Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I felt the change to always center the user title worked well when
patronimages was enabled, but not so well when it was not (it looked
strange without a background for non-staff users).
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In patron pages it would help to see an icon indicating that this is a staff patron (having permission to access staff interface).
This may avoid wrong patron deletion or permission mistakes.
I propose the shield Font Awesome icon and a grey background
Patch also shows patron name and cardnumber aligned center instead of right.
Patch adds to 'patroninfo' div a class 'staffgrade' or 'normalgrade' to
allow more styling depending on patron beeing staff or not.
Test plan:
Compare display between a patron having staff interface access and one without permissions.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This adds new syspref, HoldsNeedProcessingSIP, which controls whether
a hold that is related to item will be filled automatically or not. If
the user has enabled the syspref then instead of fulfilling the hold
automatically the hold will go to "in processing" state.
To test:
1. Checkout a book to patron A
2. Place a bib level hold to the book for B
3. Patron A returns the book via SIP, to simulate this use:
./misc/sip_cli_emulator.pl -su koha -sp koha -l CPL -a 127.0.0.1 -p 6001 --item <ItemBarcode> -m checkin
4. Notice that no notification is generated for Patron B about hold
and that the hold status in intranet and opac is "In Processing".
5. Notice that patron A (or other patrons) cannot checkout a book
that is in processing, because it is considered to be attached to
the holdee (similarly to the waiting state):
./misc/sip_cli_emulator.pl -su koha -sp koha -l CPL -a 127.0.0.1 -p 6001 --patron <PatronABarcode> --item <ItemBarcode> -m checkout
Signed-off-by: Timothy Alexis Vass <timothy_alexis.vass@ub.lu.se>
Rebased-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sending out renewal notices depends on the RenewalSendNotice and the
patron having the checkout notice checked in their messaging
preferences.
To test:
- Apply patch
- Take a look at the messaging preferences table on the following pages:
- OPAC > patron account > your messaging tab
- Staff interface > patron account > details tab
- Staff interface > patron account > edit patron
- Toggle the RenewalSendNotice preferences
- The label on the last notice should switch between "Item checkout"
and "Item checkout and renewal" depending on the pref setting
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 25789 changed holds tables expriration input class as "datepickerto".
This results to past expiration date to be displayed as tomorrows date.
Class "futuredate" should have been used instead.
To test:
1. Have waiting hold with expiration date in past (e.g 24.9)
2. Observe that waiting reserves table displays correct expiration date
3. At the request.pl page expiration date is however displayed as 26.9
=> Apply patch
4. Confirm that expiration date at the request.pl is now 24.9
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In patron creation or edition actually the city field is displayed with input text then cities list.
I propose to display cities list first since it is more likely used.
Test plan :
1) Create some cities
2) Open patron creation form
3) Check you see for each city field : cities list, text "or enter", text input
4) Delete all cities
5) Open patron creation form
6) Check you see for each city field : only text input
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This allows to filter on standing orders on the acq advanced search
checkbox. For this purpose a new checkbox is shown behind the order
status search option.
As both not yet ordered and standing orders have the status
'new' or partially received internally, this seems like a good
placement as it will help distinguish these cases clearly.
new + standing order = standing order, but nothing received yet
partially received + standing order = active standing order
all status + standing order = all standing orders
To test:
- Create some baskets with at least one order, some 'standing' and
others not
- In the top toolbar choose tab Orders search > Advanced search
- Make some searches with and without the new 'Standing order' option
- Verify the right orders are found
- In the search results standing orders will now show with the
status + (standing order).
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves the functionality contained in biblio-default-view.inc
into biblio-title.inc. biblio-title.inc can now be called with a "link =
1" parameter in order for the title to be displayed as a link which is
controlled by the IntranetBiblioDefaultView preference.
To test, apply the patch and test the affected pages, especially titles
linked to in breadcrumbs menus
Acquisitions:
- Add to basket -> From existing record -> Search
- Title in search results
Catalog:
- Search for a record
- Add record to cart
- Open cart
- Title in brief display
- Check that link opens the correct page in the main window
- View bibliographic record
- ISBD view
- MARC view
- Normal view
- Local cover image detail page
- Checkout history
- Request article
- Item details
- From the "Edit" menu -> Attach item
- Stock rotation rota
- Place hold
Cataloging:
- Cataloging search -> Search results
Circulation:
- Article requests
- Overdues with fines
- Overdues
- Holds queue
- Holds to pull
- Hold ratios
- Holds awaiting pickup
- Transfers to recevie
- Renew
- Batch checkout
Lists:
- View list contents
Patrons:
- View patron details
- Holds history
- Checkout history
Tools:
- Rotating collections
- View collection
- Add item
- Tags
- Click term to see titles tagged with that term
- Batch record deletion
- Submit batch
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
QA: Please answer the question in admin/background_jobs.pl
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch introduces a way to define SMTP servers either globally or
per-library.
To test:
1. Apply this patch
2. Find the SMTP servers entry in the admin page
3. Play with adding/removing SMTP servers
=> SUCCESS: All works as expected
4. Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a section to the serials sidebar menu for showing
serials reports.
To test, apply the patch and go to Serials.
- If you are logged in as a user with permission to access reports you
should see a new "Reports" heading in the sidebar menu and a link to
the serials statistics wizard.
- Confirm that the link works correctly.
