Some libraries don't want to force the librarians to manually confirm
each checkout when the item is checked out to another. Instead, they
would prefer to be alerted after the fact.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Enable the new syspref AutoReturnCheckedOutItems
4) Check an item out to a patron
5) Check the same item out to another patron
6) Note you are not prompted to confirm the checkout,
but are instead alerted that is had been checked out to another patron!
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: BWS Sandboxes <ByWaterSandboxes@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
Apply this patch
Go to a borrower that doesn't exist, check that the error message is
displayed and looks correct. (i.e. http://127.0.0.1:8081/cgi-bin/koha/members/moremember.pl?borrowernumber=9999999999999999)
Go to an item, subscription, biblio that don't exist, check that the
error message is correct and the links work
Go to a borrower that the logged in user doesn't have permission to see, check that the error message is correct and the links work.
Signed-off-by: Bin Wen <bin.wen@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1) Apply patch.
2) Check that there is no changed behavior with buttons or checkboxes.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This addresses most of the transfer dialogs. There are some dialogs
that I have not converted because I don't know what triggers them,
therefore I cannot test them.
The following scenarios have been addresses, and should be tested:
FOR TRANSFERS
1) Checkin with no issue, hold or transfer; not at home (AutomaticItemReturn set to Don't)
* Should give 3 options - Yes, Yes with print, or No.
* Yes and Yes with print should trigger a transfer back home.
* No should do nothing.
* Print should open a window for printing, with correct
information.
* All three options should close the modal.
TO TEST:
1) Set AutomaticItemREturn to Don't.
2) Check in an item with no issues, holds or transfers set, at a
location other than the owning library.
3) Test conditions above.
2) Checkin with no issue, hold or transfer; not at home (AutomaticItemReturn set to Do)
* Should give 2 options - Print or OK.
* Should automatically set transfer.
* Print should open a window for printing, with correct information.
* Both buttons should close modal.
TO TEST:
1) Set AutomaticItemReturn to Do.
2) Check in an item with no issues, holds or transfers set, at a
location other than the owning library.
3) Test conditions above.
3) Checkin with no issues or holds, but transfer already set
* Should give 3 options - OK, Print or Cancel.
* OK and print should not touch existing transfer.
* Cancel should remove the exisiting transfer.
* Print should open a window for printing, with correct information.
* All three options should close the modal.
TO TEST:
1) Check in an item following step 2 of either test above.
2) Check in item again, while a transfer exists.
3) Test conditions above.
WRONG BRANCH
4) If AllowReturnToBranch is not set "to any library", and the item is not checked in at the appropriate branch, the wrong-branch-modal pops up:
* Should give 1 option - OK.
* Should not check anything in or initiate a transfer.
* OK should close the modal.
TO TEST:
1) Set AllowReturnToBranch to "only the library the item is from".
You can test the other settings, as long as you pay attention to
where you are checking the item in at.
2) Check in an item at a branch other than the owning library.
3) Test conditions above.
Signed-off-by: Lisette <lisetteslatah@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To Test:
1) Place a hold on an item for pickup at another branch.
2) Check in item to trigger hold and transfer.
3) Check in item again without changing location. Note modal AND old
dialog behind modal.
4) Apply patch.
5) Check in item again without changing location. Note modal without
the old dialog.
Signed-off-by: Lisette <lisetteslatah@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
When a hold has been suspended or is waiting, the status
message appears in the Barcode column of the Holds table. This patch
fixes this by adding a separate Status column which details the status
of the Hold, whether it has been suspended, or is in transit, etc.
Test plan:
1) Place an item level hold and a 'Next Available' record level hold for
a patron.
2) View the holds in Patrons->Patron details for that Patron in the Check out and Details tabs
3) Suspend one of the holds, and note that the status appears in the
barcode column
4) Set a hold to be waiting for pickup, and note the status appears in
the barcode column
5) Apply the patch
6) Check the same holds and note that the statuses now appear in the new
column called Status, and note that if a hold has status effect that the
row reads "Hold has been placed"
7) Verify that this is the case in both the Holds tables (in Check out
tab and Details tab)
Sponsored-by: Catalyst IT
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies the display of several values in the holds to pull
report so that they can be displayed as lists instead of as chunks of
HTML generated in SQL.
