This patch does a second search if the first had no results and was a simple single term search
We simply quote the term, rebuild the query, and rerun the search
This targets both Zebra and ES, but is more relevant for ES
To test:
0 - Have Koha running using ES
1 - Add titles your system "Ivy + Bean" "The 6:20 Man"
2 - Search for these titles without quotes - NO results under ES
3 - Search with quotes - you find them
4 - Apply patch, restart all
5 - Search again without quotes
6 - Success!
7 - Confirm search still works under Zebra
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This enhancement adds a new input above the search results allowing one to search within the results. The search
box will take a query and add it as a limit to the previous search
These patches make a slight change to the search header, passing the dropdown selection as a parameter rather thandirectly.
Searching this way is functionally equivaled to adding 'AND' with the new term to original results.
To test:
1 - Apply patch
2 - Search on staff client wiht a term that returns results
3 - Note the new 'Search within results box'
4 - Add a search term
5 - Note new results and confirm they are as expected
6 - Enable IntranetCatalogSearchPulldown and confirm the dropdown works as expected
7 - Edit your search - the reinfements appear in the limits section and can be removed
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Since EasyAnalyticalRecords pref is now in GetAnalyticsCount, remove
test in catalogue/detail.pl.
Test plan :
1) Build an item and a linked analytical record with 773$0 and $9
2) Go to record detail page
3) Enable EasyAnalyticalRecords
4) You see analytics tab and analytical count on item
5) Disable EasyAnalyticalRecords
6) You dont see analytics tab
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Remove wrong sort in staff advanced search page
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the item counts (Present|Lost) to the 'Manage bundle'
button in the catalogue details page.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds methods the the Koha::Item object for managing item
bundling operations and then exposes those methods via the REST API.
We include the new `BundleNotLoanValue` preference for setting not
for loan values when an item is added to a bundle.
Finally, we expose bundle management via the catalogue details page.
Test plan:
0) Apply patches up to this point and run the database update
1) Configuration: `BundleNotLoanValue` should have been set by the
database update and point to a newly added AV value.
2) Creating a new bundle
* Add a new bib record
* Mark the bib record as a 'collection' type by setting leader
position 7 to 'c'
* Add a new item to this bib record
* You should see a new 'Manage bundle' button available in the
'Actions' column of the Holdings table.
* Clicking 'Manage bundle' should expand the table to include a new
row directly beneath this one.
* Use the new 'Add to bundle' button that appears in this row to
trigger a modal that allows entering the barcode of items you wish
to add to the bundle
* Upon closing the modal, the bundle content table should reload and
contain your newly associated items.
* You can subsequently remove an item from a bundle using the new
'Remove' button.
3) Not for loan
* Items that have been added into a bundle should now appear as 'Not
for loan' from their original biblio record and note which bundle
they belong to.
4) Error cases
* Try adding an item that already belongs to a bundle to another
bundle: Note an error is displayed in the modal form.
5) The bundles feature can be disabled by unsetting the
`BundleNotLoanValue` system preference.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test Plan:
1) Apply the patches for this bug
2) Run updatedatabase.pl
3) Restart all the things!
4) Enable the new syspref EnableItemGroups
5) Browse to detail.pl for a record with items
6) Note the new Item Groups tab
7) Test creating, editing and deleting groups
8) On the Holdings tab, select one or more items using the checkboxes
8) Note new selection options for setting an item group for items,
and for clearing an item group for items.
9) Test adding and clearing the item group for items
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
MARC::Record and MARC::File::* modules sometimes use the position 09 of
the leader to detect encoding. A blank character means 'MARC-8' while an
'a' means 'UTF-8'.
In a UNIMARC authority this position is used to store the authority type
(see https://www.transition-bibliographique.fr/wp-content/uploads/2021/02/AIntroLabel-2004.pdf [FR]).
In this case, 'a' means 'Personal Name'.
The result is that the import will succeed for a Personal Name
authority, but it will fail for all other authority types.
