Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
I think this was a simple case of Aliesha missing a file when commiting.
So I could proceed with testing I just quickly re-implimented the patron
relationship accessor.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
- Update database and upgrade schema files (if you haven't already).
Restart memcached
- Check your user's permissions and ensure the 'problem_reports'
permission is ticked. Confirm the OPACReportProblem syspref is enabled
- Log into the OPAC and submit a problem report
- Log into the staff client
- You should see a box at the bottom of the main page showing your
pending problem report
- Click the link and confirm it takes you to the new page for managing
problem reports
- Go to Administration
- Confirm you can see a link to 'OPAC problem reports' under the
'Additional parameters' heading
- Click 'OPAC problem reports'
- Confirm your problem report is showing in the table
- Open the OPAC in another tab and submit at least two more problem
reports (so you should have at least three in the table after
refreshing)
- Try the different buttons
- selecting multiple problem reports and using the big 'mark
viewed', 'mark closed', 'mark new' buttons. Confirm there are no
failures and that the number of selected problem reports is correct
- select all, clear all, hide viewed, hide closed, hide new, show
all
- individual 'mark viewed', 'mark closed', 'mark new' buttons for
each problem report. Confirm the status shows and the correct button
is disabled while others are enabled
- Confirm the problem page link works as expected
Sponsored-by: Catalyst IT
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Use the get_effective_email from Koha::Library to get an appropriate
inbound address for the branch as aposed to using branchemail directly.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds support for using the reply-to field added in bug 10269
and drops 'from_address' as it will get defined at a later stage in the
emailing process anyway.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
As the feature is now turned off without KohaAdminEmailAddress, we only
need to check if the email address of the library if defined.
Not that we should not check for $library->branchreplyto or
ReplytoDefault, but only $library->branchemail, as we do everywhere else
(I think)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Cannot remember why exactly, but it seems that we should not use
HTTP_REFERER directly.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We usually do not specify the from_address on enqueuing the notice, but
when sending it (from _send_message_by_email). That way a) the code is
centralized (as we must use $patron->notice_email_address) and b) the
email used is the one that is in the DB when the letter is effectively
sent.
Here I guess you need to give it when the notice is enqueued as you want
to default to the koha admin address.
I do not think it's a good idea, we should not send an email with "from"
if not really sent by the user.
We have the borrowernumber anyway to know who filled the form.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
And make it a timestamp type column
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1) Apply patch, update database, rebuild schema file
2) Restart koha-common and memcached
3) Confirm that your user has an email address.
4) Confirm that your library does NOT have an email address.
5) Confirm that syspref KohaAdminEmailAddress and syspref ReplytoDefault are not filled. Enable the OPACReportProblem syspref.
6) Log into OPAC
7) Click the 'Report a problem' link at the bottom of whatever page
you're on
8) Notice that there is no form is and there is an error message alerting that reports cannot be submitted
9) Add an email address for your library (in either the email field or the replyto field). Refresh the OPAC problem report page. The form should now show, and the recipient field should say 'library'.
10) Complete the form and submit. Check the message_queue in the database and confirm the to_address is correct. Confirm there is a success message.
11) Add an email address for the syspref KohaAdminEmailAddress and refresh the OPAC problem report page again. The recipient field should now be a dropdown. Select the Koha Administrator option.
12) Complete the form and submit. Check the message_queue in the database and confirm the to_address is the value in KohaAdminEmailAddress. Confirm there is a success message.
13) Ensure all details in the message_queue are correct.
14) Log out of the OPAC
15) Click the Report a problem link again and confirm you are forced to log in
Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Adding problem_reports table and OPACReportProblem syspref
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When selecting partners for search during the "Place request with
partner libraries" workflow, there was no indication of which partners
could actually be searched (i.e. are attached to a Z target and enabled
for partner search). We now list them
Signed-off-by: Niamh Walker-Headon <Niamh.Walker-Headon@tudublin.ie>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We now allow for the service to return a name that can be specified in
the plugin config. This patch switches to using that, rather than just
the plugin name defined in the plugin's metadata hashref
Signed-off-by: Niamh Walker-Headon <Niamh.Walker-Headon@tudublin.ie>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The conversion of the metadata into Base64 for passing in the API call
to the plugin API routes was failing if the metadata contained a wide
character, so we now encode it into UTF-8 first
Signed-off-by: Niamh Walker-Headon <Niamh.Walker-Headon@tudublin.ie>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test Koha::Illrequests::Availability
Signed-off-by: Niamh Walker-Headon <Niamh.Walker-Headon@tudublin.ie>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the required infrastructure to enable ILL availability
plugins to intercept the request creation process and, using the
supplied metadata, search for and display possible relevant items from
whichever availability plugins are installed.
