This patch simplipfies the tests, and highlighs the fact the introduced
method should add filters to the current resultset.
It also aligns the tests with the currently adopted style.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Make sure syspref "opacbookbag" is set to "Allow".
2. Make sure syspref "HoldsNeedProcessingSIP" is set to "Don't fulfill".
3. Place a hold on an item.
4. Return item via SIP at the pickup library.
5. View biblio in Opac.
6. Note that it says "Available" as status.
7. Add biblio to Cart.
8. Open Cart.
9. Note that it says "Available" as status.
10. Apply patch.
11. Reload Opac page.
12. It should now say "On hold".
13. Reload Card page.
14. It should also say "On hold".
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch deducts the current cost of an order if modifying it, so that
the current cost isn't counted when checking whether the updated cost
will take the order total amount above the allowed budget.
To test:
1. Add an active budget of $1,000
2. Attach a fund of $1,000. Set the fund to warn at 98% and $900.
3. Add an order to a basket, give it a vendor price of $500 with no
discount or tax and Save
4. Modify the order and change the vendor price to $450 and Save
5. Notice you get a warning that this order total amount will exceed the
allowed budget - this is incorrect.
6. Apply the patch and cancel the change so you're redirected back to
the basket
7. Modify the order and change the vendor price to $450 and Save
8. You should be able to Save without requiring confirmation
9. Add another order to the basket, give it a vendor price of $100 with
no discount or tax and Save. This should save normally, confirming we
can add new orders that do not exceed the allowed budget
10. Add another order to the basket, give it a vendor price of $500 with
no discount or tax and Save. This should trigger the warning that you
will exceed the allowed budget, as expected.
Sponsored-by: Waikato Institute of Technology
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Note for QA:
The code for SMSnumber is still made dependent on
EnhancedMessagingPreferencesOPAC in order to not
disturb current behavior.
This fixes Enhanced on, EnhancedOPAC off; the case of
Enhanced off is not considered here.
Test plan:
Enable EnhancedMessaging, disable EnhancedMessagingOPAC.
Enable TranslateNotices.
Check if you can only change notice language on OPAC.
Enable EnhancedMessagingOPAC.
Check if you change messaging prefs too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: marie-luce <marie-luce.laflamme@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In Elasticsearch mappings table, in tabs with MARC fields, searching using DataTable search field does not work for MARC fields / subfields.
This is because cell contains an input HTML tag with MARC data in attribute value.
Test plan :
1) Go to Administration > Search engine configuration (Elasticsearch)
2) Go to tab 'Bibliographic records'
3) Enter in search field a used MARC field (like 245)
=> Table gets filtered by rows with mapping on searched field
4) Enter in search field the field+subfield used for issues (952l in KTD)
=> Table gets filtered by rows with mapping on field+subfield
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Fixes a single to a double underscore for translation in holds.js
* Fixes item_group to item group in API description
* Fixes volume hold to item group hold in syspref db descrpitions
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This feature builds upon bug 24857 and allows placing holds that target a specific item group of a record. It is patterned after the feature that allows limiting hold selection by itemtype ( AllowHoldItemTypeSelection ).
Test Plan:
1) Apply bug 24857 and this bug's patches
2) Run updatedatabase.pl
3) Restart all the things!
