This patch allows for more flexibility for determining when the number
of holds a record has should trigger the reduction of the loan length
for items on that record.
This patch adds a new system preference decreaseLoanHighHoldsControl,
which defaults to 'static', the original behavior of the feature.
It also has a new behavior 'dynamic' which makes the feature only
decrease the loan length if the number of holds on the record exceeds
the number of holdable items + decreaseLoanHighHoldsValue.
It also allows items to be filtered from the list of items based
on the damaged, lost, not for loan, and withdrawn values even if
those values would have allowed holds ( i.e. values < 0 )
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Set decreaseLoanHighHolds to Enable
4) Set decreaseLoanHighHoldsControl to "over the number of items on the record"
5) Set decreaseLoanHighHoldsDuration to 1
6) Set decreaseLoanHighHoldsValue to 3
7) Create a record with 5 items
8) Please 8 or more holds on the record
9) Check out one of the items to a patron
10) Note the loan length is reduced to 1 day
11) Set decreaseLoanHighHoldsValue to 3 to 2
12) Check out one of the items to a patron
13) Note the loan length is *not* reduced
14) Enbale all the filters possible in decreaseLoanHighHoldsIgnoreStatuses
15) Set one item to be damaged
16) Note the loan length is reduced
17) Unset the damaged status
18) Repeat steps 15 - 17 for lost, not for loan, and withdrawn
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
When deleting a currency, the confirmation and error dialogs should use
Font Awesome icons. This patch makes this change.
To test, apply the patch and go to Administration -> Currencies and
exchange rates.
- Click the "delete" link next to any currency.
- Verify that the confirmation dialog is correctly styled.
- Test the both cancel and confirm operations.
- Verify that the deletion confirmation dialog is correctly styled.
Bug 15962 prevents testing the error dialog which should appear if you
try to delete a currency which is use (defined as a currency in a vendor
record). To test this error you could manually enter a currency code
into aqbooksellers.currency and then try to delete that currency.
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
It will prevent wrong value to be selected when the back button of the
browser is used.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
EDIT: Removing JS line
To test:
1) Go to Admin -> Koha to MARC Mapping
2) Test selecting biblio / biblioitems / items
3) Confirm the table content changes and behaves as it should which each
selection
Sponsored-by: Catalyst IT
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The C4::Members::PutPatronImage inserted/updated the image of a patron.
This can be done easily with ->find->set->store or ->new->store
Test plan:
1/ Modify the image of a patron from the patron detail page
2/ Add an image to a new patron
3/ Use the "Upload patron images" tools (tools/picture-upload.pl) to add
or modify the image of a patron
4/ Use the "Upload patron images" tools (tools/picture-upload.pl) to add
or modify the image of several patrons, using a zip file.
Stress the script trying to get as many errors as possible (wrong
cardnumber, wrong mimetype, file does not exist, etc.)
With this patch, if the cardnumber does not exist, you will get a
specific error "Image not imported because this patron does not exist in
the database"
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When closing a basket in Acquisitions the confirmation dialog should be
styled using Font Awesome icons. This patch adds them.
The cancel button has been moved into its own form so that we can get
rid of several problematic JavaScript issues: The use of the
"javascript:" pseudo-protocol, the use of an "onclick" attribute, and
the use of a JS redirect where a GET action will do.
To test, apply the patch and locate an open basket in Acquisitions which
can be closed.
- Click the 'Close this basket' button and confirm that the icons in the
dialog look correct.
- Test the cancel operation to make sure you are redirected back to the
page showing the basket details.
- Test the confirm operation and verify that the basket is closed.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Please note that the confirmation message display depends on
BasketConfirmations.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
In Acquisitions, when you delete (cancel) an order, a dialog asks you to
confirm. This dialog should be styled with Font Awesome icons.
Other minor edit: Changing page grid style for centered main content
area.
To test, apply the patch and locate a basket in Acquisitions with an
order.
- View the details for the basket.
- Click the 'Delete' link next to the order you want to delete.
- Confirm that the dialog is correctly styled.
- Test the cancel operation and verify that you are correctly redirected
back to where you were.
- Test the confirmation operation and verify that your order is deleted.
- Also test the deletion process from Acquisitions -> Vendor -> Invoices
-> Invoice -> Go to receipt page -> Delete order.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
When attaching an existing item to a record, the confirmation and error
dialogs should be styled using Font Awesome icons. This patch revises
the buttons and revises the global CSS file.
To test, apply the patch and clear your cache if necessary.
- Locate a record in the catalog to which you can attach an item.
- Select "Attach item" from the "Edit" menu.
- Submit a barcode for an exising item.
- Verify that the confirmation dialog is correctly styled.
- Test the operation of both the "OK" and the "Attach another item"
buttons.
- Submit an invalid barcode.
- Verify that the error dialog is correctly styled.
- Test the operation of both the "OK" and the "Try again"
buttons.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch makes some markup changes to the patron lists interface in
order to make them more consistent with other areas of Koha.
Change to look for when testing:
Tools -> Patron lists:
- Wrap "New patron list" button in standard <div id="toolbar">
- Place toolbar above page heading.
Tools -> Patron lists -> New patron list:
- Use built-in form validation for required fields
- Clarify page title and breadcrumbs on list add and edit
Validation errors have been corrected on all three templates, including
removal of an extra </div>.
Revision: I was wrong about the frequency of use of "Modify." There's no
clear-cut reason to replace it with "Edit" so I have undone that change.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Works as expected. No regression. Better texts. Consistent validation.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The authorities MARC subfield structure template contains some unused
JavaScript, "function displayMoreConstraint()" This patch removes it.
To test, apply the patch and go to Administration -> Authority types ->
MARC structure -> Subfields -> Edit subfields and confirm that there are
no JavaScript errors and tab switching works correctly.
A search of the source code should show no instances of
"displayMoreConstraint."
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
No regression, no JS warning.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
When the SMSSendDriver system preference is set to "Email" a link to the
SMS cellular providers management page should appear in the left-hand
sidebar menu on Administration pages. This patch adds the link to
admin-menu.inc.
To test, apply the patch set your SMSSendDriver system preference to
"Email." View various Administration pages which show the left-hand
sidebar menu and confirm that "SMS cellular providers" is in the list.
Empty the SMSSendDriver preference and confirm that the link no longer
appears.
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This subroutine just retrieved the messages given some parameters.
Some job should not have been done in this subroutine.
It was called only 3 times, in circ/circulation.pl and opac-user.pl.
Basically it was used to retrieved the message to displaye for a given
patron ($borrowernumber) at the OPAC (B) or Staff (L).
For the 3 calls, the 2 parameters $borrowernumber and $type
(message_type) were passed, the "%" trick at the beginning of the
subroutine was useless.
Moreover, the date formatting should be done on the TT side, not in
subroutine.
The can_delete flag was set if the branchcode given in parameter was the
same as the one of the message. This has been delegated to the template.
Indeed the can_delete was not valid, since it must depend on the
AllowAllMessageDeletion pref.
The test is now:
IF message.branchcode == branch OR
Koha.Preference('AllowAllMessageDeletion'')
There is not specific test plan for this patch, the changes have already
been tested in previous patches.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Most part of the code here is unnecessary complex. We should selected
the currency if it is selected, that's all :)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The holds queue is typically generated many times a day in order to
select items to fill holds. Often these items are to be sent to a
different library. However, if the library whose item is picked to fill
a hold is closed, that hold will remain unfilled even if there are other
open libraries who own that item. It would be helpful if we could skip
closed libraries for the purpose of selecting items to fill holds.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a record with two items on it, one at Branch A, and one at
Branch B
4) Place a hold for pickup at Branch C
5) Generate the holds queue
6) Note which branch's item is selected for the hold
7) Enable the new system preference HoldsQueueSkipClosed
8) Add today as a holiday for that branch noted in step 6
9) Regenerate the holds queue
10) View the holds queue, notice the item selected is not from
the closed branch!
