All the values different from the ones GetMember returned has been
managed outside of GetMemberDetails.
It looks safe to replace all the occurrences of GetMemberDetails with
GetMember.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This value is not used anywhere
Test plan:
git grep enrolmentperiod| grep -v installer| grep -v translator|vim -
should show you that I am right
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Same as other patches, reservefee is only used in opac-reserve.pl
Test plan;
Set reserve fee for a patron category
Place a hold at the OPAC with one of these patrons.
You must get a message about the reserve fee.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The is_expired value is used in 2 places, let's use
Koha::Patron->is_expired instead.
Test plan:
Depending on the different value of BlockExpiredPatronOpacActions for
the patron category, a patron must be blocked if he has expired.
Confirm that behavior from opac-renew and opac-reserve scripts
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Same as authflags, a flags key is set containing all the patron flags.
It is only used in a few places and it's better to call
C4::Members::patronflags when we need it.
Test plan:
Look at the diff and confirm that the change make sense
Use git grep to confirm we do not use the flags somewhere else.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The amountoutstanding value set by GetMemberDetails was only used in a
few places. In that case it makes sense to only retrieve it when needed.
Test plan:
1/ Add fines to a patron, on the OPAC patron info page, you should see a
"Fines" tab
2/ Add credit to a patron, you should see the credit displayed
3/ Set the pref maxoutstanding to 3
4/ Add a fine of 4 to a patron
5/ Try to place an hold for this patron
=> You should get a "too much oweing" message
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This script is not used from the Koha codebase and does not seem very
useful.
We could rewrite it if needed later (ie. if someone complains I will
rewrite it).
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
GetMemberDetails create a authflags key, but this key is only used from
2 different places.
One is a very simple script, which does not seem very usefull
C4/SIP/interactive_members_dump.pl. I propose to simply remove it.
The other one is the member-flags.pl script. What is done in this one is
a bit weird since we a doing twice the same query (it was not highlighted
before this patch). We will need to fix that later.
At the moment the goal it to remove the GetMemberDetails subroutine
without introducing any regressions (and so without adding big changes)
Test plan:
Select/unselect permissions for a patron, save and edit again.
The behavior of the permission checkboxes should be ok
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The correct way to get the value of BlockExpiredPatronOpacActions from a
patron object is to get the patron category then call the
effective_BlockExpiredPatronOpacActions:
$patron->category->effective_BlockExpiredPatronOpacActions
So this patch applies this change and remove this value from the
GetMemberDetails subroutine.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This method will be convenient when moving code to Koha::Patrons
Test plan:
prove t/db_dependent/Koha/Patrons.t
should return green
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
As said in the previous commit, I considered SetAge as unnecessary and
removed it.
Test plan:
1/ Edit a patron using the different 'Edit' links
2/ Play with the patron category limited to age ranges, and date of
birth
3/ You should get the expected warning if the date of birth is inside
the patron category date range.
To finish:
prove t/Circulation/AgeRestrictionMarkers.t t/db_dependent/Reserves.t \
t/db_dependent/Koha/Patrons.t t/db_dependent/Members.t
should return green
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The SetAge and GetAge test coverage are excessive.
First the SetAge subroutine was only created for testing purpose.
The goal of GetAge is quite simple and it seems quite easy to provide
corect test coverage using DateTime->add using negative numbers.
Edit: rebased so it applies
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Converts item plugins to new style (with builder and launcher).
See also bugs 10480 and 13437.
The following plugins have been adjusted:
barcode_manual.pl
barcode.pl
callnumber-KU.pl
callnumber.pl
cn_browser.pl (Added license statement too)
dateaccessioned.pl
macles.pl
stocknumberam123.pl
stocknumberAV.pl
stocknumber.pl
Test plan:
Connect the plugin to an item field.
Verify that the plugin still works.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested if all plugins compile okay.
Ran most of them thru FrameworkPlugin.t.
Tested them in the item editor.
Note: the form for macles.pl comes up, further hard to test.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
0) apply the patch
1) turn on checking previously checkouts - syspref CheckPrevCheckout
2) checkout an item to borrower
3) check the item in and check it out again, you should see the
dialog, with information that the current item was previously checked
out to this patron. With this patch, the information includes title and
author of the item
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch alters the header and footer include files so that JavaScript
can be included in either one or the other. As a proof of concept, the
staff client home page is updated to include JS in the footer instead
of the header.
