This patch adds a new page opac-reset-password where a user cna enter their login
(userid or carndumber), current password, and new password.
If the user has a password expiration date and the current password is correct and
the new passwords match and meet requirements their password will be updated and the
expiration date reset
A patron whose password does not expire will be reidrected to login to change their password
To test:
1 - Apply patch, updatedatabase, enable new syspref EnableExpiredPasswordReset
2 - Set 'Password expiration' for a patron category
Home->Administration->Patron categories->Edit
3 - Create a new patron in this category with a userid/password set, and an email
4 - Update the patron with an expiration to be expired
UPDATE borrowers SET password_expiration='2022-01-01' WHERE borrowernumber=51;
5 - Give the borrower catalogue permission
6 - Attempt to log in to Straff interface
7 - Confirm you are signed out and notified that password must be reset
8 - Click 'Reset your password' link
9 - You should see the reset password page with fields for: login, current password, new password, conmfirm password
10 - enter invalid/incomplete credentials
11 - Confirm you are notified of invlaid credentials
12 - Fill in all fields, but enter current password as new password
13 - Confirm you are notified of no change
14 - Set minimum password length / strong password requirement for category
15 - Confirm you receive error if new password too short or not secure
16 - Enter a valid new password and submit and confirm update is successful
17 - Confirm you have buttons to go to OPAC or Staff and that both work
18 - Confirm you cna log in (i.e. expiration has been reset)
19 - Expire the users password
20 - Remove catalogue permission
21 - Reset password again and confirm only OPAC link
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the three scripts that fetched the soonest renewal date
to use the return from CanBookBeRenewed
To test:
1 - Set a circulation rule with a 'no renewal before' set to 3, loan length set to 5
2 - Check out an item to a patron that uses this rule
3 - Verify the checkouts for the patron show the correct 'No renewal before' date
4 - Sign in to the patron's opac account
5 - Verify the item shows it cannot be renewed, and shows the correct date
6 - Go to Circulation->Renew
7 - Attempt to renew using barcode
8 - Confirm error shows the soonest renewal date
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We got
Can't call method "value" on unblessed reference at /kohadevbox/koha/opac/opac-messaging.pl line 86
$cookie can be an arrayref, we should retrieve the session id using
CGI->cookie('CGISESSID')
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch replaces the AutoEmailOpacUser system preference with a new
AutoEmailNewUser preference. This makes the functionof the preference
clearer.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates all references to the former ACCTDETAILS notice to
use the new WELCOME email notice instead.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The error pages wrote a HTTP status code of 200 for all PSGI requests, even
though it should have only done it for PSGI requests from the ErrorDocument
middleware. This patch fixes that.
0) Do not apply patch
1) Open F12 dev tools and go to Network tab
2) Go to http://localhost:8081/files/blah
3) Note that the webpage is a 404 error but HTTP status code is 200
4) Go to http://localhost:8081/cgi-bin/koha/circ/blah
5) Note that the webpage is a 404 error and HTTP status code is 404
6) Apply patch
7) Go to http://localhost:8081/files/blah
8) Note that the webpage is a 404 error and HTTP status code is 404
9) Go to http://localhost:8081/cgi-bin/koha/circ/blah
10) Note that the webpage is a 404 error and HTTP status code is 404
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch modifies the way Koha sets cookies so that the "sameSite"
attribute is explicitly set to "Lax." This option is chosen because it
is the value which is currently assumed by browsers when the sameSite
attribute is not set.
To test, apply the patch and restart services.
- Log in to the staff interface and open your browser's developer tools.
- In Firefox, look for a "Storage" tab.
- In Chrome, look for an "Application" tab.
- Under "Cookies," click the URL of the staff interface.
- You should see all the cookies which are set for that domain.
- The CGISESSID cookie should have sameSite set to "Lax."
- Go to Cataloging -> New record.
- Check the "marcdocs" and "marctags" cookies.
- Switch to the Advanced MARC editor (you may need to enable
theEnableAdvancedCatalogingEditor preference).
- Check the "catalogue_editor" cookie.
- Add a new item to an existing bibliographic record.
- Check the "LastCreatedItem" cookie which is set after you save the
new item.
- Go to Authorities -> Authority search.
- In authority search results, click "Merge" from the "Actions" menu
next to one of the results..
- Check the "auth_to_merge" cookie.
- Go to Administration -> MARC bibliographic framework
- Choose "MARC structure" from the menu corresponding to one of the
frameworks.
- Check the "Display only used tags/subfields" checkbox.
- Check the "marctagstructure_selectdisplay" cookie.
- Go to Circulation -> Check out to a patron with checkouts.
- Check the "Always show checkouts immediately" checkbox.
- Check the "issues-table-load-immediately-circulation" cookie.
- Go to Tools -> Patron clubs. You will need at least one active club
with one or more patrons enrolled.
- From the list of clubs, click Actions -> Search to hold.
- Check the "holdforclub" cookie.
- Go to Tools -> Batch item modification and submit a batch of items.
- Uncheck one or more checkboxes in the "Show/hide columns" area.
- Check the "showColumns" cookie.
- View a patron -> Search to hold.
- Check the 'holdfor' cookie.
- With WebBasedSelfCheck enabled, log in to the self-checkout page.
- Check the "JWT" cookie.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If a staff member has access to the staff client (either because
'catalogue' permission is enabled or they're a superlibrarian
then that user can add items (from OPAC or staff client) to a list
marked 'Staff only'
Test plan:
1. In the staff client go to: Lists > 'New list'. Notice under 'Allow changes to contents
from' there are three options: Nobody, Owner only, Anyone seeing this
list
2. Apply first 3 patches and run updatedatabase.pl
cd installer/data/mysql
sudo koha-shell <instance>
./updatedatabase.pl
3. Restart memcached and plack
4. Create 4 patron accounts:
- User A : Superlibrarian permissions
- User B : 'Staff access, allows viewing of catalogue in staff interface
(catalogue)'
- User C : No permissions
- User D : 'Staff access, allows viewing of catalogue in staff
interface' and 'Lists' > Edit public lists (edit_public_lists)' sub-permission
5. Login to staff client as User A.
Create a public list and select the new 'Staff only' option under 'Allow changes to contents from'
6. Log into the staff client as User B.
Confirm you can add items to the list from the following staff client pages:
- Individual list page using the 'Add items' button
- Staff client search result page
- Staff client biblio detail page
7. Confirm you can remove items from the list
8. Confirm you can perform an OPAC search when not logged in
9. Log into the OPAC as User B. Confirm you can add items to the list
from the following OPAC pages:
- OPAC search result page
- OPAC biblio detail page
10. Log into the OPAC as User C. Do an OPAC search and confirm you
can view the list, but not add items to it
11. Login to the staff client as User B. Create a new list with the
following settings:
- 'Category'='Private',
- 'Allow changes to contents from'='Staff only'
Notice a red hint message is displayed.
