[1] passing unsafe has no use since it is a scalar, removed it to unconfuse
[2] remove caching when pref is disabled
[3] caching userid removes the need for calling Patron->find each time
[4] subsequent changes in unit test
[5] cosmetic renames to move from session to daily basis (changed dev angle)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
First call going thru Koha::Patron takes about 0.0150 sec.
Subsequent calls only use caching and take about 0.0006 sec.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test Plan:
1) Apply this patch
2) Start a new session ( a private browser window works well )
3) Note the lastseen column in the borrowers table is updated
4) Browse a few pages, not the lastseen column is not updated again
5) Close the browser window and repeat steps 2-4
6) prove t/db_dependent/Auth.t
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
- "your routing lists" tab is now highlighted when active
- get_routinglists was renamed to get_routing_lists
- Koha::Patron->get_routing_lists returns the ->search result
directly
- Koha::Subscription::RoutingList->subscription uses DBIC
relationship
- Undo changes to C4/Auth.pm
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the base for the new feature:
Show a list of the serial titles a patron is on routing
lists for in the OPAC.
Test plan applies to the complete patch set:
To test:
- Apply all patches
- Make sure RoutingSerials is not activated
- Check patron account in OPAC - no tab should appear
- Activate RoutingSerials
- Create subscriptions and different routing lists, test with:
- Patron with no routing list entries = no tab
- Patron with one or more routing list entries = tab appears
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20400: Rewrite using Koha::Objects
Adds
- Koha::Subscription::Routinglist
- Koha::Subscription::Routinglists
Adds 2 methods
- Koha::Patron::get_routinglists
- Koha::Routinglist::subscription
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20400: Add unit tests
prove t/db_dependent/Koha/Subscription/Routinglists.t
prove t/db_dependent/Koha/Patrons.t
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20400: Display new tab in OPAC only for patrons with routing lists
The visibility of the routing list tab in the OPAC depends
on the system preference RoutingSerials and the existence
of routing list entries for the patron.
Some libraries only offer routing lists to certain user groups and
would not want it generally visible. As there are currently no
actions you can perform from the list, this appears to be a
reasonable behaviour.
See test plan in first patch.
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20400: (follow-up) Use Asset TT plugin on opac-routing-lists.tt
Patch applies and functions as described.
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20400: (QA follow-up) Redirect to 404 if routing is disabled
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Login will still break in opac-user.pl, but that seems a bigger problem
not from SCI module
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Try to log in to opac with a superlibrarian
2 - Everythign goes wrong
3 - Apply patch
4 - Try to log in with superlibrarian
5 - You can sign in
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes C4::Templates::gettemplate set the KOHA_VERSION param
for the template. This way this template parameter, which is required by
(probably) all pages that include CSS/JS content is available in all
circumstances.
A noticeable problem with the current approach is when using the SCO and
SCI modules with wrong/forbidden users: C4::Auth short-circuits and
redirects to the login page, without setting the KOHA_VERSION param.
This patch solves it for good.
To test:
- Enable the SCI module
- Open the browser at
http://localhost:8080/cgi-bin/koha/sci/sci-main.pl
- Login with the db user (koha_kohadev / password)
=> FAIL: Login failure, but styling is broken
- Apply this patch
- Retry
=> SUCCESS: Everything looks as it should!
- Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the existing code for SCO use the new permissions schema
for self check modules. Specifically addresses this change:
circulate => self_checkout
becomes
slef_check => self_checkout_module
about.pl checks are dejusted too.
get_template_and_user gets refactored to avoid code duplication and the
conditions are adjusted for the new permissions.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the SCI module, and adapts C4::Auth to know about it.
The current behaviour is:
- Requires admin user initialization/login
- Uses the logged users' library
- A form allows to scan multiple barcodes
- A button sends the barcode list to the controller
to batch perform the checkins
- Successful and failed checkins are sent to the template
- Results are displayed
- Logout link
To test:
- Apply this patches
- Make sure you upgrade:
$ kshell
k$ perl installer/data/mysql/updatedatabase.pl
- Have 'SelfCheckInModule' disabled
- Go to http://kohadev.myDNSname.org:8080/cgi-bin/koha/sci/sci-main.pl [1]
=> SUCCESS: You are rejected because the feature is disabled
- Enable 'SelfCheckInModule'
- Go to the previous URL
=> SUCCESS: You are required to login
- Login with a user WITHOUT self_checkout permissions
=> SUCCESS: You are not allowed to log into the Self check-in module.
- Login with a user WITH self_checkour permissions
=> SUCCESS: You gain access, and are presented the UI
- Go through the several options
=> SUCCESS: All works as it should
- Click the 'Help' link
=> SUCCESS: A help text is displayed on a modal
- Sign off :-D
- Bonus points:
$ kshell
k$ qa -c 2 -v 2
=> SUCCESS: All tests green
[1] Adjust to your dev's OPAC setup
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
CAS supports single logout, where if you logout of one application it
logs you out of all of them.
This bug implements this
You will need a CAS server (with single logout configure),
and at least 2 applications (one being Koha)
1/ In Koha login via CAS
2/ Login to the other application via CAS
3/ Logout of the other application
4/ Notice you are still logged into Koha
5/ Log out of Koha
6/ Apply patch
7/ Login to Koha via CAS, login to other app via CAS
8/ Log out of other app
9/ Notice you are logged out of Koha
If you dont have CAS, this patch should be a no op, you could test that
1/ Login and logout normally
2/ Apply patch
3/ Login and logout still work fine
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Patch works as described, local login still works correctly.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Needed when logging out and in again..
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Victor Grousset <victor.grousset@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Instead of basing the group searches on the group name, which is an
inherently touchy system, we should use the same checkbox style that
Jonathan introduced for the patron limits by group feature.
Test Plan:
1) Check to ensure existing group searches still show as they used to
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On first login, Koha explodes before the logged in user does not exist
in DB.
This patch deals with that by adding several checks when it's needed.
Test plan:
Use the DB user to create a superlibrarian user.
The DB user should no be allowed to do anything else.
Signed-off-by: Signed-off-by: Jon McGowan <jon.mcgowan@ptfs-europe.com>
Bug 18403: Fix patron creation
memberentry.pl can be called to create a new patron, in that case the
patron does not exist yet.
Signed-off-by: Signed-off-by: Jon McGowan <jon.mcgowan@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Technical note:
To ease future changes we are passing a logged_in_user variable to templates.
It contains the Koha::Patron object representing the logged in patron.
This will be very useful for this patch and even after (for instance we will be
able to replace easily loggedinusername and loggedinusernumber).
Signed-off-by: Signed-off-by: Jon McGowan <jon.mcgowan@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test Plan:
1) Apply this patch set
2) Note your existing search groups have been ported over to the new
__SEARCH_GROUPS__ group if you had any
3) Create the group __SEARCH_GROUPS__ if one does not already exist
4) Add some first level subgroups to this group, add libraries to those groups
5) Search the library group searching in the intranet and opac
6) Note you get the same results as pre-patch
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is a legacy mode that did not really work.
Test plan:
Play with frameworks and sysprefs and confirm the changes
(add/del/update) are taken into account.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Similar to the full path test in sub themelanguage, this patch makes a
change in _get_template_file. This allows you to pass a template
outside the modules directory to get_template_and_user. (Note: the sub
badtemplatecheck already blocks bad paths.)
Especially, this would be helpful for plugins using templates. As can be
seen in Templates.pm, a change was made earlier to overwrite the filename
for a plugin in sub gettemplate. This exception can now be removed.
Also note the small change in Koha/Plugin/Base.pm; mbf_path is already
absolute and if we pass a full path, we do not need it. This allows use of
a regular Koha template or a shared template between plugins (as long as
badtemplatecheck allows the path).
What are the side-effects of this change?
[1] We should not pass absolute paths if we mean relative ones.
A follow-up patch deals with one occurrence in the codebase.
No regressions for regular use.
[2] Plugins can call get_template_and_user directly or go via get_template
in Koha/Plugin/Base (absolute paths don't go via mbf_path).
Note: replaced two single quotes in Auth.pm to show template name in test
description.
Test plan:
[1] Open some page on OPAC or staff client to trigger a template.
[2] Run t/db_dependent/Auth.t to verify not allowing some bad templates.
[3] Run t/db_dependent/Templates.t to verify an absolute path.
[4] Run t/db_dependent/Plugins.t to verify using templates in a plugin.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The bad template check in get_template_and_user can be removed, since
this check has been added in gettemplate on bug 18010.
The check moves here to a new sub in C4::Templates. And will be extended
in a follow-up.
Removed unused variable $path in gettemplatefile.
Test plan:
[1] Run t/db_dependent/Auth.t (get_template_and_user bad calls).
[2] Run t/db_dependent/Templates.t (bad call to gettemplate).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Indeed if RequireStrongPassword is set we need at least 3 characters to
match 1 upper, 1 lower and 1 digit.
We could make things more complicated to allow minPasswordLength < 3
but, really, 3 is already too low...
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Do not fill @return if retval == -1 for LDAP (see cfc484b17).
No need to call store after an DBIx update. Rearranged the if statement.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
A regression in commit cfc484b17 / bug #18314 breaks the local
authentication fallback for all external authentications like LDAP, CAS
and Shibboleth.
The regression itself is a logical error as "@return = (0)" is
considered to be "false" when checked with "unless" (line 1814). That's
wrong as "unless" tests the number of elements in a list.
This patch tries to simplify the logic by adding a $passwd_ok and
$check_internal_as_fallback flags to be more verbose and hopefully more
understandable.
The goal here is simply to restore back the same logic as before cfc484b17
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
GetMember returned a patron given a borrowernumber, cardnumber or
userid.
All of these 3 attributes are defined as a unique key at the DB level
and so we can use Koha::Patrons->find to replace this subroutine.
Additionaly GetMember set category_type and description.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
C4::Members::GetBorrowersWithEmail can be easily replaced with
Koha::Patrons->search({ email => $email });
Test plan:
Confirm that you are still able to use PKI authentication
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To prevent brute force attacks on Koha accounts, staff and opac, we need to
implement an account lockout process to Koha.
After a number of failed login attempts a users account would become locked.
The user would then need to use the reset password functionality to send a reset
token to their email account. After a successful password reset the lockout flag
would be removed.
The number of failed login attempts before lockout is configurable using a new
system preference 'FailedLoginAttempts'.
How does it work?
When a patron enter an invalid password, the borrowers.login_attempts value
for this patron is incremented. When this value reach the value of the
pref FailedLoginAttempts, the password comparison is not done and the
authentication is rejected.
This login_attempts field is reset when a patron correctly logs in. When
the account is locked the patron has to reset his/her password using
the OpacResetPassword feature or ask a staff member to generate a new
password.
If the pref is not set (0, or '') the feature is considered as disabled,
but the failed login attempts are stored anyway.
