Fixes the following koha-qa.pl error:
FAIL misc/cronjobs/overdue_notices.pl
OK pod
OK forbidden patterns
OK valid
FAIL critic
# Variables::ProhibitConditionalDeclarations:
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If there is no active currency, when running overdue_notices.pl
you get a sofware error "Can't use an undefined value as a HASH
reference" on GetCurrency() function call.
With this patch, if there is no active currency, fines are formated
by default 0.00 and notices are correctly generated.
Test plan :
- have at least one borrower with overdue that should trigger a notice
- verify that there is no active currency (Adminitration > Currency &
Exchange rates)
- run misc/cronjobs/overdue_notices.pl -v -n (to get the notice directly
on output)
=> without the patch you get the software error
=> with the patch, notices are correctly generated
If an active currency is defined, the script overdue_notices.pl runs
the same with or without patch
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch moves saved reports "action" links (view, edit, run, etc)
into a dropdown menu triggered by clicking an "Actions" button.
To test you must have saved reports. View the saved reports page and
click the "Actions" button in the last column of the table. This should
trigger a menu. All options in the menu should work correctly.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
works and looks awesome
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Yes, exactly what I had in mind. Great improvement.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch changes the MARC21 007 plugin editor so that it uses
1 character instead of 4 characters for position 01.
TEST PLAN:
1) Create new record/edit an existing record
2) Using the tag editor for the 007 field, choose "Videorecording"
3) Click OK
4) Change the second character in the 007 from "c" to "d"
5) Open the tag editor again
6) Note that position 01 will still say "c - Videocartridge" rather
than "d - Videodisc".
7) Exit tag editor
8) Apply patch
9) Reload the page (Shift + Refresh is always useful)
10) Open the tag editor again
11) Note that position 01 will now say "d - Videodisc"
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Koha::DateUtils::dt_from_string() and DateTime->now() are
not equivalent -- they don't handle timezones in the same
way.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This reverts changes made to CanBookBeRenewed by
patches from bug 9367.
GetReserveStatus is not suitable to recognize if an item
can fild a hold on return and CheckReserves is restored.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
This patch includes a squash of a follow-up authored by
Katrin Fischer <Katrin.Fischer.83@web.de>:
CheckReserves returns '' when no reserve is found,
so $resfound will always be defined and we need to
check if it's true.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Follow-up fixing some and adding more unit tests.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Initial work on unit tests for CanBookBeRenewed. More scenarios are needed.
Also made Circulation.t use autocommit=0.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Enable the syspref emailLibrarianWhenHoldIsPlaced
2) Modify the HOLDPLACED notice, add some item level fields
3) Place an item level hold
4) Check the email you receive ( or just look at it from the db )
You should see the item level fields are new populated
5) Place a title level hold
6) Check the email you receive - item fields are not populated,
but notice still looks ok.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds unique IDs for:
opaccredits
opacheader
OPACMobileUserCSS
OpacNavBottom
OpacUserCSS
opacuserjs
This is an amended patch which includes the changes to CCSR which I
forgot to commit before. The patch does not add a unique ID for
opacheader to CCSR, since opacheader is positioned wrong.