11) prove t/db_dependent/HoldsQueue.t
Signed-off by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch allows to resend both sent and failed messages.
With messages in 'sent' status, we have to be careful not to accidentally send
sent messages again. With the previous patch using GET request, this was likely
to happen because of browser storing the GET parameters.
This patch changes request method from GET to POST. Instead of a simple link,
we now have a form element.
In notices.pl we redirect back to notices.pl, because with POST there is a risk
of resending the message accidentally by form resubmission at refresh.
To test, find/create a Patron that has sent or failed notices in message_queue:
1. Enable EnchancedMessagingPreferences system preference
2. Go to Patrons -> Notices
3. In the Notice column, click the title of the sent or failed message
4. Observe that there is nothing for resending the sent or failed message
5. Apply the patches.
6. Reload Notices page and repeat step 3
7. Observe that there is now a link "Resend" in the Status-column
8. Click Resend
9. Observe that the message gets into 'pending' status
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The C4::Letters module does not have a GetMessage subroutine, which
could be quite useful.
This patch adds it and simplifies the code added by the previous patch.
It also adds a few tests and fixes POD typos.
Note that ResendNotice only resends failed messages. This will avoid to
resend already sent messages (using an url from the browser history for
instance).
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch adds a link 'Resend' under a notice in 'failed' status
in the Patron's Notices tab.
By clicking the link, we will request notices.pl with parameter
"resendnotice=XXXXX" where XXXXX is message_id. In notices.pl,
we then check whether the given message is actually in 'failed'
status. If so, we use the C4::Letters::ResendMessage(123) to
change the status of the message into 'pending'. This way it
will be processed again by the cronjob process_message_queue.pl.
To test, find/create a Patron that has failed notices in message_queue:
1. Enable EnchancedMessagingPreferences system preference
2. Go to Patrons -> Notices
3. In the Notice column, click the title of the failed message
4. Observe that there is nothing for resending the failed message
5. Apply patch.
6. Reload Notices page and repeat step 3
7. Observe that there is now a link "Resend" in the Status-column
8. Click Resend
9. Observe that the message gets into 'pending' status
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch adds:
- a new DB field items.new.
- a new page to configure this new status
(tools/toggle_new_status.pl).
- a new cronjob script (misc/cronjobs/automatic_item_modification_by_age.pl
was misc/cronjob/toggle_new_status.pl)
Why this status is useful for some libraries ?
The use cases are:
- to know easily what are the new items (with a simple sql query).
- to display an icon in the search results.
- issuing rules can be adapt for new items. Automatically (using the
cronjob script), the status change (depending the configuration) and
the item can be issued, for example.
- a RSS/Atom feeds can be created on these new items.
Test plan:
- log in with a librarian having the tools > items_batchmod permission.
- navigate to Home > Tools > Automatic item modifications by age (was: Toggle new status)
- click on the edit button
- there are 3 "blocks":
* duration: the duration during an item is considered as new.
* conditions: the status will change only if the conditions are meet.
* substitutions: if there is no substitution, no action will be done.
You can add some change to apply to the matching items.
E.g. ccode=3
new=''
If the value is an empty string (in other words, the input does not
contain anything), the field will be deleted.
You can create as many rules as you want.
- test the interface : add/remove rule, conditions, substitutions,
submit the form, edit, etc.
(There is a looot of JS everywhere, so certainly a looot of bugs...).
- when you have your rules defined, you can now launch the cronjob
script without any parameter.
A report will be displayed with the matching itemnumber and the
substitutions to apply. Verify results are consistent.
- launch the script with the -c argument and verify values have been
modified depending the substitution rules.
Signed-off-by: juliette et remy <juliette.levast@iepg.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Add the ability to specify fields from biblioitems table.
Test plan:
Same as before but try with fields from the biblioitems table.
Signed-off-by: juliette et remy <juliette.levast@iepg.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Add UT for C4::Items::ToggleNewStatus
Test plan:
prove t/db_dependent/Items/ToggleNewStatus.t
Signed-off-by: juliette et remy <juliette.levast@iepg.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: FIX - condition on biblioitems table does not work
If a rule contains a condition on the biblioitems table, the match won't
work. This patch fixes this issue.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Use DBIx-Class to retrieve column names
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Don't use the biblioitems fields for the subtitution
It's dangerous to allow a change on the biblioitems fields with this
feature.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Rename the duration parameter with 'age'
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: The age parameter should be a number
The template should check if the age parameter is correctly filled
(should be a number).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Change the name of the feature
Originaly this feature only permits to update the "new" field.
Now all item fields can be updated.
The name of the feature is now "Automatic item modifications by age".
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023 [QA Followup]
* Update DB version
* Fix capitalization error
* Rename misc/cronjobs/toggle_new_status.pl to misc/cronjobs/automatic_item_modification_by_age.pl
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023 [QA Followup] - Complete the renaming of "toggle new status" to "automatic item modification by age"
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch adds some JavaScript to the item search fields management
page so that the add form is not displayed by default. This simplifies
the interface and makes it more consistent with other similar
interfaces.
Also changed in this patch:
- Changing instances of "Items search fields" to "Item search fields."
- Correct form structure to use ordered list
- Add "required" classes and enable built-in JS form validation.
- Add explicitly labeled "Choose" options to <select>s.
- Add missing ids to form fields (labels don't work without them).
- Correct classes of message and alert dialogs.
- Add JS confirmation of deletions.
- Convert MARC tag and subfield dropdowns to regular inputs (Bug 15384).
To test, apply the patch and go to Administration.
- Confirm that the "Item search fields" link is correct.
- Follow the link and confirm that the list of existing fields is shown
by default, or a message saying there are no existing fields.
- Click the "New search field" button and confirm that it displays the
entry form.
- Confirm that submitting an empty form does not work.
- Confirm that clicking the "Cancel" link correctly hides the form.
- Confirm that submitting valid data works correctly.
- In the table of existing item search fields, confirm that the "Edit"
button works correctly.
- Confirm that submitting edits works correctly.
- In the table of existing item search fields, confirm that clicking
"Delete" highlights the row in question and a confirmation dialog
appears.
- Test both canceling and confirming deletion.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. JSHint OK, koha-qa OK.
Revision per QA: Undid the change making tag and subfield inputs text
fields.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The "highlight" class on table rows is unnecessary since we have a CSS
rule which defines colors for alternating row colors. This patch removes
use of the "highlight" class from templates and removes the definition
from staff-global.css
To test, view the affected pages and confirm that the change has not
broken anything.
Acquisitions -> Vendor -> View basket
Acquisitions -> Late orders
Acquisitions -> Ordered
Acquisitions -> Vendor -> Receive shipment
Acquisitions -> Spent
Acquisitions -> Vendor details -> Contracts table
Administration -> MARC frameworks (comment removed only)
Administration -> Class sources
Authorities -> Authority search results
Catalog -> Bibliographic detail page -> Items -> View item's checkout
history
Catalog -> subject.tt (is this template used?)
