <branchcode> is the branch where the user (staff member) is
logged in
- Automatically generate credit numbers in the form 1, 2, 3
(incremental)
It also adds a column (hidden by default) in the table under
Transactions tab to display this number.
Test plan:
0. Apply patch, run updatedatabase and update_dbix_class_files
1. Go to Admin » Column settings, and uncheck the 'hidden' box for
column credit_number in table account-fines. It will be easier for
testing
2. Create a manual credit for a borrower. Verify in Transactions tab
that this credit has no number generated
3. Change syspref 'AutoCreditNumber' to 'incremental'
4. Create more manual credits, and verify that the numbers generated are
1, 2, 3, ...
5. Change syspref 'AutoCreditNumber' to 'annual'
6. Create more manual credits, and verify that the numbers generated are
'2020-0001', '2020-0002', ...
7. Change syspref to 'AutoCreditNumber' to 'branchyyyymmincr'
8. Create more manual credits, and verify that the numbers generated are
'BRANCHA2020020001', 'BRANCHA2020020002', ... (assuming you are
connected to library BRANCHA, and it's February 2020)
9. Set library to another one, say BRANCHB
10. Create more manual credits, and verify that the numbers generated are
'BRANCHB2020020001', 'BRANCHB2020020002', ...
11. Edit the letter ACCOUNT_CREDIT, and add [% account.credit_number %]
somewhere. Go back to Transactions tab and click on 'Print' for one
line that has a credit number. Make sure the number is there.
12. prove t/db_dependent/Koha/Account.t
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new system preference PatronDuplicateMatchingAddFields
to list the patron's attributes to use for deduplication.
The default value is surname, firstname and dateofbirth to keep existing
behaviour.
Test plan:
0. Apply the patch and execute the update DB entry
1. Create a new patron with surname, firstname
2. Create another patron with the same surname, firstname values
=> Confirm you get the duplicate warning
3. Modify the syspref to edit the list of attributes used to dedup
4. Repeat 1 and 2 with different values and confirm that you get the
behaviours you expect
Note: This is only impacting the add patron form from the UI, not the
import patrons tool.
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This updates the descriptions for 952$a und $b in all existing
frameworks, if the English description hasn't been changed since
installing Koha.
To test:
- Look at your item edit form or on the MARC tab
for the descriptions shown for $a and $b for any framework
- Note the descriptons say '... location'
- Change one or more using the frameworks.
- Run the database update
- Verify only the unchanged ones have been updated
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is some confusion between the different locations and
libraries appearing in the GUI.
holdingbranch is sometimes labeled as current location
homebranch is sometimes labeled as permanent location
The patch fixes these occurences in various files:
- Item search form, results and export options
- MARC frameworks for en, fr-Fr, nb-NO, and pl-PL
- Holds awaiting pickup report
- Item display on order receive screen (create items on receive)
- OPAC system preference: OPACResultsLibrary
- Staff and OPAC detail pages
- Lost items report
- Rotating collections
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sponsored-by: Koha-Suomi Oy
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The Google Transliterate API was deprecated on May 26, 2011. This patch
removes the feature and associated system preference.
To test, apply the patch and run the database update process.
- Go to Administration -> System preferences and search for
'GoogleIndicTransliteration.' There should be no results.
- Search the Koha codebase for references to
'GoogleIndicTransliteration.' There should be no current references..
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a system preference called 'NewsToolEditor' which allows for the choice between TinyMCE and CodeMirror in the News Feature.
TEST PLAN:
