This patch makes the tests use t::lib::TestBuilder instead of
hardcoding values.
Test plan:
- Run:
$ prove t/db_dependent/Circulation/issue.t
=> SUCCESS: All tests return green with and without the patch
- Sign off :-D
Sponsored-by: ByWater Solutions
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes t/db_dependent/Circulation/issue.t create
good sample data for its tests. It does so by creating a random
itemtype.
To test:
- Run
$ prove t/db_dependent/Circulation/issue.t
=> FAIL: lots of warnings about "item-level_itypes set but no itemtype
set for item"
- Apply the patch
- Run:
$ prove t/db_dependent/Circulation/issue.t
=> SUCCESS: Tests are green, and no warnings.
- Sign off :-D
Sponsored-by: ByWater Solutions
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds tests for C4::Circulation::AddReturn(). Both tests are wrapped
inside a subtest, and look for AddReturn storing the right itemtype on the
'statistics' table.
Note: It also refactors the file a bit, to avoid side effects. And uses TestBuilder
to make it independent on already-present db data. It also removes warnings by mocking
C4::Context::userenv
To test:
- Apply the patch
- Run the tests:
$ prove t/db_dependent/Circulation/Returns.t
=> FAIL: Tests fail bacause AddReturn is not storing the itemtype
- Sign off :-D
Sponsored-by: Universidad Empresarial Siglo 21
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes MarkIssueReturned.t use t::lib::TestBuilder to create
the data it needs.
To test:
- On master, have a category with categorycode = C
- Run:
$ prove t/db_dependent/Circulation/MarkIssueReturned.t
=> FAIL: primary key problems make the tests fail
- Apply the patch
- Run:
$ prove t/db_dependent/Circulation/MarkIssueReturned.t
=> SUCCESS: Tests are green!
- Sign off :-D
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Same as previous patch but if another circ rule exists
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In the case on-site checkouts are considered as a regular checkout in issuing
rules (i.e. ConsiderOnSiteCheckoutsAsNormalCheckouts is on):
When after the on-site checkout the maximum limit of checkouts is
reached and the patron wants to switch an on-site checkout to a regular
checkout, the C4::Circulation::TooMany subroutine will return a
TOO_MANY_CHECKOUTS error.
To avoid that, we need to allow an extra checkout in this subroutine.
Test plan:
0/ Switch ConsiderOnSiteCheckoutsAsNormalCheckouts and
SwitchOnSiteCheckouts on
1/ In the issuing rules, set the total number of checkouts (maxissueqty)
to 2 and the number of on-site checkouts to 2 (maxonsiteissueqty)
2/ Check 2 items out ticking the 'on-site checkout' checkbox
3/ Check one of these items out, to automatically switch it to a regular
checkout
=> The checkout should be allowed.
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Use case: A patron checks some items out on-site and want to take it home.
To facilitate the librarian work the checkout is directly switched from
on-site to regular when checked out if the new pref SwitchOnSiteCheckouts is on.
Test plan:
0/ Let the new pref SwitchOnSiteCheckouts off
1/ Checkout one items to a patron and tick the "on-site checkout"
checkbox
2/ Check the same item out without ticking the "on-site checkout"
checkbox
=> You should get "This item can not be renewed, it's an on-site checkout"
3/ Switch the pref on
4/ Repeat 2
=> The on-site checkout should be automatically switched to a regular checkout
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
With small changes to apply to master.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Category module contained only 1 method to return the patron
categories available for the logged in user.
The new method Koha::Patron::Categories->search_limited does exactly the
same thing (see tests) and must be used in place of it.
Test plan:
- Same prerequisite as before
For the following pages, you should not see patron categories limited to
other libraries.
- On the 'Item circulation alerts' admin page
(admin/item_circulation_alerts.pl), modify the settings for check-in
and checkout (NOTE: Should not we display all patron categories on
this page? If yes, it must be done in another bug report to ease
backporting it).
- Search for patrons in the admin (budget) and acquisition (order) module.