Test plan:
0/ Apply patch and execute the update DB entry
1/ Switch on the feature by setting FailedLoginAttempts to 3
2/ Use an invalid password to login at the staff or OPAC interface
3/ After the third consecutive failures, you will be asked to reset your
password if OpacResetPassword is set, or contact a staff member
4/ Switch on OpacResetPassword and reset your password
5/ Confirm that you are able to login
6/ Play with the different combinations
QA details: The trick happens in C4::Auth::checkpw, to make things clear
I had to create a return value (note the awesome name: @return) and
replace the 3 successives if statements with elsif. Indeed if one of
the condition is reached, it will return inside the given block.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1. Drop and recreate your db
2. Clear memcached
3. Go through the installer (to speed up this test plan install all
sample data so you dont have to create libraries, patron categories etc. later)
4. On the installer page login as the database user and notice that it
does not work on the first attempt ( you get 'Error: You do not have
permission to access this page')
5. Try logging in as database user for a second time and notice you are
logged in successfully this time
4. In staff interface create a patron account with superlibrarian permissions
5. Logout of the staff interface
6. Login as database user
7. Notice you cant log in. You get the 'Error:: You do not have permission to access this
page' error
8. Try a second attempt and notice you get the same error
9. Open the URL in a new tab and notice the staff interface appears
showing that you are logged in
10. log out and log back in as the superlibrarian user you created and
notice it works on first login attempt
11. Apply patch
12. Log out and try logging back in as database user and notice that you
can login successfully on first attempt
13. Repeat steps 1,2,3 and login as database user and notice the login
works on first attempt
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This features would add the ability to create clubs which patrons may be
enrolled in. It would be particularly useful for tracking summer reading
programs, book clubs and other such clubs.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Ensure your staff user has the new 'Patron clubs' permissions
4) Under the tools menu, click the "Patron clubs" link
5) Create a new club template
* Here you can add fields that can be filled out at the time
a new club is created based on the template, or a new enrollment
is created for a given club based on the template.
6) Create a new club based on that template
7) Attempt to enroll a patron in that club
8) Create a club with email required set
9) Attempt to enroll a patron without an email address in that club
10) Create a club that is enrollable from the OPAC
11) Attempt to enroll a patron in that club
12) Attempt to cancel a club enrollment from the OPAC
13) Attempt to cancel a club enrollment from the staff interface
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When logging out from OPAC, plack-error.log log and/or opac-error.log
complain about 'uninitialized value $user' in C4/Auth.pm line 187. The
warning is not necessary, this patch removes it.
To test:
- try to trigger warning
- apply patch
- verify that warning no longer occurs
- prove t/db_dependent/Auth.t
- verifiy that SCO still behaves like before (especially if
you break out from sco path)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Updating to use they/them and skipping the ones changed to it
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Comments throughout the Koha codebase assume that
all librarians or borrowers are male by using the
pronoun 'he' universally. This patch changes to
'he or she' / 'him or hers'.
Testing plan:
- ensuring modifying tests still pass:
+ C4/SIP/t/06patron_enable.t
+ t/db_dependent/Circulation.t
+ t/db_dependent/Koha/Patrons.t
+ t/db_dependent/Reserves.t
Sponsored-By: California College of the Arts
No code changes detected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
By restoring some pieces of logic, with the name changed from $persona
to $emailaddress, the openid will work again for OPAC logins.
See https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=10988#c68
for an excellent test plan.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Did not test it, but trust in author and signoffer
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Tests are now in t/db_dependent/Search/History.t
- There were 2 differents sysprefs in sysprefs.sql and in atomicupdate => fixed
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Added a syspref LoadHistory addSearchHistoryToTheFirstLoggedUser to select if you want the system to add the history of searches performed without session when you log in as registered user.
TEST PLAN
1 - Search in the catalogue, check you are not logged
2 - Log in : your last history should appear
4 - Log out
5 - Apply the patch
6 - Repeat 1 and 2
7 - Desactivate the syspref addSearchHistoryToTheFirstLoggedUser
8 - Repeat 1 and 2 : your last history shouldn't appear
The Unit test doesn't rollback but delete the added lines : the function get_template_and_user allway sets the autocommit to 1.
https://bugs.koha-community.org/show_bug.cgi?id=8010
Tested 3 patches together, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
From opac/opac-memberentry.pl, authnotrequired is set.
That means a patron can access the page without being logged in. It is
used on this page for the self registration feature.
From C4::Auth::get_template_and_user, we have
$userid = $q_userid;
$q_userid is previously set to the 'userid' CGI param.
We end up here if authonotrequired is set AND CGISESSID does not exist.
Test plan:
- Run:
$ prove t/db_dependent/Auth.t
=> FAIL: Regression test for checkauth fails
- Apply this patch
- Run:
$ prove t/db_dependent/Auth.t
=> SUCCESS: Tests pass.
- Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This features would add the ability to create clubs which patrons may be
enrolled in. It would be particularly useful for tracking summer reading
programs, book clubs and other such clubs.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Ensure your staff user has the new 'Patron clubs' permissions
4) Under the tools menu, click the "Patron clubs" link
5) Create a new club template
* Here you can add fields that can be filled out at the time
a new club is created based on the template, or a new enrollment
is created for a given club based on the template.
6) Create a new club based on that template
7) Attempt to enroll a patron in that club
8) Create a club with email required set
9) Attempt to enroll a patron without an email address in that club
10) Create a club that is enrollable from the OPAC
11) Attempt to enroll a patron in that club
12) Attempt to cancel a club enrollment from the OPAC
13) Attempt to cancel a club enrollment from the staff interface
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
If a patron is not allowed to access the staff interface because its IP
address in the authorised range of IPs, the cookie should not contain
the CGISESSID.
If it is, the patron is logged in and will be able to access the staff
interface if he reload the page (or hit another one).
Test plan:
Confirm the that AutoLocation feature is now working as expected.
Note: It seems that this feature has never really worked as intended.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
At the OPAC, the AutoLocation feature should not be taken into account:
login to the OPAC from outside the IP range should work
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Those 2 prefs can be independent and it does not make sense to consider
AutoLocation only if IndependentBranches is set.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The example in branches.tt is:
Can be entered as a single IP, or a subnet such as 192.168.1.*
But actually the regex in C4::Auth does not handle subnets.
Test plan:
0/ Apply all the patches
1/ Switch AutoLocation on
2/ Define a subnet (192.168.0.* if your ip is like 192.168.0.X) in the IP
range of your library
3/ Log in on the staff interface
=> Should work
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Persona never really took off, and although many browsers currently
support it, very few services actually implement it.
This has lead to it's founders, Mozilla, to end the project. In their
own words:
=============================================================================
Persona is no longer actively developed by Mozilla. Mozilla has
committed to operational and security support of the persona.org
services until November 30th, 2016.
On November 30th, 2016, Mozilla will shut down the persona.org services.
Persona.org and related domains will be taken offline.
If you run a website that relies on Persona, you need to implement an
alternative login solution for your users before this date.
For more information, see this guide to migrating your site away from
Persona:
https://wiki.mozilla.org/Identity/Persona_Shutdown_Guidelines_for_Reliers
=============================================================================
Given the above, and that the Persona authentication methods as a whole
are no longer being actively maintained by anyone anywhere to ensure
ongoing security, we should deprecate the option from koha.
Test plan:
Apply this patch and make sure you do not find any references of Persona
Have a look at patches from bug 9587 and confirm that everything has
been reverted
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Code looks good to me.
Also ran several tests including: Auth.t, Auth_with_shibboleth.t.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
From C4::Auth:
my $patron = Koha::Patrons->search({ userid => $userid })->next;
This should be replaced with
my $patron = Koha::Patrons->find({ userid => $userid });
userid is a unique key
Caught with NYTProf:
# spent 78.9ms making 1 call to Koha::Objects::next
Test plan:
Login at the intranet
Reload the page
=> You must still be logged in
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested by enabling TrackLastPatronActivity and logging in again.
Verified lastseen column in borrowers.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Do not track when the pref has not been enabled.
This patch moves the conditional update in Auth.pm to Koha::Patron.
And adds a test for the new track_login method.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In order to add the ability to delete patrons who have been inactive for
more than a given time, we need to track down the last time they were
active.
To do that, we need a new DB column in the borrowers table (lastseen).
Note that the borrowers.lastseen column will not be initialised for existing
installations (set to NULL) so inactive existing patrons will never be
deleted.
A workaround would be to init them at the date when the new column will
be added.
Test plan:
0/ Set the new pref TrackLastPatronActivity on
1/ Log in as a patron (staff or OPAC)
2/ Check that the borrowers.lastseen field has been updated with the
current time
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
https://bugs.koha-community.org/show_bug.cgi?id=12276
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] Acquisition.pm
The lines filling $row in GetBasketGroupAsCSV may have side-effects when
the library name is not found. This change restores former behavior. Just
theoretically more safe.
Note that it also contained a typo: $row->{deliveryplace} should have been
$row->{$place}.
[2] Auth.pm
checkauth: $branchname = Koha::Libraries->find($branchcode)->branchname;
Should normally be fine, but I rather have an empty string here than
crashing on "Can't call method branchname on undefined value".
Same for sub check_api_auth.
Note that this holds for a larger number of calls, but I am adding a check
here because it is checkauth.
Also removed a duplicate use Koha::Libraries-statement.
[3] Search.pm
Also removed a duplicate use statement for Libraries.
[4] svc/holds
Added an (explicit) use statement for Koha::Libraries.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is the fourth and last patch set to remove C4::Branch.
The real purpose of this patch is to standardise and refactor some code
which is related to the libraries selection/display.
Its unconfessed purpose is to remove the C4::Branch package.
Before this patch set, only 6 subroutines still existed in the C4::Branch
package:
- GetBranchName
- GetBranchesLoop
- mybranch
- onlymine
- GetBranches
- GetBranch
GetBranchName basically returns the branchname for a given branchcode.
The branchname is only used for a display purpose and we don't need to
retrieve it in package or pl scripts (unless for a few exceptions).
We have a `Branches` template plugin with a `GetName` method which does
exactly this job.
To achieve this removal, we will use this template plugin and delete the
GetBranchName from pl and pm files.
The `Branches.all()` will now select the library of the logged in user
if no `selected` parameter has been passed.
This new behavior could cause regressions, for instance there are some
places where we do not want an option preselected (batch item
modification for instance), keep that in mind when testing.
GetBranchesLoop took 3 parameters: $branch and $onlymine.
The first one was used to set a "selected" flag, for a display purpose:
select an option in the libraries dropdown lists.
The second one was useless: If not passed or set to 0, the
`C4::Branch::onlymine` subroutine was called.
This onlymine flag was use to know if the logged in user was able to see
other libraries infos.
A patron can see the infos from other libraries if IndependentBranches
is not set OR if he has the superlibrarian permission.
Prior to this patch set, the "onlymine test" was done on different
places (neworderempty.pl, additem.pl, holidays.pl, etc.), including the
Branches TT plugin. In this patch set, this test is only done on one
place (C4::Context::only_my_library, code moved from
C4::Branch::onlymine).
To accomplish the same job as this subroutine, we just need to call the
`Branches.all()` method from the `Branches` TT plugin. It already
accepts a `selected` parameter to set a flag on the option to select.
To avoid the repetitive
[% IF selected %]<option selected="selected">[% ELSE %]<option>[% END %]
pattern, a new `html_helpers` TT include file has been created, it
defines an `options_for_libraries` block, which takes a `selected`
parameter. We could imagine to use this include file for other
selects.
The 'mybranch` and `onlymine` subroutines of the C4::Branch package have
been moved to C4::Context. onlymine has been renamed with
only_my_library. There are only 4 occurrences of it, against 11 before
this patch set.
There 2 subroutines are Context-centric and it makes sense to put them
in `C4::Context` (at least it's the least worst place!)
GetBranches is the tricky part of this patch set: It retrieves all the
libraries, independently of the value of IndependentBranches.
