This patch makes the dropdown width inherit the existing style.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the form for placing a hold, use the API to retrieve
the valid pickup locations for a biblio.
To test:
1 - In Circulation and fines rules > Default checkout, hold and return policy, change 'Hold pickup library match' to 'item's home library'
2 - Set AllowHoldPolicyOverride system preference to Allow
3 - Try placing a hold on a biblio with several items.
Ensure that there is one item with homebranch of the patrons branch and
one at another branch
4 - Note the pickup location dropdown lists all branches, even those not matching the policy (Item's home library)
5 - FAIL: There's no sign they are overrides to rules
6 - Apply the patch
7 - Repeat 3
8 - SUCCESS: Same behavior as before all libraires listed, but there's a sign
+ tooltip for overridden ones.
9 - Sign off :-D
Note: styling follow-up coming
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is code in request.tt:
homebranch: "[% ... %]",
holdallowed: [% ... %]
There only digits where expected earlier in holdallowed
but now it can be string value ('from_any_library' for example),
so it should be in quotes.
To reproduce the problem:
1. Add circulation rules which allow 1 hold only to the itemtype
2. Make sure AllowHoldPolicyOverride syspref enabled
3. Make 1 hold to patron for any biblio which has a few items available,
for example on "reset_all dev db set":
/cgi-bin/koha/reserve/request.pl?biblionumber=4&findborrower=1
(this biblio record has 4 items)
4. Start another hold for same patron on any biblio record or the same,
and keep browser's JS console open,
for example on "reset_all dev db set":
/cgi-bin/koha/reserve/request.pl?biblionumber=4&findborrower=1
5. You should see now JS error in browser console:
Uncaught ReferenceError: from_any_library is not defined
Uncaught ReferenceError: columns_settings_borrowers_table is not defined
6. Apply the patch
7. Repeat the steps 4-5 (reload the page) and now the JS error should be gone
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch alters C4/Reserves.pm to pass back 'noReservesAllowed' when
allowedreserves=0. This allows passing to the user an appropriate
message about the availability of items for holds
This patch also fixes a FIXME about using effective_itemtype to fetch item rules
To test:
1 - Set one itemtype to allow no holds
2 - Set 'Holds per record' to 0 for another itemtype/patron combination
3 - Create or find 2 records, each with items only of the itemtypes above
3 - Attempt to place a hold for a patron on each record above
4 - The message will be 'Too many holds'
5 - Apply patch and repeat
6 - Message should be "Cannot place hold: no item are available to be placed on hold"
7 - Try placing a multihold with either record above and a holdable record,
message should end "Cannot place hold on some items'
8 - prove -v t/db_dependent/Holds.t
Rebase - Fix test expectation
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Swapped the order of the page titles to have the unique information
first, i.e. the name of the specific page displays first, and the name of the website (e.g. Koha) displays at the end.
To test:
1) Apply patch
2) Ensure each of the files in the reserve, reviews and rotating_collections folders are swapped around to display the most unique information first, and the website name is at the end
3) Ensure the pages displayed on the Staff Client that correspond to
these files also display the changes
Sponsored-by: Catalyst IT
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Henry Bolshaw <bolshawh@parliament.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch takes advantage of the previous changes, and makes the
select2 dropdown display a warning sign (with a tooltip) on pickup
locations that, if chosen, it would mean a circ rule would be
overridden.
To test:
1. Have some pickup locations that are not valid for existing holds and
AllowHoldPolicyOverride set to "Don't allow"
2. Visit a biblio with some holds
3. Choose a hold that cannot use some pickup location and use the
dropdown
=> SUCCESS: Only valid pickup locations are retrieved
4. Set Allow HoldPolicyOverride to "Allow"
5. Refresh the page (I usually click on the Holds tab)
6 .Repeat 3
=> SUCCESS: All pickup locations in the system are displayed
=> FAIL: No visual feedback on overridden pickup locations :-(
7. Apply this patch and refresh the page
8. Repeat 3
=> SUCCESS: All pickup locations in the systema are displayed
=> SUCCESS: Visual feedback on overridden pickup locations is shown!
9. Set AllowHoldPolicyOverride to "Don't allow"
10. Repeat 3
=> SUCCESS: Only valid pickup locations are retrieved
=> SUCCESS: No overrridden warn/symbol, as expected
11. Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes the "size" attribute from <select> tags where the
value of the attribute is 1. The attribute is unnecessary because the
default value when the attribute is undefined is 1.
This will allow for more careful sizing of <select> tags without a size
attribute while preserving the desired behavior of <select> tags which
have a size greater than 1.