This is most useful for previewing changes you make in the OPAC
preferences using the following javascript in your IntranetUserJS:
function showPreview(url) {
$('#preview-loading').show();
document.getElementById('opac-preview').src = url;
$('#opac-preview').load(function () {
$('#opac-preview').show();
$('#region-opaccredits', $('#opac-preview').contents()).html($('#pref_opaccredits').val());
$('#region-opacheader', $('#opac-preview').contents()).html($('#pref_opacheader').val());
$('#opacmainuserblock', $('#opac-preview').contents()).html($('#pref_OpacMainUserBlock').val());
$('#opacmainuserblockmobile', $('#opac-preview').contents()).html($('#pref_OpacMainUserBlockMobile').val());
$('#region-opacnav', $('#opac-preview').contents()).html($('#pref_OpacNav').val());
$('#region-opacnavbottom', $('#opac-preview').contents()).html($('#pref_OpacNavBottom').val());
$('#opacrightsidebar', $('#opac-preview').contents()).html($('#pref_OpacNavRight').val());
$('#noresultsfound', $('#opac-preview').contents()).html($('#pref_OPACNoResultsFound').val());
$('#opacresultssidebar', $('#opac-preview').contents()).html($('#pref_OPACResultsSidebar').val());
$('#region-opacusercss', $('#opac-preview').contents()).replaceWith('<style id="region-opacusercss" type="text/css">' + $('#pref_OPACUserCSS').val() + '</style>');
$('#region-opacuserjs', $('#opac-preview').contents()).replaceWith('<script id="region-opacuserjs" type="text/javascript">' + $('#pref_opacuserjs').val() + '</script>');
$('#preview-loading').hide();
});
}
$(document).ready(function () {
if ($('#pref_OpacNav').size() > 0) {
$('#doc3').after('<div class="navbar navbar-fixed-bottom" style="z-index: 10000;"><div id="preview-pane" class="navbar-inner"><h4 style="float: left; margin-right: 2em;">Preview changes</h4><div class="btn-group" data-toggle="buttons-radio"><button type="button" class="btn" id="preview-main">Main page</button><button type="button" class="btn" id="preview-results">Results</button><button type="button" class="btn" id="preview-details">Details</button><button type="button" class="btn active" id="preview-hide">Hide</button></div><img id="preview-loading" style="display: none;" src="/intranet-tmpl/prog/img/loading-small.gif"><iframe id="opac-preview" style="height: 20em; width: 100%; display: none;"></iframe></div></div>');
$('#preview-main').click(function () {
showPreview('/cgi-bin/koha/opac/opac-main.pl');
});
$('#preview-results').click(function () {
showPreview('/cgi-bin/koha/opac/opac-search.pl?idx=&q=pqf%3D%40attr+1%3D_ALLRECORDS+%40attr+2%3D103+%22%22&branch_group_limit=');
});
$('#preview-details').click(function () {
showPreview('/cgi-bin/koha/opac/opac-detail.pl?biblionumber=1');
});
$('#preview-hide').click(function () {
$('#opac-preview').hide();
$('#preview-loading').hide();
});
}
});
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Note: The provided JavaScript didn't work for me and resulted in an
error in Firebug. Ater talking to Jared it seems like there is more needed
than the bit of Javascript so make this work, but it might be a good
starting point, so I am leaving it in the commit message.
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The "and" label not only improves the accessibility but also gives the
user an idea that the operation between multiple search fields is a
boolean "AND" by default.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Actually only adds a label and an id to the select.
Note that the boxes do not exactly align anymore now (with fewer options).
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This makes it clear for screen reader users.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Note that you should delete all your private lists to see this change.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When syspref "UniqueItemFields" is defined, the item uniqueness is
tested in acquisition by an AJAX call to check_uniqueness.pl. This
patch fixes an issue where check_uniqueness.pl wasn't looking
at the correct CGI parameters.
Test plan :
- Select an existing item with barcode
- Add "barcode" to "UniqueItemFields" syspref (use space as separator
for multiple values)
- Set "AcqCreateItem" syspref to "Create an item when placing an order"
- Go to an acquisition basket
- Create a new order from empty
- Enter existing barcode in item form and save
=> You get an alert that barcode already exists and order is not saved
- Enter a non-existing barcode in item form and save
=> Order and item are created
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
With this patch Koha should correctly copy indicators
(and create $2 subfield in MARC 21 if need) from the chosen authority
record to the edited bibliographic record (according to discussion in
bugzilla). UNIMARC and MARC 21 flavors are covered.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: work as described, testing in comments 9 and 12.
No errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests. Tested functionality repeating
some of the tests noted by Bernardo - checking mostly 1xx, 490,
and 7xx.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This makes the POD for the columns() function consistent
with the rest of C4/Members.pm. It also removes a note
that can be relegated to the bug report and the Git
history.
Also, since C4::Members::columns() is not actually a
class method, this patch changes the invocation to
not call it that way.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The initial thought was to remove this function. However,
tools/import_borrowers.pl uses it. So rather than remove
it to solve the problem, it was reworked to a more generic
solution which runs faster.
By accessing $sth->{NAME} directly, the driver becomes
responsible for filling it correctly. This happens when a SELECT
is done on the borrowers table. It does not even have to have
data in the result set!
The columns method could be more generic and used elsewhere too.
Comparison between the old method and the STH method showed a
significant time difference. The old method took 35 seconds
for 40k iterations versus 19 seconds for the same amount of
iterations with the STH method regardless of the size of the
borrowers table.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fixed the path to __ZEBRA_BIBLIOS_CFG__ for <server id="mergeserver">
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Good catach drojf.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes the koha-create script install the file zebra-biblios-dom.cfg
with the proper string substitutions inside on the new instance koha-conf.xml file.
