Pre-filling of items: remember what was in the previous item filled, to be able to create multiple items quickly.
By default, all subfields are prefilled when the PrefillItem syspref is on, unless you specify which fields
you want to prefill in the SubfieldsToUseWhenPrefill syspref.
With a value of "f u v", only the $f, $u and $v will be prefilled, for example.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Rebased and QAed.
Rather than treating ISBN and ISSN as the same, this patch breaks
them out into separate parts of the query, as well as changing
the truncation attribute to enable right truncation (the correct
behavior for the ISBN field in MARC21, and valid behavior in
UNIMARC).
Signed-off-by: Joseph Alway <jbalway@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
In addition to adding a new barcode plugin, this commit begins
refactoring the barcode generation code using a new module,
C4::Barcodes::ValueBuilder. From the POD:
This module is intended as a shim to ease the eventual transition
from having all barcode-related code in the value builder plugin
barcode.pl file to using C4::Barcodes. Since the shift will require
a rather significant amount of refactoring, this module will return
value builder-formatted results, at first by merely running the
code that was formerly in the barcodes.pl value builder, but later
by using C4::Barcodes.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Implement auto-incrementing EAN-13 barcodes
To make this work, C4::Barcodes::next was modified to call process_tail with
new incremented value so that process_tail can generate correct checksum.
Since process_tail is currenlty not used by any barcodes, this change is safe.
C4::Barcodes is used by addbiblio.pl when adding multiple records, while value_builder
is used in all other cases.
Test scenario:
1. prove t/Barcodes_EAN13.t
2. KOHA_CONF=/etc/koha/sites/fer/koha-conf.xml prove t/db_dependent/Barcodes.t
this will check C4::Barcode implementataion
3. in systempreference change autoBarcode to incremental EAN-13 barcode
4. edit two items of any biblio assigning barcodes and verify that numbers
are increasing. Have in mind that last digit is check digit, and it
doesn't increment, but is calculated from barcode itself. Example with
checksum in brackets: 000000086275[2], 000000086276[9], 000000086277[6]
5. Add Item and verify that it gets assigned next barcode
6. Add & Duplicate item and verify barcode increase
7. Add Multiple Copies and verify that barcode increase for each copy
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Solves software error when editing items for record with invalid
analytic.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
A logic bug in the original code adding DefaultClassificationSource
caused the default not to be used (the last used value was used instead)
The bug was fixed in additem by bug 2398 but addbiblio's use
of the code was not fixed.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
$dbh needs our scoping when using "Add item" to prevent error
Can't call method "prepare" on an undefined value at /srv/koha/cataloguing/additem.pl line 88.
Test scenario:
1. start intranet with plack
2. select one Edit items on one record
3. fill in new item and click on "Add item"
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The HTML for authority search results was previously generated in
C4::AuthoritiesMarc::BuildSummary, which meant that it couldn't be
translated. This patch moves the HTML generation into the templates
by introducing a new authorities-search-results.inc include file for
both the OPAC and the Intranet which contains a Template::Toolkit BLOCK
for rendering the authority results. Fixes the authority autocomplete
by removing the untranslatable strings, and returning only data from
the database.
To test:
1. Apply patch.
2. Test authority searching in the authority module in the staff client
3. Test authority searching in the authority control plugin in the
cataloguing module (and the plugin for UNIMARC field 210$c, if you
can figure out how)
4. Test authority searching in the OPAC
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with MARC21 data.
1) Applies cleanly on current HEAD.
2) Authority search in staff
Patch works wonderfully, only some small notes found while testing that have
not been changed by this patch:
ENH note: Search terms show up nowhere. So if I want to change the sorting, I have to
repeat typing in my search term. Even if the form does not keep the term, it
should be visible somewhere on the screen what I searched for.
ENH note: The pagination on top and at the bottom of the result list are formatted
differently. Maybe some missing CSS?
ENH note: Also the authority type is not shown at all in the result list.
3) Cataloguing and authority plugins
The autocomplete function works nicely.
ENH note: There is only one small enhancement
I could imagine. If I start my search from 100 it will limit the search to
'persons' but the autocomplete will also suggest other authorities. It would
be a bit cleaner, if the autocomplete could limit by the appropriate authority
type too. Very nice feature.
Plugins overall work nicely. Created links include the authority numbers and work
correctly.
4) Authority search in OPAC
Works nicely. Display is consistent, but translatability greatly improved.
ENH note: In staff we use 'Details' in OPAC we use 'View full heading' - I wonder
if maybe 'details' would be better understandable for users?
