This patch set replaces and extends Koha's current sound options.
This is implemented be removing the existing sound system, and
re-engineering using a table of selector/sound combinations such that
the highest precedence selector that is found in the DOM will trigger
and audio alert. The existing audio behaviors are implemented as a set
of default audio alerts.
Test Plan:
1) Apply this patch set
2) Run updatedatabase.pl
3) Enable the AudioAlerts system preference
4) Test existing sounds
5) Enter the new alerts editor in the admin section
6) Add a new audo alert with the following selector:
"body:contains('Check in message')",
choose any sound alert you wish, make sure it's not one of the 3
sounds already used! Make this selector precedence 1
4) Browse to the checkins page, you should hear the default sound
5) Attempt to return an invalid barcode, you should hear your custom sound!
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
This has been introduced by bug 14949, recently pushed.
So I don't think we need to update the DB, only devs will face this
problem.
The hardduedate was inserted as 0000-00-00 because was en empty string.
To be inserted as NULL, the value should be undef.
Test plan:
0/ Don't apply this patch
1/ Edit a circ rules and don't fill the hard due date
2/ Look at the DB, the value is 0000-00-00
3/ Apply this patch and confirm that the value is now NULL
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Confirmed
+--------------+----------+-------------+
| categorycode | itemtype | hardduedate |
+--------------+----------+-------------+
| * | * | NULL |
+--------------+----------+-------------+
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds loading of hideinopac and searchgroup
when showing/editing itemtypes
To test:
1) Put some values in ITEMTYPCAT auth value
2) Edit an item type, select a value for
search category & check 'Hide in OPAC'
Save
3) Results do no show on list of item types
4) Edit same item type, values are default/empty
5) Apply the patch
6) Edit again, change again, save
Now values shows in list
7) Edit again, values are now correct
Values were saved on db, but not loaded from it
How this happen?
Side note: searching for searchcategory I found
installer/data/mysql/kohastructure.sql: searchcategory varchar(80) default NULL, -- Group this item type with others w
installer/data/mysql/updatedatabase.pl: ADD searchcategory VARCHAR(20) DEFAULT NULL
Its varchar(80) in kohastructure and varchar(20) in updatedatabase
We need more eyes :)
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
- Avoid 1 call to dt_from_string in some cases
- Do not use $_
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Go to Home > Acquisitions, search for an active vendor and view the vendor
- Click on 'Contracts' at the left
(admin/aqcontract.pl)
- Create and edit contracts and verify that it works OK.
(Note: there is no help for this page, see Bug 14929)
Amended for comment #7 25.10.2015 / mv
Signed-off-by: Jesse Weaver <pianohacker@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes C4::Dates from:
- admin/aqbudgets.pl
- admin/aqplan.pl
- admin/aqcontract.pl
To test:
- Apply patch
- Go to Home > Adminstration > Budgets > All funds
(admin/aqbudgets.pl)
- Verify that everything displays as before
- Edit one of the funds and click on 'Planning - Plan by months'
(admin/aqplan.pl)
- Verify that planning works as before
- Go to Home > Acquisitions, search for an active vendor and view the vendor
- Click on 'Contracts' at the left
(admin/aqcontract.pl)
- Create and edit contracts and verify that it works OK.
(Note: there is no help for this page, see Bug 14929)
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. Tested with dateformat syspref
Dates in planning by months not needed to be on iso format, aqplan.pl
uses instead Date::Calc
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1/ update the Schema (misc/devel/update_dbix_class_files.pl)
2/ Translate templates for some languages (es-DE, de-DE for instance)
3/ Enable them in the pref (search for 'lang') for the staff interface
4/ Go on the item type admin page (admin/itemtypes.pl)
5/ Edit one
6/ Click on the 'translate for other languages' link
7/ You are now on the interface to translate the item type's description
in the languages you want. So translate some :)
8/ Go back on the item type list view (admin/itemtypes.pl)
9/ You should see the original description (non translated)
10/ Switch the language
11/ You should see the translated description in the correct language.
If the description is non translated, the original description is
displayed.
12/ On the different page where the item type is displayed, confirm that
the translated description appears.
Think further / Todo:
1/ Update all occurrences of the item type's description (DONE)
2/ Implement for authorised values
3/ Implement for syspref value (at least textarea)
4/ Implement for branch names
5/ Centralize all the translation on a single page in the admin area
...
N/ Implement a webservice to centralize all the translations and give
the ability to sync the item types/authorised values description with
the rest of the world (push and pull).
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes a remaining C4::Dates from admin/categroie.pl and fixes
the display of "Enrollment period" on the confirmation screen for deleting.
To verify and test pls. refer to comments #5 and #6
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes the regresseion as described in comment #3
To test:
- Go on smart-rules.pl and edit a line. Do not define a Hard due date, save.
The value is "None defined".
- Edit the line, do not change anything and save.
The value should be "None defined"
- Edit the line, define a hard due date, save.
The date should display as expected.
- Edit the line agein, remove the hard due date, save.
The value should be "None defined"
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug to remove C4::Dates from
- admin/smart-rules.pl
- admin/categorie.pl
To test:
- Apply patch
- Go to Home > Administration > Circulation and fine rules (smart-rules.pl)
- Edit or add a rule
- Verify that 'Hard due date' displays and saves fine
- Go to Home > Administration > Patron categories
- Edit or add a category
- Verify that 'Until date' displays and saves fine
Note: The date picker does not warn about wrong date formats as e.g. while
editing patrons, but that is not in the scope of this bug
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Right now, Koha only charges fines at the end of a given charge period.
For example, let us assume a circulation rule has a charge period of one
week ( 7 days ) and a fine of $5. This means that an item can be overdue
for 6 days without accruing a fine. Koha should allow circulation rules
to be configured to place the charge at the start of the end of the
charge period so the library can decide when the fine should accrue.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) prove t/db_dependent/Circulation_Issuingrule.t
4) prove t/db_dependent/Circulation.t
5) prove t/db_dependent/Fines.t
6) Ensure you can still create/edit circulation rules
Edit: I removed the DBIx changes after a couple minutes fighting with them.
Will regenerate as usual in a RM followup / Tomas
Signed-off-by: Daniel Grobani <dgrobani@samuelmerritt.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
- "Item" and not "Document" is the word used throughout Koha.
- Moved the updates to an atomic update
- changed searchcategory from varchar(20) to (80)
- cleanup
This allows to group certain item types in a category, to be displayed (and searched) as such in OPAC's advanced search. For example, you can group Reserve 2h and Reserve 12h into a Reserve category. The 2 and 12h types won't appear anymore.
This also allows to simply prevent an item type from displaying as a search option.
TEST PLAN
------------------
0) Back up database, so you can reset and retest easily. ;)
1) Apply the patch
2) Run Koha QA tool.
3) prove -v t/db_dependent/Koha.t
-- all tests should pass.
4) run ./installer/data/mysql/updatedatabase.pl to add the
two columns to itemtypes
-- Does a meaningful message get printed?
Are the columns added?
"DESCRIBE itemtypes;" should list hideinopac and searchcategory.
5) You need to add a category to group your item types:
a) In Intranet/Koha Admin/Authorized values,
select DOCTYPECAT in the 'Show category:' dropdown
i) If you do not have a DOCTYPECAT category, create one.
b) Click button "New authorized value for DOCTYPECAT"
c) Enter
Authorized value: HARDWARE
Description : Hardware
Description (OPAC): Hardware
6) Group your items under that new category
a) In Intranet/Koha Admin/Item types, choose (at least)
two item types and for each:
- Click action/Edit on the right column
- Third row (below Description) is the Search category list box, select Hardware
- click Save changes at the bottom
7) Select at least one item to be hidden in the OPAC search
a) In Intranet/Koha Admin/Item types (again), choose a different item type:
- Click action/Edit
- Click the checkbox "Hide in OPAC" below the list of icons.
8) Go test your modifications
a) Go to OPAC/Adv search.
b) Validate that all items modified above (hidden or grouped) do not appear in Item type list
c) Validate that new item type Hardware does appear instead.
d) Select item Hardware, start Search.
) Validate returned items are the of the two types that were grouped into the Hardware category in step 4.
Sponsored-by: Vanier college
Signed-off-by: Nick <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Now we have packages, we need use them in the pl script.
Test plan:
Verify there are no regression on addind/editing/deleting authorised
values.
Done forget to test the branch limitation.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 9481 added the "Fine" columns to the checkouts table and bug 13492
added the columns settings to these table.
They overlapped each others in the bugs queue.
Test plan:
Confirm that you are able to hide/show the "Fine" columns on both
checkouts table.
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the new fields maxonsiteissueqty as a copy of the
existing maxissueqty field.
There is no brainy code here, it only adds the ability to fill the new
field from the admin interface (admin/smart-rules.pl).
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Add/edit/remove cities from the administration module
(admin/cities.pl).
You should get message feedback after each action.
Tested both patches together, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Per a conversation with Jonathan Druart, add all columns that could be
reasonably mapped, and order them the same as in kohastructure.sql.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch adds the table of items on additem.pl to the columns
customizer.
Test plan:
1. Open item editor on a record, and verify that all columns are visible.
2. Apply patch.
3. Reload editor, and verify that column visibility hasn't changed.
4. Open "Hide/show columns," and verify that you can add and remove
columns.
5. Change the visibility and togglability of some columns in
columns_settings.pl, and verify that these correctly apply to
additem.pl.
NOTE: The columns that are configurable are selected from the non-hidden
columns that have mappings to MARC subfields in the default MARC21
framework (and can thus be displayed in the item editor).
Signed-off-by: Jenny Schmidt <jschmidt@switchinc.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
A patch from bug 11714 removes 'budget_name_indent', which was useless.
The script and the template should use the budget_name value.
Note that this patch impacts the CSV export, which does not work, so it cannot be
tested.
Test plan:
Edit a fund and click on one of the Planning value (by months, etc.)
The "Fund name" column should be correctly populated with the fund
names.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
On creating an item type, if it already exists, it will replace the
existing one.
This patch prevent that and display a message to the interface.
Note: The fields are lost.
Test plan:
1/ Create an item type 'AAA', description 'AAA'
2/ Edit it, update the description with 'BBB'
3/ Create an item type 'AAA' with a description 'CCC' => you should get
a warning "already exists".
Works well, no errors
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Warning message is triggered.
Adding, editing and deleting item types still works.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the ability to use a WYSIWYG editor for system preferences.
The key files that I touch are:
1) admin/systempreferences.pl
2) koha-tmpl/intranet-tmpl/prog/en/modules/admin/preferences.tt
3) koha-tmpl/intranet-tmpl/prog/en/modules/admin/systempreferences.tt
I also add:
4) koha-tmpl/intranet-tmpl/prog/en/includes/wysiwyg-systempreferences.inc
and
5) koha-tmpl/intranet-tmpl/lib/tiny_mce/plugins/advimage
This plugin is part of the TinyMCE distribution. It used to be in Koha, but
then someone removed it. It's useful for preferences like "opacheader" though.
*If you're using anything except IE, this should work super well. If
you're using IE, it'll probably only work for keyboard input and dragging
text within the editor box but not from outside of it. IE has worse
security, so you can probably paste using the context menu paste.
*While I think a WYSIWYG editor can be useful, there might be times
where the content is displayed differently than it is in the editor
because of higher level CSS and Javascript.
Signed-off-by: Martin Persson <xarragon@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch make inactive vendors really inactive.
That means an inactive vendor would not be able to add a basket / add an order.
Revised test plan
=================
1/ In the acquisition module create 2 vendors: 1 active and 1 inactive.
2/ On the acqui/booksellers.pl, acqui/uncertainprice.pl,
admin/aqcontract.pl and acqui/supplier.pl (pages which include the
acq toolbar), you should be able to, for both the 'active' as well
as the inactive vendor :
(a) add new basket
(b) add order items to the basket
Remark: This is *wrong*. You should be able to do so only for active
vendor.
3/ Apply the patch
4/ Go to the links in step #2 above and select the inactive vendor
you should no longer be able to:
(a) add new basket
(b) add order items to the basket
Remark: This is the *correct* behaviour
5/ No change should be noted for vendor marked "active", and should
be able to undertake operations 4 (a), 4 (b) and 4 (c).
Remark: This is the *correct* behaviour.
6/ run koha qa tests tool
Bug 12054: (follow-up) Inactive vendors should be inactive
Don't display "add order""block and buttons if the vendor is inactive.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch fixes a SQL injection vulnerability in the local use
system preferences.
_TEST PLAN_
Before applying:
1) Go to Global System Preferences
2) Click on the "Local use" tab
3) Add a new preference with the value "') or '1' = '1' -- "
(be sure to include the space at the end after the comment --).
4) When the page refreshes, you should now see about 99 other system
preferences which shouldn't be showing up.
5) Apply the patch
6) Refresh the page
7) Note that you now only see a system preference for "') or '1' = '1' -- "
and the other actual local use system preferences.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Happily this was only used for intranetdir.
It's time to remove it and replace existing calls.
I used the following commands to catch calls to C4::Context:
git grep 'C4::Context\->' | grep -v 'C4::Context->preference' | grep -v
'C4::Context->config' | grep -v 'C4::Context->userenv' | grep -v
'C4::Context->IsSuperLibrarian' | grep -v 'C4::Context->dbh' | grep -v
'C4::Context->set_preference' | grep -v '_syspref_cache' | grep -v
_userenv | grep -v 'C4::Context->interface' | grep -v
'C4::Context->Zconn' | grep -v 'C4::Context->queryparser' | grep -v
'C4::Context->tz' | grep -v 'C4::Context->boolean_preference' | grep -v
'C4::Context->memcached'
NOTE: I applied 14428, and then did what I suggested in comment #2.
Only intranetdir references appeared.
I applied this patch, and repeated.
Nothing appeared. This means the autoload references are
properly removed.
koha qa test tools complained about whitespace, I just fixed
those. Though, we may wish to perltidy
auth_fields_substructure.pl on another bug.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Jonathan Druart agreed that C4::Input is vestigial code that should be removed.
Here is how I checked. First I found where C4::Input was used. Then, I checked
what functions are in the package: just checkdigit. Then, I confirmed that
checkdigit is not used at all in any acquisition, administration, or member
related perl scripts. Lastly, I took a look at our supposed test file for the
package. It was painfully sparse.
As such, this patch removes the test file and the package file, and removes
C4::Input references from these six files:
- acqui/addorderiso2709.pl
- acqui/basketgroup.pl
- acqui/neworderempty.pl
- acqui/uncertainprice.pl
- admin/aqplan.pl
- members/memberentry.pl
NOTE: neworderempty had 3 lines of it?! Didn't anyone see that?!
Here is the output of what I did to confirm this correction:
mtompset@debian:~/kohaclone$ git reset --hard origin/master
HEAD is now at 6e9086f Bug 3206: (QA followup) missing comma on sysprefs.sql
mtompset@debian:~/kohaclone$ git grep C4::Input
C4/Input.pm:package C4::Input; #assumes C4/Input
C4/Input.pm:C4::Input - Miscellaneous sanity checks
C4/Input.pm: use C4::Input;
acqui/addorderiso2709.pl:use C4::Input;
acqui/basketgroup.pl:use C4::Input;
acqui/neworderempty.pl:use C4::Input;
acqui/neworderempty.pl:use C4::Input;
acqui/neworderempty.pl:use C4::Input;
acqui/uncertainprice.pl:use C4::Input;
admin/aqplan.pl:use C4::Input;
members/memberentry.pl:use C4::Input;
t/Input.t: use_ok('C4::Input');
mtompset@debian:~/kohaclone$ grep sub C4/Input.pm
sub checkdigit ($;$) {
my $temp2 = substr($infl,$i,1);
if ($rem eq substr($infl,8,1)) {
} # sub checkdigit
mtompset@debian:~/kohaclone$ grep checkdigit `find acqui -type f`
mtompset@debian:~/kohaclone$ grep checkdigit `find admin -type f`
mtompset@debian:~/kohaclone$ grep checkdigit `find members -type f`
mtompset@debian:~/kohaclone$ cat t/Input.t
use strict;
use warnings;
use Test::More tests => 1;
BEGIN {
use_ok('C4::Input');
}
Apply this patch, and the output of git grep C4::Input will be empty.
