To test:
1 - Apply patch, update database
2 - Note new syspref 'DumpSearchQueryTemplate'
3 - Leave it off
4 - Enable DumpTemplateVariablesOpac and Staff
5 - Search on staff and opac
6 - View the source
7 - Search for 'search_query' - you shouldn't find it
8 - Enable the new pref
9 - Repeat, but you should find the query
10 - Test staff/opac search and advanced search, cataloguing search, authority search, authfinder search, adding to a basket form a new biblio
11 - All should work and show the query
12 - This will work under both ES and Zebra
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If there is a link between a suggestion and a bibliographic record (ie.
if suggestion.biblionumber is set), it makes sense to have an hyperlink
on the suggestion list at the OPAC.
Test plan:
- Create 2 suggestions
- Create an order from one of them
- Go to the suggestion list at the OPAC
=> The one with the order has a to the bibliographic record
=> The other one is not linked with a bibliographic record, and so the
title is displayed, without hyperlink
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
In French, everything has one of the binary genders (male or female),
and it affects the past tense verb agreements.
This patch adds contextualization for the "Created" verb
The following files have been modified:
booksellers.tt - refers to a basket
basket.tt - refers to a basket
transferorder.tt - refers to a basket
memberentrygen.tt - refers to a patron restriction
suggestion.tt - refers to a suggestion
To test, apply the patch and visit all those pages in English to make
sure there is no change.
1) Go to Acquisitions
2) Search for vendors
3) On the vendors result pages, check the 'Created by' column heading
of the baskets
4) Click on one of the baskets, check the basket info at the top,
it should say 'Created by:'
5) Click Transfer on one of the orders
6) Search for and choose a vendor
7) In the list of that vendor's basket, it should say 'Created by'
8) Go to a patron's account
9) Add a manual restriction in the Restrictions tab at the bottom
10) In the restriction info, it should say 'Created'
11) Click on the Purchase suggestions tab on the left
12) Add a new suggestion
13) In the Suggestion management section, it should say 'Created by:'
14) Submit the suggestion
15) From the list of suggestions, click on the title
16) In Suggestion management, it should say 'Created by:'
Next, install a new language (fr-CA used as example)
1) translate create fr-CA
2) open fr-CA-messages.po and add a translation for 'basket created by',
'patron restriction created on' and 'suggestion created by' (it doesn't
have to be real, just write something different for each)
3) translate install fr-CA
4) in the system preferences, enable the french language in
'language'
5) change interface language to french
Redo the tests above to make sure the word you put in the translation
for the basket is in the places where 'Created by' refers to a basket, that
the translation for the patron restriction is where it should be and that
the translation you put in for the purchase suggestion is in the places where
'Created by' refers to a purchase suggestion
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When a librarian is viewing the log for a given patron (tab "modification log"
from the circulation module), the "object" and "modules" parameter can
be modified. It does not make sense, we should stay in the circulation
module and avoid those fields to be modified.
Test plan:
- Modify several patrons (in order to have several modification logs)
- Go to the modification log tab of one of them
- Notice that the "Object" input is not a "Borrowernumber" labelled
input and that you cannot modify it.
Also notice that the "modules" is hidden.
- Go to the log viewer tool and notice that the view is still the same
as before this patch.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The JS conditions were wrong, we want to allow copy and move between
control fields.
Test plan:
Create a new MARC modification template action using control fields.
Confirm that you are allowed to copy/move a control field to another one
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The rules "Holds allowed (total)", "Holds allowed (daily)", "Holds per
record (count)" were not set empty when in rule editing. Also, the
text "Unlimited" was not shown for rule "Holds per record (count)"
even though it should have been since empty value means unlimited
holds per record.
To test:
1. Apply patch
2. Edit the rules "Holds allowed (total)", "Holds allowed (daily)", "Holds per
record (count)" to be empty and save
3. Make sure all of the above rules now say Unlimited
4. Edit the rules again and make sure the above rules are now in the
rule editing empty.
Sponsored-by: The National Library of Finland
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
There was no way to see the not registered guarantors apart of editing
the patron.
Test plan:
- Create a patron with category type "Child"
- Define a "guarantor surname" and/or "guarantor firstname" in the
"Contact" block (the patron is not registered)
- See the patron's detail page and notice that the info appear
- Edit and add a registered guarantor
- See the patron's detail page and notice that the 2 guarantors info appear
Note that the relationship has been added.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Changes made:
- Instead of n° print no.