Note: Code reveals a system preference 'AuthDisplayHierarchy' that is
not available in the system preference editor. I talked to Jared and he
will work on this feature later on. For now it's no regression, as the
preference has never been visible.
When a new marc record is added, the language code in field 008 Range 35-37 defaults to Englih ("eng"). This makes cataloguing inefficient and error-prone for librarians if most of the bibliographic data is e.g. in German or in French.
Test:
- Apply patch
- Edit preference DefaultLanguageField008, fill in e.g. 'ger'
- Go to Cataloguing, Add marc Record
- Click in field 008. Language code should read 'ger' (instead of 'eng')
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
This patch modifies the permissions required to access the cataloging
home page (addbooks.pl) so that the user requires edit_catalogue,
edit_items, or fast_cataloging permission.
Users with only edit_catalogue permission will only see biblio edit
links. Users with edit_items permission will only see item edit
links. Users with fast_cataloging permission will only be able to
view information about contents of the catalog--useless for them
but I'm not sure how better to handle it.
To test, log in as a user with each of the above permissions
enabled separately and in combination and test access.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
If AcqCreateItem=ordering, when you receive an order, you now have a
list of all created items and checkboxes that permit you to choose which
items you want to receive.
A 'Edit' link open additem.pl page in a popup to allow you edit the
items before receiving them (popup is automatically closed after
modification, and items table is automatically updated)
If quantity is set manually in the text box, the appropriate number of
checkbox are checked from top to bottom and a warning shows up if
quantity is greater than order quantity
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Simple fix, a special case was added for the fast add framework
in the case that an item was being checked out that had not been
catalogued. In that case, the barcode was being passed as a parameter
through addbiblio.pl to additem.pl.
This barcode param was used to overwrite the existing value, so if
no barcode param was passed ( which is only the case with fast adds
from the circ screen ), the barcode field would appear empty in the
items editor.
This commit causes that special case code to check for an existing
barcode value first, and only use the cgi parameter 'branch' in the
case that there is no existing barcode value.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Editing barcode of fast added item now works. Passes t xt
Recommend this for 3.6 release.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
1/ It now works with neworderempty.pl
2/ The set_to_today function was moved from
additem.tt to dateaccessioned.pl (so it's
available to all pages using the plugin)
Signed-off-by: Julien Sicot <julien.sicot@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
1) Removes unused subroutine get_host_control_num
2) Fixes small mistake, correct subfield for ISBN 020 is z
3) Checks system preference for correct marcflavour instead of
assuming MARC21
4) Fixes MARC21 to not use author(), because it would also add
fields like $w and $0 to 773$a
5) Fixes MARC21 to not use title(), but 245$a, because it would
also add too many subfields.
6) Adds definitions for UNIMARC and includes NORMARC
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Works properly with all supported MARC flavours.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Simplifies the adding of analytical records and ensures that
the data populating the 773 tag is correct. From the host record
add child record is selected and create bib is entered to generate
a new record with host item tag populated from the parent
Caveat: currently prepare_host_field only returns a field for
MARC21. Values for UNIMARC and NORMARC can easily be added but
should be done by someone familar with those formats
and conventions
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
To test:
- create a new record
--> if you enter a value in 001 anaytics will use that in $w for linking later
--> if you set 000/LDR 19 - Multipart resource record level to 'a' there will
be a link from the parent record to the child record later
- save your record and go to the staff detail page
- in toolbar select 'New' > 'New child record'
- check field 773, 245 and 001 from the parent record should have been copied there
- check links between child and parent in staff
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed conflicts in all 3 files.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Works properly for MARC21, and follow-up adds support for NORMARC and UNIMARC.
While typing an authority, will automatically propose authorities (similar to
autocompletion for patron search if activated)
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Tested searching for authorities with and without autocomplete. Note that
this is most useful when used in the "Main entry" box instead of the
"Main entry ($a only)" box.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Corrected tabs to spaces in auth-finder-search.inc while resolving merge
conflict.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Squashed patch incorporating all previous patches (there is no functional
change compared to the previous version of this patch, this patch merely
squashes the original patch and follow-up, and rebases on latest master).
