At one time it was possible to store the results of a report into the
saved_reports table.
This allowed the librarians to compare different results, from the Koha
interface.
This patch is a proof of concept and is not very polished (understood:
it cannot be pushed like that).
Test plan:
Execute the runreport.pl cronjob script with the new --store-results
option.
This will serialize into json the results and put it into the
saved_reports table.
On the "Saved report" list, the "Saved results" column is now populated
with a date (note that you can have several date for a given report).
If you click on this link, the data will be displayed in a simple table.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Barton Chittenden <barton@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds the --test option switch to the overdue_notices.pl script
so it can be ran without doing any actual action.
To test:
- Have a patron with overdue items (simulate a checkout for a past date. Note it implies
that the circ rules are defined so the patron is overdue)
- Run:
$ sudo koha-shell kohadev
koha-dev$ misc/cronjobs/overdue_notices.pl --test
=> SUCCESS: The script is ran but the patron isn't debarred and no notice messages are queued.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Barton Chittenden <barton@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch modify the delete_patrons.pl cronjob to deal with the
last_seen option.
To test it, you just have to use the --last_seen option and pass a valid
date (iso format)
Example:
perl misc/cronjobs/delete_patrons.pl --last_seen="1984-02-04" --confirm
will delete all the patrons who do not have been active since this date.
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
https://bugs.koha-community.org/show_bug.cgi?id=12276
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Incorrect method call is causing runtime error and not
retrieving the correct logdir value
Change retrieves the value correctly
To test:
1) Run edi_cron.pl, notice error
2) Apply patch and run edi_cron.pl again, should work as expected
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Note: I did not test but changes make sense.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested the A;B;C variant here. If A fails, B will run. Since we can safely
assume that A (or B) will not fail on a daily basis, this seems to be better
than running them in the wrong order every day.
As the comments on Bugzilla show, several people support this improved
(reordered) scheme and look forward to improved error handling on another
report (obviously not that simple).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The patch changes the sequence of cronjobs in the crontab example
file and in the cron.daily file of the packages.
This is why:
1) Renew automatically
... only when we can't renew, we want to
2) Calculate fines
... once the fine are calculated and charged
we can print the amount into the
3) Overdue notices
Before the change it could happen that you'd charge for an item,
that would then be renewed. Or that you'd try to print fine
amounts into the overdue notices, when they would only be
charged moments later.
To test:
- configure your system so you have items that should
- be charged with fines
- renew automatically
- configure your crontabs according to the example file
or switch the cron.daily in your package installation with
the new one
- configure your overdue notices so that one should be generated
<<items.fine>>
- Wait for the cronjobs or schedule them to run earlier
- Verify all is well and as it should be
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Remove $dbh as argument to C4::Items::DelItemCheck
and C4::Items::ItemSafeToDelete, also change all
calls to these functions throughout the codebase.
Also remove remaining reference to 'do_not_commit' in
t/db_dependent/Items_DelItemCheck.t
Fixed doubled "$$" in C4/ImportBatch.pm
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Use t::lib::TestBuilder in t/db_dependent/Items_DelItemCheck.t
Remove the option 'do_not_commit' from C4::Items::DelItemCheck.
Whitespace cleanup.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* Fix POD warning.
* Remove redundant 'use stric' and 'use warnings'
* Remove $VERSION and --version option.
* Remove --dry-run option
* Split test for --help and check for @criteria into two separate pod2usage calls,
enabling -msg on the latter.
* Fix 'target_tiems' typo.
* Test for holds on items to be deleted.
* Fix whitespace
* Fix test for holds.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
http://bugs.koha-community.org/show_bug.cgi?id=14504
Signed-off-by: Heather Braum <hbraum@nekls.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Changes the value of the "comment" column in "borrower_debarments" table
from "Restriction added by overdues process yyyy-mm-dd hh:mm:ss" to
"OVERDUE_PROCESS yyyy-mm-dd hh:mm:ss" in the overdue_notices.pl. Then in
the templates "moremember.tt", "circulation.tt", "memberentrygen.tt",
"opac-reserve.tt" and "opac-user.tt" the value of "comment" is
check, if it's an automatical comment due to overdue process it'll
write "Restriction added by overdues process yyyy-mm-dd hh:mm:ss",
then if there is a customizable comment it will be written without
modification. Like this, the comment "Restriction added by overdues
process" is written in the po files and can be translated later.