Cataloging -> Cataloging search results
Patrons -> Patron account
Reports -> Patrons who haven't checked out
Reports -> Statistics wizards -> Patrons
Reports -> Top lists -> Most-circulated items
Reports -> Inactive -> Items with no checkouts
Reports -> Reports dictionary
Reports -> Statistics wizards -> Circulation
Reports -> Statistics wizards -> Holds
Holds -> Place a hold -> Existing holds table
Serials -> New subscription -> Search for a vendor -> Search results
Serials -> Check expiration
Serials -> Subscription -> Serial collection
Serials -> Subscription -> Serial collection -> Edit serials
Suggestions
Tags -> View tags -> View titles with a tag
Tools -> Manage staged MARC records -> Batch (I think the affected
section of this template is obsolete)
Tools -> Log viewer -> Log result
Lists -> View lists (May be broken by Bug 15916)
Note that if you search the templates for instances of a <tr> with a
"highlight" class you'll find two instances in slip templates which
refer to a class defined in printreceiptinvoice.css.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Looks good. Haven't seen any regression.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch replaces the email address text overflow solution implemented
by Bug 3256 with a CSS3 technique: text-overflow: ellipsis
https://developer.mozilla.org/en-US/docs/Web/CSS/text-overflow
To test, apply the patch and clear your browser cache. Edit the primary
email address of a patron so that it is very long. View that patron in
the staff client (on the checkout or details page, for instance) and
confirm that the email address is truncated with "..."
Confirm that the link and the title attribute of the link contain the
correct, full email address.
Revision uses a percentage instead of a fixed width for email display in
the sidebar to accommodate varying sidebar widths. Also added: Handling
of all email addresses displayed on the patron detail page. Although
email addresses in the body of that page were not in the scope of the
original patch, it's a good improvement to include those as well.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
If ExpireReservesMaxPickUpDelay is enabled, the "holds over" tab becomes
useless. It would be nice if the "holds over" tab would display
*tomorrow's* "holds over" so the librarian can see what will be
automatically canceled over night.
Test Plan:
1) Apply this patch
2) Enable ExpireReservesMaxPickUpDelay
3) Note the "holds over" list now displays holds that will have been
waiting more than the number of days defined in ReservesMaxPickUpDelay
as of tomorrow.
Signed-off-by: Jason Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
- thead should contain a tr
- use a correct dom for the table
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch adds the ability to configrue the visible columns on the
check in screen.
To test with both patches:
1 - Check in an item
2 - Note there is no 'Date acquired' column
3 - Apply patches
4 - Note there is still no 'Date acquired' column
5 - Note that there is now a "Show / hide columns" button
6 - Verify that you can check the box and view the 'Date acquired'
column
7 - Verify that showing/hiding columns works (it will not carry over
between items due to page reload)
8 - Verify that changes from the 'Configure columns' section of
Administration hold between checkins
Sponsored by: North Central Regional Library (ncrl.org)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch adds the dateaccessioned column fro an item to the display on
returns.pl. The column is added with a CSS class for easy selection.
To test:
Check in some items
Note date accessioned is not shown
Apply patch
Refresh page
Check in some items
See the added column 'Date acquired'
Sponsored by: North Central Regional Library (ncrl.org)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test, apply the patch and test deletion in the following cases. Test
both confirmation and cancel actions.
Circulation -> Check out
-> An item that is checked out by someone else
-> An item that is on hold to someone else
-> To a patron that has more than noisuescharge in fines (Allow
AllowFineOverride syspref)
-> To a patron that has reached the max amount of checkouts (Allow
AllowTooManyOverride syspref)
-> To a patron that has more than noissuescharge in fines (Allow
AllowFineOverride syspref and set noissuescharge syspref)
-> Renew -> An item that is on hold to someone else
-> To a patron that is at max renewals (Allow AllowRenewalLimitOverride syspref)
-> An item that is not checked out by anyone
-> Check in -> An item that is in transit to another branch
And look for other confirmation dialogs and check if I've missed any
Sponsored-by: Catalyst IT
EDIT: Made changes from Comment 2
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Bug 14189 added some global JavaScript to a new include file which is
included in doc-head-close.inc. Since it's included globally, there is
no reason not to move it to staff-global.js. This patch does so.
To test, apply the patch and clear your browser cache if necessary.
- Navigate to any page in the staff client which has multiple header
search tabs.
- Type something in one of the tabs.
- Switch tabs. Verify that your text was copied to the newly-displayed
form field.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Recurring update for the about page, Koha team.
Test plan:
Check accuracy of changes with former about page (3.22 release team) and
Roles for 3.24 page on the wiki.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
When deleting a MARC framework subfield, the confirmation message is not
styled. This patch modifies the template to style the confirmation
message like similar ones.
Depends on Bug 15785 - Use Font Awesome icons in confirmation dialogs
To test, apply the patch and go to Administration -> MARC framworks.
- Click 'MARC structure' for a framework you can edit.
- Click 'subfields' for a tag you can edit.
- Click 'Delete' for a subfield you can delete. You should see a
confirmation dialog styled like other "alert" type dialogs.
- Test both canceling and confirming deletion to confirm that both
function correctly.
Revised to fix conflicts with rollback of Bug 13618
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as expected. Revised according with bug revert 13618
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The JavaScript embedded in the MARC modification templates template is
not dependent on template processing to such an extent that it can't
be safely moved to a separate file. This patch does so, adding
definition of a some translatable strings to the template.
Other minor changes: A couple of JSHint warnings corrected, a couple of
missing semicolons added to template markup.
To test, apply the patch and go to Tools -> MARC modification templates
- Confirm that The add/update form works normally with various actions
(Add/update,Delete,Move, etc.).
- Confirm that template switching works correctly.
- Confirm that template deletion confirmation works correctly.
- Confirm that cancelling an edit works correctly
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Should be "Delete current subfield."
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
When deleting a contract in Acquisitions -> Vendor -> Contracts, the
deletion confirmation message is not styled with the standard "dialog
alert" <div>. This patch modifies the confirmation markup to match the
standard.
To test, apply the patch and go to Acquisitions -> [ a vendor] ->
Contracts
- Try deleting a contract. The confirmation box should have the standard
"dialog alert" class.
- Test the 'confirm' and 'cancel' actions and make sure both complete
correctly.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The batch checkout template has some markup and JavaScript problems
which need to be resolved, including:
- Mismatched <h3></h1>
- JavaScript includes which are not used
- Incorrect DataTables configuration
- Incorrect class on warning dialogs
- Incorrect terminology: Use "checkout" instead of "issue"
This patch also changes the markup and styling of batch checkout errors,
using Font Awesome icons to retain highlighting of warnings and errors
while (I hope) improving readability.
To test, apply the patch and go to batch checkout for a patron for whom
batch checkouts are enabled.
- Check out a batch of barcodes. Include items which will trigger errors
or warnings. For example: Invalid barcodes, lost items, items which
are already checked out, items which are on hold for another patron,
items which are damaged.
- When the table of items is displayed so that you can confirm the
checkout, make sure the table is sortable.
- Think about whether the style changes on warnings and errors are an
improvement.
- Try to initiate a batch checkout to a patron who is restricted. You
should see an "alert" style dialog instead of a "message" style one.
- Validate the HTML and confirm that there are no errors raised by this
template's markup.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch will add the missing help file to the item
search fields admin page.
To test:
* Go to administration > Item search fields
* Click Help
* Confirm help is there and correct.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The "Column visibility" text button was not translatable, now it is.
Test plan:
1/ Update the template for a given language and translate the "Column
visibility" string
2/ Go on admin/currency.pl
=> The string should be translated.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch converts the "new frequency" link to a Bootstrap-style
toolbar button in order to maintain consistency. Also included in this
patch are some other minor markup corrections:
- A colon and space after labels
- A 'Cancel' link instead of a button.
- "Required" classes for a required field.
To test, apply the patch and go to Serials -> Manage frequencies.
- Test the "New frequency" button
- Confirm that the changes to the entry form look correct.
Followed test plan, displays as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch converts the "new numbering pattern" link to a
Bootstrap-styled toolbar button for consistency with other pages in
Koha. This patch also includes minor markup corrections:
- Standardizing on the phrase "Numbering patterns" by eliminating the
occasional use of "number patterns."
