The hbyymmincr autoBarcode builder looks up all barcodes that begin with
any number of letters ( the branchcode ) and a two-digit year directly
afterward ( e.g. MPL15 ), then grabs the last four digits as the
increment counter. The problem is, this does not take months into
account, so unlike the description that says the system is limited to
10,000 items a month, it is limited to 10,000 items per *year*.
This situation can easily be corrected my adding the month into the
lookup ( e.g. MPL1501 ).
Test Plan:
1) Enable autoBarcode, set to hbyymmincr
2) Catalog an item, let the barcode.pl plugin generate
the next barcode.
3) Catalog an item with the barcode MPL15009999
4) Catalog another item, use the barcode.pl plugin to
generate the next barcode.
5) Note the barcode is generated ends with '0001' instead of the
correct increment
6) Apply this patch
7) Repeat step 4
8) Note the barcode now ends with the correct increment
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jeanne Heicher <nppublib@pa.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Problem confirmed - the continuing number bit was not reset
to start counting from 1 again on the beginning of a new month.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Without this patch
perl -wc C4/VirtualShelves.pm
failed:
Constant subroutine C4::VirtualShelves::SHELVES_MASTHEAD_MAX redefined
at /usr/share/perl/5.20/constant.pm line 156.
Constant subroutine C4::VirtualShelves::SHELVES_COMBO_MAX redefined at
/usr/share/perl/5.20/constant.pm line 156.
Constant subroutine C4::VirtualShelves::SHELVES_MGRPAGE_MAX redefined at
/usr/share/perl/5.20/constant.pm line 156.
Constant subroutine C4::VirtualShelves::SHELVES_POPUP_MAX redefined at
/usr/share/perl/5.20/constant.pm line 156.
Constant subroutine C4::VirtualShelves::SHARE_INVITATION_EXPIRY_DAYS
redefined at /usr/share/perl/5.20/constant.pm line 156.
Subroutine GetShelves redefined at C4/VirtualShelves.pm line 103.
Subroutine GetAllShelves redefined at C4/VirtualShelves.pm line 159.
Subroutine GetSomeShelfNames redefined at C4/VirtualShelves.pm line 189.
Subroutine GetShelf redefined at C4/VirtualShelves.pm line 230.
Subroutine GetShelfContents redefined at C4/VirtualShelves.pm line 262.
Subroutine AddShelf redefined at C4/VirtualShelves.pm line 315.
Subroutine AddToShelf redefined at C4/VirtualShelves.pm line 353.
Subroutine ModShelf redefined at C4/VirtualShelves.pm line 394.
Subroutine ShelfPossibleAction redefined at C4/VirtualShelves.pm line
454.
Subroutine DelFromShelf redefined at C4/VirtualShelves.pm line 545.
Subroutine DelShelf redefined at C4/VirtualShelves.pm line 589.
Subroutine GetBibliosShelves redefined at C4/VirtualShelves.pm line 603.
Subroutine ShelvesMax redefined at C4/VirtualShelves.pm line 628.
Subroutine HandleDelBorrower redefined at C4/VirtualShelves.pm line 648.
Subroutine AddShare redefined at C4/VirtualShelves.pm line 683.
Subroutine AcceptShare redefined at C4/VirtualShelves.pm line 703.
Subroutine IsSharedList redefined at C4/VirtualShelves.pm line 731.
Subroutine RemoveShare redefined at C4/VirtualShelves.pm line 750.
Subroutine _shelf_count redefined at C4/VirtualShelves.pm line 764.
Subroutine _CheckShelfName redefined at C4/VirtualShelves.pm line 788.
C4/VirtualShelves.pm syntax OK
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It's preferable to limit the permission to delete shelves.
Apply both patches before testing, then follow this test plan
Currently a public list can only be deleted by its owner.
This means lists can exist infinitely.
This will introduce a new permission for list. With this permission, a
staff member will be allow to delete any public lists.
