My patch for Bug 5006 introduced a lot of markup changes to the record
matching rules template. I missed a change in one are though, which
caused a bug with the way the 'Remove match check' link works.
To reproduce:
- Go to Administration -> Record matching rules.
- Edit a matching rule which includes at least one match check.
- Click a 'Remove match check' link. The entire "Required match checks"
block is removed.
To test, apply the patch and repeat the steps above. Clicking any
'Remove match check' link should remove only the corresponding rule.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch fixes some variable scoping problems when running
the circulation statistics wizard under Plack. For example,
when using the item type as a row header, with this patch the
item type description is displayed rather than "UKNOWN VALUE".
This patch also enables warnings and fixes a couple variable
initialization issues. (Note that turning on warnings across
the board would make it easier to identify Plack variable scoping
issues, as "Variable "$foo" is not available at' errors would
be recorded in the Plack error log).
To test
-------
[1] Run the staff interface under Plack.
[2] Go to the Circulation Statistics Wizard and run a report
using item type as the row. Note that the row labels
display as "UNKNOWN VALUE" rather than the item type.
[3] Apply the patch and restart Plack.
[4] Run step #2 again; this time, the item type descriptions should
be used as the row labels.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Instead of relying on existing data, we use new TestBuilder recs.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
No need to bail out, if we are using TestBuilder.
Somehow, this test passes with me if we add a new record, and if
we do not, it fails (using BK as the first itemtype with notforloan
is 0).
Looking further, we should imo remove the Koha::ItemTypes searches
here and not depend on existing data. Just add some item types.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Looking at commit aafe73eefb
Bug 14828: Use Koha::ItemType[s] everywhere C4::ItemType was used
-my @item_types = C4::ItemType->all;
-my @for_loan = grep { $_->{notforloan} == 0 } @item_types
- or BAIL_OUT("No adequate itemtype");
-my $itemtype = $for_loan[0]->{itemtype};
+my $itemtype = Koha::ItemTypes->search({ notforloan => 1 })->next;
+$itemtype or BAIL_OUT("No adequate itemtype"); #FIXME Should be $itemtype = $itemtype->itemtype
It seems that the tests expect itemtypes for loan.
Test plan:
prove t/db_dependent/HoldsQueue.t
should still return green
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. No qa test tool errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Adding follow-up.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently, serials => 'routing' is required, which does not make any
sense.
It's a copy/paste error when this file has been created (you can blame
me).
Note that I am not sure catalogue is the correct permission, but it's
the one used almost everywhere in this module
Test plan:
Confirm that catalogue is enough to search for patrons to add to a
patron card.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The marc subfield structure is currently cached using a global variable
of C4::Context. The infos are retrieved every time a new context is
created.
This patch suggests to use Koha::Cache instead.
To achieve this goal, a new subroutine is created
C4::Biblio::GetMarcSubfieldStructure, it will be called from code which
needs to get the marc subfield structure. GetMarcFromKohaField,
GetMarcSubfieldStructureFromKohaField, TransformKohaToMarc and
_get_inverted_marc_field_map are modified accordingly and the cache is cleared
when the table is updated (from the 3 pl scripts modified by this patch).
The caching done in C4::Context (marcfromkohafield) is removed.
Test plan:
Play with the marc subfield structure (in the administration module),
then add and edit records and make sure everything went fine.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Everything works as expected on my functional tests. I'm really happy to see the
patch introduces relevant tests for previously untested functions.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Broust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: JM Broust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Broust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Changes the value of the "comment" column in "borrower_debarments" table
from "Restriction added by overdues process yyyy-mm-dd hh:mm:ss" to
"OVERDUE_PROCESS yyyy-mm-dd hh:mm:ss" in the overdue_notices.pl. Then in
the templates "moremember.tt", "circulation.tt", "memberentrygen.tt",
"opac-reserve.tt" and "opac-user.tt" the value of "comment" is
check, if it's an automatical comment due to overdue process it'll
write "Restriction added by overdues process yyyy-mm-dd hh:mm:ss",
then if there is a customizable comment it will be written without
modification. Like this, the comment "Restriction added by overdues
process" is written in the po files and can be translated later.
To test:
1) create a patron with automatical restriction due to overdue process;
2) apply patch;
3) run misc/cronjobs/overdue_notices.pl;
4) verify if the comment "Restriction added by overdues process" is well
written and translatable on the following page :
- opac patron home page (opac-user.tt);
- opac item reservation page (opac-reserve.tt);
- pro patron page (moremember.tt);
- reservation item for a patron (circulation.tt, memberentrygen.tt);
5) try to translate the comment in po files;
6) sign off.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When quick adding a new patron, both button are in the DOM and the
second button has a margin-left (from .btn-toolbar > .btn + .btn).
