Bug 9978 should have fixed them all, but some were missing.
We want all the license statements part of Koha to be identical, and
using the GPLv3 statement.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch does the actual removal of the PerlDependancies module.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patchset adds support for extracting 'max_ver' from the cpanfile so
we can use version ranges properly and report errors if we have modules
installed that do not fit within that version range.
Test plan:
1) Manually modify the module version of a required module in the cpanfile
to have a max version greater than the version you have installed.
2) Run through the install proceedure and note the new warning that a
module needs upgrade for the module in question.
3) The module should also be reported in the about page
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
cpanfile is a format for describing CPAN dependencies for Perl
applications.
It is more concise - thus easier to read and maintain - than
C4::Installer::PerlDependencies, and allows to describe requirements
more accurately (using version ranges or features for instance)
Additionally it can be read by tools such as cpanm or carton for an
easy way to install dependencies on non-Debian-based systems.
For more information on cpanfile, see
http://search.cpan.org/~miyagawa/Module-CPANfile-1.1002/lib/cpanfile.pod
This patch replace C4::Installer::PerlDependencies by an equivalent
cpanfile and update all scripts/modules that were using PerlDependencies
It also removes dead code from C4::Installer::PerlModules (some
subroutines were not used at all, except in unit tests)
Added dependencies:
- Module::CPANfile
- CPAN::Meta (dependency of Module::CPANfile, but we need a more recent
version than the one Module::CPANfile requires)
Test plan:
1. Go to About page, tab Perl modules and keep this browser tab open
2. Apply patch
3. Install Module::CPANfile and CPAN::Meta
a. On Debian-based systems:
# will install libcpan-meta-perl as a dependency
sudo apt install libmodule-cpanfile-perl
b. Others:
# will install CPAN::Meta as a dependency
sudo cpanm Module::CPANfile
4. In a new browser tab, go to About page, tab Perl modules and compare
the table with the one in the previous browser tab
They should be identical, except for newly added dependencies
(Module::CPANfile and CPAN::Meta)
5. Do a 'standard' install
a. perl Makefile.PL (select 'standard')
b. make
c. sudo make install
d. Configure your database, web server, ... and go through the web
install process
6. Verify that the cpanfile got copied into PERL_MODULE_DIR (which
should be /usr/share/koha/lib)
7. Go to the about page of this fresh install and compare it with your
dev install
8. Verify that debian/list-deps still works
This takes a lot of time and it may not be necessary to wait until
the end. If you see some Debian package names that correspond to
modules in cpanfile, it means it still works
(you need apt-file for this script to work)
9. Verify that koha_perl_deps.pl still works
10. prove t/Installer_pm.t t/Installer_PerlModules.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
There is something wrong between the logic in Koha::Cache->new and our
dependencies.
We are having Cache::Memcached required, but
Cache::Memcached::Fast::Safe is optional.
However, in Koha::Cache->new we are initializing the Memcached cache
only if Cache::Memcached::Fast::Safe is installed.
We could fix the logic in Koha::Cache, but it seems better to make
Cache::Memcached::Fast::Safe mandatory (especially after bug 13193).
Note that after bug 13193, you are loosing the Memcached cache, as
Cache::Memcached::Fast::Safe will not get installed by default.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
It adds Javascript equivalent of Koha::I18N's exported subroutines, and
they are used the same way.
String extraction is done only on *.js files and require gettext 0.19
(available in Debian jessie, and also in wheezy-backports)
It adds Javascript library Gettext.js for handling translation and a
Perl script po2json to transform PO file into JSON.
Gettext.js and po2json both come from Locale::Simple.
There are several tools named po2json. It's simpler to integrate this
one into Koha than to check if the good one is installed on the system.
Locale::Simple is not needed.
To avoid polluting the global namespace too much, this patch also
introduce a global JS object named Koha and add some stuff in Koha.i18n
Test plan:
1. Add a translatable string in a JS file. For example, add this:
alert(__nx("There is one item", "There are {count} items", 3,
{count: 3}));
to staff-global.js
2. cd misc/translator && ./translate update fr-FR
3. Open misc/translator/po/fr-FR-messages-js.po, verify that your
string is present, and translate it
4. cd misc/translator && ./translate install fr-FR
5. (Optional) Verify that
koha-tmpl/intranet-tmpl/prog/fr-FR/js/locale_data.js exists and
contains your translation
6. Open your browser on the staff main page, change language and verify
that the message is translated
7. Repeat 1-6 on OPAC side
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works well, translation is OK and test message is displayed correctly.
Current qa-tool error is a false positive.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We replaced this module with Cache::Memcached::Fast::Safe and so do not
need to depend upon it any longer.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When a high enough number of forks try to access for example system
preferences with Koha::Cache using memcached as backend the results of
different cache requests get mixed up.