1. Apply patch and run updatedatabase
2. Go to Tools > News and make a new entry or edit an existing News item.
3. When you initially load you should gte the TinyMCE editor (WYSIWYG)
4. Search for the NewsToolEditor system preference and switch to CodeMirror.
5. Reload your News item and now you should see the CodeMirror editor.
6. Try saving content with both and maki sure it works.
7. Try adding some different HTML tags in CodeMirror mode, saving, and making sure it looks right when you switch back to TinyMCE
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Add a new permission to merge invoices
Test plan:
- Remove the new permission "merge_invoices" for a given patron,
use it to log in into Koha
- Create 2 invoices, try to merge them
=> There is no way to merge it
- Add the permission
=> Now you can merge the invoices
Sponsored-by: Galway-Mayo Institute of Technology
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Add a new permission to delete acquisition baskets
Test plan:
- Remove the new permission "delete_basket" for a given patron,
use it to log in into Koha
- Create basket, try to delete it
=> There is no way to delete it
- Add the permission
=> Now you can delete the basket
Sponsored-by: Galway-Mayo Institute of Technology
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Add a new permission to delete invoices
Test plan:
- Remove the new permission "delete_invoices" for a given patron,
use it to log in into Koha
- Create an invoice, try to delete it
=> There is no way to delete it
- Add the permission
=> Now you can delete the invoice
Sponsored-by: Galway-Mayo Institute of Technology
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Add a new permission to edit invoices
Test plan:
- Remove the new permission "edit_invoices" for a given patron,
use it to log in into Koha
- Create an invoice, edit it (click "detail")
=> You can see the detail of the invoice, but cannot edit it. It's a read-only view.
- Add the permission
=> The form is back and you can modify the invoices and save the changes.
Also, you are able to create adjustments.
Sponsored-by: Galway-Mayo Institute of Technology
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
New permission to reopen a closed invoice.
Test plan:
- Remove the new permission "reopen_closed_invoices" for a given patron,
use it to log in into Koha
- Create an invoice, close it
=> You are not able to reopen the invoice
- Add the permission
=> You are able to reopen the invoice
Sponsored-by: Galway-Mayo Institute of Technology
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In an effort to use more inclusive language we have added a new coding guideline:
https://wiki.koha-community.org/wiki/Coding_Guidelines#TERM3:_Inclusive_Language
This patchset renames a syspref to be clearer and follow the guideline
To test:
1 - Apply patch and updatedatabase
2 - git grep NotesBlacklist
3 - Note all remaining occurrences are translations, db updates, and release notes
4 - Add a field (e.g. '520' ) to the NotesToHide systempreference
5 - View a record with a 520 field on the opac
6 - Confirm the field does not show in the 'Title notes' tab
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a database update to increase the size of the
opac_news.lang column in order to accommodate longer values.
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch builds on Bug 22318 to move the OpacLoginInstructions system
preference into the Koha news system, making it possible to have
language- and library-specific content.
To test you should have some content in the OpacLoginInstructions system
preference. Apply the patch and run the database update process.
- Go to the OPAC and click the login link.
- In the login modal, confirm that the content which was previously in
the OpacLoginInstructions system preference displays correctly
below the login form.
- While not logged in to the OPAC, navigate directly to
/cgi-bin/koha/opac-user.pl. The OpacLoginInstructions content should
display correctly here as well.
- In the staff client, go to Tools -> News and verify that the content
from OpacLoginInstructions is now stored in news items. There
should be one entry for each of the enabled translations in your
system, for instance 'OpacLoginInstructions_en',
'OpacLoginInstructions_fr-FR', 'OpacLoginInstructions_cs-CZ'
- Go to Administration -> System preferences and confirm that the
OpacLoginInstructions preference has been removed.
- To test the correct selection of language-specific content you must
run the translation update/install process for the languages you're
updating.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves the OpacCustomSearch system preference into the Koha
news system, making it possible to have language- and library-specific
content.
To test you should have some content in the OpacCustomSearch system
preference. Apply the patch and run the database update process.
- Go to the OPAC and confirm that the content which was previously in
the OpacCustomSearch system preference now displays correctly where
it was before.
- In the staff client, go to Tools -> News and verify that the content
from OpacCustomSearch is now stored in news items. There should be
one entry for each of the enabled translations in your system, for
instance 'OpacCustomSearch_en', 'OpacCustomSearch_fr-FR',
'OpacCustomSearch_cs-CZ'
- Go to Administration -> System preferences and confirm that the
OpacCustomSearch preference has been removed.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch builds on Bug 22318 to move the opaccredits system
preference into the Koha news system, making it possible to have
language- and library-specific content.
To test you should have some content in the opaccredits system
preference. Apply the patch and run the database update process.
- Go to the OPAC and confirm that the content which was previously in
the opaccredits system preference now displays correctly where
it was before.