=== TL;DR VERSION ===
*** Installation ***
1. Run installer/data/mysql/atomicupdate/bug_7284_authority_linking_pt1
and installer/data/mysql/atomicupdate/bug_7284_authority_linking_pt2
2. Make sure you copy the following files from kohaclone to koha-dev:
etc/zeradb/authorities/etc/bib1.att,
etc/zebradb/marc_defs/marc21/authorities/authority-koha-indexdefs.xml,
etc/zebradb/marc_defs/marc21/authorities/authority-zebra-indexdefs.xsl,
etc/zebradb/marc_defs/marc21/authorities/koha-indexdefs-to-zebra.xsl, and
etc/zebradb/marc_defs/unimarc/authorities/record.abs
3. Run misc/migration_tools/rebuild_zebra.pl -a -r
*** New sysprefs ***
* AutoCreateAuthorities
* CatalogModuleRelink
* LinkerModule
* LinkerOptions
* LinkerRelink
* LinkerKeepStale
*** Important notes ***
You must have rebuild_zebra processing the zebraqueue for bibs when testing this
patch.
=== DESCRIPTION ===
*** Cataloging module ***
* Added an additional box to the authority finder plugin for "Heading match,"
which consults not just the main entry but also See-from and See-also-from
headings.
* With this patch, the automatic authority linking will actually work properly
in the cataloging module. As Owen pointed out while testing the patch,
though, longtime users of Koha will not be expecting that. In keeping with
the principles of least surprise and maximum configurability, a new syspref,
CatalogModuleRelink makes it possible to disable authority relinking in the
cataloging module only (i.e. leaving it enabled for future runs of
link_bibs_to_authorities.pl). Note that though the default behavior matches
the current behavior of Koha, it does not match the intended behavior.
Libraries that want the intended behavior rather than the current behavior
will need to adjust the CatalogModuleRelink syspref.
*** misc/link_bibs_to_authorities.pl ***
Added the following options to the misc/link_bibs_to_authorities.pl script:
--auth-limit Only process those headings that match the authorities
matching the user-specified WHERE clause.
--bib-limit Only process those bib records that match the
user-specified WHERE clause.
--commit Commit the results to the database after every N records
are processed.
--link-report Display a report of all the headings that were processed.
Converted misc/link_bibs_to_authorities.pl to use POD.
Added a detailed report of headings that linked, did not link, and linked
in a "fuzzy" fashion (the exact semantics of fuzzy are up to the individual
linker modules) during the run.
*** C4::Linker ***
Implemented new C4::Linker functionality to make it possible to easily add
custom authority linker algorithms. Currently available linker options are:
* Default: retains the current behavior of only creating links when there is
an exact match to one and only one authority record; if the 'broader_headings'
option is enabled, it will try to link to headings to authority records for
broader headings by removing subfields from the end of the heading (NOTE:
test the results before enabling broader_headings in a production system
because its usefulness is very much dependent on individual sites' authority
files)
* First Match: based on Default, creates a link to the *first* authority
record that matches a given heading, even if there is more than one
authority record that matches
* Last Match: based on Default, creates a link to the *last* authority
record that matches a given heading, even if there is more than one record
that matches
The API for linker modules is very simple. All modules should implement the
following two functions:
<get_link ($field)> - return the authid for the authority that should be
linked to the provided MARC::Field object, and a boolean to indicate whether
the match is "fuzzy" (the semantics of "fuzzy" are up to the individual plugin).
In order to handle authority limits, get_link should always end with:
return $self->SUPER::_handle_auth_limit($authid), $fuzzy;
<flip_heading ($field)> - return a MARC::Field object with the heading flipped
to the preferred form. At present this routine is not used, and can be a stub.
Made the linking functionality use the SearchAuthorities in C4::AuthoritiesMarc
rather than SimpleSearch in C4::Search. Once C4::Search has been refactored,
SearchAuthorities should be rewritten to simply call into C4::Search. However,
at this time C4::Search cannot handle authority searching. Also fixed numerous
performance issues in SearchAuthorities and the Linker script:
* Correctly destroy ZOOM recordsets in SearchAuthorities when finished. If left
undestroyed, efficiency appears to approach O(log n^n)
* Add an optional $skipmetadata flag to SearchAuthorities that can be used to
avoid additional calls into Zebra when all that is wanted are authority
records and not statistics about their use
*** New sysprefs ***
* AutoCreateAuthorities - When this and BiblioAddsAuthorities are both turned
on, automatically create authority records for headings that don't have
any authority link when cataloging. When BiblioAddsAuthorities is on and
AutoCreateAuthorities is turned off, do not automatically generate authority
records, but allow the user to enter headings that don't match an existing
authority. When BiblioAddsAuthorities is off, this has no effect.
