This patch adds an option to the koha-conf.xml file for specifying
a temporary uploaded files directory.
The koha-create script is adjusted to handle it and a convenient option
switch is added. If ommited, it will default to
/var/lib/koha/<instance>/uploads_tmp.
koha-create-dirs is patched to create the required directory with the
right permissions.
The docs get the new parameter documented.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a --timezone switch to koha-create so the timezone can
be set on creation time. It defaults to empty (i.e. using the server's
local time).
To test:
- Create an instance:
$ sudo koha-create --create-db timezone1
=> SUCCESS: /etc/koha/sites/timezone1/koha-conf.xml contains an empty
<timezone> entry.
- Apply this patch
- Run:
$ perl misc4dev/cp_debian_files.pl
- Create a new instance:
$ sudo koha-create --create-db timezone2
=> SUCCESS: /etc/koha/sites/timezone2/koha-conf.xml contains an empty
<timezone> entry (i.e. the current behaviour is preserved).
- Create a new instance:
$ sudo koha-create --create-db --timezone Your/Timezone timezone3
=> SUCCESS: /etc/koha/sites/timezone3/koha-conf.xml contains
<timezone>Your/Timezone</timezone> (i.e. introduced behaviour works)
- Sign off :-D
Sponsored-by: ByWater Solutions
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Note that there is no way to create an install without memcached.
As it is now considered as stable, there is no point to not use it.
Test plan:
Create a new Koha install and make sure memcached is enabled by default
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Followed test plan. Patch functions as described and both commands execute.
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This attempts to handle issues arising when running
koha-create on a system that never had MySQL installed.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes all maintenance scripts use **koha-zebra** instead of
the old **koha-*-zebra** scripts.
To test:
- Run:
$ perl misc4dev/cp_debian_files.pl
$ sudo service koha-common stop
=> SUCCESS: No errors and the Zebra-related sevices are stopped
$ sudo service koha-common start
=> SUCCESS: No errors and the Zebra-related services are started
$ sudo service koha-common restart
=> SUCCESS: No erros and Zebra-related services are running
$ sudo koha-create --create-db test
=> SUCCESS: Instance created and zebra running for it
$ sudo koha-disable test
=> SUCCESS: No errors and Zebra is stopped for instance test
$ sudo koha-zebra --start test
$ sudo koha-remove test
=> SUCCESS: No errors, instance removed, no Zebra running for test
- Sign off :-D
Sponsored-by: Orex Digital
Signed-off-by: Hugo Agud hagud@orex.es
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes koha-create (and friends) handle the template_cache_dir
config entry correctly.
It does so by:
- Adding a replaceable string to the template for koha-conf.xml
- Making koha-create-dirs create the needed directories (i.e.
/var/cache/koha/instance and /var/cache/koha/instance/templates)
- Adding a --template-cache-dir switch to koha-create (so sysadmins can
specify their favourite directory for the templates cache).
- koha-remove now takes care of the instance's *templates* dir.
- The install scripts now automatically create /var/cache/koha so it can
be used later by koha-create and friends. It does so the same way it does
for other install-created directories.
To test, you should ideally be able to build your own packages. This
instructions can be followed by people that doesn't have that ability
yet. But can be used on a custom packages setup too.
To test:
- Make sure you have the latest misc4dev in your kohadevbox (if it is a
fresh box you have it already)
- Run:
$ sudo perl misc4dev/cp_debian_files.pl
- Manually create the /var/cache/koha dir (skip if you have your own
packages):
$ sudo mkdir /var/cache/koha
- Create a new instance:
$ sudo koha-create --create-db cachetest
=> SUCCESS:
* /etc/koha/sites/cachetest/koha-conf.xml contains
template_cache_dir and is populated with /var/cache/koha/cachetest/templates
* The directory /var/cache/koha/cachetest/templates exists!
- Create a new instance, pass your own cache dir:
$ sudo koha-create --create-db --template-cache-dir /tmp cachetest2
=> SUCCESS: etc/koha/sites/cachetest2/koha-conf.xml contains template_cache_dir
and is populated with /tmp
- Run:
$ man koha-create
=> SUCCESS: The docs mention the --template-cache-dir option switch
correctly.
