This change adds the missing subfields h and x to field 583 for
the detail XSLT in the staff interface.
Test plan:
0. Apply the patch and koha-plack --reload kohadev
1. Go to http://localhost:8081/cgi-bin/koha/cataloguing/addbiblio.pl?biblionumber=29
2. Click on tab "5"
3. Scroll down to 583 and click on "ACTION NOTE" to expand subfields
4. Fill in using the following example:
583 0#$adowngraded$c19910110$hJoe Smith$otitle$xfrom secret FRD to confidential NSI
5. Click "Save"
6. Note that the "Action note" now shows "Joe Smith" and "from secret
FRD to confidentail NSI"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Go to Administration > Did You Mean
2. Attempt to drag and drop plugin options.
--> Confirm that they are not draggable
3. Apply patch and clear browser cache
4. Reload the page
--> Confirm that drag-and-drop now works
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This follow-up patch removes the use of $exit_required_p completely. The sysprefs BlockReturnOfLostItems and BlockReturnOfWithdrawnItems are handled in other scripts, and should not prevent the processing of all returns error messages when enabled.
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This fix ensures that a return claim confirmation always shows, even if
the return of lost items has been blocked by BlockReturnOfLostItems
being enabled.
To test:
1. Set BlockReturnOfLostItems system preference to Block
2. Check out an item to a patron
3. Go to the patrons page and claim a return on the item
4. Check in the item and keep checking in the item. Notice the message
"Item is lost, cannot be checked in." shows every time, but the return
claim message only shows sometimes.
5. Apply the patch and restart services
6. Check in the item and keep checking in the item. Confirm both the
lost message shows and the return claim message shows every time.
7. Confirm the return of the item is still blocked.
Sponsored-by: Pymble Ladies' College
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Verify that you can filter by reset password.
And that the uppercase code is replaced by a description.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Run t/db_dependent/Koha/Patrons.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Added to the call in opac-password-recovery.pl. This allows
differentiating between password change and password reset when
viewing the logs.
Test plan:
Enable BorrowersLog.
Do a password recovery on OPAC.
Check with log viewer for 'RESET PASS' action.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the SelfCheckHelpMessage system preference into HTML
customizations, making it possible to have language- and
library-specific content.
To test you should have some content in the SelfCheckHelpMessage
system preference before applying the patch. Apply the patch, run the
database update process, and rebuild the OPAC CSS.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from SelfCheckHelpMessage is now stored there.
- The HTML customization entry form should offer SelfCheckHelpMessage
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the SelfCheckHelpMessage HTML customization and add unique
content to the "fr-FR" tab.
- Log into the self checkout system and click the "Help" link at the
top.
- On the help page, confirm that the SelfCheckHelpMessage content is
shown there.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"SelfCheckHelpMessage." It should return no results.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We need to add scalar to the calls. These parameters are not meant
to be used as multi_param.
Test plan:
Try With and without this patch on staff:
Try: /cgi-bin/koha/admin/columns_settings.pl
=> WITHOUT: No warnings
=> WITH: Same. No change.
Try: /cgi-bin/koha/admin/columns_settings.pl?module=acqui&page=basket
=> WITHOUT: Opens module, scrolls down. CGI::param called in list context in logfile
=> WITH: Opens module, scrolls down.
Try: /cgi-bin/koha/admin/columns_settings.pl?module=acqui&page=basket&table=orders
=> WITHOUT: Opens module, scrolls down. CGI::param called in list context in logfile
=> WITH: Opens module, scrolls down.
Try: /cgi-bin/koha/admin/columns_settings.pl?module=acqui&module=admin
* Hash like: panel => acqui, admin => page, undef => table, undef => modules, $modules (SHIFTED)
=> WITHOUT: Acqui expanded showing: There is no page using the table configuration in this module.
=> CGI::param warning in log.
=> And: Problem = a value of table has been passed to param without key
=> And: Problem = a value of modules has been passed to param without key
=> WITH: Only the first module (Acqui) should be expanded.
Try: /cgi-bin/koha/admin/columns_settings.pl?module=acqui&module=admin&page=basket&table=orders
* Hash like: panel => acqui, admin => page, basket => table, orders => modules, $modules hash (SHIFTED)
=> WITHOUT: Acqui expanded showing: There is no page using the table configuration in this module.
=> And: CGI param log warning.
=> WITH:: Opens Acqui. Second module ignored. Scrolling.
Try: /cgi-bin/koha/admin/columns_settings.pl?module=admin&module=acqui&page=basket&table=orders
* Hash like: panel => admin, acqui=> page, basket => table, orders => modules, $modules hash (SHIFTED)
=> WITHOUT: Admin expanded showing: There is no page using the table configuration in this module.
=> And: CGI param log warning.
=> WITH: Admin should be expanded (page and table ignored, not in Admin). No scroll.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes some commented out lines and some unnecessary imports. No impact to working code - self signoff
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the SelfCheckInMainUserBlock system preference into
HTML customizations, making it possible to have language- and
library-specific content.
To test you should have some content in the SelfCheckInMainUserBlock
system preference before applying the patch. Apply the patch, run the
database update process, and rebuild the OPAC CSS.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from SelfCheckInMainUserBlock is now stored there.