The patch modifies 83 files but makes the same minor corrections to
each. I think examining the diff is sufficent, or testing a
representative set of pages:
- Administration -> MARC frameworks -> MARC structure -> Edit tag:
The "Authorized value" select.
- Patrons -> New patron: The "Library" select.
- Reports -> Patrons with no checkouts: The "Into an
application" selects.
If anyone would like help testing any particular template I can
follow-up.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies instances in the template where variations of "Call
number" are used. Instead of "Call no." "Call no" or "callnumber," "Call
number" is used instead.
To test, apply the patch and test the following pages to confirm that
the label has been correctly updated. In the staff interface:
- Circulation -> Check out to a patron with checkouts -> View the table
of checked-out items.
- Check out to a patron who is guarantor to a patron with checkouts ->
View the table of the relative's checked-out items.
- Catalog -> Bibliographic detail page
-> Holdings table
-> Place hold -> Check "specific items" table
-> Rota (Stock rotation)
- Pending on-site checkouts
- Circulation -> Transfers to receive
- Circulation -> Transfers to send
- Patron -> Patron details
-> Print -> Print summary
-> Circulation history
In the OPAC:
- Log in as a user with checkouts
-> View the checkout tab on the "Your summary" page
-> Your checkout history
In self checkout:
- Log in as a user with checkouts -> View the checkouts table.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies various templates to replace the use of the
"title-string" DataTables sorting method with the newer "data-order"
attribute.
To test, apply the patch and view the following pages to confirm that
columns containing dates sort correctly when using any setting of the
"dateformat" system preference:
- Cataloging -> Edit items
- Easiest to test with an title with many items. You can follow the
"Edit items" link from search results.
- Tools -> Patron lists
- View the contents of a patron list
- Catalog -> Place hold
- Locate a title with multiple items and check out each item with a
different due date.
- Start the process of placing a hold on that title for a patron.
- On the "Place hold" screen, check the table of "specific" items and
test sorting of the "Information" column by date due.
- Tools -> Tags
Signed-off-by: Amit Gupta <amitddng135@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I think the "breadcrumbs" ID is worth saving for past and future CSS
customization reasons.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes minor markup corrections which were introduced by the
previous patches or discovered during testing.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Modified breadcrumbs to be accessible, in particular for a
screen-reader.
Made the block of breadcrumbs be a <nav aria label="Breadcrumb"
class="breadcrumb"> with an ordered list inside. The last breadcrumbs
also has aria-current="page" to specify that it is the current page.
To test:
1) Apply patch
2) Build scss file
3) Ensure each of the files in the reports, reserve and reviews folders
have breadcrumbs that are in a <nav aria label="Breadcrumb"
class="breadcrumb"> block
4) Ensure that there is an ordered list in the block of breadcrumbs
5) Ensure that the last breadcrumb has aria-current="page"
6) Ensure that the breadcrumbs on each page of the staff client
belonging to these files look the same as before, but the '>' symbol
is replaced with '/' and the last breadcrumb has bold text
7) Ensure that when the last breadcrumb is clicked it takes you to the
page you are currently on
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the 'Any library' string translatable, by converting it
into a flag and using it accordingly on the request.tt template.
To test:
1. Have the 'Hold pickup library match' set to 'any library' on the
circultation rules.
2. Open the page to place a hold on a biblio with some items
=> SUCCESS: The item says 'Any library' on the 'Allowed pickup
locations' column.
3. Apply this patch
4. Repeat 2
=> SUCCESS: No behavior change
=> SUCCESS: The string is on the template
5. Sign off :-D
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the dropdown for changing the pickup location for
existing holds use the GET /libraries route instead of GET
/holds/:hold_id/pikcup_locations if the configuration allows the
override.
Terminology:
- Pickup location, means a library that is marked as valid pickup
location on its configuration.
To test:
1. Have the circ rules set so 'Hold pickup library match' is set to
'Item's home library' or 'Any'. The goal is to be able to
differentiate when all libraries are returned, from the case only
'valid pickup locations' are returned. The easiest one is 'Item's
home library'.
2. Set AllowHoldsPolicyOverride
3. Pick a patron from a library that is not a valid pickup location and
an item that belongs to a library that doesn't match any of the valid
ones.
=> SUCCESS: Notice Koha allows you to choose any library (because of the
syspref)
4. Place the hold.
5. Now check on the holds list for the bib, if you can use the dropdown
to change the pickup location for the hold
=> SUCCESS: You can, sort of
=> FAIL: It doesn't show/search all pickup locations. It only shows the
valid ones, even though we should be able to override it.
