Sponsored-by: Catalyst IT, New Zealand
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the classes to the template files so that the plugin hook can identify that cover images are required and where to inject them
Test plan as per first commit
Sponsored-by: PTFS Europe
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Go go the plugin admin page
upload a plugin
Notice that the "Actions" column is not longuer sortable
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch implements the code to allow a patron to receive multiple
orders at the same time in /cgi-bin/koha/acqui/orderreceive.pl page
To test:
1. apply all patches
2. updatedatabase
3. Go to system preferences and allow AcqReceiveMultipleOrderLines
4. In acquisitions module, create a vendor if you don't have one and add
3 baskets.. one with create items on ordering, one with create items
on receiving and finally one with create items when cataloguing
5. Fill baskets with orders (There should be at least 15 orders in total). There should be a mix of orders created by suggestions, others by subscriptions and others by neither of those methods.
6. Close all baskets and receive shipment.
CHECK => in /cgi-bin/koha/acqui/parcel.pl page, in top table there is a column with checkboxes, and a button that says "Receive selected"
7. If all orders from all baskets are shown in the table, set the rows per page to 10, so table has more than one page
8. Check some of the checkboxes
CHECK => "Receive selected" button shows how many rows are selected
9. Go to the next page and select some more rows
CHECK => Changing page does not modify how many rows where selected
10. Go back to previous page
CHECK => Previously selected rows are still selected
11. Reload the page to deselect all rows
12. Select only one row and click on "Receive selected" button
CHECK => the page /cgi-bin/koha/acqui/orderreceive.pl behaves just the same as if the "receive" link in the selected row would have been clicked.
13. Click on cancel to go back to parcel.pl page
14. Select all rows (even the ones from the next page of the table) and
click on "Receive selected"
CHECH => In orderreceive.pl page there is a table with all selected rows
15. Ensure table has more than one page, as in step 7
16. Click on the "edit" link in the last row of the current page
CHECK => A modal window is displayed with 4 tabs within: Info,
Accounting, Receipt history and Items
CHECK => Modal has 4 buttons at the bottom, 'Previous' to go to previos
order, 'Cancel' to close the modal without keeping modifications, 'Save'
to close modal keeping modifications and 'Next' to go to the next order
CHECK => Even that we are at the end of the current page, 'Next' button
is still available
17. Click on 'Next' button
CHECK => The table behind the modal now displays the next page, and the modal was not closed
18. Click on 'Previous'
CHECK => The table behind the modal went back to the first page, and the modal was not closed
19. Click on 'Previous' button till you reach the first row of the first
page
CHECK => Only when you reach the first row of the first page 'Previous'
button gets disabled
20. Click on 'Next' button till you reach the last row of the last page
CHECK => Only when you reach the last button of the last page 'Next'
button gets disabled
21. Check that behaviour for the different types of order are still the
same
a. For orders that where created through suggestion, check that the
suggestion info is present in Info tab. If when suggestion was accepted
you set a reason, a dropdown to change the reason shoul display also.
b. For orders that where created through subscriptions, check that
the Items tab is disabled, and the Receipt history is enabled. On
accounting tab you should be able to change quantity ordered. If there
were less items received than ordered, the next time you receive this
order the child order generated from this one shoul appear in receipt
history.
c. For orders that don't come from subscription and creates there items on ordering, Receipt history
should be disabled, and a table with prefilled items shold appear in the
Items tab. You can edit them and the changes should appear in the item's
row.
d. For orders that don't come from subscription and creates there
items on receiving, Receipt history should be disabled, and a form to
create the items should appear in Items tab. When you add an item a
table should appear.
e. For orders that don't come from subscription and creates there
ites on cataloguing, Receipt history and Items tabs should be disabled.
f. Any changes made in quantity (received or ordered) or funds in the modal should be
reflected in the table if you click save from the modal.
22. Once you've done all you checking and verifications click save
23. While saving a progress bar should appear
24. If no error was detected, you should be redirected back to parcel.pl
page
25. If an error or warning was detected (like there is an order with 0
items to receive) the save button should be disabled and warnings
are dispayed.
26. prove t/db_dependent/Koha/Acquisition/Fund.t t/db_dependent/Koha/Acquisitoin/Order.t t/db_dependent/Koha/Item.t
Sponsored-by: Virginia Polytechnic Institute and State University
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Just send the codes and descriptions only to client.
Adding a few comments to the reduce construction.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The "MARC overlay rules" page doesn't display or work correctly
if a patron category code contains a "-".
This happens because of the JavaScript function in
"marc-overlay-rules.tt" line 469. This causes an error
"Uncaught SyntaxError: missing : after property id".
Test plan:
1. Go to Administration > Patron categories.
2. Make sure you don't have a patron category code that contains
a "-".
3. Go to Administration > Record overlay rules.
4. The table should display correctly, and you can add, edit
and delete rules.
5. Return to Patron categories.
6. Add a new patron category with a "-" in the patron category code.
7. Return to Record overlay rules page:
=> The page doesn't display and load correctly (see the attached
image) - the normal DataTables header and footer aren't
displayed, and you can't add, edit or delete overlay rules.