- Removing mistaking closing slash on <select>
- Using standard "Cancel" link instead of a button.
- Adding a colon and space after labels.
- Fixing of "no existing patterns" message.
To test, apply the patch and go to Serials -> Numbering patterns
- Confirm that the "New numbering pattern" button looks correct and
works correctly.
- Confirm that the entry form looks correct and that the cancel link
works as expected.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Commit 243b797dd1
Bug 15285: Update common files
Set 'B' to the default dom of Datatable constructor.
This cannot work if there is no button defined.
This patch defined an empty 'buttons' param for this constructor, DT
does not raised an error anymore when initialising.
Test plan:
Confirm that the tables on the following tables are not broken:
- circ/waitingreserves.pl
- circ/reserveratios.pl
- patron_lists/lists.pl
- virtualshelves/shelves.pl
- acqui/invoices.pl
And with datatables:
- circ/circulation.pl
- admin/currency.pl
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Add optional embedding of YouTube videos via HTML5Media.
New syspref: HTML5MediaYouTube: Embed/Don't embed videos.
Format WEBM is hardcoded as it is the only format accepted by all
modern browsers.
Test plan:
- apply patch
- catalogue a YouTube link in 856$u
- turn on HTML5MediaEnabled and HTML5MediaYouTube
- open the record in OPAC and staff client, check that the
'Play media' tab is showing and playing the video works.
Possible enhancements for followups:
- check available formats, offer quality choice
- accept official YT URL shortener
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Works perfectly!
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Revert "Bug 15471 [QA Followup] - Fix error causing visibility button to not display"
This reverts commit 8e997fbafc.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently the 'NoRenwalBefore' setting is always based on the exact
DateTime of the due date. This patch introduces a new global syspref for
choosing if 'NoRenewalBefore' should instead be calculated based on date
only. This is only relevant for loans caluclated in days. Hourly loans
are not affected.
To test:
1) Apply bug 14101, then apply this patch.
2) Run installer/data/mysql/updatedatabase.pl
3) Confirm that a new syspref NoRenewalBeforePrecision is available
in administration. It should let you choose between 'date' (default)
and 'exact time'.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Added new systempreference OpacMaintenanceNotice.
When OpacMaintenance is ON the HTML contents of OpacMaintenanceNotice will
be displayed.
Enabling OpacMaintenance is all that is required to enable this preference.
If OpacMaintenanceNotice is undefined, the default (original) notice will
appear when OpacMaintenance is enabled.
To test:
- Enable OpacMaintenance systempreference
- Observe the default maintenance message when OPAC is viewed
- Edit OpacMaintenanceNotice systempreference, adding custom HTML
- Observe the custom HTML appear on the opac
- Remove OpacMaintenanceNotice (mindful of orphaned spaces etc.)
- Observe the default opac notice appears in the opac
- Disable OpacMaintenance
- Observce opac is back online
Moving code to atomic update and fixing merge conflict
NOTE: Accounted for an SQL typo and autoescaping of the template.
If someone else could test this, then I would be fine with
marking it signed off.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Make sure there is at least one field in PatronSelfRegistrationBorrowerUnwantedField.
2) Apply patch, and update database.
3) Check to make sure that the new system preference
PatronSelfModificationBorrowerUnwantedField has the same value as
PatronSelfRegistrationBorrowerUnwantedField.
4) Verify that the same fields are hidden for self-registering a new
borrower and edting a new one (both on the OPAC).
5) Change PatronSelfModificationBorrowerUnwantedField, and verify that
the two preferences correctly apply to editing vs. creating.
Signed-off-by: Michael Sauers <msauers@dospace.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The singleBranchMode system preference does not make sense.
Either the install has only 1 library defined or several. In both case,
we can easily guess the behavior to follow.
So the idea of this patch is to replace the fetch of this syspref with a
call to count the number of libraries defined in DB.
Test plan:
1/ From a fresh Koha install, execute the DB entry to remove the pref.
2/ Define only 1 library
3/ Confirm that Koha behaves the same as before (try to change your
library, look at the facets)
4/ Create another library (or more) and reinsert the pref and set it:
insert into systempreferences (variable, value)
values('singleBranchMode', 1);
5/ Execute the DB entry
You should get a warning message.
6/ Repeat 3.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Does what it says, but will change behaviour for any Koha install that
has 2 branches defined, One circulation, and this preference set.
If that is an acceptable change, we might need to make sure this is noted well in the
release notes.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Add column visibility menu using DataTables Buttons
Add a text filter on top of each column
Also extend page width so that the large table is better centered
Depends on bug 15285
Test plan
1. Go to Holds queue page (circ/view_holdsqueue.pl)
2. Check that table sorting and filtering work well and that you can
hide each column
3. Go to Admin > Configure columns and change the settings for this
table (Circulation > view_holdsqueue > holds-table). Verify that the
settings work by going again to the Holds queue page
4. Check that filters continue to work after hiding some columns
Tested on top of 15285, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Members::getidcity and C4::Members::GetCities simply retrieved
cities info from the cities table.
The job done in members/memberentry.pl looked really weird and complicated.
Either I have missed something, or this patch can simplify it.
The expected behavior is:
1. Create a new patron => No city selected
2. Edit an existing patron => The borrowers.city value is selected
3. Add a guarantee => The borrowers.city of the guarantor is selected
4. Edit a guarantee => The borrowers.city of the guarantee is selected
Test plan:
Confirm that the expected behaviors are the ones before and after this patch.
Signed-off-by: Natasha <tasham_8@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
Go to Circulation and ensure there are no titles on hover over the links
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1) Go to Tools -> Label Creator -> New label batch
2) Add an item
3) Click 'Remove selected items' button. Confirm message now reads "Please select at least one label to delete."
4) Click 'Remove duplicates' button. Confirm message now reads "Duplicate item(s) removed from batch number X: Y", all in bold.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Rewording Ok for translatability purpose
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
UPDATE: Making error messages the same
To test:
1) Go to Admin -> MARC frameworks
2) Click Import next to any framework. You won't actually be overwriting or importing anything as this is only a string fix, so it can be an existing framework
3) Click the Import button without attaching any file. Confirm it says "Please select a spreadsheet (.csv, .ods, .xml) file." and that this makes sense to you
4) Attempt to attach a file that is not a .csv, .ods or .xml file. You should instantly get an error message saying "Please select a CSV (.csv), ODS (.ods) or XML (.xml) file." Confirm this shows up and makes sense to you
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Rewording Ok. Works as described
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
When viewing the checkout history for a title the branchcode is
displayed. This patch alters the template to show the library name
instead.
To test, apply the patch and locate a title in the staff client which
has been checked out at least once. From the detail page, click
"Checkout history" in the sidebar. The "Checked out from" column of the
checkout history table should show the library name instead of the
branchcode.
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
I only found one confirmation dialog, all the others use javascript.
To test:
Go to Tools -> Notices and Slips
Click Delete on a notice
Confirm Yes and No options still work as expected
Check Tools module in case I missed any confirm dialogs
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1) Go to Tools -> Overdue notice/status triggers
2) Click Save changes (you don't have to change anything)
3) Confirm message now says 'Changes saved.' which is much nicer
Sponsored-by: Catalyst IT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Otherwise the label is red and a bit agressive :)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The styling of the patron image upload form causes the text to be
smaller than it should be for the main body of a page. This patch
revises the form style and cleans up the markup a bit.
This patch also adds client-side validation of the form so that a file
upload is required, and a card number is required if an image file is
selected.
To test, apply the patch and go to Tools -> Upload patron images.
1. Confirm that the text in the form is the correct size.
2. With "Zip file" selected, confirm that submitting the form is blocked
and the file upload marked as required.