6. Apply this patch
7. Restart all just in case, and reload the holds page for the bib
8. Repeat 5
=> SUCCESS: You are presented all pickup locations!
9. Sign off :-D
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On the place hold page in the staff interface, add a "_sort_by"
parameter with the "name" value so that the list of libraries is
returned in name order.
To test, apply the patch and locate a title in the staff interface which
has holds on it.
- View the holds information for that title.
- In the table of exising holds, expand the "Pickup library" dropdown
for any of the entries. The list of libraries should be in order by
library name.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves the "$.fn.select2.defaults" definition from the top of
the page to the bottom so that jQuery will be loaded first.
The patch also changes the "dropdownAutoWidth" default so that the
dropdown is sized correctly for its contents, regardless of the width of
the initial <select>.
To test, apply the patch and place a hold in the staff interface for a
title which already has existing holds.
- On the "Place a hold" page, before selecting a patron, you should see
a table of exising holds. Test the "Pickup library" dropdown. It should
work correctly.
- The width of the dropdown should accommodate its contents without
forcing any library name to wrap.
- There should be no errors in the browser console.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test Plan:
1. Open intranet-tmpl/prog/en/modules/reserve/request.tt for ACC2
2. Check for instances of 'input type="number"'
3. If none are found then patch was successful
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the USE TablesSettings directive which allows the plugin
to be invoked to fill the columns_settings_borrowers_table variable.
Test plan:
0. Do not apply the patch
1. Go to http://localhost:8081/cgi-bin/koha/reserve/request.pl?borrowernumber=51&biblionumber=29
2. View source on the page and note columns_settings_borrowers_table has no value assigned
2. Apply the patch
3. In a new tab, go to http://localhost:8081/cgi-bin/koha/reserve/request.pl?borrowernumber=51&biblionumber=29
4. Note that nothing has changed on the surfeace
5. View source ont he page and note columns_settings_borrowers_table now has a value assigned
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On the shoulders of bug 27015, this patch makes the pickup locations
dropdowns use Select2 to handle both fetching the pickup location
on-deman through the API, and also searching for them.
This provides a better user experience for really big lists.
To test:
1. Have some holds on a biblio
=> SUCCESS: Bug 26988 works, made it load the data when you click on the
dropdowns.
2. Apply this patch
3. Reload the page
=> SUCCESS: Similar-ish behaviour
=> SUCCESS: Notice you can search for branch names and make the list
shrink
4. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Place a number of holds on a record
2 - Have different pickup locations for the holds
3 - Have some libraries that are not pickup locations
4 - Load the holds tab for the record and note libraries not pickup locations are not in dropdowns
5 - Apply patch and restart all things
6 - Reload the holds table
7 - Click on a dropdown, note the spinner, should load successfully
8 - Confirm the dropdown matches the options before the patch
9 - Confirm updating the hold location works
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves the functionality contained in biblio-default-view.inc
into biblio-title.inc. biblio-title.inc can now be called with a "link =
1" parameter in order for the title to be displayed as a link which is
controlled by the IntranetBiblioDefaultView preference.
To test, apply the patch and test the affected pages, especially titles
linked to in breadcrumbs menus
Acquisitions:
- Add to basket -> From existing record -> Search
- Title in search results
Catalog:
- Search for a record
- Add record to cart
- Open cart
- Title in brief display
- Check that link opens the correct page in the main window
- View bibliographic record
- ISBD view
- MARC view
- Normal view
- Local cover image detail page
- Checkout history
- Request article
- Item details
- From the "Edit" menu -> Attach item
- Stock rotation rota
- Place hold
Cataloging:
- Cataloging search -> Search results
Circulation:
- Article requests
- Overdues with fines
- Overdues
- Holds queue
- Holds to pull
- Hold ratios
- Holds awaiting pickup
- Transfers to recevie
- Renew
- Batch checkout
Lists:
- View list contents
Patrons:
- View patron details
- Holds history
- Checkout history
Tools:
- Rotating collections
- View collection
- Add item
- Tags
- Click term to see titles tagged with that term
- Batch record deletion
- Submit batch
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Same as previously
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
From the template we are assuming that items.notforloan is mapped with
the NOT_LOAN authorised value category, but that is not necessarily the
case.