4) Enable the sysprefs EnableVolumes and EnableVolumeHolds
5) Create a record, items and item groups, with each item being assigned to
an item group
6) Place a hold for a patron
7) Note the new selector to choose an item group in addition to record and item level holds
8) Place an item group level hold
9) Check in an item from the record that is not part of that item group
10) Note the hold is not trapped for that item
11) Check in an item from the record that *is* part of that item group
12) Note the hold is trapped for that item
13) Place an item group level hold for another item
14) Run the holds queue builder
15) Note the holds queue targets only items from that item group
16) Check out all the items of that item group to other patrosn
17) Re-run the holds queue builder
18) Note the holds queue no longer has a line for that hold,
as all items that could fill that hold are now unavailable
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Also removes commented out Data::Dumper.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1) Create a few new tags to any biblio by visiting the biblio's detail
page on OPAC
2) The visit http://localhost:8080/cgi-bin/koha/opac-tags.pl and try
deleting those tags.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the 'public' hint to include the additional
functionality we now tie to it.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Do not list library in masthead and advanced search if branches.public is false
Test Plan:
* Set OpacAddMastheadLibraryPulldown to "Add"
* Go to Administration -> Libraries, edit "Fairfield", set "public" = "no" (at the end of the form)
* Or connect to DB and run
update branches set public = 0 where branchcode like 'F%';
This will set all three libraries starting with F to non-public
* open OPAC
* The "All libraries" Pulldown in the Header (between search slot and search button) still shows the non-public libraries
* Go to OPAC -> Advanced Search, scroll to "Location and availability": The selectbox still shows the non-public libraries
Now apply the patch
* Open OPAC
* The "All libraries" Pulldown in the Header now should not contain the libraries set to "public = no"
* And in the Advanced Search "Location and availability" pulldown those libraries should also not be shown.
Sponsored-by: Steiermärkische Landesbibliothek
Signed-off-by: Claude Demeure <claude.demeure@mailo.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Run t/db_dependent/Koha/Biblio/Metadata.t again. Should pass.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Run t/db_dependent/Koha/Biblio/Metadata.t
Fails with:
not ok 10 - 951-952s-953 in 245,100,942,951,953,999,952,952,952,952,952,952,952,952
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It has been moved to a Koha object.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If not counting patrons holds, found or unfound, we no longer need this option
introduced by bug 28078
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes three changes:
1 - The borrower's own holds are not counted towards HighHolds limit
2 - We exclude all hold counts from CanItemBeReserved
3 - Static mode should only decrease hold when over the decreaseLoanHighHoldsValue, not when equal
Previously a patron's hold could put the count over the threshhold, and
if the patron is only allowed 1 hold per record, and the hold wasn't found before
the checkout, it would make all items unholdable, thus lowering the theshhold for
dynamic HighHolds
To test:
1 - Set sysaprefs:
decreaseLoanHighHolds - enable
decreaseLoanHighHoldsDuration - 1
decreaseLoanHighHoldsValue - 1
decreaseLoanHighHoldsControl - "over the number of holdable items on the record" / dynamic
decreaseLoanHighHoldsIgnoreStatuses - blank
2 - Set circ rules to allow 1 hold per record and loan period of 5
3 - Find/create a record with 3 items
4 - Place a title level hold for two different patrons
5 - Attempt to checkout item - note warning about high holds
6 - Cancel checkout
7 - Set decreaseLoanHighHoldsControl - "on the record" / static
8 - Attempt checkout - note warning about high holds
9 - Apply patch
10 - Checkout item - no warning
11 - checkin item, replace hold
12 - Set decreaseLoanHighHoldsControl - "over the number of holdable items on the record" / dynamic
13 - Checkout item - no warning
14 - prove t/db_dependent/DecreaseLoanHighHolds.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a check on the existence of the object and passes this to the template
I also drop a level of IF by moving to ELSIF
To test:
1 - Enable ReturnLog amd IssueLog
2 - Checkout an item to a patron
3 - Return it
4 - View 'Modification log' tab of the borrwer
5 - Note item links, test them, they work
6 - Delete the item
7 - Reload and try links again, they do not work
8 - Apply patch
9 - Reload, no more links
10 - Checkout and return another item
11 - This one has links, and they work as before
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This alternate patch is different in a few ways:
- Add a hover background color only to items in dropdown menus.
- Use an SCSS variable for the background color
- Update the specificity of the hover CSS to more fully override
Bootstrap's default.
To test, apply the patch and rebuild the staff interface CSS.
- On any page in the staff interface, test the behavior of links in the
nav header.
- The always-visible links (Circulation, Patrons, etc) should keep the
same style as before: Underline on hover.
- In dropdown menus like "More" and the user menu in the upper right
corner, hovered links should have a green background.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes changes the button markup in label-creation templates
-- including the barcode image generator -- so that all submit buttons
and any buttons that should should be styled as primary buttons have the
Bootstrap class "btn btn-primary."