Run koha qa test tools (kind of overkill)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The category type was always set to 'searchdomain', because it's the
first of the dropdown list.
Test plan:
1/ Create or edit a library group
2/ Set the category type to "properties"
3/ Edit it again
4/ Confirm "properties" is correctly selected
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Most of them were found and fixed using codespell.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The problem with the odd number of hashes happens when not everything is selected.
The grep returns undef, because it isn't found in @values.
By turning the grep into a ternary-operator truth value, we can set a value (1 or 0) expressly.
The next problem is when nothing is selected in these multiple lists, $value is
undefined, so you can't split it. By splitting the definition of @values from
the actual splitting, we can split only if $value is defined, thus eliminating the
warning message.
TEST PLAN
---------
1) back up your koha error log file
2) blank your koha error log file
3) log in to the staff client
4) Home -> Koha administration -> Global system preferences
5) Click on every tab, EXCEPT local use.
6) notice the koha error log file has warnings.
7) blank the koha error log file again
8) apply this patch
9) Click on every tab, EXCEPT local use, again.
10) notice the koha error log file has no warnings.
11) koha qa test tools.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
I like more this version
Works as described
No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
To reproduce: go on the OPAC tab, OpacAdvSearchMoreOptions or
OpacAdvSearchOptions should not have all options selected.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The default authority type cannot be defined.
The authtypecode is en empty string and the tests should be done on
"defined", not "exist".
Test plan:
Edit the default authority type, save it.
Note: There is no way to create an authority with an empty string, with
you deleted you won't be able to recreate it.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The code was just badly placed.
It should be executed on update but also on insert.
Test plan:
1/ Create a new patron category and select 1+ branch limitations
2/ Confirm it's correctly saved
3/ Edit it and change the branch limitations
4/ Confirm it's correctly saved
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Not a C4 or Koha library, so tests not required. Though,
this code could be cleaned up and have the DB stuff put
into some sort of library with tests to prevent regression.
However, that dream is beyond the scope of this bug.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes the home made pagination and introduces datatables on
this page.
Test plan:
Go to the authority type admin page and confirm there is a beautiful
table.
Confirmed...
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On the marc framework page, the checkbox to display only used
tags/subfields is always unchecked.
It should be stored into a cookie to always display the same view.
Test plan:
1/ Go on the marc framework page
2/ Check the checkbox
3/ Go somewhere else on the staff interface
4/ Back to the marc framework page, the checkbox should be checked
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Works as advertised, getting datatables error when using feature
but the error exists pre-patch
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
1/ Verify that the location column is correctly displayed on the
checkouts tables (circ/circulation.pl and members/moremember.pl).
2/ Verify that you can hide/show this column (using the admin page
and/or the ColVis DT plugin).
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
1/ Verify that you can show/hide columns on the checkouts table (moremember.pl).
2/ Play with the column configuration admin page (admin/columns_settings.pl),
and confirm the behavior is correct (depends on what you have selected).
Amended patch: replace 'un' and 'deux' with 'sort_order' and
'todays_or_previous_checkouts' in the yml file.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
1/ Verify that you can show/hide columns on the checkouts table (circulation.pl).
2/ Play with the column configuration admin page (admin/columns_settings.pl),
and confirm the behavior is correct (depends on what you have selected).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It's possible to search prefs using a regex.
But it the regex is not correctly written, the app explodes.
We should provide a fallback.
Test plan:
0/ Does not apply the patch
1/ Search for sysprefs with "notes.*", note the number of results
2/ Search for *notes*, boom
3/ Apply the patch
4/ Repeat 1 and confirm you get the same number of results
5/ Repeat 2 and confirm you don't get the error anymore
NOTE: As noted on comment #4, the kaboom is because of the
leading * and not the following *, because 's*' is a valid
regular expression, while '*n' is not.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The EXAMPLE.pl plugin remains on the source tree for documentation
purposes only, and shouldn't be listed when editing both biblio and
authority cataloguing frameworks.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes the regressions introduced by the previous patches.
If you have tested all in once, you didn't see them.
It introduces library, category and "first letter" filters.
Test plan:
1/ On all pages impacted by previous patches + new order empty (link patron to
an order) + guarantor search
2/ Add / Select patron to the list
3/ Use the filters
4/ Confirm there is no regression
Tested together with other patches.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This second patch removes the previous way to search for serial recipients.
Test plan:
1/ Edit the routing list for a subscription (serials/routing.pl?subscriptionid=X)
2/ Add 1+ recipients
3/ Confirm there is no regression on the add/delete/search actions
QA note: This search does not use a clean way to interact with the
window opener. Indeed the opener is reloaded to display the new item.
This patch does not change this behavior, but note the trick in the
template (common/patron_search.tt) to wait for the opener in order not
to get a JS error.
This is also used by the next patch (patron card).
Tested together with other patches.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This first patch remove the previous way to search for users to link to
budgets.
Test plan:
1/ Edit or create a fund
2/ Edit the owner of this fund a select a patron
3/ Add 1+ users to the user lists of this fund
Tested together with other patches.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the ability to hide columns on the orders search page
(acqui/histsearch.pl).
Test plan:
Go on the orders search page and confirm you are able to hide columns.
You can also play with the columns configuration admin page and confirm
that the behaviors are consistent.
Signed-off-by: Nicole <nicole@bywatersolutions.com>
http://bugs.koha-community.org/show_bug.cgi?id=13685
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the ability to hide columns on the patrons search page
(acqui/lateorders.pl).
Test plan:
Go on the patrons search page and confirm you are able to hide columns.
You can also play with the columns configuration admin page and confirm
that the behaviors are consistent.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Works as expected
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Small rebase was needed.
This enhancement adds new column to display the call number on the
items lost report.
On the way, DataTables and ColVis are added on the table.
Test plan:
1/ Go on the items lost report (reports/itemslost.pl) and verify that the
call number column is correctly filled.
2/ On the way, verify that the 'Library' and 'Current location' now contain
the name instead of the code.
3/ Go on the columns configuration in the admin module
(admin/columns_settings.pl), play with the ColVis plugin and confirm
that all works correctly.
Signed-off-by: David Roberts <david.roberts@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This is a bug fix for bug the columns configuration feature, and
specialy for bug 13864.
Test plan:
Apply patches on bug 13864 and save columns for the late orders (in the
columns configuration admin page).
Confirm that they are correctly saved.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
works as expected
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the ability to hide columns on the late orders page
(acqui/lateorders.pl).
Test plan:
Go on the late orders page and confirm you are able to hide columns.
You can also play with the columns configuration admin page and confirm
that the behaviors are consistent.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
http://bugs.koha-community.org/show_bug.cgi?id=13875
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The funds search does not work at all.
On the budget and the budget plan page, the library dropdown list is
empty.
Test plan:
On the budget, the budget plan and the fund pages, confirm that you are
able to search a fund by code (or name) and the library dropdown list is
correctly filled.
Tested with several combinations. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Tested various combinations, no problems found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
+ wording changes.
How I tested:
- edit an existing patron category
- save the change
- redirect is to the categories table - it shows all categories OK
- wording OK as well
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There are no messages on adding and deleting patron category.
If an error occurs and the data is not inserted, the interface does not
alert the user.
This patch adds a message block to alert the user if something wrong
happened.
Test plan:
1/ Create a patron category PATCAT. You should get a confirmation
message.
2/ Try to create another patron category with the same code. You should
get an error message
3/ Delete the patron category PATCAT. You should get a confirmation
message.
Confirm there is no regression on this form (try update an existing
patron category too).
Followed test plan, works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
C4::Reserves:
* Added OnShelfHoldsAllowed() to check issuingrules
* Added OPACItemHoldsAllowed() to check issuingrules
* IsAvailableForItemLevelRequest() changed interface, now takes
$item_record,$borrower_record; calls OnShelfHoldsAllowed()
opac/opac-reserve.pl and opac/opac-search.pl:
* rewrote hold allowed rule to use OPACItemHoldsAllowed()
* also use OnShelfHoldsAllowed() through
* IsAvailableForItemLevelRequest()
templates:
* Removed AllowOnShelfHolds and OPACItemHolds global flags, they now
only have meaning per item type
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
I have tested this patch left, right and upside down for the last
several months. All tests have passed.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a sort of branches alphabetically by name in authorised values administration, like in many other pages.
Also replaces var $branch (too ambigus) by $branchcode.
Test plan :
- Create 2 branches : code=AAA,name=Zbranch and code=ZZZ,name=Abranch
- Create a new authorized value : admin/authorised_values.pl
- Look at "Libraries limitation" :
=> Without patch branches are sorted by code : Zbranch then Abranch
=> Without patch branches are sorted by name : Abranch then Zbranch
- Select a branch and save
- Re-edit
=> Check the same branch is selected
Followed test plan. Patch behaves as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12979 refactored the way to display prices.
The price format configuration was duplicated everywhere it was used.
All calls looks good except the one in admin/aqbudgetperiods.pl
In this one, the prices are formatted for an edition field (input).
This means the input is incorrectly filled even if the user does not
update the field.
At the end, maybe should we manage formatted prices everywhere, even in
inputs, but it's not in the scope of this bug.
Technically, a new subroutine format_for_editing is added to the
Koha::Number::Price module.
It should be called everywhere a price is displayed in an input field.
At the moment, it only does a sprintf("%.2f"), but it is a first step to
let the number of decimals to display configurable.
To test:
1/ Verify the issue described is fixed (editing a budget with a total
amount > 1000 (With CurrencyFormat is US or FR).
2/ Verify you can edit a fund with a total amount > 1000
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The interface should prevent to delete funds with children.
Otherwise the relationship is broken and problems occur:
1/ You don't see the orphan fund in the fund list
2/ You cannot edit the orphan fund amount ('Fund amount exceeds parent
allocation').
This patch:
- adds a JS check, template side
- adds a check in the perl script (should never be true)
- adds an updatedatabase check, in order to alert users with inconsistent data.
Test plan:
Verify you are not allow to delete a fund with children.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Prior to perl 5.12 keys can only operate on a hash.
Test plan:
With perl 5.10, access to admin/auth_subfields_structure.pl.
Without this patch, you get:
Type of arg 1 to keys must be hash (not subroutine entry) at
/home/koha/src/admin/auth_subfields_structure.pl line 102, near
"getauthtypes)"
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed problem and tested patch on a sandbox, signed off locally.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This reverts commit 2fa2480447.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Conflicts:
admin/preferences.pl
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
http://bugs.koha-community.org/show_bug.cgi?id=11944
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
There is no need to encode strings coming from DB.
To reproduce:
go on admin/item_circulation_alerts.pl
The headers contain bad encoded characters.
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch replaces occurrences of META HTTP-EQUIV=Refresh with a
redirection.
Note:
The list of modified files has been got with the following grep:
git grep Content-Type | grep -v -i utf | grep Refresh | grep -v translator | grep -v \.js
Test plan:
1) admin/auth_tag_structure.pl
- Go on an authority MARC framework for an authority type
(admin/auth_tag_structure.pl?authtypecode=CO for instance)
- Click on the "Add a new tag" button
- Fill fields
- Save
- You should be redirected on the auth_tag_structure.pl page
- Try to modify an existing tag
- The redirection should be done
2) admin/auth_subfields_structure.pl
- From the previous page, click on a "subfields" link
- Edit/Add a new subfields
- Save
- You should be redirected to the subfield list
- Delete a subfield
- You should be redirected to the subfield list
3) admin/authorised_values.pl
- Add/Edit an authorised value
- Save
- You should be redirected to the authorised value list (with the
right category selected)
4) admin/categorie.pl
- Add/Edit a patron category
- Save
- You should be redirected to the category list
- Delete a patron category
- You should be redirected to the category list
5) admin/koha2marclinks.pl
- Go on the Koha to MARC mapping configuration page
- Edit a field
- Map a field and click on "OK"
- You should be redirected to the list
6) admin/marc_subfields_structure.pl
- Go on the MARC frameworks page
- Click on "MARC structure" for one on the list
- Click on "Subfields" for one on the list
- Add/Edit a subfield
- Save
- You should be redirected to the subfield list
7) admin/systempreferences.pl
- Go on the system preferences admin page
- Click on the "Local use" tab
- Add/Edit a pref
- Save
- You shold be redirected to the Local use preference list
8) serials/subscription-detail.pl
- Go on a subscription detail page
- Delete the subscription (using Edit > Delete subscription)
- You should be redirected on the serials home page
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Before this patch, string for yaml files used in preferences.pl were
broken.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The C4::Acquisition module should be exploded in order to add
readability and maintainability to this part of the code.
This patch is a POC, it introduces a new Koha::Acquisition::Bookseller module and put in
it the code from GetBookSeller and GetBookSellerFromId.
Test plan:
1/ Create a bookseller, modify it.
2/ Add contacts for this bookseller
3/ Create an order, receive it, transfer it
4/ Launch the prove command on all unit tests modified by this patch and
verify that all pass.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes a bug on the system preferences tab templates.
To test:
To reproduce:
(1)
- Choose a tab on the sysprefs section (for example 'Enhanced Content')
- Right click on 'Enhanced Content preferences' title, and choose to 'inspect' the code
=> FAIL: you will see below the form tag something like:
<input type="hidden" name="op" value="save">
<input type="hidden" name="tab" value="">
(2)
- Do a syspref search (for example 'facet').
- Right click on one of the category titles (for example 'OPAC preferences')
=> FAIL: you will see below the form tag something like:
<input type="hidden" name="op" value="save">
<input type="hidden" name="tab" value="HASH(0x6e53050)">
- Apply the patch
- Repeat (1) and (2)
=> SUCCESS: you will see below the form tag something like:
<input type="hidden" name="tab" value="enhanced_content">
and
<input type="hidden" name="tab" value="opac">
respectively.
- Sign off :-D
Regards
Signed-off-by: wajasu <matted@34813.mypacks.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The prefs language and opaclanguages used the comma to separate the
different values.
The new prefs OpacAdvSearchMoreOptions and OpacAdvSearchOptions should
do the same.
To reproduce the issue: update the language pref (or opaclanguages) and
refresh the page.
=> The pref values are not checked anymore and the language selection
(bottom of the page) does not appear.
Test plan:
1/ Verify that the behavior described above is fixed.
2/ Verify that the original test plan of bug 9043 still passes.
Note: The 2 OpacAdvSearchMoreOptions and OpacAdvSearchOptions pref
values are overwritten but the feature have just been pushed recently.
It should not affect a production environment.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I was able to reproduce the issue and verify that this patch corrected
the problem. Langage selection and OpacAdvSearchOptions worked
correctly.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a new type "multiple" for syspref.
This new type allows to select several values for one syspref.
Signed-off-by: Koha Team Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There are some places where the price format is defined.
All these occurrences should be removed use the way introduced by bug
12844.
Test plan:
1/ Verify you don't see any price formatting change on the basketgroup pdf
(for layout2pages, payout2pagesde, layout3pages and layout3pagesfr).
2/ On admin/aqbudgetperiods.pl, the budget total should be unchanged
too.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Item search is available at catalogue/itemsearch.pl (link is in
catalogue/search.pl)
It only uses SQL (not Zebra)
* Use DataTables and server-side processing to be able to filter on
individual columns after the first search is done.