Steps to reproduce:
0. Be sure to have a Koha UNIMARC instance.
1. Download the MARCXML for "Honoré de Balzac"
curl -o balzac.marcxml https://www.idref.fr/02670305X.xml
2. Verify that it's encoded in UTF-8
file balzac.marcxml
(should output "balzac.marcxml: XML 1.0 document, UTF-8 Unicode
text")
3. Go to Tools » Stage MARC for import and import balzac.marcxml with
the following settings:
Record type: Authority
Character encoding: UTF-8
Format: MARCXML
Do not touch the other settings
4. Once imported, go to the staged MARC management tool and find your
batch. Click on the authority title "Balzac Honoré de 1799-1850" to
show the MARC inside a modal window. There should be no encoding
issue.
5. Write down the imported record id (the number in column '#') and go
to the MARC authority editor. Replace all URL parameters by
'breedingid=THE_ID_YOU_WROTE_DOWN'
The URL should look like this:
/cgi-bin/koha/authorities/authorities.pl?breedingid=198
You should see no encoding issues. Do not save the record.
6. Import the batch into the catalog. Verify that the authority record
has no encoding issue.
7. Now download the MARCXML for "Athènes (Grèce)"
curl -o athènes.marcxml https://www.idref.fr/027290530.xml
8. Repeat steps 2 to 6 using athènes.marcxml file. At steps 4 and 5 you
should see encoding issues and that the position 9 of the leader was
rewritten from 'c' to 'a'. Strangely, importing this batch fix the
encoding issue, but we still lose the information in position 09 of
the leader
This patch makes use of the MARCXML representation of the record instead
of the ISO2709 representation, because, unlike
MARC::Record::new_from_usmarc, MARC::Record::new_from_xml allows us to
pass directly the encoding and the format, which prevents data to be
double encoded when position 09 of the leader is different that 'a'
Test plan:
- Follow the "steps to reproduce" above and verify that you have no
encoding issues.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If one add cover images at item's level, then biblio level, the cover images
of the items are displayed first on the main "cover slider" at the top of the page.
We should displayed biblio cover images first, then the ones for the items.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds two new sysprefs:
ComponentSortField
ComponentSortOrder
These allow the user to choose how components should be sorted when displaying on the details page
of a record, and the corresponding search for all components
This also updates our search from simple_search_compat to search_compat to allow for sorting options
Note:
Some sorting under ES is unclear - this is a separate issue to be invesitgated
Our Zebra index does not offer 'record number' sorting, I will file a bug for that
To test:
1 - Enable UseControlNumber (or not)
2 - Add some components to a record by control number or title depending on above
3 - Enable ShowComponentRecords syspref
4 - View the record that has components
5 - Note they are not sorted
6 - Apply patch, updatedatabase
7 - reload record
8 - Note components are sorted by title ascending
9 - Try different values for ComponentSortField and ComponentSortOrder
10 - Confirm sorting changes with system preferences
11 - Repeat test on staff and opac, with ES and Zebra search engines
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We not longer need to pass holdfor_cardnumber distinctly, we can just
refer to holdfor_patron.cardnumber instead. This patch does that ;P
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch update the catalogue search results page to use the
patron-title include to display patron titles for the 'Holds for' line
in results and dropdown list.
Test plan
1) Load patron account
2) Press search to hold
3) Perform a search which brings back 2+ items (e.g. 'street')
4) Note that on the search results it says: Place hold for 'firstname
(othername) surname (cardnumber)'
5) Press the Place hold button and note that the dropdown includes
"Place hold for 'firstname (othername) surname'" and "Forget
'firstname (othername) surname'"
6) Click through to an item from the results, press the 'Place hold'
button and note the dropdown includes "Place hold for 'firstname
(othername) surname'"
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
CGI param found1 should be explicitly scalar,
or else error log gets flooded with this warning:
CGI::param called in list context from
/usr/share/koha/intranet/cgi-bin/catalogue/detail.pl line 622
This patch fixes it by working with it in a scalar context.
The functionality still remains the same but warning doesn't flood
error log.
