To test:
1 - place a hold for a patron
2 - Get SIP running
https://wiki.koha-community.org/wiki/Koha_SIP2_server_setup
3 - edit the sip_cli_emulator.pl for hold_mode from '+' to '-'
4 - Attempt to cancel hold
5 - It fails
6 - Apply patch
7 - Try again
8 - It succeeds
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The system preference AllowItemsOnHoldCheckout only affects SIP based checkouts. I believe we should rename it AllowItemsOnHoldCheckoutSIP so it matches AllowItemsOnHoldCheckoutSCO. We should also update the description as well.
As far as I know AllowItemsOnHoldCheckout has never affected anything except SIP traffic. That does not preclude the addition of another AllowItemsOnHoldCheckout syspref that would affect the staff interface, but that would be an enhancement and is outside the scope of this bug report.
Test Plan:
1) Test AllowItemsOnHoldCheckout via SIP
2) Apply this patch
3) Test AllowItemsOnHoldCheckoutSIP via SIP
4) Note there is no difference!
5) Note the syspref description has been update to mention SIP
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
borrowernumber is not an accessor for C4::SIP::ILS::Patron, access is
via hashref
Add ability to specify the pickup location using a command line
parameter
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: frederik chenier <frederik.chenier@inlibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Comment needs to be corrected, and now applies to the whole code
paragraph following it.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the ability to set an unlimited number of guarantors
for a given patron. As before, each guarantor may be linked to another
Koha patron, and all the behavior that applies to a given guarantor
remains the same.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Find some patrons with guarantors, verify the still have their guarantor
4) Test adding and removing guarantors on a patron record, both Koha users and not
5) Verify the "Add child" button works
6) Verify NoIssuesChargeGuarantees still works
7) Verify tools/cleanborrowers.pl will not delete a guarantor
8) Verify the guarantors are displayed on moremember.pl
9) Verify the guarantor is removed by members/update-child.pl
10) Verify the guarantor is removed by misc/cronjobs/j2a.pl
11) Verify import patrons converts guarantor_id, relationship, contactfirstname,
and contactsurname into a guarantor
12) prove t/Patron.t
13) prove t/db_dependent/Circulation.t
14) prove t/db_dependent/Circulation/NoIssuesChargeGuarantees.t
15) prove t/db_dependent/Items.t
16) prove t/db_dependent/Koha/Patrons.t
17) prove t/db_dependent/Members.t
18) prove t/db_dependent/Patron/Relationships.t
Signed-off-by: Kim Peine <kmpeine@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The SIP2 interface has long used a set of accounttypes to denote payment
types. Now we have an authorised list of payment_types and a
payment_type field in accountlines this patch alters the logic to use
it.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Matha Fuerst <mfuerst@hmcpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Matha Fuerst <mfuerst@hmcpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch fixes a bug from Bug 15221 and hopefully also makes it so that the alert flag
is suppressed when checked_in_ok is set and an item is not checked out.
To test:
0) Create patron in web interface with a cardnumber and userid of "staff" with a password
that matches the account in SIPconfig.xml. Also set their branch to CPL
(also matching SIPconfig.xml).
1) Create an item with a barcode of 'test'
2) Choose a patron to check out to and record their borrowernumber
In one terminal:
3) cd to your git directory (e.g. /home/koha/koha)
4) perl ./C4/SIP/SIPServer.pm ~/koha-dev/etc/SIPconfig.xml
In another terminal:
5) cd to your git directory (e.g. /home/koha/koha)
6) perl ./misc/sip_cli_emulator.pl -l CPL -su staff -sp <password> --port=6001 --address=localhost --item test -m checkin --patron <borrowernumber>
NOTE: You need to replace <borrowernumber> with the borrowernumber from Step 2, and <password> with the password from Step 0.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Matha Fuerst <mfuerst@hmcpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Some libraries would like to limit the amount of personal information a SIP server sends
to arbitrary parties on a per-login basis.