Change 'Category'='Public' and notice the hint is removed
12. Log into the OPAC as User C. Notice the 'Staff only' option is not
available when creating a list
13. Log into the OPAC as User B. Repeat step 11. Confirm the same
outcome
14. Log into the staff client as User A. Create a list with the
following settings:
- Public = 'Public'
- Allow changes to contents from = 'owner only'
15. Log into the staff client as User D. Edit the list from step 14
confirm you can edit the list to have 'Allow changes to contents from' =
'Staff only'
16. Run Patron.t and Virtualshelves.t unit tests:
sudo koha-shell <instance>
prove t/db_dependent/Koha/Patron.t
prove t/db_dependent/Virtualshelves.t
Sponsored-by: Horowhenua District Council, New Zealand
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a new system preference, OpacAdvancedSearchTypes, as an
OPAC-specific version of the AdvancedSearchTypes preference. Values from
AdvancedSearchTypes are copied to OpacAdvancedSearchTypes so that
behavior is consistent.
The patch also alters the output of the "Most popular" page so that:
1. The page heading is correct ("Most popular titles" instead of "Top
issues").
2. The table show both item type and collection whether or not the user
has submitted query with one of those fields as a filter.
To test, apply the patch and run the database update process.
- Go to Administration -> System preferences.
- Search for AdvancedSearchTypes. You should get two results, one for
the OPAC preference and one for the staff interface.
- Check that the OpacAdvancedSearchTypes settings match the
AdvancedSearchTypes settings.
- View the advanced search pages in the staff interface and OPAC to
confirm that the tabs look correct.
- Change the OpacAdvancedSearchTypes and AdvancedSearchTypes settings to
be different and confirm that each is applied separately to each
interface.
- Enable the OpacTopissue system preference.
- View the "Most popular" page in the OPAC.
- The page heading should be correct.
- The OpacAdvancedSearchTypes settings should be reflected in the
"Refine your search" sidebar: If "Collection" is checked, a filter
for collection should appear. If "Item types" is checked, a filter
for item types should appear.
- The output of your search should include collection and item type
regardless of what filters you've submitted.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Some discovery tools can't translate ISL-DI results, it would be useful
if we can get ISL-DI output already translate.
This patch add an optional parameter language to GetAvailability, and
make GetAvailability results translatable.
If no parameter is given the output language is the language of the
cookies is present or the first language in the opac language list.
Test plan:
1. Enable the ILS-DI system preference
2. Locate a record
3. Test these URLs:
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[BIBLIONUMBER]&id_type=biblio
and
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[ITEMNUMBER]&id_type=item
(Where the [OPACBASEURL] is the OPAC URL of your test instance,
[BIBLIONUMBER] and [ITEMNUMBER] are a record number and item number of
your choice.)
4. Apply the patch
5. Test these URLs:
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[BIBLIONUMBER]&id_type=biblio&language=[LANGUAGE]
and
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[ITEMNUMBER]&id_type=item&language=[LANGUAGE]
(Where the [OPACBASEURL] is the OPAC URL of your test instance,
[BIBLIONUMBER] and [ITEMNUMBER] are a record number and item number of
your choice, [LANGUAGE] is a language code ex: 'en' or 'fr-FR')
6. The results should now be in the requested langugage
Sponsored-by: University Lyon 3
Signed-off-by: Sonia <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
There are 2 prefs that control the default view of biblio detail pages:
IntranetBiblioDefaultView for staff and BiblioDefaultView for OPAC.
There are as well viewISBD, viewLabeledMARC and viewMARC to allow/don't
allow access to those page for staff members.
This code need to be in a single place to avoid discrepancy.
Test plan:
Play with BiblioDefaultView and IntranetBiblioDefaultView and confirm
that the links of biblio point to the correct view.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The self registration form stores a new borrower as a borrower modification when verifying by email.
Borrower modifications can handle extended attributes.
This patch simply sotres the extended attributes in the modifications table, and approves a modification
to the extended attributes only after patron is created
To test:
1 - Apply patch
2 - Create a patron attribute and set it as viewable/editable in the OPAC
3 - Set system preference PatronSelfRegistrationVerifyByEmail
4 - Reigster a new patron on the OPAC, provide an email and populate the extended attribute
5 - Retrieve the verification token, the last on in the messages table
SELECT * FROM message_queue;
6 - Go tot he url from above
7 - Confirm successful patron creation
8 - View patron record and confirm attribute was set
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This alters the svc scripts to set the report id after fetchign the report object
to ensure it is passed to exectue query
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The last run of a report is updated only if method execute_query() is
called with report_id.
This whas missing for :
- when report is run publicly
- when report is sent by email
- when report is exported
Patch changes the method signature to use a hash of params, in order to
easily avoid some params.
Test plan :
1) Create a report.
2) Run report.
3) Check the report listing. Confirm that the last run info on the report is updated.
4) Make report public.
5) Run report via public url.
6) Check the report listing. Confirm that the last run info on the report IS NOT updated.
7) Schedule the report to run at a given time and e-mailed to an address.
8) After the report runs at the scheduled time, check the report listing. Confirm that the last run info on the report IS NOT updated.
9) Run report.
10) Export results.
11) Check the report listing. Confirm that the last run info on the report IS NOT updated AT THE TIME OF THE EXPORT.
Questionable (I don't know if this is addressed):
12) Run report on backend through a cron job and send results via e-mail.
13) Check the report listing. Confirm that the last run info on the report IS NOT updated.
14) Apply patch.
15) Rerun steps 2-13. Confirm that steps 3, 6, 8, 11, and 13 DO UPDATE the last run info.
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Trivial fix.
Test plan:
Delete two lines from opac search history.
Verify results. Check plack-opac-error.log.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This is a follow-up patch for bug 29543. If an invalid cardnumber has
been used we should not generate a token.
Test Plan:
1. Set SelfCheckoutByLogin to 'cardnumber'.
2. Go to http://localhost:8080/cgi-bin/koha/sco/sco-main.pl
3. Enter an invalid carnumber like 'thisisabadcardnumber'
4. See the appropriate message "Sorry The userid thisisabadcardnumber was not found in the database. Please try again."
5. Try again with a different cardnumber and notice the same exact error message including the 'thisisabadcardnumber' cardnumber.
6. Apply this patch
7. Restart all the things!
8. Repeat steps 2-4
9. Try again with a different cardnumber, you should now see the correct
cardnumber!
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds the ACCTDETAILS notice trigger to the opac self
registration process. Allowing new users, with varification enabled,
to receive the ACCTDETAILS notice immediately after their account is
varified.