=> If you turn on web developer tools, an error is displayed in the
console: "Uncaught SyntaxError: missing : after property id".
8. Apply the patch.
9. Repeat the step 7, the Record overlay rules page should now
display correctly and you should be able to add, edit and
delete rules.
10. Sign off.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1) Run the following test and make sure all pass:
t/db_dependent/api/v1/biblios.t
t/db_dependent/api/v1/checkouts.t
t/db_dependent/api/v1/return_claims.t
t/db_dependent/Circulation/CalcDateDue.t
t/db_dependent/Circulation/CheckIfIssuedToPatron.t
t/db_dependent/Circulation/dateexpiry.t
t/db_dependent/Circulation/GetPendingOnSiteCheckouts.t
t/db_dependent/Circulation/GetTopIssues.t
t/db_dependent/Circulation_holdsqueue.t
t/db_dependent/Circulation/IsItemIssued.t
t/db_dependent/Circulation/issue.t
t/db_dependent/Circulation/MarkIssueReturned.t
t/db_dependent/Circulation/maxsuspensiondays.t
t/db_dependent/Circulation/ReturnClaims.t
t/db_dependent/Circulation/Returns.t
t/db_dependent/Circulation/SwitchOnSiteCheckouts.t
t/db_dependent/Circulation.t
t/db_dependent/Circulation/TooMany.t
t/db_dependent/Circulation/transferbook.t
t/db_dependent/DecreaseLoanHighHolds.t
t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
t/db_dependent/HoldsQueue.t
t/db_dependent/Holds/RevertWaitingStatus.t
t/db_dependent/Illrequests.t
t/db_dependent/ILSDI_Services.t
t/db_dependent/Items.t
t/db_dependent/Koha/Account/Line.t
t/db_dependent/Koha/Acquisition/Order.t
t/db_dependent/Koha/Biblio.t
t/db_dependent/Koha/Holds.t
t/db_dependent/Koha/Items.t
t/db_dependent/Koha/Item.t
t/db_dependent/Koha/Object.t
t/db_dependent/Koha/Patrons.t
t/db_dependent/Koha/Plugins/Circulation_hooks.t
t/db_dependent/Koha/Pseudonymization.t
t/db_dependent/Koha/Recalls.t
t/db_dependent/Koha/Recall.t
t/db_dependent/Koha/Template/Plugin/CirculationRules.t
t/db_dependent/Letters/TemplateToolkit.t
t/db_dependent/Members/GetAllIssues.t
t/db_dependent/Members/IssueSlip.t
t/db_dependent/Patron/Borrower_Discharge.t
t/db_dependent/Patron/Borrower_PrevCheckout.t
t/db_dependent/Reserves/GetReserveFee.t
t/db_dependent/Reserves.t
t/db_dependent/rollingloans.t
t/db_dependent/selenium/regressions.t
t/db_dependent/SIP/ILS.t
t/db_dependent/Holds.t
t/db_dependent/Holds/LocalHoldsPriority.t
t/db_dependent/Holds/HoldFulfillmentPolicy.t
t/db_dependent/Holds/HoldItemtypeLimit.t
t/db_dependent/Circulation/transferbook.t
2) Performe one or more checkouts for a patron, making sure
that the circulation rules allows for renewals (for example by
setting an earlier due-date).
3) Log in as this patron in OPAC and make sure the list of
checkouts is displayed correctly, and that renewing an issue
still works.
Sponsored-by: Gothenburg University Library
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is Julian's patch with some extra cleanup to reduce repeated code
If AllowHoldPolicyOverride is enabled and only some pickup locations are
available, you still have the possibility to force one of the others
pickup locations.
But when there are zero pickup locations available, that is not
possible.
This patch change that by always displaying the list of pickup locations
when AllowHoldPolicyOverride is enabled.
Test plan:
1. Apply patch
2. Disable AllowHoldPolicyOverride
3. Create a biblio B with an item I at library A.
4. Configure this library A to not be a pickup location
5. Add a "Default holds policy by item type" for item I type where "Hold
pickup library match" is "item's home library"
6. Try to place a hold on biblio B
You should not be able to place a hold because there is no valid
pickup locations
7. Enable AllowHoldPolicyOverride
8. Try to place a hold on biblio B
You should now see all valid pickup locations in a dropdown list
(with an exclamation mark in front of each option) with none selected
by default
9. Verify you can place a title-level hold and an item-level hold
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Right now the holds queue builder starts filling bib-level holds with
items whose patron's home library matches the item's home library.
It would be good and reasonable to have the option to prioritize
item's whose patron's home library matches the item's holding library
to minimize transfers.
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test Plan:
1) Find record with at least 3 holds.
2) Change first holds priority as 2, Priority is changed to 3.
3) Try to change priority back to 1, Priority is changed to 2.
4) Apply this patch
5) Reload the page
2) Change first holds priority as 2, Priority is changed to 2.