3. With "Image file" selected, confirm that submitting the form
with an empty card number field is blocked and the card number
field is marked as required.
4. Confirm that uploading zip files and single images still works
correctly.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1) Notice Rotating Collections is under Patrons & Circ on tools-home.pl
2) Apply patch and refresh page
3) Notice it is now under Catalog and is in the same position it is in on the tools sidebar menu
Sponsored-by: Catalyst IT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1) Go to Tools -> Rotating Collections
2) Confirm actions (Add or remove items, Transfer, Edit, Delete) have moved into a drop down menu
3) Confirm all of the actions work as expected
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
A warning is raised when order amount exceed budget or fund this dialog needs to be styled with Font Awesome icons.
To test:
-Add orders to a basket
-Exceed a fund or budget
-Notice about the dialog alert
-Apply patch
-Exceed again and see the new icons
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch moves the following options into a "Settings" menu inspired
by the one in the advanced editor:
- Switch to advanced editor
- Show MARC tag documentation links
- Show tags
- Change framework
To test, apply the patch and open a new or existing record in the
standard MARC editor.
- Test that the 'Switch to advanced editor' button option works.
- Test that the 'Show MARC tag documenation links' option works (and
that your choice persists across sessions).
- Test that the initial settings for 'Show tags' respects the
'hide_marc' system preference.
- Test that the 'Show tags' option works (and that your choice persists
across sessions).
- Test that framework switching works correctly and that the menu
correctly reflects your choice.
- Confirm that other toolbar functions work as expected, both in regular
editing mode and Fast Cataloging.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as expected.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Test Plan:
1) Apply this patch
2) Go to circulation.pl
3) Ensure you can still override renewal limits with pref enabled
4) Ensure you can not override renewal limits with pref disabled
5) Go to moremember.pl
6) Repeat steps 3-4
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1-Checkin an item in a library other than the home branch.
2-A message will display asking to return the item to the home branch
3-You will see the phrase "Print slip )"
4-Apply patch
5-Reproduce or repeat steps 1-2 and verify the punctuation mark is
no longer displayed
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1) Go to Tools -> Patron lists
2) If there are no lists, confirm there is a message box saying 'There are no patron lists.'
3) Create a list if you do not already have one.
4) Confirm that in the 'Actions' drop down menu next to the list, the options to 'Add patrons',
'Edit', 'Delete', and 'Print patron cards' are all there and work as expected.
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch reverts some deletions made to staff-global.css in Bug 11559.
The deletions broke the appearance of the floating toolbar in system
preferences.
To test, apply the patch and clear your browser cache if necessary.
- Go to Administration -> System preferences and view a tab with enough
content to allow you to scroll and test the appearance of the floating
toolbar. Confirm that it looks correct.
- Open the advanced cataloging editor and confirm that its toolbar looks
correct.
- Open the normal cataloging editor and confirm that the floating
toolbar looks correct and works correctly.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. Tollbar looks correct
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The following actions were missing in the action filter list on
cgi-bin/koha/tools/viewlog.pl:
'ADDCIRCMESSAGE'
'CHANGE PASS'
'DELCIRCMESSAGE'
'RENEW'
'Run'
To test:
- Apply patch
- Go to Tools > Logs (viewlog.pl)
- Verify that the actions appear in the list 'Actions'
- Verify that the new entries filter the list as appropriate (in
combination with Modules: All or with a meaningful selection in
list 'Modules')
Note for testing: You have to set a date in 'Display from' to get results
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Logs work as advertised, translated in bug 13474
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
"Run" could be more explicit.
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch fixes the date and branch formatting of messages in patron
account display.
To verify:
Add a new message to a patron account from the 'checkouts' tab in staff,
the displayed date is not correctly formatted and the branch displays as code
instead as branch name
To test:
Apply patch, verify that the messages and branch names are properly formatted.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. The message dates in checkouts tab follow dateformat sypref
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
We should strive to keep as much JavaScript as possible out of templates
in order to keep things modular and maximize the benefits of browser
caching. This patch moves JavaScript out of the patron entry template
Two other minor edits: Missing semicolons added on the advice of JSHint.
To test, apply the patch and confirm that the following interactions
still work on the patron entry form:
1. clear_entry(): With ExtendedPatronAttributes enabled, the "Clear"
link next to any attribute form field should work to clear the field.
2. clone_entry(): With ExtendedPatronAttributes enabled and a repeatable
attribute defined, it should be possible to click the "New" link to
add another instance of that attribute's entry field.
3. update_category_code(): With ExtendedPatronAttributes enabled and an
attribute defined which is limited to a single patron category,
changing the patron category selection should correctly show or hide the
attribute entry form.
4. select_user(): When adding or editing a patron with a "Child"
category it should be possible to search for and select a guarantor
to add to the record by clicking the "Set to patron" button.
Selecting a new guarantor should change the text of the button from
"Set to patron" to "Change."
5. noEnterSubmit(): This function should be correctly preventing you
from hitting "ENTER" in any form field to submit the form.
6. guarantordelete(): When adding or editing a patron with a "Child"
category, it should be possible to clear existing guarantor
information by clicking the "Delete" button. Clicking the "Delete"
button should change the text of the adjacent button to "Set to
patron."
7. select_city(): With one or more cities defined it should be possible
to use the drop-down menu of cities to populate the city, state, zip,
and country fields.
8. Date of birth entry should have a maximum date limit of yesterday.
The drop-down menu of years should go back 100 years.
9. Client-side validation rules should be in effect, requiring that a
valid email address be entered in the primary email, secondary email,
and alternate address email fields.
10.When editing a patron, the "Add manual restriction" link should
display the form for adding a manual restriction, and clicking the
"Cancel" link should hide it.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
When deleting a library in Administration -> Libraries and groups, the
deletion confirmation message is not styled with the standard "dialog
alert" <div>. This patch modifies the confirmation markup to match the
standard.
Revised to include Font Awesome icons. Depends on Bug 15785.
To test, apply the patch and go to Administration -> Libraries and
groups.
- Try deleting a library. The confirmation box should have the standard
"dialog alert" class.
- Test the 'confirm' and 'cancel' actions and make sure both complete
correctly.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Buttons display as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch removes the link 'return to where you were before' from
syspref search result page after failing search.
To test:
- Apply patch
- Go to System preferences in staff client, do a search
with something that does not exist
- Verify that a message pops up that does not contain the link.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The JavaScript embedded in the MARC subfields structure template is not
dependent on template processing and can safely be moved to a separate
file. This patch does so. Removed in the process is some lines which
were commented out.
To test, apply the patch and go to Administration -> MARC framworks.
- Click 'MARC structure' for a framework you can edit.
- Click 'subfields' for a tag you can edit.
- Click 'Edit' for a subfield you can edit.
- Confirm that tabs and accordian sections work correctly.
- Make changes under Advanced constraints -> Visibility and confirm
that they are saved correctly.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch corrects minor errors in staff-global.js according to
warnings raised by JSHint.
To test, apply the patch and run JSHint on staff-global.js. No warnings
should be raised.
To confirm that the behavior of the JS is not changed, clear your
browser cache if necessary and:
- Confirm that the "Help" link opens the help window.
- Confirm that audio alerts work with local and remote sound files
- Confirm that the format() method is still working correctly by, for
instance, opening the detail page for a bibliographic record with
multiple items and choosing 'Edit -> Delete record' from the menu. The
error message should read like "2 item(s) are attached to this
record..."
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. No errors with JSHint CLI (6 errors fixed)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch corrects minor errors in the staff client's basket.js
according to warnings raised by JSHint.
To test, apply the patch and run JSHint on basket.js. No warnings
should be raised.
