The current situation is that biblio-level holds can be assigned an item
type, so they can only be fulfilled by items matching that specified
item type (be it item-level itype or the fallback to biblio-level).
But there's the situation in which max holds limits for a specific item
type can be overridden by using biblio-level holds with item type
selection (AllowHoldItemTypeSelection) enabled.
To test:
1. Have a patron of category 'Staff' (S)
2. Have 3 records with items with the 'BK' item type, and maybe others
3. Enable AllowHoldItemTypeSelection
4. Set a limit of 2 max holds for that category+item type
5. In the OPAC. Place bibio-level holds, with item type contraint to 'BK' on those 3 records
=> FAIL: You can place the 3 holds
6. Cancel the holds
7. Apply this patch and restart all
8. Repeat 5
=> SUCCESS: You can only place 2 holds
9. Run:
$ kshell t/db_dependent/Reserves.t
=> SUCCESS: Tests pass!
10. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Improve age restriction message.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There were several templates where we were still using the term
"reserve" instead of "hold." This patch corrects the ones I found,
including in a couple of HTML comments.
To test, apply the patch and confirm that the changes look correct and
affect only the relevant term.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch corrects the word "PLease" to "Please." The patch also adds
some periods at the end of some alert strings to make punctuation
consistent between different alerts.
To test, an inspection of the patch is probably enough. The main fix
(the "PLease") only appears when an unknown error occurs.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When showing an authority, there is a link to search biblio records it is used in.
Actually this link uses 'q=an=$auth_id', this is wrong for an URL, and other places use 'idx:value'.
It does not break search with Zebra nor Elasticsearch but it is better to use ':'
Test plan :
Check changed links return same results with and without patch
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds an additional system preference check to the part of the
OPAC bibliographic detail template which conditionally loads Babelthèque
JavaScript. The script tag should not be output if there is no
Babeltheque_url_js setting to use.
To test, apply the patch and search for "Babeltheque" in system
preferences.
- Set "Babeltheque" to "Do" include information.
- Enter a path in the "Babeltheque_url_js" preference, e.g.
"https://www.example.com/example.js" It doesn't have to be a valid
Babeltheque URL.
- In the OPAC, view the bibliographic detail page for any title. If you
used a dummy URL for the js preference you should see an error in the
console about the file not being found. This confirms that the
template logic is working. If you used a working Babeltheque URL then
the corresponding content should load.
- Return to system preferences and remove the URL from the
"Babeltheque_url_js" preference.
- Return to the bibliographic detail page in the OPAC and confirm that
there is no warning in the console about "'src' attribute of <script>
element is empty."
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch fixes the calendar.inc includes in both staff and OPAC in
order to remove a typo: An extra space in the check for the "dateformat"
system preference.
The result of this error is that changes to the dateformat system
preference will not be correctly applied to Koha without a restart.
To reproduce the problem start the process of creating a new patron.
- In the date of birth field, select a date. The format of the date
inserted should match your current dateformat system preference.
- Go to Administration -> System preferences and update dateformat to
something different.
- Go back to the patron creation form (refresh it if necessary).
- The hint under the Date of birth field will match your updated system
preference, but when you pick a date using the calendar widget it
will still be formatted according to the old value of dateformat.
To test the fix, apply the patch and run through the same steps above.
A change the dateformat preference should be immediately reflected in
the functionality of the calendar widget.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch corrects the path of an image specified as the background to
a couple of elements in the OPAC. The incorrect path was causing 404
errors.
To test, apply the patch and rebuild the OPAC CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- If necessary, activate one or more cover image services in
Administration, e.g. OPACAmazonCoverImages, OPACLocalCoverImages,
and/or OpenLibraryCovers.
- In the OPAC, locate a bibliographic record which has a cover image
from one or more of the services you activated.
- On the detail page for that record, the cover should load correctly.
- In the browser console you should see no errors related to a file not
found: /opac-tmpl/bootstrap/img/spinner-small.gif
- In the browser console, submit this JavaScript snippet:
$(".cover-image").remove();
The cover image should disappear, revealing the "spinner" icon behind
it.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch wraps the List RSS icon in a check on whether the list is
public. Private lists RSS can only be accessed by a logged-in patron.
To test apply the patch and view a public list in the OPAC. You should
see an RSS link icon next to the list title.
Now log in to the OPAC and view a private list. There should be no RSS
link.