Test Plan:
1) Add a new key/value pair to one of your existing login stanzas in your SIP config file
For example: hide_fields="BD,BE,BF,PB"
2) Restart SIP
3) Send a SIP message that would normally return those fields ( in this example, a Patron Information Request )
4) Note the response has had those fields removed
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Christopher Davis <tubaclarinet@protonmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If CheckPrevCheckout is set to Do, then checkouts are blocked at the SIPServer
To test:
- Do not apply this patch
- Set CheckPrevCheckout to "Do", or "Unless overridden, do"
Verify the SIP server is blocking checkouts with this setting set
- Apply this patch
- Note that the checkout is now allowed, with a screen message telling
the borrower they've issued the item before.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The CM field was all set up for implementation, but never completed.
We should fully implement the CM ( Hold Pickup Date ), which according
to the SIP2 protocol specification is "The date that the hold expires".
Test Plan:
1) Set up a waiting hold for an item
2) Using the sip cli emulator, send an item information request for that item
3) Note the CM field does not show up
4) Apply this patch
5) Restart all the things!
6) Repeat the item information request
7) Note the CM field is now transmitted!
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Now that we have Koha::Logger, we should use it in our SIP server. This
has the potential to make debugging SIP issue much easier. We should add
the userid for the sipuser to the namespace so we can allow for separate
files per sip user if wanted.
Also modifies the log4perl.conf to lazy-open filehandles to log files,
so the same config can be used with log-files needing different
permissions.
Test Plan:
1) Apply this patch set
2) Update the modififed log4perl.conf to your system
3) Restart your sip server
4) Tail your sip2.log, run some queries
5) Note you still get the same output messages as before, with the
addition of the ip address and username ( if available )
prefixing the message.
Based on original patches by Kyle Hall and additions by Olli-Antti
Kivilahti.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds the 'interface' field to the accountlines table and
updates all Koha::Object routines and calls to use it.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
If an item that is withdrawn is checked in via SIP2, Koha does not process the checkin, but still indicates the checkin succeeded via the ok flag in the checkin response message.
To recreate:
1 - Mark an item withdrawn
2 - Set up sip server:
https://wiki.koha-community.org/wiki/Koha_SIP2_server_setup
3 - Set 'BlockReturnOfWithdrawnItems' to block
4 - Use the sip_cli_emulator to checkin the withdrawn item
5 - There is no error in the checkin
Test Plan:
1) Mark an item withdrawn
2) Set BlockReturnOfWithdrawnItems to block
3) Use the sip cli emulator to checkin the withdrawn item
4) Note the response begins with 101
5) Apply this patch
6) Restart all the things ( including SIP server )
7) Repeat checkin with sip cli emulator
8) Note the checkin now beings with 100
Signed-off-by: Geeta Halley <ghalley@roundrocktexas.gov>
Rescued-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Branch transfer limits are respected for placing holds in the OPAC but nowhere else. This should be remedied.
Test Plan:
1) Set up a branch transfer limit from Library A to Library B
2) Verify you cannot set up a hold for an item from Library A for pickup at Library B from the staff interface ( without overriding )
3) Verify you cannot place that hold via ILS-DI
4) Verify you cannot place that hold via SIP
4) Verify a forced hold from Library A to Library B will not show up in the holds queue
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
If a checkin has any messages at all, even informational like LocalUse, the alert flag ( 4th character of the response ) will be set to Y, even if we do not prove a corresponding alert code in the CV field. We should only set the alert flag if we are going to send a value in the CV field.If a checkin has any messages at all, even informational like LocalUse, the alert flag ( 4th character of the response ) will be set to Y, even if we do not prove a corresponding alert code in the CV field. We should only set the alert flag if we are going to send a value in the CV field.
