On bug 29844 we decided to remove wantarray from Koha::Objects->search.
Reviewing the difference occurrences I found some unnecessary uses of ->as_list,
where iterators should be used instead.
This patch only removes the obvious places, not the tricky ones.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Some more cases found using
$ git grep '\->search(' | grep -v -e '\->as_list' -e '\->get_column' \
| grep '@'
and then manually looking at them.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
and some more...
There are lot of inconsistencies in our ->search calls. We could
simplify some of them, but not in this patch. Here we want to prevent
regressions as much as possible and so don't add unecessary changes.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
JD amended patch: remove ref to line number
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
check_cookie_auth is assuming that the user is authenticated if a cookie exists
and that the login/username exists in the DB.
So basically if you hit the login page, fill the login input with a
valid username, click "login"
=> A cookie will be generated, and the sessions table will contain a
line with this session id.
On the second hit, if the username is in the DB, it will be enough to be
considered authenticated.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the sandboxing of the selfcheckout more robust by
adding a "sco_user" session variable which is turned on when
logging into the self-checkout (either by AutoSelfCheckAllowed or manually).
If a user with this session variable turned on tries to access
other parts of the system (like the rest of the OPAC), it will
"kick out", so that the browser user will lose the authenticated session.
Test plan:
1) Apply the patch
2) koha-plack --restart kohadev
3) Go to http://localhost:8080/cgi-bin/koha/sco/sco-main.pl
4) Note that you are logged into the self-checkout
So you see the login screen specific to the self-checkout.
To log with the actual patron. It's a nested auth.
5) Go to http://localhost:8080/cgi-bin/koha/opac-main.pl
6) Note that you are not logged into the OPAC
7) Log into the staff interface and disable the
system preference AutoSelfCheckAllowed
8) Log out of the staff interface (this step is very important)
9) Go to http://localhost:8080/cgi-bin/koha/sco/sco-main.pl
10) Note that you are prompted to log into Koha
11) Login using the "koha" user (when using koha-testing-docker)
12) Note that you are logged into the self-checkout
13) Go to http://localhost:8080/cgi-bin/koha/opac-main.pl
14) Note that you are not logged into the OPAC
Without the patch you would still be logged as "koha"
15) Go back to http://localhost:8080/cgi-bin/koha/sco/sco-main.pl
16) Note that you will need to log in again as you've lost your
session cookie
Without the patch you will still be logged in the self-checkout
Voila!
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch fixes tests failures due to bad checks in the controller.
The tests deserve to be rewritten.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Most of the changes here are simple, this can be read to view the changes
Testing that holds can be placed via staff client, and opac, and are disallowed
when expected is the best test plan, beyond running the unit tests
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Opac: On a record(Serials) details the location wasn't displayed on the "Normal view" and "Full history" tabs
Test plan:
1)Intranet: Make sure to have at least two different Serials/Subscriptions on the same record with the field 'location' filled in
2)Opac: Find your Serials/Subscriptions
3)Click 'More details' and notice the 3 tabs : Normal view, Brief history, Full history
4)Go to 'Normal view' and 'Full history' to notice that 'location' is missing
5)Apply patch, refresh your browser & repeat 4)
6)The location is now visible
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Providing the call number for ILS-DI GetAvailability output is useful
for libraries that use discovery tools. Patrons often don't check
further for the call number, and then they don't have it when they look
for the item. It could also be use full to have this call number when
the item isn't available (to make a request for it for instance).
Test plan:
1. Enable the ILS-DI system preference
2. Locate a record with multiple items and make sure they have call
numbers for each item and that some are unavailable
3. Test these URLs:
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[BIBLIONUMBER]&id_type=biblio
and
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[ITEMNUMBER]&id_type=item
(Where the [OPACBASEURL] is the OPAC URL of your test instance,
[BIBLIONUMBER] and [ITEMNUMBER] are a record number and item number of
your choice.)