3) Try to change priority back to 1, Priority is changed to 1.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Hinemoea Viault <hinemoea.viault@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Go to the OPAC, log into your account
* Make changes to your personal details and save
* Go to the staff interface and use the link on the start page to
moderate the change request
* At the top of the list you'll see something like:
Without this patch:
Ignore|Patron details
With this patch:
Ignore | Patron details
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We just figured out that multi-line TT comments show up
weirdly in translations and fixed it on bug 33332. So
this just follows the newly established pattern.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch begins reduing some of the extra things we are doing in
detail.pl that could easily be handled in the templates - fetching
authorised values and branches etc
It also removes a loop to find items that should be hidden, and instead
uses a searh parameter
The template changes either use item object rather than passed
variables, or utilize plugins to fetch authorised valued
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The previous syntax causes a warning during the execution of the translation script
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
examples: 'crayon'->'carchoal' or 'camaiu'->'cameo'
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch corrects the typo "presedence" with "precedence."
The patch also corrects some grammar:
"so if the 'library.com' domain will take presedence over
'*library.com'"
...changed to...
"so 'library.com' domain will take presedence over '*library.com'"
I also changed the <div>s inside that block of help text to <p> in order
to improve legibility.
To test, apply the patch and go to Administration -> Identity providers
-> Manage domains (on an existing provider) -> Edit, and click the
"More" button under the "Domain" field.
Confirm that the text is correct.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It should ease translatability and remove an extra space.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It seems the form didn't populate all fields form data passed in. This patch
corrects that
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We didn't include anything except the authid id in the try again form, this
patch extends to cover all the fields
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds an id to z39.50 search interface submit buttons so that
the JavaScript event for changing the cursor can be linked to that
instead of the obsolete class.
The patch also adds code copied from Bug 33233 in order to make the
"waiting" cursor revert to the default if the user uses the back button
to return to the search form.
To test, apply the patch and go to Cataloging -> New from Z39.50
- Fill in a search term and click the submit button
- Your cursor should change to a "waiting" cursor while the search is
performed, before you're redirected to the results.
- From the results page, clicking the back button (or right-clicking the
page and choosing "Back") should return you to the search form and
your cursor should be a standard pointer.
Perform the same test from:
- Acquisitions -> Vendor -> Basket -> Add to basket -> From an external
source
- Authorities -> New from Z39.50/SRU
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Disable UseControlNumber
Change biblio title to something like:
Hamlet or CHINESE_CHARS
where you add some nice Chinese chars.
Create a 765 looking for that title in another biblio record.
Without this patch, the link at detail page finds both records,
since it looks for ti-phr:Hamlet OR the Chinese chars.
With this patch, the link at detail uses quotes and finds only
one, since the OR is now part of the ti-phr search.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
** For OPAC
[1] Pick a biblio record A as original entry, fill $001/$003.
[2] Pick another biblio record B as translation, add 765 with $t,
$a and $d. Put (orgcode)cnum from A into $w.
[3] Disable UseControlNumber.
[4] Goto OPAC detail page of B. Check link; should be title based.
[5] Enable UseControlNumber.
[6] Goto OPAC detail page of B. Check link; should incl orgcode and cnum.
[7] Edit B. Replace $w with cnum of A only.
[8] Goto OPAC detail page of B. Check link; should incl cnum only.
** For staff client
[9] Goto staff detail page of B. Check link again.
[10] Edit B. Set 765 ind2 to 8, fill $i.
[11] Goto staff detail page of B. You should see different label.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Note for QA: Opened bug 33515 to see if we can use this same
function in a few other places too. Would probably reduce code
and increase consistency.
Test plan:
See next patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 30280 added the ability to use multiple thesauri for authorities in Koha.
This is a large change, and many libraries use authorities in a ess strict manner.
This patch simply adds a preference, disabled by default, to enable this new feature
To test:
1 - Find or create a record with a 650 heading, second indicator 0 (LOC)
2 - Ensure this links to an authority in your system
3 - Disable AutoCreateAuthorities, enable CatalogModuleRelink
4 - Edit the heading to second indicator 2
5 - Save, the heading does not link
6 - Apply patch, updatedatabase, restart all
7 - Edit and save record again
8 - Heading should now link to the LOC authority, despite different second indicator value for source
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a licenses option to the top searchbar
Test plan:
1) Apply patch
2) run yarn build
3) Navigate to the ERM module
4) Observe that the top search bar should have an option for licenses
5) Click on licenses in the left hand menu, the search bar should update to show licenses as the active search option
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Enable system preference ExportCircHistory
2. Create an item bundle (see bug 28854 comment 458)
3. Check out the item bundle
4. In the checkouts table, check the box in column "Export",
choose export format 'MARC with items', check "Export items bundle
contents" and click on "Export" button
The exported file should contain the biblio and item created at step
2, but also the biblio and items that are part of the bundle
Signed-off-by: Marie-Luce <marie-luce.laflamme@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marie-Luce <marie-luce.laflamme@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
https://bugs.koha-community.org/show_bug.cgi?id=25508
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This adds the missing debit and credit types to the includes, namely:
DISCOUNT, PURCHASE, PAYOUT, and VOID.