To keep the same way as the existing calls of `Branches.all()`, I have
added a `unfiltered` parameter. If set, the `Branches.all()` will call
a usual Koha::Libraries->search method, otherwise
Koha::Libraries->search_filtered will be called. This new method will
check if the logged in user is allowed to see other libraries or only
its library.
Note that this `GetBranches` subroutine also created a `category` key:
it allowed to get the list of groups (of libraries) where this library
existed. Thanks to a previous patch set (bug 15295), this value was
not used anymore (I may have missed something!).
Note that the only use of `GetBranch` was buggy (see bug 15746).
Test plan (for the whole patch set):
The best way to test this whole patch set is to test with 2 instances: 1
with the patch set applied, 1 using master, to be sure there is no
regression.
It would be good to test the same with `IndependentBranches` and the
without `IndependentBranches`.
No difference should be found.
The tester must focus on the library dropdowns on as many forms as
possible.
You will notice changes in the order of the options: the libraries will
now be ordered by branchname (instead of branchcode in some places).
A special attention will be given to the following page:
- acqui/neworderempty.pl
- catalogue/search.pl
- members/members-home.pl (header?)
- opac/opac-topissues.pl
- tools/holidays.pl
- admin/branch_transfer_limits.pl
- admin/item_circulation_alerts.pl
- rotating_collections/transferCollection.pl
- suggestion/suggestion.pl
- tools/export.pl
Notes for QA:
- There are 2 FIXMEs in the patch set, I have kept the existing behavior,
but I am not sure it's the good one. Feel free to open a bug report and
I will fill a patch if you think it's not correct. Otherwise, remove the
FIXME lines in a follow-up patch.
- The whole patch set is huge and makes a lot of changes.
But it finally will tremendously reduce the number of lines:
716 insertions for 1910 deletions
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
TODO: Would be better to provide a better way to know if memcache is correctly set
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mojolicious does not set $ENV{REMOTE_ADDR} (neither $ENV{HTTP_*}) as
it may share ENV between different requests.
Fortunately for us, Plack does not!
This is a dirty patch to fix this issue but it seems that there is not
lot of solutions. It adds a remote_addr parameter to
C4::Auth::check_cookie_authin order to send it from
Koha::Rest::V1::startup reading the headers sent by Mojolicious.
Test plan:
Hit /cgi-bin/koha/mainpage.pl
Hit /api/v1/patrons/42
Hit /cgi-bin/koha/mainpage.pl
With this patch applied, everything will be fine and you won't be
logged out.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
0) Have either CAS or Shibboleth authentication enabled under Plack.
1) Hover over the authentication link on the staff client or OPAC, and
notice that it has either '.../opac/...' or '.../intranet/...' instead
of '.../cgi-bin/koha/...'. (This will be a complete dealbreaker for CAS
authentication.)
2) Apply patch.
3) Check links again; they should now have the correct paths.
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Did not test CAS or Shibboleth, but no regression found.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Bug 14507 introduced the use of checkpw in C4::SIP::ILS::Patron so that
non-Koha internal authentication processes would be able to function via
SIP ( LDAP et al ).
The problem is that checkpw changes the userenv to that of the patron!
This is not usually an issue in Koha because most of the time that
patron running through checkpw is the one to be logged in.
Aside from SIP2 the only other area where this may be an issue is in SCO
when using SelfCheckoutByLogin.
Test Plan:
1) On master, check out an item to a patron via SIP2
2) Note the checkout lists the item as having been checked out
from the patron's home library not matter which library is was
supposed to be checked out from.
3) Apply this patch
4) Re-checkout the item
5) The item should now be checked out as if it was checked out from
the library as defined in the SIP configuration file.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This uses a hacky but simple method to get the correct script name under
proxied packaged Plack.
Test plan:
1) Log out of both the OPAC and staff side.
2) Try to access a page that requires login (opac-reserve.pl is a
good one for the OPAC), then log in.
3) You will be redirected back to mainpage.pl or opac-user.pl.
4) Repeat above for both staff side and OPAC.
5) Apply patch.
6) Repeat steps 1-4; you should be redirected back to the original
page you were on.
7) Repeat the above for both a traditional CGI and kohadevbox/package
Plack installation.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
There are 2 prefs to drive this feature: StaffAuthorisedValueImages and
AuthorisedValueImages. AuthorisedValueImages is not added by
sysprefs.sql and does not appear in updatedatabase.pl, we could easily
imagine that nobody uses it.
With XSLT enabled, the feature is only visible on a record detail page
at the OPAC, if AuthorisedValueImages is set. Otherwise you need to turn
the XSLT off. In this case you will see the images on the result list
(OPAC+Staff interfaces) and OPAC detail page, but not the Staff detail
page.
This patch suggests to remove completely this feature as it does not
work correctly.
The ability to assign an image to an authorised value is now always
displayed, but the image will only be displayed on the advanced search
if defined.
Test plan:
Confirm that the authorised value images are no longer visible at the
opac and the staff interfaces.
The prefs should have been removed too.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently if not logged in when browsing to
http://YOURCATALOG/cgi-bin/koha/sco/sco-main.pl
You are redirected to opac-auth.tt and SCOUserCSS and SCOUserJS are not
loaded. This page passes through a parameter to the template to indicate
this is an SCO login and appropriate CSS and JS should be loaded.
Additionally this patch ensure that when loggin in using the form you
are redirected to the sco-main.pl instead of the patron account page for
the user.
To test:
1 - Verify that normal login works on both staff and opac
2 - Verify that SCO link goes to login page if AutoSelfCheckAllowed is
set to "Don't allow"
3 - Enter changes into SCOUserJS and SCOUserCSS and observe these are
present on SCO log in page with AutoSelfCheck disabled
4 - Verify that a logged in opac user without permissions cannot access
the self-checkout module
5 - Verify that AutoSelfCheckAllowed and associated system preferences
function as expected
6 - Verify the AutoSelfCheck user is logged out if they attempt to visit
another page
Followed test plan.
If I go to http://YOURCATALOG/cgi-bin/koha/sco/sco-main.pl, CSS and JS trigger already on
the login form, I suppose that is intended.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
The login page should not be displayed if the page is displayed in a
frame.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
Test Plan (remains the same):
0) Back up your database
1) Apply all these patches
2) In your mysql client use your Koha database and execute:
> DELETE FROM systempreferences;
> SOURCE ~/kohaclone/installer/data/mysql/sysprefs.sql;
-- Should be no errors.
> SELECT * FROM systempreferences LIKE 'GoogleO%';
-- Should see 4 entries.
> QUIT;
3) Restore your database
4) Run ./installer/data/mysql/updatedatabase.pl;
5) In your mysql client use your Koha database and execute:
> SELECT * FROM systempreferences LIKE 'GoogleO%';
-- Should see the same 4 entries.
6) Log into the staff client
7) Home -> Koha administration -> Global system preferences
8) -> OPAC
-- make sure your OPACBaseURL is set (e.g. https://opac.koha.ca)
9) -> Administration
-- There should be a 'Google OAuth2' section with the ability
to set those 4 system preferences.
10) In a new tab, go to https://console.developers.google.com/project
11) Click 'Create Project'
12) Type in a project name that won't freak users out, like your
library name (e.g. South Pole Library).
13) Click the 'Create' button.
14) Click the 'APIs & auth' in the left frame.
15) Click 'Credentials'
16) Click 'Create new Client ID'
17) Select 'Web application' and click 'Configure consent screen'.
18) Select the Email Address.
19) Put it a meaningful string into the Product Name
(e.g. South Pole Library Authentication)
20) Fill in the other fields as desired (or not)
21) Click 'Save'
22) Change the 'AUTHORIZED JAVASCRIPT ORIGINS' to your OPACBaseURL.
(http://library.yourDNS.org)
23) Change the 'AUTHORIZED REDIRECT URIS' to point to the new
googleoauth2 script
(http://library.yourDNS.org/cgi-bin/koha/svc/auth/googleopenidconnect)
24) Click 'Create Client ID'
25) Copy and paste the 'CLIENT ID' into the GoogleOAuth2ClientID
system preference.
26) Copy and paste the 'CLIENT SECRET' into the GoogleOAuth2ClientSecret
system preference.
27) Change the GoogleOpenIDConnect preference to 'Use'.
28) Click 'Save all Administration preferences'
29) In the OPAC, click 'Log in to your account'.
-- You should get a confirmation request, if you are
already logged in, OR a login screen if you are not.
-- You need to have the primary email address set to one
authenticated by Google in order to log in.
30) Run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Mainly a
perl -p -i -e 's/^.*3.07.00.049.*\n//' **/*.pm
Then some adjustements
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
perl -p -i -e 's/^(use vars .*)\$VERSION\s?(.*)/$1$2/' **/*.pm
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The singleBranchMode system preference does not make sense.
Either the install has only 1 library defined or several. In both case,
we can easily guess the behavior to follow.
So the idea of this patch is to replace the fetch of this syspref with a
call to count the number of libraries defined in DB.
Test plan:
1/ From a fresh Koha install, execute the DB entry to remove the pref.
2/ Define only 1 library
3/ Confirm that Koha behaves the same as before (try to change your
library, look at the facets)
4/ Create another library (or more) and reinsert the pref and set it:
insert into systempreferences (variable, value)
values('singleBranchMode', 1);
5/ Execute the DB entry
You should get a warning message.
6/ Repeat 3.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Does what it says, but will change behaviour for any Koha install that
has 2 branches defined, One circulation, and this preference set.
If that is an acceptable change, we might need to make sure this is noted well in the
release notes.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
Log you in!
Without this patch applied, you will get a warning
"Fetching the value or values of a single named parameter"
With this patch applied, the warning from C4::Auth line 401 should not
appear anymore in the log file.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Note: no warnings for older CGI versions.
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
If you use multiple instances on one server, you could have the situation
that instance A creates the cgisess subfolder and instance B could have a
permission problem. This patch resolves that by allowing each instance to
have its own cgisess subfolder.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
When some users want to improve performance, one suggestion is to switch the syspref "sessionstorage" to 'tmp',
which store the session info in the /tmp directory instead of the database.
Depending on the frequency of the cleaning process (or lack thereof),
this can be heavy pollution into the /tmp directory, making it unusable.
"rm cgi*" would not even work since cgi* extends to over 8000 items...
A simple fix is to modify the target directory in C4/Auth.pm to /tmp/cgisess.
Testing scenario:
1) change the syspref SessionStorage to 'tmp'
2) Log into the OPAC, validate that a file named /tmp/cgisess_(something) got created
3) Apply the patch
4) Log into the OPAC, validate that a file /tmp/cgisess/cgisess_(something) got created
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Works as advertised. Session files are created in /tmp/cgisess/ instead
of directly in /tmp. I usually store sessions in memcached, but a
couple of times memcached has died on me, and before I knew it, /tmp
was so full of sessions files, I could not easily delete them with
"rm /tmp/cgisess*". Being able to delete /tmp/cgisess/ should be a
bit easier.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Test plan
1/ enable OpacAddMastheadLibraryPulldown
2/ Defined a group of libraries as searchdomain
and tick 'show in pull down'
3/ At the OPAC, go on the advanced search form, limit by the group of
libraries you have just created.