We must retrieve the correct AV category
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Wrong line ending in JSON causes error:
Uncaught SyntaxError: missing } after property list
note: { opened at line 29579, column 15
To test:
1 - Have a title with some items not for hold in staff interface
2 - Set AllowHoldPolicyOverride to 'Allow'
3 - Attempt to place hold on the title
4 - Note JS error in the console and datatable does not load for items
5 - Apply patch
6 - Reload
7 - Error is cleared, table loads correctly
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
- Remove the unordered list added to the holds list Details column
- Switch div to span to have the hint appear behind the checkbox
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch
* sets one check for reserves and another for old_reserves in
atomic update
* Adds a message below the checkbox and adds detail when a hold is non
priority
* Fixes issue when there are more than one hold, but the first is non
priority
* Adds test case for this last scenario
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch implements necesary code to implement non priority feature
To test:
1) Apply all patches.
2) Run updatedatabase.
3) Checkout a specific item for patron1.
4) Place a hold on the same item for patron2 (do not check non priority
hold checkbox).
5) Try to renew the item for patron1.
CHECK => in checkouts table, there is a message that the item could not
be renewed because there was a hold.
6) Cleanup all checkouts and holds.
7) repeat steps 3 to 5, but this time check the non priority checkbox.
SUCCESS => item was renewed
8) prove t/db_dependent/Holds.t
Signed-off-by: Lisette Scheer <lisettes@latahlibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some libraries would like to be able to cancel a hold with the option to
specify a reason. Providing a reason would generate an email to that
patron.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Restart all the things!
4) Create new AV category "HOLD_CANCELLATION", add some cancelation reasons
5) Add new Holds module notice "HOLD_CANCELLATION", add an email version.
A quick test version would be "Reason: <<reserves.cancellation_reason>>"
--
[% USE AuthorisedValues %]
Reason: [% AuthorisedValues.GetByCode( 'CANCELLATION_REASON', hold.cancellation_reason, 'IS_OPAC' ) %]
[% IF hold.cancellation_reason == "MY_AV_VALUE" %]
IF perhaps you'd like to have a much longer explanation than just the
one sentence in the AV description, you can use IF blocks using Template
Toolkit markup!
[% END %]
--
6) Place a hold for a patron
7) On request.pl, select the 'del' option for the hold
8) Select a cancellation reason and choose "Update hold(s)"
9) Note a new message has been queue for the patron with the cancelation reason
11) Test again from circulation.pl
12) Test again from moremember.pl
10) Cancel a hold with no reason, note no email is generated
11) Delete your authorised values, not the feature is disabled
12) Reinstate the authorised values, but delete the notice,
you should now be able to cancel a hold with a reason,
but no email will be generated
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a floating toolbar to the holds summary page in the staff
interface.
To test, apply the patch and view the holds page for a title with
multiple holds on it. Test that when you scroll down past the position
of the "Update hold(s)" button, the toolbar "sticks" to the top of the
screen.
Test that holds are updated correctly after clicking the "Update
hold(s)" button.
Signed-off-by: Emmi Takkinen <emmi.takkinen@outlook.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes minor changes to the markup of the holds list to make
the page hierarchy clearer when holds are grouped by branch and
itemtype.
Test plan:
- Enable the AllowHoldItemTypeSelection system preference.
- Locate a record in the catalog and place multiple holds:
- Holds at different branches
- Holds with different itemtypes selected
- View the holds page with various values of the HoldsSplitQueue
preference enabled:
- nothing
- pickup library
- hold itemtype
- pickup library & itemtype
In each case verify that the interface works well.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Emmi Takkinen <emmi.takkinen@outlook.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
By adding an id the checkbox is selected when the label is clicked
enhancing usability.
Also adds a colon : to the label.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a checkbox to make holds created by club hold to default to patron's home branch if possible.
To test:
1. Apply this patch
2. Create a club, and add two patrons (from now on called patron A and patron B) to it, each one form a different library..
3. Create a hold for the club, and in the details set pickup location different from any of the patrons.
4. Check "Pickup at patron's home library when possible" checkbox
SUCCESS => when submitted, pickup location of holds defaults to patron's home branch
5. Modify patron A's library and set pickup location to no.
6. Repeat steps 3 and 4.
SUCCESS => when submitted, patron A's hold now points to pickup location setted on step 3, and patron B's hold still points to his home branch.
7. Sign off
Sponsored-by: Southeast Kansas Library - SEKLS
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We are preparing the ground with this patch. As the "Columns settings"
page will now add the ability to modify settings for the whole table, it
makes sense to rename the file and the variables.
Note that the controller script (admin/columns_settings.pl) and the yml
(admin/columns_settings.yml) files have not been moved to not break
shortcuts and abits people could have. But if QA decides, it could be
easy to do.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There was a bug, on the biblio's hold list view, if the pickup library
was changed, the next screen was "place a hold for no title"
http://pro.kohadev.org/cgi-bin/koha/reserve/request.pl?multi_hold=1&biblionumbers=
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If a hold is selected from the result list, we should let the ability to
select an item-level hold.