- Market Identification => Market identification
- GST => Tax
To test:
- Create at least 2 baskets with one or more orders
- Create a basket group with those baskets
- Print the PDF using
- the 2 page layout
- the 3 page layout
- Verify that the changes made appear and everything looks correct
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This further improves the display if no location or no
collection has been set. Example output:
Browsing Centerville shelves, Collection: Non-fiction
Also changes 'Collection code' to 'collection' and takes
care of additional spaces before the comma.
To test:
- Make sure your OpacShelfBrowser pref is set to "Show"
- Search for a record with items and callnumbers in your OPAC
- "Browse shelf"
- Navigate back and forth, verify the information showing on
top of the list is correctly formatted
- Try different combinations for the following prefs:
- ShelfBrowserUsesCcode
- ShelfBrowserUsesHomeBranch
- ShelfBrowserUsesLocation
- Verify the display is always nicely formatted
Note: fixing capitalization here is tricky, as it also
depends on what was displayed before. If you have no
homebranch, you would want "Shelving...", if you have one
we'd like "shelving...". Left as I found it for now.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds more conditions to the shelf browser template
such that the displayed text reads as a proper list no matter
what combination of system preferences are utilized
Sponsored-by: California College of the Arts
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
DumpTemplateVarsIntranet and DumpTemplateVarsOpac are devs tools to
display the variables sent to the template. They should not be filtered
otherwise it's getting complicate to read.
For instance: $VAR1 = { var => val }
Test plan:
Turn DumpTemplateVarsIntranet on
Go to the main page
Show the source of the page
Confirm that the variable are displayed as it and not filtered
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Without this patch sorting by patron name on the 'holds awaiting
pickup' report sorted by title, surname, firstname. With this
patch the list will sort by surname, firstname, ignoring the title.
To test:
- generate and capture a hold for a patron named "Mr. A A"
- generate and capture a hold for a patron named "A A"
- generste and capture a hold for patron named "Mr. B B"
- generste and capture a hold for patron named "B B"
- go to holds awaiting pickup
- sort by patron name ascending
- holds sort Mr. A, Mr. B, A, B
- sort by patron name descending
- holds sort B, A, Mr. B, Mr. A
- APPLY PATCH
- Reload holds awaiting pickup
- Confirm holds sort on Surname
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch modifies opac-shelves.pl so that login is required if the
requested operation is anything but "view" and "list."
The patch also modifies a couple of "Log in to create a new list" links
so that they point to the list creation form instead of opac-user.pl.
To test, apply the patch and go to the main lists page (the list of
lists) in the OPAC while not logged in.
- Click the "Log in to create a new list" link.
- Log in.
- You should be taken to the "Create a new list" form.
- Also test the "New list" link shown in the toolbar when you're
viewing the contents of a list.
- When not logged in click the "Lists" menu in the page's header menu.
Clicking "Log in to create a new list" should take you to the login
form and then to the list creation form.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The budget_lock is never set (and has never been).
Test plan:
For QAer only, make sure this never worked
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If the showLastPatron syspref is disabled, we should not store the 3
cookies we use for this feature.
Test plan:
0/ Do not apply this patch
1/ Turn off showLastPatron
2/ Search for a patron, click on a result
3/ Open the cookie list of your browser
=> You see 3 cookies named lastborrowercard, lastborrowername,
lastborrowernumber
4/ Remove them
5/ Apply the patch
6/ Reload the patron detail page
=> The 3 cookies are not created
7/ Turn the pref on
8/ Reload the patron detail page
=> The 3 cookies are created
9/ Eat one of them.
QA note: it's a bit dirty, we should do that JS side, but
staff-global.js is too widely used to make the change easy. Any other
suggestions welcomed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Changing the template toolkit filter for rendering the value of
BakerTaylorBookstoreURL in opac-detail.tt and opac-results.tt from uri
to url fixes the problem.
To test (requires a Baker & Taylor username and password):
1. Enter the B&T url into BakerTaylorBookstoreURL.
2. Set BakerTaylorEnabled to "add" and enter your username and password.
3. Look up a title in the OPAC.
4. Locate a title with a cover image.
5. Click on the cover image. You are not redirected to the url stored
in BakerTaylorBookstoreURL.
6. Display the full record for the title
7. Click on the cover image. You are not redirected to the url stored
in BakerTaylorBookstoreURL.