4/ The group should be selected by default in the dropdown list
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
http://bugs.koha-community.org/show_bug.cgi?id=15294
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This is similar to bug 12877
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
While this is missing a detailed test plan, what I did to test was
1/ Login to koha .. it works
2/ Apply patch
3/ Login to koha .. it still works, no regressions. I can't test the
shibboleth part but it doesnt break anything else so I'm happy to sign
off
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
We had to implement this fix for one of our customers using Shibboleth.
Can verify that it fixes the issue (which, incidentally, breaks
stage-marc-import since that depends on a constant sessionID).
Passing QA (verified with QA tools). Thanks, Martin!
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine does a lot a processing and should only be called when
necessary.
In the get_template_and_user subroutine (so called from any pages of
Koha), it is call to pass the branchcode, title, firstname, surname and
borrowernumber values for the logged in user.
This subroutine calls GetMemberAccountRecords which retrieve the items
infos for all accountlines entries of the logged in user.
On members/members.pl, let's say you have 74 entries in the accountlines
tables, the page will execute 115 SELECT instead of 35 if you don't have any
accountlines entries.
With this patch, the number of SELECT is always 31.
To test this patch you should have technical skills to know what to do.
Note that USER_INFO was an array of... 1 element. Now it's a hashref.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch enable use of IntranetUserCss on staff client
login page.
To test:
1) Add something to IntranetUserCSS to modify login page,
for example
#login h1 a {
height:30px;
}
2) Logout from staff client, no changes on login page.
3) Apply the patch
4) Reload, now logo is cut in half :)
Bonus) Login again an try changing image, add
#login h1 {
background: url(http://example.com/img/other-logo.png) no-repeat top center;
}
and fix height. Logout and check
This also affects 3.20 and perhaps earlier versions.
Re-upload to fix examples
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The SCO user should only be allowed to access to the SCO module.
This patch make the session ends if the user tries to access another
page after the SCO module.
Test plan:
0/ Configure the SCO module correctly
1/ Go on the sco main page (sco/sco-main.pl)
2/ Try to go somewhere else: you should not be logged in
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Extends login screen to pass along #hash
* Adds JSONP support to C4::Service
* Extends humanmsg to allow per-message classes
* Adds proper charset to results of svc/bib
Test plan:
1. C4/Auth.pm and .../intranet/.../auth.tt: verify that login/usage
works as expected, despite the change to pass on the fragment (...#blah)
from the URL.
2. C4/Service.pm and humanmsg.js: verify that editing system
preferences (the main user of these modules) works correctly despite
updates.
3. svc/bib: verify that records can be correctly downloaded with the
change of character set. This can be done in a Firebug/Chrome Devtools
console by running `$.get('/cgi-bin/koha/svc/bib/1')` and inspecting the
results (possibly replacing 1 with a different valid biblionumber).
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
These 2 fields are not used anymore, but we want to keep them anyway.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
CGI->url does not return the correct url on install using packages.
Test plan:
1/ Try to reproduce the bug from the description of bug 15005.
You should be able to login to the intranet and the OPAC
2/ Send a basket and a list from the intranet and the OPAC.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Mubassir Ahsan asked on the Koha mailing list:
Is there any option to set Saturday as the first day of
the week? Please help me.
CalendarFirstDayOfWeek is currently either Sunday|Monday.
By converting it to 0|1|2|3|4|5|6
(Sunday, Monday, ..., Saturday), we can allow any day of the
week to be the first day of the week in the date picker.
TEST PLAN
---------
1) Backup DB
2) In mysql:
> DELETE FROM systempreferences;
> SOURCE .../installer/data/mysql/sysprefs.sql
> SELECT variable,value FROM systempreferences;
-- It should say 'CalendarFirstDayOfWeek' and '0'
May say '1' if you are using Norwegian.
3) Restore your DB
4) .../installer/data/mysql/updatedatabase.pl
-- If your previous value for 'CalendarFirstDayOfWeek' was
'Sunday', it should be '0'. For 'Monday', it should be '1'.
5) Test an installation with 'de-DE' as the language.
-- The default value should be '1'.
6) Test an installation with 'nb-NO' as the language.
-- The default value should be '1'.
7) In the staff client, confirm that any day of the week is
available in the I18N/L10N system preferences for the
CalendarFirstDayOfWeek dropdown.
-- I'm aware they aren't in order, but I'm after
functionality, not finesse.
8) In another tab, go to a staff place that has a datepicker.
For example, Home -> Tools -> Inventory/stocktaking
9) For each possible value in the CalendarFirstDayOfWeek,
go to the other tab, refresh the page after updating the
system preference, and click the datepicker icon.
-- The date picker should then start on the selected
day of the week.
10) Log into OPAC
-- This may require setting: opacuserlogin to 'Allow'.
11) Click the personal details tab on the left.
12) There is a date picker for the date of birth.
-- The date picker should then start on the selected
day of the week.
13) Run koha QA test tools.
NOTE: not an atomic update, since this is an old patch.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
In Bug 14408 first patch, the regexp used needs an escape on dot and does not need an ending "?"
Test plan :
- prove t/db_dependent/Auth.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Counter counter patch
Please test well, including with the null byte %00, this uses a whitelisting to only allow files ending with .tt
and not allowing ../etc
Note the previous patch tries to protect against /etc/passwd
but //etc/passwd is now vulnerable. I do think a whitelist is safer than trying to do a blacklist
/cgi-bin/koha/svc/virtualshelves/search
/cgi-bin/koha/svc/members/search
Are vulnerable
To test:
1/ Hit /cgi-bin/koha/svc/members/search?template_path=members/tables/members_results.tt
Notice you get a valid JSON response
2/ Hit
/search?template_path=..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2fetc%2fpasswd
(You may have add more ..%2f or remove them to get the correct path)
Notice you can see the contents of the /etc/passwd file
3/ Hit
/cgi-bin/koha/svc/members/search?template_path=test%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2fetc%2fpasswd
4/ Apply patch
5/ Hit the first url again, notice it still works
6/ Hit the second url notice it now errors with a file not found
7/ Hit the third url notice it now errors with a file not found
Repeat for the other script also
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Most of them were found and fixed using codespell.
Fix also some related grammar issues.
In C4/Serials.pm a variable was renamed to make future codespelling
checks easier.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
http://bugs.koha-community.org/show_bug.cgi?id=14383
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This pref does not work at all, the interface let the user choose to
list all suggestions, but whatever he chooses the suggestion list is the
same.
This patch cleans a bit the suggestedby management.
There are a lot of cases to test, because linked to 2 prefs:
AnonSuggestions and OPACViewOthersSuggestions.
1/ AnonSuggestions = 0 and OPACViewOthersSuggestions = 0
- A non logged in user is not able to make a suggestion.
- A logged in user is not able to see suggestions made by someone else.
2/ AnonSuggestions = 0 and OPACViewOthersSuggestions = 1
- A non logged in user is not able to make a suggestion.
- A logged in user is able to see suggestions made by someone else.
3/ AnonSuggestions = 1 and OPACViewOthersSuggestions = 0
- A non logged in user is able to make a suggestion.
The suggestedby field will be filled with the AnonymousPatron pref value.
He is not able to see suggestions, even the ones made by AnonymousPatron.
- A logged in user is not able to see suggestions made by someone else.
4/ AnonSuggestions = 1 and OPACViewOthersSuggestions = 1
- A non logged in user is able to make a suggestion.
He is able to see all suggestions.
- A logged in user is able to see suggestions made by someone else.
In all cases a logged in user should be able to search for suggestions
(except if he is not able to see them).
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
All use cases tested, work as expected
No errors
Only comment is perhaps (in the future) a gracefull failure
when AnonymousPatron is not set, or has '0' value
Message is DBIx::Class::ResultSet::create(): Column 'suggestedby' cannot be null at ...
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The borrow permission was used but uselessly.
For instance, at the opac, the flagsrequired parameter was set to
'borrow' but the 'authnotrequired' was set also (which means no auth
required).
At the end, this permission was used at only 1 place: for the basket,
intranet side.
This can be replaced with the catalogue permission (which is used to
search).
Test plan:
1/ Confirm that you are able to show/download/sent the cart (intranet side)
with the catalogue permission.
2/ At the OPAC, you should be able to access the same pages as before
with any other permissions.
Concretely it is quite difficult to test this patch, you should have a
look at the code.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce:
- Allow commenting in OPAC (Syspref reviewson)
- Log in to OPAC
- Do a search with many results
- Click on a biblio in result list
- Verify that you can browse the results in detail view ("Browse results")
- Repeat teh search above
- Click on the same biblio as above
- Add a comment (Tab "Comments")
- Close commenting window
- Click on "Next" in result browser
Result: The next biblio is displayed, but result browser has disappeared.
To test:
- Apply patch
- Try to reproduce issue above, verify that result browser does no longer disappear
AMended to remove whitespace chars. / MV
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug & solution checked, works well. No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
First, it is strongly recommended to set the OPACBaseURL. But
this patch allows the inclusion of the protocol and not just
a site.
Next, C4/Auth now puts OPACBaseURL into the template parameters
regardless of OPAC or Staff clients. t/db_dependent/Auth.t was
tweaked to add a check for confirming that get_template_and_user
adds OPACBaseURL to both OPAC and Staff templates.
In the staff client, once the OPACBaseURL is set, you get a nice
OPAC View link when viewing a biblio's detail. It should reflect
the protocol used now.
Hard coded 'http://' strings were removed from the
sample_notices.sql files. This is what required also updating
the letters table in the updatedatabase.pl script.
The explanation text in the sysprefs.sql needed updating too to
reflect the inclusion of the protocol. And this was the other
update done in the updatedatabase.pl script. The opac.pref file
was similarly changed as well.
catalogue/detail.pl had no need to pass a custom OpacUrl value,
since C4/Auth passes the required OPACBaseURL, so it and the
corresponding template were modified.
Both the MARC21 and NORMARC intranet details files had 'http://'
hard coded in them. This was removed.
Both the bootstrap and prog theme opac-detail template had a
protocol parameter that was used. The logic for the parameter
was not removed, because it is used extensively in one template.
Perhaps it should be used to simplify the other. However, the
calculated current_url parameter had references to the protocol
removed, because of the changes to OPACBaseURL.
opac/opac-shareshelf.pl had a hard coded 'http://' which was
removed.
t/db_dependent/Auth_with_cas.t had 'http://' added to the value
set for OPACBaseURL.
In virtualshelves/sendshelf.pl explicit code which sent the
OPACBaseURL preference was removed, since C4/Auth sends it all
the time now.
C4::Context::set_preference was tweaked to ensure that
OPACBaseURL would always start with http.
t/db_dependent/Context.t was tweaked to specifically test this.
The Shibboleth authentication needs OPACBaseURL set, and that
it be https protocol. The _get_uri routine was tweaked to always
pass back https:// as the protocol on the OPACBaseURL.
t/Auth_with_shibboleth.t was tweaked to specifically test the
changes.
TEST PLAN
---------
This is not an easy patch to test. Difficulties include:
- configuring Koha to run under https
(tweaking apache2 isn't so hard, just tricky)
- configuring Koha to run OPAC and Staff with Plak
(since code with comments about plak were sliced out)
- configuring Koha to use CAS
(may be requires for the CAS test)
1) Apply patch
2) Make sure OPACBaseURL is set without the protocol included.
UPDATEDATABASE
3) back up your DB
4) ./installer/data/mysql/updatedatabase.pl
-- It should run without errors.