I sorted them as they appear in the GUI (alphabetically) so it's a little
easier to spot missing ones.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the credit and debit types management pages to use
the proper includes for handling system type translations. This is how
it should have been done in the first place on the original bugs that
introduced the management of these types but for some reason I think it
got dropped during the QA process leading to confusion around these
system types with their fixed descriptions.
To test:
1. Apply patch
2. Apply the translations
./misc/translator/translate install xx-XX
3. In the staff interface, go to Administration > Credit types
--> They should be translated
4. Go to Administration > Debit types
--> They should be translated
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is following recommendations from accessibility
guidelines. It being a link or button already indicates
that you need to click it. We don't need to spell it out.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Create a subscription
2. Make sure that you choose "Create an item record" when receiving the serial and associate it with a record.
3. Fill out the numbering pattern stuff and save the subscription.
4. Receive and change the status to arrived. Doing so will make the item subfields appear for editing.
5. Add some stuff, like a barcode, and Save.
6. Now, if you have made a mistake, you may want to edit the serial/item. Check the edit box and click 'Edit serials '
7. For your issue that has already arrived click 'Click to add item'. The item record from before appears.
8. Apply patch.
9. Try 6 & 7 again. The existing items should now read 'Click to edit item'
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This updates the other occurrences and adds html_line_break to all
except the edit page - it seems html or raw doesn't affect the value of the textarea,
but moved to raw for consistency
To test:
1 - Add an HTML note to a patron, make sure to add a line break:
<h1>Testing</h1>
<h2>Newline</h2>
2 - Checkout to patron and return
3 - Confirm note shows correctly
4 - Add patron to a list
5 - Confirm note displays correctly
6 - Edit patron, confirm note field is correct
7 - Batch modify borrower
8 - Confirm note displays correctly in batch list
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is a consistency patch: we already allow adding HTML tags
to the patron circulation note and the contents display
correctly in the patron account and in the patron search results
in the staff interface. But the HTML tags are printed on the
checkins page.
To test:
* Add a circulation note including HTML tags to a patron
Example: <h1>This patron is great!</h1>
* Check an item out to this patron
* Verify that the note displays formatted in patron search results
* Verify that the note displays formatted in the patron record
* Return the item
* Verify the note shows the printed tags
* Apply patch
* Check item out again and check it in again
* Verify the note now displays correctly in list of checkins
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The form for entering your authentication code shoudl not suggest
previous codes.
To test:
* Activate TwoFactorAuthentication
* Go to your patron account in staff
* More > Manage 2-factor authentication
* I used "Google authenticator" on my phone, so:
* Open app on your phone, add new and scan the QR code
* Enter activation code
* Log out of staff interface
* Log back in, you are now also asked for an authentication code
as second step
* Look up code in app, enter, get logged in
* Log out, log back in - the form now suggests the previous code
when you click on it
* Apply patch
* Reload things (restart_all on ktd)
* Verify that you no longer get the suggestion
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Patch 32555 tries to resolve the issue caused by bug 31313. But the way it is fixed seems to be
at least problematic. With patch 32555 we will never see the difference between
`serial`.`serialseq` and `items`.`enumchron` which is still intended in opac-detail.tt
(line ~ 1332) and [intranet] catalogue/detail.tt (line ~ 446). This is because
ITEM_RESULT.serialitem (in opac-detail.tt) and item.itemserial.serial (in catalogue/detail.tt)
refer to non-existing things. (and therefor the problem described in 32555 no longer emerge).
The original problem is caused by mixing up serialitem with serial in [opac-]detail.pl
and passing serialitem instead of serial to both templates.
To test:
1. Create a serial subscription
1.1. Go to Serials
1.2. Click on New subscription
1.3. Fill out the first form
- Vendor: leave empty
- Record: enter a record number
- Create an item record when receiving this serial
- When there is an irregular issue: Keep issue number
- Manual history: leave unchecked
- Call number: leave empty
- Library: Centerville
- Public/nonpublic note: leave empty
- Patron notification: None
- Location: None
- Collection: None
- Item type: Continuing resources
- Grace period: leave empty
- Number of issues to display: leave both empty
1.4. Click Next (and confirm you are not using a vendor)
1.5. Fill out the second form
- First issue publication date: 2023-01-01
- Frequency: 1/month
- Subscription length: issues 12
- Subscription start date: 2023-01-01
- Subscription end date: 2024-01-01
- Numbering pattern: Number
- Locale: leave empty
- Begins with: 42
- Inner counter: leave empty
1.6. Click Test prediction pattern
1.7. Click Save subscription
2. Click OPAC view: Open in new window.
3. Back in the staff interface tab, receive an issue
3.1. Click Receive
3.2. In Status, choose Arrived for No. 42
3.3. IN ITEM DETAILS BELOW CHANGE h - Serial enumeration / chronology
from No. 42 to some different string
3.3. Click Save
4. Check the items in OPAC and Intranet – you will see only the value from the
item $h subfield (enumchron) instead of desired "enumchron -- serialseq"
in case of a difference between `serial`.`serialseq` and `items`.`enumchron`.