Test plan
1) Enable AutoEmailOpacUser system preference
2) Ensure the ACCTDETAILS notice is configured
3) Ensure `PatronSelfRegistrationVerifyByEmail` is enabled
4) Register a new user via the opac self registration process using an
email address you have access to
5) Verify the user by following the link in the verification email you
should have received.
6) The new user should have been created and you should be able to see
the account details notice in their associated notices
7) Confirm that the email address used above has received the notice.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds the ACCTDETAILS notice trigger to the opac self
registration process. Allowing new users, without varification enabled,
to receive the ACCTDETAILS notice immediately after their account is
created.
Test plan
1) Enable AutoEmailOpacUser system preference
2) Ensure the ACCTDETAILS notice is configured
3) Ensure `PatronSelfRegistrationVerifyByEmail` is disabled
4) Register a new user via the opac self registration process using an
email address you have access to
5) The new user should have been created and you should be able to see
the account details notice in their associated notices
6) Confirm that the email address used above has received the notice.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Although less harmful indeed. No borrowernumber, no image.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested: logged in, logged out, prefs toggled. All fine.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When system preference is off, call no code related to Koha::Recalls.
Also add some missing module import.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the different ->recalls accessors implemented on this
bug be more standard. This means:
- They don't do special things like default sorting or stripping out
special parameters. That's all left to the caller and the methods are
clean: they just return the related objects
- Useful filtering methods for Koha::Recalls resultsets are added. The
only used one (in the end) was ->filter_by_current. It seems like a
better approach, because it gives devs more control on how they want
to chain things, and there's a single place in which to maintain the
criteria of what is 'current' or 'finished'. This clearly makes the
'old' column obsolete IMHO, at least in the use cases I found. This is
covered by tests as well.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Due to the wantarray change, we should fix this call in list context.
We should either use an iterator now or append as_list.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
And making reverted ajax message clearer
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
- removing authnotrequired flag from scripts
- fixing opac buttons
- chmod +x for recalls test files
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
- place a biblio-level or item-level recall via the biblio detail page, OPAC search results, or course reserves
- view or cancel your active recalls from 'your summary' recalls tab
- view all active and inactive (and cancel active) recalls from 'your recall history'
- stopped from placing a reserve on an item that the patron has already recalled
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
On the ktd sample database when trying to go to the detail page from the result list:
Undefined subroutine &CGI::Compile::ROOT::kohadevbox_koha_opac_opac_2ddetail_2epl::searchResults called at /kohadevbox/koha/opac/opac-detail.pl line 260
Turning off OpacBrowseResults makes the error disappear.
In opac-detail.pl, use C4::Search is missing searchResults and getRecords
To test:
- Search for something that gives several result pages in OPAC, example: e
- Switch to one of the last pages using link on top of results, example: 10
- Open any of the records listed in detail view
- Verify that the error is shown
- Apply patch and repeat, error is gone and browsing behaves as expected
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The method Koha::AuthorisedValues->authorised_value is not covered by tests!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a 'holdable' and 'unholdable' class to the rows of the table
Additionally I rename the 'backgroundcolor' field to 'onloan' as that is what it contains.
Note: Out of the box, there is no css associated with this class
I add a div around the table to allow hiding the new buttons as well when optiuons are hidden
It would be nice in the future to utilise a Koha table here, however, it is complicated by multi-holds
To test:
1 - Add a number of items to a record, ensuring they belong to different libraries
2 - Set 'Default checkout, hold and return policy'->'Hold policy' to 'From home library'
3 - Sign in to opac and attempt to placehold on the record
4 - Click 'show more options' and 'a specificitem'
5 - Note holds table includes items that cannot be held
6 - Apply patch
7 - Reload holds page
8 - Note items that cannot be heldare hidden
9 - Click 'Show unholdable items' and note they appear
10 - Click 'Hide unholdable items' and veriofy they hide
11 - Test with multi holds
Signed-off-by: The Minh Luong <the-minh.luong@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 29844 forgot to add as_list to opac-search.pl.
You can see it changed search.pl
Patch fixes and also adds explicit interface = opac in get_search_groups() call.
Since intranet is explicit, opac should also be.
We keep opac as default value.
Test plan :
1) Create a libary group for OPAC and one for staff
2) Go to OPAC advanced search page
3) Check you see the OPAC libary group
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the opac/opac-privacy.pl OPAC page use the new
anonymize method.
To test:
1. Have some checked-in materiales
2. Have OPACPrivacy enabled
3. Notice your checkouts history contains what you expect
4. Go to 'your privacy'
5. Click on 'Delete checkout history'
=> SUCCESS: It works, no crash.
6. Sign off :-D
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The same way we have a button to immediately delete the checkouts history in the OPAC, we should have a similar option for the holds history.
This patch implements that.
To test:
1. Have a patron with some old checkouts and old holds.
2. Have OPACPrivacy, OPACHoldsHistory and opacreadinghistory enabled.
3. Notice in the OPAC the patron has some old checkouts and holds.
4. Use the Privacy tab to clean checkouts
=> SUCCESS: They are still cleaned as before this patch
5. Try to clean the old holds
=> SUCCESS: They are cleaned!
6. Add some old checkouts and holds
7. Use the new 'All' button
=> SUCCESS: All cleaned
8. Sign off :-D
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
Logout in OPAC.
Goto sco help page.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Certainly since bug 29543 and bug 29914.
We should do the same authentication check than sco-main.pl, and also
make sure to generate the checkout history only for the logged in patron
(the OPAC one, not staff member)
Test plan:
Use the different combinations of the SCO config (AutoSelfCheckAllowed,
SelfCheckoutByLogin and WebBasedSelfCheck) and confirm that this patch
fixes the SCO print slip feature.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
On bug 29844 we decided to remove wantarray from Koha::Objects->search.
Reviewing the difference occurrences I found some unnecessary uses of ->as_list,
where iterators should be used instead.
This patch only removes the obvious places, not the tricky ones.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
and some more...
There are lot of inconsistencies in our ->search calls. We could
simplify some of them, but not in this patch. Here we want to prevent
regressions as much as possible and so don't add unecessary changes.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
I think this is a better approach for the same thing. Posting it just in
case it helps.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We must check if logged in user is trying to modify one of their
checkouts
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Checkin or renew must be restricted to the items they own.
Test plan:
Create an item with barcode bc_1
Check it in to user A
Login to SCO with user B
Get the token using the browser dev tool, from the cookie
Hit (replace $JWT)
/cgi-bin/koha/sco/sco-main.pl?jwt=$JWT&op=renew&barcode=bc_1
/cgi-bin/koha/sco/sco-main.pl?jwt=$JWT&op=returnbook&barcode=bc_1
You should see an error message
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The self-checkout feature is assuming a patron is logged in if patronid
is passed. It also assumes that "We're in a controlled environment; we
trust the user", which is terribly wrong!