5) Look up the OPACBaseURL system preference in the staff
client
-- It should have http:// prepended.
6) Run the mysqlclient from your koha git directory
USE koha_library;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- There should be no prepended http:// on the
<<OPACBaseURL>>.
7) restore your DB
8) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
AUTH
9) Call up staff client.
10) Call up OPAC.
-- C4/Auth.pm doesn't barf.
11) Call up Plack staff client
12) Call up Plack OPAC.
-- C4/Auth.pm doesn't barf.
13) prove -v t/db_dependent/Auth.t
CONTEXT
14) Home -> Koha administration -> Global System Preferences
-> OPAC
15) Modify and save OPACBaseURL to not have http:// or https://
on it.
-- It should be modified to include http://
16) Modify and save another system preference.
-- It should save normally
17) prove -v t/db_dependent/Context.t
CATALOGUE/DETAIL (tt & pl)
18) Confirm the OPACBaseURL is set
19) Navigate to any biblio details in the staff client
-- There should be a "OPAC view" link which has the
correct http:// or https:// in it.
SQL (sample notices and sysprefs)
20) Run the mysqlclient from your koha git directory
USE koha_library;
DELETE FROM letter;
source installer/data/mysql/de-DE/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/en/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/nb-NO/1-Obligatorisk/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/es-ES/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/fr-FR/1-Obligatoire/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/it-IT/necessari/notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/pl-PL/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/ru-RU/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/uk-UA/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- Each of the selects should should lines that have
<<OPACBaseURL>> starting them, but no hard-coded http://
DELETE FROM systempreferences;
source installer/data/mysql/sysprefs.sql;
SELECT * FROM systempreferences WHERE variable='OPACBaseURL';
-- The explanation should reflect the new explanation.
QUIT
21) restore your DB
22) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
SLIM2INTRANETDETAIL
23) Set 'XSLTDetailsDisplay' system preference to default.
24) Set 'marcflavour' system preference to MARC21.
25) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
26) Set 'marcflavour' system preference to NORMARC.
27) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
OPAC-DETAIL
28) Set 'opacthemes' to bootstrap.
29) Set 'SocialNetworks' to enabled.
30) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
31) Set 'opacthemes' to prog.
32) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
AUTH_WITH_CAS
33) prove -v t/db_dependent/Auth_with_cas.t
OPAC-SHARESHELF
34) Set 'OpacAllowSharingPrivateLists' to allow.
35) In OPAC, 'Save to Lists' a search result.
36) Save it to a new private list.
37) Click the Lists button, and select the new list.
38) Click the Share button.
AUTH_WITH_SHIBBOLETH
39) prove -v t/Auth_with_shibboleth.t
-- needs to be tests on Debian, because I can't get
the Test::DBIx::Class installed in Ubuntu. :(
Rebased again on kohadevbox...
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
TEST PLAN
---------
1) $ prove t/db_dependent/Auth.t
-- warnings
2) Apply this patch
3) $ prove t/db_dependent/Auth.t
-- only one specific type of warning
4) Apply bug 5010 patch
5) $ prove t/db_dependent/Auth.t
-- noisy is eliminated
6) koha qa test tools.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
With patch only one warn
With 5010 no more warns
No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
Same as previous patch for opacuserjs
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Worked before and after updatedatabase.pl, though after
is less confusing to the programmer unaware of case-insensitivity.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To match IntranetUserCSS, intranetuserjs should be renamed
IntranetUserJS.
Test plan:
1/ Be sure there is no occurrence of intranetuserjs
2/ Confirm the pref still works as before
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Worked before and after updatedatabase.pl, though after
is less confusing to the person unaware of case insensitivity.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This code causes the installer to re-check dependencies during the
upgrade process.
Test Plan
---------
1) Log in to staff client
2) Koha Administration -> Global system preferences -> Local
3) Change Version to previous version -- DO NOT HIT SAVE YET!
4) In command line: sudo apt-get purge libpdf-fromhtml-perl
NOTE: This could be ANY required library. I chose
PDF::FromHTML, because it has been a thorn in my side.
5) NOW! Hit the 'Save' button.
6) Log in, etc. etc...
-- Blows up on redirect to log in.
7) In command line, add it back (I had to compile my own so,
I used sudo dpkg -i /path/to/libpdf-fromhtml-perl...)
8) Apply patch
9) Edit the C4/Installer/PerlDependencies.pm to make
PDF::FromHTML required. See also bug 14103.
10) Log in to staff client
11) Koha Administration -> Global system preferences -> Local
12) Change Version to previous version -- DO NOT HIT SAVE YET!
13) In command line: sudo apt-get purge libpdf-fromhtml-perl
14) NOW! Hit the 'Save' button.
15) Log in, etc. etc...
16) Once warned you are missing it, add it back at the command line.
17) Click 'Recheck'
-- Proceeds as expected now.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It will permit not to run another perl interpreter.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds:
- links to the new pages.
- syspref description
- links on the main page (intranet)
- the DISCHARGE type for debarment
Signed-off-by: Lucie <lucie.rousseaux@dracenie.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch allows to use CAS authentication for intranet login.
It works exactly the same as the OPAC login, except that the
staffClientBaseURL syspref must be set for intranet login
(like OPACBaseURL must be set for OPAC login).
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In C4::Auth there is a use C4::VirtualShelves.
Virtualshelves are displayed in all OPAC pages, but not in intranet.
For performance, we should move this into a require only for opac pages.
This patch adds a condition to fetch virtualshelves only if opac and moves the dependancy on C4::VirtualShelves into require calls.
On my desktop, I have those compilation times for C4/Auth.pm :
- Without patch : 0,41 seconds
- With patch : 0,22 seconds
This performance improvement is very usefull for pages that only use a few as dependancy, like errors/404.pl
Test plan :
- Be sure there are some public lists
- Apply patch
- Go to opac (not logged-in)
- Click on "Lists"
- Check you see the public lists
- Login with a user
- Be sure this user has some private lists
- Click on "Lists"
- Check you see the public and private lists
- Logout
- Go to /cgi-bin/koha/opac-reserve.pl
- You see the loggin page
- Click on "Lists"
- Check you see the public lists
- Go to intranet
- Check you can loggin
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan (from comment #1)
1) Apply this patch
2) Run updatedatabase.pl
3) Verify the system pref OpacColorStyleSheet still works
i.e. no change should be noted
Additionally, I changed the path to an other stylesheet and verified that it worked.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described and no more occurences of opaccolorstylesheet were found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If the user is already logged-in, do not trigger CAS authentication
even if there is a ticket in the parameters.
1) Authenticate to the OPAC through CAS.
2) Once redirected to your account, hit F5 or the refresh button of your browser.
3) You're logged out.
Signed-off-by: Koha Team Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Luce Barbey <luce.barbey@cirad.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Added sign of lines according to bug.
Works as described, small change.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
C4::Reserves:
* Added OnShelfHoldsAllowed() to check issuingrules
* Added OPACItemHoldsAllowed() to check issuingrules
* IsAvailableForItemLevelRequest() changed interface, now takes
$item_record,$borrower_record; calls OnShelfHoldsAllowed()
opac/opac-reserve.pl and opac/opac-search.pl:
* rewrote hold allowed rule to use OPACItemHoldsAllowed()
* also use OnShelfHoldsAllowed() through
* IsAvailableForItemLevelRequest()
templates:
* Removed AllowOnShelfHolds and OPACItemHolds global flags, they now
only have meaning per item type
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
I have tested this patch left, right and upside down for the last
several months. All tests have passed.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There were multiple calling conventions for C4::Context's
set_userenv routine. So the following commands were used to
find discrepancies:
grep "::set_userenv" `find .`
grep "\->set_userenv" `find .`
The first grep demonstrated that the smaller change is from
:: to -> as only C4/Auth.pm, installer/InstallAuth.pm, and
t/db_dependent/Circulation.t would need to be modified. This
patch corrects C4::Context's set_userenv routine to be object
call based (use ->) by using a shift to ignore the first
parameter, and modify the three files found with :: calls.
As the result of trying to roll a distribution,
t/Circulation_barcodedecode.t was discovered to be faulty. The
cause being incorrect parameters! This was hidden when there
was no shift in the set_userenv routine. However, with its
correction, the test broke.
This led me to read the POD documentation for the function
set_userenv in C4::Context and realize it was outdated as
well. It has been revised to match the current version of
the function.
Then intentionally bad parameters passed to the set_userenv
routine in C4::Context were hunted down. The biggest problems
were missing surnames or branch names.
Rebase required because of shibboleth change in C4/Context.pm
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There was an instance of the pragma missed which meant the the original
patch set didn't actually solve the problem in a large number of cases
This patch adds in the relevant statement.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To Test:
1) Enable the system preference SessionRestrictionByIP
2) Change your system IP. It will not checkout your system IP or signout.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A failed login should not leave the user in a half logged authenticated
state, but rather return them to an anonymouse session as per the
pre-login attempt state.
To replicate error:
1. Try to log in with some nonexisting user id or wrong password in the
OPAC
2. Go directly to /opac-user.pl (e.g., enter it in the browser address
bar, or just click on the "Log in" link)
3. Observe a DBI error displayed on the screen
4. You are now in the "deadloop" of sorts (opac/opac-user.pl refuses to
display the login screen, no matter how many times you try to reload
it); to break the deadloop, one needs to:
- remove session cookie from the browser (or cause the session to
expire in some other way - closing browser window would be probably
enough for that)
- remove offending session on the server (from mysql sessions table,
..)
- log in with proper credentials using some other page (like
opac/opac-main.pl right-side panel), which does not involve
opac/opac-user.pl being called without "userid" CGI parameter.
To test:
1. Test as above, the DBI error should no longer be present
2. Check that search history works across failed and sucessful login
attempts
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Add a missing semicolon to the end of a template variable assignment
line. This patch should not affect operation.
Note: With Bug 13499 we did a non-destructive perltidy, as such we only
affected indenting and whitespace to maintain blame history. However, a
number of minor code issues were also highlighted, in this series of
patches I hope to correct other minor style issues.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Removed an uneeded semicolon from the end of an 'if' block. This should
not affect operation of the script.
Note: With Bug 13499 we did a non-destructive perltidy, as such we only
affected indenting and whitespace to maintain blame history. However, a
number of minor code issues were also highlighted, in this series of
patches I hope to correct other minor style issues.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This tidy should only change whitespace and not line breaks, thus
retaining history.
There are no code changes, and thus there should be no regressions to
test for koha wise.
To test the non-destrcutive nature of the patch, run a 'git blame -w' on
the file before and after the patch. The resulting blame should include
a comparabile history of the file, with only some additional blank
lines being attributed to this commit.
A 'git blame -wM' may also be useful for comparison purposes.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The password should be encoded before hashing.
Test plan:
- Before applying the patch, create a user with utf-8 in password
- apply patches
- try to log in
- change the password
- log out
- try to log in
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds links to "My account" and "My checkouts" to drop down in staff client header.
To test:
Apply patch
Got to drop down of logged in user (top right)
See new links to "My account" and "My checkout" (above "Log out")
Test the links.
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
Works as advertised. The options are not displayed when you are logged
in as the db/admin user.
Added classes "toplinks-myaccount" and "toplink-mycheckouts" to li tags to make it possible to hide them (per Kyle M $
Switching back to "Signd-off" (Hope this is OK becuause it is a tiny string addition)
Marc
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
While testing a bug, warnings in the opac error log were
building up due to a particular line in C4::Auth. After
reviewing the code, it was discovered that removal of the
OpacMainUserBlockMobile system preference created this.