Test plan:
I. Detail page
1/ Go to a bibliographic record detail page
2/ Click "Place hold"
3/ Select a patron
=> No change expected, you can select an item
II. Search result, multiple holds
1/ Search for an item with more than one search result
2/ Select several items, click 'Place hold'
3/ Enter a patron card number
=> No change expected, item level holds are not available.
III. Search result, single hold
1/ Search for an item with more than one search result
2/ Select only one item, click 'Place hold'
3/ Enter a patron card number
=> With this patch applied, item level hold is available. The screen is the same
as when you place a hold from the bibliographic record detail page
=> Without this patch you cannot place an item-level hold
QA notes: We could go a bit further and remove the 2 biblionumbers and
biblionumber from hold script, as well as remove the checkMultiHold in
request.tt. We should not have a biblionumbers param that contain a list
of biblionumber separated by '/' but several biblionumber parameters
instead.
QA notes 2: About placerequest.pl, see bug 19618 comment 27.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When placing a hold in the staff interface, the heading on the
search box reads: Search Patrons or clubs
The patch changes it to be Search patrons... instead.
Also changes club id to club ID.
To test:
- Place a hold in the staff interface
- Verify the capitalization error
- Switch tabs to Clubs, see: club id
- Apply patch
- Verify it's all good now
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Additional test plan:
Create 3 clubs: abc adf axy
place a hold for on of those club, search for a club 'a'
you will get the focus on the "Clubs" tab
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This alternate patch tries to implement a fix in a more "correct" way by
tying the cursor focus to the initialization of the jQueryUI tabs. By
configuring both the "create" and "activate" events we can make sure the
correct input field is focused.
I think the only advantage of this patch over the other one is that
tying the focus to the tabs activation makes it a little more obvious
where in the DOM loading sequence the focus is being set.
To test, follow the original patch's test plan:
TEST PLAN:
1. Go to Biblio Record
2. Place Hold (request.pl) - either the Hold above the Bib or the Hold
on the left, it does the same thing.
3. Note that the cursor does not go to Patron Name (for whom to place
the hold for), it goes to the Top Search bar under Checkout.
4. Apply patch and reload the page.
5. The focus should now be correctly set.
6. Toggle between 'Patrons' and 'Club' tabs.
7. Focus should stay set.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch updates some markup and CSS so that the process of selecting
a club from search results during the hold process looks the same as
when selecting a patron: Club names should be links (like patron
names are) and the table row should have a hover color to help indicate
that it is clickable.
This patch also changes the markup of the Patrons/Clubs tabs a little
bit to make the information clearer: Superfluous Bootstrap-related tab
markup has been removed, and the patron and club search results have
been moved into their respective tab containers. This means that if you
search for a patron but then switch to the clubs tab the patron list
doesn't still display.
To test, apply the patch and rebuild the staff client CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client)
- You should have more than one patron club defined.
- Begin the process of placing a hold on a title.
- Test the process of searching for both patrons and clubs.
- In each case the name (patron or club) should be an active link.
- Hovering your mouse over the table rows should change the row
background to yellow.
- Clicking the other tab at this stage should hide the search results
from your last search.
- Whether you click the linked name or elsewhere in the table row
you should be correctly redirected to the next step in the holds
process.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
Use quotes in a library's name, then place an item on hold for a patron
that cannot do it.
If you are allowed to overwrite this restriction you will get a warning:
"This item normally cannot be put on hold except for patrons from
BRANCHNAME"
The library's name should be correcty displayed
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 19618 replaces the call to placerequest.pl with a REST API /holds
That is wrong as it does not support multi holds.
Test plan:
Confirm that prior to this patch you are not able to place a hold on
several records at once, and that this patch fixes it
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Same as bug 22021 for the withdrawn status.
1. Withdraw an item
2. Place an hold on this item
Notice the new "withdrawn" status in the information column
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This follow-up adds the correct markup to the second of two "Place hold"
buttons so that it is disabled when the first is disabled.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The patch modifies the markup and CSS related to the holds template in
the staff client when holds policy override is necessary. The CSS
background image is replaced with a Font Awesome icon. <input>s are
replaced with <button>s to allow for the icon markup.
To test, apply the patch and regenerate the staff client CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Enable the AllowHoldPolicyOverride system preference.
- Start the process of placing a hold for a patron on a title which
would not normally be available for hold. For instance: The patron
already has too many holds.