This patch force the margin-left to 0 to avoid the button to move when
toggling them.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 3534 - (QA Followup) Use single toolbar for regular/quickadd forms
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Switch incorrect == to != when checking skipped fields
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
I am not sure if this is desired, it makes sense for consistency but
floats in a wierd place for a short form.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a new system preference:
PatronQuickAddFields
When either this pref or BorrowerMandatoryField is populated this will add a new dropdown to the bew patron toolbar.
When a category is chosen from this dropdown the fields in PatronQuickAddFields and BorrowerMandatoryField will be displayed.
There will be a button allowing a user to switch from the quickadd to the full form and fields will be copied between the forms when toggling.
The Quick add will only be displayed on add of a new patron, future edits should display the full form.
Test plan:
1 - Apply patch
2 - run updatedatabase.pl
3 - Add a new patron and ensure nothing has changed
4 - Populate either PatronQuickAddFields or BorrowerMandatory fields
and note the new button for adding a patron
5 - Click the Quick add and choose a type
6 - Only required or quick add fields should be displayed
7 - Verify toggling forms copies information
8 - Ensure you cannot save patron without filling required fields
(quick add fields should be optional)
9 - Ensure you can save patron with fields filled out
10 - Ensure that a duplicate patron brings up the duplicate/add new
buttons with full form displayed
11 - Verify that subsequent edits use only full form
12 - Verify that data on form submitted is the data saved to patron
13 - Test with various values in both MandatoryBorrowerFields and PatronQuickAddFields
Sponsored by: VOKAL (Vermont Organization of Koha Automated Libraries)
Followed test plan, works as expected.
Re-tested together with followup, works as expected (2016-06-02)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch answers Jonathan's request to simplify this patchset a bit.
It removes the need for the .sql file, as _default_rule now defaults to
a fixed value (1, which was set by the removed .sql file).
This allowed to remove the overloaded ->delete method.
The tests have been adjusted to reflect this changes, including tests for
the new 'default'-if-absent situation.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch picks the item's holding branch *before* it gets fixed
by using the checkin library instead. This way the RefundLostOnReturnControl
syspref set to ItemHoldingBranch is respected (otherwise, as Nick explained
this behaves just like if CheckinLibrary was set)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch introduces the changes to the sysprefs and the atomic update
that creates the new table.
It picks the syspref value for RefundLostItemFeeOnReturn and uses it to
create a default (branchcode='*') rule on the new table.
Sponsored-by: DoverNet
Sponsored-by: South-East Kansas Library System
Sponsored-by: SWITCH Library Consortium
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch makes AddIssue and AddReturn use the new implementation
The behaviour should respect the specification.
Sponsored-by: DoverNet
Sponsored-by: South-East Kansas Library System
Sponsored-by: SWITCH Library Consortium
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch introduces the CRUD UI for managing the refund lost item fee
rules on the general 'Circulation and fines rules' page.
Verify that rules can be added and changed.
Rules are correctly associated to the chosen branch (or the
general default rule).
To test:
- Apply the patch
- Open smart-rules.pl
=> SUCCESS: The text and refund rules section correctly refers to default global rules.
The policy can be set to Yes and No, and works as expected.
- Pick a specific branch
=> SUCCESS: The rule refers to the specific branch
=> SUCCESS: It detects the default rule is picked
=> SUCCESS: On changing the rules values are correctly retrieved if entering
again to the page.
=> SUCCESS: The 'Use default' text is suffixed with the correct value set by the user
in the 'All libraries' scenario.
=> Sign off :-D
Sponsored-by: DoverNet
Sponsored-by: South-East Kansas Library System
Sponsored-by: SWITCH Library Consortium
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch introduces unit tests for the feature.
To test:
- Have all patches from this bug applied
- Run:
$ prove -v t/db_dependent/RefundLostItemFeeRule.t
=> SUCCESS: All tests pass!
Sponsored-by: DoverNet
Sponsored-by: South-East Kansas Library System
Sponsored-by: SWITCH Library Consortium
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch introduces new classes for handling refund lost item fee
rules. It introduces a new table for storing this rules.
It is designed so it is possible to define a global rule, and then
branch-specific ones. The specific is prefered if available.
This behaviour is fully tested by unit tests introduced by the following patches.
This cannot be tested on its own.
Sponsored-by: DoverNet
Sponsored-by: South-East Kansas Library System
Sponsored-by: SWITCH Library Consortium
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch changes the label from "For:" to "Library:" in the
acquisition information filter on the suggestions page in staff client.