- On the patron home page (search form in the header)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Remove $dbh as argument to C4::Items::DelItemCheck
and C4::Items::ItemSafeToDelete, also change all
calls to these functions throughout the codebase.
Also remove remaining reference to 'do_not_commit' in
t/db_dependent/Items_DelItemCheck.t
Fixed doubled "$$" in C4/ImportBatch.pm
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Resolves:
Failed test 'Patron cannot check out item due to debt for guarantee'
at t/db_dependent/Circulation/NoIssuesChargeGuarantees.t line 63.
got: '10'
expected: '10.00'
Test plan:
Run the test again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Accounts.t: Only added a line that ensures the MPL branch exists.
AnonymiseIssueHistory.t: Only add a branch to work with.
Barcodes.t: Replaced clear with delete_all.
CalcFine.t: Remove default issuing rule and add one instead of updating.
Holds.t: Add category S in case it would not exist.
Members.t: Replaced clear with delete_all.
MoveItemFromBiblio.t: Replace last _fk construction.
Test plan:
Run these tests. (See note).
Git grep for only_fk, {_fk} and TestBuilder::default_value.
Note: Holds.t does not pass. Tests 9 and 39 fail, but they did already.
not ok 9 - GetReservesFromItemnumber should return a valid borrowernumber
not ok 39 - Test AlterPriority(), move to bottom
So this test needs attention, but on another report please :)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Resolves:
Failed test 'GetBranchitem returns holdallowed and return branch'
at t/db_dependent/Circulation/Branch.t line 226.
Structures begin differing at:
$got->{hold_fulfillment_policy} = 'any'
$expected->{hold_fulfillment_policy} = Does not exist
Failed test 'Without parameters GetBranchItemRule returns the values in default_circ_rules'
at t/db_dependent/Circulation/Branch.t line 234.
Structures begin differing at:
$got->{hold_fulfillment_policy} = 'any'
$expected->{hold_fulfillment_policy} = Does not exist
Failed test 'With only a branchcode GetBranchItemRule returns values in default_branch_circ_rules'
at t/db_dependent/Circulation/Branch.t line 239.
Structures begin differing at:
$got->{hold_fulfillment_policy} = 'any'
$expected->{hold_fulfillment_policy} = Does not exist
Failed test 'With only one parametern GetBranchItemRule returns default values'
at t/db_dependent/Circulation/Branch.t line 244.
Structures begin differing at:
$got->{hold_fulfillment_policy} = 'any'
$expected->{hold_fulfillment_policy} = Does not exist
Test plan:
Run test before and after applying this patch.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Note: I do not see the usefulness of the lazy_any variable, I don't
think it make things easier to read.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This enhancment allows a library to prevent patrons from checking out
items if his or her guarantees own too much.
Test Plan:
1) Apply this patch
2) Find or create a patron with a guarantor
3) Add a fine to the patron's account
4) Set the new system preference NoIssuesChargeGuarantees to be less
than the amount owed by the patron
4) Attempt to check out an item to the guarantor, you will either
be warned or prevented from checking out based on your system
settings.
Signed-off-by: Cathi Wiggin <CWIGGINS@arcadiaca.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the tests create better data for them:
- Run
$ prove t/db_dependent/Circulation_Branch.t
=> FAIL: Warnings raised
- Apply the patch
- Run
$ prove t/db_dependent/Circulation_Branch.t
=> SUCCESS: No warnings raised
- Sign off
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Test pass successful
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
This patch tries to reorganise test files in the db_dependent directory:
- Circulation_Branch.t has been moved to Circulation/Branch.t
- Circulation_issuingrules.t has been moved to Circulation/CalcDateDue.t
- Circulation_Issuingrule.t has been moved to Circulation/GetHardDueDate.t
- Circulation_dateexpiry.t has been moved to Circulation/dateexpiry.t
- Circulation_issue.t has been moved to Circulation/issue.t
- Circulation_transfers.t has been moved to Circulation/transfers.t
- Items_DelItem.t has been moved to Items/DelItem.t
- BiblioObject.t has been moved to Koha/Biblio.t
- Members_Attributes.t has been moved to Members/Attributes.t
- Members_columns.t has been moved to Members/columns.t
- Circulation_OfflineOperation.t has been moved to Circulation/OfflineOperation.t
- Koha_template_plugin_KohaDates.t has been moved to Template/Plugin/KohaDates.t
- Koha_template_plugin_Branches.t has been moved to Template/Plugin/Branches.t
- Reports/Guided.t, ReportsGuided.t and Reports_Guided.t have been
merged
Test plan:
Confirm that all the modified tests still pass
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
Unless in t/db_dependent/Context.t where we want to test the cache
behaviors.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The 'borrower' should not be used anymore, especially for new code.