Test plan:
1/ Add the manage_shelves permission to a patron.
2/ Login with this patron
3/ Go on the public list view
4/ You should be able to delete all public lists
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently a public list can only be deleted by its owner.
This means lists can exist infinitely.
This will introduce a new permission for list. With this permission, a
staff member will be allow to delete any public lists.
Test plan:
1/ Add the manage_shelves permission to a patron.
2/ Login with this patron
3/ Go on the public list view
4/ You should be able to edit all public lists
Followed test plan. Works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The browse by last name letters on the patron search for the patron card
creator doesn't work quite right. If extended patron attributes are
disabled, it works fine, but if they are enabled, they are searched even
when using the browse last name. Thus, if a searchable attribute has a
"D" in it, and one clicks the "D" link for the last name browser, that
patron will show even if he or she has no "D" in his or her hame!
Test Plan:
1) Enable extended patron attributes
2) Add a new searchable patron attribute
3) Create a new patron with the last name "Ace"
4) Add the value "D" to the attribute for this patron
5) Browse to the patron card maker, start a new patron batch
6) Click "Add item(s)" to bring up the patron search
7) Click the letter "D" in the patron search box
8) Note that "Ace" shows in the results list
9) Apply this patch
10) Repeat step 7
11) Note that "Ace" no longer shows in the results list
12) Perform a regular search by putting the letter "D" in the "Name:"
field, and hit the "Search" button
13) Note this time the results *do* have Ace in them
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Well described for a tricky bug. Reproducible. Fixed with this patch.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
This works as described, no problems or regressions found.
Imagine this scenario: we have one record with four items. Two of those
items are checked out, one of those items is a waiting hold, and one of
those items is available. We would expect to see this on the search
results page. Instead, we will see both non-checked out items as
unavailable due to waiting holds.
This is due to a semantic issue GetReserveStatus.
C4::Search::searchResults uses GetReserveStatus to get the reserve
status of each item, but unlike all other calls to the sub, this one
passes in not only itemnumber, but biblionumber.
When no reserve is found for the available item, the subroutine uses the
biblionumber to grab what is essentially an arbitrary reserve to use for
the status. This makes no sense and this functionality should be
entirely removed from the subroutine so regressions like this will be
prevented in the future.
Test Plan:
1) Create one record with 4 items
a) check two of the items out to patrons
b) set one of the items as a waiting hold
c) leave the fourth item as available
2) Run a search where this record will be in the results list
3) Note that the results list 2 items on loan, two unavailable
4) Apply this patch, reload the search results
5) Note that the results list 1 available, 2 on loan, 1 unavailable
Signed-off-by: John Andrews <jandrews@washoecounty.us>
Signed-off-by: Sheila Kearns <sheila.kearns@state.vt.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Note: This is for the staff search result list!
Works as expected.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
C4::Acquisition::ModReceiveOrder updates the aqorders with
budget_id=NULL if no budget_id given in parameter.
Actually the same budget_id should be used.
In tests (especially t/db_dependent/Acquisition/TransferOrder.t),
ModReceiveOrder is not called with a budget_id param and set to NULL the
budget_id value.
test plan:
prove t/db_dependent/Acquisition/TransferOrder.t
should return green
Note that this bug should not appear using the interface.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The fix makes sense, and running
$ prove t/db_dependent/Acq*
returns all green. koha-qa.pl also likes it.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There were multiple calling conventions for C4::Context's
set_userenv routine. So the following commands were used to
find discrepancies:
grep "::set_userenv" `find .`
grep "\->set_userenv" `find .`
The first grep demonstrated that the smaller change is from
:: to -> as only C4/Auth.pm, installer/InstallAuth.pm, and
t/db_dependent/Circulation.t would need to be modified. This
patch corrects C4::Context's set_userenv routine to be object
call based (use ->) by using a shift to ignore the first
parameter, and modify the three files found with :: calls.