8. Apply the patch.
9. Refresh the OPAC display.
10. Click on the cover image. You are now redirected to the specified url.
11. Return to the results list.
12. Click on a cover image. You are now redirected to the specified url.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Although I don't have valid Baker & Taylor credentials I was able to use
dummy data to verify that the links in the template are correctly
encoded with this patch.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Find or add a recod with a 264 field
2 - Make sure there is a subfield b
3 - View the record in opac
4 - Right click on publisher link and copy and paste into a text editor
5 - Note the trailing " in the search
6 - Apply patch
7 - Refresh
8 - Link is correctly formed now
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jenkins is complaining about a missing filter:
xt/find-missing-filters.t, koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-detail.tt line 573
The variable is just filled in the template but lets make Jenkins happy.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch removes the use of the jquery.cookie plugin by the basic MARC
editor for setting two interface preferences: Showing MARC tag numbers
and showing MARC documentation links.
To test, apply the patch and open the basic MARC editor.
- From the "Settings" menu, select the "Show MARC tag documentation
links" link. This should toggle the display of the "?" link next to
MARC tag descriptions.
- Reload the page to confirm that your selection has been saved.
- Perform the same test with the "Show tags" menu item.
You can also follow the changes to the cookie using the browser's
developer console. Look for cookies named 'marcdocs_***' and
'marctags_***' (where *** is the borrowernumber of the logged-in
user) and confirm that the value of each flips from "show" to "hide" and
back.
https://developer.mozilla.org/en-US/docs/Tools/Storage_Inspectorhttps://developers.google.com/web/tools/chrome-devtools/storage/cookies
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch removes the use of the jquery.cookie plugin on the MARC
Frameworks page and replaces it with a call to the new js-cookie
library.
To test, apply the patch and go to Administration -> MARC
bibliographic frameworks.
- Choose the 'MARC structure' menu item for one of the frameworks
listed.
- On the page which lists the tags in the framework, check the box
labeled "Display only used tags/subfields." The page should reload.
- The checkbox should remain checked and the list of tags should now
show only used tags.
- Uncheck the checkbox and the page should reload again.
You can also follow the changes to the cookie using the browser's
developer console. Look for a cookie named
'marctagstructure_selectdisplay' and confirm that the value flips from 0
to 1 and back.
https://developer.mozilla.org/en-US/docs/Tools/Storage_Inspectorhttps://developers.google.com/web/tools/chrome-devtools/storage/cookies
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
1) Apply the patch
2) Have a Z39.50 endpoint with attr 31 defined - Library of Congress
supports this
3) Try to find some biblio records through Z39.50 using the new field
"Publication year" in acquisition module
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
1) Apply the patch
2) Have a Z39.50 endpoint with attr 31 defined - Library of Congress
supports this
3) Try to find some biblio records through Z39.50 using the new field
"Publication year"
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Set a rule to allow multiple holds on a title
2 - Place a single hold in the opac for a patron
3 - Return to record and attempt place a second hold
4 - Note there is no message but that you must match the type placed before (item or record level)
5 - Don't place the hold
6 - Apply patch
7 - Attempt to place second hold again
8 - Note there is a message informing you of which level hold you may place
9 - Test with both item/record level holds and placing a single request or multiple requests
Signed-off-by: Donna Bachowski <donna@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If there is a link between a suggestion and a bibliographic record (ie.
if suggestion.biblionumber is set), it makes sense to have an hyperlink
on the suggestion detail page.
Test plan:
- Create 2 suggestions
- Create an order from one of them
- Go to the detail page of the suggestion
=> The one with the order has a to the bibliographic record
=> The other one is not linked with a bibliographic record, and so the
title is displayed, without hyperlink
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch moves the preference from OPAC/Privacy to Circulation/Check
In
To Test:
1) Apply the patch
2) Check that the system preference no longer displays under the OPAC
Privacy tab
3) Check that it now displays in the Circulation tab, under the Check In
policy
4) Ensure that the system preference can be changed and saved correctly.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To match the line above, a colon (:) was added after the description:
Callnumber classification scheme: [pull down]
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This does a few things:
* We fetch the cn_sort from the DB and use this rather than calculating based on DefaultClassificationSource
We were already pulling based on the items source, so this should not change things
* Rather than using JS to submit the form, it submits via html
* Fix subtitle display and add barcode (it was retrieved in one query but not used)
* Add option to apply different classification scheme to the search
To test:
1 - Add cn_browser.pl to the 'plugin' field in a framework for 952$o
2 - Edit an item on a record in that framework
3 - Enter an itemcallnumber
4 - Click the two dots to launch the callnumber browser
5 - Note the results
6 - Apply patch
7 - Repeat
8 - Note subtitles and barcodes are displayed in results
9 - Note callnumbers are appropriate
10 - Try changing the class source used
11 - Try this with differing dewey,lcc, and other callnumbers
12 - Ensure results are as expected
Signed-off-by: Myka Kennedy Stephens <mkstephens@lancasterseminary.edu>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
A number (just as on most other tabs) tells more than a boolean (i.e. the
tab does not appear for zero marc notes). Intuitively, you might be misled
by "Holdings (1), Descriptions" and think there are none.