- Sign off :-D!
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
my koha-common.cnf is using this form:
[client]
host=db
user=root
password="move_rootpwd_to_dotenv"
this file is working has expected with mysql tools.
but koha-create parsing will not find the db host resulting in
koha-conf.xml containing no values in hostname element.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
TEST PLAN
---------
apply bugs 9409 and 14533 (order is irrelevant)
trigger message about missing database name
-- notice it fails to mention dbhost
apply this patch
trigger message again
-- notice it mentions dbhost
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This allows setting the remote db host correctly for
request-db either with a command-line or passwd file.
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
1. Run: debian/scripts/koha-create --request-db
-> Without patch you see the getent error message
-> With patch you see usage and "Missing instance name" message
Signed-off-by: Dilan Johnpulle <dilan@calyx.net.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
koha-create-defaults substitutes the instance name with the placeholder
__KOHASITE__ in the SQL file that it creates. If the instance name is
something common, like "data", this means that way too many substitutions
will be made, and when koha-create uses the SQL file as a template, broken
data can be the result.
The solution in this patch was suggested by drojf on IRC.
To test:
- Create an instance called "data"
- Run "sudo koha-dump-defaults data > test.sql"
- Take a look at test.sql and verify there are way too many occurences
of __KOHASITE__, like "-- Dumping __KOHASITE__ for table `accountlines`"
- Apply the patch
- Copy the resulting koha-create and koha-dump-defaults to somewhere
running off the packages
- Run "sudo koha-dump-defaults data > test.sql" again and verify there
are only 4 occurrences of __KOHASITE__, in places that make sense
- Create an instance with something like:
$ gzip test.sql
$ sudo koha-create --create-db --defaultsql test.sql.gz test17265
- Verify that you have a working Koha install
Signed-off-by: Andreas Roussos <arouss1980@gmail.com>
Works as expected.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
See the bug description for the details.
Test plan:
Use this script to create a new koha installation, using MariaDB
You should not display
"user koha_kohadev doesn't have enough privilege on database koha_kohadev "
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Confirm that this still works (with MySQL).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Apply patch
2) Create new instance with parameter --zebralang cs
3) Insert some record with basic latin characters and some with "czech" characters (for example: "č" - should be sorted after "c", "š" - should be sorted after "s")
4) Try to search in katalog (staff and opac) and sort by other field then relevance - title or author for instance
5) Records should be sorted correctly by Czech rules
6) Look at code and confirm it is ok
Signed-off-by: radiuscz <radek.siman@centrum.cz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I did not test this patch, but trust in the author and signoffer
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 13799 introduced the api_secret_passphrase on source installs, but missed to do so on packages.
This patch introduces the entry on the template koha-conf-site.xml.in file, and
patches koha-create so it generates a randomized string (64 chars) to put in it.
To test:
- Apply the patch
- Grab the new template file:
$ sudo cp kohaclone/debian/templates/koha-conf-site.xml.in \
/etc/koha
- Create a new instance:
$ kohaclone/debian/scripts/koha-create --create-db blah
=> SUCCESS: The script runs fine, /etc/koha/sites/blah/koha-conf.xml
contains the api_secret_passphrase entry.
- Sign off :-D
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
On Debian Jessie, apt needs to be told it should get the dependencies
for the LE package from backports, or it will error. We check if we are
on Jessie and do that automatically so users don't need to set priorities
manually in apt.
Changed to lsb_release -c -s.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Temporarely set +e so the test for the LE package does not break
koha-create
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes koha-remove take care of
/etc/letsencrypt/renewal/$opacdomain.conf
/var/lib/koha/$site/letsencrypt.enabled
It also adds a few helper functions.