The problem is fixed by using Cache::Memcached::Fast::Safe that is a
fork safe version of Cache::Memcached::Fast.
Sponsored-by: The National Library of Finland
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described, and solves an insidious difficult to debug
problem in Koha.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This script uses Array::Utils and adds a dependency
To test:
1 - Have Koha with ES running
2 - Delete some records from ES
curl -X DELETE "es:9200/koha_kohadev_biblios/data/5"
curl -X DELETE "es:9200/koha_kohadev_authorities/data/5"
3 - perl misc/maintenance/compare_es_to_db.pl
4 - Note you are notified of problems in both indexes
5 - perl misc/search_tools/rebuild_elastic_search.pl -a
6 - perl misc/maintenance/compare_es_to_db.pl
7 - Note you are only notified about problems in biblios (assuming you don't have other issues)
8 - perl misc/search_tools/rebuild_elasticsearch.pl -b
9 - perl misc/maintenance/compare_es_to_db.pl
10 - Both counts match, no problems
Signed-off-by: Ere Maijala <ere.maijala@helsinki.fi>
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
As shown in the comments on the bug, it appears that Unicode::Normalize
is the most reliable way to strip accents from strings for this use
case.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We absolutely need that for modules.
We are enabling strict by using Modern::Perl.
Note that other modules from C4 use strict and warnings, instead of
Modern::Perl
Test plan: git grep 2505 **/*.pm should not return any results
And let's see later what needs to be fixed.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Net::Netmask is used in the new Plack::Middleware::RealIP module, which
is in turn used in the psgi plack startup script. We don't have access
to C4::Context inside the startup script and as such don't have access
to the config to work out if loading this module should be optional.
As such, I'm taking the easy route and just making the dependancy a
required one. It's small and already packaged for debian and as such
should not cause anyone any issues.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Koha has a number of features that rely on knowing the IP address of the connecting client. If that server is behind a proxy these features do not work.
This patch adds a module to automatically convert the X-Forwarded-For header into the REMOTE_ADDR environment variable for both CGI and Plack processes.
TEST PLAN:
1) Apply this patch set
2) Install Plack::Middleware::RealIP via cpanm or your favorite utility
3) Update your plack.psgi with the changes you find in this patch set ( this process differs based on your testing environment )
4) Restart plack
5) Tail the plack error log for your instance
6) Use curl to access the OPAC, adding an X-Forwarded-For header: curl --header "X-Forwarded-For: 32.32.32.32" http://127.0.0.1:8080
7) Note the logs output this address if you are unproxied
8) If you are proxied, restart plack using a command like below, where the ip you see in the logs ("REAL IP) is what you put in the koha conf:
<koha_trusted_proxies>172.22.0.1 1.1.1.1</koha_trusted_proxies>
9) Restart all the things!
10) Repeat step 6
11) You should now see "REAL IP: 32.32.32.32" in the plack logs as the remote address in your plack-error.log logs!
12) Disable plack so you are running in cgi mode, repeat step 6 again
13) You should see "REAL IP: 32.32.32.32" as the remove address in your opac-error.log logs!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Ed Veal <eveal@mckinneytexas.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This creates a new daemon, misc/z3950_responder.pl, which can respond to
Z39.50 requests. By default, it just proxies searches to Zebra.
If desired, however, it can also add a subfield to the item tags on
outgoing records with a textual description of the item's status
(checked out, lost, etc.). This is useful for certain ILL systems. These
strings can be translated using the 'Z3950_STATUS' authorized value.
Test plan:
1) Start the Z39.50 server using `perl misc/z3950_responder.pl`.
2) Connect to the server using `yaz-client 127.0.0.1:9999/biblios`.
3) Run a search, such as `find @attr 1=1016 book`.
4) Fetch the results both one at a time with `show 1` and in a batch
using `show 1+5`.
5) Turn on MARCXML using `format xml` and `elements marcxml`, and
verify that the records are still correctly fetched.
6) Enable the item status subfield by restarting the server with the
option `--add-item-status=k`.
7) Search for and fetch records, and verify that a $k subfield is
added to the item tags as appropriate. It should show some
combination of "Checked Out", "Lost", "Not For Loan", "Damaged",
"Withdrawn", "In Transit", or "On Hold" as appropriate, or
"Available".
8) Add an authorized value named "Z3950_STATUS" with any of the keys
"AVAILABLE", "CHECKED_OUT", "LOST", "NOT_FOR_LOAN", "DAMAGED",
"WITHDRAWN", "IN_TRANSIT" or "ON_HOLD", and verify that their
descriptions are used instead of the default values above.
