Similar to the full path test in sub themelanguage, this patch makes a
change in _get_template_file. This allows you to pass a template
outside the modules directory to get_template_and_user. (Note: the sub
badtemplatecheck already blocks bad paths.)
Especially, this would be helpful for plugins using templates. As can be
seen in Templates.pm, a change was made earlier to overwrite the filename
for a plugin in sub gettemplate. This exception can now be removed.
Also note the small change in Koha/Plugin/Base.pm; mbf_path is already
absolute and if we pass a full path, we do not need it. This allows use of
a regular Koha template or a shared template between plugins (as long as
badtemplatecheck allows the path).
What are the side-effects of this change?
[1] We should not pass absolute paths if we mean relative ones.
A follow-up patch deals with one occurrence in the codebase.
No regressions for regular use.
[2] Plugins can call get_template_and_user directly or go via get_template
in Koha/Plugin/Base (absolute paths don't go via mbf_path).
Note: replaced two single quotes in Auth.pm to show template name in test
description.
Test plan:
[1] Open some page on OPAC or staff client to trigger a template.
[2] Run t/db_dependent/Auth.t to verify not allowing some bad templates.
[3] Run t/db_dependent/Templates.t to verify an absolute path.
[4] Run t/db_dependent/Plugins.t to verify using templates in a plugin.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test t/db_dependent/Auth.t seems to have an ineffective test data cleanup.
Data generated by TestBuilder is left in borrowers, branches, categories,
sms_providers and sessions tables after the test.
To replicate:
1. Check the row count of borrowers, branches and categories tables
2. prove t/db_dependent/Auth.t
3. Repeat step 1
4. Observe borrowers the following tables have increased in row count:
- borrowers
- branches
- categories
- sessions
- sms_providers
To test:
1. Before applying the patch, go through steps at "To replicate" plan
2. Apply patch
3. Go through steps at "To replicate" plan
4. Observe step 4 no longer applies and those tables have the same number of
rows as before executing the test.
This issue has been happening in REST tests as well, and this solution is
directly copy-pasted from t/db_dependent/api/v1/cities.t
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch moves the code from C4::Members::changepassword to
Koha::Patron->update_password
Test plan:
Change your password at the OPAC and the staff interface
This should work as before
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
I rebased this on top of 16849 because they were conflicting.
Tests pass, code looks good (as usual) and I checked both OPAC
and staff password change work as expected.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 14507 introduced the use of checkpw in C4::SIP::ILS::Patron so that
non-Koha internal authentication processes would be able to function via
SIP ( LDAP et al ).
The problem is that checkpw changes the userenv to that of the patron!
This is not usually an issue in Koha because most of the time that
patron running through checkpw is the one to be logged in.
Aside from SIP2 the only other area where this may be an issue is in SCO
when using SelfCheckoutByLogin.
Test Plan:
1) On master, check out an item to a patron via SIP2
2) Note the checkout lists the item as having been checked out
from the patron's home library not matter which library is was
supposed to be checked out from.
3) Apply this patch
4) Re-checkout the item
5) The item should now be checked out as if it was checked out from
the library as defined in the SIP configuration file.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 7976 has removed this permission, but other patches re-added it...
Note that the occurrences in sendbasket.pl, edithelp.pl, opac/svc/login should
have been removed by bug 7976.
Test plan:
git grep 'borrow.*=> 1'
should not return any results.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
Unless in t/db_dependent/Context.t where we want to test the cache
behaviors.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch fixes the t/db_dependent/Auth.t so they don't look for the removed
file and use the new one instead.
To test:
- On master, run
$ prove t/db_dependent/Auth.t
=> FAIL: You get something similar to this:
- Apply the patch
- Re-run the tests
=> SUCCESS: Tests now pass.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
First, it is strongly recommended to set the OPACBaseURL. But
this patch allows the inclusion of the protocol and not just
a site.
Next, C4/Auth now puts OPACBaseURL into the template parameters
regardless of OPAC or Staff clients. t/db_dependent/Auth.t was
tweaked to add a check for confirming that get_template_and_user
adds OPACBaseURL to both OPAC and Staff templates.
In the staff client, once the OPACBaseURL is set, you get a nice
OPAC View link when viewing a biblio's detail. It should reflect
the protocol used now.
Hard coded 'http://' strings were removed from the
sample_notices.sql files. This is what required also updating
the letters table in the updatedatabase.pl script.
The explanation text in the sysprefs.sql needed updating too to
reflect the inclusion of the protocol. And this was the other
update done in the updatedatabase.pl script. The opac.pref file
was similarly changed as well.
catalogue/detail.pl had no need to pass a custom OpacUrl value,
since C4/Auth passes the required OPACBaseURL, so it and the
corresponding template were modified.
Both the MARC21 and NORMARC intranet details files had 'http://'
hard coded in them. This was removed.
Both the bootstrap and prog theme opac-detail template had a
protocol parameter that was used. The logic for the parameter
was not removed, because it is used extensively in one template.
Perhaps it should be used to simplify the other. However, the
calculated current_url parameter had references to the protocol
removed, because of the changes to OPACBaseURL.
opac/opac-shareshelf.pl had a hard coded 'http://' which was
removed.
t/db_dependent/Auth_with_cas.t had 'http://' added to the value
set for OPACBaseURL.
