- fix identation in one line
- remove a commented-out warn
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch switches from using a combination of
biblionumber/borrowernumber to using reserve_id where possible.
Test Plan:
1) Apply patch
2) Run t/db_dependent/Holds.t
Signed-off-by: Maxime Pelletier <maxime.pelletier@libeo.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some patron infos were hard coded instead
of using the variables defined in SIPtest.pm
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The debarred status in DB switched from a boolean to a date.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Correctly pulls debared flag instead of debarment date.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adding a use English to mosules which dont may
waste a few CPU cycles and bytes of storage
but doesnt add anything to the sum of human happiness
Remove unnecessary use English's
Removed already commented out but equally unnrcessary
use Exporter in same modules
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Expansion of Liz Rea's original patch
Bug report specifically mentioned lack of the
Zip/Postal code but all used address fields should
be included. Moved the address
generation to its own sub.
Hopefully using an if else will read more clearly than
the original ternary operator proved to be
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
All the modules in the SIP/ILS tree are objects
The addition of calls to Exporter or hand manipulation of
@ISA added unnecessary bloat
Removed the "self = shift or return" idiom as it is nonsensical
if the method can only be called via an object.
standardized inheritance via use parent
added a $self = shift in a couple of places where it
was not strictly necessary as its absence seemed to have
misled readers in the past
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebase and merge based on Mark Gavillet's patch to reduce
the loan period given to items on renewal when they are
in high demand for holds
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Renewals were being rejected for incorrect reasons
Checking was being done against the wrong object
Add more informative messages on failure
Correctly set due_date for renewal response
Avoid crashing the SIPServer because it handles RenewAll
incorrectly
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
SIPServer.pm requires that C4/SIP is added to its lib
path This has been done by passing this directory
to it via -I. By using FindBin it can set the path
for itself correctly. This will also work if the C4/SIP
directory tree is moved to a non-standard location
Removed the now redundant -I. from sip_run.sh
Added a variable to sip_run.sh for the koha tree to
highlight a problem with the script if you have multiple
directories in the PERL5LIB environment variable
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Be liberal in what we accept, but strict in what we send:
Never exit the server process, but send a SC_RESEND message (96)
to the client if we received anything we don't understand.
This is consistent with SIP server implementations of other ILSs.
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Ian Walls <koha.sekjal@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Most units require or tolerate CRLF as the terminator
Using only \r causes many including 3M units to signal errors
due to delay this resets CRLF to be default but adds a single
constant variable and explanation so that if you have a
"strictly conforming" unit (the 'Baby' is the only I have encountered
you know where to make the change
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Add C4/SIP to perlcritic tests. Fix those issues that were
generating perlcritic errors
Signed-off-by: Stacey Walker <stacey@catalyst-eu.net>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
If a discharged item is captured for a hold at another branch
the selfcheck should generate a branchtransfer for it.
This was complicated as the checkin routine was setting its own
location from a field not set in many scm machines (e.g. 3M)
also in ILS::Transaction the test for location was incorrect
assuming that an empty string or undefined was a valid location
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Shelf Check was receiving messages saying item was wanted
for a hold but the item was discharged to the shelf
not associated with the hold or transited to
the pickup location. The message was also being sent
on discharge of items when a suitable item had already
been captured.
Checkin now associates the item with the hold and sets
the appropriate data for a correct checkin response
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
The server returns its branch as the institution in the config file
However in transactions it will default to the homebranch of the
sip user which may not be consistent with that. Needs to set branch
in the session if there is a value in config otherwise statistics and
behaviour can be wrong (esp in discharge)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Explicitly clear these arrays and update them directly.
In practice item numbers were already in them when called
so that more items were being returned than were actually
renewed (or failed)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Functionally sound patch, and tested in production
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Observe AllowItemsOnHandCheckout syspref when using SIP self checkout
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
To test:
* place an item on hold for patron A
* attempt to circulate that item to patron B (via SIP/selfcheck)
syspref off: item should not circulate to patron B
Syspref On: item should circulate to patron B
Both conditions passed in our testing.
Also verified that normal staff client behavior regarding this situation was preserved. It was.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
The scripts run with the caveat that you must specify the path to SIPconfig.xml. The followup previously attached should take care of that issue.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This requires Chris C's patch to move the scripts to the new location outside of C4.
To test:
run sip_run.sh with no arguments - it should fail with a message to add the path and try again.
Run sip_run.sh with a path to a valid SIPconfig.xml - it should start and run.
Corrects typo in list of flags; was DEBARRED, but the actual name of the flag is
DBARRED (for some reason)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Checking in an available item returns an error (which is correct) without
giving a reason for the failure as screen_msg (aka AF field in SIP2 is empty).