* CatalogModuleRelink - when turned on, the automatic linker will relink
headings when a record is saved in the cataloging module when LinkerRelink
is turned on, even if the headings were manually linked to a different
authority by the cataloger. When turned off (the default), the automatic
linker will not relink any headings that have already been linked when a
record is saved.
* LinkerModule - Chooses which linker module to use for matching headings
(current options are as described above in the section on linker options:
"Default," "FirstMatch," and "LastMatch")
* LinkerOptions - A pipe-separated list of options to set for the authority
linker (at the moment, the only option available is "broader_headings," which
is described below)
* LinkerRelink - When turned on, the linker will confirm the links for headings
that have previously been linked to an authority record when it runs. When
turned off, any heading with an existing link will be ignored.
* LinkerKeepStale - When turned on, the linker will never *delete* a link to an
authority record, though, depending on the value of LinkerRelink, it may
change the link.
*** Other changes ***
* Cleaned up authorities code by removing unused functions and adding
unimplemented functions and added some unit tests.
* This patch also modifies the authority indexing to remove trailing punctuation
from Match indexes.
* Replace the old BiblioAddAuthorities subroutines with calls into the new
C4::Linker routines.
* Add a simple implementation for C4::Heading::UNIMARC. (With thanks to F.
Demians, 2011.01.09) Correct C4::Heading::UNIMARC class loading. Create
biblio tag to authority types data structure at initialization rather than
querying DB.
* Ran perltidy on all changed code.
*** Linker Options ***
Enter "broader_headings" in LinkerOptions. With this option, the linker will
try to match the following heading as follows:
=600 10$aCamins-Esakov, Jared$xCoin collections$vCatalogs$vEarly works to
1800.
First: Camins-Esakov, Jared--Coin collections--Catalogs--Early works to 1800
Next: Camins-Esakov, Jared--Coin collections--Catalogs
Next: Camins-Esakov, Jared--Coin collections
Next: Camins-Esakov, Jared (matches! if a previous attempt had matched, it
would not have tried this)
This is probably relevant only to MARC21 and LCSH, but could potentially be of
great use to libraries that make heavy use of floating subdivisions.
=== TESTING PLAN ===
Note: all of these tests require that you have some authority records,
preferably for headings that actually appear in your bibliographic data. At
least one authority record must contain a "see from" reference (remember which
one contains this, as you'll need it for some of the tests). The number shown
in the "Used in" column in the authority module is populated using Zebra
searches of the bibliographic database, so you *must* have
rebuild_zebra.pl -b -z [-x] running in cron, or manually run it after running
the linker.
*** Testing the Heading match in the cataloging plugin ***
1. Create a new record, and open the cataloging plugin for an
authority-controlled field.
2. Search for an authority by entering the "see from" term in the Heading Match
box
3. Confirm that the appropriate heading shows up
4. Search for an authority by entering the preferred heading into the Main
entry or Main entry ($a only) box (i.e., repeat the procedure you usually
use for cataloging, whatever that may be)
5. Confirm that the appropriate heading shows up
*** Testing the cataloging interface ***
6. Turn off BiblioAddsAuthorities
7. Confirm that you cannot enter text directly in an authority-controlled field
8. Confirm that if you search for a heading using the authority control plugin
the heading is inserted (note, however, that this patch does not AND IS NOT
INTENDED TO fix the bugs in the authority plugin with duplicate subfields;
those are wholly out of scope- this check is for regressions)
9. Turn on BiblioAddsAuthorities and AutoCreateAuthorities
10. Confirm that you can enter text directly into an authority-controlled field,
and if you enter a heading that doesn't currently have an authority record,
an authority record stub is automatically created, and the heading you
entered linked
11. Confirm that if you enter a heading with only a subfield $a that fully
*matches* an existing heading (i.e. the existing heading has only
subfield $a populated), the authid for that heading is inserted into
subfield $9
12. Confirm that if you enter a heading with multiple subfields that *matches*
an existing heading, the authid for that heading is inserted into
subfield $9
13. Turn on BiblioAddsAuthorities and turn off AutoCreateAuthorities
14. Confirm that you can enter text directly into an authority-controlled field,
and if you enter a heading that doesn't currently have an authority record,
an authority record stub is *not* created
15. Confirm that if you enter a heading with only a subfield $a that *matches*
an existing heading, the authid for that heading is inserted into
subfield $9
16. Confirm that if you enter a heading with multiple subfields that *matches*
an existing heading, the authid for that heading is inserted into
subfield $9
17. Create a record and link an authority record to an authorized field using
the authority plugin.