Test plan:
Verify that the number of title notes on opac detail page matches your
expectations.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch preserves someting closer to previous functionality.
Negative not for loan are in the 'unavailable' section in red, positive ones are in the 'reference' section in green. Itemtype level will also be in green in reference
Item specific status will override an itemtype level.
The line break between 'reference' and 'unavailable' existed before and is preserved - negative not for loan and checked out items appear here
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This makes the changes apply to both positive and negative notforloan values
The extra line generated before is removed
Some spans are added and cleaned up and labels moved to CSS to allow for easier altering where needed
Itemtypes marked notforloan remain as reference, the label can be changed via css
To test:
1 - Have a record with items in various statuses, ideally
- 3 available, with 2 in one branch, 1 in another
- 3 with itemtype not for loan, 2 in one branch, 1 in another
- 3 in a positive not for loan status, 2 and 1 as above
- 3 in a negative not for loan status, 2 and 1 as above
- 1 in a different positive loan status, but with the same opac description as the negative above
2 - Search the opac to include this record, take a screenshot
3 - Apply patch
4 - Restart all and refresh
5 - Compare to screen shot
6 - Differences include:
- Positive statuses are now on separate line with opac description showing
- Unavailable (not for loan items) now include callnumber and branch in display
- Positive and negative notforloan with same description are combined where branches match
- Inspect the elements, note new spans around 'Items available for
loan/reference'
7 - Add to OPACUserCSS:
.ItemSummary .ItemBranch{
display:none;
}
.unavailable .ItemSummary .CallNumber,.unavailable .ItemSummary .LabelCallNumber{
display:none;
}
8 - Note the branches are hidden, and callnumbe rhidden for unavailable
items
Signed-off-by: Jessica Zairo <jzairo@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Added : Call number for all not for loan status
XSLT Results template improvement : Use the NOT_LOAN authorised values
Improvement : Use the NOT_LOAN authorised values when showing items status in the OPAC search results.
Before this patch, these items were only considered as "unavailable".
Note : This patch only affects the OPAC XSLT search results template for MARC21 records. This patch was not tested on UNIMARC or NORMARC records. I won't be able to support these formats, so I'm hoping someone could do the same for these other record formats.
Sponsored-by: CCSR ( http://www.ccsr.qc.ca )
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch makes corrections to cataloging.js so that there are no
issues flagged by eslint. The fewer eslint warnings we have to see makes
it more likely that real problems will be noticed.
Some functions were unused have been removed.
To test, apply the patch and clear your browser cache if necessary.
- Open a MARC record for editing in the basic cataloging editor.
- Test the JavaScript-driven functionality affected by the changed
file:
- Open the authority browser from a field (e.g. 100a) which is
linked to an authority type.
- Clone a repeatable tag.
- Clone a repeatable subfield
- "Unclone" a tag or subfield: This should remove the tag or
subfield (if possible) or clear the contents of the tag or
subfield if not.
- Clone a subfield on the item edit page (In my MARC21 installation
I had to modify the default framework in order to have a
repeatable item subfield to test with).
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Same problem as previous patch in Batch item modification as well as
serial-edit.pl.
Test plan:
[1] Go to Tools/Batch item modification.
Test cloning subfield on batchMod-edit.
[2] Go to a serial with "Create item when receiving".
Receive an issue. Click add item.
Test cloning subfield.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Instead of the parentNode (which is a div), we need the parent of the div
(which is a li).
So a simple fix.
Test plan:
To see the difference, test first without patch applied:
Mark item subfield, say URI, as repeatable.