4. Apply the patch
5. Run the queries from step 3 again - all the results should now have
the tag itemcallnumber (not only the available's ones)
Example: <dlf:itemcallnumber>840.08 COR R</dlf:itemcallnumber>
Sponsored-by: University Lyon 3
https://bugs.koha-community.org/show_bug.cgi?id=28238
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The expiration date picked by the patron (or librarian) when placing a
hold is lost when a waiting hold is reverted.
We need a separate DB field to store this value and restore it when
needed: patron_expiration_date
The new behaviours are now:
Create a hold and specify an expiration date:
expirationdate=patron_expiration_date
Fill the hold:
expiration_date is calculated
expiration_date set to the calculated value or to
patron_expiration_date if anterior
patron_expiration_date not modified
Revert the waiting status:
expirationdate set back to patron_expiration_date
Cancel expire reserves:
if < expirationdate OR < patron_expiration_date
Note: This change should not be needed but won't hurt
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Florian Bontemps <florian.bontemps@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If you do not use a temporary self registration patron category,
you should actually make the preference
PatronSelfRegistrationExpireTemporaryAccountsDelay empty.
As the comment in sysprefs.sql already said, we should not let
a zero value in the pref delete patrons too.
The module is changed now, the test adjusted and
the description of both related sysprefs modified.
Test plan:
Run t/db_dependent/Members.t
Check in Administration the two adjusted OPAC pref descriptions.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If we simply return "no" immediately from the function when the
checkout is not an autorenewed checkout we can drop one layer of
indendation and the code becomes much easier to read.
To test:
1) prove t/db_dependent/Circulation.t
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The too_soon check does not relate at all to auto-renewed issues and
should be moved outside the _CanBookBeAutoRenewed() function.
To test:
1) prove t/db_dependent/Circulation.t
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch allows us to avoid checking reserves when the issue is
too_soon and we are running the cron
Code is covered by existing tests
To test:
1 - prove -v t/db_dependent/Circulation.t
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If a checkout with auto-renewal enabled doesn't have a
"norenewalbefore" circulation rule set the code in CanBookBeRenewed()
falls back to using due date (to verify this please look for the
string "auto_too_soon" in C4/Circulation.pm), the calculation result
of GetSoonestRenewDate() however didn't do this, though luckily it was
not used in CanBookBeRenewed so we didn't get any issues
there. However, GetSoonestRenewDate() is used for displaying the
soonest renewal date in the staff interface on the circ/renew.pl page
so you would have gotten wrong results there.
This patch moves additionally the tests made for Bug 14395 under a new
subtest for GetSoonestRenewDate() as they should have been like that
already before.
To test:
1) prove t/db_dependent/Circulation.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch reuse the (awesome) Koha::Result::Boolean module to retrieve
the return of Koha::Item->safe_to_delete.
Test plan:
Try to delete an item that has previously been checked out and confirm
that you are still blocked.
Try using the cronjobs, the item and biblio detail pages, as well as the
batch delete item tool.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
Set item level itypes to biblioitems.
Find a record with itemtype NULL, having an item.
Place a hold. Without this patch, it crashes.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: ThibaudGLT <thibaud.guillot@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the cataloging reservoir search results a configurable
DataTable. The empty edition and date columns are removed, and an import
data column is added.
To test, apply the patch and go to Cataloging.
- Perform a cataloging search which will return results from the
reservoir.
- The table of reservoir search results should be a DataTable with
paging, navigation, filtering, column configuration, etc.
- Confirm that all DataTable controls work correctly.
- Go to Administration -> Table settings -> Cataloging -> addbooks.
- Try modifying the default configuration and confirm that the
settings take effect.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The selector is not correct, we must to not rely on the number.
This patch fixes a regression caused by bug 28445, but also a
long-standing bug.
* Regression:
The barcode plugin is broken is autoBarcode=<branchcode>yymm0001
There is a JS error in the console:
Uncaught TypeError: form.field_value is undefined
Focustag_952_subfield_p_878344
Focustag_952_subfield_p_878344_handler
jQuery 11
BindEventstag_952_subfield_p_878344
* Long standing bug:
If there are several item forms on the same page, the branchcode is not
correctly retrieved. For instance on the "Serial edition" page there are
2 item forms, the homebranch that is used by the barcode plugin will be
the one from the last form.