It also adds two option switches that control the indexing mode for the instance:
--biblio-idx {dom|grs1}
--auth-idx {dom|grs1}
DOM indexing is set as the default for both authorities and bibliographic records.
Following drojf (thanks!) advice I arranged stuff like explained here:
http://wiki.koha-community.org/wiki/Switching_to_dom_indexing
To test:
- Apply the patch
- Build your own packages and install them on a test server
a) Create a new instance without using the new switches like:
$ koha-create --create-db domtest
- Check there's a file /etc/koha/sites/domtest/zebra-biblios-dom.cfg
- Check that /etc/koha/sites/domtest/koha-conf.xml points to:
* zebra-biblios-dom.cfg (biblioserver section)
* zebra-biblios-dom.cfg (publicserver section)
* zebra-authorities-dom.cfg (authorityserver section)
- Success means the new default is DOM
b) Play with the 4 possible combination of option switches
$ koha-create --create-db --auth-idx grs1 --biblio-idx grs1 domtest
$ koha-create --create-db --auth-idx grs1 --biblio-idx dom domtest
$ koha-create --create-db --auth-idx dom --biblio-idx grs1 domtest
$ koha-create --create-db --auth-idx dom --biblio-idx dom domtest
- Check the koha-conf.xml file reflects the chosen options.
c) Run
$ koha-create --help
- It should advertise this addition accordingly.
d) Run
$ man koha-create
- Man page for koha-create should provide good information on the new switches behaviour
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If a basket has a lot of items it may be inconvenient to scroll to the
bottom of the patch to reach the "add to basket" form. This patch adds
as "Add to basket" button to the toolbar which uses JavaScript to copy
the form into a modal dialog for quick access.
To test, apply the patch and view an open basket. You should be able to
click the "Add to basket" button to trigger a modal dialog with the full
"Add to basket" list of options. All options in the list should function
normally.
If you view a closed basket the new button should not appear.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass and I love it :)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The variables for AUTH_INDEX_MODE and ZEBRA_TOKENIZER were not
being saved to the koha_install_log file. As a result when using the
--prev-install-log option in Makefile.PL the user was still prompted
to select them.
This patch adds the appropriate variables to the list saved in
the install log.
To test:
On a (non-package) system installed/upgraded without the patch running
'perl Makefile.PL --prev-install-log /path/to/koha-install-log' will
still prompt you to choose authorities indexing mode and select
between chr and icu, after upgrading with this patch applied the same
command should get the responses from the install log and not require
user intervention.
The values can be seen written into misc/koha-install-log
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If an item is returned and has mutiple error or warnings (e.g.,
it both needs to be transferred and the patron was debarred
in the course of the return), because of a bug in the template,
not all of the messages would be displayed.
This patch changes the template to show both messages and alerts.
Test plan :
- Perform an checkout that will a checkin :
* need a transfert (return in a different branch)
* set user debarred (depends on issuing rules)
- Perform check-in
=> You get tranfert message and debarment alert
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
On intranet, when placing a hold requst:
If borrower has reached the request limit, a warning should appear :
Cannot place hold
* Too Many Holds: TEST has too many holds.
This works when quota defined in circulation rules is reached but not
when limit specified in syspref maxreserves is reached, in case this
limit is lower than the one defined is circulation rules.
This is because template param maxreserves is set twice, this patch
corrects this bug.
Also moves warnings and messages conditional variable from Perl to
template because it cause the same bug as for maxreserves.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
An error in the onclick for phone notices causes the "Do not notify"
checkbox to be checked when the phone checkbox is checked. Also,
checking "Do not notify" does not uncheck the phone checkbox.
Test plan:
1) Enable TalkingTechItivaPhoneNotification
2) Browse to the new patron screen ( memberentry.pl )
3) In the patron messaging preferences check the Phone checkbox
4) Not the "do not notify" checkbox is then checked
5) Uncheck the "do not notify" checkbox, and check the Email checkbox as well
6) Now check the "do not notify" checkbox, note the Phone checkbox remains checked
7) Apply this patch
8) Repeat steps 3-6, noting the odd behavior is no longer present
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Perl 5.14 changed array and hash container functions (e.g., keys())
to accept hashrefs or arrayrefs. However, this doesn't work in
Perl 5.10, so doing
scalar(keys( function_returning_hashref() ) );
is a syntax error in that version. This patch changes the affected
tests to explicitly difference the hashrefs returned by the various
functions.
