In the code available today (14-Jun-2011), in Koha git's "master" branch,
the file "Accounts.pm" (in the "C4" directory) has the variable "$sth"
declared 3 times in the "makepayment" sub. This causes the following
warnings to appear when running "make test" in Koha installation, for
several tests:
t/Heading.t ......................... "my" variable $sth masks earlier declaration
in same scope at kohaclone/blib/PERL_MODULE_DIR/C4/Accounts.pm line 172.
"my" variable $sth masks earlier declaration in same scope at
kohaclone/blib/PERL_MODULE_DIR/C4/Accounts.pm line 188.
[...]
t/ILSDI_Services.t .................. "my" variable $sth masks earlier declaration
in same scope at kohaclone/blib/PERL_MODULE_DIR/C4/Accounts.pm line 172.
"my" variable $sth masks earlier declaration in same scope
at kohaclone/blib/PERL_MODULE_DIR/C4/Accounts.pm line 188.
[...etc...]
Therefore, I'm removing the "my" keyword from the declarations of "$sth"
in lines 172 and 188 of "Accounts.pm".
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
For Koha with UNIMARC a lot of entries in apache log lines are produced.
In the patch, corrections to the GetCOinSBiblio function has been introduces,
in the UNIMARC section: (i.e. || '' at the end of lines that can create this
problem) -- analogous as it is in the MARC21 section.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The subroutine for sending HOLD and HOLD_PRINT notices only checked the
"email" field of the borrowers table and didn't check the value of the
AutoEmailPrimaryAddress preference. With this patch, "Hold filled"
notices can now be sent using the other email addresses of the member.
http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=5867
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
This requires us to specify all LDAP mappings in koha-conf.xml in lowercase,
instead of original case used withing LDAP.
Compare readability of
<userid is="hrEduPersonUniqueID" ></userid>
(which doesn't work) with required (and non-intuitive)
<userid is="hredupersonuniqueid" ></userid>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
05eb43f5fc reverted a previous
implementation of 3674.
3674 was encoding the password field when it was meant to be disabled
(password='!'), and then, in Auth.pm we were trying to compare an
encoded '!' with '!', which will never succeed.
This gets sure we encode only provided passwords and also includes an
auto generated login.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Excluding entries in old_issues which have a NULL itemnumber
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This CPAN module is needed for the ShowReviewerPhoto functionality.
Unfortunately the version in Squeeze (1.02) is not sufficient so it
has to be installed from CPAN:
sudo apt-get install libnet-dns-perl libtest-warn-perl
sudo cpan Gravatar::URL
Signed-off-by: Francois Marier <francois@debian.org>
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This new system preference (in OPAC Features) allows libraries to
turn off reviewer photos entirely if they want to. The default is
for these photos to be shown.
Note that this setting is linked to ShowReviewer in that both of
them need to be turned ON for the avatars to be displayed.
Signed-off-by: Francois Marier <francois@debian.org>
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Some spreadsheet programs use smart quotes which causes the db to throw
an error when an insert/update is attempted due to improper processing
of the CSV file. This patch adds code to check for smart quotes and change
them to "dumb" quotes.
This patch also adds more logging of errors and a notice to the user to check
the logs for errors when they occur.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Huge thanks to Katrin Fischer for spotting what was the trouble here!
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Now a blank cardnumber will get stored as a null in the database, which
is a value that allows duplicates. As such, if cardnumbers aren't
mandatory, then you can actually save a user with it being blank.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
When the message name was updated from "Hold Filled" to "Hold_Filled" for T::T compatibility,
the line in _koha_notify_reserve that looked up the letter code by the message name no longer
matched, so none of the messages were sent. This patch just replaces the space with an underscore
to get the names aligned properly.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
When using
<replicate>0</replicate> <!-- add new users from LDAP to Koha database -->
<update>0</update> <!-- update existing users in Koha database ->
<auth_by_bind>1</auth_by_bind> <!-- set to 1 to authenticate by
binding instead of password comparison, e.g., to use Active Directory -->
Auth_with_ldap attempts to lookup the userid in the LDAP directory to
fill $userldapentry despite it being unneeded in this case. The information
retrieved will be thrown away, thus there is no need to retrieve it.
This can cause authentication to fail overall even if the initial bind with the
user's credentials succeeded
Signed-off-by: Joe Atzberger <ohiocore@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
When using auth_by_bind, search was always done as anonymous user.
This is a problem if we want to fetch LDAP values which have ACL
permissions only for users.
This change moves bind from search_method back into checkpw_ldap,
making code cleaner and easier to understand
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Do not misleadingly document or pass an unused second parameter
makes all calls use the single parameter call as the C4
routines already did
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The sample bib label layouts and the hard-coded default
format_string for new layouts used 'callnumber' when they
should have used 'itemcallnumber', preventing call numbers
from being printed on spine labels that use the system-supplied
layouts. Besides correcting the sample data, this patch
now also enshrines 'callnumber' as an alias for 'itemcallnumber'.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
After applying patch it works for new and old layouts (itemcallnumber and callnumber).
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing plan copied from bug:
- Create a new basket for a bookseller
- Create two new order in this basket. The orders must have a price or else
they won't be shown in the "Late orders" report.
- Delete one of the two orders.
- Close the basket
- Check for late orders and use "0 days ago" as a filter date.