18. Save the record. Ensure that the heading is linked to the appropriate
authority.
19. Open the record. Change the heading manually to something else, leaving
the link. Save the record.
20. Ensure that the heading remains linked to that same authority.
21. Change CatalogModuleRelink to "on."
22. Open the record. Use the authority plugin to link that heading to the
same authority record you did earlier.
23. Save the record. Ensure that the heading is linked to the appropriate
authority.
24. Open the record. Change the heading manually to something else, leaving
the link. Save the record.
25. Ensure that the heading is no longer linked to the old authority record.
*** Testing link_bibs_to_authorities.pl ***
26. Set LinkerModule to "Default," turn on LinkerRelink and
BiblioAddsAuthorities, and turn AutoCreateAuthorities and
LinkerKeepStale off
27. Edit one bib record so that an authority controlled field that has already
been linked (i.e. has data in $9) has a heading that does not match any
authority record in your database
28. Run misc/link_bibs_to_authorities.pl --link-report --verbose --test (you may
want to pipe the output into less or a file, as the result is quite a lot of
information)
29. Look over the report to see if the headings that you have authority records
for report being matched, that the heading you modified in step 2 is
reported as "unlinked," and confirm that no changes were actually made to
the database (to check this, look at the bib record you edited earlier, and
check that the authid in the field you edited hasn't changed)
30. Run misc/link_bibs_to_authorities.pl --link-report --verbose (you may want
to pipe the output into less or a file, as the result is quite a lot of
information)
31. Check that the heading you modified has been unlinked
32. Change the modified heading back to whatever it was, but don't use the
authority control plugin to populate $9
33. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--bib-limit="biblionumber=${BIB}" (replacing ${BIB} with the biblionumber
of the record you've been editing)
34. Confirm that the heading has been linked to the correct authority record
35. Turn LinkerKeepStale on
36. Change that heading to something else
37. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--bib-limit="biblionumber=${BIB}" (replacing ${BIB} with the biblionumber
of the record you've been editing)
38. Confirm that the $9 has not changed
39. Turn LinkerKeepStale off
40. Create two authorities with the same heading
41. Run misc/migration_tools/rebuild_zebra.pl -a -z
42. Enter that heading into the bibliographic record you are working with
43. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--bib-limit="biblionumber=${BIB}" (replacing ${BIB} with the biblionumber
of the record you've been editing)
44. Confirm that the heading has not been linked
45. Change LinkerModule to "FirstMatch"
46. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--bib-limit="biblionumber=${BIB}" (replacing ${BIB} with the biblionumber
of the record you've been editing)
47. Confirm that the heading has been linked to the first authority record it
matches
48. Change LinkerModule to "LastMatch"
49. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--bib-limit="biblionumber=${BIB}" (replacing ${BIB} with the biblionumber
of the record you've been editing)
50. Confirm that the heading has been linked to the second authority record it
matches
51. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--auth-limit="authid=${AUTH}" (replacing ${AUTH} with an authid)
52. Confirm that only that heading is displayed in the report, and only those
bibs with that heading have been changed
If all those things worked, good news! You're ready to sign off on the patch
for bug 7284.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on latest master and squashed follow-up, 16 February 2012
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on latest master, 21 February 2012
Signed-off-by: schuster <dschust1@gmail.com>
This patch changes the default value of the 06 char in 008
from 't' to 'b.' This change allows for a valid 008 field
if no dates are entered in 07-14.
To test:
1. Create a new MARC record (prior to patch application).
2. Click on the 008 field to auto-populate.
3. Note that the 06 char is 't'.
4. Apply patch.
5. Create a new MARC record.
6. Click on the 008 field to auto-populate.
7. Note that the 06 char is now 'b'.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Confirm fix works per test plan.
Signed-off-by: Melia Meggs <melia@test.bywatersolutions.com>
A library using an inhouse callnumbering system wants to be able to generate the next available call number not already in use. This custom call number plugin returns the next callnumber not already in use once a correct prefix has been entered. The prefixes are four to six letters, space, then one or two numbers.
This patch makes it so that you can click 'edit items' and actually
edit items.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Works as advertised.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
In the data entry form, there is a (hidden) functionality for note subfields.
MARC21 500-599 and UNIMARC 300-399 subfields are displayed in TEXTAREA rather
than INPUT tags. This is good since usually notes can be pretty long. But if
one of those fields is marked in the framework as 'hidden', then it isn't
displayed at first when you create a record and when you expand the field by
clicking on its label the field is displayed in a one-line INPUT tag.