To test:
Verify that t/db_dependent/ClassSource.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If IndependentBranches is ON, patrons are not allowed to place
hold requests on items whose owning library is different from
the patron's home library, *unless* the canreservefromotherbranches
system preference is also ON.
The patch implements the intended behavior; without it, IndependentBranches
and canreservefromotherbranches were not consulted during the
item holdability check.
To test:
[1] Have IndependentBranches ON and canreservefromotherbranches
OFF. Make sure that the circulation rules are set up to
permit patrons to place hold requests in general.
[2] In the OPAC, log in as a patron from library A, and try placing
a hold on an item from library B. The patron will be able to
place the request.
[3] Cancel the request.
[4] Apply the patch.
[5] Try placing the same hold request. This time, the request should
be forbidden.
[6] Turn on canreservefromotherbranches.
[7] Try placing the hold request. This time, it should go through.
[8] Cancel the request.
[9] Turn off IndependentBranches.
[10] Try placing the hold request and verify that it is permitted.
[10]
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If IndependentBranches is ON and canreservefromotherbranches is OFF,
a patron is not permittedo to request an item whose homebranch (i.e.,
owner of the item) is different from the patron's own library.
However, if canreservefromotherbranches is turned ON, the patron can
create such hold requests.
Note that canreservefromotherbranches has no effect if
IndependentBranches is OFF.
To test, run prove -v t/db_dependent/Holds.t. Without the bugfix
patch for bug 2394, the last two tests should fail.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
set_solr and set_zebra is not really useful. It is preferable to use
mock_preference directly.
To test:
1/ Launch Solr
2/ prove -r t/searchengine/
It should produce:
% prove -r t/searchengine/
t/searchengine/000_conn/conn.t ........... ok
t/searchengine/001_search/search_base.t .. ok
t/searchengine/002_index/index_base.t .... IndexRecord called with biblio 2
Indexing biblio 2
t/searchengine/002_index/index_base.t .... ok
t/searchengine/003_query/buildquery.t .... ok
t/searchengine/004_config/load_config.t .. ok
All tests successful.
Files=5, Tests=21, 4 wallclock secs ( 0.03 usr 0.01 sys + 2.74 cusr
0.20 csys = 2.98 CPU)
Result: PASS
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Had to get Solr going again to test this, man .. they could make that
easier
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This unit tests file does not need the t::lib::Mocks::Context module.
To test:
prove t/db_dependent/Circulation_issuingrules.t
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, test checks out.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
t::lib::Mocks::Context tried to deal with preferences but did not manage
to.
This patch removes this module and add 2 routines in t::lib::Mocks in
order to mock C4::context->preference and C4::Context->config.
To test:
===START t/test.pl===
use Modern::Perl;
use t::lib::Mocks;
use C4::Context;
say "initial value for version: " . C4::Context->preference('Version');
say "initial value for language: " . C4::Context->preference('language');
t::lib::Mocks::mock_preference('Version', "new version for testing");
say "version is mocked with: " . C4::Context->preference('Version');
say "language is not yet mocked: " . C4::Context->preference('language');
t::lib::Mocks::mock_preference('language', 'new langage for testing');
t::lib::Mocks::mock_preference('Version', 'another version for testing');
say "version is mocked with another value: " . C4::Context->preference('Version');
say "language is finally mocked: " . C4::Context->preference('language');
===END===
Try to execute this file and check that the output is consistent.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch gets rid of finish() and replace prepare_cached by prepare.
From the man page
finish()
Indicate that no more data will be fetched from this statement handle
before it is either executed again or destroyed.
You almost certainly do not need to call this method.
Adding calls to "finish" after loop that fetches all rows is a common
mistake, don't do it, it can mask genuine problems like uncaught fetch errors.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch slightly modifies the styles of the previous/next links in a
way that I think is simpler and clearer.
To test, apply the patch and clear your browser cache if necessary.
Perform a search in the staff client, click any result, and look at the
prevous/next links.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Although previous/next browsing was added for searches in the OPAC
in 2011, the staff client has been without any sort of search browsing.
Until now. This patch is an all-singing, all-dancing, all-compatible
implementation of search browsing that will work across multiple
browser tabs and on any browser since IE7 (though the staff client
layout is broken on IE7).
