To test:
1. Go to Item types administration.
2. Set some items types to be limited to a branch you are not logged in as.
3. Find some items from the branch you are logged in at and go to Batch item modification.
4. Add the barcodes and attempt to edit the item type to the one you limited in step 2.
5. You can change these item types to ones that your branch should not be able to.
6. Apply patch
7. Try steps 4 -5 again but this time you should not see item types in the dropdown that are limited to other branches.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
not only the first one
Signed-off-by: Philip Orr <philip.orr@lmscloud.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the ability to set patron attributes marked as
repeatable in the batch patron modification tool.
Prior to this patch they were ignored.
Test plan:
You should try with several combinaisons and set patron attributes using
the batch patron modification tool.
Make sure there is no data lose and that the result is what you expect
Please detail in a comment what you tested.
Signed-off-by: Philip Orr <philip.orr@lmscloud.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When using the inventory tool with an uploaded barcode file
and checking the "Compare barcodes list to results",
"Check barcodes list for items shelved out of order" and
"Export to CSV file" checkboxes, the resulting CSV file showed
a blank in the "problem" column for items with out of order
callnumbers. With this patch, you'll see "Shelved out of order".
To test:
* Create 3 items with callnumbers and barcodes a, b, and c
* Go to Cataloguing > Inventory
* Enter a c b (each on its own line) into the barcode field
* Check "Compare barcodes list to results"
* Check "Check barcodes list for items shelved out of order"
* Check "Export to CSV file" (at the bottom)
* Verify the file has empty lines in the problem column
* Apply patch
* Repeat test, the empty lines should now read: "Shelved out of order"
Note: Also fixes "problem" to "Problem" to make capitalization
consistent. All those strings are currently not translatable,
this will be filed separately.
Co-authored-by: Mark Alexander <marka@pobox.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. git grep paramater
2. notice 3 files have spelling mistakes
3. apply the patch
4. git grep paramater
5. notice there are no spelling mistakes for that word
Signed-off-by: Thomas Klausner <domm@plix.at>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a missed parameter (profile_id) in stage-marc-import.pl and also adds a missing import in the background job for staging marc files. This means that the profile used when importing can now be shown in the import batches table and also in batch details
Test plan:
1) Stage a record for import and make sure to save the import profile you use
2) Import a record using that profile
3) Navigate to Cataloging > Manage staged MARC records
4) In the Profile column, no value will be shown for the staged record
5) Click on the batch, the profile will be missing in this screen as well
6) Apply patch
7) Restart_all
8) Repeat steps 2-5, the profile name should be visible in both places
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Emmanuel Bétemps <e.betemps@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This change adds a CSRF token to the Content Management pages
at additional-contents.pl.
Test plan:
0. Apply patch
1. koha-plack --restart kohadev
2. Try to add "News", "HTML customizations", and "Pages".
3. Try to delete these new content entries
4. Note that you were successful in your endeavours
JD amended patch: remove empty line removal (no need to create
unecessary conflicts)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When editing an existing holiday and checking the
"copy to all libraires" checkbox, the other calendars won't
get updates. Allow this by first checking if holiday exists
in target calendar and if not, add it.
To test:
1. Add unique holiday to branch A.
2. Don't check checkbox "Copy to all libraries".
3. Save.
4. Verify the holidays shows on all calendars as
a green box.
5. Edit the holiday, now check "Copy to all libraries"
and save.
=> Verify nothing has changed in other calendars:
only the green box, no holiday in list on the right
6. Edit again, make a change to description,
check checkbox, save.
=> Verify it's still not showing in the other
calendars.
9. Apply this patch.
10. Edit holiday again, check "Copy to all libraries"
and save.
=> Verify holiday is now added to other calendars.
11. Edit again, this time do not copy and save.
=> Verify holiday was edited just in branch A.
12. Again edit, check and save.
=> Verify holiday was edited in all libraries.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch changes the inventory tool so that it only populates the
authorized value descriptions for items that show up in the results.
That is, items that will be viewed by a human.
This change saves a lot of time by not performing unnecessary
database lookups.