To reproduce:
1. Open any biblio (details.pl) page.
2. Check the error log and find the upper mentioned warning,
check the timestamp to ensure that it was added when you loaded the page.
3. Apply the patch.
4. Load the page again, ensure that the same warning doesn't get added
to the log file again.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan :
Display a biblio record with some MARC notes in details page and basket,
OPAC and staff
Run prove t/db_dependent/Koha/Biblio.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch uses the url parameter we created in 23475 to determine whether
we should populate the search bar or not
Note - a bookmark with this param will still populate search term with last search
To test:
1 - Search staff client for 'cat'
2 - Browse to a patrons checkouts and click on a title, or just go directly to a details page:
http://localhost:8081/cgi-bin/koha/catalogue/detail.pl?biblionumber=2850
3 - Search bar says 'cat'
4 - Apply patch
5 - Repeat 1-2
6 - Search bar is not populated
7 - Search "dalek war box set" or a term that finds a single record in your instance
8 - Search bar is populated
9 - Note url like: http://localhost:8081/cgi-bin/koha/catalogue/detail.pl?biblionumber=2850&found1=1
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
AMENDED:
We should not pass an empty list here, but just undef in order to
prevent creating a shift of elements in the hash.
To test:
1 - Find or create an invalid marc record
2 - View in staff client
3 - Note tab Descriptions(1) has no content
4 - Apply patch, reload
5 - No empty tab
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This enhancement adds the availability of an item to the item search
results (i.e. shows if checked out or not). If checked out,
shows due date in item search results. The due
date column will also show when exporting results to a CSV file.
To test:
1) Apply patch and restart services
2) Set up two items. Check out Item A to a borrower. Leave Item B as
is not checked out, and not unavailable status.
3) Go to Search -> Item search. Scroll down and notice the Availability
radio options - Ignore, and Checked out.
4) Leave the Ignore option selected and do a search so that both items show.
5) Confirm the availability and due date columns are showing at the
right end of the table. Confirm Item A says Checked out and has a due
date. Confirm Item B says available.
6) Export all result to CSV. Confirm the results show in the CSV file as
expected.
7) Go to edit your search. Select the 'Checked out' radio option for
Availability and submit the search. Confirm only Item A shows in the
results (not Item B).
Sponsored-by: Bibliotheksservice-Zentrum Baden-Württemberg (BSZ)
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds the ability to parse the current search and populate the advanced search page on the staff side accordingly.
When searching you will now have an 'Edit this search' link underneath your current search terms
A few notes:
1 - Previous selected items appear with a checkbox, unchecking 'disables' them and removes from the search
2 - Facets and unrecognized limits will appear at the end of the form under 'Other limits' - there could be future enhancement to parse there better, but I believe this is sufficient for now
3 - Previously selected branch or group selections will populate the dropdowns, only one is allowed
To test:
1 - Perform a variety of search on the staff interface
2 - Confirm the 'edit search' button appear below your search
3 - Confirm that options are retained and correctly parsed
4 - Test with library groups - you should be able to combine groups after initial search, or remove individual libraries when editing
5 - Test that selecting a goup disables the individual libraries options
QA note: Missing filters on deletion of keys form hash are false positives
https://bugs.koha-community.org/show_bug.cgi?id=26605
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
1 - Find a record in the staff catalog
2 - Edit the record
3 - In the 520 notes field, add an ASCII escape character (27 decimal, 1b hex)
On ubuntu Ctrl+Shift+u, then 1b, enter
4 - Save the record
5 - Set syspref ShowComponentRecords to 'both...'
6 - On record details: New->New child record
7 - Save the record
8 - Attempt to view the parent record in the staff client and opac
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When system preference is off, call no code related to Koha::Recalls.