To test, apply the patch and view label-related pages to confirm
that everything looks correct. In most cases there are no visible
changes.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The TooMany() function and fine calculation functions were incorrectly
hard coded to use homebranch for fetching the circulation rules. Those
ignored completely the syspref HomeOrHoldingBranch where the user
might have set it to holdingbranch and therefore the fines and whether
patron has too many checkouts (TooMany()) were counted using the
unintended branch's rules. This problem only arises in the cases where
there are branch specific circulation rules defined.
Test plan:
1. Make sure following tests pass:
$ prove t/db_dependent/Circulation/_CalculateAndUpdateFine.t
$ prove t/db_dependent/Circulation/TooMany.t
Test plan for fines.pl:
1. Add branch specific fine rules for branches A and B. A having a
fine of 1 per day and B having a fine of 0 per day.
2. Set sysprefs:
CircControl = the library the items is from
finesMode = Calculate and charge
HomeOrHoldingBranch = holdingbranch
3. Create an item with home and holding branch of A
4. Checkout the item with a due date in the past (the past due date can be
specified by clicking "Checkout settings" in the checkout page) and
make sure the branch you are checking from is B.
5. Run perl /usr/share/koha/bin/cronjobs/fines.pl
6. Notice that fines have popped up now to the patron incorrectly
7. Apply patch
8. Pay fines, Check-in the item and check it out again
9. Run perl /usr/share/koha/bin/cronjobs/fines.pl
10. Notice that fine is now 0. This means that the branch
B (holdingbranch of the checked-out item) specific rule is used.
Test plan for staticfines.pl:
1. Add branch specific fine rules for branches A and B. A having a
fine of 1 per day and B having a fine of 0 per day.
2. Set sysprefs:
CircControl = the library the items is from
finesMode = Calculate and charge
HomeOrHoldingBranch = holdingbranch
3. Create an item with homebranch A and holding branch of A
4. Checkout the item with a due date in the past (the past due date can be
specified by clicking "Checkout settings" in the checkout page) and
make sure the branch you are checking from is B.
5. Run perl staticfines.pl --library A --library B --category <PATRONS_CATEGORYCODE>
and notice that now there is inccorectly fines
6. Apply patch
7. Pay fines, Check-in the item and check it out again
8. Run perl staticfines.pl --library A --library B --category <PATRONS_CATEGORYCODE>
and notice the fines are now not generated
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This shows that HomeOrHoldingBranch syspref is incorrectly not used by
_CalculateAndUpdateFine() when it decides which circ rule to use.
Run "prove t/db_dependent/Circulation/_CalculateAndUpdateFine.t" to
notice the tests now fail.
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This shows that HomeOrHoldingBranch syspref is incorrectly not used by
TooMany() when it decides which circ rule to use.
Run "prove t/db_dependent/Circulation/TooMany.t" to notice the tests
now fail.
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In framework a subfield can be defined with a link (with a search field).
This create an hyperlink in MARC view.
Currently with Elasticsearch the link does not work because search query contains 'field,phr:',
which is useless since the link contains 'idx=field,phr'.
With Zebra looks like the idx param is ignored.
Test plan :
1) Use Elasticsearch search engine
2) Edit subfield 245$a in default framework
3) Enter 'title' in 'Link'
4) Save
5) Create a record with default framework with 245$a = 'The Fifth Elephant'
6) Go to MARC view
7) Click on link in 245$a
8) You find the record
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Without this patch:
1. Set the syspref TwoFactorAuthentication (enforce or enabled)
2. Configure 2FA for a patron
3. Logout
4. Authenticate but don't enter the 2FA code
5. Switch off the syspref (disabled) [via another browser or so]
6. Patron is stuck on the [original] login screen. [Only removing
the session cookie would resolve it.]
With this patch:
1. Follow the steps above again. But note that you can refresh
your browser window to get in now.
2. Verify that Auth.t passes now too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Run without next patch. Should fail.
Run with next patch. Should pass.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=31881
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=31881
The new column was added to the table settings configuration.
To test:
* Make sure the column shows up in the columns menu of the table
in the staff interface.
* Verify it can be hidden/unhidden correctly using the menu
or the table setings.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=31881