As the result of trying to roll a distribution,
t/Circulation_barcodedecode.t was discovered to be faulty. The
cause being incorrect parameters! This was hidden when there
was no shift in the set_userenv routine. However, with its
correction, the test broke.
This led me to read the POD documentation for the function
set_userenv in C4::Context and realize it was outdated as
well. It has been revised to match the current version of
the function.
Then intentionally bad parameters passed to the set_userenv
routine in C4::Context were hunted down. The biggest problems
were missing surnames or branch names.
Rebase required because of shibboleth change in C4/Context.pm
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There was an instance of the pragma missed which meant the the original
patch set didn't actually solve the problem in a large number of cases
This patch adds in the relevant statement.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To Test:
1) Enable the system preference SessionRestrictionByIP
2) Change your system IP. It will not checkout your system IP or signout.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In this special case (the suggestion is linked to "all funds"), the
budgetid value should be NULL in DB.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes old and new tests.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the ability to search orders using the basket creator.
Test plan:
- go on the order advanced search form (acqui/histsearch.pl)
- use the autocomplete input to search patrons
- launch the search and verify the results are consistent with the
values you have filled.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Having $ordernumber as the parameter in a function which is
handling suggestions and it is used as a suggestion id is
confusing to the coder and person trying to read the code.
This patch corrects the confusion.
REVISED TEST PLAN
-----------------
1) perldoc C4::Suggestions
-- notice it says ordernumber for the GetSuggestions example.
2) Ensure you have CPL in your branches table.
3) prove -v t/db_dependent/Suggestions.t
-- if you have more than 8 itemtypes in your database, two
tests at the end will fail, but that is not relevant to
the modified GetSuggestions code.
4) apply patch
5) perldoc C4::Suggestions
-- notice it is corrected now.
6) prove -v t/db_dependent/Suggestions.t
-- it should run with the same results as in step 3.
That is, if you have 8 itemtypes, all pass, otherwise
those two tests fail.
7) run koha qa test tool
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
1. Add 4 item search fields (in Administration › Items search fields):
a. 1 biblio field linked to a DB field
b. 1 biblio field not linked to a DB field
c. 1 item field linked to a DB field
d. 1 item field not linked to a DB field
2. Make sure you have some data in those fields to search on.
3. Go to item search page and do a search using these new fields, make
sure the result is correct.
Signed-off-by: Nick <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
I don't understand at all the usefulness of $privshelflist and
$privtotshelves in C4::VirtualShelves::Page
They look useless.
If you deep in the git history, you will find
commit 25eb36f21f
Bug #2531 Cannot delete private shelf
I am not able to reproduce this issue after this patch
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Some SQL parameters are added to the wrong side of the list.
This effectively clears all private lists from view :)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
I tried to reuse this package for a new development, I did not manage.
It's a really hard to read and to understand.
Here my first try, this patch only remove the call to _shelf_count in
the GetShelves subroutine.
Someone might want to get this value for another reason and from
somewhere else.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11111 adds a basket group column on the parcel page.
But it seems that the already received orders never contain the value
(always 'no basket group').
Test plan:
Receive an order which is in a basket group and verify the basket group
column is correctly filled.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
For historical reasons the SIPServer and SIP modules
have used an extra module path in addition to the
standard Koha one. This has caused numerous irritants
in attempting to set up scripts and basic tests. It
does not help in attempting to modify or debug
this code
This patch changes the package value in the modules
under the C4/SIP directory and makes calls to
them use the full package name.
Where the export mechanism was being short circuited
routines have been explicitly exported and imported
declarations of 'use ILS' when that module was
not being used and which only generated warnings
have been removed.
As a lot of the changes affect lines where
an object is instantiated with new. The opportunity
has been taken to replace the ambiguous indirect
syntax with the preferred direct call
In intializing ILS the full path is added as this
will not require any changes to existing configs.