Test plan:
0. Apply patch and koha-plack --restart kohadev
1. Go to create a SQL report from SQL
/cgi-bin/koha/reports/guided_reports.pl?phase=Create%20report%20from%20SQL
2. Save a report with the following SQL:
SELECT barcode FROM items where barcode <> '';
3. Run the report
4. Download as CSV
5. Edit the CSV and remove the "barcode" heading
6. Go to edit item for barcode 3999900000001
/cgi-bin/koha/cataloguing/additem.pl?op=edititem&biblionumber=1&itemnumber=1
7. Add "Damaged status" of "Damaged"
8. Click "Save changes"
9. koha-mysql kohadev
10. update items set notforloan = 9 where barcode = 3999900000001;
11. Go to inventory tool
http://localhost:8081/cgi-bin/koha/tools/inventory.pl
12. Upload barcode file via "Choose file"
13. Uncheck "Compare barcodes list to results"
14. Open F12 tools
15. Click "Submit"
16. Click "OK" on confirm box
17. Note that the inventory job takes around 30 seconds to run
instead of 60 seconds
17b. The exact figures may vary. If you compare with before patch
inventory runs, you'll be saving roughly 18 seconds.
18. Note that "Damaged" appears in the "Damaged" column, which
demonstrates that the authorized value lookup was completed for
the item in the result list
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Finally! No more occurrences of this module, we can happily remove it!
Test plan:
git grep is your friend
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If you log into the OPAC as a user with no flags, you can see a restricted view of
/cgi-bin/koha/tools/tools-home.pl instead of seeing the login screen.
Test plan:
Use a patron with catalogue permission only
Login and access the tools home page
=> redirected to the login screen
Add a club sub permission
Login and access the tools home page
=> You see the tools home page with the clubs link
Add a tool sub permission, remove club
Login and access the tools home page
=> You see the tools home page with the relevant link
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Test plan:
1. Enable system preference ExportCircHistory
2. Create an item bundle (see bug 28854 comment 458)
3. Check out the item bundle
4. In the checkouts table, check the box in column "Export",
choose export format 'MARC with items', check "Export items bundle
contents" and click on "Export" button
The exported file should contain the biblio and item created at step
2, but also the biblio and items that are part of the bundle
Signed-off-by: Marie-Luce <marie-luce.laflamme@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marie-Luce <marie-luce.laflamme@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
https://bugs.koha-community.org/show_bug.cgi?id=25508
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
TO test:
1 - Cataloging -> Export catalog data
2 - Export a record fom your catalog
3 - Cataloging -> Stage record for import
4 - Import the record, use Record matchign rule: KohaBiblio (999c)
5 - Stage, view batch
6 - Record should match the one that was exported
7 - When replacing record use this framework, choose a different value than current framework of record
8 - Import this batch
9 - View and edit record - note framework did not change
10 - Apply patch
11 - Restart all
12 - Repeat 4-8
13 - View and edit record, confirm framework has changed
14 - Sign off
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some old-style code is making our tests fail when run in Debian Testing.
This patch addresses this.
To test:
1. Launch bookworm KTD:
$ KOHA_IMAGE=master-bookworm ktd up -d
2. Run:
$ ktd --shell
k$ prove t/00-testcritic.t
=> FAIL: It fails!
3. Apply the patch
4. Repeat 2
=> SUCCESS: Tests now pass!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
'At the moment, it isn't possible to delete any rotas that have 0 items linked to it. The only way to do it is in MySQL - it would be good if this was possible from the staff client.'
This patch implements this, and also implements the possibility of deleting a rota with items linked to it, providing a warning that the item(s) currently in rotation will remain at its/their current stage library.
Test plan:
1) Enable StockRotation system preference
2) Cataloging > Stock rotation > New rota
3) Enter Name, save
4) Verify 'Delete' button shows on the right
5) Click 'Delete' -> Confirm 'Yes'
6) Repeat steps 1-3 and click 'Manage'->'Stages'
7) Add a new stage, enter Library and Duration, click 'Save'
8) Return to rotas, click 'Manage'->'Items'
9) Add item, enter barcode, click 'Save' (optional: add more than 1 item)
10) Optional: Click 'Move to next stage' and verify that item is now in different branch
11) Click 'return to rotas' and press 'Delete'
12) Verify the warning now shows, because items are attached, with the attached items count
13) Click 'Delete' -> Deletion is successful
14) If you did step 10, verify the item is still in the branch that it was at the time the rota was deleted
Sponsored-by: PTFS-Europe
Signed-off-by: David Nind <david@davidnind.com>
JD Amended patch:
* Fix QA failures
FAIL forbidden patterns
forbidden pattern: tab char (line 150)
forbidden pattern: tab char (line 151)
* Adjust commit message to describe what the patch does
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Ther are options that allow avoiding marking an issue returned when se tot lost.
