This will save us fetching more info if we are denying the holds
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The only bit we get form the hash is the rank and title
We can simply fetch the biblio once to calculate
no need to fetch all the info as we don't display or use it
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
New holds have found set to undef - we can do this directly
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Here the items biblionumber is either equal to the biblionumber passed
in or it is not and should be - we can just assign directly from the
item in all cases
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Search for the variables, they aren't used!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is defined but never used
To test:
1 - git grep noreserve
2 - only one ocurrence
3 - Apply patch
4 - repeat, no ocurrence
5 - Note the plural has a few uses
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Currently we loop over all the holds on the record to get a count of the reserves not
waiting and a rank for the upcoming hold
We can simply count the number of nont waiting holds and add 1
Note: Before this patch the count of holds included the new hold we were going to place
which meant rank and count were the same. I believe countaing existing holds and our
upcoming rank is the correct behavior
To test:
1 - Set OPACShowHoldQueueDetails system preference to 'Show holds and their priorty level'
2 - Place a few holds on a bib on the staff side
3 - Mark 1 waiting
4 - Attempt to place hold on the bib on the opac
5 - Note 'Your priority' and 'Number of holds' are the same number
6 - Place another hold, confirm both increase
7 - Set another hold waiting, confirm both decrease
8 - Apply patch
9 - Confirm 'Your priority' is now 1 greater than Number of holds
10 - Place a hold, set a hold waiting, confirm numbers adjust as appropriate
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch replaces the call to GetTransfers in opac-reserve with the
get_transfer method available from the Koha::Item object
Test plan
1/ Place a reserve on an item at a different branch
2/ Trigger the transfer of the item
3/ Check the opac-reserves page for the display of the current transfer
status
4/ Apply patch
5/ Repeat step 3
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The idea rely on the KohaDates TT plugin for the date formatting. We
should not have any output_pref calls in pl or pm (there are some
exceptions, for ILSDI for instance).
Also flatpickr will deal with the places where dates are inputed. We
will pass the raw SQL value (what we call 'iso' in Koha::DateUtils), and
the controller will receive the same value, no need to additional
conversion.
Note that DBIC has the capability to auto-deflate DateTime objects,
which makes things way easier. We can either pass the value we receive
from the controller, or pass a DT object to our methods.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds an explanation when a hold cannot be placed, in some situation:
tooManyReserves
tooManyHoldsForThisRecord
tooManyReservesToday
itemAlreadyOnHold
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This reduces lookups for the related items that we now fetch in the templates
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To get the host items we need to search all items, not those limited to the
same biblionumber
To test:
1 - Enable EasyAnalytics
2 - Attach an item to a record
3 - Confirm it is listed in the items list on opac reserve
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 27272 is going to remove C4::Items::GetItemsInfo in favour of Koha::Items->search_ordered.
Here we are going to deal with opac-reserve
Test plan:
List items on the modified view and confirm that all the info is
displayed correctly
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
$itemLoopIter->{reservedate} = $first_hold->reservedate,
$itemLoopIter->{ExpectedAtLibrary} = $first_hold->branchcode;
1st line ends with a comma instead of a semicolon.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Before this patch the date formatting for the due date was done
in the .pl instead of the template and the branchcode would show
instead of the library's name in the list of items when placing
an item level hold in the OPAC.
To test:
* Find or create a record with mulitple items
* Check out one of the items
* Place a record level hold
* Return an item to set to waiting
* Place an item level hold
* Go to the OPAC and start placing an item level hold
* Verify the messages in the item table show the branchcode
* Apply patch
* Only visible change should be the library name replacing the branchcode
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
JD Amended patch:
-# FIXME Special case here
- print "Biblio not found\n,";
+ print "Biblio not found\n";
- my $biblio = Koha::Biblio->find($hostbiblionumber);
+ my $biblio = Koha::Biblios->find($hostbiblionumber);
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The current situation is that biblio-level holds can be assigned an item
type, so they can only be fulfilled by items matching that specified
item type (be it item-level itype or the fallback to biblio-level).
But there's the situation in which max holds limits for a specific item
type can be overridden by using biblio-level holds with item type
selection (AllowHoldItemTypeSelection) enabled.
To test:
1. Have a patron of category 'Staff' (S)
2. Have 3 records with items with the 'BK' item type, and maybe others
3. Enable AllowHoldItemTypeSelection
4. Set a limit of 2 max holds for that category+item type
5. In the OPAC. Place bibio-level holds, with item type contraint to 'BK' on those 3 records
=> FAIL: You can place the 3 holds
6. Cancel the holds
7. Apply this patch and restart all
8. Repeat 5
=> SUCCESS: You can only place 2 holds
9. Run:
$ kshell t/db_dependent/Reserves.t
=> SUCCESS: Tests pass!
10. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When system preference is off, call no code related to Koha::Recalls.
Also add some missing module import.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
- place a biblio-level or item-level recall via the biblio detail page, OPAC search results, or course reserves
- view or cancel your active recalls from 'your summary' recalls tab
- view all active and inactive (and cancel active) recalls from 'your recall history'
- stopped from placing a reserve on an item that the patron has already recalled
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The method Koha::AuthorisedValues->authorised_value is not covered by tests!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a 'holdable' and 'unholdable' class to the rows of the table
Additionally I rename the 'backgroundcolor' field to 'onloan' as that is what it contains.
Note: Out of the box, there is no css associated with this class
I add a div around the table to allow hiding the new buttons as well when optiuons are hidden
It would be nice in the future to utilise a Koha table here, however, it is complicated by multi-holds
To test:
1 - Add a number of items to a record, ensuring they belong to different libraries
2 - Set 'Default checkout, hold and return policy'->'Hold policy' to 'From home library'
3 - Sign in to opac and attempt to placehold on the record
4 - Click 'show more options' and 'a specificitem'
5 - Note holds table includes items that cannot be held
6 - Apply patch
7 - Reload holds page
8 - Note items that cannot be heldare hidden
9 - Click 'Show unholdable items' and note they appear
10 - Click 'Hide unholdable items' and veriofy they hide
11 - Test with multi holds
Signed-off-by: The Minh Luong <the-minh.luong@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Most of the changes here are simple, this can be read to view the changes
Testing that holds can be placed via staff client, and opac, and are disallowed
when expected is the best test plan, beyond running the unit tests
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds public note to the table of information shown about
items when placing a hold on a specific item in the OPAC.
To test, apply the patch and check Administration -> Circulation and
fine rules. You should have at least one patron category/item type
configured to allow OPAC item level holds.
- Modify an item to add information to the "Public note" field.
- Locate that record in the OPAC and place a hold on it.
- On the "Placing hold" page, click "Show more options" and "A specific
item."
- In the table of items you should see a "Notes" column showing the
information you added to the item.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The expiration date picked by the patron (or librarian) when placing a
hold is lost when a waiting hold is reverted.
We need a separate DB field to store this value and restore it when
needed: patron_expiration_date
The new behaviours are now:
Create a hold and specify an expiration date:
expirationdate=patron_expiration_date
Fill the hold:
expiration_date is calculated
expiration_date set to the calculated value or to
patron_expiration_date if anterior
patron_expiration_date not modified
Revert the waiting status:
expirationdate set back to patron_expiration_date
Cancel expire reserves:
if < expirationdate OR < patron_expiration_date
Note: This change should not be needed but won't hurt
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Florian Bontemps <florian.bontemps@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We should not explode if the biblionumber passed in not in DB.
Test plan:
Hit /cgi-bin/koha/opac-reserve.pl?biblionumber=42424
and notice the error message.
Without this patch you got
Can't call method "holds" on an undefined value at
/kohadevbox/koha/opac/opac-reserve.pl line 172
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
See bug 24185, this avoids looping every each item of the record for every item of the record
How to reproduce:
1) on freshly installed kohadevbox create/import one book,
remember that biblionumber for later use it in down below,
2) add 100 items for that book for some library,
3) find some patron, that patron's card number we will
use as a borrower down below to open holds page,
4) check for the rule or set up a single circulation rule
in admin "/cgi-bin/koha/admin/smart-rules.pl",
that rule should match above book items/library/patron,
check that rule to have a non-zero number of holds (total, daily, count) allowed,
and, IMPORTANT: set up "On shelf holds allowed" to "If all unavailable",
("item level holds" doesn't matter).
5) open "Home > Catalog > THAT_BOOK > Place a hold on THAT_BOOK" page
("holds" tab), and enter patron code in the search field,
or you can create a direct link by yourself, for example, in my case it was:
/cgi-bin/koha/reserve/request.pl?biblionumber=4&findborrower=23529000686353
6) it should be pretty long page generation time on old code, densely increasing for every hundred items added. In the case of this solution, it's fast, and time increases a little only, linear.
In testing with 100 books I went from ~6.5 seconds to ~3.2 seconds
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
It is a confusing name because we have 'Article Request' as a feature,
and this does not follow Koha terminology.
Test plan:
`updatedatabase` and confirm that the syspref has been renamed
`git grep RequestOnOpac` => No occurrence in the code
QA: The syspref's value is always retrieved using Koha.Preference from
.tt files, we don't need to send it from controllers or C4::Auth
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We are using Koha::Logger when it makes sense to keep the info,
otherwise we simply remove it
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 28572: Replace missing occurrence in misc/admin/koha-preferences
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is a "debug" parameter we are passing from the controller scripts
to C4::Auth::get_template_and_user, but it's not actually used!