The processing of JavaScript included on individual pages can now be
similar to how it is done in the OPAC. A block is created with the
page's JavaScript which is then processed in js_includes.inc in the
correct order, after other required js assets.
On pages which have been modified to allow JavaScript to be moved to the
footer you must add a variable to the template: [% SET footerjs = 1 %].
Eventually all staff client templates should be modified so that setting
a flag is not required.
"[% MACRO jsinclude BLOCK %]" is used instead of "[% BLOCK %]" and "[%
PROCESS %]" because MACRO allows the template directives to be
processed correctly when included by intranet-bottom.inc.
To test, apply the patch and view the staff client home page.
- Confirm that you get a confirmation when deleting a news item from the
home page.
- Enable the CircAutocompl system preference and test that patron
autocomplete works from the "Check out" tab from the staff home page
and from other pages where the "Check out" tab is present.
- Test that JavaScript is working correctly on other pages like
Circulation, Preferences, etc.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Due to the fact that the lost and damaged status are contained within the due_due span,
when the item is renewed or returned these statuses disappear.
Some librarians find this disconcerting and it seems that it would be better to keep the visible.
Test Plan:
1) Find a lost item checked out to a patron
2) Renew that lost item via the checkouts table
3) Notice the lost status disappears from that row
4) Apply this patch
5) Refresh the page ( you may want to clear your browser cache as well )
6) Renew the item again
7) The lost status should remain visible!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Edie Discher <edischer@cityoffargo.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
0) Apply the patch and restart memcached + koha-common services if
needed
1) Go to adminitration -> Configure columns and confirm there is new
table configuration with id=account-fines in Patrons section available
2) play with table setting to ensure it works as expected
3) go to to boraccount page for some patron with both fines - payed and
owed
4) Note there is new button "Columns visibility" in top paginator panel,
try to use it
5) Play with the datatable, sort filter and so on
Signed-off-by: Radek Šiman <rbit@rbit.cz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch sues the existing plugin
Koha::Template::Plugin::Biblio->HoldsCount
To be consistent with current behaviour 'Holds (0)' is shown when
no holds have been placed on an item
To test:
1 - Search in staff
2 - Note holds link has no extra information
3 - Apply patch
4 - prove -v t/db_dependent/Template/Plugin/Holds.t
5 - Do search in staff that returns records with some holds (i.e. place
some holds)
6 - Note the number of holds now displays next to the text of the link:
Holds (#)
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Adding POD, changing the config files to live in a path pointed to by
koha-conf.xml
This means multiple instances can have their own config
Please test the 2 patches together
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Works as advertised. Arbitrary arguments can be passed to SMS:Send
drivers. If an argument is provided that has already been set by
SMS::Send or the driver, it will be overwritten by the value from
the YAML file. My only suggestion for an improvement would be an
example of what the YAML should look like, but that is a minor thing.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
C4::SMS::send_sms now reads a YAML file and pass all parameters in the
file to SMS::Send::new.
The config file is read in <installdir>/etc/sms/driver/<driver>.yaml.
For instance, if the driver used is SMS::Send::UK::Kapow, the config
file has to be in <installdir>/etc/sms/driver/UK/Kapow.yaml
A underscore character is prepended to all parameter names so they are
treated as driver-specific options (leading underscore must not appear
in config file).
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
opac-account.pl does not include the login branchcode, whereas the other pages
available to users (opac-user, opac-memberentry, opac-passwd, opac-readingrecord,
opac-suggestions, opac-messaging, opac-shelves, etc.) on login DO provide
the login branchcode. Having the login branchcode available on opac-account.pl
would facilitate customization of the OPAC for individual branches.
To test:
1) Login to the OPAC and open /cgi-bin/koha/opac-account.pl
2) Inspect the body tag and observe the class attribute does not include
the login branchcode.
3) Apply the patch.
4) Repeat step 2.
5) Observe that the login branchcode is present.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Yes, we are fixing these four typos here.
Test plan:
[1] Read the changes.
[2] Run t/Auth_with_shibboleth.t
[3] Run git grep recieved| grep -v -e 'recievedlist' | grep -v -e 'serials-recieve.tt'
Note: serials-recieve.tt is just history. Bonus points for the one who makes
us get rid of that column recievedlist.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
EDIT:
Rebased. Change in Accounts has been corrected already.
Removed the po file.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes Zebra index the 648$9 link for chronological terms on
bibliographic records. This way an authority search on chronological terms
will show the right number in 'Used in X records' message.
To test:
- Have a record with a 648 field, linked to an authority record (i.e. with an authid on 648$9).