I suspect this feature is unused, and adds
obfuscation rather than flexibility but have kept
the feature as we need this change in order to
rationalize and extend the testing of the server.
The visible difference is that with the normal Koha
PERL5LIB setting. Compilation of Modules under C4/SIP
should be successful and not fail with unlocated modules,
allowing developers to see any perl warnings
All the SIP modules can now be run through the tests
in t/00-load.t now except for SIPServer itself
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Koha's SIP server accepts timeout parameters, but those parameters
are only used for the login portion of a telnet transport session.
Other than that, they are ignored, and as long as whatever opened
the connection keeps it open, it will stay open indefinitely.
Test Plan:
1) Set the timeout setting on your SIP server to 10 seconds
2) Modify misc/sip_cli_emulator.pl, add "sleep 100;" directly after line 91
3) Start your SIP server
4) Run the modified sip script with valid parameters
5) Watch the SIP server stderr
6) Note that even though the script waits far too long before continuing,
the SIP server never kills the connection, and the requests the cli
script makes come back with valid data.
7) Apply this patch
8) Restart your SIP server
9) Repeat step 4
10) Note that this time you see "SIP Timed Out!" in the SIP server
stderr and when the script finally makes it's request, it doesn't
come back with valid data.
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This button lets you replace existing authorities using a Z39.50 search.
http://bugs.koha-community.org/show_bug.cgi?id=11961
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A failed login should not leave the user in a half logged authenticated
state, but rather return them to an anonymouse session as per the
pre-login attempt state.
To replicate error:
1. Try to log in with some nonexisting user id or wrong password in the
OPAC
2. Go directly to /opac-user.pl (e.g., enter it in the browser address
bar, or just click on the "Log in" link)
3. Observe a DBI error displayed on the screen
4. You are now in the "deadloop" of sorts (opac/opac-user.pl refuses to
display the login screen, no matter how many times you try to reload
it); to break the deadloop, one needs to:
- remove session cookie from the browser (or cause the session to
expire in some other way - closing browser window would be probably
enough for that)
- remove offending session on the server (from mysql sessions table,
..)
- log in with proper credentials using some other page (like
opac/opac-main.pl right-side panel), which does not involve
opac/opac-user.pl being called without "userid" CGI parameter.
To test:
1. Test as above, the DBI error should no longer be present
2. Check that search history works across failed and sucessful login
attempts
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Add a missing semicolon to the end of a template variable assignment
line. This patch should not affect operation.
Note: With Bug 13499 we did a non-destructive perltidy, as such we only
affected indenting and whitespace to maintain blame history. However, a
number of minor code issues were also highlighted, in this series of
patches I hope to correct other minor style issues.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Removed an uneeded semicolon from the end of an 'if' block. This should
not affect operation of the script.
Note: With Bug 13499 we did a non-destructive perltidy, as such we only
affected indenting and whitespace to maintain blame history. However, a
number of minor code issues were also highlighted, in this series of
patches I hope to correct other minor style issues.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This tidy should only change whitespace and not line breaks, thus
retaining history.
There are no code changes, and thus there should be no regressions to
test for koha wise.
To test the non-destrcutive nature of the patch, run a 'git blame -w' on
the file before and after the patch. The resulting blame should include
a comparabile history of the file, with only some additional blank
lines being attributed to this commit.
A 'git blame -wM' may also be useful for comparison purposes.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
[1] Arrange to have at least one loan in your test database due
one day from now.
[2] Run misc/cronjobs/advance_notices.pl -c -n -v -m=2
and note the number of loans reported.
[3] Apply the patch.
[4] Run misc/cronjobs/advance_notices.pl -c -n -v -m=2 again
and verify that the number of loans reported remains the same.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Also tested with unit tests from bug 10719.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This error only appears when using the SIPServer, it doesn't manifest when using the SIP unit tests
or when using the staff client.