To test:
1) create a patron with automatical restriction due to overdue process;
2) apply patch;
3) run misc/cronjobs/overdue_notices.pl;
4) verify if the comment "Restriction added by overdues process" is well
written and translatable on the following page :
- opac patron home page (opac-user.tt);
- opac item reservation page (opac-reserve.tt);
- pro patron page (moremember.tt);
- reservation item for a patron (circulation.tt, memberentrygen.tt);
5) try to translate the comment in po files;
6) sign off.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
s/sitemaper/sitemapper/
Test plan:
Run t/db_dependent/Sitemapper.t
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It would be very helpful if the cleanup_database.pl script had the
ability to delete holidays from the special_holidays table there were
older than a given number of days in the past.
Test Plan:
1) Apply this patch
2) Create some unique holidays in the past of varying ages
3) Test the new switch '--unique-holidays DAYS' for cleanup_database.pl
4) Verify only holidays older then the specified number of days are removed
NOTE: The language 'unique holdays' is used in the interface to match
it's use in the staff web interface.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a letter parameter to the cron job membership_expiry.
It is used to substitute the default notice by another one.
This could be handy if you e.g. send a reminder after the first notice.
In any case, it allows for more flexibility.
Apart from this new parameter, this patch removes the sub parse_letter from
the code. The call to GetPreparedLetter is moved to the for loop and the
call to getletter is removed (no longer needed). If there is no letter
found, the Letter module already warns you. So we just exit the loop.
Test plan:
[1] Run membership_expiry.pl -c -n -v -let NOT_EXIST
Check if you see a warning (coming from Letters.pm)
[2] Check if you have some soon expiring patrons or add before/after
parameter to include some.
Run membership_expiry.pl -c -n -v [-before ?] [-after ?]
[3] Create a new notice MEMBERSHIP2. Copy the text from the original notice
and make some adjustments.
[4] Run membership_expiry.pl -c -v -let MEMBERSHIP2 [-before ?] [-after ?].
Be aware that this call generates email messages.
Verify that the email contained the adjusted text.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
On top of Bug 14834
Work as described, tested using '-n' to see messages on terminal, e.g.
membership_expiry.pl -v -n -c -before 3 -branch BC -after 2 --letter MEMEXP2
No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds three parameters to the cron job: -before and -after, and
-branch.
You can run the cronjob now in an adjusted frequency: say once a week with
before 6 or after 6 (not both together). If your pref is set to 14, running
before=6 will include expiries from 8 days to 14 days ahead. When you
use after=6, you would include 14 days to 20 days ahead, etc.
You could also rerun the job of yesterday by setting before=1 and after=-1;
this could help in case of problem recovery.
Obviously, the branch parameter can be used as a filter.
NOTE: Why are these parameters passed only via the command line?
Well, obviously the branch parameter is not suitable for a pref.
The before/after parameter allows you to handle expiry mails different from
the normal scheme or could be used in some sort of recovery. In those cases
it will be more practical to use a command line parameter than editing a
pref.
NOTE: The unit test has been adjusted for the above reasons, but I also
added some lines to let existing expires not interfere with the added
borrowers by an additional count and using the branchcode parameter.
Test plan:
[1] Run the adjusted unit test GetUpcomingMembershipExpires.t
[2] Set the expiry date for patron A to now+16 (with pref 14).
Set the expiry date for patron B to now+11.
[3] Run the cronjob without range. You should not see A and B.
[4] Run the cronjob with before 3. You should see patron B.
[5] Run the cronjob with before 3 and after 2. You should see A and B.
[6] Repeat step 5 with a branchcode that does not exist. No patrons.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described following test plan.
Test pass
No errors
New parameters work with one (-) or two(--) dashes, no problem
with that but convention suggest that 'long' options use two-dashes.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch tries to make the code more readable using Koha::Calendar
instead of deprecated C4::Calendar and Date::Calc
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
From commit 581759e985
Bug 14133: Print notices should be generated with the print
template
"""
IMPORTANT NOTE: This test plan does not take into account the notices
generated for the staff ("These messages were not sent directly to the
patrons."). However the behavior will also change, the print template
will be used in all cases. Is it what we want?
"""
Yes, it is what we want. But if the print template does not exist, the
notice is not generated, we'd like to get the email template instead.
Test plan:
- Remove the print template for the letter you use for overdues
- Define an overdue rule to send an email
- Remove the email address for the patron which has overdues
- Execute the overdue_notices script
The staff should get an email notice and a print notice (using the
email template) should be generated for the patron
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Regression introduced by bug 14133, see but 14133 comment 13.