This patch is suggesting to generate a JSON Web Token (JWT) to store in
a cookie and only allow action (renew, check in/out) is the token is
valid. The token is only generated once the user has been authenticated
And is removed when the user finish the session/logout.
Test plan:
You must know exactly how the self-checkout feature works to test this patch.
The 4 following sysprefs must be tested:
SelfCheckoutByLogin, AutoSelfCheckAllowed, AutoSelfCheckID, AutoSelfCheckPass
Confirm that you can renew, checkin for the items you own, and checkout new items.
Confirm that you are not allowed to access other account's info.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
It's not used in template
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
It's not needed, we have $patron
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Most of the changes here are simple, this can be read to view the changes
Testing that holds can be placed via staff client, and opac, and are disallowed
when expected is the best test plan, beyond running the unit tests
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the call to overdrive_proxy to allow passing a version
and updates the code to use V2 for availability
To test:
1 - Enable OverDrive integration by setting the sysprefs
2 - Log in to your overdrive account in the Koha opac
3 - Perform a search and note availability display
4 - Confirm you can checkout/hold/return books
5 - Apply patch
6 - Repeat search and test functionality
7 - Note that title with '0 out of 0 copies available' now say 'Currently unavailable'
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds public note to the table of information shown about
items when placing a hold on a specific item in the OPAC.
To test, apply the patch and check Administration -> Circulation and
fine rules. You should have at least one patron category/item type
configured to allow OPAC item level holds.
- Modify an item to add information to the "Public note" field.
- Locate that record in the OPAC and place a hold on it.
- On the "Placing hold" page, click "Show more options" and "A specific
item."
- In the table of items you should see a "Notes" column showing the
information you added to the item.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch:
- Adds a notice about the fee to be charged to the patron (staff and
OPAC)
- Adds the right UI description for ARTICLE_REQUEST_FEE debit types in
the UI.
To test:
1. Have some article request fee rules
2. Play with placing an article request in OPAC and staff
=> SUCCESS: You see a message about the fee
=> SUCCESS: The fees are correctly applied to the patron
3. Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The expiration date picked by the patron (or librarian) when placing a
hold is lost when a waiting hold is reverted.
We need a separate DB field to store this value and restore it when
needed: patron_expiration_date
The new behaviours are now:
Create a hold and specify an expiration date:
expirationdate=patron_expiration_date
Fill the hold:
expiration_date is calculated
expiration_date set to the calculated value or to
patron_expiration_date if anterior
patron_expiration_date not modified
Revert the waiting status:
expirationdate set back to patron_expiration_date
Cancel expire reserves:
if < expirationdate OR < patron_expiration_date
Note: This change should not be needed but won't hurt
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Florian Bontemps <florian.bontemps@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch modifies the checkout_download_url routine in
WebSerivce::ILS::OverDrive::Patron
We now directly hit the fulfillment endpoint with redirects disabled
and fetch the URL
The overdrive.js is modified to use a single 'Get item' button for all
checked out items and to refer to the fulfillment page
To test:
1 - Enable all OverDrive system preferences
2 - Search on opac and confirm OD results returned
3 - Checkout an item
4 - Confirm you have the new 'Get item' button on 'OverDrive account'
tab on opac-user.pl
5 - Confirm the 'Get item' button works
NOTE:
Most items will also show the 'Get item' button in results, however,
magazines may not as each checkout has a unique 'reserve id' and the
'parent' id is not checked in our current code
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We should not explode if the biblionumber passed in not in DB.
Test plan:
Hit /cgi-bin/koha/opac-reserve.pl?biblionumber=42424
and notice the error message.
Without this patch you got
Can't call method "holds" on an undefined value at
/kohadevbox/koha/opac/opac-reserve.pl line 172
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The crash is a result of a not found borrower. This is typically
a bad or repeated recovery attempt.
Test plan:
Do a password recovery.
Use the mailed URL twice.
Without this patch, the second attempt crashes.
With this patch, the second attempt shows an error dialog.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
See bug 24185, this avoids looping every each item of the record for every item of the record
How to reproduce:
1) on freshly installed kohadevbox create/import one book,
remember that biblionumber for later use it in down below,
2) add 100 items for that book for some library,
3) find some patron, that patron's card number we will
use as a borrower down below to open holds page,
4) check for the rule or set up a single circulation rule
in admin "/cgi-bin/koha/admin/smart-rules.pl",
that rule should match above book items/library/patron,
check that rule to have a non-zero number of holds (total, daily, count) allowed,
and, IMPORTANT: set up "On shelf holds allowed" to "If all unavailable",
("item level holds" doesn't matter).
5) open "Home > Catalog > THAT_BOOK > Place a hold on THAT_BOOK" page
("holds" tab), and enter patron code in the search field,
or you can create a direct link by yourself, for example, in my case it was:
/cgi-bin/koha/reserve/request.pl?biblionumber=4&findborrower=23529000686353
6) it should be pretty long page generation time on old code, densely increasing for every hundred items added. In the case of this solution, it's fast, and time increases a little only, linear.
In testing with 100 books I went from ~6.5 seconds to ~3.2 seconds
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch builds on the change introduced by Bug 22844, changing the
selection mode for the OPACSuggestionMandatoryFields and
OPACSuggestionUnwantedFields preferences to a modal.
This patch includes a database update for converting the format of the
saved values in these preferences. Previously the suggestions table
fields would be separated by a comma. Now they should be separated by a
pipe.
To test, apply the patch run the database update.
- Go to Administration -> System preferences.
- Search for 'OPACSuggestion.'
- The input fields for OPACSuggestionUnwantedFields and
OPACSuggestionMandatoryFields should appear as "locked" (read-only)
inputs.
- Clicking either input field should trigger a modal window with
checkboxes for each available column in the suggestions table.
- Test that the "select all" and "clear all" links work correctly.
- Test that the "cancel" link closes the modal without saving your
selections.
- Test that the "Save" button closes the modal, copies your
selections to the form field, and triggers the preference-saving
function.
- Test that changes to both preferences are correctly reflected in the
OPAC suggestion form.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Caused by
commit 586bed1319
Bug 28941: Filter suggestion inputs at the OPAC
We are loosing the link with the biblio (suggestion.biblionumber)
Test plan:
At the OPAC, go to the detail page of a bibliographic record, click
"Suggest for purchase" and submit the form.
Without this patch the suggestion is created but the link to the
bibliographic record is lost
With this patch applied you should see that suggestions.biblionumber has
correctly been preserved
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Wrong key 'xsl_filename' is present in opac-tags.pl and shelves.pl
(the only places where it is used in the code even) instead of
'xsl_syspref' that is actually used and this is the cause of those
warnings.
Also added honeypot to check if other calls in same way happens.
Honeypot probably not needed, review when QA in the Community.