* Allow to export results in CSV
* With Javascript disabled, search form still works (and CSV export too)
There is the possibility to define "Custom search fields" in a new admin
page admin/items_search_fields.pl (link is in admin/admin-home.pl)
A custom item search field is defined by:
* a name: its unique identifier
* a label: the text displayed to the user
* a MARC field/subfield: the field/subfield to query (it uses
ExtractValue)
* an authorised values list (optional): if defined the list is displayed
in the search form
New Perl dependency: Template::Plugin::JSON::Escape
Test plan:
1/ Apply the patch and run updatedatabase.pl
2/ Go to advanced search (staff interface), then click on "Go to item
search"
3/ Play with the search form! :)
In the 3rd fieldset you can add as many fields as you want and combine them with
boolean operators (AND, OR). You can use SQL jokers characters (%, _)
You can output to screen (in a DataTables table) or to a CSV file.
4/ In the DataTables table, play with filters and try sorting columns.
5/ Disable Javascript (with Firefox: extensions NoScript or YesScript,
or in about:config 'javascript.enabled' = false
6/ Reload the search page and do some searches on screen output. (there
is no sorting or filtering features, but there is still pagination)
7/ Try again CSV output.
8/ You can re-enable Javascript.
9/ Go to Administration > Items search fields
10/ Add a new field. Example for title (in UNIMARC):
Name: title
Label: Title
MARC field: 200
MARC subfield: a
Authorised values category: None
(add another field with an authorised values category to see the
difference).
11/ As you are there try to update and delete some fields.
12/ Go back to items search form. You can see in the 3rd fieldset that
your fields have appeared in the selects.
13/ Try searching on them.
14/ I think you're done :)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. Good new option.
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The method C4::Budgets::GetBudgetHierarchy() retreives from database budgets in an array containing a tree of budgets (parent -> children -> children, ...).
The code generating this tree with the SQL results needs optimization because when a lot of budgets exists, it can run during several minutes.
This patch rewites the code using a recurive method.
Test plan :
- Create a active budget "MyBudget" with 1000
- Click "Add found" on this budget
- Create a found "Parent" with 1000, set you has owner
- Click "Add child found" on found "Parent"
- Create a found "Child" with 100, set you has owner
- Click "Add child found" on found "Child"
- Create a found "Grand-child" with 10, set you has owner
|
- Create a new acquisition basket
- Add a new order with "Child budget"
- Select "Child" found and set all costs to 2
- Save order
- Add a new order with "Grand-Child budget"
- Select "Child" found and set all costs to 2
- Save order
- Close basket
- Perform the receive of the two orders
|
- Go to founds of "MyBudget"
=> You see a table with 3 founds
- in "Fund filters", select no library and uncheck "Show my funds only" and click on "Go"
=> You see a table with "Parent" found
- Click on small arrow left of the fund code of "Parent"
=> You see a new line with "Child" found
- Click on small arrow left of the fund code of "Child"
=> You see a new line with "Grand-Child" found
|
=> You see in "Grand-Child" row "Base-level spent" = 2 and "Total sublevels spent" = 2
=> You see in "Child" row "Base-level spent" = 2 and "Total sublevels spent" = 4
This confirms the founds are used in a hierarchie.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the ability to set an owner to a fund hierarchy
On editing a fund, if it has children, a new checkbox appears "Set this
owner to all children funds".
If checked, all the fund hierarchy will herit to this owner.
This will facilitate the fund owner modifications.
Test plan:
- Verify that the new checkbox only appears if the fund has at least a child.
- Create a consistent fund hierarchy, something like:
fund1
fund11
fund111
fund12
fund2
fund21
- Try to modify a fund owner without checking the checkbox. Verify the
children have not been modified.
- Try to modify a fund owner with checking the checkbox. Verify all fund
hierarchy has been modified.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
It works as announced.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When creating a fund, if you add some users, they are not linked to the
fund.
Note that it works if you link them when editing the fund.
Test plan:
- Try to link users to a fund on creating it.
- On editing, you should see the linked user list.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The "Show my funds only" is not take into account if the checkbox is not
checked.
So there is no way to show all funds.
This has been introduced by bug 11578.
The default is not "only mine". The default is "show all funds".
Test plan:
- Create fund where you are the owner and others where you are not.
- Go on the fund list view and verify the checkbox "show my funds only"
is take into account.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Note: In order to test this make sure you have funds owned by
another staff user.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch use the new module into pl and tt script.
Note that we could use it in the acqui/pdfformat/layout*.pm files.
Test plan:
1/ Verify that the acquisition home page displayes the prices as before.
2/ Verify that the budgets page displayes the prices as before.
3/ Verify that the funds page displayes the prices as before.
4/ Verify that the planning page displayes the prices as before. (Note
that 1 price is now formatted: 'Fund remaining').
5/ Create an order from a staged file. This stage file should contain a
formatted price.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test
1/ Apply patch
2/ Add or Edit a branch, filling out the new fields
3/ Check that the changes saved
http://bugs.koha-community.org/show_bug.cgi?id=9530
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The TT plugin is used in the template, it is useless and can cause
problems to format the dates before sending them to the template.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes the problem I was seeing before, didn't find any regressions.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Checked all three settings of dateformat. Looks fine to me.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There are a lot of warnings on navigating into the fund views (list,
editing, etc.)
"Use of uninitialized value in string eq..."
"Use of uninitialized value in hash element"
"Use of uninitialized value in concatenation..."
Test plan:
Verify the warnings don't appear anymore in logs on going on the fund
list view, editing a fund, saving a fund.
QA note: the budget_owner_name, budget_borrowernumber and branchname are
never used on the fund list view. A call to GetMember has been removed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This seems to work nicely reducing the amount of noise in the log
considerably.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since nobody is currently working on the zebra layer introduced by bug
8233, Solr won't never work.
Some code has been introduced in 3.10 to prove several search engines
can cohabit into Koha but no help/fund has been found to go ahead.
It is useless to keep this code and to maintain an ambiguous situation.
I think the indexes configuration page could be restore later if someone
else introduces a new search engine into Koha.
Test plan:
Look at the code introduced by bug 8233 and verify all is removed.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a column "Automatic renewal" to the circulation and
fine rules table.
To test:
1) Add or edit some issuing rules.
2) Confirm that "Automatic Renewal" is set to "No" by default and
can be switched to "Yes".
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Patch sponsored by the CCSR ( http://www.ccsr.qc.ca )
This new patch builds on the work of Bug 12164 by allowing the
user to enter a new name (budget_period_description) for the
cloned budget.
A test was added to t/db_dependent/Budgets.t.
Sponsored-by: CCSR
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Edit: added the sponsored-by line.
This patch makes adjustments in admin/z3950servers in order to insert,
edit and delete SRU server records.
Test plan:
Add, edit, copy and delete SRU server.
Check if adding, editing, copying and deleting Z3950 servers still works.
Signed-off-by: Giuseppe Angilella <giuseppe.angilella@ct.infn.it>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This form allows you to enter the match between the standard names of
the Z3950 search fields and the field names for a specific SRU server.
This patch only adds the form; it will be used in a subsequent patch.
Test plan:
Not needed, but you can call the form by constructing a URL like:
cgi-bin/koha/admin/sru_modmapping.pl?mapping=title=1,author=2
You should see the form with title and author filled.
Note that you cannot save the information yet.
Signed-off-by: Giuseppe Angilella <giuseppe.angilella@ct.infn.it>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
test plan:
Verify the
prove t/db_dependent/ColumnsSettings.t
returns green.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This development introduces ColVis into Koha and provides a configuration
page for columns visibility.
ColVis is a plugin for DataTables. It allows to change the visibility of
the columns in the table.
* This development adds:
- the js and css file for ColVis
- a new DB table 'columns_settings'
- a new template plugin 'ColumnsSettings'
- a new package C4::Utils::DataTables::ColumnsSettings
- a new admin page admin/columns_settings.pl
* How it works:
A yaml file is created (admin/columns_settings.yml) in order to take an
inventory of all tables where ColVis is implemented. This file is read
to create the list of modules, pages and tables in the configuration
page.
There are 3 possible keys in the yml:
- is_hidden: default is 0
The column will be hidden.
- cannot_be_toggled: default is 0.
ColVis will allow to hide/show the column.
- cannot_be_modified: default is 0
Default values (in the yml) won't be modifiable.
When a user changes (or saves) the configuration for one module, all
columns are added to the DB table. The values in the DB get the upper hand
on the yaml values.
* Humm, strange?
It seems weird to have 2 storages for the same values. But I
think it will be easy to add an entry and maintain the yaml rather than
adding a new row (and new entry in updatedatabase script) in the DB.
* To go further: We can imagine that the configuration is saved for each
user (and not globally like it is made with this patch).
This patch cannot be tested as it, you need to apply the "POC" patch.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, more comments on last patch.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Without this patch the library transfer page required the
'borrowers' permission, which is not quite right for a page
in the administration module.
This patch changes the permission to 'parameters_remaining_permissions'
To test:
Verify the page is accessbile with:
- superlibrarian
- administration (full)
- administration, remaining permissions (without manage_circ_rules)
Verify the page is not accessible without all of those permissions.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This changes the existing framework caching, which was using memoisation
if memcached was available, and memory in all cases, to use the
Koha::Cache system. This uses memcache if possible, and in-memory
otherwise. However it also clears the cache when the framework updates,
making sure that the changed version will be picked up.
Note that the in-memory cache clears itself after 10 seconds, so that if
memcached isn't available, this is the longest that old versions will
hang around.
Test plan:
* work through
http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=11842#c0
and make sure that the erronious result doesn't occur.
Note:
* The patch on bug 12041 is required for this to work.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes reported strings translatable.
To test:
1. Go to Administration > Library transfer limits
2. Depending on the value of BranchTransferLimitsType
your may see in a box:
a) For *all* Collection codes:
b) For *all* Item types:
change system preference to show both values
3. Update translation files for your preferred language
check new entry
msgid "%sCollection codes%sItem types%s: "
Not pretty but can be translated.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I have to confess that I lower cased the collections and item
types as they appear in a sentence.
No other changes made and this works nicely.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This cleans up the HTML in auth_subfields_structure.pl and
auth_subfields_structure.tt by:
- fixing some attributes
- removing some attributes
- and using a handy-dandy validation plug-in that Owen pointed
me at the other day.
TEST PLAN
---------
1) Install HTML Validator Plugin (Html Validator 0.9.5.8 Firefox addon)
2) Log in to staff client
3) Koha administration
4) Authority types (on the right, 5 down from Catalog header)
5) Click 'MARC structure' of any auth type
6) Click 'subfields' (I believe for any Tag >= 010)
7) Click 'Edit subfields'
8) Right click and select 'View Page Source'
-- Lots of HTML validation errors
9) View the 'Authorized value:' and 'Thesaurus:' drop down lists.
-- Patch cleans up code, so lists should remain unchanged
after applying patch
10) Apply the patch
11) Refresh the page (make sure it isn't cached!)
12) Right click and select 'View Page Source'
-- It should be down to 10 errors / 11 warnings.
NOTE: I think this means there is a code problem with
actually editing authorities properly!
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, much less validation errors, no koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
CÃleans up code, also removes SQL in favor of using a method.
No regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes the problem reported.
To test:
1) Apply the patch
2) Update translations for your preffered language, xx-YY
3) Check new entries
egrep -Rn "Cost must be expressed as a decimal number|Invalid value for" misc/translator/xx-YY*
4) Check no regression on alert, go to
Administration > Transport cost matrix
Edit some value and put a negative value & save,
alert must show up
5) On errors, part of the error string is now on TT file,
no regressions expected here
Verified that changes appear in translated language (de-CH) as appropriate. No regressions found by testing en en de-CH.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested both, entering a numeric value < 0 and non-numeric values, no regressions found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes the only instance in this file.
Don't know if the feature is of some utility, seems
that does not work (no use of auth values as indicators
on MARC editor)
To test:
1. Apply the patch
2. Go to Administration > MARC frameworks
3. Clic on MARC structure of any fw
4. Clic Edit on any tag
5. On tag editor check the pulldown 'Authorised value', that was replaced
6. Check for regressions: select a value, save, verify the value, change
again, etc.
Note: removed a SELECT, using now C4::Koha::GetAuthorisedValueCategories
Do not we need an AuthorisedValues.pm? (on C4 or Koha)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes the only instance in this file.
Also fixes array sorting, removes some tabs, removes
an unneeded $dbh handler (there is a global one).
Makes use of C4::Koha::GetAuthorisedValueCategories.
To test:
1. Apply the patch
2. Go to Administration > Authorised values
3. Replaced pulldown next to 'Show category' must
show all (present & system) categories correctly ordered.
4. Select some and check for regressions, e.g. CCODE, Bsort2, YES_NO
no changes must be observed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes 3 occurences on aqplan.pl
To test:
1. You need a budget and a fund
2. Apply the patch
3. Go to Aquisitions, click on your fund
4. Select one of the options on pulldown Planning
e.g. "Plan by months"
5. Now to the left there are two boxes, Filter and Export
a) Filter: (1) pulldown below 'Select planning type'
check that works selecting other values and submit
This pulldown showed originally code types,
untranslatable BTW. Added a TT block to allow translation
and shows legends that match Planning pulldown, but not
the order.
b) Export: pulldowns for filetype (2) and delimiter (3)
Those have originally one value each, and for me Export
does not work, before or after patch, but check that
pulldown exist.
Notes:
A) 5.a) I can change de order of main Planning pulldown,
is harcoded. The values for Filter pulldown are sorted on
aqplan.pl. Is one or the other.
If desired, TT block can be moved to includes/budgets-admin-toolbar.inc
(where hardcoded Planning lives)
B) 5.b) Moved 'Export' legend inside it's box, like Filter.
C) Finally: there is something strange, before or after patch.
There is an empty option 'Planning by " if you select planning
using main pulldown, it disappears if you select planning using
Filter (not a mistery, using Planning fills $auth_cats_loop,
using Filter submit button does not)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Looks like this needs more work, but no regressions found that were
caused by the patch.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes all instances on this file.
Also re-enable editor feature to show/change kohafield value, can't find when or why it was removed.
Up to QA or RM for consideration, simply to remove.
But is strange to have a non editable field on auth frameworks.
To test:
1. Apply the patch
2. Go to Administration > MARC frameworks
3. Clic MARC structure of any auth fw
4. Clic subfield on any tag, e.g. 020
5. Clic 'Edit subfields' button
Now the tests proper
6. On any subfield, check pulldown
'Managed in tab', was replaced, so test
if it works and search for regressions
Change, save, load, change again
7. Clic on 'Advanced constraints'
(2) scrolling list removed
At the bottom, check 'Koha link', was changed
Check assign/remove/save/load values, search for regressions
8. Clic on 'Other options' box
Eight(6) scrolling_list removed, they use to
feed three pulldowns, so check each one
'Authorised value',
'Thesaurus'
'Plugin'
Check assign/remove/save/load values, search for regressions
Check adding a new subfield
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, no regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch includes:
- the subroutines GetContract and GetContracts has been moved from C4::Acquisition.pm to C4::Contract.pm and adapted for a general use
- adaptation of acqui/basket.pl, acqui/basketheader.pl, acqui/neworderempty.pl, acqui/supplier.pl and admin/aqcontract.pl
- the unit tests for the module C4::Contract.pm
Test plan:
1) Apply the patch
2) Execute the unit tests by launching:
prove t/db_dependent/Contract.t t/Acquisition/ t/db_dependent/Acquisition/ t/db_dependent/Acquisition.t
3) The command has to be a success :
t/db_dependent/Contract.t ................................. ok
t/Acquisition/CanUserManageBasket.t ....................... ok
t/Acquisition/Invoice.t ................................... ok
t/db_dependent/Acquisition/GetBasketsInfosByBookseller.t .. ok
t/db_dependent/Acquisition/GetOrdersByBiblionumber.t ...... ok
t/db_dependent/Acquisition/Invoices.t ..................... ok
t/db_dependent/Acquisition/OrderFromSubscription.t ........ ok
t/db_dependent/Acquisition/TransferOrder.t ................ 1/11 # Transfering order to basket2
t/db_dependent/Acquisition/TransferOrder.t ................ ok
t/db_dependent/Acquisition/close_reopen_basket.t .......... ok
t/db_dependent/Acquisition.t .............................. ok
All tests successful.
