To test:
1. Apply patch, restart_all
2. Check some items out and prepare some reasons that would initiate a branchtransfer. According the schema it can be any of the following: 'Manual', 'StockrotationAdvance', 'StockrotationRepatriation', 'ReturnToHome', 'ReturnToHolding', 'RotatingCollection', 'Reserve', 'LostReserve', 'CancelReserve', 'TransferCancellation', 'Recall', 'RecallCancellation.
3. CHeck in some the items and notice the 'Transfer reason' column in the table. Make sure the reasons are acurate and make sense.
4. To go Table settings and find the 'checkedintable'. Make sure you can properly hide the column from the display.
Signed-off-by: AndrewA <andrew.auld@ptfs-europe.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The anonymous patron circulation page should show an alert message and not allow check-out.
1) Configure an existing borrowernumber in system preference
AnonymousPatron
2) Go to circulation page of this borrower :
/cgi-bin/koha/circ/circulation.pl?borrowernumber=x
3) Check you see alert 'This is the anonymous patron, so circulation is disabled.'
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Johanna Miettunen <johanna.miettunen@haaga-helia.fi>
Signed-off-by: Päivi Knuutinen <paivi.knuutinen@joensuu.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 22284 introduced ability to create hold groups.
We should have ability to create float groups in
same manner. This patch adds checkbox "Is local
float group" to group creation feature and new return
policy "Item floats by librarygroup".
To test:
1. Add new float group and some libraries to it.
2. From circulation and fine rules, set default
return policy as "Item floats by library group".
3. Check out an item for a patron.
4. Set library as one that belongs in the same
float group.
5. Check in the item.
=> Observe that notice for transfer doesn't pop up.
6. Check out again.
7. This time set library as one that doen's
belong in the same float group.
8. Check in.
=> Observe that notice for transfer pops up.
Experiment this feature by changing return policy
per library, item type etc.
Also prove t/db_dependent/Koha/Libraries.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Lisette Scheer <lisettePalouse+Koha@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test Plan:
1) Generate the holds queue
2) Load the holds queue viewer page
3) Apply this patch
4) Restart all the things!
5) Reload the page
6) Note nothing has changed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] Removed skip_record_index => 1 from automatic_renewals.pl. See BZ.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the patron search bar and pages to default search
method to that defined by DefaultPatronSearchMethod system preference.
Test plan
1) Prior to this patch confirm that regardless of what you set
DefaultPatronSearchMethod to, the search in /members/member.pl,
members/members-home.pl and the search from the patrons search top bar
all default to 'contains'.
2) Apply the patch
3) Confirm that the system preference now affects the default option for
match type upon page load.
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The tool has not been updated and is no longer working with modern
browser.
It should either be rewritten/adjusted or removed. Given that we didn't
get complains its non-functional status, bugs related to this tool
didn't get attention, and the community is lacking resources, I am
suggesting to remove it and redirect users to the koct FF plugin that
is known to be working.
Test plan:
See bug 10240 and use `git grep` to confirm that we are removing all
tracks of this feature.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1) Run the following test and make sure all pass:
t/db_dependent/api/v1/biblios.t
t/db_dependent/api/v1/checkouts.t
t/db_dependent/api/v1/return_claims.t
t/db_dependent/Circulation/CalcDateDue.t
t/db_dependent/Circulation/CheckIfIssuedToPatron.t
t/db_dependent/Circulation/dateexpiry.t
t/db_dependent/Circulation/GetPendingOnSiteCheckouts.t
t/db_dependent/Circulation/GetTopIssues.t
t/db_dependent/Circulation_holdsqueue.t
t/db_dependent/Circulation/IsItemIssued.t
t/db_dependent/Circulation/issue.t
t/db_dependent/Circulation/MarkIssueReturned.t
t/db_dependent/Circulation/maxsuspensiondays.t
t/db_dependent/Circulation/ReturnClaims.t
t/db_dependent/Circulation/Returns.t
t/db_dependent/Circulation/SwitchOnSiteCheckouts.t
t/db_dependent/Circulation.t
t/db_dependent/Circulation/TooMany.t
t/db_dependent/Circulation/transferbook.t
t/db_dependent/DecreaseLoanHighHolds.t
t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
t/db_dependent/HoldsQueue.t
t/db_dependent/Holds/RevertWaitingStatus.t
t/db_dependent/Illrequests.t
t/db_dependent/ILSDI_Services.t
t/db_dependent/Items.t