This patch modifies the SQL in pendingreserves.pl so that values can be
formatted in the same way that holding branch is. The better long-term
solution is to remove SQL from pendingreserves.pl altogether, but this
is a quick fix.
This patch also makes a couple of minor markup changes to fix
validation.
To test, apply the patch and go to Circulation -> Holds to pull. To see
the changes the patch makes your holds to pull list should have titles
with multiple items at multiple branches, with call number, copy number,
and enumeration data. These values should all be displayed in bulleted
lists.
Signed-off-by: David Roberts <david.roberts@ptfs-europe.com>
Signed-off-by: Bin Wen <bin.wen@inlibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes a number of changes in order to improve the way the
staff client's header menu adjusts at narrower browser widths:
- Updated version of Bootstrap 3.3.7 which includes the "collapse"
JavaScript plugin.
- Modified default Bootstrap CSS using Bootstrap's customization tool.
These changes facilitate the removal of some custom CSS (overriding
Bootstrap) from staff-global.scss.
- Added Bootstrap config file for loading customizations at
https://getbootstrap.com/docs/3.3/customize/
- Revised button classes for buttons in Bootstrap-styled toolbars.
The modified default CSS resets the base font size in Bootstrap to
better match our global CSS. A side-effect of this is that toolbar
buttons ended up looking smaller than they should. Changing the
button class solves this.
- Restructure the header menu in order to allow different rules to
govern the appearance of the navigational part of the menu
(Circulation, Search, etc) and the user menu (Set library, My
account, Log out).
- Modify the cart JS to so that the popup works well at narrow widths.
To test, apply the patch, regenerate the staff client CSS, and clear
your browser cache.
- Log in to the staff client and observe the layout of the header menu
as you adjust the browser to various widths.
- Confirm that sections of the menu "collapse" as the window gets
narrower.
- Confirm that dropdown menus behave correctly and that links work.
- Confirm that the Cart link works as expected when the cart empty
and when it has items.
- Install and enable multiple translations, including at least one
set of sub-languages (e.g. fr-FR and fr-CA).
- Test the appearance of the language menus in the footer at
various browser widths.
- View pages with button toolbars and confirm that they appear unchanged
(e.g. biblio detail page, patron detail page).
NOTE: While this patch is intended to make improvements to staff client
responsiveness, it does so within a limited scope. There are still many
pages which do not work well at narrower browser widths.
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
In record detail page, item location is displayed with CSS using class "shelvingloc".
Many many places at intranet and OPAC can use this class.
It allows to change display in all places using CSS customisation.
This patch removes the CSS "display:block" for class "shelvingloc".
Some places where using "inline" to correct the display.
I think the display should not be managed in template.
So it will be inline by default and it can be changed by custom CSS, on all places or depending on a selctor.
Test plan :
1) Compile SCSS to CSS
2) Add to preferences IntranetUserCSS and OPACUserCSS : .shelvingloc { color:red }
3) Go to pages impacted by patch, be sure to look at cart with "more details"
4) You see item location italic and red
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
TEST PLAN
1) In Koha administration, search "BatchCheckouts".
2) Make sure "BatchCheckouts" is set at "Allow".
3) Make sure "BatchCheckoutsValidCategories" contains at least one
patron category.
5) Copy the barcode of an item and change the status document so it
cannot be loaned.
4) Choose a patron which belongs to the patron category at 3).
(their account should not be expired and they should not have active
fees preferably)
5) Go to the patron details page.
6) Click on "Batch check out".
7) Enter the item barcode.
8) Notice a number is in brackets under the column "Information".
9) Apply patch.
10) Notice the status description has replaced the number.
11) Try it with both: AllowNotForLoanOverride on and off
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch corrects the error that shows an authorized value instead of the obvious description of the document status.
TEST PLAN
1) In Koha administration, search "BatchCheckouts".
2) Make sure "BatchCheckouts" is set at "Allow".
3) Make sure "BatchCheckoutsValidCategories" contains at least one patron category.
5) Copy the barcode of an item and change the status document so it cannot be loaned.
4) Choose a patron which belongs to the patron category at 3).
(their account should not be expired and they should not have active fees preferably)
5) Go to the patron details page.