Note the QA tool warning about the aria-hidden attribute is a false
positive. The parent element has a label.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch corrects the is_valid_date function in the OPAC and staff
interface so that it work correctly with Flatpickr.
To test, apply the patch and clear your browser cache if necessary.
- In the staff client, locate a bibliographic record and edit its items.
- Test that the "Date acquired" date picker works correctly and that
there are no errors in the browser console.
- Test other date input fields to check that they still work, e.g.
specify due date during checkout; Catalog statistics wizard; Patron
entry/modification, etc.
- Perform similar tests in the OPAC: Hold suspension; Update your
personal details.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a new page opac-reset-password where a user cna enter their login
(userid or carndumber), current password, and new password.
If the user has a password expiration date and the current password is correct and
the new passwords match and meet requirements their password will be updated and the
expiration date reset
A patron whose password does not expire will be reidrected to login to change their password
To test:
1 - Apply patch, updatedatabase, enable new syspref EnableExpiredPasswordReset
2 - Set 'Password expiration' for a patron category
Home->Administration->Patron categories->Edit
3 - Create a new patron in this category with a userid/password set, and an email
4 - Update the patron with an expiration to be expired
UPDATE borrowers SET password_expiration='2022-01-01' WHERE borrowernumber=51;
5 - Give the borrower catalogue permission
6 - Attempt to log in to Straff interface
7 - Confirm you are signed out and notified that password must be reset
8 - Click 'Reset your password' link
9 - You should see the reset password page with fields for: login, current password, new password, conmfirm password
10 - enter invalid/incomplete credentials
11 - Confirm you are notified of invlaid credentials
12 - Fill in all fields, but enter current password as new password
13 - Confirm you are notified of no change
14 - Set minimum password length / strong password requirement for category
15 - Confirm you receive error if new password too short or not secure
16 - Enter a valid new password and submit and confirm update is successful
17 - Confirm you have buttons to go to OPAC or Staff and that both work
18 - Confirm you cna log in (i.e. expiration has been reset)
19 - Expire the users password
20 - Remove catalogue permission
21 - Reset password again and confirm only OPAC link
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If the passed credentials are wrong, we shouldn't expose things like the
password is expired.
This patch takes care of that.
To test:
1. Have a known patron with password_expiration_date set so its
password is expired. Can be done like:
$ koha-mysql kohadev
> UPDATE borrowers \
SET password_expiration_date='2022-04-25' \
WHERE borrowernumber=132;
Note: change the borrowernumber
2. Attempt to login to the OPAC with wrong credentials
=> SUCCESS: You are rejected, with a message telling credentials are
wrong
=> FAIL: You are told the password is expired.
3. Apply this patch and restart Plack
4. Repeat 2
=> SUCCESS: You are rejected, credentials are wrong and no mention to
password being expired.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
- The atomicupdate didn't have "bug_number" defined.
- The "Your password has expired" message is now styled with the same
class as other OPAC login messages.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds the ability to define password_expiry_days for a patron
category.
When defined a patron's password will expire after X days and they will
be required to reset their password. If OPAC resets are enabled for the
catgeory they may do so on their own, otherwise they will need to
contact the library
To test:
1 - Apply patch, updatedatabase
2 - Set 'Password expiration' for a patron category
Home-> Administration-> Patron categories-> Edit
3 - Create a new patron in this category with a userid/password set,
and an email
4 - Confirm their password_expiration_date field is set
SELECT password_expiration_date FROM borrowers WHERE borrowernumber=51;
5 - Create a new patron, do not set a password
6 - Confirm their password_expiration_date field is NULL
7 - Update the patron with an expiration to be expired
UPDATE borrowers SET password_expiration_date='2022-01-01' WHERE borrowernumber=51;
8 - Give the borrower catalogue permission
9 - Attempt to log in to Straff interface
10 - Confirm you are signed out and notified that password must be
reset
11 - Attempt to sign in to OPAC
12 - Confirm you are signed out and notified password must be reset
13 - Enable password reset for the patron's category and perform a
password reset
Note: you will have to find the link in the message_queue unless
you have emails setup on your test environment
SELECT * FROM message_queue WHERE borrowernumber=51;
14 - Confirm that you can now sign in and password_expiration_date field
is set 10 days in the future
15 - Expire the patron's password again
16 - Change the patron's password via the staff interface
17 - Confirm they can sign in and the expiration is updated
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the new modal to use the /public version of the
libraries endpoint for fetching library data. This ensure the feature
works as expected prior to patron login.