Currently three availability plugins exist:
z39.50 - Searches any number of the Koha instance's configured Z targets
https://github.com/PTFS-Europe/koha-plugin-ill-avail-z3950
EDS - Searches the EBSCO Discovery Service
https://github.com/PTFS-Europe/koha-plugin-ill-avail-eds
Unpaywall - Searches the Unpaywall API for possible open access versions
of the requested item
https://github.com/PTFS-Europe/koha-plugin-ill-avail-unpaywall
The Unpaywall plugin is intended to serve as a "reference" plugin as the
API it deals with is extremely simple
Signed-off-by: Niamh Walker-Headon <Niamh.Walker-Headon@tudublin.ie>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the new syspref "ILLCheckAvailability"
Sponsored-by: Public Health England
Signed-off-by: Niamh Walker-Headon <Niamh.Walker-Headon@tudublin.ie>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Now koha-common.postinst has a way to patch log4perl configs on
instances, we should patch the Z3950 responder config accordingly,
before it is backported to 19.11 or the 20.05 release :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
No more wide characters in print when logging to a file with Koha::Logger.
Test with this string
"♯Turpo :"
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch uses Net::Netmask to match IPs from ILS-DI:AuthorizedIPs
against $ENV{REMOTE_USER}. By using Net::Netmask, we can use addresses
in a variety of formats. This includes 127.0.0.1, 192.168.1.0/24,
10.0.0, and so on.
To Test:
1. Apply the patch
2. Empty the 'ILS-DI:AuthorizedIPs' system preference
3. Send a request to '/cgi-bin/koha/ilsdi.pl?service=LookupPatron&id=1&id_type=cardnumber'
3b. Note that the request is successful
4. Set the 'ILS-DI:AuthorizedIPs' system preference to a subnet including
your IP address (e.g. 192.168.1.0/24)
5. Send a request to '/cgi-bin/koha/ilsdi.pl?service=LookupPatron&id=1&id_type=cardnumber'
5b. Note that the request is successful
6. Set the 'ILS-DI:AuthorizedIPs' system preference to a subnet that doesn't include
your IP address (e.g. 1.1.1)
7. Send a request to '/cgi-bin/koha/ilsdi.pl?service=LookupPatron&id=1&id_type=cardnumber'
7b. Note that your request is refused
8. Try a variety of permutations including bad values (e.g. 192.168.1.) or multiple values
(e.g. 10.0.0.0/8,192.168.1.0/24) or multiple values including a mix of good and bad values
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The issue appears to be that the default action is not prevented for middle click because it registers
an 'auxclick' event as opposed to a 'click' event
To test:
1 - Perform a search in staff client
2 - Shift-click and hold on a result
3 - Note a new tab opens
4 - Release the click, no change
5 - Middle click and hold on a result
6 - New tab opens
7 - Release, a second new tab opens
8 - Apply patch
9 - Reload page
10 - Middle click and hold
11 - New tab opens
12 - Release
13 - No new tab
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
admin/add_user_search.pl sets 'patrons_with_acq_perm_only', to only
retrieve patrons with acq (order_manage) permissions.
The original bug was hidden in the existing code, but the behavior was
terrible.
To prevent patrons matching the permissions contrainst to be hidden, we
fetched ALL the patrons from the DB, then filtered them depending on
their permissions. This might have awful performance on DB with lot of
patrons.
So basically with this patch we are adding the pagination back to the
"owner/users for funds" feature, as the permission filtering is now done
at DB level.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We never know, as we insert values direcly to the DB, the cache may not
be correct.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
At the moment noItemTypeImages pref controls staff and OPAC
display. With this patch, there will be a separate OpacNoItemTypes
preference that allows to control display of each separately.
To test:
- Apply patch and run database update
In Administration:
- Search for 'noItemTypes' preferences
- Verify the settings of both prefs match
- Toggle prefs, verify everything works ok
- Go to the item types configuration page
- Try different settings for both prefs:
- Both set to No: Only a message with a link to the prefs should show
- Both set to Yes or either set to Yes: image configuration options
should show
In the OPAC:
- Check the following pages with item-level_itypes = record
- advanced search
- detail page
- place hold page
- Check the following pages with item-level_itypes = item
- result list
- a list (opac-shelves)
- checkouts and overdues tabs in patron account
(Note: this didn't work right before, but will now.)
- reading history in patron account
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Librarians should be able to define what sections in member entryfields in 'Main address',
'Contact' and 'Alternate contact' in member entry form for guarantee's are pre-filled from guarantor's record
The 'Guarantor surname, 'Guarantor first name' and 'relationship' fields
in the 'Contact' section should not be filled from guarantor patron
record as those fields are intended for guarantor's without patron
records in Koha.
Test plan:
1. On an adult patron's record (which has all fields filled out in the
'Main address', 'Contact' (Except for 'Guarantor surname', 'Guarantor
first name', and 'relationship'), 'Alternate address', and 'Alternate contact') select 'Add guarantee'
2. Observe:
* Fields in 'Main address' are all automatically pre-filled
from guarantor record
* Fields in 'Contact' (except 'Guarantor surname', 'Guarantor firstname'
and 'relationship') are all automatically pre-filled from guarantor
record
* Fields in 'Alternate address' (except for Contact note) are pre-filled from guarantor record
* None of the fields in 'Alternate contact' are pre-filled from guarantor
4. Apply patch
5. Run database updates
cd installer/data/mysql
sudo koha-shell <instancename>
./updatedatabase.pl
6. Restart plack:
sudo koha-plack --restart <instancename>
7. Go to Administration > Global system preferences and search for the
new PrefillGuaranteeField system preference
8. Observe this syspref contains checkboxes and the following are
selected by default:
Contact - Primary email
Contact - Primary phone
Main address - Address
Main address - City
Main address - Country
Main address - State
Main address - ZIP/Postal code
Main address - street number
Please note: 'Contact - Guarantor surname', 'Contact - Guarantor first
name', Contact - relationship' are not in PrefillGuaranteeField syspref
as they are for non Koha patrons and so should not be pre-filled from a Koha
patron.