- The HTML customization entry form should offer
SelfCheckInMainUserBlock as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the SelfCheckInMainUserBlock HTML customization and add unique
content to the "fr-FR" tab.
- Log into the self check-in system and confirm that the
SelfCheckInMainUserBlock content is shown there.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"SelfCheckInMainUserBlock." It should return no results.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the SCOMainUserBlock system preference into HTML
customizations, making it possible to have language- and
library-specific content.
The patch also makes a minor fix to CSS in order to get the "Back to
top" link to show up correctly in self-checkout and self-checkin.
To test you should have some content in the SCOMainUserBlock
system preference before applying the patch. Apply the patch, run the
database update process, and rebuild the OPAC CSS.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from SCOMainUserBlock is now stored there.
- The HTML customization entry form should offer SCOMainUserBlock
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the SCOMainUserBlock HTML customization and add unique
content to the "fr-FR" tab.
- Log into the self checkout system and confirm that the
SCOMainUserBlock content is shown there.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"SCOMainUserBlock." It should return no results.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Removes two occurrences and a commented one.
Test plan:
[1] Go to cataloguing editor. Open dev console. Clone 500.
[2] Go to Admin/Did you mean. Try to toggle options.
With this patch it works. Without this patch, JS errors.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates Flatpickr CSS in the OPAC and staff interface so that
date fields are displayed correctly in iOS mobile views.
To test, apply the patch and rebuild the OPAC and staff interface CSS.
- In the OPAC, click "Create new account"
- In the account entry form, confirm that the date of birth field looks
correct and that the date-picker works as it should.
- In the staff client, go to Patrons -> New patron.
- Check the date of birth field in this form too.
This patch has been tested in the Xcode iOS device simulator with iOS
17. While I wasn't able to reproduce the problem in Firefox, I was able
to use the developer tools' responsive design mode to trigger the mobile
view and thus be able to see the styles which are being applied:
- In the OPAC, on the "Create new account" screen, open the Web
Developer Tools panel (Tools -> Browser tools -> Web Developer Tools).
- Click the "Responsive Design Mode" button in the upper-right corner of
the developer tools panel (it looks like a phone and tablet together).
- The main browser window will now how some settings at the top.
- In the first dropdown, choose an iPhone model.
- The date of birth field should now be styled differently because of
the addition of a "flatpickr-mobile" style.
- Right-click the field and choose "Inspect." In the developer console
you can see the styles which are being applied to the field. One of
those should be ".flatpickr-input.flatpickr-mobile"
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This will now use the centered logic from buildSearchPatronQuery, not only
fixing the original issue of not being considering all the terms in the
search input, but also reusing already established code.
Test plan, k-t-d:
1) Install FreeForm, enable ILLModule sys pref, run:
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev.sh)
2) Create a FreeForm ILL request and input 23529000035676 in the cardnumber, that's "Henry Acevedo".
3) Go back to the ILL list table, input "henry" in the bottom "Patron" filter input and press the "Search" button, notice it fetches the request correctly.
4) Now do the the same search but with "henry acevedo", notice the request is not retrieved.
5) Apply patch. Repeat. Do the same for the "patron" input field and the "keyword" input field.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add table_prefix argument to buildPatronSearchQuery.
This allows the buildPatronSearchQuery function to also perform the search
on a related table, instead of the default patron table.
This is relevant because the query will be performed on the ILL API endpoint,
so the table being searched will have to be prefixed with 'patron.', instead of the
default 'me.'
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Fix the following JS error:
Uncaught TypeError: search_fields.forEach is not a function
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To Test:
1. Place a hold
2. Check-in an item of the held record
3. No hold modal 😱
4. APPLY PATCH
5. Hold modal!!!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Without the fix a second run of the database update would fail.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves form any staff_searchable attribute being automatically
included in the the Standard patron serch, to allowing the librarian to choose.
Current searchable attributes will be marked as 'searched_by_default'
To test:
1 - Add a searchable patron attribute type
2 - Add some values
3 - Confirm they are searched in a 'Standard' patron search
4 - Apply patch
5 - Go to admin - >patron attribute types
6 - Note new 'Searching' column
7 - Confirm attribute is 'Searched by default'
8 - Confirm searches work as before
9 - Edit the attribute type
10 - Uncheck 'searched_by_default'
11 - Save
12 - Confirm attribute not searched in 'Standard' search
13 - Select the attribute in patron search dropdowns
14 - Confirm it is correctly searched
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This enhancement allows libraries to modify an existing orderline and increase the quantity in the order. The quantity is increased by adding more items to the order, through the usual Item for which is visible when adding or modifying an order.
To test:
1. Ensure you have a budget, fund, vendor etc. to use the Acquisitions module
2. Open a new basket. Make sure you do NOT check the 'orders are standing' option
3. Add an order to the basket using any method. Add an item or more to this orderline and save the order to the basket
4. Click Modify to edit the orderline
5. Notice the quantity text field. Try to directly change this number. You'll get an error pop-up and be redirected back to the basket.