This patch updates the three scripts that fetched the soonest renewal date
to use the return from CanBookBeRenewed
To test:
1 - Set a circulation rule with a 'no renewal before' set to 3, loan length set to 5
2 - Check out an item to a patron that uses this rule
3 - Verify the checkouts for the patron show the correct 'No renewal before' date
4 - Sign in to the patron's opac account
5 - Verify the item shows it cannot be renewed, and shows the correct date
6 - Go to Circulation->Renew
7 - Attempt to renew using barcode
8 - Confirm error shows the soonest renewal date
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
First patches were written in 2015 - so I think we can safely
move the hint closer to the present.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch formats the copyright date so that only the year shows before
plugging the formatted version into the form.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Add new jQuery plugin "autofill" which transforms selected element(s)
into search fields for Google Books API and automatically fills
requested fields with search result.
Use in OPAC purchase suggestions to automatically fill out fields when
entering ISBN-number.
Test plan:
1. Run updatedatabase.pl
2. Enable system precference "OPACSuggestionAutoFill"
3. Log into OPAC and go to purchase suggestions page
4. Write a valid ISBN (such as 0-9690745-2-2 or 978-1-78416-110-1) into
the ISBN field and click the 'search google books' button, or unfocus
the field.
5. Title, Author, Publisher, publication year and Item Type fields should now be filled
automatically.
6. Press "clear form" to undo - should restore all fields that the API pull
filled to empty
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the recalls page in the OPAC so that it uses
Flatpickr for the "Recall not needed after" field.
To test apply the patch and enable the UseRecalls preference if
necessary. You made need to update your circulation rules as well,
defining some default values for recalls.
- Log in to the OPAC.
- Locate a bibliographic record which has one item and that item is
checked out.
- Click "Place recall."
- The "Recall not needed after" field should be styled correctly, and
clicking it should trigger the calendar popup.
- You should be limited to selections after today's date.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
As asked on comment4:
[1] Add a required div as a visible hint when applicable.
[2] Differentiate alert for hold start and end date.
Test plan:
See former patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Side note: Template still referred to class holddateto while not
being used any longer. Replaced this occurrence by futuredate.
Test plan:
[1] Disable OPACAllowHoldDateInFuture.
[2] Set pref OPACMandatoryHoldDates to "end date".
[3] Verify that the end date is mandatory on opac-reserve.
[4] Set pref OPACMandatoryHoldDates to "start date".
[5] Verify that no dates are required.
[6] Enable OPACAllowHoldDateInFuture.
[7] Verify that start dates are required.
[8] Set pref OPACMandatoryHoldDates to "no dates".
[9] Verify that no dates are required again.
Bonus:
Check that more options box is opened when a date still is required.
In case of item level being forced, verify that more options is opened
regardless of pref setting.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds the new CSS to the global CSS file. Rebuild the OPAC CSS
to test.
The patch also moves the JavaScript for the button from opac-bottom.inc
into global.js and adds accessibility labels to the generated markup.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Like in many websites, when scrolling down the page make a button appear to go back to top.
This can be very useful specially in search results page.
This patch adds to OPAC using Javascript a button with id "backtotop".
Button appears when 300 pixels from top are hidden.
This value may be adapted.
Test plan
1) Go to OPAC
2) Perform a search with many results
3) Scroll down
=> Back to top button appears
4) Manually scroll back to top
=> Button disappears
5) Scroll down and click on Back to top button
=> You get to top
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch addresses one specific case.
To test:
1. Run:
$ kshell
k$ cd misc/translator
k$ perl translate update es-ES
2. On your git checkout run:
$ git diff | grep '\[% limit or'
=> FAIL: That shouldn't be translated
3. Run:
$ git reset --hard HEAD
4. Apply this patch
5. Repeat 1 and 2
=> SUCCESS: No attempt to translate that tag
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the OPAC authority search results page so that it
uses the term "record" instead of "biblio."
The patch also changes how the template outputs the count of records so
that it is correctly pluralized, e.g. "1 record" vs. "2 records."
To test, apply the patch and perform an authority search in the OPAC.
In the search results, confirm that the last table header reads
"Records." The information in that column should be correct, using the
word record or records.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
With these patches, jQuery versions in the OPAC and staff interface are
both updated to 3.6.0. The latest version of jQuery Migrate is installed
to allow us to take a slower approach to updating out-of-date syntax.