Test plan:
* regression
Set autoBarcode=<branchcode>yymm0001
Catalogue a new item, click into the barcode input
Notice that without this patch you get a JS error in the console
* long standing bug
Create a new subscription, select "Create an item record when receiving this serial".
Receive a serial
Open the 2 item forms ("Click to add item")
Select 2 different home library and click the barcode inputs.
The prefix (branchcode) should be correct with this patch applied.
QA Note: it would be way easier if all add item forms were using the new
methods, it could be:
let loc = document.getElementsByName('items.homebranch')[0].value;
Yes, that's all!
Signed-off-by: Hayley Pelham <hayleypelham@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Wrong key 'xsl_filename' is present in opac-tags.pl and shelves.pl
(the only places where it is used in the code even) instead of
'xsl_syspref' that is actually used and this is the cause of those
warnings.
Also added honeypot to check if other calls in same way happens.
Honeypot probably not needed, review when QA in the Community.
To reproduce (shelves.pl):
1) Prepare some test list with items or use existing one.
2) Go to the lists page (koha/virtualshelves/shelves.pl),
notice multitude of new warnings in the "intranet-error.log" log file
that mostly have to do with "Use of uninitialized value $xslsyspref".
3) Apply the patch.
4) Go back to same page and check it again, warns like that should not
appear in the log file anymore.
To reproduce (opac-tags.pl):
1) Go to the "my tags" page in OPAC and open "tag cloud".
2) Notice a bunch of new warnings in the log file that mostly have to
do with "Use of uninitialized value $xslsyspref".
3) Apply the patch.
4) Reload the page and check the log file again.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch moves C4::Biblio::GetMarcAuthors to
Koha::Biblio->get_authors_from_MARC. This is so the method can be
used in templates and notices.
To test:
1. Find a record that has an author in the added entry field (700-720).
2. Add the record to the cart and a list.
3. View your cart and click 'more details'. Confirm authors show as
normal.
4. Click 'send' and confirm the email sent shows the authors as normal.
5. Go to the list you added the record to and click 'send list'. Confirm
the email sent shows the authors as normal.
xslt)
6. Log in to the OPAC. Find the record and add it to the cart and a list
7. View the cart and click 'more details'. Confirm authors show as
normal.
8. Click 'send' and confirm the email sent shows the authors as normal.
9. Go to the list you added the record to and click 'send list'.
Confirm the email sent shows the authors as normal.
10. Confirm tests pass:
- t/Biblio.t
- t/db_dependent/Koha/Biblio.t
Sponsored-by: Bibliotheksservice-Zentrum Baden-Württemberg (BSZ)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
DelSuggestionsOlderThan is on "date", a timestamp. It can be a problem
because "date" is updated when we update the database, in consequences
all the suggestions take the same date.
This patch use 'manageddate' instead.
In order to test this patch, you will need to have some suggestions
where "Managed on" (suggestions.manageddate in the database) is older
from "Last updated" (suggestions.date in the database). This can append
during some specific update. If you don't have such data, you will have
to add them via SQL request.
Example of sql for insertion (ID is the patron id of a librarian which
can manage suggestions):
INSERT INTO suggestions (suggestedby, suggesteddate, managedby,
manageddate, acceptedby, accepteddate, STATUS, title) VALUES (1,
'2020-10-13', 1, '2020-10-26', 1, '2020-10-26', 'ACCEPTED', 'title');
Test plan:
1- Choose a date and find (or add) a suggestion where:
- "Last updated" is not older than this date
- "Managed on" is older than this date
- "Status" is different from "Pending" ("ASKED" in database)
Calculate number_days = today's date - chosen date
Example: (Today's date 28/10/2021, chosen date : 28/10/2020,
number_days=365)
Suggestion | .. | Managed on | .. | Last updated | .. | Status
title | .. | 10/26/2020 | .. | 05/15/2021 | .. | Accepted
2- Run cron job
/home/koha/src/misc/cronjobs/purge_suggestions.pl --confirm --days number_days
3- Check that this suggestion has not been deleted
4- Apply the patch
5- Repeat steps 1 and 2
6- Check that this suggestion has been deleted
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
- run prove t/00-load.t, see error
- apply patch
00:07:08.189 koha_1 | # Failed test 'use C4::SIP::Sip::Configuration;'
00:07:08.189 koha_1 | # at t/00-load.t line 46.