5. Apply this patch
6. Repeat 4
7. Check the items in OPAC and Intranet – you should now see the desired
"enumchron -- serialseq" string.
8. Sign off
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
Create some checkouts in future and past, make sure to include
some with a time != 23:59.CirculateILL
Verify that the due date is displayed correctly on:
* Catalog detail page > Items tab > Checkout status
* Circulation start page > Renew > Renew one of your checkouts > dialog message
* ILL request page: requires ILL setup and CirculateILL system preference
* Patron acccount in staff > Print > Print summary
* Catalog detail page > Holds > search for patron > due date on checked out items
* Recalls:
* Activate UseRecalls system preference, set up circulation rules to allow recalls
* Checkout an item to another user
* In the OPAC, place a recall on that record with yor use
* Check "Recall a specific item"
* Verify due date in item list
* Place recall on checked out item
* Patron account in OPAC > Recalls history (due date might have been changed through recall)
* OPAC patron account > Summary > Overdue tab
* Self checkout:
* Activate WebBasedSelfCheck
* Go to <opacbaseurl>/cgi-bin/koha/sco/sco-main.pl
* Log in > Tab checkouts
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
JD amended patch - removed 'fda'
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Make some daily an hourly checkouts and confirm the right display
(hourly with hours and minutes, daily only date) of due date on these
places:
1) catalogue -> checkout history
2) circulation -> overdues with fines
3) <already fixed>
4) circulation -> pending on site checkouts
5) patrons circulation history
6) opac -> account summary -> relatives checkouts
Note: I suspect the moremember-receipt.tt template is not used anymore
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes a conflict between the template-generated markup and
Bootstrap JS which were both competing to show the correct default tab.
It's simpler to rely on JavaScript.
To test, apply the patch and enable the TranslateNotices system
preference if necessary.
- Go to Tools -> Notices & slips
- Go to edit any notice e.g. DUEDGST
- The page should load with the "Default" tab selected by default.
- Enter unique titles and contents under each tab to confirm that the
data you see under the "Default" or "English (en)" tab is being shown
in the right place.
- Save your modified notice and edit it again to confirm that the tabs
correspond correctly to your data.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When ordering catalog search by relevance from advanced search, this is not visible in sort order combobox in staff interface.
This is because sort by relevance is a special case not using sort
order.
This patch add a new method C4::Context->default_catalog_sort_by to use
in both staff interface and OPAC.
Test plan :
1.0) On staff interface
1.1) Define system preferences defaultSortField = 'relevance' and defaultSortOrder = 'descending'
1.2) Perform a catalog search from main page on any term, ie 'perl'
=> You see in sort combobox 'relevance' selected (with a check icon)
1.3) Perform an advanced search on any term, ie 'perl', with sort by relevance
=> Without patch : you see in sort combobox 'relevance' not selected (no check icon)
=> With patch : you see in sort combobox 'relevance' selected (with a check icon)
2.0) On OPAC
2.1) Define system preferences OPACdefaultSortField = 'relevance' and OPACdefaultSortOrder = 'descending'
2.2) Perform a catalog search from main page on any term, ie 'perl'
=> You see in sort combobox 'relevance' selected
3.0) Run prove t/Context.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Have an item with a replacement cost checked out to a patron
2. Set the ClaimReturnedChargeFee sys pref to "Ask if a lost fee should be charged"
3. Make a claim and check the box for charging.
4. Claim happens but no charge occurs.
5. Apply patch and try again.
6. A charge should now occur.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Hinemoea Viault <hinemoea.viault@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When merging bib records the first tab (the source record) should have
all the checkboxes checked by default.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 32368 added whitespaces, remove them.
To test:
1 - Create a report like:
SELECT biblionumber FROM biblio
2 - Run it
3 - Try the various options from the 'Batch operations' button
4 - The operations don't find the biblios
5 - Create a report like:
SELECT cardnumber FROM borrowers
6 - Run it
7 - Test the batch operations
8 - They fail
9 - Apply patch
10 - Run each report again and test batch operations
11 - They work!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The Koha Community normally refers to "global system preferences"
as just "system preferences".
This updates the staff interface and other occurences to refelect
this, including:
- Administration > Global system preferences and the description
- Patrons > [a patron] > More > Set permissions > Manage Koha
system settings > Manage global system preferences
(manage_sysprefs)
- The installer files and the database (permissions table)
Test plan:
1. Note that in the staff interface "Global system preferences"
is dispalyed in two places:
1.1 Administration: Go to Administration. There is a section
called "Global system preferences" with a description
and a search box.
1.2 User permissions: View the details for a patron > More >
Set permissions > expand 'Manage Koha system settings' >
scroll down to 'Manage global system preferences
(manage_sysprefs)'
2. Apply the patch.
3. Update the database.
4. Revisit the pages in step 1 - these should now show as
"System prefereneces" or "system preferences" as appropriate.
5. Sign off!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Magnus Enger <magnus@libriotech.no>
I agree with this change, consistency is good. As far as I can see
this patch cathes all the occurrences of "global".
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
An alternate placement of the Mana KB hint on the reports start page.