- Search for the record, notice it is indexed.
- Perform an authority search for the chronological term
=> FAIL: the term is linked to our record, but koha shows '0' count.
- Apply the patch
- Run:
$ cd kohaclone
$ xsltproc etc/zebra/xsl/koha-indexdefs-to-zebra.xsl \
etc/zebradb/marc_defs/marc21/biblios/biblio-koha-indexdefs.xml \
> etc/zebradb/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl
$ git diff
=> SUCCESS: Notice the shipped etc/zebradb/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl
is up-to-date
- Run:
$ sudo cp etc/zebradb/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl \
/etc/koha/zebradb/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl
$ sudo koha-restart-zebra kohadev
$ sudo koha-rebuild-zebra -f -b -v kohadev
- Search for the record, notice it is indexed.
- Perform an authority search for the chronological term
=> SUCCESS: the term is linked to our record, usage count is 1
- Sign off :-D
I assume NORMARC is similar on this regard. Feel free to fail it if the NORMARC part of the
patch is wrong.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
See also bug 17733. As long as we have no FK, these invalid guarantorid's
can make tests fail.
Adding a sql statement to clear them in the beginning of the test.
Test plan:
[1] Since it seems that AUTO_INC+8, +9 and +10 may fail one or two tests,
we should manipulate one or two borrowers:
Run this SQL query first:
SELECT `AUTO_INCREMENT` FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_SCHEMA = '[your database]' and table_name='borrowers';
Now run: UPDATE borrowers SET guarantorid=[former value + 8] WHERE borrowernumber=[some existing borrowernumber]
[2] Without this patch, run Members.t. Should fail two tests.
[3] Apply the patch. Fetch the new AUTO_INCREMENT value and update
guarantorid accordingly again for the manipulated borrower.
[4] Run the test. It should not fail.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Fixes a small typo introduced by Bug 17010
waitingreserves.p#[% tab %]
should be
waitingreserves.pl#[% tab %]
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In some dirty DB (Jenkins), the borrowers.guarantorid field is not set
to a valid patron id.
That make some tests fail if we create a patron with that patron id.
In my DB, auto increment for borrowers is set to 52 before the tests
On the 4th run of the tests, some tests fail.
Before I got a patron with a guarantorid=112 (I let you do the math).
Test plan:
The easiest is to trust me
Todo: Add a FK!
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Opened a new report for special case: Bug 17759.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Not optional since we are 'using' it in updatedatabase.pl.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This reverts commit 7ac1bc3537.
On a kohadevbox:
Error flock (1) on
'/home/vagrant/kohaclone/installer/data/mysql/atomicupdate/bug_xxxx.perl':
No locks available at installer/data/mysql/updatedatabase.pl line 13637.
This is because Path::Tiny->slurp[_utf8] uses flocks which does not work
with NFS
Test plan:
Execute a .perl atomic update file on a kohadevbox
=> Without this patch you should get the flock error
=> With this patch the update should work fine
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch implements the notices toggle event using a different method.
Using on() lets us bind the event to a parent element, allowing the
event to attach to elements which may not exist on the page yet.
Test plan the same as original patch:
1) have a patron with more then 20 notices sent
2) go to patron profile -> notices
-> without patch, the showing/hidding of notices content does work
correctly only on first loaded page
-> with patch, it should work correctly everywhere - try to use
paginator, searching, ordering....
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When a patron had overdues on items from different branches
he received from each corresponding branch a notice claiming
the complete list of these items.
Signed-off-by: sbujam <sbujam@users.noreply.github.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The subroutine C4::Members::GetHideLostItemsPreference can easily be
replaced with Koha::Patron->find(42)->category->hidelostitems
Test plan:
Create 2 patron categories, 1 with "Lost items in staff client" set to
"shown" and another one to "Hidden by default"
Create 2 patrons using them
On the result search page, the detail page of a record, the item list
page and the page to place a hold, make sure the lost items are
shown/hidden as expected
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Perform an item search
2 - Note you now have a link to output to csv
3 - Click that link
4 - Page should not change and you should recieve a csv
5 - Ensure nothing breaks
6 - Sign off
High five!
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In order to prepare to move staff client javascript assets into the
footer, this patch creates a new include file containing all <script>
content. This change should have no visible effect on how pages are
generated.
To test, apply the patch and view various pages in the staff client
(ciruclation, preferences, etc) to confirm that JavaScript is working
correctly.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We can solve the minor problem reported on 15906 now by using the
accountlines_id parameter of this report.