Since the system preference no longer exists, and is not
used, the line was deleted from C4/Auth.pm to prevent this
warning from occuring.
TEST PLAN
----------
1) Go to any OPAC page.
2) Check your opac error log.
-- there should be something about uninitialized values
used in C4/Auth.pm around line 443.
3) Apply the patch
4) Refresh the page.
-- that same error should not be triggered.
5) prove -v t/db_dependent/Auth.t
-- this runs the get_template_and_user function
which had the parameter removed.
6) run the koha qa test tools
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With CCSR now deprecated there is no longer a need for the
OPACMobileUserCSS system preference. This patch removes it.
To test, apply the patch and run updatedatabase. Check that the
preference can no longer be found in system preferences.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
With CCSR having been deprecated there is no longer a use for the
OpacShowLibrariesPulldownMobile system preference. This patch removes
it.
To test, apply the patch and run updatedatabase. Check that the
preference can no longer be found in system preferences.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
- The shibboleth patch introduced an undefined message into the error
logs, when shiboleth is disabled.
Testplan
1. Ensure shibboleth is disabled.
2. Refresh any opac page
3. See 'Use of uninitialized value $ENV{"REMOTE_USER"} in string ne at
/home/koha/kohaclone/C4/Auth.pm line 711.' popup in the opac-error.log
4. Apply patch
5. Refresh opac page
6. Error should no longer appear
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Convert Auth_with_shibboleth to use dbic stanzas.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- A number of issues were highlighted whilst writing sensible unit tests
for this module.
- Removed unnessesary call to context->new();
- Global variables are BAD!
- Croaking is a wimps way out, we should handle errors early and
properly.
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Local fallback was not very well implemented, this patch adds
better handling for such cases allowing clearer failure messages
- This patch also adds the ability to use single sign on via the
top bar menu in the bootstrap theme.
BUG8446, Follow up: Adds perldoc documentation
- Add some documentation to the Auth_with_Shibboleth module
including some guidance as to configuration.
BUG8446, Follow up: Correct filenames to match guidlines
- Moved Auth_with_Shibboleth.pm to Auth_with_shibboleth.pm to match
other files present on the system.
BUG8446, Follow up: Correct paths after file rename
BUG8446, Follow up: Implemented single sign out
- This follow up rebases the code against 3.16+ which managed to break
some of the original logic.
- As a side effect of the rebasing, we've also implemented the single
sign out element. Upon logout, koha will request that the shibboleth
session is destroyed, and then clear the local koha session upon
return to koha. Due to the nature of shibboleth however, you will
only truly be signed out of the IdP if they properly support Single
Sign Out (which many do not). As a consequence, although you may
appear to be logged out in koha, you might find that upon clicking
'login' the IdP does NOT request your login details again, but instead
logs you silently back into your koha session. This is NOT a koha bug,
but a shibboleth implementation issue that is well known.
BUG8446, Follow up: Fixed bootstrap login via modal
- The bootstrap theme enable login from any opac page via modal. To
enable this with shibboleth we had to make some template parameters
globally accessible when shibboleth is enabled.
BUG8446, Follow up: Add template rules for Shibboleth and CAS
- Add template rules so that CAS and Shibboleth can coexist.
BUG8446, Follow up: Added default config to config file
BUG8446, Follow up: Embellished perldoc documentation
- Updated perldoc to correct detail about configuring shibboleth
authentication.
- Updated perldoc to include subroutines and their respective functions.
BUG8446, Follow up: Enable configuration of match field
- Added clearer, more flexible, configuration of shibboleth attribute to
koha borrower field matching for authentication
- Correcting of documentation to make it more clear to the current
implementation
- Minor refactoring of code to reduce some code duplication
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Use the shibbolethAuthentication syspref to enable Shibboleth authentication
- Configure the shibbolethLoginAttribute to specify which shibboleth user
attribute matches the koha login
- Make sure the OPACBaseURL is correctly set
BUG8446, Follow-up: Adds Shibboleth authentication
- Fix logout bug: shibboleth logout now occurs only when
the session is a shibboleth one.
- Do some refactoring: getting shibboleth username is now
done in C4::Auth_with_Shibboleth.pm (get_login_shib function)
BUG8446, Follow-up: Adds Shibboleth authentication
- Adds redirect to opac after logout
BUG8446, Follow-up: Adds Shibboleth authentication
- Shibboleth is not compatible with basic http authentication
in C4/Auth.pm. This patch fixes that.
BUG8446, Follow-up: Adds Shibboleth authentication
- Use ENV{'SERVER_NAME'} instead of syspref OpacBaseURL in order to work with
multiple vhosts.
BUG8446, Follow-up: Adds Shibboleth authentication
- Adds missing protocol for $ENV{'SERVER_NAME'}
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jesse Weaver <pianohacker@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with the feide idp.
- LDAP login and logout are working
- local login/logout are still working
- CAS login/logout are still working
Instructions for setup can be found on the wiki:
http://wiki.koha-community.org/wiki/Shibboleth_Configuration
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It is kosher now to use the Koha template toolkit plugin for retrieving
system preferences values. This followup does that.
It also changes the class for ids, for people considering this patch
introduces too much noise on the home screen being able to control
its visibility.
Regards
To+
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Enable staff to setting a text for OPAC user/pass information
Modified:
C4/Auth.pm
koha-tmpl/opac-tmpl/bootstrap/en/includes/usermenu.inc -add a text to the popup login page
koha-tmpl/opac-tmpl/bootstrap/en/includes/opac-main.tt -add a text to the main login page
Testing:
I Apply the patch
0) Search NoLoginInstructions preference
1) Add/modify a text
2) Open OPAC main page
3) Validate the text added under Login button
4) Click in "Log in to your account" link
5) Validate the text added under input password (popup)
Sponsored-by: CCSR ( http://www.ccsr.qc.ca )
Patch behaves as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch covers LDAP auth_by_bind configuration so that wrong
LDAP password will return -1 to C4::Auth so we can abort local auth
and prevent users logging in with stale database passwords.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
http://bugs.koha-community.org/show_bug.cgi?id=8148
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
CCSR having been deprecated there is no longer a use for the
OpacShowFiltersPulldownMobile system preference. This patch removes
it.
To test, apply the patch and run updatedatabase. Check that the
preference can no longer be found in system preferences.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The opacsmallimage system preference is unused in the bootstrap theme.
It can be removed now that prog and ccsr are deprecated. This patch does
so.
To test, apply the patch and run updatedatabase. Confirm that the OPAC
works properly and the preference can no longer be found.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch changes how the OPACBaseURL parameter gets set in the subroutine
get_template_and_user in Auth.pm.
Currently, it's being set by the $ENV{'SERVER_NAME'} variable. In many
cases, this will probably match the URL that the user uses to access a
page. However, this causes problems with reverse proxies.
There are ways to compensate for proxy servers (such as inspecting
other variables set by the web server), but such a solution seems
a bit convoluted...especially since we already use the system preference
OPACBaseURL in many other parts of Koha.
We probably shouldn't be passing OPACBaseURL from Auth.pm at all, and
instead use the Koha TT plugin and using_https param to determine
protocol. However, that's outside the scope of this bug/patch.
This patch is just meant to fix an existing bug.
I did leave the $ENV{'SERVER_NAME'} as a full back if OPACBaseURL isn't
set, but that's it.
_TEST PLAN_
Before applying:
1) Clear your OPACBaseURL preference
2) Perform a search in the OPAC
3) Click on or hover over the orange RSS icon
4) Note that the URL used for the RSS links is either:
a) The same URL you used to access Koha (no reverse proxy)
b) The ServerName from your Koha apache conf which isn't the
same URL you used to access Koha (reverse proxy)
5) Add an OPACBaseURL that isn't the same as the actual OPAC URL
6) Note that the OPACBaseURL system preference has no effect here
After applying the patch:
7) Refresh the page
8) Note that the URL you see now is actually the OPACBaseURL system
preference that you set
9) Clear your OPACBaseURL system preference
10) Refresh your search page
11) Note that the URL has reverted back to the URL that you saw before
(either the original Koha site URL or the Koha ServerName defined
in Apache and not the URL of the proxy)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If flagsrequired is set, authnotrequired should be 0.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
Verify that pages in the OPAC and staff interface display correctly.
Note that there are cases where 'authnotrequired' was not passed
at all to get_template_and_user, so there may be pages that start
requiring authentication. Whether that is correct or not depends
on context.
Follow up patches are to remove all the unnessecary setting of this
value, so that the only places we set are when we do want
authnotrequired=1
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch implements 2 suggestions on comment #3
- Prevents creation of a new user with same userid
of database user
- When checking password, if userid matches database user,
only check against pass on config file
To test:
1. Create a new user with same login as database user
any password different from real db user
2. Check that you can login on staff using this user/pass
and you are superlibrarian
3. Apply the patch
4. Login again using new pass, it must fail
5. Login again using db pass, you are now superuser,
but system does not warn you :( No problem, that's
for having one borrower with that login
6. Delete user with same login as db user
7. Try to create one again as in 1, system must return
an error of duplicate login!
8. Check for no regressions on user/pass authentication
Resubmited, has an error
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
This works nicely and as described.
Also editing the former 'superuser' will force you to
change the userid in order to save any other change.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since the addition of search groups to Koha, the branch limiting
parameter in multiple PAC by URL support should also support
limiting by these search groups. This patch adds this ability.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10029 tries to fix the use of URL parameters in CAS authentication.
But is does not work.
The full URL must be used in all methods of C4::Auth_with_cas.
Also, in checkpw_cas(), the 'ticket' parameter must be removed to find
the original URL.
This patch removes the 'ticket' parameter from query before calling
checkpw_cas() since the ticket is passed as method arguemnt.
In C4::Auth_with_cas, many methods use the same code to get the CAS
handler and the service URI. This patch adds a private method
_get_cas_and_service() to do the job.
Test plan:
- Enable CAS
- Go to opac without been logged-in
- Try to place hold on a record
=> You get to /cgi-bin/koha/opac-reserve.pl?biblionumber=XXX showing
authentication page
=> Check that CAS link contains query param "biblionumber"
- Click on CAS link and log in
=> Check you return well logged-in to reserve page with biblionumber
param
- Check CAS loggout
- Check Proxy CAS auth
Signed-off-by: Koha team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests in t, xt, and t/db_dependent/Auth.t.
Also passes QA script.
As I have no working CAS server, I focused on regression testing:
Activated Persona and casAuthentication.
- Verified normal login against database still works.
- Verified Persona login works.
Note: With Persona you are always forwarded to the patron
account - so you have to search for the record again before
you can place a hold.
- Verified that the CAS URL contains the biblionumber when
logging in while placing a hold.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Retested 2014-04-12
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Also store interface (intranet, opac) in context to not have to pass it
as parameter.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on last patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When using Plack, the https method returns 'OFF'.
We have to test this value before sending the value to templates.