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Stefan Berndtsson <stefan.berndtsson@ub.gu.se>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When a high enough number of forks try to access for example system
preferences with Koha::Cache using memcached as backend the results of
different cache requests get mixed up.
The problem is fixed by using Cache::Memcached::Fast::Safe that is a
fork safe version of Cache::Memcached::Fast.
Sponsored-by: The National Library of Finland
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described, and solves an insidious difficult to debug
problem in Koha.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Converted this to actual applicable patches.
I think the test plan is comment #28. -- Mark Tompsett
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plain:
1. Reindex both authorities and biblios with the -d flag to recreate the index, e.g. "perl misc/search_tools/rebuild_elastic_search.pl -v -d"
2. Check that authorities only contains authority-specific fields in Elasticsearch e.g. by fetching http://localhost:9200/koha_dev_authorities/_mappings
3. Reindex both without the -d flag and verify it works, e.g. "perl misc/search_tools/rebuild_elastic_search.pl -v"
Signed-off-by: Björn Nylén <bjorn.nylen@ub.lu.se>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
If Plack is running with several workers we must not use Cache::Memory
as L2 cache.
If a value is set from a worker, it will not be available from other
workers as the Cache::Memory instance is not shared (of course!)
Moreover we now have Koha::Cache::Memory::Lite that does the same job,
so we should not expect performance regressions by removing it.
See also the email sent to koha-devel for more info
http://lists.koha-community.org/pipermail/koha-devel/2018-December/045004.html
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Locale::Maketext does not allow correct handling of plural translation
for languages that have more than one plural forms.
Locale::Messages does.
So Koha::I18N is now a wrapper around Locale::Messages, just like
Locale::TextDomain, and export the same symbols as Locale::TextDomain.
You can refer to documentation of Locale::TextDomain to know how to use
exported subroutines.
Example usage:
__("Hi")
__x("Hi {name}", name => 'Bob')
__n("item", "items", $num_items)
__nx("one item", "{count} items", $num_items, count => $num_items)
__p("Bibliographic record", "item")
This patch also brings Koha::I18N power to Template::Toolkit templates
by adding a TT plugin.
This plugin can be used like this:
[%# USE the plugin and define some macros %]
[% PROCESS 'i18n.inc' %]
[%# tn is the equivalent of __n %]
[%# macro names can't start with underscore, t is for "translate" %]
[% tn('item', 'items', num_items) %]
Extraction of strings from templates is a bit complicated and use
Template::Parser and PPI. Template is compiled into Perl code and then
analyzed by PPI. It is slow, but should be correct even with complex
constructions.
Remove dependency to Locale::Maketext and Locale::Maketext::Lexicon
Add dependency to Locale::Messages and PPI
Test plan for translation in Perl code:
1. Open a .pl script or .pm module with your favorite text editor
2. Add 'use Koha::I18N;' in the beginning of file
3. Use one of the subroutines exported by Koha::I18N and be sure to have
a way to visualize the result (pass result to the template for
example, or simply warn and watch the log file)
4. cd misc/translator && ./translate update fr-FR # try other languages
5. Open misc/translator/po/fr-FR-messages.po and translate your
string(s)
You may need to change the "Plural-Forms" header. See
https://localization-guide.readthedocs.org/en/latest/l10n/pluralforms.html
6. ./translate install fr-FR
7. Use your web browser to go to the page that should display the
translation, change language and verify the translation is correct
8. prove t/Koha/I18N.t
Test plan for translation in templates:
1. Open a template file (.tt or .inc) with your favorite text editor
2. Add the PROCESS directive mentioned above in the beginning of file
3. Use one of the t* macros defined in i18n.inc. They are used like
their "__" equivalent, with one difference: the 'x' variants take a
hashref instead of a hash as last parameter
4. cd misc/translator && ./translate update fr-FR
5. Open misc/translator/po/fr-FR-messages.po and translate your
string(s)
6. ./translate install fr-FR
7. Use your web browser to go to the page that should display the
translation, change language and verify the translation is
correct
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This dependency is missing from the PerlDependencies.pm file.
This patch adds it.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 11401 introduced code to support Norwegian national library card.
This code is too specific to be part of Koha as it, it should be a
plugin instead.
Moreover nobody uses it, but a modified version (see comment 3).
Test plan:
Add/edit/delete patron and make sure there are no regressions introduced
by these patches
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@deichman.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Clone was not declared a dependency before. It used to be a dependency
of Hash::Merge but isn't in the recent version.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Add CGI::Emulate::PSGI to PerlDependencies.pm
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
While we get packaging sorted, Net::OAuth2::AuthorizationServer is not a
hard dependency for Koha and the feature requiring it is disabled by
default.