Files=10, Tests=284, 15 wallclock secs ( 0.11 usr 0.02 sys + 12.88 cusr 0.77 csys = 13.78 CPU)
Result: PASS
4) Log on with a superlibrarian permission
5) Go on the page acqui/supplier.pl (Acquisitions > Button "New vendor")
6) Record a vendor with a nonzero "name"
7) Go on the page admin/aqcontract.pl (click on the "Contracts" item in the menu)
8) Click on the button "New" > "Contract" and record a new one
9) Verify the displayed data are correct about the contract
10) "Edit" the contract with different values and verify the data are updated
11) Click on "Delete" in order to delete the contract, verify the displayed data are correct but cancel the operation
12) Click on "New" > "Basket" and verify there is the created contract in field "Contract", then record a basket by selectioning the created contract
13) Verify the contract name displayed is correct
14) Record an active budget and a fund linked to this budget
15) Go on the new basket (Home > Acquisitions > Search the created vendor)
16) Click on "Add to basket" then "From a new (empty) record" and verify the displayed contract name is correct
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested with both patches applied.
Works as described following test plan, all points (I did 14 first)
All test pass
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes the only instance in this file.
Don't know if the feature is of some utility, seems
that does not work (no use of auth values as indicators
on MARC authority editor)
To test:
1. Apply the patch
2. Go to Administration > Authority types
3. Clic on MARC structure of any fw
4. Clic Edit on any tag
5. On tag editor check the pulldown 'Authorised value', that was replaced
6. Check for regressions: select a value, save, verify the value, change
again, etc.
Note: removed a SELECT, using now C4::Koha::GetAuthorisedValueCategories
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as expected, no regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes all (2) instances from koha2marclinks.pl.
Also changes dropdowns width on mapping editor, from an
ugly ragged right to a fixed width view.
To test:
1. Apply the patch
2. Go to Administration > Koha to MARC mapping
3. Pulldown in this view has been replaced, check
for regressions: change table type and press Ok,
verify you get Koha fields and tag/subfield appropriate
for each table.
4. Now press 'Edit' on any field, go into mapping editor
5. Check that all pulldowns show tag/subtags relevant
for each group ( 000s ... 900s )
6. Check that current mapping is displayed correctly
7. Check for regressions: unmap, remap, press Ok,
verify, change again.
8. If you can, check display of mapping editor on several
browsers, just in case.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I have tested with Firefox/Iceweasel only.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Also tested in Chromium.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes all instances on this file. Even removes some commented out instances.
Also re-enable editor feature to show/change kohafield value, can't find when or why it was removed.
Up to QA or RM for consideration, simply to remove.
But is strange to have a non editable field on auth frameworks.
To test:
1. Apply the patch
2. Go to Administration > Authority types
3. Clic MARC structure of any auth fw
4. Clic subfield on any tag, e.g. 031
5. Clic 'Edit subfields' button
Now the tests proper
6. 'Help input' box (editor bottom):
Eight(8) scrolling_list removed, they use to
feed the four pulldowns, so check each one
'Koha field' is new (for me at last)
'Authorised value',
'Thesaurus' (is this valid/useful here?)
'Plugin'
There is a difference between existing subtags and a new subtag,
the 'id' of the pulldowns (so the 8 scrolling list removed)
Check assign/remove/save/load values, search for regressions
If you edit subtag 942, it has a value on kohafield (default fw)
I think that this box could be prettified with fixed width for
pulldowns.
7. No more functional tests, there are 4 scrolling_list removed
that are commented (removed also commented code on tt file),
and two instances that are similar to previously removed
instances, evidently with no effect.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Not sure about the new Koha field entry... All works as expected.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All works as expected.
About Koha field: I think it makes sense to have it in the form,
so you can configure the fields for new authority types.
In my database I have mappings on authtypecode and authid.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This follow-up fixes issues raised on bug 12164 comment 17.
1/ The unreceived orders columns should only display "pending" orders
2/ Fix some typo from_budget_period_id vs budget_period_id vs
to_budget_period_id
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On closing a budget (budget period), the user will be presented with an
option to move remaining unspent funds from the previous budget to the
newly created one - adding to the amounts already entered in those
funds.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This is the main patch.
On closing a budget period, all unreceived orders are moved from the
old/previous fiscal year into the new fiscal year.
You can rollover funds unused in the previous fiscal year to the new
fiscal year.
This patch set is based on bug 12168 (bugfix) and can be tested on top
of bug 11578 (easier to see the fund structure).
The patch set is cut in 6 main patches:
- Move the budget period clone logic into C4::Budgets
The code is moved from the pl to Budgets.pm and unit tests are provided.
The original code should certainly be buggy since a typo existed.
- On cloning budget period, mark original budget as inactive
Cloning a budget period is already possible in Koha, this patch adds a
checkbox to mark as inactive the original budget. That avoids to edit
the budget and click the "inactive" checkbox. Both do the same action.
- On cloning budget periods, add a "reset all funds" option
Same as before, a new checkbox is added on cloning a budget period. If
you check it, all fund amounts will be set to 0. Otherwise, no change
compared to the existing behavior.
- Close a budget period (budget)
The goal of this patch set is to move unreceived orders from a budget to
another. This patch adds a C4::Budgets::MoveOrders routine which does
this job.
This action is only possible if the fund structure is the same for both
budgets, the budget_code field should be the same.
- On closing budget period, move unspent amount
Unspent amount will be move from the previous budget structure to the
new one.
- Add UI report
This patch only adds a report when closing a budget is done.
Test plan:
Wording: below, budget is a "budget period" and fund is a "budget".
Prerequisite: Having 1 active budget with some funds (with different
levels and different amounts). Order and receive some orders (not all).
1/ Go on the budgets administration page (admin/aqbudgetperiods.pl) and
duplicate the structure of this budget ("Duplicate" link in the
"Actions" column).
2/ Enter start and end date for this budget and mark the original budget
as inactive.
3/ Note that a new budget is created, with the same fund structures (and
same value) and that the old one is marked as inactive (see
admin/aqbudgets.pl page with patches from bug 11578).
4/ Try to close the new budget: it is not possible, there is no
unreceived orders for this budget.
5/ You can close the inactive budget ("Close" link in the "Actions"
column).
6/ Verify the number of "Unreceived orders" is correct and select the
new budget in the budget list. Click on the "Move remaining unspent
funds" if you want to move unspent amounts.
7/ A report view is displayed and show you the ordernumber which have
been impacted (grouped by fund).
8/ Try different configuration, depending on the selected checkboxes.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a checkbox "reset all funds" (budgets).
If it is checked, the new created budgets (funds) will be reset.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a checkbox "mark original budget as inactive" (budget
period).
If it is checked, the original budget will be marked as inactive.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Note the typo InsertInTable "aqcudgets", note sure about the existing
behavior before this patch!
This patch adds a link "Duplicate" in the action list for budget
periods (budgets).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When finding a row by its primary key, it is not necessary to
pass a hashref, only the primary key value itself is required.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch replaces DBIx search by find at two places in z3950servers.pl.
Furthermore, it adds testing on the results of the find method, passing
a not-found-message to the template whenever needed.
The function ServerSearch is adjusted to use HashRefInflator instead of
manually mapping the columns of result objects.
An additional defined-test in _form_data_hashref prevents shifting of
names and values in the result hash.
Test plan:
List all servers. Edit, copy and delete a server.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes a few tiny improvements on the form, does some
housekeeping/tidying up, and replaces SQL code by DBIC statements.
In detail:
- Adds an id parameter (more precise than searchfield).
- With the move from searchfield to id, you can rename a server now.
- A Copy button is added to clone a server.
- Confirming a delete is moved to javascript. No additional form anymore.
- A message about an insert, update or delete is shown in a div dialog
alert above the table instead of a separate form.
- Remove offset parameter, Next/Prev button and associated logic.
- All SQL statements are replaced by DBIC.
- Function StringSearch is renamed to DBICified ServerSearch.
- Remove tabs from script and template. Adjust some indentation.
Test plan:
- Test adding, editing and deleting Z3950 servers.
- Test searching for a server with the top search box (not table).
- Add a server with quotes in the name. Search for it. Edit or delete.
Followed tet plan. Patch behaves as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If a contract cannot be removed, no errors is displayed. Now, it displays an dialog messag error and the list of contracts.
Test plan:
1) Log on with a superlibrarian permission
2) Go on the page acqui/supplier.pl (Acquisitions > Button "New vendor")
3) Record a vendor with a nonzero "name"
4) Go on the page admin/aqcontract.pl (click on the "Contracts" item in the menu)
5) Click on the button "New" > "Contract" and record a new one
6) Click on "New" > "Basket" and record a basket by selectioning the created contract
7) Click on the contract name, then click on the "Contracts" item in the left menu
8) Try to delete this contract, an error is displayed : "Contract has not been deleted. Maybe a basket linked to this contract exists."
9) Delete the basket linked to the contract
10) Delete the contract, no errors is displayed
Signed-off-by: Juhani Seppälä <jseppal@student.uef.fi>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script an tests.
Also tested adding, editing and deleting unused contracts.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
As of the public coding guidelines, $$variable{key} usage is discouraged. $variable->{key} should be used instead.
Btw, honour the "FIXME - Bug 2505" line :-D
Regards
To+
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch includes:
- removing the use of subroutines InsertInTable, UpdateInTable, SearchInTable replaced by subroutines of DBIx::Class in the subroutines AddBudget, ModBudget, GetBudgets, AddBudgetPeriods, ModBudgetPeriod and GetBudgetPeriods and admin/aqbudgetperiods.pl
- removing old database fields in OrderFromSubscription.t, Bookseller.t, Budgets.t, Serials.t, Serials_2.t
- improvement of unit tests in t/db_dependent/Budgets.t
- adaptation of calls to the subroutines AddBudget, ModBudget, GetBudgets, AddBudgetPeriods, ModBudgetPeriod and GetBudgetPeriods in order to match with the use of DBIx::Class
Test plan:
1) Execute the UT of all of files wich uses AddBudget, ModBudget, GetBudgets, AddBudgetPeriods, ModBudgetPeriod or GetBudgetPeriods by launching the command :
prove t/Budgets/ t/Budgets.t t/db_dependent/Budgets.t t/db_dependent/Acquisition.t t/db_dependent/Acquisition/ t/db_dependent/Bookseller.t t/db_dependent/Serials.t t/db_dependent/Serials_2.t
2) The result has to be a success :
t/Budgets/CanUserModifyBudget.t ........................... ok
t/Budgets/CanUserUseBudget.t .............................. ok
t/Budgets.t ............................................... ok
t/db_dependent/Budgets.t .................................. ok
t/db_dependent/Acquisition.t .............................. ok
t/db_dependent/Acquisition/GetBasketsInfosByBookseller.t .. ok
t/db_dependent/Acquisition/GetOrdersByBiblionumber.t ...... ok
t/db_dependent/Acquisition/Invoices.t ..................... ok
t/db_dependent/Acquisition/OrderFromSubscription.t ........ ok
t/db_dependent/Acquisition/TransferOrder.t ................ 1/11 # Transfering order to basket2
t/db_dependent/Acquisition/TransferOrder.t ................ ok
t/db_dependent/Acquisition/close_reopen_basket.t .......... ok
t/db_dependent/Bookseller.t ............................... 16/72 WARNING: GetBooksellerWithLateOrders is called with a negative value at /home/yohann/koha/C4/Bookseller.pm line 135.
t/db_dependent/Bookseller.t ............................... ok
t/db_dependent/Serials.t .................................. ok
t/db_dependent/Serials_2.t ................................ ok
All tests successful.
Files=14, Tests=571, 22 wallclock secs ( 0.17 usr 0.03 sys + 20.26 cusr 1.10 csys = 21.56 CPU)
Result: PASS
3) Go on the page admin/aqbudgetperiods.pl : Koha Administration > Budgets
4) Click on the button "New Budget" and record a new budget with a "nonzero amount" and "make budget active"
5) Click on the button "New Budget" and record another budget without "make budget active"
6) Verify there is the firt budget displayed in "Active budgets" and the second budget in "Inactive budgets"
7) Edit a budget and verify the new values are updated
8) Click on the budget active name in order to go on the page admin/aqbudgets.pl
9) Click on the button "New fund for ..." and record a new fund
10) Click on the button "Edit" then "Duplicate budget ..." in order to duplicate the budget
11) Verify there are two budgets in "Active Budgets" and one in "Inactive Budgets"
12) Click on "Funds" in the menu and verify there are two identical funds and each is associated to a different budget.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
- Add a new patron category
- After saving, the new patron category won't show up in the list
- Apply patch
- Try to add a new patron category again
- It should now save correctly and show up in the list of patron
categories.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Temporary fix into preferences.pl.
Bug 11944 should provide the real fix..
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
This patch adds a new issuing rule: maxsuspensiondays.
A new column "Max. suspension duration (day)" appears in the main table
of the issuing rules.
If this value is filled, on returning an item, a patron won't be
suspended longer than this cap.
Test plan:
1/ Set "suspension in days" to 2.
2/ Check an item out to a patron and specify a due date to today - 10
days.
3/ Check the item in and verify the patron is suspended until today + 10
* 2 days.
4/ Remove the suspension.
5/ Set "Max. suspension duration" to 10.
6/ Check an item out to a patron and specify a due date to today - 10
days.
7/ Check the item in and verify the patron is suspended until today + 10
days.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There is currently no way to set the privacy setting for newly created
patrons. This patch adds a new field "default privacy" to the patron
categories such that each patron category may have a different default
privacy setting.
Test Plan:
1) Apply this patch
2) Edit a patron category, change the default privacy to "forever"
3) Create a new patron of that category
4) Log into the catalog as that patron, verify the privacy setting
is set to "forever"
5) Repeat steps 2-4 with the settings "never" and "default"
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Bug 6254 [QA Followup 1] - can't set patron privacy by default
* Adds default privacy column to summary table
* Adds default privacy to delete category summary
* Adds "AFTER categorycode" to the database update
* Whitespace cleanup and formatting for affected code blocks
* Switch basic DBI queries to DBIx::Class to simplify code
* Adds reference to misc/cronjobs/batch_anonymise.pl to description
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Bug 6254 [QA Followup 2] - can't set patron privacy by default
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Bug 6254: QA FIX: remove trailing whitespaces
This patch removes trailing whitespaces/tab and fix the fields order in
the updatedb entry (according to the kohastructure.pl).
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
A really weird (and old) code process the calculation for the spent and
ordered sublevel funds.
It only takes into account the direct children.
So if you have:
fund1 (spent=100) parent of fund11 (spent=10) parent of fund111 (spent=1),
you get:
fund | base-level | total spent
fund1 | 100 | 110
fund11 | 10 | 11
fund111 | 1 | 1
which is wrong, it should be
fund | base-level | total spent
fund1 | 100 | 111
fund11 | 10 | 11
fund111 | 1 | 1
Test plan:
- Create 1 budget and 3 funds with the same structure as above.
- Create some orders and receive them (not all).
