* to include 'authorised value' in text
* to keep sentences on one line (translation)
* to use sentences instead of just links in some places
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch and look at the descriptions of the following system preferences. Make sure each link works and makes sense:
DefaultLongOverdueChargeValue
DefaultLongOverdueLostValue and DefaultLongOverdueDays
DefaultLongOverdueSkipLostStatuses
UpdateItemWhenLostFromHoldList
NewItemsDefaultLocation
UpdateItemLocationOnCheckin
SkipHoldTrapOnNotForLoanValue
UpdateNotForLoanStatusOnCheckin
Reference_NFL_Statuses
ItemsDeniedRenewal
Signed-off-by: Catrina <catrina@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a enw system preference SCOLoadCheckoutsByDefault
When enabled, a patron's list o fcurrent checkouts will be loaded when the sign in to the SCO
module. If disabled, they will see link to load their checkouts. In either case, a new section
is added to the SCO to show a brief display of the last checked out it
To test:
1 - Enable WebBasedSelfCheck system preference
2 - Browse to:
http://localhost:8080/cgi-bin/koha/sco/sco-main.pl
3 - Sign in the SCO user (or enable AutoSelfCheck)
4 - Sign in as a user with several items checked out
5 - Confirm you see a list of items checked out
6 - Apply patches, updatedatabase, restart_all
7 - 'Finish' and login patron to SCO again
8 - Confirm you still see the list
9 - 'Finish'
10 - Chenge the system preference
11 - Sign in to SCO, confirm checkouts do not load
12 - Confirm you see 'Load your checkouts' link
13 - Check an item out
14 - Confirm you see the last checkout, but not a list
15 - Attempt to checkout an item that cannot be checked out
16 - Confirm "Return to account summary" does not load checkouts
17 - Click "Load your checkouts"
18 - Confirm they load
19 - Check out another item, confrim they remain and are updated
20 - Checkout an item that cannot be issued
21 - Confirm 'Return to account summary' loads the checkouts again
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com>
Signed-off-by: AndrewA <andrew.auld@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes some inconsistencies in the budget and fund
administration templates, making sure the page title, breadcrumb
navigation, and page headers are consistent with each other.
Other changes: Bootstrap tooltips have been enabled in a few places
where the markup showed intent for the tooltips to be active but where
the JS was not being initiated.
Some translation imrovements have been added where budget planning
strings could be improved with context:
'<span>by months</span>' ->
'[% tp("Budget planning", "by months") | html %]'
To test, apply the patch and go to Administration -> Budgets. Test each
of these cases:
- Budgets list
- New budget
- Edit budget
- Duplicate budget
- Close budget
- Close a budget with and without unreceived orders.
- Delete budget
- Test the delete button on a budget which has funds attached to
confirm that the menu item is disabled and a tooltip shows with an
explanation.
- Delete a budget which has no funds attached.
- Add fund
- Test the add fund button on a budget which is locked. The menu
item should be disabled and it should show a tooltip, "Budget is
locked."
- Test the add fund page for a budget which is not locked.
- Click the name of a budget with funds attached to see the funds view
- In this view, if the budget is locked, the "New" toolbar menu
should have a disabled "New fund" item with a Bootstrap tooltip.
- While viewing the funds on a budget, test the "Planning" button to
confirm that the view of each planning type.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-By: Toi Ohomai Institute of Technology, New Zealand
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch corrects the identity provider form so that the label for the
"Allow staff" field has the correct "for" attribute. Currently it is a
duplicate of the one for the "Allow OPAC" field.
To test, apply the patch and go to Administration -> Identity providers.
- Click "New identity provider"
- Near the bottom of the form, look for the "Allow staff" field.
- Clicking the "Allow staff" label should activate the corresponding
dropdown.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the description for the TrackLastPatronActivityTriggers system preference to specify that each time an action occurs, the date last seen is updated, as opposed to once per day.
This patch also uniformizes the options and corrects terminology for
checking in/returning.
To test:
1. Apply patch
2. Go to Administration > System preferences
3. Search for TrackLastPatronActivityTriggers
4. Read the description, make sure it makes sense and the spelling and
grammar are correct
5. Open the drop down of options, make sure the spelling and grammar are
correct
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes some inconsistencies in the classification
configuration administration page, making sure the page title,
breadcrumb navigation, and page headers are consistent with each other.
Test each view to confirm that page title, heading, and breadcrumbs are
consistent:
- Administration -> Classification configuration
- New classification source
- Edit classification source
- New filing rule
- Edit filing rule
- New splitting rule
- Edit splitting rule
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes some inconsistencies in the templates for identity
providers and identity provider domains, making sure the page title,
breadcrumb navigation, and page headers are consistent with each other.