6) Click on "Batch check out".
7) Enter the item barcode.
8) Notice a number is in brackets under the column "Information".
9) Apply patch.
10) Notice the status description has replaced the number.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This is a simple fix using the right TT filter:
[% issue.date_due | $KohaDates as_due_date => 1 %]
The time part of the due date will only display if it's an hourly loan (!=23:59)
To test:
- Check out 2 items
- One with a loan period in days
- One with a loan period in hours
- Verify the the due date only shows the date part
- Apply patch
- Return items and repeat
- Verify that now the time part will show for the hourly loan
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Mikaël Olangcay Brisebois <mikael.olangcay-brisebois@inLibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
DataTables are used on enough pages in the staff client that it
doesn't make sense to put inclusion of the CSS into each template
where it is needed. This patch moves includes of datatables.css from
individual templates into the global header file.
To test, apply the patch and view various pages which have DataTables.
View various styles of DataTables, e.g.
- Full pagination, like item search results
- Four-button, like Saved SQL reports
Everything should look the same as it was.
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies staff client templates to remove the "type"
attribute from <style> tags. The attribute is no longer valid.
To test, apply the patch and confirm the changes to the templates. The
appearance of the staff client should be unchanged.
Validating pages from the staff client should not return any errors
related to the <style> "type" attribute.
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This adds some missing Price filters to some places in circulation.
To check verify the amount are displayed according to setting
of CurrencyFormat (use FR or CH for seeing a change)
Use a patron account with no pending fines at the beginning
for all tests.
1)
- Switch RentalFeesCheckoutConfirmation to "Ask"
- Check out an item with a rental charge
- Verify message is formatted correctly:
Rental charge for this item: ...
2)
- Switch RentalsInNoissuesCharge to "Don't include"
- Make sure patron has only Rental fines on their account
- Check out another item
- Verify message is formatted correctly:
The patron has unpaid charges for holds, rentals etc ...
3)
- Switch BatchCheckouts to "Allow"
- Add the patron category of your test patron to BatchCheckoutsValidCategories
- Checkout any item
- Verify the message in the information column is formatted correctly:
The patron has unpaid charges for holds, rentals etc of ...
Signed-off-by: Jasmine Amohia <jasmineamohia.student@wegc.school.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To Test:
1) Apply Patch.
2) Go to a patron checkout screen (circulation.pl).
3) Note there are no clear screen buttons in the upper right corner of
the checkout window.
4) Turn on the DisplayClearScreenButton preference.
5) Go back to patron checkout. Note the clear screen button and the new
printer icon next to it.
6) Click the printer icon. This will trigger a print slip function, and
close the patron screen.
7) Try to arrow back to the previous screen. Should go to main menu and
not the patron screen, just like the orginal close button (X).
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies several circulation templates to use the
Bootstrap grid instead of YUI.
This patch also removes obsolete "text/javascript" attributes from
<script> tags and "text/css" attributes from <style> tags in the
modified templates.
To test, apply the patch and view the following pages, confirming that
they look correct at various browser widths. For each page, test with
the CircSidebar preference both on and off.
- Catalog -> Search -> Details -> Items -> View item's checkout history
- Circulation -> Overdues with fines
- Circulation -> Transfer
- Circulation -> Patron -> Batch checkout
- Circulation -> Built-in offline circulation interface
- Synchronize
- Pending offline circulation actions
- Check out
- Check in
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies the patron detail template in the staff client so
that when a patron's registration is expired a message shows at the top
of the page along with the same "Renew" and "Edit" links which appear on
the checkout page. Links are also shown next the the expiration date in
the body of the page.
This patch also corrects the capitalization of the "Edit Details" link
on circulation.tt.
To test, apply the patch and locate a patron record which is expired.
- On the patron detail page (members/moremember.pl) you should see a
message at the top of the page.
- In the body of the page, next to the expiration date information, you
should see similar message and links.
- On the patron's checkout page the "Edit details" link in the
expiration message should have correct capitalization.
Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds borrowers.phone as 'Primary phone' in the checkout
search results. It also ads the table to columns configuration
To test:
1 - Perform a checkout search
2 - Note phone is not displayed
3 - Apply patch
4 - Note phone does not display
5 - Visit columns configuration
6 - Unhide the 'phone' column
7 - Note phone displays
8 - Ensure page functions as before patch
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
There is a typo in circulation_batch_checkouts.tt that makes Koha skip
a warning if the user cannot borrow due to circulation rules.
This patch corrects this typo.
To test:
1. In Administration > Global system preferences, 'Allow'
BatchCheckouts and enter patron categories in
BatchCheckoutsValidCategories
2. Go to Administration > Circulation and fines rules
3. Enter a rule where a certain category of patrons (that is in
BatchCheckoutsValidCategories) cannot take out a particular item type
4. Search the catalog for an item of that item type
5. Copy the barcode
6. Go into patrons and find a patron of that category
7. Click on the Batch checkout tab
8. Paste the barcode in the box and click Check out
9. It should say 'Too many checked out'
10. Apply the patch
11. Try the check out again, it should show both warnings ('Too many
checked out' and 'This patron can't check out this item per library
circulation policy')
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Using only TT plugin for authorised value description is a better code.
Test plan :
Part 1:
1.1) On a catalog with items.notforloan defined with authorized values category NOT_LOAN
1.2) Define in NOT_LOAN an authorized values 1 with description 'at the beach'
1.3) Define in NOT_LOAN an authorized values 2 with description empty
Part 2:
2.1) Set preference 'AllowNotForLoanOverride' to 'Don't allow'
2.2) Edit an item with notforloan=1
2.3) Checkout this item => You see 'Item not for loan (at the beach)'
2.4) Edit an item with notforloan=2
2.5) Checkout this item => You see 'Item not for loan'
Part 3:
3.1) Set preference 'AllowNotForLoanOverride' to 'Allow'
3.2) Edit an item with notforloan=1
3.3) Checkout this item => You see 'Item is normally not for loan (at the beach)'
3.4) Edit an item with notforloan=2
3.5) Checkout this item => You see 'Item is normally not for loan'
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
During checkout the withdrawn information is displayed in a message :
"Item has been withdrawn".
Like in other pages and like notforloan, we should display the withdrawn authorized value description.
This patch adds this display.
Add <span> so that translation does not change.
Also adds class 'co-withdrawn' (like in checkin 'ci-*' classes) to ease hidding this new information via CSS.
Test plan :
1) On a catalog with items.withdrawn defined with authorized values category WITHDRAWN
2) Define in WITHDRAWN an authorized values 1 with description 'dropped in trash'
3) Define in WITHDRAWN an authorized values 2 with description empty
4) Edit an item with withdrawn=1
5) Checkout this item => You see 'Item has been withdrawn (dropped in trash)'
6) Edit an item with withdrawn=2
7) Checkout this item => You see 'Item has been withdrawn'
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Place a hold for a patron
2 - Check the item in at the pickup location
3 - Note the holds modal does not link to patron
4 - Apply patch
5 - Check in item again
6 - Patron name in modal is a link
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1) Enable OnSiteCheckouts system preference
2) Checkout an item checking the onsite checkout checkbos in more
options
3) Go to circulation > pending on-site checkouts
4) Verify the checkout shows
5) Go to circulation > renew
6) Try to renew the on-site checkout using the barcode
7) Verify display:
onsite_checkout Continue without renewing
8) apply the patch and reload page with error message
9) verify display:
Item cannot be renewed because it's an onsite checkout
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds column configuration to the hold ratios report
DataTable.
This patch also amends some JavaScript and markup related to some
obsolete jQuery syntax: A hover function was being used to change an
element's style on hover. It has been removed in favor of using a link
and CSS>
To test, apply the patch and view the hold ratios report using a ratio
which will return multiple results. Confirm that DataTables controls
work correctly: Paging, search, column visibility, export and print.
Click a number in the "hold ratio" column of the table and verify that
it populates the "hold ratio" field in the "refine results" form in the
sidebar.
Test setting default column configurations in Administration -> Columns
settings.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies several circulation templates to use the
Bootstrap grid instead of YUI.
This patch also removes obsolete "text/javascript" attributes from
<script> tags and "text/css" attributes from <style> tags in the
modified templates.