- Go on the fund list view and verify the values are correct.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Pick a patron, note the patron's category
5) Issue an item to this patron
4) Edit that category, set "Block expired patrons" to "Block"
5) Verify the patron cannot renew or place holds in the OPAC
6) Edit the category again, set "Block expired patrons" to
"Don't block"
7) Verify the patron *can* renew and place holds in the OPAC
8) Edit the category again, set "Block expired patrons" to
"Follow system preference BlockExpiredPatronOpacActions"
9) Set the system preference BlockExpiredPatronOpacActions to
"Block"
10) Verify the patron cannot renew or place holds in the OPAC
11) Set the system preference BlockExpiredPatronOpacActions to
"Don't block"
12) Verify the patron *can* renew and place holds in the OPAC
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Melia Meggs <melia@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch in series.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
buildCGISort can be deleted.
Test plan:
git grep buildCGISort
should return no result.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No more buildCGISort
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Initial bug :
When there's a round price with no decimals after it,
or when the symbol is after the digits, the price is not captured
by regular expression in MungeMarcPrice routine and the variable
is not initialized.
Enhancement :
The MungeMarcPrice routine had been widely modified.
It's still possible to priority pick the active currency but
unlike the previous mechanism that worked only for prices preceded
by the currency sign, it's now valid wherever the symbol is situated.
As symbol you may enter a pure currency sign as well as a string
including it like '$US'. Moreover, an 'isocode' column had been
added in currency table (editable in the staffo interface from
Administration/Currencies and exchange rates). So the active
currency can be picked either through its symbol or through its iso
code.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests, especially t/db_dependent/MungeMarcPrice.t
Checked currencies can be added, edited and deleted.
Notes: new ISO code field is mandatory.
Sample sql files need to be updated (bug 12146)
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The current funds list view does not allow to search in the table and
the ergonomics of the page is quite bad.
This patch add the datatables plugin combined to the treetable plugin in
order to offer a better view of the budgets/funds.
Test plan:
- Verify there is no regression on this page: try to add/modify/delete a
fund and a budget.
- Verify the funds hierarchy is correctly displayed.
- Filter the funds using the branch and the budget filters.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch ensures that the sip_media_type is set to NULL
rather than the empty string when it is cleared via item
types administration.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Koha's SIP2 server implementation does not currently support the SIP2
protocol field "media type" ( CK ).
This patch implements the SIP2 media type by allowing an arbitrary
mapping of itemtypes to SIP2 media types.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) Edit an itemtype, select a SIP media type, and save the changes
4) Make a SIP2 Item Information Request
5) Verify that the CK field of the Item Information Response contains
the correct media type code.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
admin/aqbudgets.pl should have the following columns:
Base-level allocated (or just Allocated)
Base-level ordered
Total sub-levels ordered
Base-level spent
Total sub-levels spent
Base-level available
Total sub-levels available
Base-level is always calculated for one level, without children.
Total sub-levels should include child funds.
Available is calculated as "allocated - (ordered + spent)".
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Seems to work alright for me.
Passes QA script and tests, after I fixed 2 tabs in admin/aqbudgets.pl.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch replaces occurrences of CGI::scrolling_list with
untranslatable labels. It also fixes capitalization.
To test
1. Go to Administration > Authority types,
click 'MARC structure' of any auth type,
click 'subfields' for any Tag >= 010,
clic 'Edit subfields'
Check pulldowns 'Managed in tab' and 'Select to display or not'
2. Apply the patch
3. Reload and verify functionality of both pulldowns
4. Check that strings are not present on staff PO file
egrep "^msgid \"(Show all|Hide all|ignore)" misc/translator/po/fi-FI-i-staff-t-prog-v-3006000.po
5. Update language file
(cd misc/translator/; perl translate update fi-FI)
6. Check that strings are now present, repeat 4.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: drop-downs work identically. Show all, Hide all, and
ignore were added to the po files too.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works as described and improves the page to manage authority
subfields.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch ensures both both '0' and strings consisting of zero
or more blanks are recognized by the circ rules editor as specifying
clearing the "no renewal before" value. Concretely, this fixes
warnings of the following form when clearing this field:
Argument "" isn't numeric in numeric eq (==)
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a column "No renewal before" to the circulation and
fine rules table.
To test:
1) Add or edit some issuing rules.
2) Confirm that an empty entry, zero and non-numerical values for
"No renewal before" are saved as undefined.
3) Confirm that numerical values can be entered and saved.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Currently both the import_export_framework.pl script outputs data with
Perl's default encoding, ISO-8859. This patch properly sets
the binmode to UTF-8 when exporting SQL and CSV files using the PerlIO
layer (":encoding(UTF-8)") for STDOUT.
To test:
Export step test
- Use some ASCII character(s) with DIACRITICS in some field description
in a chosen framework.
- Export the framework at Administration > MARC frameworks
- Run this to check the file is ISO-8859 encoded:
$ file export_XXX.csv
export_XXX.csv: ISO-8859 text, with very long lines
(Note: try SQL and other output formats too. But not ODS)
- Apply the patch
- Export the framework again (change the name), and test encoding:
$ file export_XXX_2.csv
export_XXX_2.csv: UTF-8 Unicode text
Import step test
I assume you have two files, export_XXX.csv (ISO-8859 encoded) and
export_XXX_2.csv (XXX will depend on your framework's code)
- Reset your testing branch to master
- Import export_XXX.csv
- The string with non-ASCII chars is truncated at the first non-ASCII
char's position (Note: this is the current behaviour).
- Import export_XXX_2.csv
- The non-ASCII chars are broken, the logs show errors on non-UNICODE
chars. (Note: even thou UTF-8 is the expected encoding it is
treated as ISO-8859).
- Apply the patch
- Import the good (UTF-8 as expected) file and check everything worked
as expected.
No double encoding should occur with either combination of formats.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
I put some Norwegian and accented letters in a fremawork to test.
Before the patch, the exported CSV came out as ISO-8859, after the
patch it came out as UTF-8. ODS and XML (viewed in LibreOffice)
both looked good, before and after the patch.
Importing the ISO-8859 CSV cut off the strings at the first non-ASCII
char. Importing the UTF-8 CSV worked as epected.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as expected, passes tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If you are using the transport cost matrix, and you create a new
library, you cannot edit the fields for this library!
Test Plan:
1) Enable the transport cost matrix
2) Set some transport cost values in the matrix
3) Save the matrix
4) Create a new library
5) View the transport cost matrix again
6) Note the uneditable fields for the new branch
7) Apply this patch
8) View the transport cost matrix again
9) Note you can now edit the fields for the new branch
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The sth was created before the query.
The query was modified after the sth creation and an error was raised.
Test plan:
0/ Don't apply the patch
1/ Create a budget A (amount=1000)
2/ Create a fund A1 (amount=1000)
3/ Create a child fund A11 (amount=1000)
4/ Edit A11 and change the amount to 2000
You are able to do it, an error appears in the Koha log:
"check_parent_total.pl: DBD::mysql::st execute failed: called with 2 bind
variables when 1 are needed"
5/ Apply the patch, edit A11 and save. You get an error
6/ Edit A11 and change the amount to <=1000
7/ Verify that there is no regression on adding/removing/editing budgets
and funds.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works as described, no regressions found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently road types are stored in a specific table in DB. Moreover, an
admin page is present in order to manage them.
This patch proposes to remove this table and this page in favour of a
new authorised value category 'ROADTYPE'.
This patch:
- adds a new AV category 'ROADTYPE' (created from the roadtype table
content).
- remove the roadtype table.
- remove the .pl and .tt file admin/roadtype
- remove the 2 routines C4::Members::GetRoadTypes and
C4::Members::GetRoadTypeDetails
Test plan:
1/ Execute the updatedatabase entry and verify existing roadtypes are
now stored in the AV 'ROADTYPE'.
2/ Verify you can add/update a streettype for patrons.
3/ Verify on following pages the streettype is displayed in patron
information (top left):
circ/circulation.pl
members/memberentry.pl
members/moremember.pl
members/routing-lists.pl
Signed-off-by: Sophie Meynieux <sophie.meynieux@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Arithmetic with monetary amounts is a *hard* problem -- or if
not hard, at least super-fiddly, particularly since in theory
a Koha database could have to deal with dozens of currencies
if used by a large research library. This patch adds a FIXME
implicitly commenting on the poor state of affairs of available
monetary calculation modules on CPAN.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When attempting to update a fund, if the amount unalloccated for the
fund is equal to the total, you can be prevented from saving. This is
due to imprecise floating point number comparison in
check_parent_total.pl
Test Plan:
1) Create a fund where the amount unallocated is equal to the amount
unallocated for the budget period
2) Edit the fund, attempt to change the name of the fund
3) Note you recieve an error and cannot save
4) Apply this patch
5) Repeat step 2
6) Note you can now update the fund
Signed-off-by: Sean McGarvey <smcgarvey@pascocountyfl.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The page for adding a new tag to an authority framework includes some
custom form validation JavaScript which can be removed in favor of HTML5
validation attributes and Koha's built-in validation plugin. This patch
does so.
The patch also moves some tag markup out of the script and into the
template where it belongs.
To test, apply the patch and go to Administration -> Authority types ->
MARC structure -> New tag. Try submitting the form without entering a
tag number. This should trigger a validation warning.
Submission of the form with valid data should work correctly. Editing an
existing tag should also work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The page for adding a new tag to a MARC framework includes some
custom form validation JavaScript which can be removed in favor of HTML5
validation attributes and Koha's built-in validation plugin. This patch
does so.
The patch also moves some tag markup creation out of the script and into
the template where it belongs.
To test, apply the patch and go to Administration -> MARC bibliographic
framework -> MARC structure -> New tag. Try submitting the form without
entering a tag number. This should trigger a validation warning.
Submission of the form with valid data should work correctly. Editing an
existing tag should also work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Great improvement! Before this patch, I got a JS alert but the form was
submitted anyway.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The SQL option for MARC framework imports was subject to a bug whereby
somebody could use it to gain access to arbitrary information in the
database by uploading an SQL file containing unexpected statements.
As it is difficult to securely sanitize SQL, this patch removes the
option to use SQL as an import or export format.
To test:
[1] Verify that SQL no longer appears as an import or export option
for the MARC frameworks.
[2] Verify that exports and imports in CSV, Excel XML, and ODS formats
still work.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as advertised. The UI doesn't offer exporting/importing in the SQL format.
Crafting the URL to export SQL fallbacks to a spreadsheet format (ODS).
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes the MARC framework import/export script require
that the staff user be logged in with appropriate permissions for
managing the MARC frameworks.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I can confirm the bug and the solution. After applying the patch
downloading the file without logging in first is no longer possible.
Also passes tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Just going to the patron categories page triggered errors.
Running through all the plain options also triggered other
warnings. This fix silences them.
Discovered tabs I had not corrected by running qa test tool.
Some errors which I could not trigger were also fixed, such
as line 248 shown by Merllissia Manueli.
TEST PLAN
---------
1) Log in to staff client
2) Click 'Administration'
3) Click 'Patron categories'
4) Click '+ New category'
5) Enter a dummy category and click 'Save'
6) Click 'Edit' for the dummy category.
7) Change a value and click 'Save'
8) Click 'Delete' for the dummy category.
9) Confirm to delete.
10) Review error log, several new warnings
11) Apply patch
12) Run the koha qa test tool.
13) Click 'Home'
14) Click 'Administration'
15) Click 'Patron categories'
16) Click '+ New category'
17) Enter a dummy category and click 'Save'
18) Click 'Edit' for the dummy category.
19) Change a value and click 'Save'
20) Click 'Delete' for the dummy category.
21) Confirm to delete.
22) Review error log, no new warnings
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Followed test plan, saw no errors in the log after applying the patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested various dates and enrollment periods with different settings of
dateformat pref. Works as advertised. No warnings.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch:
- Makes the new subfield tab show maxlength=9999 as default (instead of
empty-then-zero).
- Updates the help to make exlpicit that 0 or empty defaults to 9999.
- Assumes all the subfields created with maxlength=0 inadvertedly are
meant to mean "no limit" and hence update the database to reflect
that.
To test (this patch and Pablo's):
- Edit a MARC framework, edit some field's subfields.
- Use the 'New' tab to create a new subfield (choose an unused letter).
- See in "More constrains" that the "Max length" field is empty. Leave
it as-is.
- Save the changes (the new subfield).
- Edit the field again, verify that "Max length" is 0.
- Try tu use the framework and the the field/subfield just created
> FAIL
- Apply the patches, upgrade
- Try to use the framework/field/subfield > SUCCESS (0 was converted to
9999)
- Repeat from the begining, "Max length" should show 9999 on the new
subfield tab.
- Leave it empty, it is saved as 9999.
Edit: small typo
Sponsored-by: Universidad Nacionald de Cordoba
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests in t and xt.
Tested:
- deleting an existing subfield
- adding a new subfield with new default 9999
- editing the new subfield, changing value to 8888
- deleting new subfield
- adding new subfield, using 8888 as length
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The default value for the marc_subfield_structure.maxlenght is 9999
in the DB. Currently the template passes an empty value which is casted to
0 by the CGI.
This simple patch validates the input and converts to the default (9999)
if not defined or 0.
Another approach could be changing the 9999 default and/or treating 0 as
'no-limit'.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works by defaulting 0 or "" to 9999.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In funds administration, admin/aqbudgets.pl, there is a combobox for
filtering by library code.
The bug is that the filter uses a pattern match instead of equals :
next unless $budget->{budget_branchcode} =~ m/$filter_budgetbranch/;
In this case, if there is a library with code '1' and one with code '12',
filtering by library '1' will also show funds of library '12'.
Test plan :
- Create a library with code '1' and one with code '12'
- Create funds in both libraries
- Go to admin/aqbudgets.pl
- Filter by branch '12'
=> You see only funds of this library
- Filter by branch '1'
=> You see only funds of this library
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10602 introduces a bug when adding a new subfield to an authority
framework. A new parameter is added in a sql query but the placeholder
is missing.
Test plan:
- edit an authority framework
- add a new subfield
- save
- boom!
DBD::mysql::st execute failed: called with 16 bind variables when 15 are
needed at
/home/home/src/admin/auth_subfields_structure.pl line 454.
- apply the patch and try again
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors
Tested trying to add subfield to 100, 2 for example.
Without patch silently fails (but error is logged)
With patch subfield creation or elimination is fine
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
One line fix for a bad bug. Confirmed the bug on master and
the fix. Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Wrong usage of UNION instead of UNION ALL prevented the count to match
the expected value.
Steps to reproduce:
- Create an itemtype.
- Create some biblios setting the created itemtype at biblio level.
- Create some items setting the created itemtype on them.
- Try to delete the itemtype in Home > Administration > Item types, the
count is 1 and doesn't match the expected result.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This is a bit pedantic -- since for obvious reasons, I can't
see us ever letting '0' be the name of a system preference,
and I suspect it's impossible for the value of something in the
$ENV hash to be undefined -- but better to test for exactly what
we mean.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Calling split on an undefined var generates warning to
the log. Let's check it exists before processing it
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
2 DB fields are not used: aqbudgets.encumb and aqbudgets.expend.
This patch uses these fields in order to show a warning message if the
budget selected for an order has exceeded.
Test plan:
- Create a new active fund with at least 1 of both warning fields
('Warning at (%)' and 'Warning at (amount)').
- Create a new order for a basket with this new fund and a cost >
warning amount defined for the fund (or using %).
- Save and check that a warning message appears
- Retry playing with all combinations of warning fields
Signed-off-by: Koha Team Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
- Create a new authority type
- Click MARC structure
- Verify the pull down has only 1 entry for Default
- Go on the authority type home (admin/authtypes.pl)
- Click on the "MARC structure" link for the default type
- Verify the pull down has only 1 entry for Default
This patch adds a sort (on the authtypecode) for these 2 lists.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Works as described. No koha-qa errors.