Libraries do this to tie a lost item to a patron clearly.
Eventually, after the patron has paid, or after some time, the library may wish
to delete the item. When doing so, they do not wish to check the item in and affect any statuses
or fines. This is also true for withdrawn items
It would be helpful to have a way to mark issues returned in bulk, when they have not been marked
returned in the past
To test:
1 - Apply patches
2 - Restart all
3 - Set 'MarkLostItemsAsReturned' system preferences to 'None'
4 - Check out some items that have replacement fees set
5 - Mark them lost
6 - Check out more items, mark them withdrawn
7 - Set system preference 'BlockReturnOfWithdrawnItems' to block
8 - Enter item barcodes into batch modification
9 - Leave 'Mark items returned as blank
10 - Verify nothing was checked in
11 - Repeat but set 'Mark items as returned' to 'No'
12 - Verify nothing was checked in
13 - Repeat, but set 'Mark items as returned' to 'Yes'
14 - Verify items are returned
15 - Verify no fines have been adjusted
16 - Verify withdrawn items are sitll withdrawn
17 - Verify you can now delete the items
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This param in the dropdown is meant to signify no change, distinct from
"" when means to set to default. In rebasing this condition was lost, this patch
restores undef of the variable to avoid setting framework to an invalid value
To test:
1 - Stage a record with a match (export and import a record)
2 - Attempt to import and overlay with option 'When replacing records use this framework:' 'Keep original framework'
3 - It fails, logs note 'value too long for field frameworkcode'
4 - Apply this patch
5 - Try again, it succeeds - framework is not changed
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows for selection of framework to use when overlaying
records - by default it is set to keep the initial framework
To test:
1 - Create some records using one framework
2 - Export the records
3 - Edit the records to add fields not in original framework
4 - Stage records using a rule that will find matches
5 - Import
6 - Note records contain new fields on display, but they are lost on edit
7 - Apply patch
8 - Stage records again
9 - Select a framework that contains the new fields on import
10 - Import records
11 - Note records now use selected framework and are displayed/edited
correctly
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Bob Bennhoff - CLiC <bbennhoff@clicweb.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If a user only has the clubs and no permission from the tools section,
they can't access the patron clubs page by navigation. This patch
extends the permission checks for tools to include the clubs, that
live on the tools page, but have a top level permission.
To test:
- create a patron with only the catalogue and clubs permissions
- log in to the staff client as that patron
- navigate to a patron record, confirm you can see the Clubs tab in the patron account, can add patrons to and remove patrons from clubs
- confirm you don't have a link to the Tools module either on the Koha homepage or in the More menu
- enter the clubs URL manually (/cgi-bin/koha/clubs/clubs.pl), confirm you are allowed to open the page
- Apply patch
- The only changes should be:
- You can now see the Tools entry in the More navigation menu
- You can now see the Tools module link on the start page
- Both take you to the tools page, only visible tools is 'Patron clubs'
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes GetDebarments from the modborrowers tool controller
and replaces it with $patron->restrictions as appropriate.
Test plan
1. Confirm that the 'Batch patron modification' tool pages still load
and perform as expected.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When creating a notice template the user has the option to add the borrower's
password to the template. This should be removed as the password should not be
an option to be added to a notice.