To test, apply the patch and check these views:
- Administration -> Identity providers
- New identity provider
- Edit identity provider
- Confirm deletion of identity provider
- Manage domains
- New domain
- Edit domain
- Confirm deletion of domain
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test Plan:
- Enable ILLModule sys pref and install any backend, or run
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev.sh)
- Verify you can place new ILL requests in OPAC and Intranet
- Apply patch
- In borrower categories, verify there's a new column for 'can place ILL in opac' and is set to 'yes' by default
- Edit your borrower's patron category and set 'can place ILL in opac' to 'No'
- Verify you can no longer place new ILL requests in OPAC
- Verify you also cannot place new ILL requests through URL:
:8080/cgi-bin/koha/opac-illrequests.pl?method=create&backend=FreeForm
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Make sure holds pickup period field is empty when editing a 'default' rule.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When a rule is not set for a speficic line, the value in the syspref
will be used. This should be made clear in the interface.
To test:
1 - Add a new rule for a specific item type
2 - Do not fill the 'Hold pickup period'
3 - Confirm that the rule defaults to the system preference
4 - Hover on 'Default' in the circ rules under 'Hold pickup period'
5 - Confirm the text is readable
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
So that pickup delay can have a different value per patron category,
item type or branch.
To test:
1) Update database, restart services
2) Set ReservesMaxPickUpDelay syspref (if not already set)
3) Edit your circulation rules and set a value under 'Holds pickup
period (day) that is DIFFERENT from ReservesMaxPickUpDelay. Set a few
different numbers for different branches as well.
4) Place a hold on a biblio from the staff client.
5) Check in an item from that biblio and confirm the hold as waiting
6) Confirm the expiration date is calculated using the 'Holds pickup
period' value instead of the ReservesMaxPickUpDelay syspref
7) Revert the waiting status and delete the hold
8) Re-place the hold on the biblio on the OPAC. Notice that when you
change the pick up location, the number of days in the pickup message
below the dropdown changes based on the circ rules.
9) Create a holiday with a date that will overlap with the 'Holds pickup
period'
10) Check in an item from that biblio and confirm the hold as waiting
11) Confirm the expiration date is calculated using the 'Holds pickup
period' value AND considers the special holiday
12) Confirm tests pass t/db_dependent/Holds/WaitingReserves.t
13) Test Talking Tech:
13a) Enable TalkingTechItivaPhoneNotification
13b) Go to Tools -> Notices & slips. Add content to the HOLD phone
(itiva) notice.
13c) In your terminal, run perl
/path/to/koha/misc/cronjobs/thirdparty/TalkingTech_itiva_outbound.pl -o
~/itiva.tmp -w 0 --type=RESERVE
Sponsored-by: Catalyst IT
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch reworks country-list.inc so that each country name can be
wrapped separately in the t() translation function and be processed
individually during the translation process.
To test, apply the patch and update a translation, e.g. fr-FR:
- perl misc/translator/translate update fr-FR
- Edit the updated po file for the language you chose, e.g.
misc/translator/po/fr-FR-messages.po, and locate strings from
country-strings.inc. Each country names should show up as a separate
string for translation.
- Update the file to fill in translated strings for one or more
countries. For example:
koha-tmpl/intranet-tmpl/prog/en/includes/country-list.inc:2
msgid "Afghanistan"
msgstr ""
- Install the updated po file:
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Go to Administration -> Share usage statistics and check the "Your
country" dropdown. The list should look correct.
- Switch to your updated translation and confirm that the country names
you translated show up as expected.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
At the moment it's only possible to cancel order lines while the
basket is still open or from the pending orders page during processing
a shipment. The latter requires you to add a shipment and fake an
invoice. To make things easier we want to optionally allow cancelling
order lines in closed baskets from the basket summary page.
Before applying the patch:
1) Set up data
* Create a new basket
* Create a few order lines, at least 3
* Close the basket
* Receive shipment and receive one order line
2) Verify current behaviour
* On basket summary page: you cannot cancel while the basket is closed
* On the pending orders page you can cancel
Apply patch, run database update, restart_all
3) Verify new behaviour
* Verify that nothing has changed on pending orders and basket summary
* Switch new system preference CancelOrdersInClosedBaskets to "Allow"
* Verify that pending orders hasn't changed a bit
* Verify that you now can cancel your order lines in the closed basket
Exception: the received order line should not be cancellable
Test anything else that you think might make sense ;)
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This commit is a squash of the following:
SUSHI harvesting process in the data providers class:
* Builds the URL query and requests the SUSHI service endpoint
* Parses the JSON response and builds the csv COUNTER file and adds it to counter_files table
Usage statistics data processing:
* When a counter_files entry is stored, CounterFile.pm will:
* Parse the csv COUNTER file and
* Add a usage_titles entry for each unique title in the COUNTER file
* Add the title's respective erm_usage_mus (monthly usage) entries, repeating for each metric_type
* Add the title's respective erm_usage_yus (yearly usage) entries, repeating for each metric_type
Harvesting cronjob;
'Run now':
* API endpoint to start the harvesting process of a data provider
* Button in the data providers list to run the harvesting process for each data provider upon clicked
ERM SUSHI: Background job
Job progress is updated to total amount of usage titles after retrieving
the response from SUSHI;
Job warning and success messages are added accordingly
Redundant duplicate titles will not be added
Redundant duplicate monthly and yearly usage statistics will not be added
Data provider harvest background job harvests once per report_type
Enqueue one background job for each report_type in the usage data provider
Update the way we measure progress in the background job.