To test:
1) Perform a search that will bring up multiple results.
2) View one of the results.
3) Use the Previous and Next links to browse along the search results.
4) Use the "Return to results" button to check that you end up at the
correct page of results, even if you page through more than 20
records.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
It should be possible when viewing the contents of a list to click a
link to remove an individual title from the list without having to check
a checkbox and click another button.
This patch adds a link to each list item to "Remove from this list."
The functionality is JavaScript-dependent, automatically checking the
appropriate checkbox and submitting the form to delete.
To test, view a list for which you have delete permission. There should
be a "Remove from this list" link next to each item on the list. Test
delete functionality by:
- Clicking the link and then clicking cancel.
- Clicking the link and confirming.
- Checking more than one checkbox and then clicking a single remove
link (only the one corresponding record should be removed).
- Checking one or more checkboxes and clicking the "Remove from list"
link at the top of the page.
If JavaScript is disabled the links should not appear.
There are now two delete confirmation messages: One if you're removing
only one item, another if you're removing more than one. This is true
whether you use the links or the checkboxes.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This follow-up patch makes the subtitle part of the same
hyperlink as the title, maintaining consistency with other
pages in the staff interface such as list contents.
To test:
[1] Make sure that the Keyword to MARC mapping includes
mappings to 'subtitle'.
[2] Find a biblio that has both title and subtitle. Check
it out to one patron and place it on hold for another.
[3] In the checkout and patron details pages, verify that
the entry for this bib in the list of checked out titles
or hold requests includes both title and subtitle in
the same hyperlink.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds subtitles (from Keyword to MARC mapping) to the
following tables on the checkout page:
- Checkouts
- Previous checkouts
- Relative's checkouts
- Relative's previous checkouts
- Holds
Additionally it suppresses the appearence of the superfluous word "by"
in cases where the biblio has no author.
Test scenario:
--------------
1)
Make sure that you have one or more fields mapped to subtitle in:
Home . Administration . Keyword to MARC mapping
(e.g. 245 b)
2)
Test the checkout page with patrons having
- current checkouts (today)
- previous checkouts
- relatives (e.g. kids) with current /previous checkouts
- holds on items
- holds on biblios
...with items having:
- title, subtitle, author
- title, no subtitle, author
- title, subtitle, no author
- title, no subtitle, no author
3)
Do the same on patron's detail page
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- fix a typo
- rename the help file for the course reserves home
page so that it gets picked up when the user clicks
the help link there.
To test:
[1] Go to the course reserves home page, then click on the
"Help" link. Verify that a help page with contents is
displayed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds the missing help files for course reserves.
To test:
* visit every page related to course reserves in the staff client
* click help in the top right
* review the help file for typos/content/links
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In t/db_dependent/Koha.t, the test "Got a quote based on today's
date" is failing :
$prove t/db_dependent/Koha.t :
t/db_dependent/Koha.t .. 1/6
# Failed test 'Got a quote based on today's date.'
# at t/db_dependent/Koha.t line 126.
# Compared $data->{"source"}
# got : 'Herbert Hoover'
# expect : 'Abraham Lincoln'
# Be sure to run this test on a clean install of sample data.
# Looks like you failed 1 test of 4.
Looks like the wrong quote is returned by GetDailyQuote().
I'm using a databased created with the English sample SQL datas.
I think I found the cause :
The test "Got a random quote." calls GetDailyQuote('random'=>1) which
changes the quote timestamp to now. When then testing GetDailyQuote(),
this quote (which may not be the one created by test) is the most
recent quote.
This patch moves the "Got a random quote." test after "Got a quote
based on today's date" to solve the problem.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The serials collection page displays branchcode instead of library name.
This patch uses the Branches template plugin to display the library name
instead.
Also corrected: Added missing datatables config include to prevent a
JavaScript error.
To test, view the serials collection page for a subsciption with
existing issues. Library names should be displayed instead of
branchcodes. There should be no JavaScript errors reported by the
browser.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works well and uses the new TT plugin for displaying the branch name.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The tests are wrapped in a database transaction.