- Log in as a user without reports permission and confirm that the
section doesn't appear.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds links to two acquisitions-related reports in the sidebar
menu shown on acquisitions pages: Acquisitions statistics wizard and
orders by fund.
To test, apply the patch and go to the Acquisitions page.
- If you are logged in as a user with permission to access reports you
should see a new "Reports" heading in the sidebar menu and links to
two reports.
- Confirm that the links work correctly.
- Log in as a user without reports permission and confirm that the
section doesn't appear.
Signed-off-by: Brandon J <brandon.jimenez@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch eliminates the use of a separate include file containing
translatable strings in favor of embedding translatable strings in the
JavaScript itself.
To test, apply the patch and clear your browser cache if necessary.
- Perform a catalog search in the staff interface.
- Select two results to merge. Click Edit -> Merge records.
- Click "Next" on the "Merging records" page.
- On the "Source records" page click the second tab where all the
checkboxes are unchecked.
- Check the box for a tag which is non-repeatable, e.g. 245.
- You should see a message, "The field is non-repeatable and
already exists in the destination record. Therefore, you cannot add it."
- Check the box for a subfield which is non-repeatable, e.g. 245$a.
- You should see a message, "The subfield is non-repeatable and
already exists in the destination record. Therefore, you cannot
add it."
TESTING TRANSLATABILITY
- Update a translation, e.g. fr-FR:
> cd misc/translator
> perl translate update fr-FR
- Open the corresponding .po file for JavaScript strings, e.g.
misc/translator/po/fr-FR-messages-js.po
- Locate strings pulled from prog/js/merge-record.js for
translation, e.g.:
#: koha-tmpl/intranet-tmpl/prog/js/merge-record.js:72
msgctxt "Bibliographic record"
msgid ""
"The field is non-repeatable and already exists in the destination
record. "
"Therefore, you cannot add it."
msgstr ""
- Edit the "msgstr" string however you want (it's just for testing).
- Install the updated translation:
> perl translate install fr-FR
- Switch to your newly translated language in the staff client and
repeat the test plan above. The translated string should appear.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves translatable strings out of z3950_search.inc into
z3950_search.js, wrapped in the double-underscore function for
translation.
To test, apply the patch and go to Cataloging.
- Click "New from Z39.50/SRU"
- In the search form, uncheck all search targets and submit the form.
You should get an error: "Please choose at least one external target"
- Peform a search which will return multiple pages of results.
- Test that you can enter a number in the "Go to page" form to
navigate to a specific page.
- Enter a non-number in the field and submit. You should get an error,
"The page entered is not a number."
- Enter a number in the field which is greater than the number of pages
of results. Submitting the form should trigger an error, "The page
should be a number between 1 and 10."
- Perform the same tests from the other Z39.50 search results
interfaces:
- Acquisitions -> Add to basket -> From an external source.
- Authorities -> New authority -> New from Z39.50/SRU.
TESTING TRANSLATABILITY
- Update a translation, e.g. fr-FR:
> cd misc/translator
> perl translate update fr-FR
- Open the corresponding .po file for JavaScript strings, e.g.
misc/translator/po/fr-FR-messages-js.po
- Locate strings pulled from
koha-tmpl/intranet-tmpl/prog/js/z3950_search.js for translation,
e.g.:
msgid "The page entered is not a number."
msgstr ""
- Edit the "msgstr" string however you want (it's just for testing).
- Install the updated translation:
> perl translate install fr-FR
- Switch to your newly translated language in the staff client
and repeat the test plan above. The translated strings should
appear.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves most of the JavaScript out of calendar.inc and into a
new file, calendar.js. English strings in calendar.js are now wrapped in
the double-underscore function to allow for translation.
The patch shouldn't affect datepicker functionality in any way.
To test, apply the patch and test the datepicker in various contexts:
- Reports -> Statistics wizards -> Patrons
- Date of birth "from" and "to" should be linked so that the former
must come before the latter.
- Patrons -> Add or edit patron
- The date of birth field datepicker shouldn't allow you to pick a
future year from the dropdown.
- Tools -> Calendar.
- Test that the calendar tool works correctly.
- Test with various settings of the dateformat system preference.
TESTING TRANSLATABILITY
- Update a translation, e.g. fr-FR:
> cd misc/translator
> perl translate update fr-FR
- Open the corresponding .po file for JavaScript strings, e.g.
misc/translator/po/fr-FR-messages-js.po
- Locate strings pulled from
koha-tmpl/intranet-tmpl/prog/en/js/calendar.js for translation,
e.g.:
msgid "August"
msgstr ""
- Edit the "msgstr" string however you want (it's just for testing).
- Install the updated translation:
> perl translate install fr-FR
- Switch to your newly translated language in the staff client
and test the datepicker again. Translated strings like days of
the week and months should be correct.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves string definitions out of strings.inc and into the
corresponding JavaScript files.
To test, apply the patch and test various pages in the staff interface:
A few suggestions:
- Perform a catalog search and view the detail page for a bibliographic record.
- Confirm that the search results browser in the left-hand sidebar
work correctly and that the title attributes of the controls are
correct.
- Locate a patron with multiple checkouts. View the checkout page and
test the various controls in the table of checkouts: Renew, check in,
return claims, etc.
- View the list of holds on a patron's account. Test suspending and
resuming holds.