To confirm that the behavior of the JS is not changed, clear your
browser cache if necessary and:
- Test adding multiple titles to the Cart from staff client search
results.
- Confirm that adding titles to the Cart triggers a message by the Cart
link.
- Test clicking the "Cart" link in the header menu when the Cart popup
is open but behind the main window.
- Testing emptying the Cart.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. No warnigns raised with jshint tool
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The librarian needs CAN_user_circulate_circulate_remaining_permissions
to see the checkouts patron's information.
Test plan:
The "Patron" column of the checkout history page should only be
displayed of you have the circulate > circulate_remaining_permissions
permission.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The tables using the treetable plugin don't display correctly (with JS
error).
The lazy way to fix it is to redefine the dom of the table and remove
the button area (B).
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The checkouts, currency and items lost tables redefine the dom/sDom and
the older C(olvis) should be replaced with the current B(utton).
Test plan:
To test the whole patch set, you will have to test the 4 tables impacted
by this patch as well as the others using the columns settings.
The additem has specific code and should be tested keeping that in mind.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch moves the Button area all tables which does not redefine the
dom/sDom DT parameter.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The ColVis DataTables plugin is now retired.
We need to upgrade the plugin to 1.10.10 and use the column visibility
module for Buttons.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
It doesn't make sense to offer the option to translate an item type
description into another language if there is only one language
installed.
Test plan:
Generates templates for only 1 language
Edit an item type and confirm that the link "translate into..." is not
displayed.
Generates templates for another language
Confirm that the link is now displayed.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To Test -
1. Go to Serials and search for a title and then click on it.
2. Click routing list and then Add recipients.
3. Search for a patron.
4. Using the tab key try to navigate onto the Add link.
5. Notice it skips Add.
6. Apply the patch and then repeat steps 1-4, notice the Add link can now be accessed through using the keyboard.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
In this patch I have fixed the 'Remove selected items' button.
I have also added a 'Delete batch' button like there is in the Patron Card Creator.
To test:
1) Go to Tools -> Label creator -> New label batch
2) Add 2 items
3) Select the checkbox next to an item you just added and click 'Remove selected items'
4) A pop-up will say that you are yet to select an item. (Please ignore the mistake in the pop-up message, this is being fixed in Bug 15662)
5) Apply patch and refresh. Confirm there is now a 'Delete batch' button in the toolbar
6) Select one item and click 'Remove selected items'
7) Confirm the item is deleted from the batch
8) Select the final item and click 'Remove selected items'
9) Pop-up message will tell you that deleting this item will delete the batch. Click 'Okay'
10) Click 'Delete batch' then 'Okay'
11) Confirm you are redirected to the Labels page and the batch has been deleted.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
When checking in an on-hold item which is waiting, the "Cancel" button
cancels the hold, so it should say so. This patch changes the text.
This patch also moves the 'cancel hold' button to the middle, on the
theory that buttons on the left should default to 'confirm' and buttons
on the right should generally imply 'cancel'--as in 'do nothing.' Moving
it to the middle seems like a good place to put it where users will have
to think about clicking it.
To test:
1. Find an hold which has been made 'waiting,' or check in an confirm a
pending hold at your library.
2. Check in that item again and verify that the 'Hold found' dialog
contains a 'Cancel hold' button which works to cancel the waiting
hold.
3. Repeat the process and confirm that the functionality of the other
buttons is unchanged.
Followed test plan, works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The CardnumberLength system preference defines card number minimum and
maximum allowed values when adding a patron. This information is
currently hidden in a title attribute on the card number input field.
This patch moves the information into a <div class="hint">, matching
other fields in the entry form which offer details about entry
guidelines.
To test, apply the patch and open the new patron entry form. Test for
various values of CardnumberLength, and with 'cardnumber' mandatory or
not mandatory as defined in BorrowerMandatoryField.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
I have only changed this in the includes for the tabs at the top.
Dependent on Bug 12051 as that patch adds extra tabs to the top which would need to be changed later
To test:
1) Apply Bug 12051 first, then this patch
2) Ensure that Check Out/Check In/Renew tabs still work as they should
3) Check patch for errors or pages I've missed
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
2 links are wrong on the renew page, because item.biblioitemnumber does
not return the biblioitemnumber as expect the template.
Test plan:
Renew an item and check the item link.
It should contain a valid biblioitemnumber for the 'bi' parameter.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Link repaired. At first glance, I am wondering if biblioitemnumber is
of actual use here; is it only passed back and forth between script and
template?
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
If set to Yes, OPAC search results and details will include buton from
Open Library Raed API.
In addition, Number of titles held in Open Library and the results link
will be reported on the search results screen.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
UPDATE: Added to checkin-search.inc to show up on returns.pl
To test:
1) Apply patch
2) Confirm that there is now a Renew tab on the pages where there is also a Check-in tab only
3) Attempt to renew a book using this, confirm it works as expected
4) Check if I have missed any pages
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
If a MARC framework is in use by any records it should not be possible
to delete it. Deleting a framework which is in use will leave the
deleted framework code in those records.
This patch modifies the deletion confirmation dialog so that it will not
let the user confirm the deletion if there are records using it.
Depends on Bug 15785 - Use Font Awesome icons in confirmation dialogs
To test, apply the patch and go to Administration -> MARC frameworks
1. Try to delete a framework which is in use by 1 or more records. The
resulting confirmation dialog should prevent you from proceeding.
2. Try to delete a framework which is not in use. Test both canceling
and confirming that deletion to make both function correctly.
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
We can simplify the staff client's CSS and reduce some image file usage
if we modify confirmation dialogs to use Font Awesome icons. This patch
makes this change for Administration templates.
This patch includes some whitespace changes, so please consider that
when looking at diffs.
To test, apply the patch and test deletion in the following cases. Test
both confirmation and cancel actions.
Administration -> Budgets -> Delete budget
Administration -> Funds -> Delete fund
Administration -> Authority types -> Delete authority type
Administration -> Authority types -> MARC Structure -> Delete tag
Administration -> Authority types -> MARC Structure -> Subfields -> Delete
Administration -> MARC bibliographic framework -> Delete framework
Administration -> MARC bibliographic framework -> MARC structure -> Delete
Administration -> Cities and Towns -> Delete city
Administration -> Classification sources -> Delete classification source
Administration -> Classification sources -> Delete classification filing rule
Administration -> Item types -> Delete
Administration -> Record matching rules -> Delete
Administration -> Patron attribute types -> Delete
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. Icons changed
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
delete 'expected' and 'supexpected' ids that don't seem useful anymore.
Same thing for changeDate2 function
Test plan :
1) Search a serial subscription from the Serials Home page
2)Go to serial collection page and make sure it has a mimimal bunch of
already received or missing issues
3)Check some received issues to be sure to get extra issues (not only
the extected one) in the serial edition page
4) Click on Edit serials button
5) Try to modify whatever date in 'Expected on' column (excepted first
one) using datepicker :
You can see that the top date of the column is updated instead of the
choosen one.
6) Apply patch and redo 1 to 5 steps :
now the right date is updated.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Bug 14821 removed the items which were not checked out, but some
libraries considered it as a bug.
So let's add a new pref to control this behavior.
Test plan:
0/ Execute the updatedb entry and set ShowAllCheckins to "Do not show"
(default)
1/ Check an item in.
If the item was not checked out, it won't be listed
2/ Turn the pref to "Show"
3/ Check an item in
If the item was not checked out, it should be listed
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* Change links to buttons
* Add warning class to delete button if provider is being used
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nearly all cellular providers allow a person to send an text message to a cellular
phone by sending an email to phonenumber@provider. We can leverage this capability
to add the ability for Koha to send sms messages to patrons without the need to
subscribe to an sms gateway server.
