A minor change in the GetMarcAuthors function of C4/Biblio.pm allow differentiate the type of authors in the templates
This change allow doing things like this in the templates:
<TMPL_IF EXPR="tag == 700" && code eq 'a' >
<strong>Author:</strong>
<!-- TMPL_ELSE -->
<TMPL_IF EXPR="tag == 710" && code eq 'a' >
<strong>Corpotation Author:</strong>
<!-- /TMPL_IF -->
<!-- /TMPL_IF -->
(html template syntax, but also applicable to template toolkit)
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Works as claimed and doesn't break existing functionality.
Prevent disabled funds to appear in the Fund
select box.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Before this patch : 9619 borrowers added in 31 Minutes, After : 68 seconds.
This adds Hashref to table structure in C4::SQLHelper to speed up bulk edits.
Signed-off-by: Stéphane Delaune <stephane.delaune@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Not sure the brackets are nessecary, but I think I remember learning
bitwise operators have a lower priority than other relational
operators so wanted to make sure we notted the result of the bitwise
and, not the flag
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch makes these flags functionnal.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
HidePatronName wasn't being respected on a titles Checkout History tab. This patch
exports the preference to the template (if set), and then toggles the display between
patron cardnumber (if 'on') or the name (if 'off')
To test:
Enable HidePatronName
Go to the Checkout History tab of an item that has been checked out before
You should see the patron's cardnumber instead of their surname, firstname
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
To test:
apply patch
check menus on circulation and bib detail page - corners on the menus to the left should be rounded.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Those rounded corners do look more friendly. I have tested circulation and bib detail page and
have found no ill side effects.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The notes for a specific hold, if they existed, were being added to the tmp_holdsqueue
table by build_holds_queue.pl, but they were not displayed anywhere, which seems a waste.
This patch adds the Notes column to the far right of view_holdsqueue.pl.
To Test:
Place a hold with a note
Run build_holds_queue.pl to place it in the Holds Queue
View the Holds Queue; you should see the note on the far right of the table
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The cataloger-supplied translated title stored in MARC21 field 242 was not being
displayed when XSLT was enabled.
Test plan:
1) Enable XSLT for OPAC Details and Results, and Intranet Details.
2) Create or add a record with a 242 field
3) See that the translated title is not displayed in OPAC Details or Results, or
Intranet Details
4) Apply patch
5) See that the translated title is now displayed in OPAC Details and Results,
and Intranet Details
Signed-off-by: Duncan Tyler <duncan@duncan-SoT.wgtn.cat-it.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The new framework will be called "Hurtigkatalogisering".
To test:
- Make sure the nb-NO translation is installed
- Run through the web installer on an empty database
- Select nb-NO as the installation language
- Select NORMARC as the marcflavour
- Include normarc_fastadd_framework in the installed data
- Check that the framework looks ok in:
-- More > Cataloguing
-- More > Administration > MARC framework
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, not problems found.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adds comma and space to results display in opac between title and subtitles.
Also removes extra space before the subtitle in the results display of the staff pac.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Fixed problems:
- only $z, but not $a was shown
- only first $z for each 866 field was shown
- each 866 field produced a ; even if no $z was present
After patch was applied:
- OPAC displays 866 $a and $z, separating each field with ;
- Staff displays 866 $a, $x and $z, separating each field with ;
Example(s) for testing:
866 $a1-86 (1941-1987)$xbound in 2 v. per year$zSome issues missing
866 $a1-86 (1941-1987)
866 $a--86 (1941-1897)$xinternal note
866 $zfirst note,$zsecond note
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch eliminates all unchanged fields from the email
on the assumption that the information is superfluous. I have
also added a link to the patron edit screen which will be
displayed if the staffClientBaseURL has been entered.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Currently, -v option resets Zebra log output to default system values.
This produce amount of log specified in system defaults which is usually
too low for debugging.
This change explicitly forces all Zebra log output which create much more
chatter so it triggers with verbosity level 2
Test scenario:
1. pick koha site to reindex
2. use -v -v options to rebuild_zebra.pl to see additional output
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Verified help corrections and loglevel 2 output vs. loglevel 1 output. No issues found.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The full title of a serial is now displayed even
if several lines have the same title.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The original patch for 5533 removed the Lost status from the edit items screen; new items were not affected,
and batch changes could still be made, so this was not a consistent change.
This patch removes the filter that hid the Lost status dropdown, but then changes the default MARC framework
to hide this field by default (value -5). New installations will not see this status in the editor, unless
they manually activate it. This will enforce the semantics of using the "mark lost" options by default, but
provide a workaround for libraries that understand and accept the consequences of manually editing this field.
To test:
1. on an existing install, edit an item. you should have the Lost status visible
2. on a new install, editing or creating an item should not show the Lost status at all
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
HidePatronName was not working on 'on hold for' messages, only 'checked out to'
messages. This resulted in the patrons name showing if the item was on hold for
them.
T:T scope issue; needs to be within itemloo. This patch does that.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
perl t/db_dependent/BackgroundJob.t
All tests complete successfully.
Note: Test 11 does not tell what it's about, but it has been there before.
TransformKohaToMarc function is called for each biblio and item that has
to be build. This function execute a DB statement for each Koha field
that has to be mapped to a MARC tag/letter. This impact deeply
performances for script like rebuild_zebra, especially since items are
not anymore in bilio records and have to be rebuild on the fly.
I'm proposing a patch which read Koha field to MARC field mapping just
one time and cache it. My test show a 30% execution time improvement on
rebuild_zebra.pl script. It uses already cached mapping in C4::Context.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
http://bugs.koha-community.org/show_bug.cgi?id=6990
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Some paths to the FA item-add screen didn't have a branch defined--if the param is set,
use it, otherwise, use the user's logged in branch.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Modified for syntax by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
This reverts commit 6f681bec2d.
Reverting because on my test server, I get
syntax error at /home/paul/koha.dev/koha-community/cataloguing/additem.pl line
668, near "->param{"
Execution of /home/paul/koha.dev/koha-community/cataloguing/additem.pl aborted
due to compilation errors.
Some paths to the FA item-add screen didn't have a branch defined--if the param is set,
use it, otherwise, use the user's logged in branch.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The search was only looking for bib level itypes independent
from the settings for item-level_itypes.
After patch the system preference setting is respected
and search works accordingly.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch lets cleanup_database also purge older records from the (five) import tables and the action_logs table.
Two new command line parameters are introduced: --import and --logs.
If no number of days is specified for --zebraqueue, --import or --logs, it defaults to 30 days, 60 days resp. 180 days.
I did not add a default for --sessdays, because this parameter cannot be seen separately from parameter --sessions.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds new parameters and code, does not change existing behaviour
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Corrects typo in list of flags; was DEBARRED, but the actual name of the flag is
DBARRED (for some reason)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Outputting the "raw" ISBN. In the case of multiples, ISBNs
are concatenated with " | " Using a T:T filter to make these
a comma-separated list.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Added a record and confirmed that the right ISBN shows on the
search results and that the amazon cover image still works.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Getting a list in CSV format was impossible because the
shelfid parameter was empty in the URL.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