In virtualshelves/sendshelf.pl explicit code which sent the
OPACBaseURL preference was removed, since C4/Auth sends it all
the time now.
C4::Context::set_preference was tweaked to ensure that
OPACBaseURL would always start with http.
t/db_dependent/Context.t was tweaked to specifically test this.
The Shibboleth authentication needs OPACBaseURL set, and that
it be https protocol. The _get_uri routine was tweaked to always
pass back https:// as the protocol on the OPACBaseURL.
t/Auth_with_shibboleth.t was tweaked to specifically test the
changes.
TEST PLAN
---------
This is not an easy patch to test. Difficulties include:
- configuring Koha to run under https
(tweaking apache2 isn't so hard, just tricky)
- configuring Koha to run OPAC and Staff with Plak
(since code with comments about plak were sliced out)
- configuring Koha to use CAS
(may be requires for the CAS test)
1) Apply patch
2) Make sure OPACBaseURL is set without the protocol included.
UPDATEDATABASE
3) back up your DB
4) ./installer/data/mysql/updatedatabase.pl
-- It should run without errors.
5) Look up the OPACBaseURL system preference in the staff
client
-- It should have http:// prepended.
6) Run the mysqlclient from your koha git directory
USE koha_library;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- There should be no prepended http:// on the
<<OPACBaseURL>>.
7) restore your DB
8) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
AUTH
9) Call up staff client.
10) Call up OPAC.
-- C4/Auth.pm doesn't barf.
11) Call up Plack staff client
12) Call up Plack OPAC.
-- C4/Auth.pm doesn't barf.
13) prove -v t/db_dependent/Auth.t
CONTEXT
14) Home -> Koha administration -> Global System Preferences
-> OPAC
15) Modify and save OPACBaseURL to not have http:// or https://
on it.
-- It should be modified to include http://
16) Modify and save another system preference.
-- It should save normally
17) prove -v t/db_dependent/Context.t
CATALOGUE/DETAIL (tt & pl)
18) Confirm the OPACBaseURL is set
19) Navigate to any biblio details in the staff client
-- There should be a "OPAC view" link which has the
correct http:// or https:// in it.
SQL (sample notices and sysprefs)
20) Run the mysqlclient from your koha git directory
USE koha_library;
DELETE FROM letter;
source installer/data/mysql/de-DE/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/en/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/nb-NO/1-Obligatorisk/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/es-ES/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/fr-FR/1-Obligatoire/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/it-IT/necessari/notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/pl-PL/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/ru-RU/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/uk-UA/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- Each of the selects should should lines that have
<<OPACBaseURL>> starting them, but no hard-coded http://
DELETE FROM systempreferences;
source installer/data/mysql/sysprefs.sql;
SELECT * FROM systempreferences WHERE variable='OPACBaseURL';
-- The explanation should reflect the new explanation.
QUIT
21) restore your DB
22) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
SLIM2INTRANETDETAIL
23) Set 'XSLTDetailsDisplay' system preference to default.
24) Set 'marcflavour' system preference to MARC21.
25) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
26) Set 'marcflavour' system preference to NORMARC.
27) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
OPAC-DETAIL
28) Set 'opacthemes' to bootstrap.
29) Set 'SocialNetworks' to enabled.
30) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
31) Set 'opacthemes' to prog.
32) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
AUTH_WITH_CAS
33) prove -v t/db_dependent/Auth_with_cas.t
OPAC-SHARESHELF
34) Set 'OpacAllowSharingPrivateLists' to allow.
35) In OPAC, 'Save to Lists' a search result.
36) Save it to a new private list.
37) Click the Lists button, and select the new list.
38) Click the Share button.
AUTH_WITH_SHIBBOLETH
39) prove -v t/Auth_with_shibboleth.t
-- needs to be tests on Debian, because I can't get
the Test::DBIx::Class installed in Ubuntu. :(
Rebased again on kohadevbox...
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The move avoids a problem where many modules would gain
a dependency on C4::Auth just because C4::Members needs access
to hash_password().
This patch also adds a couple unit tests for the new password
hashing code.
To test:
[1] Verify that there are no regressions on the test plan for bug
9611.
[2] Verify that t/AuthUtils.t and t/db_dependent/Auth.t pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen found a case where the cookies array was not built flat. I add a
unit test for that (check the cookie array is flat) and also test the
cookies output of get_template_and_user so we are sure the &language=
parameter is correctly handled.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
- Tests in t/db_dependent/Auth.t pass
- Tested in intranet, OPAC logged in, OPAC logged out
* Adding a valid language code to the URL switches the language
as expected
* Adding an invalid language code causes no change
Nice feature!
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This moves the DB-requiring tests out of the way, with the exception of
00-load.t which is used by the git hooks. For it, it makes it skip
loading problematic modules. This allows 'make test' to complete successfully
without a database configured, wich is a required part of making packages.
This has been tested against the v3.02.03 tag and the master branch.
Signed-off-by: Chris Nighswonger <chris.nighswonger@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Moved test cases that depend on the DBMS and having
an initialized Koha database to a subdirectory
of t so that they will not be swept up into
the default 'make test'. Goal is to have
these DB-dependent tests runnable either via
a special make target or perhaps from the
web installer.
Signed-off-by: Chris Cormack <crc@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