To reproduce (shelves.pl):
1) Prepare some test list with items or use existing one.
2) Go to the lists page (koha/virtualshelves/shelves.pl),
notice multitude of new warnings in the "intranet-error.log" log file
that mostly have to do with "Use of uninitialized value $xslsyspref".
3) Apply the patch.
4) Go back to same page and check it again, warns like that should not
appear in the log file anymore.
To reproduce (opac-tags.pl):
1) Go to the "my tags" page in OPAC and open "tag cloud".
2) Notice a bunch of new warnings in the log file that mostly have to
do with "Use of uninitialized value $xslsyspref".
3) Apply the patch.
4) Reload the page and check the log file again.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Applies to opac and intranet script.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Minimal fix to improve bad indentation a bit, moving to 2 spaces.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We are adding (or already doing) a Koha::Biblios->find, so we should
get rid of GetBiblioData, fetching the same data.
It returned a few extra columns, but unused here:
$dat->{bnotes}, $dat->{bi_notforloan}
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
There's no way to use 'no' XSLT now, so don't need to use this to show
authors on the detail page.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch moves C4::Biblio::GetMarcAuthors to
Koha::Biblio->get_authors_from_MARC. This is so the method can be
used in templates and notices.
To test:
1. Find a record that has an author in the added entry field (700-720).
2. Add the record to the cart and a list.
3. View your cart and click 'more details'. Confirm authors show as
normal.
4. Click 'send' and confirm the email sent shows the authors as normal.
5. Go to the list you added the record to and click 'send list'. Confirm
the email sent shows the authors as normal.
xslt)
6. Log in to the OPAC. Find the record and add it to the cart and a list
7. View the cart and click 'more details'. Confirm authors show as
normal.
8. Click 'send' and confirm the email sent shows the authors as normal.
9. Go to the list you added the record to and click 'send list'.
Confirm the email sent shows the authors as normal.
10. Confirm tests pass:
- t/Biblio.t
- t/db_dependent/Koha/Biblio.t
Sponsored-by: Bibliotheksservice-Zentrum Baden-Württemberg (BSZ)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
TEST PLAN:
1. Apply patch, updatedatabase, restart_all
2. In the PatronSelfRegistrationBorrowerMandatoryField add the field password.
3. Go to the self registration page on make sure password is required.
4. Now go to the OPAC modification page, make some changes and attempt to submit. It should work.
5. Go to PatronSelfModificationMandatoryField and select some fields.
6. The columns you selected should now be required.
7. On the PatronSelfModificationMandatoryField page, make sure the select all and clear all buttons work.
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We dropped it on bug 12561 when removing the non-XSLT view. This feature
has never been implemented for XSLT views and the pref must then be
removed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This reads better when converted to regular if.
Note that last within such a block is allowed in Perl, but it feels
better to use it only in a loop context.
Test plan:
Read the patch ;)
Bonus: Test if you enter the block by using pref OPACSuggestionMandatoryFields
when adding a suggestion from opac.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Edit: Added a space between 'if' and '(' :-D
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The OPAC authority details page is broken when the 'AuthDisplayHierarchy'
System Preference is set to 'Enable',
This patch fixes that.
Test plan:
1) Set AuthDisplayHierarchy to 'Enable' and try to view the details
page of an authority in the OPAC -- the page is broken.
2) Apply this patch.
3) Refresh the page; this time the authority details are displayed.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
From commit 586bed1319
Bug 28941: Filter suggestion inputs at the OPAC
But later in the script we send { suggestion => %$suggestion } to the
template and so erase the variable previously passed.
Test plan:
Login at the OPAC
Go to the bibliographic detail page
Suggest for purchase
=> The form must be prefilled!
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1. Add some news that should display on opac-readingrecord.pl. For example: opacheader, OpacCustomSearch, opaccredits
2. Go to opac-readingrecord.pl, the news doesn't display
3. Apply patch, restart_all
4. Go to opac-readingrecord.pl, the news displays
5. Turn on 'opacreadinghistory' and test to make sure it still works
Signed-off-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It is a confusing name because we have 'Article Request' as a feature,
and this does not follow Koha terminology.
Test plan:
`updatedatabase` and confirm that the syspref has been renamed
`git grep RequestOnOpac` => No occurrence in the code
QA: The syspref's value is always retrieved using Koha.Preference from
.tt files, we don't need to send it from controllers or C4::Auth
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the ability to set a library as 'public' or not; this
allows librarians to hide back office library branches from the opac.
Test plan
1/ Set a library as public from `admin > libraries`.
2/ Navigate to the `Libraries` page in the OPAC
3/ Note that only `public` libraries are displayed.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Note that without the use URI::QueryParam statement in C4::Auth we get:
Can't locate object method "query_param_delete" via package "URI::_generic" at /kohadevbox/koha/C4/Auth.pm line 1254
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
- There are CAS demo servers, pick one [1]
- They all seem to have the same user/pass as of writing this:
User: casuser
Password: Mellon
To test:
1. Enable CAS and all related preferences. I chose v3 or higher, it only affects the logout action.
2. Set the CAS URL: https://casserver.herokuapp.com/cas (note that if you click on any of the examples, they include a trailing /login, don't put it).
3. Generate a Koha user, with userid: casuser (I also used that for cardnumber, just in case). Set no password to the user, or its irrelevant anyway. Add it stff permissions.
4. Open your Koha OPAC, I use KTD thus:
http://kohadev.myDNSname.org:8080
5. Try to login using CAS
=> SUCCESS: You are redirected to the right login page
6. Login using casuser/Mellon as advertised in the 'demos' site.
=> SUCCESS: You are logged in!
7. Now logout
=> SUCCESS: You are sent to CAS so they know you wanted to logout (if you enabled CAS logout)
8. Repeat on the staff interface.
=> SUCCESS: Things work!
9. Apply this patches, restart all the things:
$ restart_all
10. Repeat all in OPAC and admin interfaces
=> SUCCESS: Things work!
11. Sign off :-D
[1] https://apereo.github.io/cas/Demos.html
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patchset moves the 'category' attribute for virtual shelves, that
takes values of 1 and 2 (private and public respectively) into a boolean
for public.
The DBRev is trivial, and the changes to the code are as well.
To test:
1. have some known public and private lists
2. Apply this patches
3. Run:
$ updatedatabase
=> SUCCESS: Public lists have public=1, private have public=0
4. Run:
$ kshell
k$ prove t/db_dependent/Utils/Datatables_Virtualshelves.t \
t/db_dependent/Virtualshelves.t
=> SUCCESS: Tests pass!