To test, apply the patch and try as many pages as you can, paying
attention to the browser console to watch for errors.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
jQuery is upgraded from 2.2.3 to 3.6.0.
jQuery Migrate is upgraded from 1.3.0 to 3.3.2.
The next patch will update links to point to the new assets.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To be nicer with translators.
Update the PO files for whichever languages will show how this is
useful.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
Same as former patch. Use OPAC adv search here.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch proposes to add a Bootstrap tooltip to the OPAC masthead's
search field to indicate to the user when SearchMyLibraryFirst is in
effect. I think this lets the form layout stay clean-looking and is more
informative to the user because they don't have to look for the HTML
title tag tooltip.
To test, apply the patch and rebuild the OPAC CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go to Administration -> Global system preferences.
- Set the OpacAddMastheadLibraryPulldown preference to "Don't add."
- Set the SearchMyLibraryFirst preference to "Limit."
- Go to the OPAC and confirm that the main search field in the masthead
has a filter icon in the background, indicating that searches will be
limited.
- Hover your mouse over the search field and a tooltip should pop up,
"Searching in <library> only"
- The message should also be triggered when you click inside the form
field.
- Change the OpacAddMastheadLibraryPulldown and SearchMyLibraryFirst
preferences again and the form should return to its normal behavior.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
In modern front-end websites, first think you see in header region is an large input text with a search icon.
No need to say it is a search form.
We still tell it in 'title' attribut for accessibility.
This patch removes 'Search' text.
If 'my library first' feature is enabled, shows a text in title of a
question mark icon.
In submit button, replaces 'Go' with a seach icon and add title
'Search'.
Test plan :
1)
1.1) Set system preferences :
OpacAddMastheadLibraryPulldown to 'Add'
SearchMyLibraryFirst to 'Don't limit'
1.2) Go to OPAC main page
1.3) You don't see 'Search' anymore
1.4) You see in submit button an icon
1.5) Move mouse over submit button to see tooltip text 'Search'
2)
2.1) Set system preferences :
OpacAddMastheadLibraryPulldown to 'Don't add'
SearchMyLibraryFirst to 'Limit'
2.2) Go to OPAC main page
2.3) Log in
2.4) You don't see text 'Search (in <library name>) only'
2.5) You see a question mark icon
2.6) Move mouse over submit button to see tooltip text 'Search (in <library name>) only'
Signed-off-by: Samu Heiskanen <samu.heiskanen@hypernova.fi>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If a staff member has access to the staff client (either because
'catalogue' permission is enabled or they're a superlibrarian
then that user can add items (from OPAC or staff client) to a list
marked 'Staff only'
Test plan:
1. In the staff client go to: Lists > 'New list'. Notice under 'Allow changes to contents
from' there are three options: Nobody, Owner only, Anyone seeing this
list
2. Apply first 3 patches and run updatedatabase.pl
cd installer/data/mysql
sudo koha-shell <instance>
./updatedatabase.pl
3. Restart memcached and plack
4. Create 4 patron accounts:
- User A : Superlibrarian permissions
- User B : 'Staff access, allows viewing of catalogue in staff interface
(catalogue)'
- User C : No permissions
- User D : 'Staff access, allows viewing of catalogue in staff
interface' and 'Lists' > Edit public lists (edit_public_lists)' sub-permission
5. Login to staff client as User A.
Create a public list and select the new 'Staff only' option under 'Allow changes to contents from'
6. Log into the staff client as User B.
Confirm you can add items to the list from the following staff client pages:
- Individual list page using the 'Add items' button
- Staff client search result page
- Staff client biblio detail page
7. Confirm you can remove items from the list
8. Confirm you can perform an OPAC search when not logged in
9. Log into the OPAC as User B. Confirm you can add items to the list
from the following OPAC pages:
- OPAC search result page
- OPAC biblio detail page
10. Log into the OPAC as User C. Do an OPAC search and confirm you
can view the list, but not add items to it
11. Login to the staff client as User B. Create a new list with the
following settings:
- 'Category'='Private',
- 'Allow changes to contents from'='Staff only'
Notice a red hint message is displayed.
