When the Upload tool is accessed on a smaller (mobile) screen (less than
768 pixels wide), the Upload and Browse buttons cannot be clicked. This
patch fixes that.
To test:
1) Go to Tools -> Upload
2) Make the screen narrower, either by opening your browser's Inspector
tool and using Responsive Design Mode, or by dragging in the edge of the
window to make it narrower.
3) Notice that when the screen becomes narrower than 768px, the sections
squash together and the padding between them is lost. Try to click on
the Browse and Upload buttons, notice you cannot.
4) Apply patch and refresh the Upload Tool
5) Ensure the screen is narrower than 768px. Confirm there is now
padding between the sections, and the buttons are clickable again.
Sponsored-by: Chartered Accountants Australia and New Zealand
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When showing an authority, there is a link to search biblio records it is used in.
Actually this link uses 'q=an=$auth_id', this is wrong for an URL, and other places use 'idx:value'.
It does not break search with Zebra nor Elasticsearch but it is better to use ':'
Test plan :
Check changed links return same results with and without patch
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch corrects JavaScript in authorities templates so that
clicking "Edit" on the authority detail page will take you to the
authority edit page while keeping the same tab open.
This patch also corrects the JavaScript which should have been
automatically moving the cursor focus to the first form field when
switching tabs in the editor.
This patch also adds the "Section" headings which are present in the
basic cataloging editor but were not added here at the time of the
page's tabs revision.
To test, apply the patch and locate an authority record in your catalog.
- Without changing tabs, choose "Edit record" from the "Edit" dropdown
menu."
- The authorities editor should load and display the "Section 0" tab.
- Return to the authority detail page and select a tab besides tab 0.
- Click back to tab 0. Editing the record at this point should open the
editor to Section 0.
- Return to the authority detail page.
- Click any of the numbered tabs besides tab 0.
- Choose "Edit record" from the "Edit" dropdown menu.
- When the authorities edit page loads the same tab should be
preselected.
- Test that when you switch tabs in the authority editor the cursor
focus is automatically moved to the first visible input.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes javascript moneyFormat function in paycollect.tt consistent
with the one in pay.tt
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
New way of formatting money amount to make it work with FR format
Test plan:
1- Set CurrencyFormat pref to FR
2- Activate Point of sale and cash register features
3- Add cash register
4- Add debit type that 'can be sold' with a price of 10.00
5- Go to point of sale, click on the item to purchase
6- Verify the Amount to be paid shows the wrong amount and can't be fixed on the interface
7- Apply the patch
8- Refresh the page and do step 5 again
9- Notice it now shows the right amount
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a missing </div> to the bibliographic detail
page template in the section for showing component parts.
Some comments are added to clarify the markup structure.
To test you should have a record in your catalog with component
parts. Bug 11175 provides one you can import if necessary:
https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=78023
To see the error, go to the staff interface, locate the record
in question and view the detail page. Under the Components tag,
scroll to the bottom. You will see content from "later" tabs at
the bottom, e.g. "There is no order for this bibliographic record"
or "No images have been uploaded for this bibliograhpic record yet."
Apply the patch and reload the page. The tabs should still look
correct, and now the tab content should be correctly isolated.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch does the same treatment for moremember.tt where the same
summary block is includes. We also correct the tab order to be a little
more consistent too.
We should really move this to an include and refer to it from both
templates instead of this copy/paste code..
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes tab texts display 'Thing (count)' as opossed to the
current mix we have.
To test, check before after the patch how it looks.
You need to:
- Enable ArticleRequests
- Set ClaimReturnedLostValue to 1 (for example)
- Have some clubs set
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch add 2 new system preferences:
- GenerateAuthorityField667
- GenerateAuthorityField670
When Koha creates authority records from biblios, use these preferences instead of the hard-coded "Machine generated authority record." and "Work cat." values.
Test plan:
1. Make sure AutoCreateAuthorities and BiblioAddsAuthorities are enabled in the system preferences
2. Go to Home › Cataloging › Add MARC record and add a new record
3. Fill in the required fields and add a name in the 100$a field. Note the name, and add the new record.
4. run rebuild_zebra.pl -a
5. Go to Home › Authorities and search for the name you entered in 100$a
6. Select details and look at the 667 and 670 fields. They should default to the hard-coded values.
7. Apply patch, run update database
8. Edit the new GenerateAuthorityField667 and GenerateAuthorityField670 system preferences
9. Do 2-6 . Now the 667 and 670 fields should be what you entered in the system preferences.
Thanks for testing
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works well, no errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Currently when show an authority record you can see the count of records linked
with that authority, but when edit that authority record the that detail is
dissapeared.