t/db_dependent/Koha/Account/Line.t
t/db_dependent/Koha/Acquisition/Order.t
t/db_dependent/Koha/Biblio.t
t/db_dependent/Koha/Holds.t
t/db_dependent/Koha/Items.t
t/db_dependent/Koha/Item.t
t/db_dependent/Koha/Object.t
t/db_dependent/Koha/Patrons.t
t/db_dependent/Koha/Plugins/Circulation_hooks.t
t/db_dependent/Koha/Pseudonymization.t
t/db_dependent/Koha/Recalls.t
t/db_dependent/Koha/Recall.t
t/db_dependent/Koha/Template/Plugin/CirculationRules.t
t/db_dependent/Letters/TemplateToolkit.t
t/db_dependent/Members/GetAllIssues.t
t/db_dependent/Members/IssueSlip.t
t/db_dependent/Patron/Borrower_Discharge.t
t/db_dependent/Patron/Borrower_PrevCheckout.t
t/db_dependent/Reserves/GetReserveFee.t
t/db_dependent/Reserves.t
t/db_dependent/rollingloans.t
t/db_dependent/selenium/regressions.t
t/db_dependent/SIP/ILS.t
t/db_dependent/Holds.t
t/db_dependent/Holds/LocalHoldsPriority.t
t/db_dependent/Holds/HoldFulfillmentPolicy.t
t/db_dependent/Holds/HoldItemtypeLimit.t
t/db_dependent/Circulation/transferbook.t
2) Performe one or more checkouts for a patron, making sure
that the circulation rules allows for renewals (for example by
setting an earlier due-date).
3) Log in as this patron in OPAC and make sure the list of
checkouts is displayed correctly, and that renewing an issue
still works.
Sponsored-by: Gothenburg University Library
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
During a Webinar discussion regarding the new placement of the circulation messages appearing in the Patron Detail page. It was commented by a librarian that it would be nice to have the circulation messages editable. At times libraries need to keep a specific message on a patrons account with the details such as what branch it was written from and the staff member that wrote it, but it would be nice to be able to edit this message.
Test Plan:
1) Apply this patch
2) Restart all the things!
3) Browser to a patron record
4) Create a new patron message
5) Note the patron message now has an "edit" button
6) Edit the existing message using the edit button and form
7) Check the action logs for that message, note there is a modification
logged to that message if BorrowersLog is enabled
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Since Bug 30718, date due uses flatpickr.
The JavaScript code setting due date via on-site checkout checkbox needs to be adapted.
Sort of like Bug 30717.
This patch renames the variable sent to template
'today_due_date_and_time' to avoid confusion with variable 'todaysdate'
used in other templates.
Test plan :
1) Enable system preference 'OnSiteCheckouts'
2) Go to a patron circulation page /cgi-bin/koha/circ/circulation.pl
3) Click on settings icon inside barcode input
=> Check due date input is empty
4) Click on 'On-site checkout'
=> Check due date input is filled with today date at 23:59
5) Fill barcode input and do check-out
6) Check due date is correct
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a button in the "bundle verification" modal to skip
this step and do the checkin anyway.
Test plan:
1. Create an items bundle (see bug 28854 comment 458)
2. Check out this bundle, then return it. The "bundle verification"
modal should appear
3. Leave the textarea empty and click on "Confirm checkin without
verifying bundle contents"
4. Confirm that the bundle was correctly returned, and no items were
marked as lost
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several circulation templates so that they use the
new WRAPPER for displaying breadcrumbs.
The patch also makes a minor change to bookcount.pl to allow for correct
display of the record title using the biblio-title include.
Navigation context for bookcount.tt has been changed to "catalog" from
"circulation" because the page is linked to from a catalog-related page.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Circulation home page
- Checkout notes
- Article requests
- Transfer
- Overdues with fines
- Check out -> Check out to patron ->
- Batch check out
- Catalog -> Search -> Bibliographic record -> Items
- View item's checkout history. The updated page should show this new
breadcrumb sequence: Home -> Catalog -> [title] -> Items ->
Circulation statistics
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is a rebased submission following bug 31095 which removed the use of GetDebarments. This patch now uses $patron->restrictions to find the date and pass it to the template
Test plan:
1) Create a restriction on a patron and navigate to that patron in Checkouts or the patron details page
2) There should be a message with details about the restriction but the creation date of the restriction won't be included in the message
3) Apply patch
4) The message should now say "Restricted since DATE" as in the screenshot attached.