Test plan:
1/ Fill your OPACBaseUrl
2/ Configure apache for using http
3/ Check the social networks links (should be http://OPACBaseUrl)
4/ Launch Plack
5/ Check the social networks link (should be http://OPACBaseUrl)
6/ Stop Plack
7/ Configure apache for using https
sudo openssl req -x509 -nodes -days 365 -newkey rsa:1024 -out
/etc/apache2/server.crt -keyout /etc/apache2/server.key
and add in you virtualhost (with :443)
SSLEngine on
SSLCertificateFile /etc/apache2/server.crt
SSLCertificateKeyFile /etc/apache2/server.key
a2enmod ssl
service apache2 restart
8/ Check the social networks links (should be https://OPACBaseUrl)
FIXME: Under Plack, with ssl actived, the CGI->https() method always
returns 'OFF'.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Like OPAC, the search history is now available for intranet. This
is controlled by the EnableSearchHistory system preference.
Test plan:
1/ Switch on the 'EnableSearchHistory' syspref.
3/ Launch some biblio and authority searches.
4/ Go on your search history page (top right, under "Set library").
5/ Check that all yours searches are displayed.
6/ Click on some links and check that results are consistent.
7/ Delete your biblio history searches.
8/ Delete your authority searches history searches.
9/ Launch some biblio and authority searches
10/ Play with the 4 delete links (current / previous and biblio /
authority).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This ensures that if an anonymous session is converted to a logged-in
session, that search history times from the anonymous session get
stored corectly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Like biblio, this feature provides an authority search history.
This history is available for connected and disconnected user.
If the user is not logged in Koha, the history is stored in an
anonymous user sessin.
The search history feature is now factorized in a new module.
This patch adds:
- 1 new db field search_history.type. It permits to distinguish the
search type (biblio or authority).
- 1 new module C4::Search::History. It deals with 2 different storages:
DB or cookie
- 2 new UT files: t/Search/History.t and t/db_dependent/Search/History.t
- 1 new behavior: the 'Search history' link (on the top-right corner of
the screen) is always displayed.
Test plan:
1/ Switch on the 'EnableOpacSearchHistory' syspref.
2/ Go on the opac and log out.
3/ Launch some biblio and authority searches.
4/ Go on your search history page.
5/ Check that all yours searches are displayed.
6/ Click on some links and check that results are consistent.
7/ Delete your biblio history searches.
8/ Delete your authority searches history searches.
9/ Launch some biblio and authority searches
10/ Delete all your history (cross on the top-right corner)
11/ Check that all your history search is empty.
12/ Launch some biblio and authority searches.
13/ Login to your account.
14/ Check that all previous searches are displayed.
15/ Launch some biblio and authority searches.
16/ Check that these previous searches are displayed under "Current
session".
17/ Play with the 4 delete links (current / previous and biblio /
authority).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All patches together pass QA script and tests.
Also, new tests in t/db_dependent/ pass.
Tested in all 4 OPAC themes, being logged in and anonymous.
Anonymous search history will be appended to personal search
history after logging in.
Also verified that cleanup_database still purges search history,
now also including the authority searchs.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch uses the TT helper function Koha.Preference() to
retrieve the value of NoLoginInstructions rather than passing
it to all templates as a template variable.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
On a failed login, the default message is harcorded into opac-auth.tt.
It would be preferable to allow for a preference to override that message (for example: ...Please bring an ID to t
The changes modify
-opac-auth.tt to allow for custom value
-admin/preferences/opac.pref to add it to the preferences with a description
-C4/Auth.pm for the loading of the preference
-sysprefs.sql
-updatedatabase.pl
TESTING
1) in OPAC, logged out, try login in by entering no or wrong credentials. Acknowledge the "Don't have a p
2) Apply the patch
3) Regression Test: Redo step 1. Same (default) message should appear.
4) Log in to intranet,
- select NoLoginInstructions in system preferences.
- Enter new (xml) message. Possible:
<h5>Welcome to Koha, please bring your passport to the front office</h5>
- and save
5) refresh the OPAC, try login again with invalid credentials. The new message should appear.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
This patch makes sure that the search history from an
anonymous session is cleared from the session after a user
logs in (and the session history is saved to that user's
record in the database). This fixes a problem where the
search history from the session got repeatedly added to the
database each time the user did something while logged
into the OPAC.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This is recommended in CGI::Session documentation.
Signed-off-by: Charlene Criton <charlene.criton@univ-lyon2.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- Remove unit tests for ParseSearchHistoryCookie, which doesn't exist
anymore
- Add unit tests for ParseSearchHistorySession and
SetSearchHistorySession
- Remove/Modify comments about search history cookie
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Tests fixed and moved, and comments tidied up
Signed-off-by: Charlene Criton <charlene.criton@univ-lyon2.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Storing search history into cookie can cause problems, due to the size
limitation of 4KB.
The solution here is to store search history into the CGI::Session
object, so there is no size limitation (but anonymous search history
still remember up to 15 requests max.)
Test plan:
- Go to OPAC in anonymous mode.
- Check that the "Search history" link is *not* shown in the top right
corner of the page
- Make some searches on /cgi-bin/koha/opac-search.pl
- The "Search history" link should appear. Click.
- Your search history should be displayed.
- Try to log in with invalid username/password
- Go back to search history, it's still there
- Now log in with valid username/password
- Your anonymous search history should be saved into your own search
history.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Restoring original sign offs and comments below
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors
Well, search history saving is similar before and after patch.
i.e. anonmymous search is saved when user logs in, but cookie
KohaOpacRecentSearches is empty.
Shows current an previous session searches
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
All tests and QA script pass, works as described.
Signed-off-by: Charlene Criton <charlene.criton@univ-lyon2.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This gets rid of some more warnings.
It also corrects a noisy ne condition.
$userid = $retuserid if ( $retuserid ne '');
became
$userid = $retuserid if ( $retuserid );
It also integrates Srdjan Jankovic's patch with Petter Goksoyrsen's
patch, while correcting the problems found.
This includes:
my $q_userid = $query->param('userid') // '';
along with:
my $s_userid = '';
and:
my $s_userid = $session->param('id') // '';
Indentation does not reflect actual scoping.
A missing system preference would have triggered a ubiquitous
undef compare check failure message. This makes the flooding
message more useful, so as to help correct it.
The change to accomplish this was:
my $pki_field = C4::Context->preference('AllowPKIAuth');
if (!defined($pki_field)) {
print STDERR "Error: Missing AllowPKIAuth System Preference!\n";
$pki_field = 'None';
}
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
During login at the Staff interface you get warnings in the logs
regarding an uninitialized value for the $pki_field variable.
To test:
- tail -f /path/to/your-intranet-logs
- Point your browser to your staff login page
- Login
- Three warnings are showed
- Apply the patch
- Log out
- Log in
- No new warnings, and you can still log in.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com>
Followed test plan; it works as advertised.
Also works when I deleted AllowPKIAuth system pref.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
A "busc" param is cleared if the template name is not opac-.*detail.tt.
So if a user adds a biblio to a list, he cannot continue to browse
results.
Test plan:
- launch a search at the OPAC (opac-search.pl).
- click on a result and browse results (using previous/next links).
- a title attract your attention and you add it to a list
("Save to yours lists" link on the right).
- save the list.
- browse again results.
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested according to test plan, also checked some other pages and actions
accessible from the detail page.
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In the serial module, we want to hide serials from others libraries.
However, to permit central serials manage, this patch introduces a
new permission, 'superserials'. If a staff member has this permission,
that person can override the restriction.
Test plan:
- Switch on the IndependantBranches syspref
- Add the permission 'superserials' for a patron and test you can
navigate and see all serials
- Remove this permission and test you cannot manage/view subscriptions
from others libraries
Signed-off-by: Frederic Durand <frederic.durand@unilim.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
These variables still need to be exported to the template by default for
the 'prog' OPAC template to work correctly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The goal of this theme is to provide a fully-responsive OPAC which
offers a high level of functionality across multiple devices with varied
viewport sizes. Its style is based on the CCSR theme, with elements of
the Bootstrap framework providing default styling of buttons, menus,
modals, etc.
The Bootstrap grid is used everywhere, but Bootstrap's default
responsive breakpoints have been expanded to allow for better
flexibility for our needs.
All non-translation-depended files are in the root directory of this new
theme:
css, images, itemtypeimg, js, less, and lib. Languages.pm has been
modified to ignore the new directories when parsing the theme language
directories.
This theme introduces the use of LESS (http://lesscss.org/) to build
CSS. Three LESS files can be found in the "less" directory: mixins.less,
opac.less, and responsive.less. These three files are compiled into one
CSS file for production: opac.css. "Base" theme styles are found in
opac.less. A few "mixins" (http://lesscss.org/#-mixins) are found in
mixins.less. Any CSS which is conditional on specific media queries is
found in responsive.less.
At the template level some general sturctural changes have been made.
For the most part JavaScript is now at the end of each template as is
recommended for performance reasons. JavaScript formerly in
doc-head-close.inc is now in opac-bottom.inc.
In order to be able to maintain this structure and accommodate
page-specific scripts at the same time the use of BLOCK and PROCESS are
added. By default opac-bottom.inc will PROCESS a "jsinclude" block:
[% PROCESS jsinclude %]
Each page template in the theme must contain this block, even if it is
empty:
[% BLOCK jsinclude %][% END %]
Pages which require that page-specific JavaScript be inserted can add it
to the jsinclude block and it will appear correctly at the bottom of the
rendered page.
The same is true for page-specific CSS. Each page contains a cssinclude
block:
[% BLOCK cssinclude %][% END %]
...which is processed in doc-head-close.inc:
[% PROCESS cssinclude %]
Using these methods helps us maintain a strict separation of CSS links
and blocks (at the top of each page) and JavaScript (at the bottom). A
few exceptions are made for some JavaScript which must be processed
sooner: respond.js (https://github.com/scottjehl/Respond, conditionally
applied to Internet Explorer versions < 9 to allow for layout
responsiveness), the _() function required for JS translatability, and
Modernizr (http://modernizr.com/, a script which detects browser
features and allows us to conditionally load JavaScript based on
available features--or lack thereof).
Another new JavaScript dependency in this theme is enquire.js
(http://wicky.nillia.ms/enquire.js/), which lets us trigger JavaScript
events based on viewport size.
I have made an effort to re-indent the templates in a sane way,
eliminating trailing spaces and tabs. However, I have not wrapped lines
at a specific line length. In order to improve template legibility I
have also tried to insert comments indicating the origin of closing tags
like <div> or template directives like [% END %]:
</div> <!-- / .container-fluid -->
[% END # / IF ( OpacBrowseResults && busc ) %]
TESTING
Proper testing of this theme is no easy task: Every template has been
touched. Each page should work reasonable well at a variety of screen
dimensions. Pages should be tested under many conditions which are
controlled by toggling OPAC system preferences on and off. A variety of
devices, platforms, and browsers should be tested.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The move avoids a problem where many modules would gain
a dependency on C4::Auth just because C4::Members needs access
to hash_password().
This patch also adds a couple unit tests for the new password
hashing code.
To test:
[1] Verify that there are no regressions on the test plan for bug
9611.
[2] Verify that t/AuthUtils.t and t/db_dependent/Auth.t pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The current implementation didn't build the cookie array correctly,
yielding login problems in some scenarios.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Passing language=<valid_language_code> as a parameter in any Koha's URL
can be used to set the desired language.
This patch touches
- C4::Templates
- C4::Auth
Adds a new method getlanguagecookie that does exactly that, for use in
get_template_and_user.
Also modifies getlanguage so it checks (a) if there's a 'language'
parameter in the CGI object and (b) checks if its valid and enabled for
the desired interface.