TESTING TRANSLATABILITY
- Update a translation, e.g. fr-FR:
> cd misc/translator
> perl translate update fr-FR
- Open the corresponding .po file for JavaScript strings, e.g.
misc/translator/po/fr-FR-messages-js.po
- Locate strings pulled from
koha-tmpl/intranet-tmpl/prog/js/checkouts.js for
translation, e.g.:
msgid "Checked in"
msgstr ""
- Edit the "msgstr" string however you want (it's just for
testing).
- Install the updated translation:
> perl translate install fr-FR
- Switch to your newly translated language in the staff client
and repeat the test plan above. The translated strings should
appear.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves translatable strings out of members-menu.inc into
members-menu.js where they can be translated using the double-underscore
i18n function.
To test, apply the patch and go to Patrons.
- Expand the search options in the search header by clicking the [+]
link.
- Select "Date of birth" from the "Search fields" dropdown.
- A tooltip should appear above the search form, "Dates of birth
should be entered in the format..." with your current date format.
- Remove all "Adult" type patron categories but one.
- Check out to a child patron.
- From the "More" menu choose "Update child to adult patron."
- You should see a confirmation.
- From the checkout screen, from the "More" menu, choose "Renew patron"
- You should get a confirmation.
TESTING TRANSLATABILITY
- Update a translation, e.g. fr-FR:
> cd misc/translator
> perl translate update fr-FR
- Open the corresponding .po file for JavaScript strings, e.g.
misc/translator/po/fr-FR-messages-js.po
- Locate strings pulled from
koha-tmpl/intranet-tmpl/prog/js/members-menu.js for translation,
e.g.:
msgid "Are you sure you want to renew this patron's registration?"
msgstr ""
- Edit the "msgstr" string however you want (it's just for testing).
- Install the updated translation:
> perl translate install fr-FR
- Switch to your newly translated language in the staff client
and repeat the test plan above. The translated strings should
appear.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves translatable strings out of catalog-strings.inc into
catalog.js, wrapped in the double-underscore function for
translation.
To test that each affected string correctly appears in the interface:
- View the details for a bibliographic record which has items attached.
- From the Edit menu, choose "Delete record." You should get an alert,
"X item(s) are attached to this record. You must delete all items
before deleting this record."
- From the Edit menu, choose "Delete all items." You should get an
alert, "Are you sure you want to delete the X attached items?"
- When logged in as a user with acquisitions and cataloging privileges,
view the details for a bibliographic record which is used in an order
in Acquisitions. Delete any items attached.
- Choose "Delete record" from the Edit menu. You should get an alert,
"Warning: This record is used in X order(s). Deleting it could cause
serious issues on acquisition module. Are you sure you want to delete
this record?"
- In Acquisitions, view a basket containing orders. Cancel the
order for a title in the basket. Open the detail page for the title in
the cancelled order. Try to delete it. You should get an confirmation,
"X deleted order(s) are using this record. Are you sure you want to
delete this record?"
- Perform the same test as a user with cataloging but not acquisitions
privileges. The alert should say "X deleted order(s) are using this
record. You need order managing permissions to delete this record."
- When logged in as a user with cataloging but not acquisitions
privileges, view the details for a bibliographic record which is used
in an order in Acquisitions. Delete any items attached.
- Choose "Delete record" from the Edit menu. You should get an alert, "X
order(s) are using this record. You need order managing permissions to
delete this record."
- View the details for a bibliographic record which has a hold.
- Choose "Delete all items" from the Edit menu. You should get an alert,
"X hold(s) on this record. You must delete all holds before deleting
all items."
- View the details for a bibliographic record which has no items.
- Choose "Delete record" from the Edit menu. You should get an alert,
"Are you sure you want to delete this record?"
- Choose "Edit items in a batch" from the Edit menu. You should get an
alert, "This record has no items."
I could not find any instance of the PopupZ3950Confirmed function in
catalog.js being triggered so I don't think the associated string can be
tested.
TESTING TRANSLATABILITY
- Update a translation, e.g. fr-FR:
> cd misc/translator
> perl translate update fr-FR
- Open the corresponding .po file for JavaScript strings, e.g.
misc/translator/po/fr-FR-messages-js.po
- Locate strings pulled from
koha-tmpl/intranet-tmpl/prog/js/catalog.js for
translation, e.g.:
msgid "This record has no items."
msgstr ""
- Edit the "msgstr" string however you want (it's just for
testing).
- Install the updated translation:
> perl translate install fr-FR
- Switch to your newly translated language in the staff client
and repeat the test plan above. The translated strings should
appear.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves the definition of translatable strings out of
additem.js.inc and into additem.js using the new JS i81n function.
additem.js.inc is removed, being obsolete.
To test:
When creating an order:
- Go to Administration -> System preferences and set "AcqCreateItem" to
"when placing an order."
- Apply the patch and go to Acquisitions -> Vendor -> Add to basket ->
From a new (empty) record.
- In the "Item" section, confirm that the buttons at the bottom of the
form are correct: "Add item," "Clear," and "Add multiple items."
- Click "Add multiple items." The placeholder in the revealed form field
should read "Number of items to add." The corresponding button should
be labeled "Add."
- You should see a note, "NOTE: Fields listed in the 'UniqueItemsFields'
system preference will not be copied."
- Fill out the item entry form and add a number to the "multiple items"
field. Click "Add."
- A table of items should be displayed with "Edit" and "Delete" buttons
for each new item.