- On the hold confirmation screen the "Place hold" buttons should
appear with a little yellow "warning" icon.
- Clicking either of the two "Place hold" buttons should trigger a
confirmation dialog. Test both the "Confirm" and "Cancel" options.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a new message to 'Hold' column in 'Place a hold on a specific item' table.
The message is "Cannot place hold from patrons's library". It appears when patron's homebranch is not in item's hold group, and hold_fulfillment_policy is set to 'holdgroup'.
This patch also adds a new column "Allowed pickup locations" that lists allowed pickup locations per item.
Finally, the select that displays pickup locations is filtered by allowed pickup locations, when multi_hold is not enabled
To test:
1) Apply this patch
2) In library groups add a root group and check it as hold group.
3) Add two libraries to the group
4) In circulation and fines rules, in 'Default checkout, hold and return policy', in Hold policy change the value to 'From local hold group'
5) Search a patron from a different library than step 3, select one and click 'search to hold'
6) Search by location for items in any library of step 3
7) On any item, clic on 'Place hold for ...'
SUCCESS => when the page is loaded, in the 'Place a hold on a specific item', you should see the message "Cannot place hold from patrons's library" in 'Hold' column
=> You should see a new column called "Allowed pickup locations" and the message is "Any library"
8) In circulation and fines rules, in 'Default checkout, hold and return policy', in 'Hold policy' change the value again to 'From any library' and change 'Hold pickup library match' to "Item's hold group"
8) Repeat steps 5 to 7
SUCCESS => when the page is loaded, you should see the "Pickup at" select filtered by libraries in hold group
=> You should see in "Allowed pickup locations" a coma separated list of the libraries in item's hold group
=> If biblio has an item whose control branch is not in a hold group, you should see the control branch name in "Allowed pickup locations"
9) Sign off
Sponsored-by: VOKAL
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Just a find and replace on the changed system preference name.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
- Rename CircAutocompl system preference to PatronAutocompletion
- Take this system preference into consideration for patron search
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch effectively uses API to place holds for patrons. It adds a listener on submit event of the form in javascript, where it calls holds API.
To test:
1. Place a hold on any biblio for a patron
SUCCESS => hold is placed or rejected, but no blank page with JSON error is shown.
2. Place a multi hold for any patron
SUCCESS => holds are placed or rejected, but no blank page with JSON error is shown.
3. Sign off
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds an endpoint in thi api in /api/v1/clubs/{club_id}/holds whith the verb POST that maps to Koha::REST::V1::Clubs::Holds#add controller.
Classes for club_holds and club_holds_to_patron_holds new tables where also added.
To test:
1) Reach SUCCESS.3 test point of previous patch with club that has no enrollments
2) Click on "Place Hold"
SUCCESS => an alert should appear that you cannot place hold on a club without patrons
3) Reach SUCCESS.3 test point of previous patch with club that has enrollments
4) Click on "Place Hold"
SUCCESS => holds priority list should appear with holds for every patron in club
5) Repeat steps 3 and 4.
SUCCESS => new holds should appear in different order
6) Sign off
Sponsored-by: Southeast Kansas Library - SEKLS
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the ability to place a hold for each member of a club in random order.
To test:
1) apply this patch
2) create 2 clubs, (club names should have some part in common, and some part different for each other)
3) in one of them add at least 6 members
4) enter patron clubs management and click on "Actions" button
SUCCESS.1 => club with members has a new action called "search to hold"
5) click on search to hold
SUCCESS.2 => in the list of bilios there appears an action called "Place hold for <club name>"
6) click on "Place hold for <club name>"
SUCCESS.3 => a new window appears where you can select pickup location (defaults to club's library, if any), and the list of members.
7) go back to the list of bilios in the catalog and click on "Forget <club name>"
8) click on "Holds" action of any biblio
SUCCESS.4 => a search box appears with two tabs: Patrons and Clubs
9) click on Clubs tab and search by the common part of clubs names
SUCCESS.5 => a list of clubs that matches the search appears. If you click on any of them, the same page as SUCCESS.3 appears.
10) go back to the search box in SUCCESS.4 and search by the different part of the name.
SUCCESS.6 => because there is only one club that matches search criteria, the same page as SUCCESS.3 appears;
11) Sign off
Sponsored-by: Southeast Kansas Library - SEKLS
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a few comments to the markup in order to highlight the
structure of the page.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch reindents reserve/request.tt to use four spaces and
to eliminate tabs, following coding guidelines. Trailing white space has
been removed.