- The deleted item appears in the report.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
If you create a list, populate it with titles, and then change the sort to
"year" it will appear as if your list is empty. The SQL in VirtualShelves.pm's
GetShelfContents tries to accept "year" as a sort by but 'year' is not a valid
column name.
The SQL pulls biblioitems.publicationyear. Changing this to
'biblioitems.publicationyear as year,'
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
As far as I can tell, $dbh is never used again in the scope in which it is
created. This patch simply removes the line.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch provides a very partial fix for this bug in that it reduces
the number of pdf generation failures due to a "wide character" error.
It does not ensure that all unicode characters will print correctly as
this is dependent upon many other issues mentioned in this bug and
various posts to the developer list.
What this code does is test to see if the pdf stream is utf8 encoded
and if it is, explicitly declares it to be so. Unicode chars will still
print incorrectly, but the pdf will be created and should open properly
in whatever pdf reader.
You may test this by adding any character with a diacritical to the
title of a bib and then attempting to generate a label pdf with the
title of that bib. Before the patch is applied the resulting pdf
should contain an error mentioning a wide character issue. After the
patch is applied, the pdf should be valid.
No documentation changes are necessary as a result of this patch.
This patch should be backported to 3.2.x.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This squash commit takes the two patches from Srdjan and adds a minor fix to work with
template toolkit variable renames.
Squashed commit of the following:
commit 2cab669d1fd072600942e1e6fbf3378944255a68
Author: Ian Walls <ian.walls@bywatersolutions.com>
Date: Thu Jun 2 14:08:40 2011 -0400
Bug 5929: Fix advanced_notices to use new template-toolkit compatible message names
Uses 'item_due' and 'advance_notice' for advance notices names; letters do not send otherwise
commit caded04702d5eebd0f63a3b93cdddce28257f092
Author: Srdjan Jankovic <srdjan@catalyst.net.nz>
Date: Tue Mar 29 12:38:49 2011 +1300
wr77490 (bug 5929): removed debugging leftover
commit 1944de0de40f937b1d8748500f24a119390db3f0
Author: Srdjan Jankovic <srdjan@catalyst.net.nz>
Date: Tue Mar 22 19:05:23 2011 +1300
wr77490 (bug 5929): use branch email in preference for due notices
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Because C4::Charset directly manipulates the MARC::Record object, bad data has
to be cleaned in ModBiblio before the call into C4::Charset. The corrupted
records can also break the Zebra index. After this fix has been applied, it
would probably be a good idea to run the misc/maintenance/touch_all_biblios.pl
script to ensure that this problem has been cleared up.
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Perl 5.14 will issue warnings in cases where it is assumed that
() will magically appear around qw() as the interpreter
will stop fooling itself that they are there
Added the missing () in the couple of cases they were required
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Trivial fix, now it choose surname if firstname is empty and behaves
like before (firstname.surname) if both are provided.
Signed-off-by: Frederic Demians <frederic@tamil.fr>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Users could log in intranet using their cardnumber, with superlibrarian
rights.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Split NLM call numbers using the same rules as those used for Library of
Congress call numbers.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Remove a 'variable in void context' warning from
C4::Auth which shows up as a compile warning in all users of
the module and generates log noise
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Fixes bug where a bib record imported by bulkmarcimport.pl
could become unindexable by ensuring that ModBiblioMarc()
is always called by bulkmarcimport.pl to finalize saving the
bib record (as it was initially created by AddBiblio with the
defer_marc_save option).
Also introduces a utility routine, C4::Biblio::_strip_item_fields.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Had effect of breaking item record changes when the
CatalogingLog system preference is on.
(Note to people reviewing patches - please do not modify the content
of patches that you are signing off on unless you are *sure* you
know *exactly* what you doing. The process of patch review should
not be introducing yet more bugs.)
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Patch reworked for master using Template::Toolkit.
To+
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
- The following export pages used to embed items when exporting,
this was no longer the case, so they were fixed :
Intranet :
- basket/downloadcart.pl,
- virtualshelves/downloadshelf.pl
- catalogue/export.pl
Opac :
- opac/opac-downloadcart.pl
- opac/opac-downloadshelf.pl
- opac/opac-export.pl
- Notes :
- GetMarcBiblio used to embed items data, this was no longer the case,
so an optional parameter was added to choose if items should be embedded or not.
This way, previous work on this bug is not broken, and this is a pretty usefull
feature, imho.
- An optional parameter has been added to SetUTF8Flag, to be able to use NFD during
normalization. This was required to make Unicode/UTF-8 export work again.
Signed-off-by: Claire Hernandez <claire.hernandez@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Remove the following routines which used to
handle embedding item data in the bibliographic record:
C4::Items::_replace_item_field_in_biblio
C4::Items::_add_item_field_to_biblio
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Claire Hernandez <claire.hernandez@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
* no need to record full bib MARC when logging
change to an item record
* IDEA: set up a separate ItemLog syspref
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Claire Hernandez <claire.hernandez@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds a new routine, C4::Biblio::EmbedItemsInMarcBiblio, to
embed the items in the bib record when necessary:
* cataloging/additem.pl
* rebuild_zebra.pl
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Claire Hernandez <claire.hernandez@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
* when item changes
* when new item is added
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Claire Hernandez <claire.hernandez@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