- Click one of the "Edit" buttons. The item form should be populated
with the item's data, with an "Update item" button at the bottom.
When receiving an order:
- Go to Administration -> System preferences and set "AcqCreateItem" to
"when receiving an order."
- Go to Acquisitions -> Vendor -> Receive shipments.
- Select or create an invoice.
- Click "Receive" on an order which has a quantity greater than 1.
- Add two items, duplicating in each at least one value which is marked
as unique by the "UniqueItemFields" system preference (e.g. fill in
the same barcode number for each item).
- Click "Save." You should get an alert about duplicated values, and
there should be an alert message on the page, "barcode 'XXX' is
duplicated."
- Edit one of the two items and change the barcode to one which already
exists in your database.
- Click "Save." An alert message should be shown on the page, "barcode
'XXX' already exists in the database."
- Note: I was unable to find out how to trigger this error, "You can't
receive any more items." It may be obsolete.
TESTING TRANSLATABILITY
- Update a translation, e.g. fr-FR:
> cd misc/translator
> perl translate update fr-FR
- Open the corresponding .po file for JavaScript strings, e.g.
misc/translator/po/fr-FR-messages-js.po
- Locate strings pulled from
koha-tmpl/intranet-tmpl/prog/js/additem.js for translation,
e.g.:
msgid "Add multiple items"
msgstr ""
- Edit the "msgstr" string however you want (it's just for testing).
- Install the updated translation:
> perl translate install fr-FR
- Switch to your newly translated language in the staff client
and repeat the test plan above. The translated strings should
appear.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Selecting "main address" city or "alternate address" city does not trigger the automatic population of values to the city, state, and zip fields anymore.
It woks for "alternate contact".
Test plan :
1) Create some cities with all datas : city, state, zip code and country
2) Open patron creation form
3) On "main address", select a city in combobox
4) Check city, state, zip code and country are filled
5) Same with "alternate address"
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch sets the keep_text class correctly in cat-search.inc
for the "Search the catalog" tab
To test:
1) Apply the patch
2) Go to /cgi-bin/koha/catalogue/search.pl
3) Type "A" into the search box for "Search the catalog"
4) Click on the "Check out" tab
5) Note that "A" appears in search box
6) Change "A" to "B" in search box
7) Click on the "Search the catalog" box
8) Note that "B" appears in the search box
9) Note no Javascript errors in the console
Signed-off-by: Didier Gautheron <didier.gautheron@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Same as previously
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The description of REFUND type accountline credits introduced with the "issue refund" feature is not translatable.
To test:
- Make sure a language with a complete translation is installed
- Switch to the language
- Go to any user account
- Add a manual invoice
- Pay it off fully or partially
- Click on "issue refund"
- Confirm the refund
- Check the description of the line in the patron account is not translated.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We don't allow editing of orders that are part of a closed basket, but
we don't enforce the rule in the controller file.
This patch use output_and_exit to stop the script and display an error
to the end user.
Test plan:
Create a basket, add an order
On the basket view you see the "Modify" link, open it in a separate tab
=> You can edit the basket
Keep this tab open, get back to the other one and close the basket
Reload the tab with the order edition form
=> You cannot longer edit the basket
QA: Do we need a check in addorder.pl as well?
Signed-off-by: Henry Bolshaw <bolshawh@parliament.uk>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch set attempts to replace all the <i> tags with <em> and all
the <b> tags with <strong> in the staff interface.
I attempted to get all the templates, includes, and xslt files.
To test:
1. Review the changes as best as possible, looking for mistakes.
2. grep for <i> and <b> in the modules, includes, and xslt folders. You should get nothing/
3. If you grep '<\/i>' you should only see instances of Font Awesome.
4. If you grep '<\/b>' you should only see instances where caret is used.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The patron edition was broken, we always got the pattern alert
Password:
Password must contain at least 8 characters, including UPPERCASE, lowercase and numbers
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the capability to override minPasswordLenth and RequireStrongPassword settings by category
To test:
1. koha-shell kohadev
2. koha-mysql kohadev
3. drop database koha_kohadev;
4. create database koha_kohadev;
5. go to admin page and start webinstaller. There continue the steps until onboarding.
6. reach step 3 of onboarding and create a new administrator patron
CHECH => Password control woks as normal (Minimum length 3 and strong required)
7. finish Koha installation and enter admin with your new administrator
8. set minPasswordLength to 3 and RequireStrongPassword to “Don’t require”
9. Create a new category (CAT2 from now on.. CAT1 is the category you made in onboarding process) and set minimum password length to 8 and require strong password
10. Create two new patrons, one with CAT1(patron1) and one with CAT2 (patron2)
CHECK => In both cases, try different combinations of length and strength. For patron1 the only requirement is to have 3 letters, but for patron2 the minimum length will be 8 and will require strong password.
CHECK => Try changing patron category before saving. Password requirements will change with category change.
11. Edit CAT1 and set minimum password length to 5
12. Go to patron1 details page, and change password.
CHECH => Now password minimum length is 5, but still it doesn’t require strong password
13. Edit CAT1, leave blank minimum password length and set require strong password to yes.
14. Go to patron1 details page, and change password.
CHECH => Password minimum length is back to 3, but now strong password is required
15. Set minimum password length in CAT2 to 12.
16. Go to patron2 details page, and click to fill a random generated password
CHECK => generated password should be 12 characters length
17. Set PatronSelfRegistration to Allow in admin settings
18. Go to OPAC and fill self registration from.
CHECK => Play with patron category. For each change in category, password requirements are modified.