6. Apply the patch, restart services, refresh the basket page
7. Click Modify to edit the orderline
8. Notice the item form and Items list table is visible with your existing item(s) for this order. There should be no Action buttons as actions can't be done on an existing item order.
9. Confirm you are able to add more items to the Items list and to the order by filling out the form and clicking 'Add item' as normal. Confirm the quantity increases accordingly.
10. Confirm the Edit and Delete buttons for newly added items work as expected
11. Save and confirm the quantity for the orderline has increased
12. Confirm this behaviour persists with the other methods of adding new orders to a basket
Sponsored-by: Pymble Ladies' College
Signed-off-by: Katariina Hanhisalo <katariina.hanhisalo@xamk.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Perltidy
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the OpacSuppressionMessage system preference into HTML
customizations, making it possible to have language- and library-specific
content.
To test you should have some content in the OpacSuppressionMessage
system preference before applying the patch. Apply the patch and run the
database update process.
- In the staff interface, locate a bibliographic record and open it for
editing.
- Under tab 9, tag 942, change subfield n, "Suppress in OPAC", to "Yes"
and save the record.
- Go to the OPAC and try to navigate directly to the bibliographic
detail page for that record:
/cgi-bin/koha/opac-detail.pl?biblionumber=X
- You should be redirectd to the "Blocked" page. Under the message "You
are not authorized to view this record" you should see the content
which was previously in the OpacSuppressionMessage system preference.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from OpacSuppressionMessage is now stored there.
- The HTML customization entry form should offer OpacSuppressionMessage
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the OpacSuppressionMessage HTML customization and add unique
content to the "fr-FR" tab.
- Go to the OPAC and switch to your updated translation. Try to view
the suppressed record again and confirm that the content you added
for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"OpacSuppression." The description of these preferences should show an
updated message about using HTML customizations to create
OpacSuppressionMessage content.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This makes it more flexible and the slip can be added to the
notice name easily.
For example: In German the slip would usually be part of the word, not separate:
Gebührenquittung (slip = quittung)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This renames the notices and slips module from
Patrons toolbar (slip) to Patrons (custom slip)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Perltidied the section with tabs in printslip.pl
* Fixed indentation and tabs in letter.tt
* Added missing TT filters to members-toolbar.inc
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new module to letters 'patron_slip' / Patrons toolbar
(slip)
This also combines some of the slip printing JS to make things more
direct
To test:
1 - Apply patch
2 - restart_all
3 - yarn build
4 - Confirm you can print slip, summary, quickslip, and checkin slip
when viewing a patron's account
5 - Enable DisplayClearScreenButton syspref, and test that it works
with both values
6 - Go to Tools->Notices and slips
7 - Define a new notice in the 'Patron toolbar (slip)' module
8 - Enter content like below in the 'Print' transport:
Patron has [% borrower.holds.count %] holds
List of holds:
[% FOREACH hold IN borrower.holds %]
===============================
Reserve id: [% hold.reserve_id %]
Title [% hold.biblio.title %]
[% END %]
9 - Go to patron scree
10 - Note new option under 'Print'
11 - Print the new slip and confirm it works (try with and without
placing holds for patron
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the Damaged radio box options ( Ignore, yes, no ) in favor a full damage status search option
To test:
1. APPLY PATCH, restart services.
2. Make sure you mark some items as damaged.
3. Go to the item and search and limit by 'Damaged'
4. You should only see your 'Damaged' items.
5. Export the results as a CSV, make sure the CSV is well-formed and accurate.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Perltidied.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch follows the logic of bug 32166 and adds specific inputs for each order to avoid any misalignment when some records are not imported
To test:
1 - Find a vendor in acquisitions
2 - Create or find an open basket
3 - Add to basket form a new file
4 - Stage file and add to basket
5 - Select the second record in the list
6 - Enter price info
7 - Save (don't forget, you need to set item type in the second tab)
8 - The order has no price info!
9 - Apply patch
10 - Repeat 3-7 above, staging file fresh
11 - Confirm order has correct prices
12 - Test with a file with many records
13 - Confirm any combination of choosing/skipping records works as expected
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch corrects logic in the OPAC self registration confirmation
template so that the right column markup is shown when various
combinations of OpacNav, OpacNavBottom, and OpacNavRight are displayed.
To test, apply the patch and enable the PatronSelfRegistration system
preference, and deactivate the PatronSelfRegistrationVerifyByEmail
preference.
- Go to the OPAC and start the process of registering online.
- Fill in the form and submit it.
- On the registration confirmation page, check that the layout looks
correct.
- Test with the presence of various combinations of OpacNav,
OpacNavBottom, and OpacNavRight HTML customizations.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds Bootstrap classes to the "Add" button on the curbside
administration page, in the "Curbside pickup hours" section. This makes
it consistent with the markup of similar buttons in the interface and
makes it slightly smaller so that it fits better in the form.
To test, apply the patch and make sure the "CurbsidePickup" preference
is enabled.
- Go to Administration -> Curbside pickups.
- Fill out the form, including the "New slot" fields in the "Curbside
pickup hours" section.
- Confirm that the corresponding "Add" button looks correct, and that
it works to add your new slot.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