To test:
prove t/db_dependent/ClassSource.t
t/db_dependent/ClassSource.t .. 1/24 prepare_cached(SELECT * FROM `class_sort_rules` WHERE `class_sort_rule` = ?) statement handle DBI::st=HASH(0x92dbedc) still Active at C4/ClassSource.pm line 249
prepare_cached(SELECT * FROM `class_sources` WHERE cn_source = ?) statement handle DBI::st=HASH(0x926876c) still Active at C4/ClassSource.pm line 137
attempting to use non-existent class sorting routine routine1
prepare_cached(SELECT * FROM `class_sort_rules` WHERE `class_sort_rule` = ?) statement handle DBI::st=HASH(0x92dbedc) still Active at C4/ClassSource.pm line 249
prepare_cached(SELECT * FROM `class_sources` WHERE cn_source = ?) statement handle DBI::st=HASH(0x926876c) still Active at C4/ClassSource.pm line 137
t/db_dependent/ClassSource.t .. ok
All tests successful.
Files=1, Tests=24, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.12 cusr 0.01 csys = 0.15 CPU)
Result: PASS
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When adding orders from staged file, you can create one order per
record using item form in the bottom of addorderiso2709.pl. The
form was missing checks of mandatory item fields; this patch
adds those checks.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All 3 patches pass tests and QA script.
Some additional notes on the test plan from the first patch:
It took me a while to figure out a combination of subfields
that would trigger the bug. I am not sure about the condition
that transforms the input field into a textbox as it does
not seem to happen for every field.
What worked in the end was (MARC21):
- $g cost, normal purchase price = mandatory
- $h serial enumeration/chronolgy = optional, filled with
text over 100 characters
Checked for:
- Adding items in cataloguing
Was able to reproduce the problem, mandatory check works
as expected.
- Adding items from staged file in acq
Was not able to trigger the problem, because we don't edit
the item here, but mandatory check works as expected.
- Addings items for serial subscriptions
Was not able to trigger the problem, because we don't edit
the items here, but mandatory check works better as before
as missing mandatory fields are now highlighted and weren't
before.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Use of CheckMandatorySubfields from cataloging.js
everywhere an item cataloging form is checked for
mandatory fields.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Under certain circumstances, when editing an item, you get a popup
warning
"1 mandatory fields empty (highlighted)".
Even though all mandatory fields are filled in.
This occurs when there is a field with a huge content (more than 100
characters) that gets displayed in a textarea instead of input.
This patch corrects the Javascript form check by using siblings().
Also adds a more precise filter to find mandatory inputs because
looking in full page may bring unwanted results.
Test plan :
- In a framework, make sure you have in item field :
An optional subfield (without authorised value),
then a mandatory subfield, then an optional subfield
next to mandatory subfield
For example : $i (optional), $r (mandatory) and $s (optional)
- Open a biblio record and create a new item
- Enter more than 100 characters in $i, fill $r and $s
- Click "Add item"
- Edit this item
=> You get a textarea for $i
- Empty $s and Save
=> Without patch, you get a warning and form is not saved and you see that $s is yellow while it should be $r
=> With patch, form is saved
- Re-edit this item
- Empty $r and save
=> You get a warning and form is not saved
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Notes on last patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The actual tests in this script are not dependent on the database,
but simply loading C4::Auth requires a valid(ish) koha-conf.xml
and database.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Add validation of the value of the KohaOpacRecentSearches. In
particular, this patch avoids the generation of an internal server
error when the OPAC is presented with an old cookie that uses the
old Storable-based serialization.
This patch also moves parsing of the cookie value into a
new routine in C4::Auth, ParseSearchHistoryCookie, and adds
a test case.
To test (in conjunction with the previous patch):
Exercise the OPAC search history functionality, after
turning on the EnableOpacSearchHistory syspref:
- As an anonymous user, conduct a variety of searches,
including ones that include non-ASCII characters
- Check the search history and verify that all searches
are listed
- Apply this patch and the previous one.
- Do *not* clear the KohaOpacRecentSearches cookie
- Check the search history and verify that no searches
are listed any more
- As an anonymous user, conduct a variety of searches,
including ones that include non-ASCII characters
- Check the search history and verify that all searches
are listed
- Log into the OPAC
- Verify that current and past searches are listed in
search history.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
Exercise the OPAC search history functionality, after
turning on the EnableOpacSearchHistory syspref:
- Clear the KohaOpacRecentSearches cookie
- As an anonymous user, conduct a variety of searches,
including ones that include non-ASCII characters
- Check the search history and verified that all searches
are listed
- Log into the OPAC
- Verify that current and past searches are listed in
search history.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