Basic plan:
1. Add a table sms_providers to the db to tell Koha what service providers are available, and what domain emails should be sent to.
2. Add borrowers.sms_provider_id to tell Koha which mobile service the patron subscribes to for the number given in smsalertnumber
3. Modify Koha to send an email rather than using SMS::Send if the driver is set to 'Email'
Test plan:
0) Get a mobile phone
1) Apply the patch
2) Run updatedatabase.pl
3) Set the value of SMSSendDriver to 'Email'
4) Go to the admin page, the "Additional parameters" area should now have the link "SMS cellular providers"
5) On this page, add some providers. Make sure to add the provider for your own cellular phone service.
Here are some examples:
Sprint phonenumber@messaging.sprintpcs.com
Verizon phonenumber@vtext.com
T-Mobile phonenumber@tmomail.net
AT&T phonenumber@txt.att.net
Only add the domain part in the 'domain' field. So for Verizon, that would be 'vtext.com'
6) Create an account for yourself, add your SMS number, and select your provider from the dropdown box directly below it.
7) Enable SMS messaging for Item check-in and Item checkout
8) Check out an item to yourself
9) Run process_message_queue.pl
10) Wait! You should receive a text message shortly, when I tested it, I received my sms message within the minute.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Changes to Italian and Polish sql files and catalogue help file.
TEST PLAN
---------
1) Confirm sql is valid and has Non-fiction.
> delete from auth_vals;
> source {appropriate file};
2) Staff -> Search -> Help
-- Confirm Non-fiction
3) Run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
To test:
1) Apply patch
2) Run updatedatabase.pl
3) Go to advanced search in Staff Client (ie /cgi-bin/koha/catalogue/search.pl)
4) Confirm that it says 'Non-fiction' in the 'Any content' drop-down menu under 'Subtype limits'
5) Go to item search (ie /cgi-bin/koha/catalogue/itemsearch.pl)
6) Confirm that it says 'Non-fiction' under 'Collection code'
7) Go to advanced search in OPAC (ie /cgi-bin/koha/opac-search.pl) and click 'More options'
8) Confirm that it says 'Non-fiction' in the 'Content' drop-down menu
9) Go to the details page for a non-fiction book in the OPAC (ie /cgi-bin/koha/opac-detail.pl?biblionumber=2) and click 'Holdings' tab
10) Confirm that it says 'Non-fiction' under 'Collection' heading
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Revert "DBRev to make notes of the XSS patches and the new important dependency."
This reverts commit e140603a59.
Revert "Bug 13618: Specific for branches.opac_info"
This reverts commit 06e4a50f00.
Revert "Bug 13618: (follow-up) Specific for other prefs"
This reverts commit d6475a111f.
Revert "Bug 13618: Fix for debarredcomment and patron messages"
This reverts commit dd98c9df92.
Revert "Bug 13618: Do not display html tags in patron's notices"
This reverts commit a065b243fe.
Revert "Bug 13618: Do not display and html tags in item fields content"
This reverts commit baeeaffbf8.
Revert "Bug 13618: Fix for system preference description"
This reverts commit a967a09261.
Revert "Bug 13618: Remove html filters for newly pushed code"
This reverts commit 0e98662b10.
Revert "Bug 13618: (follow-up) add missing lines for opac-shelves"
This reverts commit fc2fb605e5.
Revert "Bug 13618: (follow-up) Specific for ColumnsSettings"
This reverts commit bc308fdd9c.
Revert "Bug 13618: Fix for edit biblios and items"
This reverts commit 811c4e8402.
Revert "Bug 13618: followup to remove tabs"
This reverts commit ca8e8c397c.
Revert "Bug 13618: Fix last occurrences recently introduced to master"
This reverts commit bb417b256b.
Revert "Bug 13618: Fix for news"
This reverts commit ae5b98020a.
Revert "Bug 13618: Fix escape on sending baskets or shelves by email"
This reverts commit a7731ffe25.
Revert "Bug 13618: Specific for XSLTBloc"
This reverts commit 11fa38dc29.
Revert "Bug 13618: Specific for Salutation on editing a patron"
This reverts commit 36c07ad6d3.
Revert "Bug 13618: Specific for other prefs"
This reverts commit e6ea281a3b.
Revert "Bug 13618 - memberentrygen.tt errors Not a GLOB reference"
This reverts commit 7824874557.
Revert "Bug 13618: Specific for ColumnsSettings"
This reverts commit 1834da3da3.
Revert "Bug 13618: Specific for IntranetUser* and OPACUser* prefs"
This reverts commit 21ae62b253.
Revert "Bug 13618: Fix error 'Not a GLOB reference'"
This reverts commit 602bdbab4c.
Revert "Bug 13618: Specific for the ISBD view"
This reverts commit d254362435.
Revert "Bug 13618: Specific for pagination_bar"
This reverts commit 8837a8ae68.
Revert "Bug 13618: Specific places where we don't need to escape variables - intra"
This reverts commit 00eff140b3.
Revert "Bug 13618: Remove html filters at the intranet"
This reverts commit 7db851ff03.
Revert "Bug 13618: Specific places where we don't need to escape variables"
This reverts commit 49a3738b8d.
Revert "Bug 13618: Remove html filters at the OPAC"
This reverts commit cedaa0e23e.
Revert "Bug 13618: Use Template::Stash::AutoEscaping to use the html filter"
This reverts commit 01b38d3b13.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To verify:
- Download attachment 'Goethe with umlaut' from Bug 15684
- Go to Tools > Quote Editor
- Click "Import quotes" and select the file
- The quotes display in a table. Click 'Sav quotes'
- Result: Nothing happens
To test:
- Apply patch
- Repeat steps above
- Verify that you get a message '2 quotes saved' and that the quotes
are added in to the quotes table
- Test with attachment 'sample quotes' as well
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Bug 8064 (Merge several biblio records) change some code used in both
biblios and authorities merge tool without updating the authorities
merge tool.
This patch fixes that.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
follow-up for SlipCSS and printslip
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Note that there might be other occurrences to fix!
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
If a syspref description contains html tag, do not display them
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
On editing biblios or items, the marc_lib, marc_value and javascript
values are often populated with html code which needs to be displayed
raw.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
This followup on top of remote branch
Only remove tabs and trailing spaces to make koha-qa pass
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Test plan:
Send baskets and shelves by email.
With or without this patch, you should not see any changes.
Signed-off-by: Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Like Jonathan said:
The interpolation of a variable on including a file caused an unexpected
error:
Template process failed: undef error - Not a GLOB reference at
/usr/lib/i386-linux-gnu/perl5/5.20/Template/Provider.pm line 619.
Replaced it with a SWITCH, like the other patch for this similar error.
Signed-off-by: Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The interpolation of a variable on including a file caused an unexpected
error:
Template process failed: undef error - Not a GLOB reference at
/usr/lib/i386-linux-gnu/perl5/5.20/Template/Provider.pm line 619.
The easier fix is to replace it with a SWITCH.
Signed-off-by: Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Test plan:
Add/edit/remove item types from the administration module
(admin/itemtypes.pl).
You should get message feedback after each action.
Don't forget to play with the image and try to remove an item type
linked to records (you should not be able to remove it).
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch mainly replaces C4::ItemType->all with
Koha::ItemTypes->search.
Test plan:
At the places where the C4::ItemType module was used, confirm there is
no regression:
- acqui/neworderempty.pl
- catalogue/itemsearch.pl
- admin/item_circulation_alerts.pl
and the 2 cataloguing plugins:
- marc21_linking_section.pl
- unimarc_field_4XX.pl
QA step:
prove t/db_dependent/HoldsQueue.t should return green
Note that the tests were buggy.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Followup changes text from "The user can reset | can not reset their password on OPAC" to "Library users are allowed | not allowed to recover their password via e-mail in the OPAC"
This change more clearly differentiates the purpose of this new preference from OpacPasswordChange.