To test, apply the patch and use your preferred method for checking the
differences between files while ignoring whitespace. I use diff with the
"-w" flag, but I'm no diffctator.
Test the process of placing a hold in the staff client: A single hold,
multiple holds, etc. Everything should work correctly.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch removes the "onsubmit" attribute from the place hold form.
To test, apply the patch and test placing a hold:
Begin the process of placing a hold on a single title. On the
place hold screen, uncheck the "Hold next available item" checkbox and
click the "Place hold" button.
You should be get an alert saying "Please select an item to place a
hold." Select an item and click the "Place hold" button again. The hold
should be placed.
This patch affects the form validation for placing multiple holds, but I
don't think the JavaScript ever has a chance to run: The template blocks
the user from placing multiple holds if one of the titles has no items.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
My orginal patch for this bug contained a lot of changes made obsolete
by Bug 19469, which created holds_table.inc.
This new version makes one minor change only to request.tt, adding a
class name and removing an onclick attribute.
To test, apply the patch and place an item-level hold on a title.
Start the process of placing another hold on that item. On the "place
hold" screen, in the table of items, you should see a "Cancel hold" link
for the item you previously placed on hold.
- Click the "Cancel hold" link
- Clicking "Cancel" in the confirmation dialog should cancel the
operation.
- Clicking "OK" should cancel the hold.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Unify and clean up subtitle usage so that it's always used as a simple array and not the old hash structure.
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch is a bit of a clean-up to bring the item status display
more in line with the display on the detail page:
- show descrpition of authorised value for not for loan instead of hardcoded text
- Show description of authorised value for lost instead of hardcoded text
This is also a translatability fix, as the text came from the .pl
- Show description of authorised value damaged instead of hardcoded text
- Make sequence of status match display on details page:
lost - damaged - not for loan
To test:
- On a record with multiple items
- Add different status to the items
damaged, lost, not for loan
- Make sure you have items with one status and multiple status at the same time
- Look at how the status display on the detail page
- Place a hold, compare display
- Apply patch
- Repeat
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Enable the CheckPrevCheckout and DisplayMultiPlaceHold system preferences
2) Have a patron with some checkouts history
3) Try to place hold on one of titles from history for this patron
4) You should see an information at the top of confirm request page, but
you still should be able to place a hold
5) Try this with multiple titles - one or more of them should be from
history
6) You should see this information in "Information" column
7) There is also new column placed at the beggining with checkbox, you
could uncheck it for titles you do not want to place a hold on it
8) Confirm the hold is placed only on checked titles
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Bin Wen <bin.wen@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch corrects a missing id on the holds_to_place field and adds code to disable the box when an item is checked
Additionally script login now places a single hold if an itemnumebr is passed and checks for holdability of the specific item
To test:
1 - Allow multiple holds per record in circ rules
2 - In staff client, go to place a hold on a record
3 - Select a patron
4 - Increase the number of holds
5 - Then select a specific item to hold
6 - Patron now has multiple holds on a single item
7 - Apply patch
8 - Repeat, notice that count is disabled when item checked
9 - Confirm count is enabled when 'Hold next available item' is checked
10 - Set number to more than 1
11 - Check an item and submit
12 - Confirm only one item is reserved
13 - Hit the script directly (with valid info):
http://localhost:8081/cgi-bin/koha/reserve/placerequest.pl?biblionumber=1&checkitem=1&holds_to_place_count=2&borrowernumber=5
14 - Confirm only one hold is placed
15 - Confirm multiple hits of the url do not generate further holds
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes a few markup corrections to the holds template in the
staff client: Replace some YUI markup with Bootstrap; Replace invalid
"alt" attributes with "title."
To test, apply the patch and test the process of placing a hold, both
single and multiple holds. At each step of the process the page should
look correct and adjust well at various browser widths.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Branch transfer limits are respected for placing holds in the OPAC but nowhere else. This should be remedied.
Test Plan:
1) Set up a branch transfer limit from Library A to Library B
2) Verify you cannot set up a hold for an item from Library A for pickup at Library B from the staff interface ( without overriding )
3) Verify you cannot place that hold via ILS-DI
4) Verify you cannot place that hold via SIP
4) Verify a forced hold from Library A to Library B will not show up in the holds queue
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds columns configuration to the holds request page to fix a
JavaScript error in the console and to allow the patron search results
table to be enabled as a DataTable.
To reproduce: Place a hold on a title in the staff client. When prompted
for a patron, perform a search which will return multiple results. The
patron search results will appear in an unsortable table. A JS error can
be seen in the browser console.