To test:
- Apply patch
- Go to Home > Acquisitions > Suggestions management
- Verify that label reads as appropriate (in filter
Acquisition information)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This module is no longer in use and can be removed.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
This part involves some changes in a bunch of mysterious debian|ubuntu
related files, not quite sure if I know what I'm doing
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
ooking at this code, you might think these subroutines are cached, but
actually they are not.
The eval surrounding the code hides a bug, if you remove it, you will
get:
Invalid memcached argument (expected a hash)
Test plan:
Do not apply this patch and confirm that the code does not work
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds CH price format to:
koha-tmpl/intranet-tmpl/prog/en/includes/format_price.inc
(as of comment #6)
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
As of comment #5, adding file
installer/data/mysql/atomicupdate/bug_Bug_16768_official_number_format_switzerland.sql
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Testplan:
- Apply patch
- Run t/Number/Price.t
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds the official number format for Switzerland (CH) and makes
it selectable in syspref 'CurrencyFormat'
To test:
- Apply patch
- Set syspref 'CurrencyFormat' to '360'000.00 (CH)'
- Go to Home > Administration > Budgets administration
- Create or edit a budget with Total amount of 1234567.89
- Verify that the amount appears properly formated as 1'234'567.89
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It would be very helpful for librarians to have links directly to the
record and items editor from a serial. Right now moving from the serial
to those editors requires jumping through a number of pages.
Test Plan:
1) Apply this patch
2) Browse subscription-detail.pl for a given serial
3) Under the Edit button, note the "Edit record" link
4) Verify the link takes you to the marc editor for that record
5) Create or find a serial that is set to create items on receiving
6) Under the Edit button, note the new "Edit items" link
7) Verify the link takes you to the items editor for that record
8) Create of find a serial that is *not* set to create items on receiving
9) Verify the "Edit items" link does not exists for that serial
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch changes course reserves to check for item notes form the
course reserve and fallback to itemlevel notes if they are empty
To test:
1 - Enabvle course reserves
2 - Add some items
3 - Make sure the items have notes at the item level and not at course
reserves
4 - Notes don't display in staff or opac
5 - Apply patch
6 - Notes display in staff and opac
7 - Add notes at course reserves level
8 - These override the item level notes
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch removes the use of "onclick" from several templates, instead
defining click events in JavaScript.
Also changed: Some markup corrections.
To test, apply the patch and:
- Go to Circulation -> Upload offline circulation file
- Browse for an offline circulation file.
- Clicking the 'Upload file' button should work correctly.
- After uploading a file, both the 'Add to offline circulation
queue' and 'Apply directly' buttons should work to trigger their
corresponding processes (keeping Bug 16603 in mind).
- Go to Patrons -> Patron lists.
- For any patron list containing patrons, click the 'Print patron
cards' menu item. This should trigger a modal window which exports
the correct list.
- Go to Tools -> Batch item modification.
- Submit a batch of items for modification.
- Clicking the 'Save' button should trigger the background job and the
items should be successfully modified.
- Go to Tools -> Batch item deletion.
- Submit a batch of items for deletion.
- Clicking the 'Delete' button should trigger the background job and
the items should be successfully deleted.
- Go to Tools -> Calendar.
- Trigger the 'Add new holiday' panel by clicking a day on the
calendar which has no holiday defined.
- Clicking the 'Cancel' link should hide the panel.
- Trigger the 'Edit this holiday' panel by clicking a day which has a
holiday defined.
- Clicking the 'Cancel' link should hide the panel.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Everything works as previously.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is the update for April 2016 changes of Library of Congress
The basic creation of the files is done in http://translate.koha-community.org/files/it/mandatory/
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Both files load without problems.
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch modifies several include files, removing "onclick" attributes
in favor of defining events in JavaScript.
A reusable "toggle" function has been added to the global JS file so
that clicking elements with the class "toggle_element" will toggle the
display of elements as defined in the click target's "data-element"
attribute.
Also changed: In subtypes_unimarc.inc some capitalization errors have
been fixed and label/id pairs corrected.
To test, apply the patch and clear your browser cache if necessary.
- On the Acquisitions home page, click the "Orders search" header search
tab. Clicking the [+] link should expand and collapse the additional
search fields.
- On the checkout or patron detail page, view the "Restrictions" tab.
Click to add a restriction and use the datepicker to select a date.
Clicking the "Clear date" link should clear the date.
- Trigger the help window on any page. Clicking the "close window"
button should work correctly.
- Go to Administration -> Patron categories -> Edit. Checking and
unchecking messaging preference options should work correctly. The "do
not notify" checkbox should clear other checkboxes in that row and
vice versa.