00:07:08.189 koha_1 | # Tried to use 'C4::SIP::Sip::Configuration'.
00:07:08.189 koha_1 | # Error: "uniq" is not exported by the List::Util module
- run prove t/00-load.t, see tests pass :0)
https://bugs.koha-community.org/show_bug.cgi?id=29478https://bugs.koha-community.org/show_bug.cgi?id=29564
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The code in the script and the module attempt to determine whether a term is an isbn, or not. Rather
than try to do this, we can simply search it on the three fields: isbn, title, author
Additionally, we should search as any of the ISBN variations to broaden our matches
Note: Curently only an ISBN 10 is stored in import biblios, so for an ISBN13 that doesn't convert
the value will be blank - this is another bug
To test:
1 - Perform a cataloging search for a valid ISBN 13 with no ISBN10 counterpart:
9798200834976
2 - 500 error
3 - Apply patch
4 - Repeat, no results
5 - Import some records
6 - Search by title/author/isbn
7 - Confirm searching works as expected
WNC amended to fix spelling
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
AMENDED: Useless call of ISBNs (plural) when you only pass one parameter.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We dropped it on bug 12561 when removing the non-XSLT view. This feature
has never been implemented for XSLT views and the pref must then be
removed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fix the bug where object is first stringified and then tested for
being a Koha::Item.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Trivial add. Reads much better. And might help future diffs.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To make sure we have logging the values from DB.
It will reduce DB action_log table size when we log the full object and
it contains DateTime object.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If is entirely possible to create an SIP institution whose ID does not match a valid branchcode in Koha's SIP config. In fact, Koha's example SIP config contains an example of this ( kohalibrary / kohalibrary2 ).
If a SIP login uses an institution with an id that doesn't match a valid branchcode, everything will appear to work, but the SIP worker will die anywhere that Koha gets the branch from the userenv and assumes it is valid.
The repercussions of this are that actions such as the checkout message simply die and do not return a response message to the requestor.
At the very least, we should output a warning to the SIP log.
I think we should strongly consider disallowing institution ids in the SIP config that do not match valid branchcodes. In this scenario, attempting to start the SIP server should result in a error message with the SIP server exiting immediately.
Test Plan:
1) Apply this patch
2) Make a sip login that uses an instution whose id is *not* a valid branchcode
3) Start the SIP server
4) Check sip.log, you should see a warning similar to the following:
[2021/10/18 12:18:29] [2068079] [ERROR] ERROR: Institution kohalibrary does does not match a branchcode. This can cause unexpected behavior. C4::SIP::Sip::siplog /kohadevbox/koha/C4/SIP/Sip.pm (220)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This content-type might be more appropriated to use as a temporary
label for the serialized email message with attachments.
WARNING: perl -cw tells you that the constant is redefined. This has
to do with an already existing module dependency loop of Letters.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: tidied.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch changes how multipart MIME messages are handled on the
message_queue table.
The email, with the required attachments, is now generated using
Koha::Email, and serialized using Koha::Email->as_string.
This bug also adds Koha::Email->new_from_string which is used to read
that data from the DB, and produce a Koha::Email object, that can be
further augmented/modified using regular Koha::Email methods.
This implementation should be considered a middle ground, with
backportability in mind. higher-level methods should encapsulate setting
the default headers and addresses, to clean the area a bit further.