5) Change the 'dateformat' syspref and refresh, the date should change to reflect the syspref
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
They are displayed by date of creation, it's not what we want for "to be
staged" for instance, where it needs to be ordered by date/time of
scheduled pickup.
Test plan:
Create several curbside pickups, to have some in the different tabs
Confirm that the order is the one you expect.
=> to be staged ordered by pickup date/time
=> stage and ready ordered by pickup date/time
=> patron is outside ordered by arrival date/time
=> delivered today ordered by *desc* delivered date/time
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Place some holds
2. Go to Circulation > Holds to pull
3. Notice there is not column to indicate collection ( CCODE )
4. Apply patch and restart services
5. Step 2 again, this time you should see a column for holds to pull
6. Using both the Columns button and via 'Table setting' attempt to hide the column and other columns. Ensure everything is being heiiden correctly.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 32421: (follow-up) Correct table settings
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch, updatedatabase, restart_all
2. Have a user with superlibrarian privileges ( User1 )
3. Have a user who has staff access and circulate privileges but is not a super librarian. ( User2 ) Make note of this users home library
4. Turn on the system preference 'CircSidebar'.
-MAIN log in ( auth.tt )
5. As User1, go to the main login screen and try logging in. You should be able to log in AND you should be able to properly chnage your branch BEFORE logging in.
6. As User2, to to the main login screnn amd try logging in. You should be able to but if you try and switch your libraray to anything beside the user's home branch it will not work. You will be logged in at your home branch.
7. For User2, set the new top level permission 'Allow staff to change logged in library (loggedinlibrary).
8. Now you should be able to successfully switch libraries before log in.
9. Turn the 'loggedinlibrary' permission back off for User2.
-AFTER log in-
10. With User1, click on your name/branch in the top right, you should see the the link 'Set library' at the top. If you turn on 'UseCirculationDesks' the link will be 'Set library and desk'.
11. With User2, click on your name/branch in the top right. If you have 'UseCirculationDesks' on, you should see 'Set desk', otherwise you should see nothing.
12. Repeat step 7.
13. NOw if you click on your name/branch in the top right, you should see the the link 'Set library' at the top. If you turn on 'UseCirculationDesks' the link will be 'Set library and desk'.
14. Repeat Step 9.
-CircSideBar-
15. With 'CircSideBar' turned on, go to any ciculation page (Holds queue, Holds to pull, Holds awaiting pickup) with User1. You will see the 'Set library' link. If 'UseCirculationDesks' is on you will see a 'Set library and desk'.
16. Try with User2 and you will not see a 'Set library' link. If 'UseCirculationDesks' is on you will see a 'Set desk' link.
17. Repeat step 7.
18. For with User2 you go to any ciculation page (Holds queue, Holds to pull, Holds awaiting pickup). You will see the 'Set library' link. If 'UseCirculationDesks' is on you will see a 'Set library and desk'.
19. Repeat step 9.
-Set library page-
20. Go to the set library page (http://localhost:8081/cgi-bin/koha/circ/set-library.pl) with User1. You will see a dropdown for 'Set library'. Make sure you can change your library successfully.
21. Go to the set library page (http://localhost:8081/cgi-bin/koha/circ/set-library.pl) with User2. You should NOT see see a dropdown for 'Set library'.
22. Repeat step 7.
23. Go to the set library page (http://localhost:8081/cgi-bin/koha/circ/set-library.pl) with User2. Now you should see a dropdown for 'Set library'.
Signed-off by: Bob Bennhoff/AspenCat Team
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some of our scripts have a space in the "shebang" (first) line:
#! /usr/bin/perl
This is not illegal, and it does work, but it is good to be
consistent, so this patch removes the space.
To test:
- Run: grep -rn --include=*.pl '#! /usr/' *
- See the list of files that have a space in the shebang
- Apply the patch
- Run the command again, there should be no output, meaning there
are no more files with space in the shebang
- Have a look at the patch and check that it only changes the
shebangs
- Sign off
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch remove the use of GetDebarments from circ/circulation.pl,
replacing it with a reference to patron.restrictions in the template and
includes.
Test plan
1. Confirm that the 'Restrictions (x)' tab still appears on the checkout
page for a user.