- In the staff client, go to Tools -> News and verify that the content
from opaccredits is now stored in news items. There should be
one entry for each of the enabled translations in your system, for
instance 'opaccredits_en', 'opaccredits_fr-FR',
'opaccredits_cs-CZ'
- Go to Administration -> System preferences and confirm that the
opaccredits preference has been removed.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch introduces an index for the used_for column
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch renames the introduced attribute for later usage on the API,
and changes the logic to use it the other way around.
It also adds a KEY for the flag, as it will be used in WHERE statements.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1) Update database
2) Update schema
3) In staff side, go to Tools -> CSV profiles
4) Make a CSV profile with profile type = MARC and usage = Export
records
5) Leave 'Show option in OPAC' unchecked and save
6) Go to OPAC and add an item to your cart
7) Click Cart, click Download, confirm that your newly created CSV
profile does not show as an option
8) Go back and edit CSV profile on staff side
9) Check the 'Show option in OPAC' checkbox and save
10) Go back to download cart in OPAC
11) Confirm the CSV profile now shows in the dropdown
Sponsored-by: Catalyst IT
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
- Make pref use "checked in" instead of "returned".
- Add message to database update
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This adds the ability to not refund lost item fees on return if the item
has been lost for more than a given number of days.
Test Plan:
1) Set the new system preference NoRefundOnLostReturnedItemsAge to a number of days
2) Find a lost item that has been lost longer than that NoRefundOnLostReturnedItemsAge days which would have otherwise been refunded
3) Return the item
4) Note no refund on the lost item fee was processed, the fee remains unchanged
5) prove t/db_dependent/Circulation.t
Signed-off-by: Deb Stephenson <DStephen@dubuque.lib.ia.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This fixes the capitalization in sample notices files to
follow coding-guidelines. Only applies to English, translations
remain unchanged.
Additional fixes:
- Overdues slip added the letter code as subject instead of the description
- Opac changed to OPAC for self-registration verification emails
German (de-DE) file was not changed, as there is a pending translation
bug that will take care of these (bug 25129).
To test:
- Verify changes by running the web installer for the changed
files and verify sample notices install without error
- Verify subjects and notice descriptions are correct
- Run tests in t/db_dependent/Letters*
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Currently, the main table of ILL requests will display all ILL
requests in the database, regardless of their status. For libraries
with active ILL this quickly leads to a lot of requests being displayed,
and the main page of the ILL module taking a long time to load. This
patch proposes to fix this by introducing the ILLHiddenRequestStatuses
syspref, which can take a pipe-separated list of ILL statuses that
will be hidden from view in the ILL module. This means that the
only way to find a hidden request will be through a report.
To test:
- Apply the patch and make sure the atomic database update is run
- Make sure you have a few ILL requests, with at least two different
statuses
- Check that all requests are still displayed in the main table of
ILL requests
- Add one of the statuses* you have in your database to the
ILLHiddenRequestStatuses syspref, reload the ILL module frontpage
and verify that requests with the given status are not displayed
- Change the syspref to another status and verify requests with
that status are now hidden
- Change the syspref to hold both statuses, separated by the pipe
symbol (e.g.: A|B). Verify that no requests with the given
statuses are now displayed
- Run the ILL REST API tests, e.g.:
$ sudo koha-shell -c "prove t/db_dependent/api/v1/illrequests.t" kohadev
* = The ILLHiddenRequestStatuses syspref should hold status codes, like
"REQ" and "NEW", not their human readable counterparts.
Signed-off-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds SVG versions of the Bridge item type icon set to
misc/interface_customization/itemtypeimg/bridge. It adds some
new icons, and updates some existing icons. All GIF versions of the
icons are replaced with transparent PNG files.
Icon changes:
- English text has been removed from all icons
- New icon for "Periodical," to differentiate from "Journal"
- New icon, "Controller" for video games
- New icon for "Laserdisk" to differentiate from "DVD"
- New icon for "Kit" to differentiate from "Archive"
- New icon, "Reference books."
- Updated "badges" on "Juvenile book" and "Reserve book" to try to
express the information without English-specific letters.
Before applying the patch, update some item types or collection codes
with Bridge icons. Apply the patch and run the database update process.
- Open the advanced search page in the staff client and confirm that
your item type or collection code icons were updated correctly.
- Go to Administration -> Item types and edit an item type.
- Check the "bridge" tab and confirm that the icon options look
correct.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=23391
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