9. Repeat step 1 and observe the following fields are prefilled from guarantor:
In Main address section -
streetnumber
address
city
state
zipcode/postal code
country
In Contact section -
Primary phone
Primary email
10. In the PrefillGuaranteeField syspref click '[Select all]' checkboxes
11. Repeat step 1 and observe all fields in 'Main address', 'Contact'
(except Guarantor surname, Guarantor first name, and relationship),
Alternate address and Alterate contact are filled from guarantor record.
i.e. The values in guarantor's 'Alternate address' fields fill the
guarantee's 'Alternate address' fields
12. Change a few of the prefilled field values and 'Save' and observe your changes
have been saved in addition to the unaltered pre-filled values in other
fields
13. Amend PrefillGuarantee field syspref to have no checkboxes selected
14. Repeat step 1 and observe none of the fields in Main address,
Contact, Alternate address and Alternate contact are pre-filled
15. Run tests:
sudo koha-shell <instancename>
prove xt
prove t
Sponsored-by: Waitaki Distict Council, NZ
Signed-off-by: Sally <sally.healey@cheshiresharedservices.go.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a simple hook to the process_message_queue cronjob
to allow plugins to pre-process messages in the messaging queue before
they are sent.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Same change as in bug 24697 for staff. If there are more URIs in 952u,
we split them and show the real URL instead of Link to resource or the
value of pref URLLinkText.
I introduced a few template variables here to make the code a bit more
compact and readable.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If a hold is selected from the result list, we should let the ability to
select an item-level hold.
Test plan:
I. Detail page
1/ Go to a bibliographic record detail page
2/ Click "Place hold"
3/ Select a patron
=> No change expected, you can select an item
II. Search result, multiple holds
1/ Search for an item with more than one search result
2/ Select several items, click 'Place hold'
3/ Enter a patron card number
=> No change expected, item level holds are not available.
III. Search result, single hold
1/ Search for an item with more than one search result
2/ Select only one item, click 'Place hold'
3/ Enter a patron card number
=> With this patch applied, item level hold is available. The screen is the same
as when you place a hold from the bibliographic record detail page
=> Without this patch you cannot place an item-level hold
QA notes: We could go a bit further and remove the 2 biblionumbers and
biblionumber from hold script, as well as remove the checkMultiHold in
request.tt. We should not have a biblionumbers param that contain a list
of biblionumber separated by '/' but several biblionumber parameters
instead.
QA notes 2: About placerequest.pl, see bug 19618 comment 27.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 24492 was not correctly rebased after bug 23355 and did not account
for a variable name change in the 'add_cashup' action. This patch deals
with that.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When selecting a new hard due date, we should keep the time part of the
original checkouts.
Test plan:
1 - Checkout an item specifying a date due
2 - Checkout an item without specifying a date due
3 - Use Tools->Batch extend due date
4 - Select a hard due date
5 - On the confirmation screen you should see that the time part has
been kept
6 - Confirm
7 - Make sure the correct values hava been inserted in DB
8 - Try now using the other option, give a number of days
9 - Repeat 4-7
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch corrects an error in the structure of the authority editor
template so that repeating subfields do not generate invalid markup. The
correction was found by comparing with addbiblio.tt.
If you are viewing the diff, please note that some minor whitespace
changes have been made.
To reproduce, clone and and populate any repeatable subfield, save, and
open the authority for editing again. The clones subfield will be
formatting incorrectly, showing bullet points on each line.
To test, apply the patch and reload the authority editor showing the
record with the cloned subfield. It should display correctly.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch makes a minor correction to the markup of the OPAC search
results page so that the event handlers attached to the checkboxes work
correctly. The broken markup broke the jQuery selector used to control
the event.
An extra </div> was added by mistake by Bug 14715.
To test, apply the patch and test the process of selecting multiple
titles by checking the checkbox. Doing so should activate the "Place
hold" and "Tag" controls.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Create or have a branch with code CPL
2 - Create two new branches 'ACPL' and 'CPLA'
3 - In branch transfer limits disallow some itype or collection from another branch (FPL) to ACPL and CPLA
4 - Set UseBranchTransferLimits to 'Enforce'
5 - Find a biblio with one item belonging to FPL
6 - On opac, attempt to place a hold
7 - Note that ACPL and CPLA don't show in dropdown, OK
8 - Note that CPL is disabled, NOT OK
9 - Apply patch
10 - Place hold
11 - CPL is now enabled
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