Test plan:
Without this patch applied, if a patron cannot be notified (no email
address or sms number), the print notice generated for the library was
not.
With this patch applied, the print notice should be generated using the
print template
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Koha's EDIFACT module works great for many European vendors,
but does not work will for US vendors, which have a much different
interpretation of 'standard'. In fact, each vendor may require
different arrangements of values in EDIFACT messages. It would be
impossible to encompass all these requirements within Koha's EDIFACT
module itself. Instead, we should allow the module to be pluggable, so
versions of the module can be developed for vendors that require EDIFACT
messages that don't conform to the standard set by Koha's EDIFACT
module.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) Enable Koha plugins
4) Install the Edifact stub plugin available at
https://github.com/bywatersolutions/koha-plugin-edifact-stub
5) Edit the EDI Vendor account, assign the plugin to a Vendor EDI account
6) Test EDI functionality ( ORDER, INVOICE ), there should be no errors
or changes to the EDIFACT message input or output
Signed-off-by: Jason DeShaw <JDeShaw@cityoffargo.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Bug 9006 changed the api for retrieving config values
from C4::Context after the removal of Autoload
This changes the syntax used to retrieve logdir to reflect
the correct syntax
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Add support for processing incoming Edifact Quotes, Invoices
and order responses and generating and transmission of
Edifact Orders.
Basic workflow is that an incoming quote generates an aquisition
basket in Koha, with each line corresponding to an order record
The user can then generate an edifact order from this (or another)
basket, which is transferred to the vendor's site
The supplier generates an invoice on despatch and this will
result in corresponding invoices being generated in Koha
The orderlines on the invoice are receipted automatically.
We also support order response messages. This may include
simple order acknowledgements, supplier reports/amendments
on availability. Cancellation messages cause the koha order
to be cancelled, other messages are recorded against the order
Which messages are to be supported/processed is specifiable on a
vendor by vendor basis via the admin screens
You can also specify auto order i.e. to generate orders from quotes
without user intervention - This reflects existing
workflows where most work is done on the suppliers website
then generating a dummy quote
Received messages are stored in the edifact_messages table
and the original can be viewed via the online
Database changes are in installer/data/mysql/atomicchanges/edifact.sql
Note new perl dependencies:
Net::SFTP:Foreign
Text::Unidecode
Signed-off-by: Paul Johnson <p.johnson@staffs.ac.uk>
Signed-off-by: Sally Healey <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Rename not_borrowered_since to not_borrowed_since
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
perl -p -i -e 's/^.*set the version for version checking.*\n//' **/*.pm
+ manual adjustements
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
pod2usage will exit with the status given in parameter.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To test:
With UsageStats syspref set to No:
* run misc/cronjobs/share_usage_with_koha_community.pl
(without -q)
- "The UsageStats system preference is not set." message
with usage info should be output
* run misc/cronjobs/share_usage_with_koha_community.pl -q
- the output should be quiet
NOTE: See comment #7.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This followup fixes a tiny mistake in the script POD.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Since bug 5010 was pushed, OPACBaseURL already contains the protocol. The
sitemap.pl script was written before this was pushed, and thus still concatenates
http:// in front of OPACBaseURL.
This patch removes this behaviour.
To test:
- Have OPACBaseURL set to (say) http://myopac.com
- Run the sitemap.pl script without specifying the --url param
=> FAIL: Notice URLs look like http://http://myopac.com/bib... in the sitemap files.
- Apply the patch
- Run the sitemap.pl script without specifying the --url param
=> SUCCESS: Notice URLs look correctly like http://myopac.com/bib...
- Sign off :-D
Regards
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The 'borrower' should not be used anymore, especially for new code.
This patch move files and rename variables newly pushed (i.e. in the Koha
namespace).
Test plan:
1/
git grep Koha::Borrower
should not return code in use.
2/
Prove the different modified test files
3/ Do some clicks in the member^Wpatron module to be sure there is not
an obvious error.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. Tested with Circulation, Members/Patrons, Discharge,
Restrictions modules and the must common functionalities
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Most part of the code here is unnecessary complex. We should selected
the currency if it is selected, that's all :)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch adds:
- a new DB field items.new.
- a new page to configure this new status
(tools/toggle_new_status.pl).
- a new cronjob script (misc/cronjobs/automatic_item_modification_by_age.pl
was misc/cronjob/toggle_new_status.pl)
Why this status is useful for some libraries ?