5. Try the feature in staff and OPAC
=> SUCCESS: All good
6. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This removes the 'edit_borrowers' permission from OverDrive search
To test:
1 - Enable OverDrive via koha system preferences
2 - Sign in to opac with a user with no permissions
3 - Perform a search that will return OD results, 'love' works
4 - Click thje "Found XX results in the library's OverDrive collection"
5 - Note you are logged out of Koha
6 - Apply patch
7 - Repeat
8 - Success
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch restores the functional fixes introduced in bug 29284 and
also prevents the 'Show analytics' link from displaying when no
component parts are found and inline display is enabled.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: Fixed error with $err vs $error(s) :)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We were fetching components in the first call of XSLTParse4Display
(opac-detail around L220). And again (opac-detail around L660).
Same for catalogue/detail.pl.
Moving the XSLT block in both scripts and removing the code from
XSLT.pm which again makes the tests obsolete.
Not hiding the link when there are components. Might be helpful too.
Also fixing biblionumber in the XSLTParse4Display call for parts.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch restores the link to 'more results' should you exceed the
hard coded limit of 300 component parts.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates the default details tab selection to components for
the case when there are no holdings attached to the record and there is
no HTML5 content to display in preference.
Bug 11175: (QA follow-up) OPAC - Display components tab if no holdings
As for the staff client, this selects the default tab to be 'Components'
for the case where no holdings are found.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Thanks to a comment from Andrew, I discovered that the return from
simple_search_compat actually differs depending on if you are using
ElasticSearch or Zebra. The 'results' arrayref contains MARC::Record
objects for ES and raw marc strings if you are using Zebra. This is
actually already dealt with in the misnamed new_record_from_zebra
function inside C4::Search.. so this patch simply replaces our
MARC::Record instantiation code with a call to that function.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates the display so that rather than displaying the
components using the main XSLT and then using CSS to move them into a
box on the right side for display, which causes issues with RTL records;
We instead add them in a new tab beneath the rest of the record details
alongside holdings and other details.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Bug 11175: (QA follow-up) Fixes for bug 12561
Bug 12561 changed the prototype for XSLTParse4Display so this patcha
accounts for the additional calls to that method introduced in this
patchset.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We can simplify the code introduced by bug 15851 by moving the
'show_analytics_link' variable assignment into C4::XSLT and thus making
the code more DRY.
Taking the code in bug 15851 as inspiration this patch also adds proper
handling for UseControlNumber vs EasyAnalytics style 773 linking and
ensures we only return analytic component parts and no other records
containing 773's.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds an eval around the call to search for analytic records
It pases a value to the template on the staff side, but logs the warning on
the opac
This seems similar to 'decoding_error' which is noted on staff side, but absent on OPAC
The eval follows the patter used during searching
To test:
1 - Add a title to catalog, with 245a:
Digger does it all (not really!)
2 - Set searchEngine preference to: Elasticsearch
3 - The record does not load
4 - Apply patch
5 - The record loads, there is a note about analytics at the top fo the record
6 - View record in opac, no note
7 - Check logs on intranet and opac, searching error is logged
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is based on Julian's idea on bug 28026 where we could get rid of call_recursive by passing refs as arguments to call.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Koha/Plugins/Plugins.t
3) prove t/db_dependent/Koha/Plugins/Barcode_transform_hooks.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It's not used.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The previous patch makes check_cookie_auth return the session instead of
$sessionID, so we are adjusting the different calls to prevent
confusion.
However they are mainly used to check the authentication status and
don't care about this second variable.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Show the TOC checkbox on OPAC and staff.
Test plan:
Add new article request on OPAC or staff. Tick checkbox.
Verify if TOC is Yes on opac-user or staff patron details.
Check the list view on circ/article-requests.pl.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It has been missed on bug 17600.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Adjusted commit title.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes Koha::Patron->article_requests use the underlying DBIC
relationship and _new_from_dbic instead of a plain search. It also
refactors 'article_requests_current' and 'article_requests_finished' to
use ->article_requests, as well as the new methods introduced by bug
29082 for filtering.
No behavior change should take place.
To test:
1. Apply the unit tests patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Patron.t \
t/db_dependent/ArticleRequests.t
=> SUCCESS: Tests pass!
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Sign off :-D
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 29083: Unit tests
This patch adds missing tests for Koha::Patron->article_requests and
moves (and extends) tests for 'article_requests_current' and
'article_requests_finished' that were originally in ArticleRequests.t
into Koha/Patron.t as we now do.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/ArticleRequests.t \
t/db_dependent/Koha/Patron.t
=> SUCCESS: Tests pass!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 29083: (QA follow-up) Remove unused param
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 29083: Fix OPAC listing of article requests
This patch makes the OPAC template reuse a precalculated value for the
active article requests for the patron (and its count).
The original code relied on the methods returning a list, which is not
the case for _new_from_dbic until bug 28883 is pushed.
This patch fixes that.
Note: there was an odd behavior when ArticleRequests was enabled but no
active article requests were present: the tab wasn't rendered but the
'empty table' with the 'You have no article requests currently.' message
was displayed below the Checkouts tab. I'm not sure that was caused by
this patches, or other. Fixed on this patch.
To test:
1. In the OPAC, go to 'your summary'
=> FAIL: Things don't show for article requests
2. Add some article requests and repeat 1
=> FAIL: Something's wrong there
3. Apply this patch and repeat 1
=> Yes! Things show correctly!
4. Cancel all your article requests
=> SUCCESS: Things render as they should
5. Re-enter the 'your summary' page (to force re-rendering)
=> SUCCESS: Things render correctly for empty article requests
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 29083: Remove article_requests_finished and article_requests_current
This patch removes those methods that are not really needed. Templates
are adjusted to use the expected combination of
->article_requests->filter_by_current.
To test:
1. Apply this patch
2. Visit a patron with article requests
=> SUCCESS: All works
3. Run:
$ kshell
k$ prove t/db_dependent/Koha/Patron.t
=> SUCCESS: Tests pass, less tests.
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some of our partners have unusual barcode requirements that have
required us to transform scanned barcodes using javascript. This is not
the most reliable method. It would make more sense to have Koha
transform the barcodes on the backend using a plugin. We should add
hooks to transform and generate new item and patron barcodes.
Test Plan:
1) Apply this patch
2) Download and install the Barcode Transformer plugin
https://github.com/bywatersolutions/koha-plugin-barcode-transformer/releases/download/v1.0.1/koha-plugin-barcode-transformer-v1.0.1.kpz
3) Go to the plugin configuration page, set the configuration to the example configuration from the same page
4) In the patron search and anywhere else you can scan a patron
cardnumber, type in some cardnumbers but prefix them with A and postfix
them with A or B, e.g. A12345A, A12345B
5) Note the letters are removed by Koha!
6) Try a cardnumber like X123456Y
7) Note Koha converts it to Z13456Z
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some of our partners have unusual barcode requirements that have
required us to transform scanned barcodes using javascript. This is not
the most reliable method. It would make more sense to have Koha
transform the barcodes on the backend using a plugin. We should add
hooks to transform and generate new item and patron barcodes.