To test:
* Without the patch
- access any koha page
- add ?language=code to the end of the URL (change code for a valid language code
it needs to be installed using perl translate install code, and enabled either for
the staff or opac interface, depending where are you testing)
- Nothing happens with the language parameter
* With the patch
- access any koha page
- add ?language=code (the same as before) and hit enter
- the language should be changed to the one you chose
- if you browse through some links, you will see
koha 'remembers' the language you passed as a parameter
(i.e. the language cookie has been updated).
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Brendan <brendan@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Works very well. No errors.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
More comments on last patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Small patch to make koha-qa happy.
Fixes small POD error
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
What this patch aims to accomplish?
* All new passwords are stored as Bcrypt-hashes
* For password verification:
- If the user was created before this patch was applied then use
MD5 to hash the entered password <-- backwards compatibility
- If the user was created after this patch was applied then use
Bcrypt to hash the entered password
* Any password change made via the staff interface or the OPAC will
be automatically Bcrypt-hashed; this applies to old users whose
passwords were stored as MD5 hashes previously
Test plan:
1) Add new users and check whether their passwords are stored as
Bcrypt hashes or not.
2) To test that authentication works for both old as well as new
users:
a) Login as an existing user whose password is stored as a
MD5 hash
b) Login as an existing user whose password is stored as a
Bcrypt hash
3) In the staff interface, change the password of an existing user
whose password is stored as an MD5 hash
a) Check the new password is stored as a Bcrypt-hash in the database
b) Try to login with the new password
4) In the OPAC, verify that
a) Old user with old pass can change password, new format
b) New user with new pass can change password
c) Old and new user with self-updated pass can login
Whitespace cleanup was contributed by Bernardo Gonzalez Kriegel.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Add validation of the value of the KohaOpacRecentSearches. In
particular, this patch avoids the generation of an internal server
error when the OPAC is presented with an old cookie that uses the
old Storable-based serialization.
This patch also moves parsing of the cookie value into a
new routine in C4::Auth, ParseSearchHistoryCookie, and adds
a test case.
To test (in conjunction with the previous patch):
Exercise the OPAC search history functionality, after
turning on the EnableOpacSearchHistory syspref:
- As an anonymous user, conduct a variety of searches,
including ones that include non-ASCII characters
- Check the search history and verify that all searches
are listed
- Apply this patch and the previous one.
- Do *not* clear the KohaOpacRecentSearches cookie
- Check the search history and verify that no searches
are listed any more
- As an anonymous user, conduct a variety of searches,
including ones that include non-ASCII characters
- Check the search history and verify that all searches
are listed
- Log into the OPAC
- Verify that current and past searches are listed in
search history.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
Exercise the OPAC search history functionality, after
turning on the EnableOpacSearchHistory syspref:
- Clear the KohaOpacRecentSearches cookie
- As an anonymous user, conduct a variety of searches,
including ones that include non-ASCII characters
- Check the search history and verified that all searches
are listed
- Log into the OPAC
- Verify that current and past searches are listed in
search history.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Several system preference variables are unavailable to the OPAC login
template because they are not explicitly enabled for that page. Instead
of adding them to Auth.pm using the old method this patch uses the new
system preference check syntax using the Koha TT plugin.
The following preferences are now checked using this syntax in
masthead.inc:
OpacAddMastheadLibraryPulldown
UseCourseReserves
reviewson
OpacShowRecentComments
In order for the call in masthead.inc to the new plugin to work on all
OPAC pages "[% USE Koha %]" must be added to any template which
includes it (most of them).
Also in this patch: A change to Auth.pm to enable correct display of the
LibraryName in the title of the OPAC login page.
To test, turn on the above system preferences and confirm that the
relevant links appear under the OPAC's main search bar on all pages
including the login page.
Confirm that the text specified in the LibraryName system preference is
shown as the title of the login page.
Confirm that course reserves and comments are displayed correctly on the
biblio detail page.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
I checked both prog and ccsr - all seems well and the links are appearing and disappearing in accordance with the appropriate sysprefs.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If you are not logged in to the OPAC, looking at the login page, and you
click the Lists button to see public lists it says there are none. This
patch corrects Auth.pm so that it loads the list of public lists in this
situation.
To test you must have at least one public list. Make sure you are logged
out of the OPAC and visit the login page (/cgi-bin/koha/opac-user.pl).
Clicking the "Lists" button should show you a list of public shelves.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
works as described, and list button is not shown when opacpublic is disabled.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adjusting to reflect the removal of the branchcode parameter
to GetBranchCategories; also filter on the 'searchdomain'
library group type, as appears to have been intended.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When clicking the login link for opac-user.pl in a multiple branch
scenario the environment variable for OPAC_CSS_OVERRIDE was ignored from
the koha-conf.xml file. It seems like is is working on every page in
the opac except for the login page.
Test Plan:
1) Set up a Koha server with 2 separate catalog configurations
( e.g. opac1.kohatest, opac2.kohatest )
2) Set the OPAC_CSS_OVERRIDE directive for separate css files
in each opac
3) Browse to the opac login page, note the css is not applied
4) Apply this patch
5) Reload the page, note the css is now applied
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Enable IndependantBranches
2) Apply this patch
3) Run updatedatabase.pl
4) Verify that the system preference still functions correctly
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
- the dateformat value is send to all templates (from
C4::Auth::get_template_and_user)
- remove all assignment of dateformat in all .pl files
- Remove "all" occurrences (those I found!) of dateformat_*
From now the only way to get the date format is a string comparaison
(dateformat == "metric")
Checked with the command:
git grep "\(dateformat_us\|dateformat_metric\|dateformat_iso\)" | grep
-v translator
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tested all the datepickers I could find, looks good.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Decodes userid on two places in checkauth of C4/Auth.pm
Test plan:
Include some non-Latin characters in your userid (loginname). Arab, Chinese?
Login into opac and check user page.
Go to staff (no new login), check your login name at various places.
Logout, login via staff.
Do the same.
Go to opac again (no new login), check user page.
Optionally: Remove all your sessions from table. Do a login. Check sessions.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Works as described. No errors.
This patch fixes this problem, but I wonder if
there is a general solution that handle all as utf8.
Tested in opac and staff.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Bug 6554 patched output_html_with_http_headers to encode utf8 data, and Templates.pm to expect utf8 data to be encoded.
(At least) the staff login screen outputs directly to STDOUT (Auth.pm does, WHICH IS WRONG!) and wasn't fixed to do the encoding first.
This patch makes it use output_html_with_http_headers and solves the problem.
Changed 'use' for 'require' as jcamins and marcelr suggested.
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds the ability to add groups to the library select
pulldown on the opac, if it is enabled.
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Go to Administration › Libraries and groups
4) Create a new group, or edit an existing one
5) Ensure the 'Show in search pulldown' checkbox is checked
6) Save the group
7) Enable OpacAddMastheadLibraryPulldown if it is not already enabled
8) Load the OPAC, try the group search from the libraries pulldown menu
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Yes! Now this works, and well.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds support for custom plugins. At the moment the Plugins
feature supports two types of plugins, reports and tools.
Plugins are installed by uploading KPZ ( Koha Plugin Zip )
packages. A KPZ file is just a zip file containing the
perl files, template files, and any other files neccessary
to make the plugin work.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Create the directory /var/lib/koha/plugins
4) Add the lines
<pluginsdir>/var/lib/koha/plugins</pluginsdir>
<enable_plugins>1</enable_plugins>"
to your koha-conf.xml file
5) Add the line
Alias /plugin/ "/var/lib/koha/plugins/"
to your koha-httpd.conf file
6) Restart your webserver
7) Access the plugins system from the "More" pulldown
8) Upload the example plugin file provided here
9) Try it out!
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch removes 'insecure' system preference.
Also removes remaining code that make use of
the preference. It's broken anyway.
Only remains a reference in POD of C4/Boolean.pm
To test:
1) If you like, enable 'insecure' syspref. Broken system.
WARN: be prepared to revert value in database.
2) Apply the patch
3) Run updatedatabase.pl
4) Check that Staff login proceeds as usual.
5) Check that 'insecure' syspref is no more.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: Remove 2 occurrences of insecure (in comment only)
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Removed NoZebra vestiges. This comprises several code blocks that depend on the NoZebra syspref and NZ related functions/methods.
C4::Biblio->
GetNoZebraIndexes
_DelBiblioNoZebra
_AddBiblioNoZebra
C4::Search->
NZgetRecords
NZanalyse
NZoperatorAND
NZoperatorOR
NZoperatorNOT
NZorder
C4::Installer->
set_indexing_engine
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Solve that problem, but now koha-qa complains about tabs
in C4/Context.pm.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tests done:
1) System preference 'Persona' added correctly.
2) Persona off, normal login still possible
3) Persona on, Persona login works
4) Persona logout works
5) normal login still possible
6) normal logout still possible
Persona is off by default and uses the primary email address
from the patron account.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Not introduced by this work but no reason not to clean it
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: no more complains from koha-qa
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
And translation problem in masthead.inc
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Working on Mozilla Persona support (browser id)
This will let a user log into Koha using browser id, if their email
address used matches the email address inside Koha.
Once an assertion is received, we simply need to find the user that
matches that email address, and create a session for them.
opac/svc/login handles this part.
The nice thing about it is, the user doesn't have to do anything, like
linking their account. As long as the email address they are using to
identify themselves in browserid is the same as the one in Koha it
will just work.
This is covered by a systempreference, to allow people to do it, and
is of course totally opt in, it works alongside normal Koha (or any
other method) of login. So only those choosing to use it, need use it
Test Plan
1/ Make sure OPACBaseURL is set correctly
2/ Switch on the Persona syspref
3/ Make a borrower (or edit one) to have the email you plan to use as
the primary email
4/ Click sign in with email, make or use a persona account
5/ Logout
6/ Check you can still login and logout the normal way
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Works great.
It's not browser dependent, but tested with chrome, firefox, opera and safari.
Old an new login system works.
Minor errors, addresed in follow-up.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
- the dateformat value is send to all templates (from
C4::Auth::get_template_and_user)
- remove all assignment of dateformat in all .pl files
- the DHTMLcalendar_dateformat variable is unused
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed conflicts:
- opac/sco/sco-main.pl
- reports/acquisitions_stats.pl
- tools/cleanborrowers.pl
All tests pass, perlcritic problems appeared in some files
before and after these patches were applied.
Checked sorting in following pages:
- acqui/addorderiso2709.tt - list of staged imports in acq
- acqui/histsearch.tt - sorting of dates in acq search result list
- acqui/invoices.tt - billing date in list of invoices in acq
- acqui/lateorders.tt - list of late orders in acq
- acqui/ordered.tt - ordered titles and estimated costs for a fund
- acqui/parcels.tt - receive shipment page
- acqui/spent.tt - received titles and actual costs for a fund
...
- serials-search.tt - subscription search result list
...
- opac/sco/sco-main.tt - due dates in list of checked out items
- reports/acquisitions-stats.tt - date searches, display of dates
- tools/cleanborrowers.tt
- tools.holidays.tt - different views of dates library is closed,
adding dates
Checked dates display according to system preference everywhere and
searching, entering dates etc. still worked as expected.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The 2 files C4/Auth.pm and install.pl *must* have the $version variable
set to what is the last old-mechanism for updatedatabase
This patch set to 3.11.00001 that is the last number when I QA this patch
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