The use cases are:
- to know easily what are the new items (with a simple sql query).
- to display an icon in the search results.
- issuing rules can be adapt for new items. Automatically (using the
cronjob script), the status change (depending the configuration) and
the item can be issued, for example.
- a RSS/Atom feeds can be created on these new items.
Test plan:
- log in with a librarian having the tools > items_batchmod permission.
- navigate to Home > Tools > Automatic item modifications by age (was: Toggle new status)
- click on the edit button
- there are 3 "blocks":
* duration: the duration during an item is considered as new.
* conditions: the status will change only if the conditions are meet.
* substitutions: if there is no substitution, no action will be done.
You can add some change to apply to the matching items.
E.g. ccode=3
new=''
If the value is an empty string (in other words, the input does not
contain anything), the field will be deleted.
You can create as many rules as you want.
- test the interface : add/remove rule, conditions, substitutions,
submit the form, edit, etc.
(There is a looot of JS everywhere, so certainly a looot of bugs...).
- when you have your rules defined, you can now launch the cronjob
script without any parameter.
A report will be displayed with the matching itemnumber and the
substitutions to apply. Verify results are consistent.
- launch the script with the -c argument and verify values have been
modified depending the substitution rules.
Signed-off-by: juliette et remy <juliette.levast@iepg.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Add the ability to specify fields from biblioitems table.
Test plan:
Same as before but try with fields from the biblioitems table.
Signed-off-by: juliette et remy <juliette.levast@iepg.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Add UT for C4::Items::ToggleNewStatus
Test plan:
prove t/db_dependent/Items/ToggleNewStatus.t
Signed-off-by: juliette et remy <juliette.levast@iepg.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: FIX - condition on biblioitems table does not work
If a rule contains a condition on the biblioitems table, the match won't
work. This patch fixes this issue.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Use DBIx-Class to retrieve column names
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Don't use the biblioitems fields for the subtitution
It's dangerous to allow a change on the biblioitems fields with this
feature.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Rename the duration parameter with 'age'
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: The age parameter should be a number
The template should check if the age parameter is correctly filled
(should be a number).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Change the name of the feature
Originaly this feature only permits to update the "new" field.
Now all item fields can be updated.
The name of the feature is now "Automatic item modifications by age".
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023 [QA Followup]
* Update DB version
* Fix capitalization error
* Rename misc/cronjobs/toggle_new_status.pl to misc/cronjobs/automatic_item_modification_by_age.pl
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023 [QA Followup] - Complete the renaming of "toggle new status" to "automatic item modification by age"
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Right now, fines are updated based on the fine description. There are a
number of areas where this can go wrong ( date or time format changing,
title being modified, etc ). Now that issues has a unique
identifier, we should use that for selection and updating of fines.
Test Plan:
1) Apply this patch
2) Test creating and updating fines via fines.pl
and checking in overdue items. No changes should be noted.
3) prove t/db_dependent/Circulation.t
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Branch::GetBranchDetail retrieved library infos, it could be easily
replaced with Koha::Libraries->find
When this change needs other big changes, the unblessed method is
called, to manipulate a hashref (as before) instead of a Koha::Library
object (for instance when $library is sent to GetPreparedLetter).
Test plan:
1/ Print a basket group, the library names should be correctly
displayed.
2/ Enable emailLibrarianWhenHoldIsPlaced and place a hold, a HOLDPLACED
notice will be generated (focus on the library name)
3/ Edit a patron and change his/her library
4/ Generate the advanced notices (misc/cronjobs/advance_notices.pl) and
have a look at the generated notices
5/ Same of overdues notices
6/ Set IndependentBranches and use a non superlibrarian user to place a
hold. The "pickup at" should be correctly filled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Script does not appear to have any other modifying patches at this
time based on bz splitter. This is a perfect time to clean up this
script!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
If no branchcode is given, all the libraries are retrieved and the same
query (so without using the libraries loop) is executed for each
library.
Test plan:
Use the j2a.pl cronjob to change the category of a child patron
If a branchcode is passed to the script, only the children from this
branchcode should be updated.
But if it is not passed, all children of the DB should be updated.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch does:
[1] It removes some unused modules.
[2] It adds some options not listed in the synopsis.
[3] It removes an unused sql expression from one query.
Note: In fines related code the third parameter of CalcFine sometimes
is named as days_overdue too.
[4] Corrects a few typos in comments or pod.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