When creating a new framework it would be better to have Default
on top, but one is way better than two :)
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Agreed, one is better than two :)
All tests and QA script pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch allows to define default values in the authorities framework.
Some code already existed but the feature did not work.
Test plan:
1/ Choose a framework, field and subfields.
2/ Define a default value.
3/ Create a new authority and check that the subfield is
automatically filled with the default value.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. koha-qa reports some tabs, fixed in followup
Test
1) Apply patch, run updatedatabase.pl
2) Edit auth framework, put default value someware, save
3) Add new auth, default value present
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Verified database update is done correctly.
Controlfields 0xx
- Edited an existing field (001)
- Set a default value for subfield @
- Edited subfield again, checking default was saved correctly
- Verified the default shows up correctly when creating a
new authority using this authority type
Fields
- Edited an existing field (100)
- Set a default value for subfield e
- Edited subfield again, checking default was saved correctly
- Verified the default shows up correctly when creating a
new authority using this authority type
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In OAI set mappings, the value "is equal to" is hardcoded. This
enhancement changes it to a dropdown menu to choose between "is equal
to" and "not equal to".
To test:
* define a set
* define a mapping for said set with "is equal to"
* run /misc/migration_tools/build_oai_sets.pl -r -v
* confirm that you have correct entries in SQL: select * from
oai_sets_biblios;
* change mapping to 'not equal to', save
* run /misc/migration_tools/build_oai_sets.pl -r -v
* confirm that you have correct entries in SQL: select * from
oai_sets_biblios;
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: Fix bug id in updatedb.pl
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch introduces a new Z39.50 interface for searching Z39.50
compliant databases for MARC authority records.
These databases aren't as common as their bibliographic equivalents,
but they're out there and very useful. I have included info at the
bottom of this messsage for sample authority databases you can try.
To test this patch:
1) Set up Z39.50 client targets for authority databases. (I've included
information at the bottom of this message for LibrariesAustralia's
test server for authorities as well as instructions on how to use
your Koha's z39.50 authority server as well. The Library of Congress
also has authority databases available (unsure if these are test or
prod), and you might have access to others through OCLC or RLIN. OCLC
provides login credentials for their test databases.
2) Go to the Authorities module
3) Click on the new "Z39.50 search button"
4) Select your authority search targets from the list.
5) Do a search for an authority you would like using either the "Raw"
input box or the more specific input boxes for names, subjects, subject
sub divisions, or titles. (I like searching Name (personal): Eric on
the LibrariesAustralia test DB.)
6) You should see a table listing the server, heading, authority type,
and two other columns (MARC and a nameless column). "Authority type"
is the type of authority it will become when imported in to Koha. In
the Eric example, "PERSO_NAME".
7) Click on "MARC" next to the results of interest to review the MARC
authority record.
8) When you're satisfied with a record, click on "Import".
9) The pop-up window will close and your original Koha window will
change to the "Adding authority Personal Name" screen (in the Eric
example).
10) All the relevant fields should be filled out for the record. Review
them and make any changes as necessary. (N.B. The 001 will be cleared
when saved, so if you have a use for the imported control number, move
it to the 010, 016, or 035 as appropriate. If you have a default value
for the 003, this will also likely be overwritten. Move it if necessary.
The 005 will also be updated when saved, so do not worry about that.)
11) When you're satisfied, click save.
12) Presto! You've imported your first authority record via Z39.50!
--
Here is the info for the LibrariesAustralia test Z39.50 authority
database:
Z39.50 server: LibrariesAustralia Authorities
Hostname: z3950-test.librariesaustralia.nla.gov.au
Port: 210
Database: AuthTraining
Userid: ANLEZ
Password: z39.50
Syntax: MARC21/USMARC
Encoding: utf8
-
The U.S.A. Library of Congress also provides Z39.50 access to its Name
and Subject Authorities (http://www.loc.gov/z3950/lcserver.html).
Name Authority:
Z39.50 server: Library of Congress Name Authority File
Hostname: lx2.loc.gov
Port: 210
Database: NAF
Syntax: MARC21/USMARC
Encoding: utf8
Subject Authority:
Z39.50 server: Library of Congress Subject Authority File
Hostname: lx2.loc.gov
Port: 210
Database: SAF
Syntax: MARC21/USMARC
Encoding: utf8
(N.B. Both of these databases also include title authorities.)
-
For testing purposes, you can also set up a Z39.50 client target,
which points at your own Koha instance's Z39.50 authority server.
To find the hostname, go to /etc/koha-conf.xml and find the value for
the <listen id="authorityserver"> element. Depending on your
configuration, this could be something like the following:
unix:/zebra/koha/var/run/zebradb/authoritysocket
(N.B. You might be using a different scheme than unix sockets...)
To find the database, scroll down to the bottom of koha-conf.xml until
you reach the <config> element. Within this, look for the value of the
element <authorityserver>. It should probably be "authorities".
To set up this Z39.50 client target in Koha...
Z39.50 server: my koha authorities
Hostname: unix:/zebra/koha/var/run/zebradb/authoritysocket
Port:
Database: authorities
Userid:
Password:
Syntax: MARC21/USMARC (or whichever flavour you need)
Encoding: utf8
Signed-off-by: Mason James <mtj@kohaaloha.com>
Bug 10096 [FOLLOW-UP] - Add a z39.50 interface for authority searching
This patch adds the "recordtype" column to the "z3950servers" table.
The value in this column (biblio or authority) then controls whether
the z3950 server shows up in a bibliographic search (through the
Acq and Cataloguing modules) or in an authority search (through
the Authorities module).
I also edited the z3950 management console to show this value
and allow users to edit it. The default value is "biblio", since
the vast majority of z3950 targets will be bibliographic. However,
there is an option to add/edit a z3950 target as a source of
authority records.
Test Plan:
1) Apply both patches
2) Run updatedatabase.pl (after setting your KOHA_CONF and PERL5
environmental variables)
3) Use the test plan from the 1st patch
N.B. Make sure that your Z39.50 client target has a Record Type
of Authority, otherwise it won't display when you're doing a
Z3950 search for authorities.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Bug 10096 [FOLLOW-UP] - fix tabs/whitespace errors to pass QA
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new column to item types. Text in this column is
displayed as a warning when an item of the given type is checked in.
The type of message can also be chosen, affecting how the message is
displayed.
Use case: Items that are on inter-library loan can have a separate
item type, and when items of this type are checked in a message
saying something like "ILL! Remember to return it to the owning
library!" can be displayed.
To test:
- Apply the patch
- Go to Home > Administration > Item types administration
- Check that there is a new column, called "Check in message"
- Edit an item type and add a check in message
- Check that the check in message you added is displayed in the table
- Check in an item with an item type that has a check in message
- Check that the message is displayed
- Repeat the steps above, but select "Alert" instead of the default
"Message" as the "Check in message type". Check that the message
is displayed in a yellow alert box, not a blue message box.
- Check in an item with an item type that does *not* have a check
in message, and make sure no false messages are displayed
- Create a new item type from scratch and check that it works
the way it is supposed to
- Run the tests in t/ItemType.t, which are updated by this patch
This patch also removes backticks around column names in the
itemtypes table in installer/data/mysql/kohastructure.sql
UPDATE 2013-07-22
- Rebased on current master (no changes)
- Added "AFTER summary" to the SQL statement in updatedatabase.pl
- Added another placeholder on line 170 of admin/itemtypes.pl
Thanks Katrin!
UPDATE 2013-07-29
- Make this message independent of all other messages - thanks Owen!
- Make it possible to choose the type of message ("alert" or
"message")
Sponsored-by: Kultur i Halland - Regionbibliotek
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed some tabs to make the QA script happy.
All old and new tests pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
For Koha installations with multiple OPAC URLs, It would be nice to be
able to override systeprefs from the http conf file. Case in point,
a library wants to have two separate opacs, one the is only viewable
from within the library that allows patrons to place holds, and a second
public one that does not. In this case, overriding the system preference
RequestOnOpac would accomplish this simply, and with no ill affects.
This feature would of course be should only be used to override
cosmetic effects on the system, and should not be used for system
preferences such as CircControl, but would be great for preferences
such as OpacStarRatings, opacuserjs, OpacHighlightedWords and many
others!
Test Plan:
1) Apply this patch
2) Disable the system pref OpacHighlightedWords
3) Do a seach in the OPAC, not the term is not highlighted
4) Edit your koha-http.conf file, add the line
SetEnv OVERRIDE_SYSPREF_OpacHighlightedWords "1"
to your koha-http.conf file's OPAC section.
Also add the line
SetEnv OVERRIDE_SYSPREF_NAMES "OpacHighlightedWords"
to the Intranet section
5) Restart your web server, or just reload it's config
6) Do a seach, now your search term should be highlighted!
7) From the intranet preference editor, view the pref,
You should see a warning the this preference has been overridden.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes an issue where entering the complete name of a system
preference when doing a syspref search in the staff interface resulted
in the display of *all* preferences belonging to the desired one's
module.
Since providing a more specific search string should result in getting
back more specific results, the previous behavior was not intuitive.
Test scenario:
a) In sysprefs, do a search with partial match (e.g. intranetcolor)
-> Result shows one entry: intranetcolorstylesheet
b) Do an exact search. e.g. intranetcolorstylesheet
-> Result shows all Staff Client preferences
Apply patch, test again. Now b) behaves like a).
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The template for adding/editing Z39.50 servers shows the same title,
breadcrumbs, etc. for add and edit operations. This patch creates
separate text for each case.
To test, try both adding and editing a Z39.50 server. The page title,
breadcrumb, and heading should correctly reflect the operation you
perform.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely and all strings are translatable.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The prototype is not consistent, GetBranchCategory should return only 1 result
and GetBranchCategories should not have a categorycode argument.
This patch fixes that.
Test plan:
1/ Try to add/remove/modify a library.
2/ Add some groups
3/ Add these groups to a library
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- Remove an old DHTMLcalendar_dateformat variable
- Add SUGGEST_STATUS to the "Koha system categories"
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
- the dateformat value is send to all templates (from
C4::Auth::get_template_and_user)
- remove all assignment of dateformat in all .pl files
- Remove "all" occurrences (those I found!) of dateformat_*
From now the only way to get the date format is a string comparaison
(dateformat == "metric")
Checked with the command:
git grep "\(dateformat_us\|dateformat_metric\|dateformat_iso\)" | grep
-v translator
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tested all the datepickers I could find, looks good.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Decodes searchfield.
Test plan:
Look for e accent in preferences. You should no longer see converted chars.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works ok, no errors.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In current implementation (mostly commented out in this patch)
uses heuristic to guess which strings need decoding from utf-8
to binary representation and doesn't support utf-8 characters
in templates and has problems with utf-8 data from database.
With this changes, Koha perl code always uses utf-8 encoding
correctly. All incomming data from database is allready
correctly marked as utf-8, and decoding of utf8 is required
only from Zebra and XSLT transfers which don't set utf-8 flag
correctly.
For output, standard perl :encoding(utf8) handler is used
so it also removes various "wide character" warnings as side-effect.
Test scenario:
1. make sure that you have utf-8 characters in your biblio
records, patrons, categories etc.
2. try to search records on intranet and opac which contain
utf-8 characters
3. install language which has utf-8 characters, e.g. uk-UA
dpavlin@koha-dev:/srv/koha/misc/translator(bug_6554) $
PERL5LIB=/srv/koha/ perl translate install uk-UA
4. switch language to uk-UA and verify that templates
display correctly
5. test search and Z39.50 search and verify that caracters
are correct
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I followed the test plan, adding utf-8 characters to library names,
patron categories, titles, and authorized values. I tried the uk-UA
translation and everything looked good.
When performing Z39.50 searches for titles containing utf-8 characters I
got results which were still occasionally contaminated with dummy
characters [?] but I assume this is Z39.50's fault not the patch's.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Already signed, add mine.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds the ability to add groups to the library select
pulldown on the opac, if it is enabled.
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Go to Administration › Libraries and groups
4) Create a new group, or edit an existing one
5) Ensure the 'Show in search pulldown' checkbox is checked
6) Save the group
7) Enable OpacAddMastheadLibraryPulldown if it is not already enabled
8) Load the OPAC, try the group search from the libraries pulldown menu
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Yes! Now this works, and well.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Renew an issue for a number of days (filled in the issuing rules).
Test if rules work for any i[item]types and if there is no regression.
- new column issuingrules.renewalperiod
- remove all occurrences of an already removed syspref (globalDueDate)
- remove an unused routine (Overdues::GetIssuingRules)
How it works:
- On existing installations, the issuingrules.renewalperiod =
issuingrules.loanlength. So the behaviour is the same before and after
this patch.
- when you add a rule, you can choose a renewal period (the unit value
is the issuingrules.unit). So you can have a renewal period in hours
or days.
- The default value for the renewal period is 21 days (same as
loanlength)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test comments on second patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Removes a lot of code that was needed to handle prefs the old way.
Test plan:
Goto Local use preferences. Do you see some local preferences?
Add a new pref, edit and delete it.
Modify the url to systempreferences.pl?tab=OPAC or tab=log. You should only see
a short message.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: Remove the $sth->finish statements
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds a new menu for vendor-related pages in which
vendor related "views" can be linked to: baskets, basket groups,
contracts, invoices, uncertain prices.
The acquisitions toolbar is pared down to vendor-related actions:
New basket, contract, or vendor; edit vendor, delete vendor,
receive shipment.
Other small improvements have been made to other pages: corrections
to breadcrumbs and title tags, adding useful links betweeen pages.
Vendor menu and toolbar are added to booksellers.pl
when there is only one "search result" (i.e. a vendor id is passed).
- Menu appears when booksellerid variable is present
- Redundant heading removed
- Additional variables added to enable proper display of the toolbar
- Revision corrects broken links pointed out by QA.
- Revision adds check of existing baskets and subscriptions as a
condition on display of the vendor delete button.
TODO: Add coverage of Basket groups page.
To test, navigate Acquisitions pages and test as many links and buttons
as you can, confirming that nothing is broken on vendor pages, invoice
pages, contract pages, uncertain price pages, etc.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass - I like this very much!
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Tests done:
1) New toolbar - vendor search
- no results = button to create new vendor shows
- 1 result = additional new options show
- more than one result = button to create new vendor shows
2) Vendor views
- acq toolbar consistent with 1 result in vendor search
- new tabs on the left
- checked all links have the needed parameters and work correctly
3) New toolbar - different pages
- Toolbar is formatted consistently
- Delete vendor shows only up when it should - no baskets or
subscriptions
- Links work correctly
Works nicely, great groundwork for further improvements.
TODO Add new toolbar to (new) invoices page.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Allow the value of a OAI set mapping to be 0 / empty. Delete the mapping if field or subfield are empty.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Now it is possible to add a value == 0 or an empty string.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch does three things:
- Makes admin/z3950servers.pl create one variable for encoding,
not one variable for each encoding
- Makes the template create encoding options from a list
- Adds ISO 8859-1 to the list of available encodings
See the bug for a lengthier description
To test:
- Apply the patch
- Edit one Z39.50 server several times, choosing each available
encoding in turn
- Check that for each encoding, the correct encoding is shown both in
the list of Z39.50 servers and in the dropdown on the edit screen
Comment: Works as described, no errors.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
- the dateformat value is send to all templates (from
C4::Auth::get_template_and_user)
- remove all assignment of dateformat in all .pl files
- the DHTMLcalendar_dateformat variable is unused
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed conflicts:
- opac/sco/sco-main.pl
- reports/acquisitions_stats.pl
- tools/cleanborrowers.pl
All tests pass, perlcritic problems appeared in some files
before and after these patches were applied.