Also add some missing module import.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
See recalls on Intranet
- old recalls (all inactive recalls)
- recalls queue (all active recalls) - cancel, expire, revert waiting status, multiple cancel, mark overdue
- recalls to pull (available but not yet waiting) - cancel
- recalls awaiting pickup (awaiting pickup, awaiting pickup more than RecallMaxPickUpDelay days) - expire, revert waiting status
- overdue recalls (overdue to be returned) - cancel, multiple cancel
- biblio recalls tab (all active recalls relevant to this bib) - cancel, expire, revert waiting status, mark overdue
- patron recalls tab (all active recalls relevant to this patron) - cancel, expire, revert waiting status, mark overdue
- patron recalls history tab (all recalls relevant to this patron) - cancel, expire, revert waiting status, mark overdue
- log viewer
and the general circulation of recalls
== TEST PLAN FOR RECALLS ==
ADMINISTRATION
1. Apply all patches
2. Run database updates, update schema files and confirm everything applies cleanly
3. Run tests and confirm everything passes:
t/db_dependent/Koha/Recall.t
t/db_dependent/Koha/Recalls.t
t/db_dependent/Stats.t
t/db_dependent/Circulation/CalcFine.t
t/db_dependent/Koha/Item.t
t/db_dependent/Koha/Biblio.t
t/db_dependent/Koha/Patron.t
t/db_dependent/XSLT.t
t/db_dependent/Search.t
t/db_dependent/Holds.t
t/db_dependent/Circulation/transferbook.t
t/db_dependent/Circulation.t
4. Go to Administration -> system preferences. Find the UseRecalls system preference. It should be DISABLED. Confirm RecallsMaxPickUpDelay is set to 7 by default.
5. Go to Administration -> circulation rules. Confirm there are no recalls circulation rules showing.
6. Test a few circulation flows: checking out, placing a reserve, checking in, fulfilling a reserve, etc. Confirm everything works as normal.
7. Go to Administration -> system preferences. Enable the UseRecalls system preference.
8. Go to Administration -> circulation rules. Set the following rules:
Recalls allowed (count) = 0
Recalls per record (count) = 0
On shelf recalls allowed ( If any unavailable / If all unavailable ) = If any unavailable
Recall due date interval (days) = 3
Recall overdue fine amount = (something different to your normal fine amount)
Recall pickup period (days) = 1
Throughout your testing, try with different combinations of these rules and itemtype / branchcode / categorycode. Also try with null values. Keep the circulation rules open in another tab so you can refer to and update these easily. You should also have at least one other tab open for the staff client, and a third tab open for the OPAC, for ease of testing.
9. Go to your account -> More -> Set permissions. Confirm the recalls permission is checked.
10. Set up a test user with OPAC login details (Borrower A). This could also be your own user, as long as you have OPAC login access.
11. Set up a test record (Biblio A) with at least two items (Item A and Item B) of the same item type (or an item type with the same recall circ rules).
PLACING A RECALL
12. Log in to the OPAC as Borrower A. Do a catalogue search with a term that will return multiple results, including Biblio A.
13. Click on Biblio A.
14. Notice there is a 'Place recall' button on the sidebar menu. Click this button. There will be a message saying that there are no items to recall - this is because all items are available.
15. Check out Item A to another borrower (Borrower B).
16. Refresh the 'Place recall' page. You will still NOT be able to place a recall - this is because Recalls allowed = 0 and Recalls per record = 0.
17. Edit the circulation rules to have the following values:
Recalls allowed (count) = 1
Recalls per record (count) = 1
18. Refresh the 'Place recall' page. You will now see the form to place a recall.
BIBLIO-LEVEL RECALL, NO TRANSFER
19. Place a biblio-level recall.
Pickup location: Branch A, the set branch when you are logged into the staff client
Recall not needed after (expiration date): whatever you want
Select 'recall next available item'
Click confirm
20. Confirm the recall is placed successfully. Confirm that the new due date displayed is correctly calculated to be today's date, plus 3 days (taken from the 'recall due date interval' circ rule)
21. In the staff client, look at Borrower B's account, and go to their Notices tab. Confirm they have received a 'Notification to return recalled item' notice.
22. Look at Borrower B's checkouts table. Notice the due date for their checkout has been adjusted, and there is now a note to say that the item was recalled and the due date adjusted.
23. Log in to the OPAC as Borrower B and go to your summary tab. Notice there is a note under their checkout to say the item had been recalled.