Applying this patch will have that information also on edit mode of authority.
Test plan:
1) Search for an authority that is already connected with at least one record
2) On detail view of an authority you can check that authority is linked with
x records.
3) Edit that authority and the information about in how many records that
authority is linked is missing.
4) Apply this patch
5) Edit again that authrity and you can find now the count in how many records
is used that authority
Signed-off-by: Marjorie Barry-Vila <marjorie.barry-vila@collecto.ca>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Make some patron reasons for suggestion via Home > Administration > Authorized values > OPAC_SUG
2. Give those reasons a description.
3. Make several suggestions via staff client and/or OPAC and apply some of the reasons you just made
4. Apply patch
5. Go to Home > Acquistions > Suggestions management
6. Give some of the suggestions some different status (PENDING/REJECTED/ACCEPTED/ect)
7. Make sure on each of the tables you can see the column 'Patron reason'
8. Go to Administration > Table settings and attempt to hide the column.
9. Confirm that the column is properly hidden on the Suggestions management page
Signed-off-by: Rhonda Kuiper <rkuiper@roundrocktexas.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
1. Confirm that
installer/data/mysql/atomicupdate/bug_23352-add_ccode_column_to_subscriptions_table.pl
has the exec flag
2. Create a subscription. Notice the 'Collection' dropdown defaults to
the 'None' option - same as Location
3. Save the subscription without changing the 'None' collection
4. Receive the serial and confirm the 'Collection' field is empty
5. Create a second subscription. Change the 'Collection' dropdown to
'Fiction', then save the subscription
6. Receive the serial and confirm the 'Collection' dropdown is set to
'Fiction'
7. Confirm that the 'Collection code' terminology in the template is replaced with
'Collection'
Sponsored-By: Brimbank Library, Australia
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The default collection code set in the subscription will be applied if
item records are created when receiving the serial.
Test plan:
1. Apply 3 patches
2. Run updatedatabase.pl and restart services
3. Create a subscription:
- Tick the 'Create an item record when receiving this serial' radio
button
- Select values in the Location, Collection code and Item type dropdowns
- Save the subscription
4. Confirm the Location, and Collection code default values
you choose in #3 are displaying in the 'Information' tab of page that's
loaded
5. Receive the serial:
- Click 'Receive'
- Change the status dropdown from 'Expected' to 'Arrived'
- Confirm the 'Collection Code', 'Shelving location' and 'Koha item
type' dropdowns are pre-filled with the values you defined in #3
6. Run unit test t/db_dependent/Serials.t
Sponsored-By: Brimbank Library, Australia
Signed-off-by: Samu Heiskanen <samu.heiskanen@hypernova.fi>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes a number of changes to the vendor search/view template
in order to make it work better in different contexts:
- Add a vendor-specific toolbar under each vendor search result. This
gives instant access to the options for a new basket, new contract,
vendor edit, or to receive shipments. A delete button will appear if
available.
- Add a summary of the number of baskets and subscriptions. This helps
the user know if there are closed baskets and whether an outstanding
subscription might be blocking the option to delete. Each number is
linked to the view of those entries.
- Indicate whether a vendor is inactive. The vendor name appears in a
different color when it is inactve and is labeled as such.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- To test you should have multiple vendors in your system, some active
and some inactive. Add some baskets and subscriptions to one or more
if necessary.
- Go to Acquisitions and submit an empty vendor search to show all
vendors.
- Verify that the page looks correct and that all controls work as
expected.
- Open the basket view for a single vendor and compare the two views.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Apply patch
2. Have a bunch of invoices, some open and some closed.
3. Go to Home > Acquisitions > Invoices and do a search that will
return you many of those invoices, some open and some closed.
4. Notice the 'Select all' and 'Clear all' buttons.
5. Try clicking 'Select all' on the Open invoices tab. All Open invoices
should become checked.
6. Try clicking 'Clear all' on the Open invoices tab. All open invoices
should become unchecked.
7. Try 5 - 6 again but on the Closed invoices tab.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch corrects a typo in the <title> tag of the
overdue recalls template:
"Circulaion" corrected to "Circulation."