CHECK => Set CAT1 as patron category, set ‘aA1’ as password (or another valid password for CAT1) and before hitting submit button, change to CAT2. Form should enter invalid state, and CAT2 password requirements should be displayed as error in password input.
19. Create a patron for CAT1 and another for CAT2, leaving password blank
CHECK => For CAT1’s patron, generated password length is 8 (minimum length for generated passwords), but for CAT2’s patron should be 12
20. In admin set PatronSelfRegistrationVerifyByEmail to require
21. Fill self registration form again with CAT2 as category
CHECK => Password requirements works as previous case.
22. Leave password blank and click submit
23. select * from message_queue;
24. Copy the link in the message and paste it in OPAC
CHECH => Generated password is 12 characters long. (Copy user id for next steps)
25. In admin set OpacResetPassword to Allow
26. Go back to OPAC, reload and click on “Forgot password?” link
27. Paste user id and click submit
28. Repeat steps 23 and 24
CHECK => Info message says “Your password must contain at least 12 characters, including UPPERCASE, lowercase and numbers.”
CHECK => enter an invalid password and you’ll get the same message in warning.
29. Login OPAC with the last user and your newly created password
30. Go to “Change your password” option
CHECK => Info message says “Your password must contain at least 12 characters, including UPPERCASE, lowercase and numbers.”
CHECK => enter an invalid password and you’ll get the same message in below “New password” input.
31. prove t/db_dependent/AuthUtils.t t/db_dependent/Koha/Patron/Category.t
32. Sign off
Sponsored-by: Northeast Kansas Library - NEKLS
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates the version of Bootstrap in the OPAC from 2.3.1 to
4.5.0. The Bootstrap JavaScript files have been replaced with custom
builds of the 4.5.0 JavaScript source files. The Bootstrap CSS is now
built into the OPAC CSS by loading the required Bootstrap 4.5.0 SCSS
files in node_modules.
OPAC SCSS now starts with Bootstrap customizations:
/* Bootstrap variable customizations */
$headings-color: #727272;
...
Followed by loading the necessary Bootstrap SCSS files:
/* Bootstrap imports */
@import "../../../../../node_modules/bootstrap/scss/functions";
@import "../../../../../node_modules/bootstrap/scss/variables";
...
Followed by our CSS. The build process for generating compiled CSS now
creates a file which bundles Bootstrap CSS and ours. Removed from the
Koha source: Bootstrap CSS files, Bootstrap "glyphicons" images.
The upgrade to Bootstrap 4 involved a lot of markup changes to conform
with new Bootstrap classes, especially in classes related to the grid.
Besides duplicating the grid we used before, this upgrade adds some new
features made possible by Bootstrap 4.5's use of flexbox as a layout
tool. This includes custom ordering of columns based on class names:
https://getbootstrap.com/docs/4.5/layout/grid/#order-classes.
Other areas where the most changes have been made: Navigation menus,
breadcrumb menus, buttons, dropdowns.
Bootstrap's JavaScript file is now "bootstrap.bundle.min.js" to reflect
the fact that a required JavaScript asset is now distributed separately
in Bootstrap 4. The "bundle" version includes Popper.js.
Unrelated changes: Indentation corrections, removal of invalid
"//<![CDATA[" markers, removal of invalid script type attributes.
To test, apply the patch and run 'yarn install' to install Bootstrap as
an npm module. Run 'yarn build --view opac' to regenerate the OPAC CSS.
Test as many aspect of the OPAC as possible, viewing pages at various
browser widths to confirm that everything adjusts well. Test with
various OPAC interface system preferences enabled and disabled.
Test self checkout and self checkin.
Known issues: RTL support has not been updated.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patchset prevents a non-superlibrarian user from editing a
superlibrarians email address via memberentry. This is to prevent a
privilege escalation vulnerability whereby a user could update a
superlibrarians contact details to match their own and then request a
password reset via the OPAC.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Additional capitalization, punctuation, terminolgy and improvements to
text for system preferences:
- Punctuation (such as full stops at the end of sentences)
- Capitalization
- Terminology (staff interface, use of "Don't" instead of "Do not")
- Rearranged/rephrased for better readability
To test:
- Verify that the changes listed are consistent and make sense.
- Check that on the staff interface home page that the window title says
"Koha staff interface".
- Verify that in system preferences the name of the tab for Staff
interface displays correctly, and that clicking on it brings up the
staff interface preferences.
- For Patrons > CollapseFieldsPatronAddForm check that the edit and add
patron form works correctly (edit a patron, add a new patron, check that
labels display correctly).
Staff interface home page
-------------------------
- Change the page title in browser from "Koha staff client" to "Koha
staff interface".
Administration
--------------
Google OpenID Connect:
. GoogleOpenIDConnectAutoRegister: change "Don't Allow" to "Don't allow"
and change "users" to "patrons".
. GoogleOpenIDConnectDefaultBranch: move the input field to the end of
the sentence.
. GoogleOpenIDConnectDefaultCategory: move the input field to the end of
the sentence.
. GoogleOpenIDConnectDomain: reword to "Restrict Google OpenID Connect
to domain (or subdomain of this domain): ____. Leave blank for all
Google domains.".
Interface options:
. SendAllEmailsTo: add a full stop.