Test plan:
1) Navigate to Tools > Notices and slips
2) Either create a new notice or edit an existing notice
3) Observe that in the list of fields available to insert into the message body,
there is the option for "borrowers.password"
4) Apply patch
5) Navigate to the same menu
6) Observe that the "borrowers.password" option is now no longer visible
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We lost the display of the "Add staged files to basket" link when create
a new order from a new file
Test plan:
Add order to basket from a new file, select a file and import
See the detail of the job and notice the "Add staged files to basket",
click and confirm that it works as expected.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some libraries need to recalculate a patron's expiration date any time they are updated via a patron import from file.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Koha/Patrons/Import.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a check on the existence of the object and passes this to the template
I also drop a level of IF by moving to ELSIF
To test:
1 - Enable ReturnLog amd IssueLog
2 - Checkout an item to a patron
3 - Return it
4 - View 'Modification log' tab of the borrwer
5 - Note item links, test them, they work
6 - Delete the item
7 - Reload and try links again, they do not work
8 - Apply patch
9 - Reload, no more links
10 - Checkout and return another item
11 - This one has links, and they work as before
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This modules is really not needed.
The wide character test does not make much sense. Just use
encoding as you should.
Test plan:
Run xt/author/Text_CSV_Various.t.
Check about page, perl modules.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch reduces the repetition in the tools/letter.pl controller
replaceing it with a try/catch block wrapping a call to
C4::Letters::_process_tt instead.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is a follow-up to bug 31211. It adds the same INCLUDE_PATH
variables as C4::Templates adds during processing to prevent false
failures.
Test plan
1) Add an INCLUDE to any valid notice, for example:
[% INCLUDE 'patron-title.inc' patron => patron %]
2) Save and continue
3) Confirm you are faced with a validation error complaining that
the include file cannot be found
4) Apply this patch
5) Confirm that the reported error has dissapeared
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The change in batchMod.pl is not needed when we fix the builder.
But we could at least add a comment there!
Note that passing the biblionumber of the first item does not
make sense since we are modifying items from several biblio
records normally. We most probably do not want this MARC
record's itemcallnumber (via the syspref) in all our items.
Test plan:
Test batchMod with and without the Populate fields checkbox.
Fill syspref 'itemcallnumber' with e.g. 084a.
Check Populate, and try again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When one tries to batch mod items and has "Use default values"
checkbox checked on and they have value in syspref "itemcallnumber",
Koha dies on error 500. In logs it reads:
Can't call method "field" on an undefined value at
.../Koha/Koha/UI/Form/Builder/Item.pm line 164.
This happens because in batchMod.pl line 269 we don't pass
biblionumber as parameter to Koha::UI::Form::Builder::Item->new
and thus Koha fails to fetch biblios marc record.
To test:
1. Confirm you have/set value to syspref "itemcallnumber" e.g. 084a
2. Find some item(s) to modify
3. Provide barcodes of those item(s) and check checkbox "Use default values"
4. Hit "Continue"
=> error 500 is raised
5. Apply patch.
6. Repeat steps 3. and 4.
=> no error is raised
Sponsored-by: Koha-Suomi Oy
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There was a typo in bug 29697 which lead to a code reference error.
Test plan
1) Export a record with ISBN from your catalog (Save as MARC)
2) Stage it using the ISBN matching rule (make sure it matched)
3) Manage staged import and click on the Diff link
Prior to this patch an error would be thrown, after the patch you should
now get the diff view as expected again.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows multiple item types to be chosen when exporting
bib records from the Tools module.
Test plan:
0. Apply patch and koha-plack --restart kohadev
1. Go to http://localhost:8081/cgi-bin/koha/tools/export.pl
2. Select "All" for "Item type" and note 435 bibs are exported
3. Select "Books" and note 360 bibs are exported
4. Select "Books" and "Visual Materials" and note 380 bibs are exported
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
System preference 'CSVdelimiter' has a special case for tabulation.
Preference value contains string 'tabulation' but string '\t' must be used in CSV file.
This is OK in many places, for exemple Bug 17590.
This patch adds C4::Context->csv_delimiter to add a uniq metod dealing
with this behavior.
Also create Koha::Template::Plugin::Koha->CSVDelimiter for calls from
Toolkit Templates.
Test plan :
1) Set system preference 'CSVdelimiter' = 'tabs'.
2) Create CSV export in impacted pages
3) Check columns are separated by tabulation character and not string 'tabulation'
4) Check with another delimiter
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Try at staff side: tools/page.pl?code=CODE
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The idea rely on the KohaDates TT plugin for the date formatting. We
should not have any output_pref calls in pl or pm (there are some
exceptions, for ILSDI for instance).