Test Plan:
1) Apply this patch
2) Download and install the Barcode Transformer plugin
https://github.com/bywatersolutions/koha-plugin-barcode-transformer/releases/
3) Go to the plugin configuration page, set the configuration to the example configuration from the same page
4) In the item barcode field on the checkin and checkout pages,
and anywhere else you can scan an item barcode, type in some
valid barcodes, but prefix them with X and postfix them with
Y, e.g. X123456Y
5) Note the letters are removed by Koha!
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Fix QA script issue
* Fixes issue with barcode generate stub so perlcritic is happy
* Removes extra semicolon from return call in configure method
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: Add unit tests
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Remove unused method barcode_transform
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Rename barcode_transform to item_barcode_transform
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Barcodes inputted into Koha should always pass though barcodedecode
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Catch one last case of itemBarcodeInputFilter
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Fix Checkouts.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: Use call_recursive() as a replacement for call()
The method `call()` is not sufficient for barcode transformations. It's
possible that more than one barcode transformation plugin will be
installed. The `call_recursive()` method takes the output of the first
plugin and uses it as the input for the next plugin and so on. This allowes
each plugin to see the current version of the barcode and modify it if
necessary.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: Fix t/db_dependent/Koha/Plugins/Circulation_hooks.t
Bug 26351: Revert improper change to unit test, fix number of tests
Bug 26351: Remove uneeded use Koha::Plugins statements
Left over from previous changes
Bug 26351: Add missing barcodedecode import
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds better error handling and reporting when placing an
article request fails. It also makes the error messages translatable.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes it possible to limit article requests per patron per day.
To test:
1. Apply patches
2. updatedatabase
3. Enable ArticleRequests preference
4. Edit a patron category and set an article request limit to 1
CHECK => if you set the limit to anything else but a positive number or empty string, a warning appears
5. In staff search biblios and request an article for a patron of the modified category
6. Repeat step 5
SUCCESS => if limit is reached, when you select the user to request an article a warning appears saying that the limit was reached
7. Repeat steps 5 and 6 but this time in opac
SUCCESS => Patron is not allowed to request another article if limit is reached
8. prove t/db_dependent/ArticleRequests.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Edit: This patchset originally changed the 'categories' table structure
and relied on that for limit calculation. I removed all that code and
squashed into this one, as we moved everything to the circulation_rules
table.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Remove fields from OPACSuggestionUnwantedFields before creating the
suggestion
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
JD amended patch: remove useless sort
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The following sequence is bad:
46 my $suggestion = $input->Vars;
181 &NewSuggestion($suggestion);
All columns can be set when we insert the suggestion into the DB
We definitely want to avoid the following fields to be set by the final
user: acceptedby, accepteddate, STATUS, etc...
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch prevents an existing user from exploiting the patron edit form in order to
force create new patrons
To test:
Try all combinations of PatronSelfRegistration and PatronSelfRegistrationVerifyByEmail
with and without this patch.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Security patch. Follow-up for 28929.
Including correction for gonenoaddress and two others.
Includes unwanted fields too now.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
* selfreg and selfmod for OPAC
* patron's edition on staff
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested OPAC and staff side. Prevents mangling flags column.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To ease testing and future changes if needed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Create a library group as an OPAC search group
2 - Enable OpacAddMastheadLibraryPulldown
3 - Browse to:
http://localhost:8080/cgi-bin/koha/opac-search.pl?idx=&q=t&branch_group_limit=multibranchlimit-1&weight_search=1
4 - Confirm search works and returns correct results
5 - Confirm dropdown is correctly populated
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes the code from the search scripts into QueryBuilder
modules.
To test:
1 - Have a library group defined as a search group for both staff and opac
2 - Search on staff client and opac with that group limit and a single branch limit
3 - Note your results/counts
4 - Note the visuals of the search description
5 - Apply patch
6 - Repeat searches
7 - All should work as before
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If a record is deleted from Koha, but is for some reason not deleted from the search indexes, OpacBrowseResults can cause an ISE if the deleted record is in the search results for any given item. OpacBrowseResults loops through the search results, and checks if there is a biblionumber, but does *not* check to see if a result was pulled from the database for that biblionumber. It simply assumes the result must exist.
We should be checking to ensure the biblionumber was valid before operating on the biblio object.
Test Plan:
1) Use zebra for searching
2) Disable koha-indexer
3) Enable OpacBrowseResults
4) Perform a search
5) Delete an item in the search results
6) View on of the remaining items in the search results
7) Note the error
8) Apply this patch
9) Restart plack
10) Reload the page
11) The error should be gone!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
RSS feeds are now generated using opac/opac-search.pl (format=rss).
But prior to
commit 09df0de35f
Removing obsolete RSS <link> tags and the scripts
it was using opac/opac-rss.pl, which used opac/rss
The directory should have been removed by this commit.
Test plan:
Confirm that this directory is useless and can be removed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The ISBD view in the OPAC interface does not display item information.
This patch fixes that.
Test plan:
0) Have a biblio with at least one item attached to it and include one
of the following snippets in the OPACISBD system preference,
depending on your MARC flavour:
MARC21:
#952|<br/><h2>Items</h2><table><th>Copy number</th><th>Shelving
location</th><th>Koha item type</th><th>Barcode</th><th>Call number
(Full call number)</th><th>Materials specified (bound volume or
other part)</th>|<tr><td>{952t} </td><td> {952c} </td><td> {952y}
</td><td> {952p} </td><td> {952o} </td><td> {9523}</td></tr>|</table>
UNIMARC:
#995|<br/><h2>Items</h2><table><th>Copy number</th><th>Shelving
location</th><th>Koha collection</th><th>Barcode</th><th>Call number
(Full call number)</th><th>Numbering (volume or other part)</th>|
<tr><td>{9956} </td><td> {995e} </td><td> {995h} </td><td> {995f}
</td><td> {995k} </td><td> {995l}</td></tr>|</table>
Switch to the OPAC ISBD view for your biblio; notice how it does
not display item information.
1) Apply the patch, and restart Plack/memcached if necessary.
2) Refresh the OPAC ISBD view page, this time you should see item
information as per the OPACISBD system preference setting.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It could lead to server freeze if set to a big value (we are pushing
into an array and so RAM is being fulfilled, and CPU is looping).
I don't understand the point of this cookie.
var numPar = $("#booleansearch fieldset p").size();
if (numPar > [% search_boxes_count | html %]){
jQuery.cookie("num_paragraph", numPar,{ path: '/'});
}else{
jQuery.removeCookie("num_paragraph", { path: '/'});
}
But "#booleansearch fieldset p" does not exist, it's not 'p' but 'div'
elements.