Change 'Category'='Public' and notice the hint is removed
12. Log into the OPAC as User C. Notice the 'Staff only' option is not
available when creating a list
13. Log into the OPAC as User B. Repeat step 11. Confirm the same
outcome
14. Log into the staff client as User A. Create a list with the
following settings:
- Public = 'Public'
- Allow changes to contents from = 'owner only'
15. Log into the staff client as User D. Edit the list from step 14
confirm you can edit the list to have 'Allow changes to contents from' =
'Staff only'
16. Run Patron.t and Virtualshelves.t unit tests:
sudo koha-shell <instance>
prove t/db_dependent/Koha/Patron.t
prove t/db_dependent/Virtualshelves.t
Sponsored-by: Horowhenua District Council, New Zealand
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a new system preference, OpacAdvancedSearchTypes, as an
OPAC-specific version of the AdvancedSearchTypes preference. Values from
AdvancedSearchTypes are copied to OpacAdvancedSearchTypes so that
behavior is consistent.
The patch also alters the output of the "Most popular" page so that:
1. The page heading is correct ("Most popular titles" instead of "Top
issues").
2. The table show both item type and collection whether or not the user
has submitted query with one of those fields as a filter.
To test, apply the patch and run the database update process.
- Go to Administration -> System preferences.
- Search for AdvancedSearchTypes. You should get two results, one for
the OPAC preference and one for the staff interface.
- Check that the OpacAdvancedSearchTypes settings match the
AdvancedSearchTypes settings.
- View the advanced search pages in the staff interface and OPAC to
confirm that the tabs look correct.
- Change the OpacAdvancedSearchTypes and AdvancedSearchTypes settings to
be different and confirm that each is applied separately to each
interface.
- Enable the OpacTopissue system preference.
- View the "Most popular" page in the OPAC.
- The page heading should be correct.
- The OpacAdvancedSearchTypes settings should be reflected in the
"Refine your search" sidebar: If "Collection" is checked, a filter
for collection should appear. If "Item types" is checked, a filter
for item types should appear.
- The output of your search should include collection and item type
regardless of what filters you've submitted.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Some discovery tools can't translate ISL-DI results, it would be useful
if we can get ISL-DI output already translate.
This patch add an optional parameter language to GetAvailability, and
make GetAvailability results translatable.
If no parameter is given the output language is the language of the
cookies is present or the first language in the opac language list.
Test plan:
1. Enable the ILS-DI system preference
2. Locate a record
3. Test these URLs:
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[BIBLIONUMBER]&id_type=biblio
and
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[ITEMNUMBER]&id_type=item
(Where the [OPACBASEURL] is the OPAC URL of your test instance,
[BIBLIONUMBER] and [ITEMNUMBER] are a record number and item number of
your choice.)
4. Apply the patch
5. Test these URLs:
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[BIBLIONUMBER]&id_type=biblio&language=[LANGUAGE]
and
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[ITEMNUMBER]&id_type=item&language=[LANGUAGE]
(Where the [OPACBASEURL] is the OPAC URL of your test instance,
[BIBLIONUMBER] and [ITEMNUMBER] are a record number and item number of
your choice, [LANGUAGE] is a language code ex: 'en' or 'fr-FR')
6. The results should now be in the requested langugage
Sponsored-by: University Lyon 3
Signed-off-by: Sonia <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
System preferences:
displayFacetCount - Show;
1. Let's search
2. Near to each of the facets, we see the number of results (n)
3. Click on any of the facets and filter the result
4. Opposite the selected facets, the number of results is not displayed
Ex.
Marriage Fiction [x]
Apply the patch
1. Let's search
2. Near to each of the facets, we see the number of results (n)
3. Click on any of the facets and filter the result
4. Now, opposite the selected facets, the number of results is displayed
Ex.
Marriage Fiction (2) [x]
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Apply patch
2. Go the purchase suggestion page and see that branchcode defaults to the first option in the list.
3. Go to OPACSuggestionMandatoryFields and mark branchcode as required
4. BAck on the OPAC suggestion page notice that the branchcode defaults to an empty value
5. Try to submit the form without changing it, you cannot. You must choose a branch
Signed-off-by: shiyao <shiyao@inlibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
There are 2 prefs that control the default view of biblio detail pages:
IntranetBiblioDefaultView for staff and BiblioDefaultView for OPAC.
There are as well viewISBD, viewLabeledMARC and viewMARC to allow/don't
allow access to those page for staff members.
This code need to be in a single place to avoid discrepancy.
Test plan:
Play with BiblioDefaultView and IntranetBiblioDefaultView and confirm
that the links of biblio point to the correct view.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