Test plan:
Confirm the assumption
Review the changes from this patch
Generated with:
perl -p -i -e 's#\s*debug\s*=\>\s*(0|1),?\s*##gms' **/*.pl
git checkout misc/devel/update_dbix_class_files.pl # Wrong catch
+ Manual fix in acqui/neworderempty.pl
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch defaults the holds pickup location to the items homebranch or the patron's branch when a group option is selected
for the hold fulfillment policy and the patron is not allowed to choose the branch on the OPAC
To test:
1 - Set 'Default checkout, hold and return policy' -> 'Hold pickup library match' to item's hold group or patron's hold group
2 - Set OPACAllowUserToChooseBranch to 'Don't allow'
3 - Try to place an item level hold on the opac
4 - Ka-boom, etiher:
The method Koha::Item->patrongroup is not covered by tests!
The method Koha::Item->itemgroup is not covered by tests!
5 - Apply patch
6 - Repeat
7 - Note the pickup location is set to either the patron's branch or the items homebranch
8 - Repeat plan with the other group setting
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new type of system preference entry option: patron
category. A preference with this type will show either a <select> with
patron categories to choose from or a multiple-select menu for choosing
one or more.
This prevents possible errors from incorrect category codes being
entered manually.
To test, apply the patch and run the database update.
- Go to Administration -> System preferences.
- Test each of the updated preferences to confirm that the available
options are correct and that your selections are correctly saved.
- Single category selections, PatronSelfRegistrationDefaultCategory
and GoogleOpenIDConnectDefaultCategory. With each of these you
should see a dropdown where you can select of all the existing
patron categories.
- Multiple selections, OPACHoldsIfAvailableAtPickup and
BatchCheckouts: These preferences should have an option for
selecting one or more system preferences at once.
- Test the pages affected by the updated system preferences:
- With BatchCheckouts enabled, confirm that the batch checkout page is
correctly limited by patron category.
- Set the OPACHoldsIfAvailableAtPickup preference to "Don't allow" and
select at least one patron category in the
OPACHoldsIfAvailableAtPickupExceptions preference.
- Log in to the OPAC as a patron whose category was not selected in
the OPACHoldsIfAvailableAtPickupExceptions preference.
- Try to place a hold on an item which is available at a library.
- When confirming the hold, the libraries where the item is available
should be disabled in the "Pick up location" dropdown.
- Repeat the process as a patron whose category was selected in
OPACHoldsIfAvailableAtPickupExceptions. There should be no disabled
pickup locations.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The method Koha::Items->itemnumber is not covered by tests!
Trace begun at /kohadevbox/koha/Koha/Objects.pm line 592
Koha::Objects::AUTOLOAD('Koha::Items=HASH(0x55981fd94790)') called at /kohadevbox/koha/opac/opac-reserve.pl line 465
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch leverages on bug 24254's
Koha::Items->filter_by_visible_in_opac to filter out items that
shouldn't be presented to the end user in the OPAC interface.
To test:
1. Circulation and Fine rules for item-level holds are set to allow.
2. Setting the OpacHiddenItems preference to "ccode: [SUPPRESS]"
3. An item with collection Code Suppress is set.
4. Search for the title in the OPAC.
=> SUCCESS: The Suppress ccode item isn't shown.
5. View the detail page for the title.
=> SUCCESS: The suppress ccode item isn't shown.
6. Place a hold on the item:
-- Click "Show more options"
-- Select "A specific item"
=> FAIL: the ccode with the opachiddenitems rule has an item that appear in the list to place a hold
7. Apply this patch and repeat 6
=> SUCCESS: The item doesn't show!
8. Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It defaults to 0 in get_template_and_user
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Set a rule to allow multiple holds on a title
2 - Place a single hold in the opac for a patron
3 - Return to record and attempt place a second hold
4 - Note there is no message but that you must match the type placed before (item or record level)
5 - Don't place the hold
6 - Apply patch
7 - Attempt to place second hold again
8 - Note there is a message informing you of which level hold you may place
9 - Test with both item/record level holds and placing a single request or multiple requests
Signed-off-by: Donna Bachowski <donna@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We certainly faced 3 similar bugs due to this syntax: bug 23006, bug
22941 and bug 17526.
To prevent other issues related to this syntax this patch suggests to
replace them all in one go.
Test plan:
Confirm that the 2 syntaxes are similar
Eyeball the patch and confirm that there is no typo!
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The number of parameters of AddReserve makes it hard to read and
maintain.
This patch replace it with a hashref, which will make the calls more
readable.
Moreover the bibitems has been removed as it was not used by the
subroutine.
Test plan:
- Make sure the tests pass
- Read the diff and search for typos
- Place a hold on few items
Note for QA: reservation_date and expiration_date do not match the DB column's names,
should we?
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