Based on code suggested by Patrick Langer <patrick.langer@easycheck.org>
Signed-off-by: Ulrich Kleiber <ulrich.kleiber@bsz-bw.de>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
stdout is by default buffered and a flush is only guaranteed on CR
Sip responses are not CR terminated so we need to ensure autoflush
is switched on so that the filehandle is flushed after a print
Otherwise this can manifest as self checks running slow or
failing due to timeout (although in the log we see the response)
Signed-off-by: Ulrich Kleiber <ulrich.kleiber@bsz-bw.de>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Allow fee paid to be supported for those machines which handle it
Development Sponsered by Halton Borough Council
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Due to a typo in the hash key check_inst_id in the
handle_end_patron_session was always logging an error
as the actual field contents were not being checked
unlike in other messages
Signed-off-by: Frederic Demains <frederic@tamil.fr>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
item duedate is not a datetime entity but a string retrieved
direct from the db that only needs restructuring
checkout was doing so but item_info was pretending it was in secs
(actually Item.pm manipulated then overwrote it!!)
assume the date in the db is correct (otherwise madness ensues)
dont try to second guess it
As duedates do not yet include a time element assume end of day
as a safety first
[F. Demians] I confirm Joe Atzberger diagnostic. That's a bug reported by a
library. I've tested Colin Campell solution. It fixes the bug.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Line-endings have been a longstanding problem because
of variations in implementations. But we should still try
to default to the correct thing.
This harmonizes part of Koha's SIP code with the current
SIPServer version, used in common with Evergreen. Repo at:
https://github.com/atz/SIPServer
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
working through the master branch to eliminate all
podchecker warnings/errors
Actual improvement to the quality of the POD will
come later (hopefully with assistance of others)
Signed-off-by: Andrew Elwell <Andrew.Elwell@gmail.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Change timestamp routine to do the right thing when passed an iso date
Otherwise was generating an epoch date of 0
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Using Flag EXPIRED to notice whether Patron CAN or CANNOT checkout a book
Signed-off-by: Henri-Damien LAURENT <henridamien.laurent@biblibre.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Remove any carriage returns in text data as they will be
interpreted as end of message by clients and cause communication failure
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
While the comment correctly notes that the order of variable length
fields is not fixed some units expect mandatory fields to
follow the sequence in the protocol definition and fail
parsing otherwise. Moved institution id to its expected
place in the patron information response.
Indented the first half of the if (patron_valid) so its clearer
that two cases are handled here.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
If an invalid item barcode is passed to checkin
the sip2 connection dies. This is because although
no item object is created its mehods are called in Checkin
To maintain the connection properly catch the condition
and return the correct response to the unit
(should also fix Bug #3696 )
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Although the due date of an on loan item was being retrieved
the appropriate field in the Item object was not set
causing the due date not to be returned in the item
information response
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Fixed two calls where new interface was not used
Arguably new syntax allows more options than we require but it was not catching
error cases (when 0 or undef is passed). It also can now be called in ways
which would validly return multiple hits but explicitly does not
(nor does calling code expect this)
This patch should quieten the flood of errors
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This patch put in SIPconfig.xml SIP2 server logging parameters. This is
way it's possible to modify where SIP2 logs are sent. And fix
OpenSolaris bug.
WARNING: After an upgrade, installation using a custom SIP2 server
config file will need to copy default SIPconfig.xml added section:
<!--
Set Net::Server::PreFork runtime parameters
syslog_ident will identify SIP2 Koha server entries in syslog
For OpenSolaris, add: syslog_logsock=stream
-->
<server-params
min_servers='1'
min_spare_servers='0'
log_file='Sys::Syslog'
syslog_ident='koha_sip'
syslog_facility='local6'
/>
This update the way Member is added and editing so that import and Edition
could be best automatized
GetMember evolves and allow ppl to serach on a hash of data
Adding SQLHelper A new package to deal with INSERT UPDATE and SELECT
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
- added altcontactcountry and B_address2 to tables borrowers and deletedborrowers so that all addresses offer the same fields
- changed B_country and country to work with syspref BorrowerMandatoryField
- changed display of Alternate Address on borrower detail page, added labels, lines and edit button to match the other sections
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Behave consistently with other patron_ids as many sip clients
use this in a subsequent patron information or patron status request
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This adds to the interface and code the ability to set the reserve date when
requesting a hold.
Resubmit. Sorry, I formatted it from the wrong branch.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Implement the optional fields: CR CS CT CV CY and DA.
Also silenced some outstanding debugging print statements.
Consolidated similar accesseor subs in Patron.pm to use x_items.
Adjust SIP tests to specify correct AP (location). Add a 3rd item
to SIPtext.pm for later use.
Note CT (destination) is currently populated with destination branch code.
We can adjust that to be destination branch name, or some combination in
a subsequent patch if necessary.