2. Confirm that the 'Restrictions (x)' tab count is correct
3. Confirm that the 'Restrictions (x)' tab table functions
4. Confirm that the 'Restrictions (x)' tab 'Add manual restriction' form
works as expected
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
* Turn on patronimages system preferences
* Go to any patron account
* Hover over the 'dummy image' for the Add button
* Browse and select an image for upload
* Saving results in the following error:
The form submission failed (Wrong CSRF token). Try to come back, refresh the page, then try again.
Apply patch and try again. You shouldn't need to try twice, it should work on the first attempt now.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Librarians would like the page to be automatically refreshed every X minutes.
This patch is suggesting to have a checkbox at the top of the page to
let the user refresh the page given the delay they want.
We could later improve this by setting this value in a localStorage
variable.
Test plan:
Go to the curbside pickup page
Notice the new checkbox at the top
Notice that the "Refresh" button has been moved at the top as well
Play with the checkbox and the input, and confirm that the behaviour is
consistent
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This enhancement gives the ability to set a policy for the lost item
processing fee that may get charged additional to the lost item
replacement cost. The processing fee can be:
- refunded
- refunded if unpaid
- kept
To test:
Set-up
1. Find an item, Item A. Go to Administration -> Item types and edit the
item type for Item A. Add a default replacement cost and a processing
fee and Save.
2. Go to Administration -> system preferences and set the following:
- WhenLostChargeReplacementFee: Charge
- BlockReturnOfLostItems: Don't block
3. Scroll down to the default lost item fee refund on return policy. Set
the refund lost item replacement fee policy to 'refund lost item charge'.
4. Edit Item A and set a replacement cost.
Reproduce
5. Check out Item A to Patron A.
6. Click the barcode to view Item A's information. Edit Item A and set
the Lost status to 'lost'.
7. Go back to Patron A's checkouts. The item should now be checked in
with two new charges applied - a lost item fee (the item's replacement
cost) and a lost item processing fee (set in item types).
8. Check in Item A to mark it as found.
9. Go back to Patron A's account. Notice the lost item fee has been
refunded, but the processing fee remains.
10. Manually pay or write off the processing fee. This enhancement
removes the need for this manual step.
11. Apply the patch and restart services
Test with lost item - refund
12. Go to Administration -> circulation and fines rules. Scroll down to
the default lost item fee refund on return policy. Notice there is now a
refund lost item processing fee policy. Set this to 'refund lost item
processing charge'.
13. Repeat steps 6 to 9.
14. Go back to Patron A's account. Both the lost item fee and processing
fee should have been refunded.
15. Repeat steps 6 to 8 (do not check it yet).
16. Go back to Patron A's account. Pay the processing fee.
17. Repeat step 9.
18. Go back to Patron A's account. Both the lost item fee and processing
fee should have been refunded (you'll now be in a credit because the
paid processing fee was also refunded).
Test with lost item - refund_unpaid
19. Go to Administration -> circulation and fines rules. Scroll down to
the default lost item fee refund on return policy. Notice there is now a
refund lost item processing fee policy. Set this to 'refund lost item
processing charge (only if unpaid)'.
20. Repeat steps 6 to 9.
21. Go back to Patron A's account. Both the lost item fee and processing
fee should have been refunded.
22. Repeat steps 16 to 19.
23. Go back to Patron A's account. The lost item fee should have been
refunded but not the processing fee, as this was already paid.
Test with lost item - leave
24. Go to Administration -> circulation and fines rules. Scroll down to
the default lost item fee refund on return policy. Notice there is now a
refund lost item processing fee policy. Set this to 'leave lost item
processing charge'.
25. Repeat steps 6 to 9.
26. Go back to Patron A's account. The lost item fee and processing fee
should have been refunded but not the processing fee.
Other tests
27. Confirm tests pass
- t/db_dependent/Koha/Item.t
- t/db_dependent/Koha/CirculationRules.t
Sponsored-by: Auckland University of Technology
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
1) Apply this patch
2) Run updatedatabase.pl
3) Verify CircControlReturnsBranch is set to home library by default
4) Set a Return policy for Branch A to "Item returns home" ( homebranch )
5) Set a Return polity for Branch B to "Item returns to issuing library" ( holdingbranch )
6) Set a Return polity for Branch C to "Item floats" ( noreturn )
7) Create an item with homebranch of Branch A, holding branch of branch B
8) Log in as Branch C
9) Set CircControlReturnsBranch to "the library the item is currently held by"
10) Check the item in, note it should be returned to the holding library
11) Set CircControlReturnsBranch to "the library the item is owned by"
12) Check the item in, note it should be returned to the home library
13) Set CircControlReturnsBranch to "the library you are logged in at"
14) Check the item in, note it should float
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Holds to pull should not show items from other branches that shares a
record when IndependentBranches is active. Except for superlibrarians.