Clone that subfield in item editor.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
2 js files (Gettext.js, i18n.js) + 1 generated js file (locale_data.js)
were added by bug 21156. Their URL are broken and the files are not loaded.
Use Template::Toolkit plugin Asset to include these files, and exclude
locale_data.js when language is english, because obviously translations
are not needed in this case.
Test plan:
1. Just make sure the files mentioned above are loaded correctly when in
English and in other languages as well
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Use the value in URLLinkText in 952$u, or if not set, use 'Link to
resource'.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch updates the wording in the 'lost and found' process to more
closely reflect what the process is achieving by replacing 'RETURNED'
with 'FOUND'
Test plan:
1) Grep codebase for _FixAccountForLostAndReturned and note there are no
longer any instanced of it.
2) Run t/db_dependent/Circulation.t and note it passes
3) Test returning/renewing an item that has been marked as lost and note
the updated values in the accountlines now use LOST_FOUND as
credit_type_code and 'FOUND' as the status for the 'LOST' fee
(debit_type_code 'LOST')
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patchset adds support for extracting 'max_ver' from the cpanfile so
we can use version ranges properly and report errors if we have modules
installed that do not fit within that version range.
Test plan:
1) Manually modify the module version of a required module in the cpanfile
to have a max version greater than the version you have installed.
2) Run through the install proceedure and note the new warning that a
module needs upgrade for the module in question.
3) The module should also be reported in the about page
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The 'usage' key was dropped as part of this migration to cpanfile but
it was still refered to by the installed. This patch simply removes
references to it. After considering how we might add it back in I
decided that as it stands it wasn't a well maintained list and should be
re-implimented in the future in a more consistent form if we miss it.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Merges "AreMandatoriesNotOk" and new "AreImportantsNotOk" into one
function "AreFieldsNotOk". It can search for mandatory or important
fields depending on the value of it's boolean "mandatory"
parameter.
To test:
This patch should not change current behavior.
Follow the test plan from previous patch and check that saving is
still prevented for unfilled mandatory fields.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This fix permits to add an "Important" option to the marc structure pages.
Testing:
1) Apply the patch
2) Run updatedatabase.pl
3) Regenerate CSS
4) Define 100 as an "important" field ( Administration » MARC bibliographic framework » MARC structure ( Default Frameword) » Edit )
5) Define 100$a as an "important" subfield (Administration » MARC bibliographic framework » MARC structure (Default Frameword) » Subfield » Onglet a)
6) Edit a record to clear the field 100 (subfields are all blank)
7) Save the record.
8) Validate the following message:
A few important fields are not filled:
* tag 100 subfield a Nom de personne in tab
* Field 100 is important, at least one of its subfields should be filled.
Are you sure you want to save?
Sponsored by the CCSR ( http://www.ccsr.qc.ca )
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds 2 new columns on the suggestions table on purchase-suggestions.tt. These use the data-order attribute to allow for sorting.
TEST PLAN:
1. Have a patron with some suggestions that have been managed by staff. (accept or reject the request).
2. View that patrons suggestions from purchase-suggestions.pl.
3. No suggested on or managaed on columns.
4. Apply patch and reload the page.
5. The new columns are there, have multiple suggestions and make sure sorting by the date works.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
It adds Javascript equivalent of Koha::I18N's exported subroutines, and
they are used the same way.
String extraction is done only on *.js files and require gettext 0.19
(available in Debian jessie, and also in wheezy-backports)
It adds Javascript library Gettext.js for handling translation and a
Perl script po2json to transform PO file into JSON.
Gettext.js and po2json both come from Locale::Simple.
There are several tools named po2json. It's simpler to integrate this
one into Koha than to check if the good one is installed on the system.
Locale::Simple is not needed.
To avoid polluting the global namespace too much, this patch also
introduce a global JS object named Koha and add some stuff in Koha.i18n
Test plan:
1. Add a translatable string in a JS file. For example, add this:
alert(__nx("There is one item", "There are {count} items", 3,
{count: 3}));
to staff-global.js
2. cd misc/translator && ./translate update fr-FR
3. Open misc/translator/po/fr-FR-messages-js.po, verify that your
string is present, and translate it
4. cd misc/translator && ./translate install fr-FR
5. (Optional) Verify that
koha-tmpl/intranet-tmpl/prog/fr-FR/js/locale_data.js exists and
contains your translation
6. Open your browser on the staff main page, change language and verify
that the message is translated
7. Repeat 1-6 on OPAC side
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works well, translation is OK and test message is displayed correctly.