Share anonymous usage statistics:
. UsageStatsLibrariesInfo: change "Do not share" to "Don't share"; add a
full stop; for note "Don't share" should be "No".
. most preferences: for note "Don't share" should be "No" (don't share)
(for preferences UsageStatsCountry, UsageStatsGeolocation,
UsageStatsLibrariesInfo, UsageStatsLibraryName, UsageStatsLibraryType,
and UsageStatsLibraryUrl), various edits to make more readable and
consistent.
Authorities
-----------
General
. AuthorityControlledIndicators: change "biblio field" to "bibliographic
field".
. AutoCreateAuthorities: change "do not generate" to "don't generate".
Linker:
. CatalogModuleRelink: change "Do not" to "Don't".
. LinkerKeepStale: change "Do not" to "Don't".
. LinkerModule: change "Default" to "default".
. LinkerOptions: add a full stop.
. LinkerRelink: change "Do not" to "Don't".
Cataloguing
-----------
Display:
. MergeReportFields: change "example:" to "Example:"
Exporting:
. BibtexExportAdditionalFields and RisExportAdditionalFields: change
"Include following" to "Include the following"; add ":" at end of
sentence, change "specificy" to "specify", and add full stops at end of
complete sentences.
Interface:
. EnableAdvancedCatalogingEditor: format NOTE in bold.
Record structure:
. AlternateHoldingsField: change "(This" to "(this", change "; for
instance" to ", for example", remove full stop.
, MarcFieldForCreatorId: format NOTE in bold.
. SubfieldsToAllowForRestrictedBatchmod: change "pref" to "system
preference".
Circulation
-----------
Batch checkout:
. BatchCheckoutsValidCategories: add a full stop.
Checkin policy:
. CalculateFinesOnReturn: only bold "NOTE", not the whole sentence (x2).
. StoreLastBorrower: change "opacreadinghistory/AnonymousPatron" to "the
opacreadinghistory and AnonymousPatron".
. UpdateItemLocationOnCheckin: change note "for these locations only can
location and permanent_location differ," to "for these locations the
location and permanent_location can differ,"
. UpdateNotForLoanStatusOnCheckin: change "E.g.," to "For example,"
Checkout policy:
. AgeRestrictionMarker: change "E.g.," to ". For example,"
. AllFinesNeedOverride: change "system preference noissuescharge" to
"the noissuescharge system preference".
. AllowFineOverride: add "the" before "noissuescharge".
. AllowRenewalLimitOverride: change "with respect to" to "for".
. AutoRemoveOverduesRestrictions: change "Do not" to "Don't".
. DefaultLongOverdueChargeValue: change "user" to "patron".
. ItemsDeniedRenewal: change . "e.g.," to "For example:", format the
note the same as other notes with NOTE in bold.
. OnSiteCheckoutsForce: change "on-site" to "on-site checkout", "(Even"
to "(even", and "user" to "patron".
. RentalFeesCheckoutConfirmation: change "do not ask" to "don't ask".
. RestrictionBlockRenewing: change "If patron" to "If a patron", change
"Allow" and "Block" to "allow" and "block".
. UseTransportCostMatrix: "Transport" to "the transport".
Interface:
. AllowOfflineCirculation: change "Do not enable" to "Don't enable".
. ExportRemoveFields: add a full stop.
. ShowAllCheckins: change "Do not show" to "Don't show".
. UpdateTotalIssuesOnCirc: change "Do not" to "Don't".
Interlibrary loans:
. CirculateILL: add a full stop.
. ILLCheckAvailability: add a full stop.
Self check-in module (sci-main.pl):
. SelfCheckInModule: change "module. (available" to "module (available",
add a full stop.
Self check-out module (sco-main.pl):
. AutoSelfCheckAllowed: change "automatically login" to "automatically
log in".
. WebBasedSelfCheck: change "system. (available" to "system (available",
add a full stop.
Enhanced content
----------------
Novelist Select:
. NovelistSelectStaffView: change "staff" to "staff interface".
Babelthèque:
. Babeltheque_url_js: rewitten
. from "______ Defined the URL for the Babeltheque javascript file
(eg. http://www.babeltheque.com/bw_XX.js)"
. to "Use this URL for the Babelthèque javascript file: ________
(e.g. http://www.babeltheque.com/bw_XX.js)."
. Babeltheque_url_update: rewritten
. from "______ Defined the URL for the Babeltheque update
periodically (eq. http://www.babeltheque.com/.../file.csv.bz2)."
. to "Use this URL for the Babelthèque periodic update: _______ (e.g.
http://www.babeltheque.com/.../file.csv.bz2)."
I18N/L10N
---------
. dateformat and TimeFormat: Change "Note" to "NOTE" to be consistent
with other notes, change <b> tag to <strong> as it is more semantically
correct.
Logs
----
Debugging:
. DumpTemplateVarsIntranet: change "variable" to "variables" and "staff
intranet" to "staff interface".
. DumpTemplateVarsOpac: change "variable" to "variables".
Logging:
. AuthFailureLog: add full stop.
. AuthSuccessLog: add full stop.
OPAC
----
Appearance:
. BiblioDefaultView: change "bib" to "bibliographic".
. HighlightOwnItemsOnOPAC: change ". (Non-XSLT Only)" to " (non-XSLT
only).".
. OpacAdditionalStylesheet: change "specified" to "specific".