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
1. Configure the default MARC framework to use those value builders:
- unimarc_field_146a for 146$a
- unimarc_field_146h for 146$h
- unimarc_field_146i for 146$i
2. Verify that they all work correctly according to
https://www.ifla.org/files/assets/uca/unimarc_updates/BIBLIOGRAPHIC/u-b_146.pdf
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When search a patron for placing a hold, if a cardnumber is entered we
should pick the patron and use it, instead of display the table result.
This was a regression caused by bug 30063.
Test plan:
- Place a hold on anything in staff
- Search for 42 or any other existing cardnumber in your database
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1 - Sign in as a superlibrarian
2 - Tools->Batch patron modification
3 - Add patrons with and without pasword expiration set
4 - Confirm dates display correctly on modification page, or show never
5 - Check the box to delete all dates
6 - Confirm patrons now show 'Never'
7 - Edit patrons again, set a date
8 - Confirm date is set correctly
9 - Sign in as a user with catalogue/tools/borrowers permissions, but not superlibrarian
10 - Confirm y9ou do not see, and cannnot edit password expiration dates
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1 - Sign in as a superlibrarian
2 - Find a patron account with no password expiration set
3 - View member detials
4 - note expiration says 'Never'
5 - Edit patron
6 - Set patron expiration
7- Save
8 - View details, confirm password expiration shows correctly
9 - Sign in as non-superlibrarian
10 - Confirm you don't see expirationdate on details page
11 - Edit patron and confirm password expiration does not show
12 - Edit HTML and confirm you epxiration date not saved
<input type="text" name="password_expiration_date" value="2052-05-02">
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a new page opac-reset-password where a user cna enter their login
(userid or carndumber), current password, and new password.
If the user has a password expiration date and the current password is correct and
the new passwords match and meet requirements their password will be updated and the
expiration date reset
A patron whose password does not expire will be reidrected to login to change their password
To test:
1 - Apply patch, updatedatabase, enable new syspref EnableExpiredPasswordReset
2 - Set 'Password expiration' for a patron category
Home->Administration->Patron categories->Edit
3 - Create a new patron in this category with a userid/password set, and an email
4 - Update the patron with an expiration to be expired
UPDATE borrowers SET password_expiration='2022-01-01' WHERE borrowernumber=51;
5 - Give the borrower catalogue permission
6 - Attempt to log in to Straff interface
7 - Confirm you are signed out and notified that password must be reset
8 - Click 'Reset your password' link
9 - You should see the reset password page with fields for: login, current password, new password, conmfirm password
10 - enter invalid/incomplete credentials
11 - Confirm you are notified of invlaid credentials
12 - Fill in all fields, but enter current password as new password
13 - Confirm you are notified of no change
14 - Set minimum password length / strong password requirement for category
15 - Confirm you receive error if new password too short or not secure
16 - Enter a valid new password and submit and confirm update is successful
17 - Confirm you have buttons to go to OPAC or Staff and that both work
18 - Confirm you cna log in (i.e. expiration has been reset)
19 - Expire the users password
20 - Remove catalogue permission
21 - Reset password again and confirm only OPAC link
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds the ability to define password_expiry_days for a patron
category.
When defined a patron's password will expire after X days and they will
be required to reset their password. If OPAC resets are enabled for the
catgeory they may do so on their own, otherwise they will need to
contact the library
To test:
1 - Apply patch, updatedatabase
2 - Set 'Password expiration' for a patron category
Home-> Administration-> Patron categories-> Edit
3 - Create a new patron in this category with a userid/password set,
and an email
4 - Confirm their password_expiration_date field is set
SELECT password_expiration_date FROM borrowers WHERE borrowernumber=51;
5 - Create a new patron, do not set a password
6 - Confirm their password_expiration_date field is NULL
7 - Update the patron with an expiration to be expired
UPDATE borrowers SET password_expiration_date='2022-01-01' WHERE borrowernumber=51;
8 - Give the borrower catalogue permission
9 - Attempt to log in to Straff interface
10 - Confirm you are signed out and notified that password must be
reset
11 - Attempt to sign in to OPAC
12 - Confirm you are signed out and notified password must be reset
13 - Enable password reset for the patron's category and perform a
password reset
Note: you will have to find the link in the message_queue unless
you have emails setup on your test environment
SELECT * FROM message_queue WHERE borrowernumber=51;
14 - Confirm that you can now sign in and password_expiration_date field
is set 10 days in the future
15 - Expire the patron's password again
16 - Change the patron's password via the staff interface
17 - Confirm they can sign in and the expiration is updated
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
1. Apply patch and run updatedatabase
2. Enable 'UseCashRegisters' syspref and create at least one cash
register for your library
3. Verify that you have several authorized values in the 'PAYMENT_TYPE'
category. One of them should be 'CASH'
4. Go to a patron accounting tab, create a manual invoice and go to the
payment form. Select payment type 'CASH' and verify that you cannot
submit the form if no cash register is selected.