Checked sorting in following pages:
- acqui/addorderiso2709.tt - list of staged imports in acq
- acqui/histsearch.tt - sorting of dates in acq search result list
- acqui/invoices.tt - billing date in list of invoices in acq
- acqui/lateorders.tt - list of late orders in acq
- acqui/ordered.tt - ordered titles and estimated costs for a fund
- acqui/parcels.tt - receive shipment page
- acqui/spent.tt - received titles and actual costs for a fund
...
- serials-search.tt - subscription search result list
...
- opac/sco/sco-main.tt - due dates in list of checked out items
- reports/acquisitions-stats.tt - date searches, display of dates
- tools/cleanborrowers.tt
- tools.holidays.tt - different views of dates library is closed,
adding dates
Checked dates display according to system preference everywhere and
searching, entering dates etc. still worked as expected.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Try to delete an authorized value. if you don't get any error, this
patch works.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Enabled debug, tried with and without Plack, works fine for both.
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Works as advertised. Follows coding guidelines.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch use DataTable, see BUG|BZ 6836
- css/datatables.css
- lib/jquery/plugins/jquery.dataTables.min.js
- js/datatables.js
http://bugs.koha-community.org/show_bug.cgi?id=7167
Bug 7167 follow-up
Major changes:
* creating database tables for update on the fly, the 1st time the update script is called
* version is checked on mainpage.pl (and here only). If syspref Version differ from kohaversion.pl, the old updatedatabase is launched. If there are updates missing from new mechanism, the updatedatabase page is reached
* kohaversion check on each page is now useless in Auth.pm, removed dead code
* Updated installer: at the end of the process, retrieve all updates and automatically mark them "OK", as they're included in installer
Minor changes:
* adding copyright
* adding poddoc
* updating a warning, for better clarity
* switching from $$var to $var->
* small TT glitch fixed in updatedatabase.tt
* about.pl now returns the Version systempreference PLUS all the patches that have been applied
Bug 7167 follow-up perlcritic & numbers display & partial apply depending on DEBUG
* add use strict to updatedatabase, that is now perlcritic compliant
* partial apply of DB revs is now managed by DEBUG env variable = if DEBUG=0, the user can just apply every DBrev. If DEBUG=1, we're in a dev env, the user know has the option to apply DBrevs one by one
Display:
* in updatedatabase, small spelling changes
* in about.pl, remove 0 just after . (3.06.01 is displayed as 3.6.1)
* improve the display of applied numbers on about.pl
- before this patch, if you have N, N+1, N+2, N+3 and N+10 DB rev applied, about was displaying : , N+1 / N+2 / N+3 / N+10
- after this patch you have N......N+3 / N+10
* add ORDER BY into list_versions_already_knows to have number retrieved in the same order whatever the order they are applied
http://bugs.koha-community.org/show_bug.cgi?id=6679
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Improve the update.pl script
* Added CLI options to update.pl
* Call update.pl from the installer.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Now, we check versions on mainpage.pl and after login
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Reimplementing Marcel's suggestions & fixes
* Fixing the bugguy old version check (that was made against 3.0900000 instead of 3.0900027 -the last current kohaversion number
* in the CLI script, if there is nothing to report, just say it
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Bug 7167: Remove check_coherency
As suggested by Katrin, we've removed the call to check_coherency. It intended to provide readable comments when some SQL was wrong. Removing this sub result in the SQL error being displayed. That's OK because the sysadmin or the developer can google the error, understand it, then fix it.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Changing in .sql parsing
We first split on delimiter and then extract comments. You can now put
\n for delimiter comments.
ex:
DELIMITER ;
-- this is a comment
SELECT * FROM my_table;
-- another comment
Before this patch, we had to write:
DELIMITER ;
-- this is a comment;
SELECT * FROM my_table;
-- another comment;
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Add .pl and .sql examples
Those files are in version directory, so will never be executed by the updater
If you want to provide an update, do it in a 3.09/ directory (if your update is expected for 3.10 version)
Note that the updater use a md5sum checker. So, if the same update is in 2 different places, it will be detected. That will be handy for changes made on both stable and master: a library running stable will get the update when updating. When upgrading to the next major release, Koha will detect the patch has already been applied, and no error will be thrown. With the previous mechanism, a DBRev ported to stable was re-executed when upgrading to master, resulting in a nasty (but usually harmless) error message
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Improve display + factorize get_queries
Despite it's size, this patch is dealing with display questions only:
* The text "comments" and "queries" was hardcoded in ajax-updatedb-getinfo.pl script. It has been replaced by a JSON call, returning 2 separate values, "comments:" and "queries:" is now in the template, making it translatable
* Some minor tweak in the display (like putting things in bold, displaying OK in green, warnings in yellow and KO in red)
* Reordering the column headers for more readability:
* Status column is merged with availability, column is after status
* Status/availability terms more clear: "Not applied" instead of "unknown", "Applied and OK", "Applied and failed", "Applied and forced" are the 3 other statuses
* Removed one click to display comments on DBREv not yet applied: before the patch, one had to click "Show details", then "Get comments", now, "Get comments" is enough
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: FIX typos & moving a script to a proper place
* renamed availables to available
* renamed already_knows to already_applied
* fixed FSF & copyright headers
* removing a "use strict" because we already had use Modern::Perl
* fixed a tiny typo in about.tt
* moving update.pl to misc/bin because it's a CLI script
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Add dependency File::Find::Rule
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: We want to execute non-numeric version with the -all option
Dealing with Marcel comment 100:
> Note that the current code around line 52/53 does not
> handle that correctly:
> Argument "\x{74}\x{65}..." isn't numeric in numeric ge (>=) at
> installer/data/mysql/update.pl line 52.
Now, a non-numeric DBRev will be applied if you provide the --all parameter, without throwing the error
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167 reindentation & removing dead code
* The if (! defined $ENV{PERL5LIB}... block was wrongly intented
* The 3 lines running update.pl are useless: the update (new mechanism) is run from admin/updatedatabase.pl script. This part of install.pl is run only when you have "old style" DB revisions.
Summary:
* old mechanism = it's run as previously, by reaching the installer/install.pl?step=3 page, that applies all revisions
* new mechanism = when you log-in or reach mainpage.pl, you reach admin/updatedatabase.pl, where you can see what will be run, and run it
Tiny side effect = the check for old mechanism is now done *after* authentification (thus it's not done on each page call). It means that the user will have to enter login/password twice :
* first to log-in to Koha
* second to run installer/updatedatabase.pl?step=3
As the old mechanism is deprecated, we can expect this will happend only a few time in the history of a setup, it's not a big deal.
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Don't raise an error in routine TableExists
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: FIX merge
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Add .pl and .sql examples
Those files are in version directory, so will never be executed by the updater
If you want to provide an update, do it in a 3.09/ directory (if your update is expected for 3.10 version)
Note that the updater use a md5sum checker. So, if the same update is in 2 different places, it will be detected. That will be handy for changes made on both stable and master: a library running stable will get the update when updating. When upgrading to the next major release, Koha will detect the patch has already been applied, and no error will be thrown. With the previous mechanism, a DBRev ported to stable was re-executed when upgrading to master, resulting in a nasty (but usually harmless) error message
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167 follow-up fix POD syntax to please koha-qa.pl
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In a librairies network, we would like to declare specific values just
for one (or more) library.
Here we implement the ability to associate categories, patron attributes
types and/or authorised_values with librairies (branches).
This patch adds 3 new association tables:
- categories_branches ( association table between categories and branches )
- authorised_values_branches ( association table between
authorised_values and branches )
- borrower_attribute_types_branches (association table between
borrower_attribute_types and branches )
Plan test:
- Create (or modify) categories, patron attributes and
authorised_values and link it with one (or more) library.
- Set one of these librairies
- Go to one of the multiple pages where this specific value must be displayed
and check that it does appear.
- Set a library not concerned.
- Check on the same pages this value is doest not appear.
A page list:
cataloguing/addbiblio.pl
cataloguing/additems.pl
members/members-home.pl
members/memberentry.pl
acqui/neworderempty.pl
tools/modborrowers.pl
and others :)
Please say me if filters don't work on some pages.
Signed-off-by: Delaye Stephane <stephane.delaye@biblibre.com>
Signed-off-by: Koha Team Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Melia Meggs <melia@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Clicking on Local use tab in system preferences results in warning in log file:
systempreferences.pl: Use of uninitialized value in length at (...)/admin/systempreferences.pl line 456
Reason: content field "value" in table "systempreferences" can be NULL (and is tested for length).
Added test for "defined" at to places.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Changed two lines similar to:
unless (C4::Context->config('demo') == 1) {
into lines similar to:
unless (C4::Context->config('demo')) {
By removing the == 1, undefined = false without an error. The
value of demo is supposedly set by a koha-conf.xml variable,
but there is very little documentation on this "demo mode"
beyond the set it to 1 in koha conf for demo mode. Also, demo
doesn't exist in the default koha-conf.xml file generated.
So anyone who knows to create it, will likely create it the
proper way and with the proper value.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
No value for $date was getting passed to the format_date function.
This patch changes the way the timestamp is passed.
Signed-off-by: Melia Meggs <melia@test.bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Changed declartion from:
my $op = $input->param('op');
to
my $op = $input->param('op') || q{};
in order to give an empty string default preventing error
logs from filling needlessly.
Signed-off-by: Marc Veron <veron@veron.ch>
The patch removes warnings like:
Use of uninitialized value $op in string eq at...
However there is one more warning, but it is not related to $op (addressed by this patch):
smart-rules.pl: Use of uninitialized value in string ne at .../admin/smart-rules.pl line 388.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
don't close the DBH handler, because under plack this cause a lot of problem
and in CGI mode, closing the dbh handler is useless
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
When working with hierarchical subject headings, it is sometimes helpful
to do a search for all records with a specific subject, plus
broader/narrower/related subjects. This patch adds a suggestion plugin for
these "exploded" subject searches to Koha. Note that this patch depends on
both bug 8211 AND bug 8209.
To test (NOTE: this test plan covers both 8211 and 8726):
1) Make sure you have a bunch of hierarchical subjects. I created
geographical subjects for "Arizona," "United States," and "Phoenix,"
and linked them together using 551s, and made sure I had a half
dozen records linking to each (but not all to all three).
2) Do a search for su-br:Arizona (or choose "Subject and broader terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona" and the
records with the subject "United States"
3) Do a search for su-na:Arizona (or choose "Subject and narrower terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona" and the
records with the subject "Phoenix"
4) Do a search for su-rl:Arizona (or choose "Subject and related terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona," the
records with the subject "United States," and the records with the
subject "Phoenix"
5) Ensure that other searches still work (keyword, subject, ccl,
whatever)
6) Use "Did you mean?" page in admin section to enable ExplodedTerms
plugin
7) Do a keyword search on the OPAC, confirm that searching for exploded
terms is suggested.
8) Do a subject search on the OPAC, confirm that searching for exploded
terms is suggested.
9) Do a non-keyword, non-subject search on the OPAC, confirm that
searching for exploded terms is NOT suggested.
10) Disable ExplodedTerms plugin and enable AuthorityFile plugin.
11) Do search on OPAC, confirm suggestions are made from authority file.
12) Sign off
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Split into two patches. This patch includes only the functionality.
This bug enables accented/diacritic system preference text to be matched
when searching for sysprefs.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
* Add the code necessary to handle authorities with matching rules and
import batches.
* Update all the scripts that use the matcher and import batch code
to use the new API.
* Add authority records to the matching rules interface in the staff
client.
http://bugs.koha-community.org/show_bug.cgi?id=2060
Signed-off-by: Elliott Davis <elliott@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on latest master 11 September 2012
Budget periods are now divided into two tabs : active and inactive
budget periods.
The original author of this patch is Julian Maurice
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Michael Davis <m.r.davis@cranfield.ac.uk>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This should make saved reports more manageable.
Group/Subgroup hierarchy is stored in authorised_values,
categories REPORT_GROUP and REPORT_SUBGROUP, connected by
REPORT_SUBGROUP.lib_opac -> REPORT_GROUP.authorised_value
Database changes:
* authorised_values: expanded category to 16 chars
* created default set of REPORT_GROUP authorised values to match
hardcoded report areas
* reports_dictionary: replaced area int with report_area text, converted
values
* saved_sql: added report_area, report_group and report_subgroup;
report_area is not currently used, saved for the record
C4/Reports/Guided.pm:
* Replaced Area numeric values with the mnemonic codes
* get_report_areas(): returns hardcoded areas list
* created get_report_areas(): returns full hierarchy (groups with belonging
subgroups)
* save_report(): changed iterface, accepts fields hashref as input
* update_sql(): changed iterface, accepts id and fields hashref as input
* get_saved_reports():]
- join to authorised_values to pick group and subgroup name
- accept group and subgroup filter params
* get_saved_report():
- changed iterface, return record hashref
- join to authorised_values to pick group and subgroup name
* build_authorised_value_list(): new sub, moved code from
reports/guided_reports.pl
* Updated interfaces in:
cronjobs/runreport.pl, svc/report, opac/svc/report: get_saved_report()
reports/dictionary.pl: get_report_areas()
reports/guided_reports.pl
reports/guided_reports_start.tt:
* Reports list:
- added group/subgroup filter
- display area/group/subgroup for the reports
* Create report wizard:
- carry area to the end
- select group and subgroup when saving the report; group defaults to area,
useful when report groups match areas
* Update report and Create from SQL: added group/subgroup
* Amended reports/guided_reports.pl accordingly
Conflicts:
C4/Reports/Guided.pm
admin/authorised_values.pl
installer/data/mysql/kohastructure.sql
installer/data/mysql/updatedatabase.pl
koha-tmpl/intranet-tmpl/prog/en/modules/reports/dictionary.tmpl
koha-tmpl/intranet-tmpl/prog/en/modules/reports/guided_reports_start.tmpl
misc/cronjobs/runreport.pl
reports/dictionary.pl
reports/guided_reports.pl
Signed-off-by: Delaye Stephane <stephane.delaye@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
In order to solve the issue of IndependantBranches being incompatible with HomeOrHoldingBranchReturn,
this patch changes the mechanism by which the question "can I return this material here?" is answered. Before,
the conditions were "if IndependantBranches is on, and this branch isn't HomeOrHoldingBranchReturn for the item,
then no, otherwise yes". Now, the question is answered by consulting CanBookBeReturned (new subroutine)
New system preference: AllowReturnToBranch
Possible values:
- anywhere (default for new installs, and for existing systems with IndependantBranches turned off)
- homebranch
- holdingbranch (which is also the issuing branch in all normal circumstances)
- homeorholdingbranch (default for existing systems with IndependantBranches turned on)
New subroutine: CanBookBeReturned
Input: $item hash (from GetItems), and $branchcode
Output: 0 or 1 to indicate "allowed" or not, and an optional message if not allowed. Message is the 'correct' branchcode
to return the material to
To Test:
1. Install patch and new syspref
2. Check that default value of the preference:
- if IndependantBranches was OFF at install time, should be 'anywhere'
- if IndependantBranches was ON at install time, should be 'homeorholdingbranch'
Case: 'anywhere'
1. Checkout a Library A book at Library A. Return at Library A should be successful
2. Repeat step 1, returning to Library B. Return should be successful
3. Checkout a Library A book at Library B. Return to A should be successful
4. Repeat step 3 with Library B and Library C
Case: 'homebranch'
1. Checkout a Library A book at Library A. Return at Library A should be successful
2. Repeat step 1, returning to Library B. Return should FAIL (returning message to return at A)
3. Checkout a Library A book at Library B. Return to Library A should be successful
4. Repeat step 3 with Library B and Library C. Both should FAIL (returning message to return at A)
Case: 'holdingbranch'
1. Checkout a Library A book at Library A. Return at Library A should be successful
2. Repeat step 1, returning to Library B. Return should FAIL (returning message to return at A)
3. Checkout a Library A book at Library B. Return to A should FAIL (returning message to return at B)
4. Repeat step 3 with Library B. Return should be successful
5. Repeat step 3 with Library C. Return should FAIL (returning message to return at B)
Case: 'homeorholdingbranch'
1. Checkout a Library A book at Library A. Return at Library A should be successful
2. Repeat step 1, returning to Library B. Return should FAIL (returning message to return at A)
3. Checkout a Library A book at Library B. Return to A should be successful
4. Repeat step 3 with Library B. Return should be successful
5. Repeat step 3 with Library C. Return should FAIL (returning message to return at A)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In the Koha Administration screen, clicking
Keywords to MARC mapping triggered an uninitialized $op warning
in the koha error logs. Added a "|| q{}" to ensure it is set.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
An array boundary check was after a comparison using the array.