To reproduce this bug:
- Modify your framework:
MARC21: 500$a, hidden=1
UNIMARC: 300$a, hidden=1
- Create a new biblio record with this framework
- Open the tab containing 500 or 300 field
- 500 or 300 tab is collapsed
- Click on 500 or 300 label to expand the field
- 500$a or 300$a is displayed in a one-line INPUT tag, not in a TEXTAREA
as it should
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test plan works. Also checked cloning and deleting
subfields still works.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Works as advertised. Simplifies code too. Well documented test plan.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
- Adding subtitle to the display of titles to be merged
- Adding a link to preview the MARC record of titles to be merged
- Fixing up markup of form to improve appearance
- Correcting breadcrumbs
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
ModBiblio() - set framework to "" if "Default"
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All 4 tests passed:
Test 1: Merge two records with the same framework
Desired result: shouldn't get any prompting to pick a framework, and the
same framework should be used
Test 2: 2 records, different frameworks, into the kept record's framework
Desired result: merge with kept records framework used
Test 3: 2 records, different frameworks, into the discarded record's
framework
Desired result: merge with used records framework used
Test 4: 2 records, different frameworks, into a third framework
Desired result: merge with third framework used
Changed searchResults() interface
Added trailing \n when parsing OpacHiddenItems to make YAML happy
XSLTParse4Display() and buildKohaItemsNamespace() take hidden
items as input param
Removed numbering from the search results, looks wrong with
hidden items
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The original patch for 5533 removed the Lost status from the edit items screen; new items were not affected,
and batch changes could still be made, so this was not a consistent change.
This patch removes the filter that hid the Lost status dropdown, but then changes the default MARC framework
to hide this field by default (value -5). New installations will not see this status in the editor, unless
they manually activate it. This will enforce the semantics of using the "mark lost" options by default, but
provide a workaround for libraries that understand and accept the consequences of manually editing this field.
To test:
1. on an existing install, edit an item. you should have the Lost status visible
2. on a new install, editing or creating an item should not show the Lost status at all
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Some paths to the FA item-add screen didn't have a branch defined--if the param is set,
use it, otherwise, use the user's logged in branch.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Modified for syntax by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Some paths to the FA item-add screen didn't have a branch defined--if the param is set,
use it, otherwise, use the user's logged in branch.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
When no size info is available, an empty string is
sent to the TT (if nothing is sent, the TT engine
will display another information, irrelevant for Koha).
Signed-off-by: Gaetan Boisson <gaetan.boisson@biblibre.com>
Works beautifully!
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
With the addition of the code from Bug 5528 (easy analytic record workflows),
UNIMARC 461$0 and MARC21/NORMARC 773$0 have special meanings. When you import
a record that uses those subfields for different data, you will get an error
in /cataloguing/additem.pl. A check should be added to be sure that
EasyAnalyticalRecords is enabled before trying to handle the 461$0/773$0 as
bib numbers for analytics.
Thanks to Frère Sébastien Marie for spotting this issue.
Signed-off-by: Frère Sébastien Marie <semarie-koha@latrappe.fr>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Using the delete all items function should now redirect back to the
biblio view specified in the BiblioDefaultView system preference.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The 3 files had use strict missing. The patch add the use strict and modify what's needed to work with it
4XX.pl also has some perlcritic fixes:
Variable declared in conditional statement at line XXX, column 9. Declare variables outside of the condition. (Severity: 5)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Links to UNIMARC documentation were being shown when marcflavour =
NORMARC. This patch hides the doc link functionality for NORMARC
by hiding:
1. The checkbox for turning doc links on/off
2. The hyperlinked questionmarks
This patch does not hide e.g. the JavaScript functions related to
the doc link functionality, in order to make it easy to add
doc links for NORMARC in the future (hopefully).
The doc link functionality was passing a variable called MARC21
(based on the contents of the marcflavour syspref) to the
template and testing the value of this to decide if MARC21 or
UNIMARC doc links were to be shown. I have replaced this variable
with he standard/full marcflavour syspref, in order to make it
possible to test for more then two MARC dialects.
To test:
- Set the marcflavour syspref to MARC21, NORMARC and UNIMARC, one
after the other.
- Check that correct doc links are shown for MARC21 and UNIMARC
on the cataloguing screen, and that no checkbox and no doc links
are displayed for NORMARC.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described - thx for the great test plan!
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