Test plan:
1- Have IndependentBranches set to Yes
2- Have a record with an item from the current branch and another item from a different branch. We will call them branch A and branch B respectively
3- Have a patron from branch A place a hold on that record
4- Have a staff account on branch A and B with the following permissions:
- circulate (all)
- catalogue
5- Go to circulation > holds to pull
6- Notice under "Libraries" it displays branch A and B. Also, it shows 2 under "Items available"
7- Checkout the item from branch A to another patron
8- Go back to circulation > holds to pull
9- Notice under "Libraries" it displays branch B even though we are in branch A
10- Apply the patch
11- Return the checked out item from step 7
12- Redo step 5 to 9 with superlibrarian privileges and notice nothing changed
13- Redo step 11-12 but using accounts from step 4 and notice Holds to
pull only shows information relevant to their branch
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Replaced the hardcoded 20 by the value of numReturnedItemsToShow to
display the right number of items in check in.
Test plan:
1- Make lots of checkouts, at least like 40 (I used the batchCheckouts feature)
2- Go to Circulation > Check in
3- Return 21 items
The last 20 items returned will be displayed
4- Change numReturnedItemsToShow to 50
5- Return a couple more items
Only the last 20 returned items are displayed
6- Change numReturnedItemsToShow to 10
7- Return a couple more items
Only the last 10 returned items are displayed
8- Apply the patch
9- Change numReturnedItemsToShow back to 20
10- Do steps 1 to 7 again, but this time step 5 returns the right amount
of items
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
With UseCashRegisters syspref disabled going to the page
/cgi-bin/koha/circ/set-library.pl in staff interface and setting a
library gives the following errors in plack-intranet-error.log:
Use of uninitialized value $register_id in string ne at /kohadevbox/koha/circ/set-library.pl line 79.
Use of uninitialized value $referer in pattern match (m//) at /kohadevbox/koha/circ/set-library.pl line 114.
In the if clause $userenv_register_id appears to be typoed, it should have
been $register_id as $userenv_register_id is always defined. As for the
$referer variable, it is undef if there is no referer so let's just initialize
it to an empty string for the regex so it doesn't give the warning.
To test:
1) Go directly to /cgi-bin/koha/circ/set-library.pl by typing it in
the URL bar and set a library
2) Make sure plack-intranet-error.log doesn't contain the above mentioned errors
after applying this patch
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Just drop the import of GetTransfers from circ/transferstoreceive.pl is
it's never actually used.
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the new classes under ::Patron::Restriction:: and
enhances the Unit tests for those classes.
NOTE: We should drop keyed_on_code as part of bug 31095
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The structure of debarments has changes slightly in that the displayed
text is now a product of a call to Koha::RestrictionTypes rather than
just the debarment's code. This patch allows for that
Sponsored-by: Loughborough University
Signed-off-by: Benjamin Veasey <B.T.Veasey@lboro.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes the code dealing with waiting holds with cancellation
requests be dependent on the fact an item has been found.
The returns.pl controller is a bit messy as the real return takes place
outside the main `if ($item)` block. This should be refactored and
probably run inside a transaction...
In the meantime this patch will make the job.
To test:
1. Try to return an invalid barcode (e.g. ASDQWE)
=> FAIL: Things explode
2. Apply this patch
3. Repeat 1
=> SUCCESS: Doesn't explode!
4. Verify that returning an item with a waiting hold with cancellation
requests still cancells the hold.
=> SUCCESS: It does!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The idea rely on the KohaDates TT plugin for the date formatting. We
should not have any output_pref calls in pl or pm (there are some
exceptions, for ILSDI for instance).
Also flatpickr will deal with the places where dates are inputed. We
will pass the raw SQL value (what we call 'iso' in Koha::DateUtils), and
the controller will receive the same value, no need to additional
conversion.
Note that DBIC has the capability to auto-deflate DateTime objects,
which makes things way easier. We can either pass the value we receive
from the controller, or pass a DT object to our methods.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The time part is displayed on the checkout list
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch displays the column "Return claims" from the page "moremember.pl" to the page "overdues.pl". Rebase on master.