Current qa-tool error is a false positive.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds columns configuration to the holds awaiting pickup
tables. Doing so helps solve the printing issue by adding a "Print"
option to both tables. Using this print function will provide a
printable version of only that table.
To test you should have multiple holds in your system which are marked
"waiting" and some which have been waiting longer than the value
specified in the ReservesMaxPickUpDelay system preference.
Apply the patch and go to Circulation -> Holds awaiting pickup.
- On both the "Holds waiting" and "Holds waiting over..." tabs the
DataTable should display correctly and all the controls should work,
including the columns settings and the choices in the export menu.
- Confirm that the "Print" action creates a printable version of only
the table you are viewing.
- Go to Administration -> Columns settings -> Circulation.
- Change some visibility controls for the tables under the
"holds_awaiting_pickup" heading (id=holdso and id=holdst). Confirm
that these changes are reflected in the "Holds waiting" interface.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The use of cash registers adds the requirement to enter a payment type,
this patch adds the required status when cash registers are configured.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch removes the SIP payments types from displaying in the select
options on the point of sale payment page.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch for the point of sale feature fixes an issue where items for
purchase with a value of $1,000 or more break the payment calculations.
Test plan:
1) Enable the point of sale feature
(EnablePointOfSale + UseCashRegisters system preferences)
2) Add a cash register for a library
(Home > Point of sale > Cash registers > New cash register)
3) Create a purchase item with a cost of $1000
(Home > Point of sale > Purchase items > New debit type)
4) Go to to the point of sale page and attempt to sell one of your items
(Home > Point of sale > click 'Add' next to the item to purchase)
5) Note that Koha inserts a comma into the price in the list of items for
purchase
6) Note that the 'Amount being paid' changes to 0.00 instead of $1,000,
which affects the other calculations
7) Apply the patch
8) Repeat step 4
9) Amount being paid and other calculations should now be correct
10) Enter an amount for 'Collected from patron' and click 'Confirm'
check that the change calculation is correct.
11) Sign-off the patch!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When a high enough number of forks try to access for example system
preferences with Koha::Cache using memcached as backend the results of
different cache requests get mixed up.
The problem is fixed by using Cache::Memcached::Fast::Safe that is a
fork safe version of Cache::Memcached::Fast.
Sponsored-by: The National Library of Finland
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described, and solves an insidious difficult to debug
problem in Koha.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 19618 replaces the call to placerequest.pl with a REST API /holds
That is wrong as it does not support multi holds.
Test plan:
Confirm that prior to this patch you are not able to place a hold on
several records at once, and that this patch fixes it
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
So far the sorting on volume information is incorrect. It sorts by the
string displayed in the cell, which may not have any logics.
A better solution would be to use Kyle's suggestion, see comments 7, 8,
but it will need much more work.
This patch suggests to use the publication date to sort this column.
Note: In the code there is a switch depending on the existence of
items.publisheddate, but I do not think it is valid, this valid should
always exist if the item is received (did I miss something?)
Test plan:
You need to have different existing subscription, using different
numbering.
On the detail page of the bibliographic record you should be able to
sort the serials (tab "Holdings") by "Serial enumeration".
The sort will now use the publication dates.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
At the moment only the title will display in the course reserves
details, but not the information from other title fields. For
series with multiple volumes that can lead to confusing display.
The patch makes use of the new include to display 245$abnp.
To test:
- Add mulitple records to a course reserce course
Make sure you have some with different combinations of 245$b$n$p
- Look at the course details in the OPAC
- Verify only $a displays
- Apply patch
- Reload
- Verify now the full information displays
Depending on your installation, you might want ot check that the 245
are correctly mapped and save the record once so the database
fields are correctly filled.
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds "Updated on" column to patron's notices tab. It also adds logic to C4::Letters to retrieve updated_on column.
To test:
1. Apply patches.
2. Restart plack.
3. Choose a patron and add a purchase suggestion.
4. Change suggestion status.
5. Open patron's notifications.
CHECK => Messages table has now "Updated on" and "Time created" columns, and "Time" column is gone.
SUCCESS => There is a message with status pending, with a "time created" that equals "updated on"
6. Execute in the shell in Koha directory
$ ./misc/cronjobs/process_message_queue.pl
7. Open patron's notifications one more time.
SUCCESS => The message changed status. Time created remained the same, and now "updated on" has the current timestamp.