This patch:
- Makes the dependency optional
- Makes the unit tests for the OAuth2 client credentials flow skip if
the dependency is not met.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It implements only the "client credentials" flow with no scopes
support. API clients are tied to an existing patron and have the same
permissions as the patron they are tied to.
API Clients are defined in $KOHA_CONF.
Test plan:
0. Install Net::OAuth2::AuthorizationServer 0.16
1. In $KOHA_CONF, add an <api_client> element under <config>:
<api_client>
<client_id>$CLIENT_ID</client_id>
<client_secret>$CLIENT_SECRET</client_secret>
<patron_id>X</patron_id> <!-- X is an existing borrowernumber -->
</api_client>
2. Apply patch, run updatedatabase.pl and reload starman
3. Install Firefox extension RESTer [1]
4. In RESTer, go to "Authorization" tab and create a new OAuth2
configuration:
- OAuth flow: Client credentials
- Access Token Request Method: POST
- Access Token Request Endpoint: http://$KOHA_URL/api/v1/oauth/token
- Access Token Request Client Authentication: Credentials in request
body
- Client ID: $CLIENT_ID
- Client Secret: $CLIENT_SECRET
5. Click on the newly created configuration to generate a new token
(which will be valid only for an hour)
6. In RESTer, set HTTP method to GET and url to
http://$KOHA_URL/api/v1/patrons then click on SEND
If patron X has permission 'borrowers', it should return 200 OK
with the list of patrons
Otherwise it should return 403 with the list of required permissions
(Please test both cases)
7. Wait an hour (or run the following SQL query:
UPDATE oauth_access_tokens SET expires = 0) and repeat step 6.
You should have a 403 Forbidden status, and the token must have been
removed from the database.
8. Create a bunch of tokens using RESTer, make some of them expires
using the previous SQL query, and run the following command:
misc/cronjobs/cleanup_database.pl --oauth-tokens
Verify that expired tokens were removed, and that the others are
still there
9. prove t/db_dependent/api/v1/oauth.t
[1] https://addons.mozilla.org/en-US/firefox/addon/rester/
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
A ha! Lie about who we are, and the module will return a version.
./koha_perl_deps.pl -a
-- before patch Readonly::XS is 0
-- after patch it has a version number.
run koha qa test tools
Signed-off-by: Victor Grousset <victor.grousset@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The problem is the calls to HTTP::OAI::Header, etc.
may reference gmtime which is continually changing by
the second. By forcing time to lock for all the tests,
except the last one, we can be assured things should
not fail.
TEST PLAN
---------
install libtest-mocktime-perl
apply the patch
restart_all
in kshell, prove t/db_dependent/OAI/Server.t
run koha qa test tools
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Adds Search::Elasticsearch to Perldependencies.pm
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Edit (tcohen): I've changed the version numbers to match those Mirko has already
successfully packaged and are known to work for this patchset.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
For testing I went in Staff client to Home > About Koha > tab Perl modules
and verified that both Mojolicious (6.0) and Swagger2 (0.59) are marked
as mandatory.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 18028 removed the install_misc directory but
install_misc/UpgradeBackup.pm was still used by the 'upgrade' rule of
make.
Other files from install_misc were useless to it may be better not to
reintroduce this directory with only 1 file.
Test plan:
`make`
`sudo make install`
`make upgrade`
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test::Exception is available on Jessie and already installed when
koha-common gets installed
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The code is duplicated, variable are not set ($_), code is hard to read,
not covered by tests and the subroutine has 2 completely different
behaviors depending on the presence of the "module" parameter.
No need more ti rewrite it.
Test plan:
- Use koha_perl_deps.pl with the different options (-u -m -a -i)
- Go on the about page, "Perl modules" tab
You should not see any differences from before and after this patch
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It looks like I made a copy/paste error in a previous patch.
While the fix was working when you pass the param "module" to
version_info, it wasn't populating the version correctly
for the "all" param, which causes koha_perl_deps.pl to
think all OK modules actually need an upgrade.
TEST PLAN
0) Be on a system where you know your Koha Perl dependencies are
mostly up-to-date
1) Run ./koha_perl_deps.pl -a -c
2) Note that most modules say they need an upgrade even when
the installed version is the same as the minimum version
3) Apply patch
4) Run ./koha_perl_deps.pl -a -c
5) Note that most moduls say they're OK, especially when the
installed version is the same or greater than the minimum version
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Running koha_perl_deps.pl -u convinced me.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart
Julian Maurice
Joonas Kylmälä
Nick Clemens
Kyle Hall
Ere Maijala
Jesse Weaver
Tomás Cohen Arazi
Nicholas can Oudtshoorn
Mirko Tietgen
Jérôme Charaoui
Mark Tompsett
Mason James
Srdjan
Lari Taskula
Alex Buckley
David Cook