Preparation:
- You need a valid SMTP configuration in koha-conf.xml. If you use Gmail
you can generate an 'app password' and set things like this:
<smtp_server>
<host>smtp.gmail.com</host>
<port>587</port>
<timeout>5</timeout>
<ssl_mode>STARTTLS</ssl_mode>
<user_name>youraddress@gmail.com</user_name>
<password>youpassword</password>
<debug>1</debug>
</smtp_server>
- Set KohaAdminAddress to your address.
To test:
1. Pick a patron. Make sure it doesn't have any email address (Acevedo?)
2. Set an overdue notice trigger for its category
3. Check something out, with due date in the past to force an overdue
4. Run:
$ kshell
k$ misc/cronjobs/overdue_notices.pl -v
k$ exit
$ koha-mysql kohadev
> SELECT * FROM message_queue WHERE borrowernumber=the_borrowernumber;
=> SUCCESS: A notice has been created
5. Run:
$ kshell
k$ misc/cronjobs/process_message_queue.pl --verbose
=> SUCCESS: SMTP is ok => Email is sent
=> FAIL: Your inbox shows an email with weird content
6. Apply this patches
7. Run:
$ koha-mysql kohadev
> DELETE FROM message_queue;
8. Repeat 4 and 5
=> SUCCESS: You got an email with an attachment!
=> SUCCESS: The attachment contains an email that couldn't be delivered!
9. Try all the things that enqueue messages :-D
=> SUCCESS: No behavior change
10. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Edited the POD, restoring a few lines that describe the needed hash
keys of the attachments.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch builds on Bug 22318 to move the OpacNavBottom system
preference into the "Additional contents" system, making it possible to
have language- and library-specific content.
To test you should have some content in the OpacNavBottom system
preference. To make testing easier it's also a good idea to have content
in the OpacNav preference.
- Apply the patch and run the database update process.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from OpacNavBottom is now stored there. When you
edit the entry you should see content from the OpacNavBottom system
preference under the "default" tab.
- The publication date for the entry should be today's date.
- Confirm that the previous contents of OpacNavBottom were added
correctly.
- Go to Administration -> System preferences -> OPAC and verify that
the OpacNavBottom preference has been removed.
- Update and reinstall active translations (for instance fr-FR):
- cd misc/translator/
- perl translate update fr-FR
- perl translate install fr-FR
- View the OPAC and confirm that the contents of the OpacNavBottom
system preference displays in the left-hand sidebar.
- Test as many pages as possible to confirm that wherever the
OpacNavBottom content is displayed, OpacNavBottom is also displayed.
- Test also using the updated translation.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch builds on Bug 22318 to move the OpacNav system
preference into the "Additional contents" system, making it possible to
have language- and library-specific content.
To test you should have some content in the OpacNav system
preference. To make testing easier it's also a good idea to have content
in the OpacNavBottom preference.
- Apply the patch and run the database update process.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from OpacNav is now stored there. When you
edit the entry you should see content for each of the enabled
translations in your system under each tab.
- Confirm that the previous contents of OpacNav were added
correctly.
- Go to Administration -> System preferences -> OPAC and verify that
the OpacNav preference has been removed.
- Update and reinstall active translations (for instance fr-FR):
- cd misc/translator/
- perl translate update fr-FR
- perl translate install fr-FR
- View the OPAC and confirm that the contents of the OpacNav system
preference displays in the left-hand sidebar.
- Test as many pages as possible to confirm that wherever the
OpacNavBottom content is displayed, OpacNav is also displayed.
- Test also using the updated translation.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 24223: (follow-up) Add date to OpacNav additional content entries
This follow-up modifies the atomic update so that it inserts today's
date as the "Published on" date. Without that information the system
considers the item unpublished and will not display the content.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 24223: (follow-up) Make logged-in user's branchcode available to template
This patch makes a couple of corrections for problems I discovered
while working on Bug 24224: The variables required for correct display
of news items by branch and language were not consistently available to
the templates.
In opac-readingrecord.pl, the "lang" variable was being overwritten. On
this and other pages the logged-in patron's brachcode was not made
available. I've corrected instances of KohaNews.get() to use the
globally-available "logged_in_user.branchcode" instead.