This work was sponsored by the Northeast Kansas Library system.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This includes some initial work for the 3M SIP2 extensions.
It also better populates the Patron object with methods for
a fuller Patron Information Reponse. This is positively affect
EnvisionWare software, as used by NEKLS.
This work was sponsored by the Northeast Kansas Library System.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
The *_ok methods in ILS.pm were targeting the wrong depth.
This also resolves a longstanding FIXME on to_bool() warning like:
Argument "\x{66}\x{61}..." isn't numeric in numeric ne (!=) at /ILS.pm line 94.
The example_institution_dump.sh essentially provides the proof test case for this patch.
Run it before/after on SIPconfig.xml where "MAIN" has checkout="true" and checkin="true".
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
GetPendingIssues did several bad things:
~ select * on a 4 table join,
~ including multiple namespace collisions,
~ including large fields marc and marcxml from biblioitems,
~ return ($count, \@array_being_counted).
Not everything is fixed here (see FIXMEs), but the situation is
improved considerably, with bug 2900 resolved. The "timestamp"
namespace collision in query should be resolved by separate patch.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This affects transactions on items that may be covered by
a title or item-level hold, but have not yet been retrieved
from the stacks (i.e. "confirmed") by the librarian. This does
not affect waiting holds (found="W"), so they will still block
transaction unless they belong to the operating patron.
Also I cleanup any hold the patron has on a biblio/item when
they are allowed to checkout the item.
Here we are filling the hold because the checkout is allowed, regardless
of of the queue position. This is different from AddIssue's CancelReserve, that
only fills the hold if it is next in line, but in the future AddIssue should
adopt a similar logic.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Allow valid comparison of hold_queue to current user barcode and
permit checkout if the current user is at the front of the queue.
Effectively, this allows a user to checkout a book he has held.
Here are the example checkout (11) and checkout response (12)
statements in a SIP telnet session, showing failure (120) previously
and success (121) after patch application.
Before:
11YN20060329 203000 AOCPL|AA1|AB502326000820|ACterm1
120NUN20081009 140222AOCPL|AA1|AB502326000820|AJKidnapped :|AH|AF2008-10-09 : Koha Admin (1)|BLY|
After:
11YN20060329 203000 AOCPL|AA1|AB502326000820|ACterm1
121NNY20081009 150204AOCPL|AA1|AB502326000820|AJKidnapped :|AH2008-10-10|AFItem was reserved for you.|
This patch also resolves security/privacy issues related to the display
of "needsconfirmation" values that identify, for example, the user
currently issued an item, or with a hold on the item. These messages
should not be passed to an end-user interface.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
SIP actually relied on the AddIssue return that was not reliable.
AddRenew also updated to return C4::Dates object for datedue.
Please note, any running SIPServer will have to be restarted
*immediately* after applying this patch, because although Koha
C4 behaves as normal, the SIP server runs as a Net::Server with
components cached. Changes will not be applied until SIPServer
restarts, and so checkout actions may fail until then.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Following suggestion by Vincent Danjean for Debian
packaging, 0755 -> 0644 for non-executable
files.
Also removed shebang from a few modules in C4.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
SIP code uses UNIVERSAL modules that do not tolerate the circular deps in
C4, specifically, in Auth.pm. Changing the order so that UNIVERSAL follows
the other imports is important to avoiding failures like:
perl -w -e 'use UNIVERSAL qw(can); use C4::Auth;'
"MarkIssueReturned" is not exported by the C4::Circulation module
This patch should resolve the problem earlier seen with Shelves too.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
ILS::Patron is where most of the intelligence for SIP's representation
is lodged. Currently there is difficulty with C4::Members functions.
GetMemberDetails is required for the needed flags, but it returns
empty structure on bad barcodes, where it should be undef.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
The basic problem is that the SIP logic doesn't know where the
input is coming from. It might be a RAW socket, and it might
be telnet. If it is telnet, although the specs declare a
character set (from MS, unfortunately), they do not specify a telnet
implementation. So you might get telnet handshaking or
renegotiations in the middle of an otherwise peaceful session and
these should not be taken as SIP commands. Patches include a move
towards using $CRLF from Socket to avoid problems w/ foreign platform
mapping \n and \r to \015 or \012.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
* Move CheckItemPreSave to C4::Items (from C4::Biblio)
* Modified C4::Biblio::AddBiblioAndItems to use appropriate
internal routines from C4::Items
* Moved GetItemnumberFromBarcode to C4::Items
* Removed duplicate C4::Biblio::_koha_new_items
* Removed disused C4::Biblio::MARCitemchange
Currently AddBiblioAndItems is a special routine that
uses private subs from both C4::Biblio and C4::Items.
This needs to be refactored.
Signed-off-by: Chris Cormack <crc@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