Test plan:
[1] Add two manual fines (say 20 and 30).
[2] Pay the second one in full, and check that the first one is not paid
first. So the 20 should remain and not the 30 with 20 outstanding.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is the second patch in a series to unify all payment functions into
a single mathod
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Accounts.t
3) Test fine payment via the "Pay" button
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Followed test plan, works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The amount in accountlines should be saved as a negative amount, but
amount outstanding is correct.
Note: This routine is actually used only once (in paycollect.pl). And is
only cosmetically tested in Accounts.t.
Test plan:
[1] Create a manual invoice, Fine, say 20.
[2] Click on the Pay button next to this fine, and pay 1.
[3] Pay again, using 'Pay amount' button, and pay 2.
[4] Pay again, using 'Pay' on the same line, the full remaining amount.
[5] Verify that you see -1, -2 and -17 on the Accounts tab.
[6] Run t/db_dependent/Accounts.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Apply this patch
2) Make a payment in full using the "Pay" button
3) Note payment succeeds
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes t/db_dependent/PatronLists.t run inside a transaction.
It also makes it generate its own data using t::lib::TestBuilder instead
of relying on sample patrons on the DB.
To test:
- Run:
$ prove t/db_dependent/PatronLists.t
=> SUCCESS: Tests pass
- Apply the patch
- Run:
$ prove t/db_dependent/PatronLists.t
=> SUCCESS: Tests pass
- Sign off :-D
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tax rates are stored in decimal(6,4) fields which means that 4 decimals
are allowed.
If a tax rate is 8.42%, it is stored as 0.0842
If a tax rate has more precision than that, Koha won't deal correctly
with it. We will need to update the DB structure.
With this patch, the tax rate will be displayed with the same precision
as in the DB. So if you enter 8.42, you will see 8.42% instead of 8.4%
without this patch.
Test plan:
Do a full acquisition workflow with a tax rate like 8.42% and confirm
that it is correctly displayed.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This typo has been introduced by
commit eed14b080d
Bug 13001: Refactor VAT and price calculation - parcel page
So before the tax rewrite (13321, 13323).
It sounded weird to me that testers did not catch the bug on this page.
To understand the logic:
Conditions are listincgst, invoiceincgst
Conditions | Before this patch | If we fix the typo | After this patch
0 0 | excluded | excluded | excluded
0 1 | included | included | included
1 0 | excluded | excluded | excluded
1 1 | included | included | included
Test plan:
Create 4 vendors with the difference combinations
Create a basket, add an order (with a tax) and receive it
Confirm that the different values displayed on the parcel page are correct
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The calls
output_pref({ dt => dt_from_string( $date ) })
are wrong and should be replaced with
output_pref({ str => $date })
For better error handling.
Here we fix the problem of items.onloan when searching
Test plan:
- Set items.onloan=0000-00-00 (UPDATE items SET onloan='0000-00-00')
This can come from old data or bad migration
- Execute a search
=> Without this patch you get
Can't locate object method "ymd" via package "dateonly" (perhaps you forgot to load "dateonly"?) at /home/vagrant/kohaclone/Koha/DateUtils.pm line 225.
=> With this patch you won't get the error
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Using a DateTime object with a timezone of America/Santiago
was causing fatal errors for Koha::Calendar->is_holiday
and Koha::Calendar->exception_holidays, when the objects
were truncated to an invalid local time.
Using a floating zone allows us to use the same day, month, year
for comparison purposes without running into the possibility of
creating an invalid local time and thus a fatal software error.
Edit:
While the changes to is_holiday and single_holiday make sense (Jonathan agrees too)
I didn't manage to have them fail, because truncate is not failing in my trials, but
days_between. So to me, it narrows down to have exception_holiday return floating tz
datetime objects so it doesn't break days_between.
Anyway, it is ok to push this patch, and the regression test I provide covers this scenario
I'm describing.
To test:
- Apply the regression tests patch
- Run:
$ prove t/db_dependent/Holidays.t
=> FAIL: Unexpected error due to bad timezone/date combination
- Apply this patch
- Run:
$ prove t/db_dependent/Holidays.t
=> SUCCESS: Tests pass
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch introduces a regression test for exception_holidays. This routine
returns a list of datetimes to be used in date comparison and some datetimes don't exist
in some timezones, so floating timezones should be used instead.
To test:
- Apply the patch on master
- Run:
$ prove t/db_dependent/Holidays.t
=> FAIL: The new test fails
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