To test, apply the patch and follow the original test plan, with the
addition of instances of the OpacNav additional contents item which
have a specific library selected.
Confirm that such items are correctly displayed according to the
logged-in user's home library. If there is no logged-in user the
library-specific OpacNav should not display.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 24223: (follow-up) Updates to conform to new practices
- The patch now works with new "Additional contents" system
- The database update follows new skeleton.pl
- Add "OpacNav" option to the additional contents template
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 24223: (follow-up) Add missing "return" to atomicupdate
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 24223: (QA follow-up) Link OpacNav to HTML customizations now
In the pref description of OpacNavBottom. (Before obsoleting that
one too somewhere soon.)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The 'Polish notation' actually simplifies things.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is a correction to Bug 11046: YYY-, YY--, Y---, are also
correct according to ISBD: uncertain year, but certain decade/century
(cf. n. 4.3.8 in ISBD Consolidated Edition of 2011).
(Question mark is not mandatory.)
In addition, in Poland a form with one only dash is quite common,
like YY- (== YY--).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
See last follow-up.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It is a confusing name because we have 'Article Request' as a feature,
and this does not follow Koha terminology.
Test plan:
`updatedatabase` and confirm that the syspref has been renamed
`git grep RequestOnOpac` => No occurrence in the code
QA: The syspref's value is always retrieved using Koha.Preference from
.tt files, we don't need to send it from controllers or C4::Auth
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the code for itemtypeslimit work, and adds options for shelving location and collection code
This also remove the 'post' method from the form to allow easy bookmarking
To test:
1 - Add holds to your system
2 - Run the holds queue builder
3 - Browse to Circulation->Holds queue
4 - Note the library dropdown
5 - Apply patch
6 - Reload and note new options
7 - Test that both limits and 'All' options work as expected
8 - Note that description at top includes options when selected
"### items found for All libraries and item type:(Books)"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Before dropping a primary key we need to see if one exists - this updates
the installer method to allow searching for existence of key
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Bug 26326: (follow-up) Address qa script failures
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
2021-09-28 Updated version
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Note that without the use URI::QueryParam statement in C4::Auth we get:
Can't locate object method "query_param_delete" via package "URI::_generic" at /kohadevbox/koha/C4/Auth.pm line 1254
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
- There are CAS demo servers, pick one [1]
- They all seem to have the same user/pass as of writing this:
User: casuser
Password: Mellon
To test:
1. Enable CAS and all related preferences. I chose v3 or higher, it only affects the logout action.
2. Set the CAS URL: https://casserver.herokuapp.com/cas (note that if you click on any of the examples, they include a trailing /login, don't put it).
3. Generate a Koha user, with userid: casuser (I also used that for cardnumber, just in case). Set no password to the user, or its irrelevant anyway. Add it stff permissions.
4. Open your Koha OPAC, I use KTD thus:
http://kohadev.myDNSname.org:8080
5. Try to login using CAS
=> SUCCESS: You are redirected to the right login page
6. Login using casuser/Mellon as advertised in the 'demos' site.
=> SUCCESS: You are logged in!
7. Now logout
=> SUCCESS: You are sent to CAS so they know you wanted to logout (if you enabled CAS logout)
8. Repeat on the staff interface.
=> SUCCESS: Things work!
9. Apply this patches, restart all the things:
$ restart_all
10. Repeat all in OPAC and admin interfaces
=> SUCCESS: Things work!
11. Sign off :-D
[1] https://apereo.github.io/cas/Demos.html
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We should follow the same pattern as ldap and not use C4::Auth_with_cas
if the cas syspref is not turned on.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 19873 fixed search with value 0.
It works in first page but not in other pages.
This patch fixes query_cgi var.
Test plan:
- create a st-numeric index in zebra conf related to
a numeric field
i.e:
yourindex 1=yourindex 4=109
- fill a field with 0 in several biblio records,
- reindex your biblios,
- search yourindex=0 and go to second page of results,
- should not work,
- apply this patch,
- test again,
- should work
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