. OPACDisplay856uAsImage: change all options in the drop down list so
they start in lowercase.
. OpacHighlightedWords: change ";" to a full stop, add a full stop at
the end.
. OPACHoldingsDefaultSortField: add a full stop.
. OpacMaxItemsToDisplay: change "user" to "patron".
. OPACMySummaryHTML: change "user" to "patron".
. OpacSeparateHoldings: change "user's to "patron's".
. OpacStarRatings: change "user" to "patron" for the drop down option.
. OPACShowUnusedAuthorities: change "Do not show" to "Don't show".
. OPACUserSummary: change "user's to "patron's", change "fines" to
"charges".
. OPACXSLT*: change "Leave" to "leave".
. Remove empty row at bottom of appearance options.
Features:
. OpacBrowser: change "OPAC" to "the OPAC".
. OpacBrowseSearch: reword as "[Enable/Disable] interface for browsing
all holdings (Elasticsearch only)."
. OpacCloud: change "OPAC" to "the OPAC".
. OPACDetailQRCode: change "Don't enable" to "Disable".
. OPACFinesTab: change "Fines" to "charges", change "the My Accouunt" to
"their account". (Should now show as "..patrons to access the charges
tab on their account page on the OPAC."
. OpacHoldNotes: change "Do not allow" to "Don't allow", change "users"
to "patrons".
. OpacResetPassword: change "users" to "patrons", add full stop.
. SocialNetworks: change "in opac" to "on the OPAC".
Note: Also deleted lines with # in front of them for the OpacBrowser and
OpacCloud system preferences in the Policy section - these look like
duplicated entries to me (previously lines 600-611).
Policy:
. OPACFineNoRenewalsIncludeCredits: change "users" to "patrons".
Self registration and modification:
. PatronSelfRegistrationConfirmEmail: change "Do not require" to "Don't
require", change "users" to "patrons".
. PatronSelfRegistrationEmailMustBeUnique: change "Do not consider" to
"Don't consider".
. PatronSelfRegistrationPrefillForm: change "Do not display and prefill"
to "Don't display and prefill".
Patrons
-------
General:
. AllowPatronToControlAutorenewal: add full stop.
Notices and notifications:
. EnhancedMessagingPreferences: change "Staff" to "staff".
- FallbackToSMSIfNoEmail: change "Send" to "sending".
Patron forms:
. BorrowerUnwantedField: add full stop.
. CollapseFieldsPatronAddForm:
. Dropdown list changes:
.. "Organization/Patron identity" => "Patron identity".
.. "OPAC/Staff login" to "OPAC/Staff interface login".
. Requires changes to the memberentrygen.tt - check that the add and
edit form for a patron dispaly correctly:
.. change "Contact" to "Contact information".
.. change "Library set-up" to "Library setup".
.. change "OPAC/Staff login" to "OPAC/Staff interface login".
Patron relationships:
. PrefillGuaranteeField: change drop down list option "Main address -
street number" to "Main address - Street number" to match with format of
other entries.
Security:
. RequireStrongPassword: change "More" to "more".
Searching
---------
Search form:
. AdvancedSearchTypes: change "staff-side" to "staff interface".
. expandedSearchOption: change "staff" to "staff interface".
Serials
-------
. makePreviousSerialAvailable: change "Do not make" to Don't make";
"syspref" to "system preference".
. PreserveSerialNotes: change "Do not" to "Don't".
. RoutingListNote: change "Include following" to "Include the following"
Staff interface
---------------
Tab label and link:
. This tab was previously labelled "Staff client".
. Change tab label on the left hand side from "Staff client" to "Staff
interface".
. Change URL when selected from "preferences.pl?tab=staff_client" to
"preferences.pl?tab=staff_interface".
. Check that the link works as expected.
Appearance:
. IntranetFavicon: change "Staff" to "staff".
Tools
-----
Reports:
. NumSavedReports: change "Saved reports page" to "saved reports page".
Web services
------------
IdRef:
. IdRef: change "allows to request" to "allows requests for".
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This changes "staff client" to "staff interface" and fixes capitalization
in a couple of cases.
For terminology changes see:
https://wiki.koha-community.org/wiki/Terminology#S
To test:
- Read through the preferences of the "staff interface" tab.
- Staff interface should be used consistently.
- Firefox "PlugIn" was changed to "add-on" reflecting Mozilla's
own terminology.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch puts definition of the missing "searchid" variable into an
include file to be used by various bibliographic detail pages. The
variable is required by several JavaScript functions.
To test, apply the patch and locate or create a record with no items.
Open the labeled MARC view and choose Edit -> Delete record. Confirm the
deletion. The deletion should complete correctly.
Perform the same test with the detail view, ISBD view, MARC view, and
items view.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We have agreed to use 'staff interface' instead of 'staff client'
and similar terms. This fixes the template files where staff client
appears:
To test:
- Check Administration > Patron categories
- Check the title of the staff interface start page in your
browser tab
- Check the description of hte catalogue permission
- One more: this changes the message shown when someone managed
to log in as the database user - as we no longer allow that, I am
not sure if it can be triggered.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
- Remove the unordered list added to the holds list Details column
- Switch div to span to have the hint appear behind the checkbox
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch
* sets one check for reserves and another for old_reserves in
atomic update
* Adds a message below the checkbox and adds detail when a hold is non
priority
* Fixes issue when there are more than one hold, but the first is non
priority
* Adds test case for this last scenario
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some libraries would like to be able to cancel a hold with the option to
specify a reason. Providing a reason would generate an email to that
patron.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Restart all the things!