By changing the logic which had " and ( $j < $cnt)" to be at the
beginning "( $j < $cnt ) and ", the warning is no longer shown
in the error log.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Create transport_cost table, added UseTransportCostMatrix syspref.
transport_cost table contains branch to branch transfer
costs. These are used for filling inter-branch hold transfers.
Moved GetHoldsQueueItems() from .pl to HoldsQueue.pm
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch removes the AmazonReviews and AmazonSimilarItems
features from the OPAC and staff client. With on Amazon
feature remaining, cover images, the *AmazonEnabled preference
is also removed in favor of checking the *AmazonCoverImages
preference. Two other system preferences, AWSAccessKeyID and
AWSPrivateKey are removed as they were required only by the
removed features.
Handling of book cover images from Amazon is unchanged.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Turned on amazon covers in opac and staff client and all
worked as expected. Then tested to make sure other cover image
services still worked and they do.
Signing off.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch makes the use of opaccolorstylesheet and opaclayoutstylesheet more consistent. They may be: 1) just a file name, 2) a complete local path or 3) a full URL starting with http: for a remote css file.
This makes the syspref opacstylesheet that was only used for a remote css file obsolete.
June 20, 2012 Rebased.
July 18, 2012: Regex allows https too (thanks to Owen Leonard).
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Replaced existing MaxFine syspref logic with overduefinescap.
Repurposed MaxFine to be the overall overdue limit for all items
overdue. Implemented new MaxFine logic in UpdateFine().
Signed-off-by: Elliott Davis <elliott@bywatersolutions.com>
Tested according to Srdjan's test plan and everything worked like he said it would. I set fined equal to $2 and max fine equal to $1. When I ran the fines script for overdue items fines assessed were only $1.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
There is a flaw in C4::Members::Messaging::GetMessagingPreferences where
the system assumes that every transport will use the same letter. This
is not necessarily true. Even with the default preferences of just
'email' and 'sms', we should be able to have different letters
for each, as one has a maximum character length ( sms ) and one
does not. GetMessagingPreferences currently uses the letter code
of the last result of its query as the letter code for every transport type.
The returned data is a hashref with a key 'transport_types' that is
an array of transport_types this borrower has selected for the given
alert.
This commit modifies GetMessagingPreferences such that the the
'transport_types' array is now a hash where the name of the transport
type is now a key to the value of the letter code set for that transport
type.
It also modifies code calling GetMessagingPreferences where necessary,
and as a side benefit will correctly get the letter codes for email
and sms correctly, if they are defined differently.
http://bugs.koha-community.org/show_bug.cgi?id=4246
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
In use in production by two libraries: Middletown and Washoe
who give their sign off but don't have git to do so.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Implements support for Talking Tech I-tiva phone notification for OVERDUE, PREDUE and HOLD notifications.
Overdues respect triggers as configured for the patron's branch.
Predue and Holds notifications respect patron's messaging preference choices.
A new column for phone notification is added if the TalkingTechItivaPhoneNotification system preference is turned on
Record of phone messages being sent to patrons is added to the patron's Notices
tab; notice of success or failure can be retrieved from I-tiva.
See the TalkingTech.README for installation and set-up instructions.
Aside from the control system preference, and the necessary changes to Messaging Preferences
forms to make use of phone notifications, the bulk of the code resides in external
cronjobs.
TalkingTech_itiva_outbound.pl generates the Spec C file to send to I-tiva. Actual transmission
of the file must be handled by the system administrator.
TalkingTech_itiva_inbound.pl processes the received Results file from I-tiva. Getting the
file from I-tiva to Koha is the job of the system administrator, as well.
Both scripts have a --help option with full documentation.
The only necessary change to core Koha behavior is in C4::Letters::EnqueueLetter. The return
value was changed from 0 or 1 (successful addition of letter to message_queue or not), to the actual
insert ID of the letter. This was required by the outbound script to present a unique Transaction ID
for the notice added to the patron's record (so a 'sent' or 'failed' status could be updated). Since
the dbh and sth are not shared, and the last_insert_id() command is table-specific, this should be thread-safe.
No changes are necessary to any parts of Koha, as all usage of EnqueueLetter currently ignores the return value.
To Test:
1. Turn on TalkingTechItivaPhoneNotification system preference
2. Verify that 'phone' is now a valid notification option for patrons on both staff and OPAC side
3. Attempt to set a 'phone' preference for PREDUE or HOLD messaging; attempt should succeed
4. Set up the patron for notices to triggers:
a. include checked out items due in a range of days, including the value set up in their messaging preferences.
b. place several holds, some in position, others waiting for pickup, others in transit.
c. set the patron up to have overdues, overdue by a range of days that includes the delay values for
the patrons branch and categorycode
5. Run TalkingTech_itiva_outbound.pl --type=RESERVE --type=PREOVERDUE --type=OVERDUE --outfile=/tmp/talkingtechtest.csv
The resulting talkingtechtest.csv file should include all the items due on X days (where X is the patrons' preference),
and none of the ones due in other increments. Similarly, overdues messages should be added for each item due by a delay
value as configured; overdues of other numbers of days should be ignore. Holds that are waiting pick up or in transit should
have messages, those still pending should not.
Messages should be added to the patron's notices tab for each issue sent. Verify these messages exist, and all Notices
tokens are replaced with appropriate information.
Repeat, this time with 4c making use of the default branch overdue triggers, instead of branch-specific triggers.
To test the inbound script, create a CSV with rows in the format "<<Message_id>>","<<SUCCESS or FAIL>>"
Message ID should correspond to the final column of the talkingtechtest.csv file (the transaction id) for the message.
Primary Authorship: Ian Walls
Additional modifications: Kyle M Hall
http://bugs.koha-community.org/show_bug.cgi?id=4246
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested and in use in production by two public libraries : Middletown
and Washoe. Both have given their sign off, but don't have git to
actually sign off.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
New syspref is Choice, options being:
- None
- Priority only
- Holds number only
- Holds number and priority
Show holds count on OPAC detail
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The bug was in the numbering of the fields and subfields in the form.
The form elements for the 'new subfield' got the same numbered names and ids as
the form elements for the second subfield. (example: repeatable1)
The patch fixes the numbering to continue to the new subfield.
To test:
- Create some new subfields and check all checkbox fields save correctly
(mandatory, repeatable, is url)
- Check that other subfields' checkboxes are not changed
- Check existing subfields and newly created subfields can be edited
Signed-off-by: mveron <veron@veron.ch>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
In the z3950servers.pl order of columns which are inserted
for new server is wrong, which results in empty timeout
and encoding values when new server is added.
Test scenario:
1. Open Z39.50 server administration
2. add new server with encoding and timeout
3. save server and verify that it has encoding and timeout
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Search term was never evaluated.
Patch makes sure input param is correctly stored in the variable
and changes comparison to be case insensitive.
To test:
- Check search for fund codes (case insensitive) works
- Check search for fund code in combination with library works
The budgets to be shown can depend on your permissions.
Testing with with a superlibrarian should bring up all funds.
Also fixes warns in the logs that appeared when viewing the funds
for a budget without funds.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Funds are now searchable.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Fixes adding and editing of local use system preferences and redirects to correct
page after saving.
To test:
- Create a new local use system preference
- Edit an existing local use system preference from summary page
- Edit an existing local use system preference using 'Edit'
- Delete a local use system preference
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Fix some careless code redeclaring a variable
declaring a variable in a condition
so that these don't generate errors
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
duplicate_framework needs $dbh so we get it from C4::Context
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
scoping fixes for Variable "*" is not available errors
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
* group some attributes for a more friendly display
* allow a link between a borrower category and an attribute to display
it only for the specified category
* Attr classes filled with AV 'PA_CLASS' category (you have to create AV
with a new category 'PA_CLASS' to fill class list)
this patch add 2 fields in borrower_attribute_types :
category_code
class
Signed-off-by: Julien Sicot <julien.sicot@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
It is now possible to add a new server
The page also now complies with the bug 2505 request
(use warnings has been added, and variables declarations
corrected to prevent warnings)
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works perfectly, tested adding, editing and deleting z39.50 servers.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adds support for Floating Collections (i.e. items that don't automatically return
home when checked in at another branch) on a per branchcode/itemtype basis.
This patch adds a new column (returnbranch) to the default_circ_rules, default_branch_item_rules,
default_branch_circ_rules and branch_item_rules tables, after the 'holdsallowed' column. While
this is coded as a varchar(15), the only currently supported values are 'homebranch', 'holdingbranch',
'noreturn' and NULL.
On upgrade, the value of HomeOrHoldingBranchReturn is used to populate the global default (which is
stored in default_circ_rules.returnbranch).
To access this value, use C4::Circulation::GetBranchItemRule. This subroutine is altered to supply
an additional key, "returnbranch", containing this value (or 'homebranch' as a default). No existing
usage of GetBranchItemRule should need to be modified.
The use of HomeOrHoldingBranchReturn is removed in AddReturn to instead use this subroutine. This will
determine, on a more granular level, where the item should be transferred, after all is said and done. If
'noreturn' is specified, then the material will remain at the branch doing the checking in.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Passes prove t xt t/db_dependent
I was able to make this feature work as advertised.
As noted above, if you want a floating rule applied across all branches, adding a single default rule won't suffice, you'll need to add the rule to all branches. That issue is not related to the functioning of *this* patch however.
New sql tables:
- oai_sets: contains the list of sets, described by a spec and a name
- oai_sets_descriptions: contains a list of descriptions for each set
- oai_sets_mappings: conditions on marc fields to match for biblio to be
in a set
- oai_sets_biblios: list of biblionumbers for each set
New admin page: allow to configure sets:
- Creation, deletion, modification of spec, name and descriptions
- Define mappings which will be used for building oai sets
Implements OAI Sets in opac/oai.pl:
- ListSets, ListIdentifiers, ListRecords, GetRecord
New script misc/migration_tools/build_oai_sets.pl:
- Retrieve marcxml from all biblios and test if they belong to defined
sets. The oai_sets_biblios table is then updated accordingly
New system preference OAI-PMH:AutoUpdateSets. If on, update sets
automatically when a biblio is created or updated.
Use OPACBaseURL in oai_dc xslt
New revision updates for current master and cleans up new
instances introduced by recent commits.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
2 problems found, fixing those in follo up patches:
- late orders don't allow more than 1 order to be selected
- basketgroups: 'Edit vendor' does the same as 'Manage orders'
http://bugs.koha-community.org/show_bug.cgi?id=6943
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
- all new javascript alerts have translations markers _()
- hierarchies and permissions were copied correctly
Possible enhancements:
- make it possible to move orders from old to new funds
- make it possible to change description while copying, saving 1 additional
step
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
use encoding(UTF-8) rather than utf-8 for stricter
encoding
Marking output as ':utf8' only flags the data as utf8
using :encoding(UTF-8) also checks it as valid utf-8
see binmode in perlfunc for more details
In accordance with the robustness principle input
filehandles have not been changed as code may make
the undocumented assumption that invalid utf-8 is present
in the imput
Fixes errors reported by t/00-testcritic.t
Where feasable some filehandles have been made lexical rather than
reusing global filehandle vars
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with example from bug and by deleting parts of it:
cardnumber|surname|firstname|title|othernames|initials|streetnumber|streettype|address|address2|city|state|zipcode|country|email|phone|mobile|fax|emailpro|phonepro|B_streetnumber|B_streettype|B_address|B_address2|B_city|B_state|B_zipcode|B_country|B_email|B_phone|dateofbirth|branchcode|categorycode|dateenrolled|dateexpiry|gonenoaddress|lost|debarred|contactname|contactfirstname|contacttitle|borrowernotes|relationship|sex|password|userid|opacnote|contactnote|sort1|sort2|altcontactfirstname|altcontactsurname|altcontactaddress1|altcontactaddress2|altcontactaddress3|altcontactstate|altcontactzipcode|altcontactcountry|altcontactphone
Note: This only affects the edit screen, not the patron detail tab.
A nice enhancement would be to make this page follow the system preference too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
QA comments on Bugzilla. Passing QA.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
* DBrev defined
* small improvement suggested by Marcel added = there is now a link to the schema page on the systempreference
Adding a check for an empty value in a couple of places
which seem to always get one.
As far as I can tell these places in the script are looping
over ALL the data in the pref files, and sometimes an empty
value comes through. I wonder if this is because of a minor
syntax error in the pref file?
My correction is a stab in the dark since I haven't determined
where the empty value is actually coming from. This change
quiets the errors in the log and doesn't seem to affect
preference search results.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
No more messages in the logs. Yay!
Ran unit tests on this (t, xt/author, xt, t/db_dependent)- nothing out of the ordinary in any.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
When trying to modify the subfield "0" on a field in the
MARC subfield structure admin -> Tag xxx Subfield Constraints,
the boolean condition on liblibrarian fails for the initial "0" value.
Modified condition to allow the value "0"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Removed SearchMembers() and replaced with more generic Search()
Amended Search() to try cardnumber first
Replaced SearchMembers() calls with Search()
Replaced SELECT with Search() where appropriate
C4::SQLHelper:
- added support for '' key for search filter.
- when passing an array to filter, join with OR (rather than AND)
- added support for key => [val1, val2] in filter
- did not document - there was no input documentation to start with,
and SQLHelper should be replaced with something better anyway
Signed-off-by: Liz Rea <lrea@nekls.org>
(again - testing merge issue)
The functionality of the patch seems to be maintained with Biblibre's changes.
I tested the following:
Extended attribute searching: works
3 part name searching: works
2 part name searching: works
1 part name searching: works
From:
mainpage.pl
members-home.pl
Patron search limited by branch: Works
Patron search limited by patron category: works
Ordering by cardnumber instead of surname: works
The "Check Out" field in the masthead.
Circ Autocomplete is not reliably functional at this time, but the problem appears to predate this patch.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Code written by Edgar Fuß <ef@math.uni-bonn.de>,
Mathematisches Institut der Uniersität Bonn
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
- rebased on current master, fixed a conflict in booksellers.pl
- reworked permission checks to account for general acq permissions and
superlibrarian permission
- rephrased text of system preference (Thx to Jared Camins-Esakov)
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Passing SMS driver preference value to the template so that SMS
options can be displayed when appropriate.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Show patron attributes in the sidebar on circ and patron pages
[Edit from Owen Leonard: This patch takes changes originally in
Bug 5436 and isolates just the parts relating to display of
patron attributes. Because function for pulling patron attributes
was merged with the function for displaying address information
in SetMemberInfosInTemplate() (also found in Bug 5749), I moved
the call to GetBorrowerAttributes into the individual scripts.
That keeps the functionality relating specifically to patron
attributes separate from the proposed changes to displaying
addresses.
Because I think it's important to keep the display consistent,
I added display of patron attributes to all pages which include
the patron information sidebar.]
Rebased for compatability with bug 3489 and database documentation by
Ian Walls, 9-21-11
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Use C4::Templates::_get_template_file instead od C4::Output::_get_template_file
in preferences.pl
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