Test plan:
1) Use a patron with at least 1 item who should be checked out soon
2) Home > Patron > Patron details for [name]
3) Click on the 'Checkout' button down the page to show the full table and notice the "Return Claims" column
4) Now go to Home > Circulation > Overdues
5) Find the patron who has to check out and have a look at the table
6) Apply patch and repeat 4) and 5) -> the "Return Claim" column is now displayed on the table
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Prior to this patch librarians had to know the cardnumber to search for
patron. Now it's possible to search using the default patron
autocomplete search (name, cardnumber, etc.)
Test plan:
Confirm that you can search for a patron without their cardnumber,
select it and create a curbside pickup
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes checkin process the cancellation requested holds
actually cancel them before moving forward.
To test:
1. Have a waiting hold with a patron generated cancellation request
2. At circulation, check the item in
=> SUCCESS: The workflow follows as if the cancellation requested hold
was already cancelled
=> SUCCESS: The hold is actually cancelled
=> SUCCESS: Not shown in the OPAC anymore
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch introduces a new tab to the 'Holds awaiting pickup' screen
for holds that have cancellation requests. This can be accepted (by
cancelling the hold) or rejected.
To test:
1. Set circulation rules for cancellation requests, allowing them for
certain item type.
2. Have some waiting holds for a patron on an item type that allows
requesting cancellation.
3. Visit 'Holds awaiting pickup'
=> SUCCESS: No holds have cancellation requests
4. In the OPAC, on the user details, notice some holds have the ability
to be requested cancellation.
5. Choose to request cancellation
=> SUCCESS: Request is placed, the button is disabled
6. In 'Holds awaiting pickup' you can see them
7. Play with rejecting/accepting
=> SUCCESS: It works!
8. Things are reflected in the OPAC side
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We actually want one permission to manage the administration page, and
one for the circulation module.
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We could improve this more and add disable the holiday from the date
picker widget, but it's out of the scope here.
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
A bit of cleaning
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is the main commit message.
A plugin already exists to manage curbside pickups. This new
enhancehemnt is suggesting an implementation that is ready to be integrated
into Koha core in order to provide the feature out-of-the-box.
What has been done in this patch set:
- Deal with installations using the existing plugin (upgrade the DB schema and migrate their data)
- Add a new syspref (CurbsidePickup) and two new permissions:
* parameters.manage_curbside_pickups
* circulate.manage_curbside_pickups
- Add an administration page to setup the configuration: admin/curbside_pickup.pl
- Add a circulation page to manage the existing pickups, and create new one
- Add a new OPAC view "your curbside pickups" to let patron manage their pickups, and create new ones
- Add link from the "member" toolbar
Improvements compared to the plugin:
- Ability to create several pickup windows per day
- Better display of the pickup times (not in a dropdown list)
- Ability to disable pickups for patrons without waiting holds
- Display pickups on the patron circulation page
- Display pickups of the library on the homepage
- Prevent pickup to be created on a holiday
- Better error handling (exceptions)
- Unit tests
More improvements are already planned, see related bug reports.
Test plan:
After you setup the feature correctly from the administration view, you
will be able to use the schedule curbside pickups from the staff
interface, and from the OPAC interface if you selected "patron-scheduled
pickup"
A. Staff interface
1. Go to Circulation > Curbside pickups
=> If the logged-in user has the circulate.manage_curbside_pickups
permission you will be able to create and manage curbside pickups
2. Go to a patron detail page and click the "Schedule pickup" button in
the toolbar
3. If the patron has waiting holds and you selected "Enable for waiting holds only",
of if you didn't select the option, you will be able to select a pickup
date and slots to create a pickup.
4. Confirm that you cannot create more pickups per slot than what you
defined in the curbside pickup configuration for this library
5. Confirm that you cannot create a pickup if the feature is disabled
for the library
6. Notice that you can mark the pickup as "stage and ready", then
"patron is outside" and finally "delivered today". You can also rollback
the change
7. Notice that once the pickup has been marked as delivered, the
item has been checked out and that a new notice has been generated (if
the patron has "Hold_Filled" in their messaging preferences
8. Confirm that the information about current pickups is displayed on
the circulation page of the patron
B. OPAC interface
1. Create a new curbside pickup from the OPAC
2. Confirm that the same limitations as from the staff interface are in
effect (waiting holds, number of patron per slots, etc.)
3. Confirm that you can cancel a pickup and alert staff of you arrival
4. Confirm that you cannot cancel a pickup that has been delivered
already
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