--------------------
------------------
PREPARE THE TEST
------------------
--------------------
0a. Find a borrower.
0b. Find an Item (cardnumber 'debar123') and check-out to the borrower
0c. Find a borrower and add a manual debarrment to it, indefinetely in effect.
This is the default behaviour.
0d. Configure and start a SIP-server which you can access with telnet.
See http://wiki.koha-community.org/wiki/Koha_SIP2_server_setup
In this example, the Borrower defined as the Check-out/in machine has the following credentials:
username: herkules password: palautathan branchcode: JOE_JOE
but you are free to use your own, it doesn't affect this test plan.
0e. access your server with telnet
-----------------------
---------------------
REPLICATE THE ISSUE
---------------------
-----------------------
1. Paste the following SIP-command to login:
9300CNherkules|COpalautathan|CPJOE_JOE|
2. Paste the following SIP-command to check-in the Item of the debarred Borrower:
09N20140721 07501620140721 075016AP|AO|ABdebar123|AC|BIN|
3. The connection should die and in the SIP Server's error log you can find the following error:
Software error: Undefined subroutine &C4::Circulation::HasOverdues called at /home/koha/kohaclone/C4/Circulation.pm line 1925
--------------------
------------------
AFTER THIS PATCH
------------------
--------------------
Redo steps 1-2.
3. No error is given and the connection doesn't die.
No unit tests included and never will, because setting up the test environment would be very tedious.
It is entirely possible but the scaffolding required is beyond the scope of this patch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Note: I did not test this patch with SIP, but I did not find any
regression on checking or renewing an item.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Completely get rid of warns.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test
Hit a url like
cgi-bin/koha/opac-authorities-home.pl?op=do_search&type=opac&operatorc=contains&marclistc=mainentry&and_orc=and&orderby=HeadingAsc&value=FIRECLAY
Notice the warns in the error log
Apply patch
Reload the url
Still works but no warns
(cherry picked from commit c98d805e490a82b2ea9f3d4e0f7278640942ba6d)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Reformatted to fix error M Tompsett spotted
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Instead of 10 warnings, I now have only 4 warnings.
We're going in the right direction.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
git grep FormatData
should not return any result in pl and pm files.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This is empty (?)
Test plan:
git grep 'VirtualShelves::Merge'
should not return anything.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Rochelle <Rochelle_healy@hotmail.com>
http://bugs.koha-community.org/show_bug.cgi?id=12889
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This routine is not used and can be removed.
Test plan:
git grep GetLateIssues
should not return any result
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
TODO:: Somebody who knows what these are about could write some documentation about it.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
C4/Reserves.pm is unreadable with my vim configuration.
It appears I am the only one having this problem.
For an incomprehensible reason, a string constructs with
qq/my string/;
completely breaks the syntax color for all the rest of the file (~2300l).
If I replace it with
qq{my string};
all is fine!
Test plan:
launch
git show HEAD
and verify this patch won't break anything.
Additionally, prove t/db_dependent/Reserves.t
This will trigger the three functions that were modified.
The prove currently fails on test 8, but the other succeeding
tests prove that this change is fine.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass on my installation.
No problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There is no need to encode strings coming from DB.
To reproduce:
go on admin/item_circulation_alerts.pl
The headers contain bad encoded characters.
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Newly introduced by patches from bug 10807, the string was decoded
before to be stored in session.
To reproduce:
Enable history search
Go at the OPAC and log out
Search for something with utf-8
Go on your search history
The search description should be correctly encoded
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The password should be encoded before hashing.
Test plan:
- Before applying the patch, create a user with utf-8 in password
- apply patches
- try to log in
- change the password
- log out
- try to log in
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The search patch should fix non-latin character searches.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
We don't need to decode manually which provide nice performance boost.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce, edit, index notice with utf-8 char and search for it
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test on preferences.pl and on some others pages when mysql is used to
store session.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
See the wiki page for the explanation.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