8. Resend the message and repeat sep 6.
SUCCESS => Every time you change the status, time created remains the same and updated on updates.
9. Run `prove t/db_dependant/Letters.t`
10. Sign off
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To Test:
1. Place a hold on an item and trigger it.
2 Do a cataloging search that would include this record.
3. Notice that the 'Location' column does not account for this onhold
item.
4. Apply patch and look at catalog results again.
5. You should see information display about the item being on hold.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Go to Cataloguing
2 - New from Z3950
3 - Find an import a record
4 - Check the plack logs:
Use of uninitialized value in string ne at /kohadevbox/koha/cataloguing/addbiblio.pl line 565.
Use of uninitialized value in string ne at /kohadevbox/koha/cataloguing/addbiblio.pl line 580.
Use of uninitialized value $frameworkcode in string eq at /kohadevbox/koha/cataloguing/addbiblio.pl line 711.
Use of uninitialized value $frameworkcode in string eq at /kohadevbox/koha/cataloguing/addbiblio.pl line 715.
Use of uninitialized value $frameworkcode in string eq at /kohadevbox/koha/cataloguing/addbiblio.pl line 734.
5 - Apply patch
6 - Repeat
7 - No new errors
8 - Confirm selecting 'Default' from 'New from Z3950' dropdown also generates no errors
Signed-off-by: Myka Kennedy Stephens <mkstephens@lancasterseminary.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
t/db_dependent/selenium/patrons_search.t is failing because of this change:
# got: 'Koha › Patrons › Modify patron <strong>fir's"tname</strong> \123 ❤ test_patron_1 ( iOVAoJj )'
# expected: 'Koha › Patrons › Modify patron <strong>fir's"tname</strong> \123 ❤ test_patron_1 (iOVAoJj)'
We are adding space after and before the open/close parenthesis of the category code.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
holds_per_day and reservesallowed are set to unlimited in the rules
inserted by misc4dev
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Same as bug 22021 for the withdrawn status.
1. Withdraw an item
2. Place an hold on this item
Notice the new "withdrawn" status in the information column
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The modal needs to be defined in both cases.
Test plan:
Repeat test plan from bug 23031 and click on the buttons!
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch modifies the OPAC search results template to check for three
populated system preferences before performing an OverDrive search:
OverDriveLibraryID, OverDriveClientKey, and OverDriveClientSecret.
Previously OverDriveLibraryID was not checked, but without it the
interface reports an error performing the search.
To test you must have credentials for the OverDrive API as defined
in OverDriveClientKey, OverDriveClientSecret, and OverDriveLibraryID
system preferences.
- With OverDriveLibraryID defined, the catalog search results page in
the OPAC should show a link to results in the library's OverDrive
collection.
- With no value in the OverDriveLibraryID preference the catalog
search page should not show any message about an OverDrive
collection.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
On the OPAC, the dropdown for Lists always includes
the heading Public Lists, even if no public lists exist.
This is sub-optimal for libraries that want VirtualShelves
enabled for private lists but don't want to use public lists.
TEST PLAN:
1. have no public list and look at the List dropdown on the OPAC. It says No Public Lists.
2. Apply patch
3. It should now not say anything about public lists but still be formatted nice.
4. Add some public lists and confirm that everything looks normal.
5. Sign off
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds comments to the template to highlight the markup
structure.
This patch should have no effect on the interface or functionality.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch re-indents the template for patron entry/editing. It
makes only whitespace changes. It should have no effect on the behavior
of the page.
To test, create or edit a patron.
Test every aspect of the process. At each step the page should work
correctly. Including:
- Adult patron
- Child patron
- Organizational patron
- Quick patron add
- Duplicate patron
- With mandatory fields
- With 'BorrowerUnwantedField's defined
- With ExtendedPatronAttributes enabled
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch changes the wording of the links on the POS side menu
To test:
1) Apply the patch
2) Check that the links on the left hand side of the screen read "Configure cash registers" and "Configure items for purchase"
3) Click both links to ensure you are taken to the relevant config pages.
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
Add some fines
Check auto_renew and check an item out, using a title keyword
Pick one item
You get the confirmation box
=> Notice that the auto_renew checkbox is checked
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The auto_renew parameter is not sent to the template when the popup
triggered by itemBarcodeFallbackSearch is displayed.