Select another payment type and verify that you can submit the form
even if no cash register is selected
5. Set syspref 'RequireCashRegister' to 'always require a cash register'
6. Repeat step 4 but this time you should not be able to submit the form
if no cash register is selected, no matter which payment type is
selected.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
TEST PLAN:
1) Enable shibboleth by adding shibboleth to koha-conf.xml, you can do
this by following
https://wiki.koha-community.org/wiki/Shibboleth_Configuration#Using_AD_FS_Metadata
2) If you are logged in Koha, log out, on the login screen the text
at the top should say the following, "Log in using a Shibboleth
account"
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The holds page in the staff interface has some JavaScript relating to
Bootstrap tabs, but the tabs are not always present on the page. This
leads to a JS error after you have selected the patron for the hold.
This patch adds a check for the tabs container element before executing
the code.
To test, apply the patch and locate a bibliographic record on which to
place a hold.
- On the initial holds screen should see tabs for "Patrons" and "Clubs."
Both should work correctly.
- Select a patron to place the hold for.
- On the page where you enter hold details (pickup library, hold
expiration, etc.) there should be no JavaScript error in the console.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This didn't affect table display, but when there was a biblioloo.warn
we were not closing the first <td> tag
Confirm multi-holds table loads correctly when one (or more) records cannot be held
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When placing holds, staff will set the pickup location at the top,
choose an item, then place the hold.
It is easy not to notice the item specific locations dropdown.
This patch moves it in line with the other selction areas on the request screen.
To test:
1 - Find a record on staff client, place hold
2 - Select a patron to load the request screen
3 - Note the location dropdown for next available hold
4 - Note the item specific locations on the far right
5 - Apply patch
6 - Reload the page
7 - Note the item specific location dropdowns are now moved to the left
8 - Place the hold, verify it works with the dropdowns
9 - Verify title levelholds still work as expected
10 - Verify multi-holds still work
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch converts jQueryUI tabs on three tools templates to Bootstrap
tabs. The patch contains indentation changes, so diff accordingly.
To test, apply the patch and go to Tools -> Export.
- You should see at least two tabs, "Export bibliographic records" and
"Export authority records."
- Confirm that they look correct and work correctly.
Go to Tools -> Batch patron modification.
- Check the "By card number," "By borrowernumber," and "By patron list"
tabs.
Go to Tools -> Overdue notice/status triggers.
- Check the "First," "Second," and "Third" tabs.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The way Bootstrap tabs manipulate the DOM, CodeMirror has problems
initializing correctly, I think because of redraws and CodeMirror's
attemps to position things absolutely.
The solution seems to be to wait until after a Bootstrap tab has
activated before initializing the CodeMirror instance. This patch
implements that, along with a check to prevent double-initializing the
same textarea.
I've also made a similar change to the way TinyMCE is initialized, which
I hope will help with the issue of the editor not always loading
correctly.
To test, apply the patch and go to Tools -> HTML customizations.
- Test creation and editing of HTML customization entries using both
the default editor and the text editor (Edit -> Edit with text
editor).
- Verify that the editor (CodeMirror or TinyMCE) loads correctly and
looks correct, both upon page load and upon switching tabs between
"Default" and other language tabs
- Verify that your edits are saved correctly.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch converts jQueryUI tabs on three tools templates to Bootstrap
tabs.
To test, apply the patch and go to Tools -> HTML customizations.
- Click "New entry."
- On the entry form you should see two tabs, "Default" and "English
(en)"
- The tabs should look correct and work correctly.
Go to Tools -> Batch record deletion.
- Test the three tabs: "Upload a file", "Select a list of records", and
"Enter a list of record numbers."
Go to Tools -> Batch record modification.
- Test the same three tabs on this page.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the suggestions page to use Bootstrap tabs
instead of jQueryUI.
To test you should have multiple suggestions from different libraries,
different item types, and different statuses.
Apply the patch and go to Suggestions.
- Suggestions should initially be displayed in tabs by status.
- Confirm that the tabs look correct and work correctly.
- Test that tabs work correctly for each option in the "Organize by"
dropdown in the left-hand sidebar.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the pending patron updates page to use Bootstrap
collapse instead of jQueryUI.