To test, apply the patch and view the following pages, confirming that
they look correct at various browser widths:
- Circulation -> Pending on-site checkouts (enable OnSiteCheckouts
preference).
- Test with the CircSidebar system preference both on and off
- Circulation -> Overdues
- Circulation -> Holds to pull
- Circulation -> Renew
- Test with the CircSidebar system preference both on and off
- Circulation -> Bibliographic detail page -> Request article (enable
ArticleRequests system preferences)
- Circulation -> Hold ratios
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies several circulation templates to use the
Bootstrap grid instead of YUI.
This patch also removes obsolete "text/javascript" attributes from
<script> tags and "text/css" attributes from <style> tags in the
modified templates.
To test, apply the patch and view the following pages, confirming that
they look correct at various browser widths:
With each of these pages, test with CircSidebar preference both on
and off
- Circulation -> Returns
- Circulation -> Set library
- Circulation -> Transfers to receive
- Circulation -> Holds queue
- Circulation -> Holds awaiting pickup
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 13618 took care of the KohaDates output but not if it is called
with a parameter (eg. [% var | $KohaDates with_hours => 1 %]).
We could avoid unnecessary processing by removing the extra html filter.
Patch generated with the following command:
% perl -p -i -e 's/KohaDates([^%\|]*)\s?\|\s?html\s?/KohaDates $1/g' **/*.inc **/*.tt
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Edit: Fixing 'clas' typo in addorderiso2709.tt
Edit: Adding actions class to td
Edit: Fixing js error
Edit: circ/reserveratios.tt updated so that the plus icon doesn't show
if there is no link
Edit: fixing logic in circ/reserveratios.tt
Edit: merge conflicts
Edit: updating buttons to bootstrap 3, which i believe fixes the problem
in comment 16
To test:
1) Go to Acqui -> find a vendor -> view a basket
2) Click add to basket -> fill in 'for an existing record' and hit search
3) 'View MARC' and 'Order' buttons should show under an Actions column with appropriate icons
4) Click Order
5) Click add item when you are redirected to the New order page (no need to fill in any details)
6) Confirm that 'Edit' and 'Delete' buttons now show under an Actions column with appropriate icons
7) Go back to your basket and click add to basket -> from a subscription (we are skipping from a suggestion because this already has a button before my patch)
8) Confirm that 'Order' shows as a button with appropriate icon
9) Go back to your basket and click add to basket -> from an external source
10) fill in any fields and click search to bring up results
11) 'Order' should now show as a button with appropriate icons. MARC and Card preview have been moved into a dropdown menu - confirm this works as expected. Links have not been changed when clicking on a row
12) Go back to your basket and click add to basket -> from a staged file
13) 'Add orders' should now show as a button with appropriate icon
14) Go back to your basket and click add to basket -> from titles with highest hold ratios
15) 'X to order' should now show as a button with appropriate icon
Sponsored-by: Catalyst IT
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com>
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
For some reason we use 'Home' in the bread crumbs, but
'Koha' as starting point in the page title.
Changed to make consistent with other pages in Circulation.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies the checkout notes template to help compliance with
coding guidelines and interface patterns:
- Convert to Bootstrap grid
- Improve DataTables configuration
- Put buttons into a toolbar and move above selection links
Also corrected: Minor markup error in circ-nav.inc
To test, apply the patch and enable the AllowCheckoutNotes system
preference. Add a few checkout notes via the OPAC.
- Go to Circulation -> Checkout notes.
- Confirm that the page looks correct at various browser widths.
- Confirm that the first and last columns of the table of notes are
not sortable.
- The table should be sorted by default by title.
- Title sorting should ignore articles "a," "an," and "the."
- Test with the CircSidebar preference both on and off.
- With CircSidebar turn on, the checkout notes menu item in the
left hand sidebar should show a count of checkout notes.
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1 - Place a number of holds
2 - Check in the items and confirm the holds
3 - Visit /cgi-bin/koha/circ/waitingreserves.pl
4 - View the report
5 - Apply patch
6 - Confirm that the report looks the same
7 - Confirm cancelling holds works as before
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Followed test plan, patch worked as described
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Define a rule to deny renewal
2 - Checkout an item meeting this rule
3 - Attempt renew an item via the OPAC
4 - Attempt renewal via SIP
5 - Attempt renewal via staff client
6 - Verify errors are reasonable
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch addresses a few more instances of this problem which I didn't
catch in my first pass.