Test Plan:
1) Set the checked_in_ok sip account flag to 1 for an account
2) Check in an already checked in item via SIP
3) Note the alert flag is set to Y
4) Apply this patch
5) Restart SIP
6) Check the item in again
7) Note the alert flag is set to N
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jill Kleven <jill.kleven@pueblolibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Only use of $pending was removed in the former patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
AddIssue already checks for holds in the item being issued and deals with them
The sip code, additionally, does not consider that multiple holds per bib
is allowed
To test:
0 - Apply only first patch (unit tests)
1 - Place two holds for a patron on a bib
2 - Checkout that item via sip_cli_emulator
3 - Note all holds are cancelled/filled
4 - prove -v t/db_dependent/SIP/Transaction.t
5 - it fails
6 - Apply second patch
7 - prove tests, all green
8 - Place two holds on a single bib for one patron again
9 - Checkout the item via sip_cli_emulator
10 - Only one holds is filled
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Define a rule to deny renewal
2 - Checkout an item meeting this rule
3 - Attempt renew an item via the OPAC
4 - Attempt renewal via SIP
5 - Attempt renewal via staff client
6 - Verify errors are reasonable
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
and avoid unecessary processing
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Tested and found correct AU data is returned, and passes QA test tool
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Misspelled variable causes _get_outstanding_holds to crash
if patron is queued on biblio level
Caused by
commit 62a075987a
Bug 21184: Replace C4::Items::GetBarcodeFromItemnumber calls
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Those calls to C4::Items::GetItemnumbersForBiblio can be replaced with
my @itemnumbers = Koha::Items->search({ biblionumber => $biblionumber})->get_column("itemnumber")
Test plan:
- Use the GetAvailability service of ILS-DI
- Try to place a hold on an item that is available and another one
- Use the batch record deletion tool to remove record with and without items.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Set up your SIP: https://wiki.koha-community.org/wiki/Koha_SIP2_server_setup
2) Run:
misc/sip_cli_emulator.pl -a localhost -p 6001 -su <login> -sp <passsword> -l <library_code> --patron <borrowernumber> -s "Y " -m patron_information
the -s parameter says what kind of additional information you want to see
3) Check the response: if the requested patron has waiting hold, there
is field "AS" with the barcode of waiting item
The right response looks like this:
64 00120180817
052434000100000000000000000000AOCPL|AA1|AEKoha Admin|BLY|CC5|AS39999000004410|PCS|PIY|AFGreetings from Koha. |
More reading ;)
http://multimedia.3m.com/mws/media/355361O/sip2-protocol.pdf
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Those calls to C4::Items::GetBarcodeFromItemnumber can be replaced with
my $barcode = Koha::Items->find($itemnumber)->barcode;
But if we are not sure that the item exists, we should test the return
of ->find before ->barcode
Test plan:
- Edit an item
- Check an item in
- Test SIP - I do not really know how to trigger that code, apparently
misc/sip_cli_emulator.pl does not deal with holds. Any ideas?
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Caused by
commit 546379cc92
Bug 17680: C4::Circulation - Remove GetItemIssue, simple calls
Since this commit AddReturn return a Koha::Issue object, not a hashref
with item's info.
Test plan:
1 - Enable SIP server on your test instance
For kohadevbox:
cp /etc/koha/SIPConfig.xml /etc/koha/sites/kohadev/
create patron with user/pass term1/term1 and grant circulation
privileges
2 - enable AutomaticItemReturn
3 - Checkin an item which will generate a transfer via SIP2:
perl /home/vagrant/kohaclone/misc/sip_cli_emulator.pl -a localhost -p
6001 -su term1 -sp term1 -l LPL --item {BARCODE} -m checkin -t
CR
4 - Note no CT field
5 - Apply patch
6 - Repeate checkin via SIP2
7 - Transfer destination is correctly returned in CT
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
No need to check the pref.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Many services use SIP patron req info to validate a patron against
the koha database. If recording lastseen sites will
also want to record that the user has accessed these
library facilities although they have not logged into koha
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified that Patron Info request (63) updates lastseen when the pref has
been enabled.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sounds like we do not need related fields or 'overdue' flag here.