To test:
* Go to Reports module
* Verify the hint shows when you haven't decided on Mana KB
* Once you set yes or no, it will no longer show
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the unnecessary second definition of the JS function PopupMARCFieldDoc from addbiblio.tt.
To test:
1. Apply the patch
2. Check that addbiblio.tt contains only one function definition for PopupMARCFieldDoc
3. Navigate to "Cataloging" -> "Add MARC record"
4. Check that after clicking on the question mark symbol next to any MARC field, the loc description of that MARC field is opened in a new tab
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Go to the Administration > Budgets page
=> FAIL: Breadcrumbs show two little house icons
2. Apply this patch
3. Reload page
=> SUCCESS: Only one icon
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several templates in the tools directory so that they
use the new WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Tools ->
- Tools home page
- Log viewer
- Search result
- Uploads
- Upload results
- Cataloging ->
- Upload local cover image
- Upload result
- Test uploading an biblio-level image from the bibliographic detail
page
- Test uploading an item-level image from the bibliograhpic detail
page's holdings table
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several templates in the tools directory so that they
use the new WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Tools ->
- Task scheduler
- Cataloging ->
- Stage MARC records for import (use a batch of MARC records which
will match existing records)
- View batch ->
- View diff of records with a match
- Stock rotation (must have StockRotation enabled)
- New rota
- Edit rota
- Manage stages
- Manage items
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This adds the white background. As we do on other pages I have
chosen to include the h2 heading within the page-section.
To test:
* Go to advanced search in staff interface
* Activate 'More options'
* Check checkbox for scan indexes
* Switch to author (especially when using Elasticsearch)
* Search for C
* On the result list verify there is no white background/page section
* Apply patch
* Repeat test - background should be present now
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nicolas Giraud <nicolas.giraud@inlibro.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adjusts the ids in the submit function
To test:
1 - Browse to tools -> Batch patron modification
2 - Enter cardnumbers and submit
3 - No patrons
4 - Enter borrowernumbers and submit
5 - No patrons
6 - Apply patch
7 - Repeat
8 - Success, patrons are listed
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several templates in the tools directory so that they
use the new WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Tools ->
- Notices and slips
- New notice
- Edit notice
- Confirm deletion
- Batch patron modification
- Overdue notice/status triggers
- Cataloging ->
- Manage staged records
- Batch details
- MARC modification templates
- Edit actions for a template
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The HTML title of the Catalog concerns management page (which
appears in the browser tab) says Catalog concerns > Tools >
Koha. But the page is under Cataloging, not Tools.
Test plan:
1. Enable the CatalogConcerns system preference.
2. Go to Cataloging > Catalog concerns:
=> The title of the page in the browser tab says Catalog
concerns > Tools > Koha
3. Apply the patch.
4. Refresh the catalog concerns page.
5. The title of the page in the browser tab should now say Catalog
concerns > Cataloging > Koha
6. Sign off 8-)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a "page-section" container around the contents of the
page seen when you complete the process of merging catalog records.
The patch also adds the "merge was successful" message into the standard
message dialog.
Perform a catalog search which will return more than one record.
- Select two records in your search results and click "Edit" -> "Merge
records."
- Complete the process of merging your selected records.
- On the last page you should see a "merge was successful" message
styled as the standard information box.
- The "Report" section should be shown inside a "page-section" div.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The Pseudonymization system preference description in
the staff interface is: "Disable/Enable pseudonymization
to comply with GDPR for personal information. Patrons and
transactions will be copied to a separate table for
statistics purpose."
GDPR is a European Union (and, at time of writing, UK) law;
it makes the system preference look irrelevant for
libraries outside this area. However, this is not correct:
pseudonymization may be useful for libraries anywhere.
This generalized the system preference description and
only uses GDPR as an example instead of the only purpose.
It also updates the fields listed to more closely reflect
the labels on the patron form.
To test:
* Search for "Pseudonymization" in the systme preferences
* Verify that the description of the system preference is
very GDPR
* Apply patch
* Verify the system preference description is improved
https://bugs.koha-community.org/show_bug.cgi?id=33196
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Makes sure the focus is in the first form field when adding
a new OAI set: setSpec
To test:
* Go to administration > OAI sets
* Add a new set, verify the focus is still in the search bar on top
* Apply patch
* Repeat and verify the focus is now in the first form field
* Save set
* Edit set and verify the focus is in the search field at the top
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This makes sure that the focus is in the first form field when
adding a new Z39.50 or SRU server.
To test:
* Administration > Z39.50/SRU servers
* Add a new server for each
* Verify the focus is not in the form
* Apply patch
* Verify the focus is now in the first form field
* Edit an existing server
* Verify the focus is not in the form
Not having the focus when editing is to avoid accidental changes.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
During a Webinar discussion regarding the new placement of the circulation messages appearing in the Patron Detail page. It was commented by a librarian that it would be nice to have the circulation messages editable. At times libraries need to keep a specific message on a patrons account with the details such as what branch it was written from and the staff member that wrote it, but it would be nice to be able to edit this message.
Test Plan:
1) Apply this patch
2) Restart all the things!