I've removed the code related to num_paragraph and the "Return to the
last advanced search" feature still works as before.
From this comment:
# determine what to display next to the search boxes (ie, boolean option
# shouldn't appear on the first one, scan indexes should, adding a new
# box should only appear on the last, etc.
The only bit that is not working as described is "adding a new box
should only appear on the last", but it has been working this way for
a long time already I think, and I don't see it as a bug.
Test plan:
Read the code, check that the above is correct.
Search for regression in this "return to last adv search" feature added
by bug 13307.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
One big patch for one big move.
The "News" feature (opac_news) has been hijacked to handle some system
preferences (bug 26050). The goal was to take profit of the UI (editor)
and the ability to translate the value.
Disclaimer: This patch is NOT offering the best implementation but, as
we still don't have bug 24975, it cannot be done now. And no, we don't
want to wait for it to move forward here. This patch is going into the
right direction anyway.
This enhancement is going to rename the "News" with a more genertic
"Additional contents". We have two different "categories" of content:
"news" and "html customizations".
What does it bring?
- A split on the UI for disambigate the two types of content (news and
syspref/html customizations)
- A simplification of the edit form: all languages will be translatable
on the same view (like the "notice templates")
- Ground will be prepared for different types of content (if needed later)
- Staff news can be translated
How was the "News" area working before this patch?
The opac_news DB table contained a (very inconsistent) 'lang' column.
The different values were:
- '' => news to display at the OPAC and staff interfaces
- 'koha' => news for staff only
- 'slip' => news for slip notices
- $lang => news for OPAC only, translated in $lang ('en', 'es-ES', etc.)
- "$location_$lang" => A syspref moved to this "news" area. The syspref
is $location, and is translated in $lang. Eg. OpacLoginInstructions_en,
OpacLoginInstructions_fr-FR, opacheader_es-ES
This patch is improving the DB structure with the following changes:
- renaming 'opac_news' with 'additional_contents'
- new 'category' column
=> 'news' or 'html_customizations'
- new 'location' column
=> For 'news': 'staff_and_opac', 'staff_only', 'slip'
=> For 'html_customizations': the old syspref name (eg. 'OpacLoginInstructions').
- new 'code' column (see later for more info)
- the 'lang' column will only contain the language code ('en', 'es-ES',
etc.). BUT a 'default' entry will ALWAYS exist for fallback behaviour.
We are getting closer to the 'notice template' table structure because
we want to match its UI. The 'code' column will bring us the ability to
group the different 'additional_contents' rows. The code for a given
news will be the same, but the (lang, title, content) will differ.
Examples:
News 1 will have, for each of the translated versions
(category, code, location, branchcode)
('news', 'News1', $location, $branchcode||undef)
And the 3 following columns will differ:
(title, content, lang)
('title for news 1', 'content for news 1', 'default')
('titulo para 1', 'contenido para 1', 'es-ES')
Note that the "category" is not strictely necessary, but it seems better
to have the ability to split the different content by category/type
easily.
Additional changes:
- Syspref 'NewsToolEditor' is renamed 'AdditionalContentsEditor'
- Koha::NewItem => Koha::AdditionalContent
- Koha::News => Koha::AdditionalContents
- Script and template renamed from koha-news to additional-contents
- Foreign keys have been renamed
- Subpermission edit_news has been renamed edit_additional_contents
- The UI can now be accessed via a "News" or "HTML customizations" link
from the tools module. The related contents will then be displayed (both
categories are now split)
Changes not done here:
- Primary key 'idnew' could be renamed 'id'
Limitations of the upgrade:
News cannot be grouped by a unique code for existing translations.
=> A given news will be now displayed several times on the translated
interface
Any ideas to improve the upgrade behaviour?
We will have to add a warning in the release notes to tell libraries to
review their news.
Test plan:
0. Don't apply the patches
1. Translate the interfaces in some languages
. Create some news for staff and OPAC
. Create some content for different entry of HTML customizations
Note that you are forced to define a 'default'.
Also note that you are only forced to fill the title (not the content).
This is certainly problematic (see FIXME in the code) as sometime only
the content is displayed.
. Play with the interface (edit, delete, filter)
. Go to the different places the news are displayed, and confirm they
are displayed correctly (staff home, opac home, opac rss)
. Create 1+ news for 'slip', check an item out and 'print slip' (from
the circulation page). You must see the news.
. Go to the different places you are expecting the HTML customizations
to be present and confirm that you see them.
. Switch the lang of the interface and confirm that you now see the
content in the translated version
. Generate the templates in another language, don't translate the
content
. Use this language for the interface and confirm that the 'default'
version is displauyed.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Use a hash for better readability and reusability.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is the only remaining non-XSLT only feature. We should remove the
non-XSLT views that have been deprecated for a while now, and remove
this feature.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If we no longer offer the sortfield with :asc actively, we should
probably write it somewhere too.
Replaced a few defined tests by empty test. No need to split empty
string or zero etc.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a check for a 'direction' paramter in list sorting.
It maintains the existing syntax for sorting 'sortfield=field:direction'
but adds support for the form used in paginations and more commonly thtoughout
Koha' sortfield=field&direction=direction'
To test:
1 - Create a public list
2 - Add enough items to generate two pages (40 worked for me)
3 - View the list and enforce sorting by date added descending:
sortfield=dateadded:desc
4 - Note the titles shown
5 - Click to second page using the pagination bar
6 - Note the same titles are shown, in a reversed order
7 - Apply patch
8 - repeat 305
9 - Second page is sorted correctly!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
TO test:
1 - Write a report
2 - Click the svc link in the saved reports list
3 - ISE
4 - Make report public
5 - Click the svc link in saved reports list
6 - ISE
7 - Apply patch
8 - Comfirm opac/public link works
9 - Make report not public
10 - Confirm the internal svc link works
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
From
commit b7acefa116
Bug 27948: (follow-up) Use Koha.news and PROCESS koha_news_block to bring disclaimer
opac/opac-request-article.pl changed file mode from 100755 to 100644
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We need to add the format to the forms entering new requests:
opac/opac-request-article
circ/request-article
If the pref contains multiple formats like SCAN|PHOTOCOPY, the first listed
format will be preselected on the request form. If there is only one option,
we should not disable the select however. (Possibly hide it.)
If we have no mandatory fields, we should not allow the submit of a complete
empty form (check on OPAC).
And we need to show the format of pending requests on forms:
opac/opac-user
circ/request-article (biblio detail tab)
circ/article-requests (staff form to handle requests)
members/moremember (Article requests tab at the bottom)
circ/circulation (Checkout/Article requests tab)
Note: The last two forms use the same include file.
Test plan:
[1] Add an article request via opac or staff. Choose Scan.
[2] Verify that you see the Scan format on opac-user and the
above-mentioned staff forms.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