To test, apply the patch and clear your browser cache if necessary.
- Go to Circulation -> Check in and check in an item which has a hold.
- When the 'Hold found' modal appears the checkin barcode field
behind it should be disabled.
- When the modal is dismissed the checkin field should be enabled
again and focus should be on that field.
- Go to Administration -> Library groups.
- Click the "Add group" button. The cursor focus should be on the
title field.
- Go to Tools -> MARC modification templates.
- Click the "New template" button. The cursor focus should be on the
name field.
Signed-off-by: Cori Lynn Arnold <carnold@dgiinc.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch has been generated with the script provided on bug 21576.
It only affects variable used in the href attribute of a link *when*
href it the first attribute of the node (grep "a href")
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Why? Because we must filter the variables when we display them.
If we escape them on assignement, they will be double escaped:
[% XXX = "<span>pouet</span>" | html %]
[% XXX | html %]
=> <span>pouet</span>
Also it will bring trouble if we are assigning a structure (see bug
21663 for instance).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Sometimes libraries want to see internal notes on the overdue
reports page, this patch adds the notes.
Additional fixes:
- Library column was always empty, now library displays
- Replacement price was not formatted according to CurrencyFormat
To test:
- Make sure you have some overdue issues in your system
- Circulation > Overdues report
- Make sure everything displays as it should
- Verify internal item note shows
- Verify price is correctly formatted (syspref CurrencyFormat)
- Library shows
- Download list of overdues
- Verify the new column displays
Signed-off-by: Spencer <ssmith3@mckinneytexas.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: remove the branchcode line, added on its own bug report,
see bug 21463
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 21076 fixed a Javascript error on article requests page when patron is found.
There is also an error when patron is not found, with message :
Patron not found
No patron with this name, please, try another
This patch fixes by replacing TT condition by a JS condition testing the existance of the patron input.
Test plan:
1 - Do not apply patch
2 - Enable article requests
3 - Search on staff client and click 'Request article'
4 - Search for a patron that does not exist
5 - You get a yellow message "Patron not found"
6 - View error in console
7 - Apply patch
8 - Reload
9 - Not error is gone
10 - Search for a patron that does exist
11 - Check there is no error in console
12 - Check that autocompletion works
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes minor changes to the text of hold confirmation buttons
in the checkin process in order to make them more consistent.
Also changed: Removed the "danger" class from the "Ignore" button for
readability and consistency's sake.
To test, apply the patch and check in an item which is on hold for a
patron at your logged-in library. The hold confirmation dialog's buttons
should read "Confirm hold," "Print slip and confirm," and "Ignore."
Confirm the hold, then check in the same item again.
In the dialog, the buttons should read "Confirm hold," "Print slip and
confirm," and "Cancel hold."
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
branchcode is no longer retrieved from the SQL query, we should use the
Koha::Patron object instead.
Test plan:
Create some overdues and list them on Home › Circulation › Overdues
=> With this patch applied you should see that the "Library" column is
correctly filled with the patron's library name
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
What we were doing was wrong and is still wrong. The output_pref should not be done
in modules or script, only template side.
Much more work would be needed to clean the situation. This patch provides less changes
as possible to, hopefully, not introduce side-effects.
To recreate:
1 - Enable decreaseLoanHighHolds, set to 1 day and more than 0 holds
2 - Set TimeFormat to 12 hour
3 - Find or create a record with two items
4 - Place a hold on one of them
5 - Checkout the other to a different patron
6 - Note the warning message display correct time
7 - Confirm the checkout
8 - Note the item is due at 11:59AM
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Generated with:
perl -p -i -e 's/\|\s?\$Price\s?\|\s?html\s%]/| \$Price %]/g' **/*.tt **/*.inc
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Cleaned up whitespace issues tab vs. space in template.
After applying all patches:
git diff -w origin/master
For the koha-tmpl/intranet-tmpl/prog/en/modules/circ/returns.tt
only the changed type="text" lines will show, but without the
-w, there will be more whitespace changes.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