3) Browser to a patron record
4) Create a new patron message
5) Note the patron message now has an "edit" button
6) Edit the existing message using the edit button and form
7) Check the action logs for that message, note there is a modification
logged to that message if BorrowersLog is enabled
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
GDPR is a European Union (and, at time of writing, UK) law.
The GDPR_Policy system preference is about a patron
giving consent to their personal data being processed in
line with the library's privacy policy.
The name of the preference is vague: there could be
many policies implemented by libraries to comply with
GDPR. It also makes the preference look irrelevant for
libraries outside the areas where GDPR applies, while
it may be useful for libraries anywhere.
This renames GDPR_Policy to PrivacyPolicyConsent and
adjusts the system preference descriptions.
To test:
* Apply the patch
* Run database update
* Search for GDPR_Policy in the system preference
- you should not find anything.
* Search for DataPrivacyConsent in the system preferences
- you should find it and be able to activate it
* Verify the feature works as expected
- If the preference is set to "enforced", you will be
asked to give consent to the data privacy agreement
in the OPAC when you log in
* Verify the page is now phrased neutrally using 'privacy policy'
Bonus: Consent date is now formatted according to DateFormat
system preference.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We could then reuse it for the contacts code in this same template, on
another bug report.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patchset is adding the ability to create interfaces for vendors.
An interface is a website, software, or portal that you use to manage orders or
gather statistics from the vendor/organisation.
It will help librarians to keep track of those different information
within Koha.
* new DB table aqbookseller_interfaces(id, vendor_id, type, name, uri,
login, password, account_email, notes)
* new AV category VENDOR_INTERFACE_TYPE with 3 example values ADMIN,
ORDERS, REPORTS
* new pair of Koha classes Koha::Acquisition::Bookseller::Interface[s]
* new method to retrieve the interfaces from the vendor
Koha::Acquisition::Bookseller->interfaces
* Add/Delete interfaces when editing a vendor
* Display the interfaces on the vendor show view
Test plan:
- Add a new vendor
=> Notice the new "Interfaces" block
- Create some interfaces
=> They are display on the vendor show view
=> The password is hashed and can displayed on the demand
QA Note:
The "contacts" code is not very nice and I didn't want to replicate it,
so I went another way and tried to make the code reusable, for further
reutilisation.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch replaces the 'Print' button with a 'Receipt' menu dropdown
exposing 'Print' and 'Email' options when `UseEmailReceipts` is enabled
Test plan
1. Enable `UseEmailReceipts`
2. Navigate to a patron with paid charges
3. Note the new dropdown 'Receipt' menu
4. Confirm 'Print' works as expected
5. Confirm 'Email' works as expected
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a warning on about.pl regarding database row formats
other than "DYNAMIC". It points to the Koha community wiki for more
information on how to resolve the problem.
This patch also stops the installer if there are any database tables
with a row format other than "DYNAMIC". It points to the Koha community
wiki for more information on how to resolve the problem.
Test plan:
0a. Apply the patch
0b. koha-plack --restart kohadev
1a. koha-mysql kohadev
1b. ALTER TABLE tags ROW_FORMAT=COMPACT;
2. Go to http://localhost:8081/cgi-bin/koha/about.pl
3. Note that there is a warning about database row formats
4a. koha-mysql kohadev
4b. ALTER TABLE tags ROW_FORMAT=DYNAMIC;
5. Go to http://localhost:8081/cgi-bin/koha/about.pl
6. Note that there is no warning about database row formats
7a. Manually change the version in Koha.pm to a higher version
7b. koha-plack --restart kohadev
8a. koha-mysql kohadev
8b. ALTER TABLE tags ROW_FORMAT=COMPACT;
9. Go to http://localhost:8081/
10. Log into the web installer and click through until you reach
a warning telling you that you have database row formats other
than 'DYNAMIC'
11. Note that you can't progress with the installer until
this problem is resolved
12a. koha-mysql kohadev
12b. ALTER TABLE tags ROW_FORMAT=DYNAMIC;
13. Refresh the page or redo the web installer process
14. Note that you're no longer blocked from running the installer
due to database row format
15. Undo your change to Koha.pm
16. Profit
Note: Due to bug 32665 you'll see an unrelated warning on
step 3
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Use kohaTable requesting the REST api instead of the old KohaTable
Co-authored-by: Tomás Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Have advanced editor turned on.
2. Load a record with many lines and see that not all the lines appear until you click on the visible ones.
3. Apply patch and try again
4. All lines should load.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The table with items created by the inventory tool was
missing the page-section class and therefore had no
white background.
To test:
* Go to cataloguing > inventory
* When you don't have a lot of data: just submit the form
* Look at the result list, confirm missing white background
* Apply patch
* Confirm the background is now correct
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes some changes to the 'scan index' page.
* Updates second h1 heading "Scan index:" to h2 level heading "Scan index"
* Removes table from the search form
* Moves search index pull down and search term into one line
* Reorders options with search index first and search term after, matching
the advanced search form
* Removes the catalog results toolbar from the top, card hold etc. are not needed
here.
* Fixes doubled up id attribute: scan-index by turning one into scan-index-term.