This patch move files and rename variables newly pushed (i.e. in the Koha
namespace).
Test plan:
1/
git grep Koha::Borrower
should not return code in use.
2/
Prove the different modified test files
3/ Do some clicks in the member^Wpatron module to be sure there is not
an obvious error.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. Tested with Circulation, Members/Patrons, Discharge,
Restrictions modules and the must common functionalities
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This subroutine was only used in tests to add/update a library.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Currently if the AnonymousPatron system preference is in use, all patron
data is anonymized. Some libraries would like to be able to see the last
patron who returned out an item ( in case of damage ) but still keep all
other patrons anonymized.
* Add the table items_last_borrower ( id, itemnumber, borrowernumber )
* Add new system preference StoreLastBorrower
* If StoreLastBorrower is enabled, upon checkin have Koha insert into
this table the patron who last returned this item. Replace existing
row based on itemnumber if exists.
* If table has a row for a given item, link to the patron from the item
details page.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Enable StoreLastBorrower
4) Issue an item to a patron and return said item
5) Issue the same item to a second patron, do not return it.
6) View moredetail.pl for the given bib, find the given item. There
should be a new field in the history list 'Last returned by' with a link
to the last patron to return the item.
Optionally, you can also verify this works even if patron issuing
history has been set to anonymize issues upon return.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jen DeMuth <JDeMuth@roseville.ca.us>
Signed-off-by: Tom Misilo <misilot@fit.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch adds the ability to set the maximum fine for a given item to
its replacement price ( assuming the replacement price is set ). If
overduefinescap is also set, the fine will be the lesser of the two, if
both apply to the given overdue checkout.
To enable this new limit, create or edit your circulation rules and
check the checkbox for "Cap fines at replacement price"
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Pick an item, and set it's replacement price to 3.99
4) Edit the circulation rule that would apply to this item
and the patron you will check it out to.
5) Check out the item to the patron, and backdate the due date
such that the fine generated would be more than 3.99
6) Enable CalculateFinesOnReturn
7) Return the item, and view the fine generated, it should be 3.99
Signed-off-by: Cindy Murdock Ames <cmurdock@ccfls.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch refactors t/db_dependent/Circulation/GetTopIssues.t so it
creates its own data with random values. It does so by replacing (legacy)
SQL inserts and fixed value data inserting by TestBuilder generated data.
There is no expected behaviour change.
To test:
- Create an itemtyp directly on your DB with GTI_I_TEST as its itemtype
> INSERT INTO itemtypes (itemtype) VALUES ('GTI_I_TEST');
- Run:
$ prove t/db_dependent/Circulation/GetTopIssues.t
=> FAIL: The insert line fails
- Apply the patch
- Run:
$ prove t/db_dependent/Circulation/GetTopIssues.t
=> SUCCESS: tests pass due to random data usage.
- Sign off
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Test plan produces the expected result, failing, then OK.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
create_biblio was returning biblioitemnumber instead of biblionumber.
This can cause problems when biblionumber and biblioitemnumber are not
the same.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Tests assume that the branchcodes CPL/MPL/etc. already exist in the DB.
If they need them, they should create them.
Test plan:
Execute the differente test files on a DB without any branchcode or
at least without CPL/MPL branches.
Confirm that the tests pass.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This trivial patch introduces the code needed on the test files so they handle
the DB transaction instead of relying on the (removed) transaction started/rolled back
by TestBuilder.