No idea how to confirm there is no regression here.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@deichman.no>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Here we are, patronflags is used in a couple of places where (almost) all flags
were really useful: C4::SIP::ILS::Patron->new and circulation.pl
This patch only deal with the circulation code as I am not convident
enough with SIP code.
The change does not seems trivial because of the complexity of the
existing code, but the logic is the same. We send a variable to the
template depending on the situation of the patron.
I guess only code eyes ball could catch issue in this patch quickly.
Maybe we need to find a good place in a Koha module to move this code
and provide code coverage (especially when C4::SIP::ILS::Patron will
reuse it).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some libraries need to be able to send additional patron data from the
extended patron attributes in made up SIP2 fields for the patron
information and patron status responses.
Test Plan:
1) Apply this patch
2) Create 3 new patron attributes with the codes CODE1, CODE2, CODE3.
Make a least one repeatable.
3) Create a patron, add those attibutes for the patron, make sure there
are at least two instances of the repeatable code
4) Edit your SIP2 config file, add the following within the login stanza:
<patron_attribute field="XX" code="CODE1" />
<patron_attribute field="XY" code="CODE2" />
<patron_attribute field="XZ" code="CODE3" />
5) Using the sip cli emulator, run patron_information and
patron_status_request messages for the patron
6) Note the values you set for the patron attributes are sent in the
corrosponding fields!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Daniel Mauchley <dmauchley@duchesne.utah.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: added parentheses on line 488 when assigning hashref to array.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Replaces "or" with "||" in variable assignment
second attempt to retrieve borrower was not being executed due
to changed precedence
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The GetMemberAccountRecords may be a perf killer, it retrieves all the
account lines of a patron and then the related item and biblio
information.
Most of the time we only want to know how much the patron owns to the
library (sum of amountoutstanding). We already have this information in
Koha::Patron->account->balance.
This patch replaces the occurrences of this subroutine by fetching only
the information we need, either the balance, the detail, or both.
It removes the formatting done in the module, to use the TT plugin
'Price' instead.
There is a very weird and error-prone behavior/feature in
GetMemberAccountBalance (FIXME): as the accountlines.accounttype is a
varchar(5), the value of the authorised value used for the
ManInvInNoissuesCharge pref (category MANUAL_INV) is truncated to the 5
first characters. That could lead to unexpected behaviors.
On the way, this patchset also replace the GetMemberAccountBalance
subroutine, which returns the balance, the non issues charges and the
other charges. We only need to have the balance and the non issues
charges to calcul the third one.
Test plan:
Add several fees for a patron and play with HoldsInNoissuesCharge,
RentalsInNoissuesCharge and ManInvInNoissuesCharge.
The information (biblio and item info, as well as the account line) must
be correctly displayed on the different screens: 'Fines' module, fine
slips, circulation module
Note that this patchset could introduce regression on price formatting,
but will be easy to fix using the TT plugin.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Feature using it is completely undocumented as far as my research has
shown.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Benjamin Rokseth <bensinober@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended $item->biblio by $biblio.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some SIP services ( such as Comprise ) require that an attempt at
over-paying a patron's account via SIP2 should fail, rather than create
a credit on the account. We should make this a configurable option on a
per-login basis in the SIP2 config file.
Test Plan:
1) Apply this patch
2) Enable the new parameter
disallow_overpayment="1"
for the login to be used in this test.
3) Restart your SIP server
4) Create or find a patron with fines
5) Attempt to send a payment via SIP for more than what the
patron's balance is
6) Note the response indicates a payment failure
7) Attempt to send a payment via SIP for the account balance or
less
8) Note the response indicates the payment has succeeded
9) Verify in Koha that the payment was processed
Signed-off-by: Rhonda Kuiper <kuiper@roundrocktexas.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new Koha::Hold->cancel method and replaces the calls
to C4::Reserves::CancelReserve with it.
Test plan:
- Add and cancel holds
- Change priority of holds
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