To test:
* Go to advanced search in staff interface
* Activate 'More options'
* Check checkbox for scan indexes
* Switch to author (especially when using Elasticsearch)
* Search for C
* Check display, especially search options, options at the top of the page etc.
* Apply patch
* Verify changes listed above
* Regression test the normal search results, all should look the same with and without patch.
* If you think the scan index page is nicer now - sign off.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The pull down with search options had the wrong index
linked to the Series entry: su instead of se
To test:
* Go to advanced search in staff interface
* Activate 'More options'
* Check checkbox for scan indexes
* Switch to author (especially when using Elasticsearch)
* Search for C
* Verify search results link to authors using c
* Switch to series
* Verify search results use 'su' for subject
* Verify that search option pull down always jumps back to first
entry: Any word
* Apply patch
* Verify the search results for series now use correct index se
* Verify that coming from advanced search, the correct search option is selected
* Verify that changing the search option also keeps the selection after searching
Note: with Elasticsearch and default configuration author, title and series will
give you results.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several templates in the tools directory so that they
use the new WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Tools ->
- Pages ->
- View a page in the staff interface
- Upload patron images
- Upload results
- Quote editor
- Quotes upload
- OPAC problem reports (must have OPACReportProblem enabled)
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several templates in the tools directory so that they
use the new WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Tools ->
- Batch extend due dates
- Access files (it is not necessary to have file access configured to
test, there are no variations to the breadcrumbs)
- News, HTML customizations, and Pages: For each category check each
variation:
- List of entries
- New entry
- Edit entry
- Cataloging ->
- Batch record deletion
- Item modifications by age
- Edit rules
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several serials templates so that they use the new
WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Serials ->
- Manage frequencies
- New frequency
- Edit frequency
- Manage numbering patterns
- New numbering pattern
- Edit numbering pattern
- Search subscriptions -> View subscription details
- If necessary, edit the subscription to enable "Manual
history"
- Under the "Planning" tab of the detail page, click
"Edit history"
- If necessary, edit the subscription and select a notice under
"Patron notification."
- Under the "Information" tab of the subscription detail page,
click "subscribers"
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several serials templates so that they use the new
WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Serials ->
- Serials home page
- New subscription
- Serials search results
- Subscription details -> Edit subscription
- Subscription details -> Serial collection -> Edit serials
- Select one or more seach results and click the "Edit selected
serials" to test the batch edit page
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several reports templates so that they use the new
WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Reports ->
- Most circulated items
- Report results
- Items with no checkouts
- Report results
- Catalog statistics wizard
- Report results
- View dictionary
- New definition (steps 1-5)
- Saved reports
- View report
- New report
- Edit report
- Guided reports
- Build a report
- Steps 1 through 6
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Go to Koha Administration -> Global system preferences
2. Go to a tab with a few headings like Circulation
3. Click on a heading in the sidebar navigation under Circulation that takes you a bit down the page, like Recalls
4. Notice this anchor link does not work, you are not taken to the recalls preferences
5. Apply patch
6. Try again, the links should take you to the proper place.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch create a "apply_flatpickr" JS function to make the code
reusable from the template, where we loop over the date inputs to
reinstantiate flatpickr.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Set the CaimReturnedLostValue system preference to one of your LOST authorised values
2. Check out an item
3. In the checkouts table, claim return
4. Notice the processing icon keeps spinning
5. Apply the patch
6. Check in the item and resolve the return claim to clear it
7. Check out an item
8. In the checkouts table, claim return
9. Confirm the checkouts table reloads and the return is claimed as expected
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In the patron_to_html function we were dealing explicitly with the case
where patron may be passed undefined, but forgetting that it may be
returned as 'null' from the api too. Changing from `( patron ===
undefined )` to `( patron == null )` is the recommended approach for
detecting 'undefined or null' in javascript.
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Works as advertised. Martin's test plan from Bugzilla:
To test.
1) Use ILS-DI to renew an checkout
2) View the circulation history for the item
3) Click the 'View' button next to the count of renewals
4) Note that the modal just stalls at 'Retrieving renewals'
5) Apply the patch
6) Now the 'retrieving renewals' message should list the renewals instead.
Note that step 2 should be something like "Go to the "Circulation
history" of the patron.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The error currently breaks some of the functionality for
updating patron attributes linked to AV values. With the
bug, the input field will not change to the AV list when selected
from the pull down of patron attributes.
It was probably bug 29648 that changed the data structure
without adapting for the additional data that is pushed
to the object for the patron attribute columns.
To test:
* Create several extended patron attributes
* Make sure at least one is linked to an AV
* Repeatable and unique patron attributes can't be
updated in batch patron modification, so you need some
that can be modified.
* Go to tools > batch patron modification
* Enter one or more cardnumbers to update
* Verify the table is missing columns, export and configure
* Verify when selecting the AV tied patron attribute, the input
remains a text one
* Apply patch
* Both should work now as expected
Note: I believe there are some more errors on this page,
but they should better be handled separately. So with this
patch we push configuration again for each column to table
columns, but the very last column keeps missing from the
columns settings.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>