24. Log out of the OPAC and log back in as Borrower A.
25. Go to your summary tab. Confirm there is a Recalls tab with a count of 1.
26. Cancel the recall using the button. Confirm it cancels and the Recalls tab disappears.
27. Do a catalogue search with a term that will return multiple results, including Biblio A.
28. When the results load, notice there is a 'Place recall' button next to the 'Place hold' button. Click this 'Place recall' button.
29. Notice you are redirected straight to the form to place a recall.
30. Place a biblio-level recall again, following the steps in Step 19.
31. Go to your recalls history tab. Notice your first cancelled recall shows here.
32. Cancel the recall you just created, using the button. Confirm it cancels and you are redirected to your summary tab.
33. In the staff client, enable the UseCourseReserves system preference.
34. Go to the main menu, click Course Reserves.
35. Add a new course. (You may also have to define an authorised value for DEPARTMENT.)
36. Add Item A as a reserve to this course.
37. View Course Reserves in the OPAC. Click the course you just created.
38. Notice the reserve has a Recall button underneath it's 'Checked out' status. Click this button.
39. Place a biblio-level recall again, following the steps in Step 19.
40. Click the 'Place recall' link in the breadcrumbs.
41. Notice there is a message saying that you have reached the max number of recalls on this record. This is because Recalls allowed = 1 and Recalls per record = 1.
42. Edit the circulation rules to have the following values:
Recalls allowed (count) = 10
Recalls per record (count) = 5
43. Refresh the 'Place recall' page. You will now see the form to place a recall.
44. Create another test record (Biblio B) with at least one item (Item C).
45. Find this record on the OPAC and place a biblio-level recall again, following the steps in Step 19.
46. In the staff client, go to Circulation -> Old recalls. You should be able to see your two cancelled recalls.
47. Go to Circulation -> Recalls queue. Your current recalls should show here.
48. Use the 'Select all' checkbox to select all recalls.
49. Cancel the recalls using the 'Cancel selected recalls' button.
50. Go to the OPAC and place a biblio-level recall on Biblio A again, following the steps in Step 19.
51. In the staff client, check in Item A, which should still be checked out to Borrower B.
52. A box should pop-up asking you to confirm Borrower A's recall. Click ignore.
53. Click the link to go view Biblio A's details in the catalogue.
54. Click the recalls tab. Notice Borrower A's recall is displayed, and shows it is still Requested (has not been confirmed waiting).
55. Check in Item A again. This time, confirm the recall as waiting using the "Confirm recall" button.
56. Go to Borrower A's Notices tab. Confirm there is a notice "Recalled item awaiting pickup".
57. Go to Borrower A's checkouts. Notice there is a recalls tab. Confirm the recall is showing as "Ready for pickup".
58. Click the 'Actions' dropdown. Click the "Revert waiting" button. The page should show a message that the waiting status has been reverted, without reloading.
59. This time, check in Item B. The recall confirmation box should show again, because this a biblio-level recall that any recallable item under Biblio A can fill. Click the "Print slip and confirm" button.
60. Check the slip that is generated. Confirm it contains Borrower A's correct details, and the details of the recall are correct.
61. Go to Circulation -> Recalls awaiting pickup. Confirm the recall is now waiting and shows in this list.
(You could also try this with Item B having a different item type to Item A, and circ rules not allowing Item B's item type to have recalls. When checking in Item A, it should not trigger the recall box).
62. Go to Borrower A's checkouts. Check out Item B.
63. Confirm the checkout is successful and the recall is removed from the Recalls tab.
64. Go to Circulation -> Old recalls. The fulfilled recall should show.
65. Check in Item B.
BIBLIO-LEVEL RECALL, TRANSFER REQUIRED
66. Check out Item A to Borrower B.
67. Log in to the OPAC as Borrower A.
68. Find Biblio A and place a biblio-level recall.
Pickup location: Branch B, a different branch from your logged in branch. This recall will require a transfer.