Tested all of the files before and after applying the patch, resultes are the same.
(Pass exept of t/db_dependent/Barcodes_ValueBuilder.t, this has the same error).
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
With this patch, the user will know why the checkout is refused.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch set adds the ability to defined independent quotas for on-site
checkouts.
This will be done using the circulation rules matrix where a new column
“Current on-site checkouts allow” will be added.
This feature is going to use the same method as the existing fields maxissueqty
("Current checkouts allowed"), the new fields will be added to the
different tables (see the "DB changes" patch) and will be named
maxonsiteissueqty (for consistency).
In order to keep the existing behavior and to let more flexibility,
a new system preference is added (ConsiderOnSiteCheckoutsAsNormalCheckouts).
This syspref will let the liberty to the library to decide if an on-site
checkout should be considered as a "normal" checkout or not.
To keep the existing behavior, the syspref will be disabled (i.e. an on-site
checkout is considered as a normal checkout) and the number of on-site
checkouts will be the same as the number of checkout (maxissueqty ==
maxonsiteissueqty).
Technically:
There are only very few tests for the Circulation module, and the 2
subroutines impacted by this patch set were not tested at all.
It is necessary to introduce non-regression tests for this area.
The 2 subroutines are: C4::Circulation::GetBranchBorrowerCircRule
and C4::Circulation::TooMany (only called by
C4::Circulation::CanBookBeIssued, so we will take the liberty to change
the prototype to raise a better warning to the end user).
Test plan:
I. Confirm there is no regression and the existing behavior is kept
0/ Let the syspref disabled
1/ Set a rule to limit to 2 the number of checkouts allowed
2/ Do a normal checkout
3/ Do an on-site checkout
4/ Try to checkout (on-site or normal) an item again.
You should not be allowed.
II. Test the new feature - pref disabled
0/ Let the syspref disabled
1/ Set a rule to limit to 2 the number of checkouts allowed and to 1
the number of on-site checkouts allowed.
2/ Do an on-site checkout
3/ Try to do another one, you should not be allowed to do it.
4/ A normal checkout should pass successfully
Note that it does not make sense to have the number of on-site checkouts
alowed > number of checkouts allowed.
III. Test the new feature - pref enabled
0/ Enable the syspref
Now an on-site checkout is *not* counted as a normal checkout.
This means you can have the number of on-site checkouts > number of
checkouts allowed.
1/ Set the values you want for the 2 types of checkouts (normal vs
on-site).
2/ Even if a patron has reached the maximum of checkouts allowed, he
will be allowed to do a on-site checkout (vice versa).
IV. Stress the developper
Using the different configurations available in the circulation matrix,
try to find one where the checkout is allowed and not should be.
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There are at least 2 wrong behaviors if the AnonymousPatron pref is not
defined (0 or empty string).
1/ If you use the clean borrower tools, you will get a successful
message when the nothing happened (the history has not been anonymised).
2/ At the OPAC, if a patron ask for delete his reading history, he will
get an error message "The deletion of your reading history failed,
because there is a problem with the configuration of this feature.
Please help to fix the system by informing your libr ary of this
error". IMO this should not happen, the history should be anonymised.
With this patch, the old_issues.borrowernumber field will be set to NULL
if the AnonymousPatron pref if not defined.
Test plan:
1/ Fill the pref with "" or 0
2/ At the OPAC, go on the privacy tab and click on the "Immedia deletion" button.
You should get a green and friendly message. Confirm that the history
has been anonymised.
3/ Use the "Batch patron anonymization" tools (tools/cleanborrowers.pl)
to anonymize the checkout history.
Confirm that a) it works and b) you get a message.
Try again with AnonymousPatron set to a valid patron. You should not see
any changes with the current behaviors.
NOTE: This patch tweaks C4/Circulation.pm and provides tests.
applying just this, and running prove success. Reverting just
C4/Circulation.pm fails, as expected.