- In Serials, from a subscription detail page, clicking the "Renew"
button should trigger the renew popup.
- Go to Acquisitions -> Vendor -> Add to basket -> From a subscription.
Clicking the "Advanced search" link in the left hand sidebar should
toggle the sidebar search form.
- In a UNIMARC system, view the advanced search page. Clicking the "Show
coded information filters" link should show additional search fields.
(I tested in my MARC21 system by temporarily moving line 174 of
advsearch.tt to line 172).
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch removes the use of "onclick" from all header search forms for
the purpose of triggering the "keep_text" function. This behavior is now
handled in the globally-included JS file.
To test, apply the patch and clear your cache if necessary.
- Enter text in any header search form field. Click to each other tab
in the header and confirm that your text is copied to each.
- Test the behavior of the header search form on at least one page where
each is included:
- The staff client home page
- The advanced search page
- The authorities home page
- The administration home page
- The cataloging home page
- The checkin page
- The circulation home page
- The patrons home page
- Acquisitions -> Vendor -> Contracts
- Administration -> Cities
- Administration -> Currencies and exchange rates
- Administration -> Patron categories
- Administration -> Printers (why is this page still around?)
- Administration -> System preferences
- Administration -> Z39.50/SRU servers
- Tools -> Notices & slips
This patch modifies does not fix the existing (unreported) bug which
prevents the keep text function from working in the include file used on
these pages:
- Acquisitions -> Vendor -> Basket -> New order from suggestion
- Administration -> Budgets
- The serials home page
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch fixes some minor bugs and adds a small enhancement to the
quotes editor and quotes upload pages.
To test, apply the patch and go to Tools -> Quote editor
- In the table of quotes, clicking the "ID" table header should trigger
an alert, "Click on the quote's ide to select..."
- Go to "Import quotes" and select a file to upload.
- On the upload preview page you should see a new "Cancel import"
button. Clicking it should return you to the quotes upload page after
asking for confirmation.
- Test the upload cancel button:
- If you have fast reflexes or are uploading a file large enough, you
should be able to see a "Cancel upload" button during the upload
process.
- Clicking this button should cancel the upload and return you to the
quote upload page.
Tested on top of Bug 16589, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch removes the use of "onclick" attributes from some patron
pages.
To test, apply the patch and:
- In Patrons, perform any search which will return multiple results.
Confirm that the "select all" and "clear all" links work as expected.
Font Awesome icons have been added to these links.
In the left-hand sidebar, change any of the filters and click the
"Clear" button. The form (and your search results) should reset.
- Open the 'Set permissions' page for any patron. Checking any
permission with sub-permissions should correctly expand the tree and
select all sub-permissions. The reverse should also work.
Also changed in this file: The "Inconsistency detected" alert has been
reformatted to make it translatable.
- View the detail page for a patron with one or more restrictions.
Clicking the "View restrictions" link at the top of the page should
jump you to and activate the restrictions tab.
- View the 'Notices' tab for a patron who has been sent one or more
notices. Click any notice title to expand the notice. Clicking the
"resend" button should resend the notice.
- Create a new patron with the same first and last name as an existing
patron. This should trigger a duplicate warning message. Click the
"View existing record" link to trigger a pop-up window with a patron
detail brief view.
In this window an "email" class has been added to the primary and
secondary email lines so that long email addresses don't overlap the
second column of data.
Confirm that clicking the "close" button in this window closes the
window. The changes to staff-global.css are included in this patch to
prevent the close button from having an incorrect color change on
hover.
Signed-off-by: FILIPPOS KOLOVOS <f.kolovos@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Went through test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds an "add to cart" link to each line of search results in
the staff client.
To test, apply the patch and clear your browser cache if necessary.
- Enable the intranetbookbag system preference.
- Perform a search which will return multiple search results.
- Each result should have an "Add to cart" link.
- Clicking the "Add to cart" link should add the title to the cart,
triggering the correct pop-up message and changing the link to read
"In your cart (remove)."
- Clicking the "remove" link should remove the title from your cart
and trigger the correct messages.
- Add multiple titles to your cart and perform the same search again.
Each result should correctly indicate which titles are already in your
cart.
- Open the cart popup window.
- Check the checkbox for one or more titles in your cart and choose
"Remove." The titles should be removed, and the "In your cart" label
in the search results page should reflect that the titles are no
longer in the cart.
- Choose "Empty and close." All titles in the parent page should now
indicate that they are not in the cart.
- Disable the intranetbookbag preference and confirm that the "Add to
cart" links are no longer there.
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