Recall not needed after (expiration date): whatever you want
Select 'recall next available item'
Click confirm
69. In the staff client, check in Item A at Branch A. Notice the box that pops up shows that a transfer is required.
70. Click "confirm recall and transfer" and confirm the transfer.
71. Go to your account and click the Recalls tab.
72. Confirm the recall status now shows the item is in transit to Branch B.
73. In the drop-down top-right of your window, select 'Set library'.
74. Set your library to Branch B.
75. Go to Circulation -> Transfers to receive. Notice that the recall is showing here.
76. Click 'Cancel transfer'.
77. Go to Circulation -> Recalls queue
78. Confirm the recall status has been reverted to Requested.
79. Set your library back to Branch A.
80. Check in Item A and trigger the transfer.
81. Set your library back to Branch B.
82. Check in Item A at Branch B.
83. When the 'Recall found' box pops up, click Ignore.
84. Go to Circulation -> Recalls to pull. The recall should show here, with a button to "Cancel recall and return to: Branch A"
85. Click the button to cancel the recall.
86. Repeat Steps 66-70.
87. Check in Item A at Branch B. Confirm the recall as waiting.
88. Check out Item A to Borrower A to fulfill the recall.
89. Set your library back to Branch A and check in Item A.
ITEM-LEVEL RECALL, NO TRANSFER
90. Go to Administration -> circulation rules. Set the following rules:
On shelf recalls allowed ( If any unavailable / If all unavailable ) = If all unavailable
91. Check out Item A to Borrower B.
92. Log in to the OPAC as Borrower A and go to Biblio A.
93. Click the 'Place recall' button. Confirm there is a message that there are no items to recall. This is because On shelf recalls allowed = If all unavailable, and there is still one item (Item B) available.
94. In the staff client, edit Item B to have a withdrawn, item lost or not for loan status.
95. Refresh the 'Place recall' page. Confirm you can now see the form to place a recall.
96. Place an item-level recall.
Pickup location: Branch A.
Recall not needed after (expiration date): whatever you want
Select 'recall a specific item'
Item B will not be selectable, and Item A should be selected by default.
Click confirm
97. In the staff client, edit Item B and remove the lost or missing status.
98. Check in Item B. Confirm the recall box does not pop up, because it cannot fill the item-level recall.
99. Check in Item A. Confirm the recall as waiting.
100. Go to Circulation -> Recalls awaiting pickup
101. Expire the recall. Confirm it expires as expected.
ITEM-LEVEL RECALL, TRANSFER REQUIRED
102. Repeat steps 91 to 95.
103. Place an item-level recall.
Pickup location: Branch B, we will require a transfer.
Recall not needed after (expiration date): whatever you want
Select 'recall a specific item'
Item B will not be selectable, and Item A should be selected by default.
Click confirm
104. In the staff client, check in Item A. Confirm the recall and trigger the transfer.
105. Set your library to Branch B and check in Item A.
106. Confirm the recall as waiting.
107. Check out Item A to Borrower A and fulfill the recall.
108. Set your library back to Branch A and check in Item A.
CRONJOBS: EXPIRING RECALL
109. Check out Item A to Borrower B.
110. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
111. In your terminal, enter mysql and edit the expiration date of your recall to be before today
UPDATE recalls SET expirationdate = NOW()-2 WHERE recall_id = X;
112. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
113. Go to Borrower A's account and go to the Recalls history tab
114. Confirm the recall has been expired because the current date surpassed the specified expiration date
115. Check out Item A to Borrower B.
116. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
117. In the staff client, check in Item A and confirm the recall as waiting.
118. In your terminal, enter mysql and edit the waiting date of your recall to be before today
UPDATE recalls SET waitingdate = NOW() - interval 5 day WHERE recall_id = X;
119. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
120. Go to Borrower A's account and go to the Recalls history tab
121. Confirm the recall has been expired because the recall had been waiting for more days than the Recall pickup period
122. Go to Administration -> circulation rules. Set the following rules:
Recall pickup period (days) = 0
123. Set the RecallsMaxPickUpDelay system preference = 1.
124. Check out Item A to Borrower B.
125. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
126. In the staff client, check in Item A and confirm the recall as waiting.
127. In your terminal, enter mysql and edit the waiting date of your recall to be before today
UPDATE recalls SET waitingdate = NOW()-2 WHERE recall_id = X;
128. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
129. Go to Borrower A's account and go to the Recalls history tab
130. Confirm the recall has been expired because the recall had been waiting for more days than the RecallsMaxPickUpDelay syspref
CRONJOBS: OVERDUE RECALL
131. Check out Item A to Borrower B
132. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
133. In your terminal, enter mysql and edit the due date of the checkout to Borrower B to be before today
UPDATE issues SET date_due = NOW()-2 WHERE issue_id = X;
134. Run the overdue cronjob from within your shell
perl misc/cronjobs/recall/overdue_recalls.pl
135. Go to Circulation -> Overdue recalls
136. Confirm your recall is showing here now as the recall has been marked Overdue
CIRCULATION
137. Check in Item A.
138. When the recall box pops up, click Ignore.
139. Check out Item A to Borrower B. You should see a yellow confirmation box, saying that another borrower has recalled the item you are trying to check out.
140. Click "No don't check out" and confirm the item isn't checked out and the recall remains.
141. Repeat Step 139.
142. Click "Yes check out" and confirm the item is checked out and the recall remains.
143. When Borrower B's checkout table loads, confirm that you cannot renew or check in the item from the Checkouts table because there is a 'Recalled' link which takes you to the recalls tab for that biblio.
144. Repeat Steps 137-139.
145. Select "Cancel recall" and click "Yes check out" and confirm the item is checked out and the recall has been cancelled.
146. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
147. Check in Item A. Confirm the recall as waiting.
148. Check out Item A to Borrower B. You should see a yellow confirmation box, saying that that another borrower has recalled the item that you are trying to check out.
149. Select "Revert waiting status" and click "Yes check out" and confirm the item is checked out and the recall status has reverted to requested.
OTHER
150. In your terminal, enter mysql and edit the due date of the checkout to Borrower B to be before today
UPDATE issues SET date_due = NOW()-2 WHERE issue_id = X;
151. Go to Borrower A's recalls and click the Actions dropdown.
152. Click "Mark as overdue" and confirm the recall is marked as overdue manually.
153. Go to Tools -> Log Viewer. Check only the Recalls module, and leave all other parameters, and click Submit.
154. Confirm all of the recalls actions that have been made are correctly logged.
Note: recalls messaging preferences are introduced in Bug 23781.
The recall feature is fully documented at: https://wiki.koha-community.org/wiki/Catalyst_IT_Recalls
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
It will conflict with other ->messages methods, it's too generic.
Bug 29230 needs Koha::Patron->messages to return Koha::Patron::Messages for instance.
Test plan:
Confirm that the tests modified by this patch still pass
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
On bug 29844 we decided to remove wantarray from Koha::Objects->search.
Reviewing the difference occurrences I found some unnecessary uses of ->as_list,
where iterators should be used instead.
This patch only removes the obvious places, not the tricky ones.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
and some more...
There are lot of inconsistencies in our ->search calls. We could
simplify some of them, but not in this patch. Here we want to prevent
regressions as much as possible and so don't add unecessary changes.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 23846 added support for invalid MARCXML.
But now page details.pl fails again with software error.
This comes from several Koha::Biblio calling $self->metadata->record without eval.
Test plan :
1) Create a biblio record with invalid MARCXML (see Bug 29690)
In koha-testing-docker there is biblionumber=369
2) Go to page cgi-bin/koha/catalogue/detail.pl?biblionumber=xxx
3) You see the page with a message :
There is an error with this bibliographic record, the view may be degraded.
Error: Invalid data, cannot decode metadata object ...
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch restores the functional fixes introduced in bug 29284 and
also prevents the 'Show analytics' link from displaying when no
component parts are found and inline display is enabled.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: Fixed error with $err vs $error(s) :)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We were fetching components in the first call of XSLTParse4Display
(opac-detail around L220). And again (opac-detail around L660).