Bug 8753 - followup - update text for link to match common UI paradigms, fixes OpacPublic disabled view
Also corrects OpacNav being included on the reset page on private catalogues.
Updated the link for forgotten passwords to more closely match common UI paradigms, i.e. Facebook and Twitter
To test:
apply all patches, link should now be the less verbose "Forgot your password?"
disable OpacPublic, anything in opacnav should not appear (you may need to add something to opacnav to test properly)
Bug 8753 - [followup] fix the title on opac-password-recovery.tt
The title stanza was missing a <title></title> around it, causing the extra text to appear.
To test, apply all patches and make sure it looks ok and there is no extra text at the top or bottom of the page.
Bug 8753 - [followup} Correcting spelling mistakes
Make sure it all still works
Bug 8753 - [followup] fix error when no information is provided
To test:
All normal checks plus make sure that a nice error is displayed when no data is provided.
fixing the deprecated thing
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
I've addressed a lot of Liz Rea's points.
1. I have moved the code from updatedatabase.pl and kohastructure.sql to a file in the atomicupdates directory.
1a. The feature is now off by default when the atomicupdate is run.
2. The password reset link is now visible on the home page, in the modal box and on opac-user.pl .
3. The password recovery pages now use bootstrap markup.
4. I am unsure here. I see "New Password:" and "Confirm new password:".
5. This should still work :).
6. I could not reproduce.
7. I have added the userid field.
You can now reset the password by submitting either your useid or email address.
Both fields can be filled, but the email address must be one of the borrower's (email, emailpro or b_email).
When entering only the email address and two borrowers use that same address, the system tells the user to try with another address or to specify his userid.
8. The text is in the atomicupdate file. Have at it, anyone.
Concerning the email. It is inconvenient for the use to have to wait X minutes for the message queue the be processed.
Maybe we could add a sub in Letters.pm that:
Takes the same argments as EnqueueLetter
Sends the letter.
Saves the letter in the message queue with a 'sent' status.
TEST PLAN:
Setup)
1) apply the patch
2) go to system preferences OPAC>>Privacy and set 'OpacResetPassword' to ON.
2b) make sure that OpacPasswordChange is also ON.
A)
1) refresh front page, click on 'Forgot your password' and enter a VALID address
1b) Also try an INVALID address (valid yet not in your koha db). An error message will show up.
2) An email should be received at that address with a link.
3) Follow the link in the mail to fill the new password.
Until a satisfactory new password is entered, the old password is not reset.
4) Go to main page try the new password.
B)
1) Repeat the password reset, this time use the userid (username) field.
2) Try to reset the password using a userid and an email not linked to the account. An error appears.
3) Make sure the borrower has many available email addresses.
4) For each email, reset the password using both the userid and the email. The link should be sent to the specified address
C)
1) Make sure two borrowers use the same email.
2) Repeat the reset procedure in test case A). An error message appears
http://bugs.koha-community.org/show_bug.cgi?id=13068
Author: Maxime Beaulieu <maxime.beaulieu@inlibro.com>
Followed test plan. Works as described.
Signed-off-by: Marc Veron <veron@veron.ch>
New sign-off after testing all patches together
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This patch allows to put a hold on an item that is already checked out or reserved.
To test:
- Check out an item A
- Put a hold on an item B
- Verify that the staff user has permission to put holds
- Check out item A to a patron X
- Try to checkout item A to a patron Y
- Verify that you see underneath the buttons for Checkin/Checkout a link
with following text: "Click here to place hold for [Patron X' name]"
- Verify that the link is stylable (div class circ-scheckoutplacehold)
- Verify that the link takes you to the page to place a hold on this biblio
for patron Y
- Do the same for item B and verify that it works for reserved items as well.
- Repeat steps above for a patron who has restrictions, verify that the link
does not appear
- Log in with a staff member who has no permission to place holds
- Repeat steps above for a patron without restrictions, verify that the link
does not appear.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
1/ Do not allow invalid date ranges (from > to) (datepicker only)
2/ Relabel "From:" to "From" for consistency
3/ Fix MIME type for CSV
4/ Use Koha::DateUtils instead of C4::Dates
5/ Use placeholders in SQL query
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
$hasdewey and $haslccn were hardcoded to 0
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
- Add 3 options for cells value
- Titles count "COUNT (biblionumber)"
- Items count "COUNT (itemnumber)" (current behavior)
- Deleted items count "COUNT (deleteditems.itemnumber)"
- Add to selectable rows, colums and filters:
- items.notforloan
- items.materials
For each of these fields, retrieve the label in the default cataloging
framework.
If no MARC field is mapped to the field in question, it does not show
this line in the wizard.
If the MARC field is associated with a list of authorized values, it
displays a dropdown list for the filter, otherwise it displays a text
field.
- Add to selectable rows, columns and filters:
- items.dateaccessioned (creation date)
- deleteditems.timestamp (deletion date) (Only if the third option (eg
count deleted items) is selected)
- Add unit tests for GetMarcSubfieldStructureFromKohaField
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
'Withdrawn' is an authorised value just like 'Lost' and 'Damaged,' so
the item detail screen should offer the same means of selecting one of
multiple values.
This patch re-uses the same template markup and code 'Lost' and 'Damage'
use to make it possible to select a specific withdrawn value.
To test you should have multiple values entered for the authorised value
category 'WITHDRAWN'.
1. Apply the patch and locate any record in the catalog.
2. From the detail screen, click the barcode in the items table to go to
the item detail page.
3. Confirm that there is a dropdown list of choices for 'Withdrawn
status.'
4. Try both setting and unsetting various withdrawn statuses.
5. Confirm that setting Lost or Damaged statuses.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
When Koha export a bibliographic record to DC, makes it in XML format.
This XML not follows the DC-XML recommendations as should be: elements
in uppercase eg. dc:Date, dc:Creator, section 4.2, recommendation 4
explain that "The property names for the 15 DC elements should be all
lower-case." eg. dc:date, dc:creator" and section "4.3 Example - a
simple DC record", xsi:schemaLocation="http://example.org/myapp/http://example.org/myapp/schema.xsd" schema does not exist.
NOTE: This new feature implement the XSLT transformation for OAI-DC,
SRW-DC and RDF-DC
Test plan
---------------
1) Download Dublin Core file from record detail page. Open up the file,
and make sure that the document not follows the DC-XML
recommendations as should be.
2) Apply patch.
3) Go to whichever bib record in OPAC or staff and click on Save >
Dublin Core. A modal will display, prove all options.
4) Change the system preference 'Opac ExportOptions' by enabling and
disabling Dublin Core and try to download a record.
5) Try several bibliographic records in any format (book, magazine, DVD,
etc.) to confirm that properly exported.
6) Test with all marc flavours.
Sponsored-by: Universidad de El Salvador
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This enhancment adds the ability to suspend and resume individual holds
from the holds table on circulation.pl and moremember.pl.
The interface is inspired/cribbed from the same feature already
available in the opac.
Test Plan:
1) Apply this patch
2) Find a patron with holds
3) Suspend a hold with no resume date
4) Resume the suspended hold
5) Suspend a hold with a resume date
6) Resume the suspended hold
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Cathi Wiggins <CWIGGINS@ci.arcadia.ca.us>
Signed-off-by: Megan Wianecki <mwianecki@mplmain.mtpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To test:
Enable Amazon images for the staff client - syspref: AmazonCoverImages -> Show
Go to a record detail in the intranet that has an Amazon image, inspect it, and make sure that it
1. Shows
2. has https://images-na. and not http://images.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