To test
- create a koha instance with LE
- observe you got both files mentioned above
- remove that instance
- verify the files are gone
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Deletes the --staging option of the letsencrypt command to get
real certificates. Rate limits apply.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
New option koha-create --letsencrypt
- installs the letsencrypt package if needed
- creates <instance>
- generates letsencrypt certificates for <instance>
- sets up a https-only website for <instance>
- redirects http to https for <instance>
! you need to enable jessie backports to install letsencrypt: add
deb http://http.debian.net/debian jessie-backports main contrib non-free
to your /etc/apt/sources.list
! this patch uses the letsencrypt staging server
to create real certificates, apply thy "LE production server" patch
Test plan:
- build a debian package with patch applied
- use apache mod_ssl
sudo a2enmod ssl
- make sure the machine is accessible on 80 (needed for letsencrypt) and 443 from the internet
- install koha with your new package
- Put your (existing) domain options in /etc/koha/koha-sites.conf
- use koha-create with the new options:
sudo koha-create --create-db --letsencrypt <instance>
- if you do not have the letsencrypt package installed, you will be prompted to do that
[
if there is no package available, a symlink to the git checkout will work:
on your test server, get letsencrypt via git
git clone https://github.com/letsencrypt/letsencrypt
create a symlink from /usr/bin/letsencrypt to letsencrypt-auto
sudo ln -s /path/to/letsencrypt/letsencrypt-auto /usr/bin/letsencrypt
]
- wait until setup is finished, check that you got a working OPAC and staff client with certificates
- check that http redirects to https
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Run koha-create to create an instance or just fire kohadevbox:ansible
=> FAIL: Notice the instance's koha-conf.xml points to __KOHA_CONF_DIR__
instead of /etc/koha/sites/kohadev/ on the log4perl entry.
=> FAIL: the /etc/koha/sites/kohadev/log4perl.conf contains __LOG_DIR__
instead of /var/log/koha/kohadev/
- Apply this patch and pick the koha-conf-site.xml.in and koha-create files
- Create a new instance
=> SUCCESS: All placeholders are filled correctly.
- Sign off
Regards
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch does:
[1] Resolve error [koha-create: line 294: local: `=upload21': not a valid
identifier] by replacing $instance by instance.
[2] Resolved typo for 'specify'.
[3] Resolve error: [sed: -e expression #26, char 20: unknown option to `s']
by replacing the slash in the sed line by a #. This makes sed not
stumble over the slashes in the upload path.
[4] Added the aspect of permanent storage in the wording (as opposed to
the storage of temporary uploads in /tmp or similar).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified that koha-create now inserts the right path in koha-conf.xml.
Verified that koha-create-dirs created the new uploads directory.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes koha-create and koha-create-dirs aware of the new upload_path
configuration entry.
It defaults to /var/lib/koha/<instance>/uploads as proposed by Robin but lets the
user specify its own directory, using the --upload-path option switch that is
added by this patch.
koha-create-dirs is tweaked so it also creates this new directory.
The docs are updated accordingly.
To test:
- Apply the patch, have a packages setup (either by grabbing the relevant files [1]
or by creating your own package).
- Run koha-create --create-db instance
=> SUCCESS: /var/lib/koha/instance/uploads directory is created
=> SUCCESS: /etc/koha/sites/instance/koha-config.xml has upload_path set correctly
- Create a new instance using the --upload-path making it point to whatever you want
=> SUCCESS: koha-conf.xml points to your chosen path
- Sign off :-D
Regards
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Does not work in its current state. Needs a follow-up.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: upgraded DEBUG level to WARN in config file.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Add greek as lang definition in installer.
Developed in collaboration with Giannis Kourmoulis <ikourmou@lib.auth.gr>
Test plan :
- Install using "gr" in "Primary language for Zebra indexing"
- check gr is used in etc/zebradb/zebra-*.cfg
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds two parameters to the koha-create command:
--enable-sru: makes the koha-create script enabled the SRU server for
the created instance
--sru-port: lets the user specify a desired port for the SRU server
to listen at. It defaults to 7090
To test:
- Apply the patch on top of master
- Build your own package and install / can be tested just using the koha-create
command on a 3.16+ packages install
- Create an instance as usual (i.e. without --enable-sru and --sru-port)
=> SUCCESS: The instance is created, the publicserver sections are
both commented out. The first publicserver section has 7090 set as the
listening port.
- Create an instance as usual, passing --sru-port 456
=> SUCCESS: The instance is created, the port is set but the publicserver sections
are commented out
- Create an instance with --enable-sru (with and without --sru-port)
=> SUCCESS: Verify the instance is created as expected, with the SRU server enabled
(port 7090 if no --sru-port passed, the one we chose otherwise).