This patch contains whitespace changes, so view the diff with this in
mind.
To test, apply the patch and rebuild the staff client CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- If necessary, log into the OPAC and submit an update via the "Your
personal details" page. Ideally do this for two or more patrons.
- In the staff client, follow the "Patrons requesting modifications"
link.
- On the "Update patron records" page you should see the headings
representing each of the patrons with pending updates. The first panel
should be expanded.
- Confirm that the panels expand and collapse correctly.
- Follow the "Patron details" link for one of these patrons.
- Click the "Review pending modifications" link on the patron detail
page.
- When the update page opens that patron's panel should be expanded.
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The payment type is already required when using the cash register
feature, but some users want to force selecting a payment type even
when cash registers are not used
The new system preference name is RequirePaymentType
Test plan:
1. Apply patch and run updatedatabase.pl
2. Disable UseCashRegisters and RequirePaymentType sysprefs
3. Create some authorised values in PAYMENT_TYPE category if needed
4. Create a manual invoice and pay it. Notice that the payment type is
optional.
5. Enable RequirePaymentType
6. Create a manual invoice and pay it. Notice that the payment type is
now required.
7. Enable UseCashRegisters and verify that the payment type is always
required, even if RequirePaymentType is disabled
Rebased by Thibaud Guillot <thibaud.guillot@biblibre.com> on 21-12-02
Signed-off-by: shiyao <shiyao@inlibro.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the output_and_exit call to instead pass an error
parameter in the template and use it to display the warning instead of
the rest of the page content in the 'Manage two-factor authentication'
page.
This allows for translation and makes the page adhere to normal
practices.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
Make sure that you have no encryption_key in koha-conf.
Check about page, system information tab.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch removes whitespace in the template around the markup of
report author first name and surname. This prevents unwanted spaces in
the output.
To test, apply the patch and go to Reports -> Use saved.
The display of report author should be like this:
Leonard, Owen (123456)
Instead of Leonard , Owen (20375)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Previously the sorting took 'chosen' into account and would move a selected match to the
top on next load - it is better to preserve the same sorting every time
When loading matches the 'cehcked' variable was not being cleared, so multiple matches were
being marked 'checked="checked"'. Fixing this ensures the correct record displays as chosen
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Ben Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patchset adds the display of all matches found during import to the import management screen
A staff member with the permission to manage batches will be able to select for any individual record which match, or none, should be used during import
To test:
1 - Import a batch of records or export existing records from your catalog
2 - Import the file (again) and select a matching rule that will find matches
3 - Note that you now have radio buttons allowing you to select a record, or none
4 - Test scenarios:
I - When 'Action if matching record found' is 'Ignore'
a - Imported record ignored if match is selected
b - 'Action if no match found' followed if no match is selected (Ignore matches)
II - When 'Action if matching record found' is 'Replace'
a - The chosen record is the one overlayed (you can edit the chosen record before importing to confirm)
b - 'Action if no match found' followed if no match is selected (Ignore matches)
III - When 'Action if matching record found' is 'Add incoming record'
a - Record is added regardless of matches
5 - Confirm 'Diff' 'View' links work as expected
6 - Confirm that after records are imported the radio buttons to choose are disabled
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Bug 22785: API files
Signed-off-by: Ben Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch converts the jQuery tabs on the article requests page to
Bootstrap.
To test you should have the "ArticleRequests" system preference
enabled. If necessary, create some article requests and mark some
"Pending," some "Processing," and leave some new.
- Apply the patch and go to Circulation -> Article requests.
- The page should show three tabs: New, Pending, and Processing.
- The tabs should look correct and work correctly.
- The DataTables under each tab should work correctly.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch modifies three serials templates in order to replace jQueryUI
tabs with Bootstrap tabs.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go to Serials.
- Perform a serials search which will return one or more results.
- On the search results page you should see an Open and Closed tab.
- The tabs should look correct and work correctly.
- Confirm that "Select all" and "Clear all" controls work correctly in
each tab.
- Click one of the search results to view the details for that
subscription.
- You should see tabs for Information, Planning, Issues, and Summary.
You may also see an Acquisition details tab depending on your data.
- In the sidebar menu click "Serial collection."
- On this page you should see tabs corresponding to each year the serial
has been received.
- Under each tab the "Select all" and "Clear all" controls should work
correctly in the context of that tab. Other controls should apply to
all tabs.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