To test, apply the patch and repeat the steps above. The patron search
results table should be sortable and there should be no JS error.
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Bin Wen <bin.wen@inlibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
DataTables are used on enough pages in the staff client that it
doesn't make sense to put inclusion of the CSS into each template
where it is needed. This patch moves includes of datatables.css from
individual templates into the global header file.
To test, apply the patch and view various pages which have DataTables.
View various styles of DataTables, e.g.
- Full pagination, like item search results
- Four-button, like Saved SQL reports
Everything should look the same as it was.
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
In a production system, you don't usually search for the same
patron over and over, so there's no sense for the browser
to save a list of searched patrons in the patron quick
search. Therefore, should set autocomplete=off for that
input field.
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Displays amount outstanding correctly when holds are blocked
by maxoutstanding.
To test:
- Check maxoutstanding system preference value
- Add a fine to a patron account exceeding maxoutstanding
- Try to place a hold for this patron from staff
- Verify this message is shown:
Patron has outstanding fines: 6.00
- Toggle CurrencyFormat system preference and verify display
changes according to setting
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Mikael Olangcay Brisebois <mikael.olangcay-brisebois@inlibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 13618 took care of the KohaDates output but not if it is called
with a parameter (eg. [% var | $KohaDates with_hours => 1 %]).
We could avoid unnecessary processing by removing the extra html filter.
Patch generated with the following command:
% perl -p -i -e 's/KohaDates([^%\|]*)\s?\|\s?html\s?/KohaDates $1/g' **/*.inc **/*.tt
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch disables the dropdown for found holds, and adds a new button
to revert the waiting status, setting the hold to priority 1
Additionally we remove some changes from 19469 and update the JS to skip
found holds when updating priority
To test:
1 - Find a record with multiple items
2 - Place 4 holds (or more)
3 - Capture one ohld as waiting, one as in transit
4 - View the holds on the record - switch the last to priority one
5 - Waiting and transit statuses get confused
6 - Apply patch
7 - Observe dropdown is now disabled for waiting holds
8 - Confirm other holds operate as expected
9 - Confirm 'Revert found status' resets hold
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 21608: (follow-up) Use RevertWaitingStatus and do not alter _FixPriority
[EDIT]
Completely removed the changes to Reserves.pm by adding module prefix in
the request.pl script.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds two missing template filters as pointed out by the
template test.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a new collection column to the item table when selecting
a specific item for a hold. The column will only appear if at least
one item has a collection set.
To test, in staff:
- Place a specific hold on
- a record with one or more items with collections
- a record with one or more items without collections
- Verify the collections display correctly when they exist
- Verify the table still works as expected
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch has been generated with the script provided on bug 21576.
It only affects variable used in the href attribute of a link *when*
href it the first attribute of the node (grep "a href")
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes reserve/request.pl display a convenient error
description when a hold cannot be placed due to the new daily limit
configuration.
To test:
- Apply this patchset
- Upgrade
- Configure your circulation rules so there's a daily limit for holds
- Place holds so the patron reaches the maximum
- Place one more hold
- Notice the hold cannot be placed and a convenient error message is
displayed.
- Sign off :-D
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Correct the two issues I pointed out.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It is possible to set up circulation rules to limit trapping of holds by pickup library and itemtype.
To make it easier to understand which holds will be trapped in a given circumstance,
it would be nice if we could optionally group holds by pickup library and/or itemtype.
Test Plan:
1) Apply this patch set
2) Run updatedatabase.pl
3) Enable AllowHoldItemTypeSelection
4) Pick a record and create holds with various pickup libraries and itemtype combinations
5) Enable HoldsSplitQueueNumbering
6) Try the different combinations of HoldsSplitQueue
7) Ensure the hold "arrows" move the items correctly
* Up and down arrows should move hold above or below the adjacent hold within a hold fieldset
* Top and borrom arrows should move hold to the top or bottom within a hold fieldset
Sponsored-by: Stockholm University Library
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Followed test plan, patch worked as described. Also passed QA test tool
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Sponsored-by: Stockholm University Library
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passed QA test tool
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch sets request.tt to use the list of pickup libraries instead
of every library in the system.
To test:
1. Go to cgi-bin/koha/admin/branches.pl
2. Configure one of your libraries to "Pickup location" => "No"
3. Go place a hold in intranet
4. See the provided "Pickup at" list
5. Observe the library that you configured is not present in the list
6. Place the hold
7. See list of existing holds on that biblio
8. See "Pickup library" column and observe your configured library is
not included in the list
Signed-off-by: Koha Team AMU <axelle.clarisse@univ-amu.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>