- Verify that the docs also talk about this new parameters addition.
- Sign off :-D
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Short:
Launch an indexing daemon (rebuild_zebra.pl -daemon) process for each
enabled instance. Enabling/disabling the use of the indexer is handled
by global configuration variables in /etc/default/koha-common.
Also provides command line tools to manage the running indexer daemons
for your instances.
Long:
Using an indexing daemon avoids launching a new interpreter each time
the cron triggers the indexing, and also allows sub-minute incremental
reindexing, a requirement from our librarians.[1]
Using the indexer daemon could remain "experimental" until it gets more
testing; so is disabled by default initially. To enable the use of the
indexer the user has to tweak the /etc/default/koha-common config file.
Specifically the USE_INDEXER_DAEMON variable, which is clearly explained
in the file.
Frecquency defaults to 5 sec, and can be changed by tweaking the
/etc/default/koha-common config file too.
This patch uses rebuild_zebra.pl in daemon mode, but it is crafted to
allow changing the indexing daemon and passing specific option switches
it might need.
Regards
To+
[1] This is the .deb version of http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=8519
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
As the way we need to reference Apache instance names has now changed
between 2.2 and 2.4, we need to try it out both ways to make sure we get
it right.
This also allows koha-create/koha-disable to try the .conf version of
the name if the first one doesn't work.
To test:
* Create an instance on an Apache 2.2 system with koha < 3.16
* Upgrade to 3.16 with this patch, saying 'yes' to the renaming question
** Make sure you don't see the warning: Warning: problem enabling $site
in Apache
* Do a 'service apache2 restart'
* Make sure you can still access the instance
* Make sure that /etc/apache2/sites-enabled/instance.conf exists as a link
to /etc/apache2/sites-available/instance.conf
* Check that koha-create and koha-remove behave like you'd expect.
Note:
* If you need to make debconf forget that it asked you the question
about renaming so that it'll do it again, then run:
echo "unregister koha-common/rename-apache-vhost-files" | sudo debconf-communicate koha-common
* 'debconf-show koha-common' will show you the current debconf
configuration.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
As asked by Robin, a bash lib of functions is introduced with the common
functions to be reused. Most of the scripts are modified (reduced) to
include this file and the repeated functions cleaned.
No noticeable change in behaviour should be noticed.
As I've been todl in #debian-mentors, it is used that files for inclusion
should be installed at the apps directory (i.e. /usr/share/koha/) so this
patch makes the install script put the file in the bin/ directory.
All koha-* scripts assume the file is there already (and fail otherwise).
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Apache 2.4 expects the sites definition files use the sufix '.conf'
To reproduce:
- Install the 'koha-common' package on Debian 7 or Ubuntu 13.10+
(both known to include Apache 2.4).
- Create an instance (for example testlibrary) using the supplied
commands:
$ koha-create --create-db testlibrary
> FAIL: apache reports an error like this:
"ERROR: Site testlibrary does not exist!"
This patch adds a test on the Apache version and appends the ".conf"
sufix if needed.
To test:
1st step: koha-create gets fixed:
-- The hard way --
- Apply the patch, and build the koha-common package on top of this
commit.
- Install the built package on an Apache 2.4 Debian-based distro (Debian 7
or Ubuntu 13.10 will work)
- Create a test instance:
$ koha-create --create-db testlibrary
> SUCCESS: no more apache sites related error.
-- The easy way --
- Apply the patch, and copy the koha-create into an Apache 2.4
Debian-based distro
- Create a test instance using the koha-create script you just
copied:
$ ./koha-create --create-db testlibrary
> SUCCESS: no more apache sites related error.
2nd step: the rest of the touched scripts keep working as usual
koha-disable
koha-dump
koha-enable
koha-list
koha-remove
koha-restart-zebra
koha-stop-zebra
koha-start-zebra
They should all keep working. Can be tested "the easy way" too.