Test plan:
- Turn on itemBarcodeFallbackSearch
- Open a patron account
- Check the checkboxes for automatic-renewal
- Search for a title keyword in the checkout input box
- Verify that auto-renewal flag is set
Note for QA: The auto_renew flag will be set in any cases. Should we
expect regression?
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The itemtype and categorycode were always set to '*'
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
- holds per day are not transferred in database update (actually not
displayed)
- in note column, I can see link "view notes" even if there is no note
- No automatic renewal after (hard limit) does not respect dateformat
and is shown in iso format
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This necessitates moving the circ rules from using '*' to using
undef/NULL.
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Roberts <david.roberts@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When you create hierarchical groups of libraries you are not allowed to add
several times the same library to a given group/subgroup. The libraries
that are part of the group is not displayed on the interface, to prevent
the user to select it.
However this restriction is only done template-side, the controller and
module does not handle it.
To prevent that this patchset enforces the constraint at DB level, and
display a message to the end user.
Test plan:
- Go to Home › Administration › Library groups
- Add a group
- Add a library
- reload the page several times
=> Without this patch the same library appears several times in the group
=> With this patch applied you will see a friendly error message
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Since bug 21364 we have 'view' then 'add to basket' that is accessible
in 2 clicks. We should have it directly accessible.
Test plan:
Create a new basket
Add a new order to the basket (note that the link is directly
accessible)
When a new order is added you can close the basket from the basket list
view
Note that the dropdown button displays correctly
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch removes the "neworderbiblio" script and template which are
made obsolete by the "search to order" feature.
deleted: acqui/neworderbiblio.pl
deleted: koha-tmpl/intranet-tmpl/prog/en/modules/acqui/neworderbiblio.tt
Some documentation in addorder.pl has been corrected to remove reference
to neworderbiblio.pl.
To test, apply the patch and verify that the correct files have been
removed.
Search the Koha codebase to verify that no links to
acqui/neworderbiblio.pl remain.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch modifes the process of searching for an existing record
to add to a basket. Now the search is performed as a keyword search in
the regular catalog rather than via a custom search script. Options are
added to the search results and detail pages to add results to an order.
This process follows the same pattern as the "Search to hold" feature:
When the search is initiated, a cookie is set with the requisite
information--in this case vendor id and basket number.
If the search results or bibliographic detail pages detect that a
"searchToOrder" cookie is present, the correct "Add order" link will be
shown. Like with the "search to hold" feature, the cookie expires in 10
minutes.
To test, apply the patch and log into the staff client as a user who has
permission to add to a basket in acquisitions.
- Go to Acquisitions -> Vendor -> Basket -> Add to basket.
- Using the "From an existing record" option, perform a search.
- On the search results page, test the "Add order" link which appears
with each result. Clicking the link should take you to the "New
order" page for the correct vendor and basket. The catalog
details section of the form should include the correct information.
- From the search results page view the bibliographic details page for
any record. There should be a new toolbar button, "Add order." Verify
that it works correctly.
- Test the same thing from all bibliographic detail pages: Normal,
MARC, Labeled MARC, ISBD, as well as the items page
(moredetail.pl).
- Test this process for both the locations in acquisitions where one
can add to an existing basket: Vendor search results and the basket
detail page
- Test the cookie timeout: Wait 10 minutes and perform another catalog
search. The "Add order" link should no longer be present.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Also fixes the following QA failure:
forbidden pattern: Attribute type should not be used for script tags (bug 20053) (line 840)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This new enhancement adds the ability to update the item types for
selected suggestions on the suggestions management page
(suggestion/suggestion.pl)
To achieve this goal we needed to refresh a bit the template, in order
to get rid of weird code. To not recreate the previous coding awkwardness
some code has been rewritten (mainly the removal of suggestiontype)
Test plan:
- Create some suggestions
- On the suggestions management page, select some of them and a new item
types.
- Submit the form and confirm that the itemtype of the suggestions has
been updated
- Also you should confirm that the "delete" and "change status" still
work as before
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds JavaScript to the list contents page which converts the
resort form's <select> menu into a Bootstrap dropdown menu. This allows
for a more compact and consistent display.
To test, apply the patch and regenerate the OPAC CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
View a list in the OPAC. The toolbar of list controls ("New list,"
"Download list," etc.) should have a similary-styled "Sort" button. Each
sorting option should work correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