Tested OPAC stuff with both patches applied.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
If a patron has requested anonymity on returning items and the system is
not correctly configured (AnonymousPatron no set or set to an inexistent
patron), the application should take it into account and not fail
quietly.
This patch is quite radical: the script will die loudly if the privacy
is not respected.
To be care of the bad "Software error", some checks are done in the
updatedatabase to be sure the admin will be warned is something is wrong
in the configuration.
Test plan:
1/ Test the updatedatabase entry:
a. Turn on OPACPrivacy and set AnonymousPatron to an existing patron
=> You will get a warning
b. Turn on OPACPrivacy and set AnonymousPatron to 0 or ''
=> You will get a warning
c. Turn on OPACPrivacy and set the privacy to 2 (Never) for at least 1 patron
Turn off OPACPrivacy
=> You will get a warning
d. In all other cases you will get no error
2/ Test the interface
a. Turn on OPACPrivacy and set the privacy to 2 (Never) for a patron
b. Now you can turn off OPACPrivacy or keep it on, behavior should be
the same
c. check an item out the patron
d. Check the item in using the check out table
=> fail
e. Check the item in using the Check in tab
=> fail (not gracefully).
Note that the software error could appear on other pages too.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Updatedatabase works as described
On staff, if don't have correct settings for anonymity it's
impossible to check-in (with OPACPrivacy on)
No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The circulation page has a new entry: a link to a list of the pending
in-house use.
Bug 10860 introduces a new way for managing in-house uses.
This patch adds a new page (from the circulation home page) to list all
pending in-house uses.
Test plan:
Go on the circulation home page and click on the in-house use link.
Verify all your in-house uses are listed and information are consistent.
Bug 11201: Display lib instead of AV code
This patch assumes that items.location is linked the the LOC
authorised values.
Signed-off-by: Nicole <nicole@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
According to the manual, "Items will stay in the PROC location until
they are checked in".
This is not the actual behavior. Right now items will only change from
PROC to CART, and that is only if InProcessingToShelvingCart is enabled.
Some libraries want to use the PROC to permanent location feature,
without using the CART.
Additionally, the location is only removed if using returns.pl, but
that is not what the manual says either. What if the library uses
SIP2 devices for handling returns? This should be taken into
account.
Test Plan:
1) Apply this patch
2) Set an item's current location to PROC, and it's permananet location
to a different location.
3) Check the item in any way you wish
4) Note the shelving location is updated to the permanent location
5) prove t/db_dependent/Circulation/Returns.t
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I tested this with items which had items.location set to 'PROC' and
items.permanent_location set to NULL, '', and a real value, and it
worked correctly in all cases. I tested with check-ins from returns.pl
and from the table of checkouts in circulation and the PROC location was
correctly removed in both cases.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The routines CheckValidBarcode and CheckIfIssuedToPatron were not tested
Test plan:
1/ Apply the patch
2/ Execute : prove t/db_dependent/Circulation/CheckValidBarcode.t t/db_dependent/Circulation/CheckIfIssuedToPatron.t
3/ The result of the command has to be a success without error or warning :
t/db_dependent/Circulation/CheckValidBarcode.t ...... ok
t/db_dependent/Circulation/CheckIfIssuedToPatron.t .. ok
All tests successful.
Files=2, Tests=32, 3 wallclock secs ( 0.04 usr 0.01 sys + 2.88 cusr 0.17 csys = 3.10 CPU)
Result: PASS
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Patches squashed
Tests pass, no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tests pass using sample data provided with Koha
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a new issuing rule: maxsuspensiondays.
A new column "Max. suspension duration (day)" appears in the main table
of the issuing rules.
If this value is filled, on returning an item, a patron won't be
suspended longer than this cap.
Test plan:
1/ Set "suspension in days" to 2.
2/ Check an item out to a patron and specify a due date to today - 10
days.
3/ Check the item in and verify the patron is suspended until today + 10
* 2 days.
4/ Remove the suspension.
5/ Set "Max. suspension duration" to 10.
6/ Check an item out to a patron and specify a due date to today - 10
days.
7/ Check the item in and verify the patron is suspended until today + 10
days.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