Note: there might be another issues regarding Apache 2.4 deployments
like the need for
$ a2enmod access_compat
and perhaps some directory permissions tweak, which I think should be
properly documented on the install instructions.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
While adding the --help and -h switches I forgot to change to arguments
count validation so that one can actually use those parameters (i.e.
koha-create should accept being invoked with only one parameter).
This patch just changes the minimum parateres required from 2 to 1.
To reproduce:
- Run 'koha-create --help' from master
=> Usage information is printed BUT ALSO an "Error: wrong parameters"
message
- Apply the patch and
- Run 'koha-create --help'
=> Usage informatio it printed and no error message.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes koha-create print better and more descriptive usage
information. Also adds the --help and -h switches.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Removed trailing " from:
$scriptname [db usage mode] [options] instancename"
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Koha requires mod_rewrite. If it's not enabled in Apache, then
koha-create will now abort with a helpful error message. Also adds a
warning when not run as root to avoid confusing errors.
Test plan:
* apply the patch
* a2dismod rewrite
* run koha-create without sudo, note the error about being root
* run koha-create with sudo, note the error about rewrite
* a2enmod rewrute
* repeat test above, note that it works
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
As configuration variables from koha-sites.conf overwrite the ones in the
koha-create script we need to unset them in case we have USE_MEMCACHED="no".
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes the koha-create script adjust the koha-conf.xml file
with the proper string substitutions to enable the use of memcached
for the created Koha instance.
It adds three option switches that control this:
--use-memcached (defaults to "no")
--memcached-servers "host1:port1,..." (defaults to '127.0.0.1:11211')
--memcached-prefix "desired_namespace prefix" (defaults to 'koha_')
It respects the current schema configuration schema, where configuration
values are pondered like this:
hardcoded < koha-sites.conf < koha-create option switches
koha-sites.conf is read for USE_MEMCACHED, MEMCACHED_SERVERS and
MEMCACHED_PREFIX.
Note: the docs discourage setting user's own namespace prefix.
Using memcached is off as the default. The relevant configuration
variables will remain empty if the user doesn't pass --use-memcached
to the command. It matches the current behaviour.
To test:
- Apply the patch
- Build your own packages and install them on a test server
a) Create a new instance without using the new switches like:
$ koha-create --create-db memctest
- Check that /etc/koha/sites/memctest/koha-conf.xml contains:
* Empty <memcached_servers> tag.
* Empty <memcached_namespace> tag.
b) Play with the possible combination of option switches
(Note that the code defaults to empty and will remain like that if
--use-memcached is not used, so less tests...)
$ koha-create --create-db --use-memcached memctest
$ koha-create --create-db --use-memcached --memcached-servers "anything:xxx" memctest
$ koha-create --create-db --use-memcached --memcached-servers "anything:xxx" --memcached-prefix "something" memctest
$ koha-create --create-db --use-memcached --memcached-prefix "something" memctest
- Check the koha-conf.xml and /etc/apache2/sites-enabled/memctest
file reflect the chosen options.
c) Run
$ koha-create --help
- It should advertise this addition accordingly.
d) Run
$ man koha-create
- Man page for koha-create should provide good information on the new
switches behaviour
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes the koha-create script install the file zebra-biblios-dom.cfg
with the proper string substitutions inside on the new instance koha-conf.xml file.
It also adds two option switches that control the indexing mode for the instance:
--biblio-idx {dom|grs1}
--auth-idx {dom|grs1}
DOM indexing is set as the default for both authorities and bibliographic records.
Following drojf (thanks!) advice I arranged stuff like explained here:
http://wiki.koha-community.org/wiki/Switching_to_dom_indexing
To test:
- Apply the patch
- Build your own packages and install them on a test server
a) Create a new instance without using the new switches like:
$ koha-create --create-db domtest
- Check there's a file /etc/koha/sites/domtest/zebra-biblios-dom.cfg
- Check that /etc/koha/sites/domtest/koha-conf.xml points to:
* zebra-biblios-dom.cfg (biblioserver section)
* zebra-biblios-dom.cfg (publicserver section)
* zebra-authorities-dom.cfg (authorityserver section)
- Success means the new default is DOM
b) Play with the 4 possible combination of option switches
$ koha-create --create-db --auth-idx grs1 --biblio-idx grs1 domtest
$ koha-create --create-db --auth-idx grs1 --biblio-idx dom domtest
$ koha-create --create-db --auth-idx dom --biblio-idx grs1 domtest
$ koha-create --create-db --auth-idx dom --biblio-idx dom domtest
- Check the koha-conf.xml file reflects the chosen options.
c) Run
$ koha-create --help
- It should advertise this addition accordingly.
d) Run
$ man koha-create
- Man page for koha-create should provide good information on the new switches behaviour
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch add the option to choose 'ru' and 'uk' during install for Zebra.