4) Create new AV category "HOLD_CANCELLATION", add some cancelation reasons
5) Add new Holds module notice "HOLD_CANCELLATION", add an email version.
A quick test version would be "Reason: <<reserves.cancellation_reason>>"
--
[% USE AuthorisedValues %]
Reason: [% AuthorisedValues.GetByCode( 'CANCELLATION_REASON', hold.cancellation_reason, 'IS_OPAC' ) %]
[% IF hold.cancellation_reason == "MY_AV_VALUE" %]
IF perhaps you'd like to have a much longer explanation than just the
one sentence in the AV description, you can use IF blocks using Template
Toolkit markup!
[% END %]
--
6) Place a hold for a patron
7) On request.pl, select the 'del' option for the hold
8) Select a cancellation reason and choose "Update hold(s)"
9) Note a new message has been queue for the patron with the cancelation reason
11) Test again from circulation.pl
12) Test again from moremember.pl
10) Cancel a hold with no reason, note no email is generated
11) Delete your authorised values, not the feature is disabled
12) Reinstate the authorised values, but delete the notice,
you should now be able to cancel a hold with a reason,
but no email will be generated
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is a "norequest" boolean passed to the include cat-toolbar.inc, to
display or not the "Pace hold" button.
This flag was not calculated in some place (ISBDdetail and moredetail
for instance)
Here we centralize the code to make it more robust and less regression
prone.
Note that the same problem appears at the OPAC (opac-MARCdetail is
always display the button). That will have to be fixed separately
Test plan:
Create biblio A with 0 item, B and C with 1 item and D with 2 items
item for B is not for loan, C is for loan and D has 1 of each
Go to the bibliographic detail page of each record and confirm that the
"Place hold" button appears appropriately.
Test the different tabs of the catalogue module
QA note: This patch is only centralizing the existing code, but it is
still too naive. To manage the visibility of this button we certainly
want to copy what is done in C4::Search::searchResults:
# can place a hold on a item if
# not lost nor withdrawn
# not damaged unless AllowHoldsOnDamagedItems is true
# item is either for loan or on order (notforloan < 0)
$can_place_holds = 1
if (
!$item->{itemlost}
&& !$item->{withdrawn}
&& ( !$item->{damaged} || C4::Context->preference('AllowHoldsOnDamagedItems') )
&& ( !$item->{notforloan} || $item->{notforloan} < 0 )
);
Signed-off-by: Didier Gautheron <didier.gautheron@biblibre.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We do not longer need the order variables to be passed from the
controllers, we can call the methods on the biblio object instead.
There is something wrong with our ->search method and TT behaviours, it
is hard to retrieve object list in a scalar context.
If [% objects.method.count %] is called, objects.method will get the
first object of the list and count will explode (Koha::Object->count
does not exist)
We need to force the call in a scalar context to retrieve an iterator
and prevent to fetch all the objects (we could have called all then
size, but it's not efficient)
If adopted I will move the plugin on a separate bug report to ease
backport
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We do a bit of refactoring to make the code reusable.
Test plan:
Same as the first patch but when adding/editing an item
QA note: There is a warning from the QA tools
FAIL koha-tmpl/intranet-tmpl/prog/en/modules/cataloguing/additem.tt
FAIL js_in_body
A <script> tag found inside head, must be moved to the body (see bug 17858)
I don't think how we could avoid it.
Sponsored-by: Orex Digital
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes to general changes. First, it makes some minor style
changes to the appearance of the dropdowns. Second, it moves the JS
content in select2.inc into a separate JS file. This is made possible by
Bug 21156.
To test, apply the patch and view a page which uses the Select2 library,
e.g. the add item screen. Confirm that the Select2-styled dropdowns look
good and work correctly.
TESTING TRANSLATABILITY
- Update a translation, e.g. fr-FR:
> cd misc/translator
> perl translate update fr-FR
- Open the corresponding .po file for JavaScript strings, e.g.
misc/translator/po/fr-FR-messages-js.po
- Locate strings pulled from
koha-tmpl/intranet-tmpl/prog/js/select2.js for translation,
e.g.:
msgid "No results found"
msgstr ""
- Edit the "msgstr" string however you want (it's just for
testing).
- Install the updated translation:
> perl translate install fr-FR
- Switch to your newly translated language in the staff client and
test a Select2-styled dropdown. Test that translated strings appear.
For example:
- Use the filter form to search for a string which isn't found. You
should see a translated version.
- Make a selection in one of the dropdowns. Hover your mouse over the
"X" icon which now appears. The tooltip should be a translated
version.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This will set a correct width by default.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We want to restore the previous behaviour and keep the options closed when
clear is clicked
https://github.com/select2/select2/issues/3320#issuecomment-621662039
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The way we defined the default values does not longer work (?)
Using
$.fn.select2.defaults.set
instead of
jQuery.extend($.fn.select2.defaults, {
fixes the problem.
It restores the allowClear setting.
There is a change in the behavior here, the selection opens when the
clear button is clicked. That is coming from a change in Select2
apparently. We may want to hack something to restore the precedent
behaviour.
This patch also removes the redefinition of the width. It seems that the
issue that this code was trying to correct is now fixed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