Same for catalogue/detail.pl.
Moving the XSLT block in both scripts and removing the code from
XSLT.pm which again makes the tests obsolete.
Not hiding the link when there are components. Might be helpful too.
Also fixing biblionumber in the XSLTParse4Display call for parts.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch restores the link to 'more results' should you exceed the
hard coded limit of 300 component parts.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Thanks to a comment from Andrew, I discovered that the return from
simple_search_compat actually differs depending on if you are using
ElasticSearch or Zebra. The 'results' arrayref contains MARC::Record
objects for ES and raw marc strings if you are using Zebra. This is
actually already dealt with in the misnamed new_record_from_zebra
function inside C4::Search.. so this patch simply replaces our
MARC::Record instantiation code with a call to that function.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates the display so that rather than displaying the
components using the main XSLT and then using CSS to move them into a
box on the right side for display, which causes issues with RTL records;
We instead add them in a new tab beneath the rest of the record details
alongside holdings and other details.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Bug 11175: (QA follow-up) Fixes for bug 12561
Bug 12561 changed the prototype for XSLTParse4Display so this patcha
accounts for the additional calls to that method introduced in this
patchset.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes Koha::Util::Search in preference to embedding the
search query builder in Koha::Biblio as get_analytics_query.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Bug 11175: (QA follow-up) Rename back to get_marc_components
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We can simplify the code introduced by bug 15851 by moving the
'show_analytics_link' variable assignment into C4::XSLT and thus making
the code more DRY.
Taking the code in bug 15851 as inspiration this patch also adds proper
handling for UseControlNumber vs EasyAnalytics style 773 linking and
ensures we only return analytic component parts and no other records
containing 773's.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds an eval around the call to search for analytic records
It pases a value to the template on the staff side, but logs the warning on
the opac
This seems similar to 'decoding_error' which is noted on staff side, but absent on OPAC
The eval follows the patter used during searching
To test:
1 - Add a title to catalog, with 245a:
Digger does it all (not really!)
2 - Set searchEngine preference to: Elasticsearch
3 - The record does not load
4 - Apply patch
5 - The record loads, there is a note about analytics at the top fo the record
6 - View record in opac, no note
7 - Check logs on intranet and opac, searching error is logged
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
- Create a biblio with title like "osteuropa:" or "osteuropa!"
- Go the this biblio detail pages (cgi-bin/koha/catalogue/detail.pl)
=> Error
- Apply bug 28316 and this one
- test again
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes the code from the search scripts into QueryBuilder
modules.
To test:
1 - Have a library group defined as a search group for both staff and opac
2 - Search on staff client and opac with that group limit and a single branch limit
3 - Note your results/counts
4 - Note the visuals of the search description
5 - Apply patch
6 - Repeat searches
7 - All should work as before
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In itemsearch form, the item types filter should be sorted by description.
Test plan :
1) Create several values and descriptions in item types
2) Go to itemsearch
3) See filter by item types sorts on description and not on value
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Use a hash for better readability and reusability.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates the offsets query for lost item returns displayed in
the catalogue/moredetail controller.
Test plan (Same as bug 19919)
Test plan:
1) Pay off a LOST item
2) Check for the associated display of 'Paidfor?:' on the itemdetails page
3) Writeoff a LOST item
4) Check that a 'Paidfor?:' is not displayed on the itemdetails page.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
From
commit df97814f30
Bug 15758: Koha::Libraries - Remove GetBranches
+ selected_branchcode => ( C4::Context->IsSuperLibrarian ? C4::Context->userenv : '' ),
And
- [% PROCESS options_for_libraries libraries => Branches.all() %]
+ [%# FIXME Should not we filter the libraries displayed? %]
+ [% PROCESS options_for_libraries libraries => Branches.all( selected => selected_branchcode, unfiltered => 1 ) %]
The change in the pl is wrong as it should pass C4::Context->userenv->{branch},
but prior to this commit it seems that we didn't select the logged in
library anyway.
Looks like we should remove this code but preserve the current behavior and select "All libraries".
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