Should work for a tarball install, and make 'ru' and 'uk' available for using
with koha-create too.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Reran Makefile.pl and made sure the language options show up now.
Patch extends existing language code lists addings nb, ru and uk
where missing.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch provides a definition file for Spanish (es) character
sorting in Zebra. It is based on the ideas from Hugo Agud <hagud@orex.es>
and Pablo Bianchi <pablo.bianchi@gmail.com>.
Makefile.PL is fixed to notice the existence of the 'es' language. The
docs for koha-create are touched too.
To test:
Tarball
=======
- Go through the install process, choosing 'es' for the Zebra's language step
- Koha should work as usual.
- Running this should show the lang definition is properly set.
$ grep -R "lang_defs/es" /etc/koha/*
(stuff like zebradb/zebra-biblios-dom.cfg:profilePath:...etc/koha/zebra/lang_defs/es... should show)
- This file should be present:
/etc/koha/zebradb/lang_defs/es/sort-string-utf.chr
Packages
========
- Build your own package, it shouldn't break the packaging
- Try the new package, using koha-create to set an instance using --lang 'es'
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
1) koha-create: fill in __PLUGINS_DIR__
2) koha-create-dirs: create the directory, set permissions (writeable by the koha user)
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This changes the scripts so that:
- in koha-create, the zebra password and mysql passwords are set to 16 character "secure" passwords, ie generated with pwgen -s 16 1
- the patron password is set to a 12 character "memorable" password.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Looks good. I did not actually build, install and test new packages,
but i did test pwgen with the new arguments and the changes make
sense.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
QA signoff
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The newer version of MySQL in Ubuntu 12.04 installs a default
'localhost' user with no username. Due to the way that MySQL looks up
user details when you connect, if you connect from localhost and the
user was only created with a wildcard host (%), the anonymous localhost
user will be found instead. This means that your username is lost for
the connection, and you have no privileges.
This patch creates a second user with a hostname of 'localhost'. This
will not work if your database is on a remote server, but you probably
know what you are doing if that's the case. Patches to determine this
server's name relative to the MySQL server are welcome (or even ideas on
how to do it.)
It also fixes up a couple of other small things:
* make koha-remove stop zebra properly
* stop the warning that the password file is missing on create
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Works as promised.
This commit makes koha-create more flexible by adding a number of command-line
and configuration options.
The biggest change is to add support for pre-determined MySQL credentials using
a file in /etc/koha/passwd (for security reasons, if you use this feature, make
sure the file is not world-readable). The configuration file has the following
format:
instance:user:password:database
The database is optional, but the other two are both required if you want to
specify MySQL credentials. If no credentials are specified for a given instance,
the standard koha_instance username and an auto-generated password are used.
The following additional command line options are now available:
* --use-db - use a pre-existing database, see also --database
* --database - specify the name of the mysql database (still defaults to
koha_instance)
* --passwdfile - specify a custom (Koha) passwd file for MySQL credentials
The following additional variables are now available (for use in
koha-sites.conf or a custom config file):
* OPACPORT (previously added but not documented) - port on which the OPAC
should be served
* OPACPREFIX - prefix for the OPAC's virtual host
* OPACSUFFIX - suffix for the OPAC's virtual host
This commit also adds the --keep-mysql option to koha-remove, which, if
specified, will prevent koha-remove from deleting the database or MySQL user
when removing an instance.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This does two things:
* Allows OPACPORT to be specified to change the default OPAC port,
* removes the port number from the ServerName directive, as it's already
handled by the VirtualHost declaration.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