Also flatpickr will deal with the places where dates are inputed. We
will pass the raw SQL value (what we call 'iso' in Koha::DateUtils), and
the controller will receive the same value, no need to additional
conversion.
Note that DBIC has the capability to auto-deflate DateTime objects,
which makes things way easier. We can either pass the value we receive
from the controller, or pass a DT object to our methods.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the now unused: _update_import_record_marc
Additionally, as items are already present in import biblio we no longer need to embed
them, so that parameter is removed and the option removed from the sub and pod and everywhere
it was used
In all cases, we were embedding, so we don't need a way to get without
Tests updated
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The object search is currently:
Koha::Items->search({ barcode => \@contentlist }
Which generate code like:
barcode = 1 OR barcode = 2 OR barcode = 3 ....
This can get quite large
We can reduce the query size by using -in:
Koha::Items->search({ barcode => { -in => \@contentlist } }
Which generates code like:
barcode in ( 1, 2, 3 )
To test:
1 - Apply patch
2 - Perform batch modifications
3 - Confirm nothing has changed
Signed-off-by: Rachael Laritz <rachael.laritz@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Save a new record with only a title in the non-default tab (english).
Check if you see it on the list. Edit.
Save a new record without title but only content in non-default lang.
Check if you see it.
Do the same 2 edits on the default tab only. Verify too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Take note of what your logged in library is
2. Add a new page that can be viewed on the OPAC and staff interface.
Limit the library to a different library, not your logged in library
3. Use a News item to create a hyperlink to your new page on the OPAC
and staff interface.
4. Confirm that a page error shows if you try to view the new page.
5. Edit the new page and set the library to All libraries.
6. Try to go to the new page again and confirm it shows.
7. Log out and log back into the staff interface as a staff user that
isn't a superlibrarian
8. Confirm you can view the new page as this user
Sponsored-by: Horowhenua Libraries Trust
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This page utilises the Additional Contents feature to add custom pages
to the staff client and the OPAC in the user's desired language.
To test:
1. Apply patch and restart services
2. In the staff client, go to Tools, then go to the new 'Pages' page
3. Add a new page to display on both the staff client and OPAC.
4. Confirm the URLs in the Page URL column work as expected.
5. Confirm that any pages made for the staff client only do not show in
the OPAC, and that any pages made for the OPAC only do not show in the
staff client.
6. Confirm that pages do not show on the OPAC main page where news items
show. Confirm news items show on the OPAC main page as expected.
Sponsored-by: Chartered Accountants Australia and New Zealand
Signed-off-by: Thibault Kero <thibault.keromnes@univ-paris8.fr>
Signed-off-by: Lisette Scheer <lisettePalouse+Koha@gmail.com>
Signed-off-by: Lisette Scheer <lisettePalouse+Koha@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It would be useful for Koha to run a basic TT validation test and report back errors.
That way if somebody misses an END tag or something of that nature, it will be easy to find and fix.
Test Plan:
1) Apply this patch
2) Edit a notice, change the content to simply "[% END %]"
or some other invalid Template Toolkit
3) Choose "Save and continue editing"
4) Note the new "Template Toolkit error" field that displays the error
message
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Includes:
Bug 29697: (follow-up) Use flag embed_items
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
JD Amended patch:
-# FIXME Special case here
- print "Biblio not found\n,";
+ print "Biblio not found\n";
- my $biblio = Koha::Biblio->find($hostbiblionumber);
+ my $biblio = Koha::Biblios->find($hostbiblionumber);
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Uninitialized value warning on /tools/export.pl when $record_type is undef
Use of uninitialized value $record_type in string eq
at /home/vagrant/kohaclone/tools/export.pl line 43.
This warning in koha-testing-docker appears in:
/var/log/koha/kohadev/intranet-error.log
This patch fixes it by working when $record_type is Undef.
The functionality still remains the same but warning doesn't flood
error log.
To reproduce:
1. Go to export data tool page (/tools/export.pl).
2. Check the error log and find the upper mentioned warning,
check the timestamp to ensure that it was added when you loaded the page.
3. Apply the patch.
4. Load the page again, ensure that the same warning doesn't get added
to the log file again.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