It now uses the COUNTER report body rows instead of SUSHI response results.
We're now incrementing and showing the number of skipped mus, skipped
yus, added mus and added yus
There's a bug in the way we calculate yus
Updates to background job progress bar - Depends on 34468
Signed-off-by: Jessica Zairo <jzairo@bywatersolutions.com>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Remove duplicate word, use singular for the note text.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When an item is automatically checked in, Koha should be able to trap that item for the next patron and send a notification to that patron that a hold is waiting for them.
To test:
1. Apply patches
2. restart_all and updatedatabase
3. Go to administration -> item types and edit an item type
4. Make sure the checkbox that is labeled ‘Automatic checkin:’ is checked. At the bottom of the page click save changes.
5. In Administration -> system preferences, search for ‘AutomaticCheckinAutoFill’ and set it to ‘Do’.
6. Check out an item to a patron and make it overdue (.ie set due date to yesterday). Also make sure that the item type you are checking out matches the item type edited in step 4.
7. Place a hold on the item. Make the pickup location the same as the library it is checked out from.
8. Run cronjob at misc/cronjobs/automatic_checkin.pl
9. On the item details page, notice that the item was checked in and now the hold is waiting for pickup.
10. Visit the patron’s page who placed the hold.
11. Click on the notices tab and see that there is a ‘Hold available for pickup’ notice.
12. Repeat steps 6-8, but this time make the hold pickup location different than the library the item is currently checked out to.
13. Notice that this time, the item was checked in, the hold is waiting, and the item is in transit to the other library.
14. If you visit the patron’s page, this time there should be no new notice because the item is still in transit.
15. Sign-Off :)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1) Make sure SerialsSearchResultsLimit syspref is unset or set to 0.
2) Perform an advanced search on serials without any conditions
and confirm all serials are listed as expected.
3) Set SerialsSearchResultsLimit to a value less the the number
of total subscriptions, perform the search again, and confirm
that the number of serials has been limited to the set value.
4) Ensure all tests pass in t/db_dependent/Serials.t
Sponsored-by: Gothenburg University Library
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes all trace of the original OPACCustomConsentTypes
preference. We now use Koha::Plugins->feature_enabled in preference.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Update new OPACCustomConsentType system preference description - bold
and capitalize NOTE for consistency, link to PrivacyPolicyConsent
system preference for consistency, and other minor changes.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Adds preference OPACCustomConsentTypes.
Test plan:
Run dbrev.
Toggle value of OPACCustomConsentTypes / PrivacyPolicyConsent.
Check user page for Consents tab.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new column to the 'Bibliographic records' tab in
Administration > Search engine configuration (Elasticsearch)
To test:
1 - Confirm the new 'filter' column shows
2 - Update an existing field to set filter to punctuation
3 - Confirm it can be saved
4 - Add a new field
5 - Confirm it saves correctly
6 - Unset filter for a field
7 - Confirm it saves
Signed-off-by: Danielle M Elder <danielle.elder@law.utexas.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds 'article' to the list of triggers available for
tracking patron activity.
Test plan
1) Select 'Placing an article request
TrackPatronLastActivityTriggers system preference
2) As a staff member, place a hold on any item for a test user
3) Confirm that the borrowers.lastseen field is updated for that
test borrower
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds 'hold' to the list of triggers available for tracking
patron activity.
Test plan
1) Select 'Placing a hold on an item' in the
TrackPatronLastActivityTriggers system preference
2) As a staff member, place a hold on any item for a test user
3) Confirm that the borrowers.lastseen field is updated for that test
borrower
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the older PatronLastActivity preference opting to
replace it by the new PatronLastActivityTriggers preference. The feature
can now be disabled by simply not selecting any triggers
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This just updates 'Login to OPAC' to 'Login'.. we should squash this
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new syspref TrackLastPatronActivityTriggers to determine which actions should update borrowers.lastseen
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
adds the same feature to Authority Search as in the "normal" Z39.50 search, to display
arbitrary marc fields in the search results
1. apply patch
2. go to System preferences->Authorities preferences
3. the new option "AdditionalFieldsInZ3950ResultAuthSearch" shows up
4. enter the additional field numbers you want to see eg '001'
5. make an "Authority" search via Z39.50
6. the new new column "Additional fields" will display
7. sign off ;-)
Sponsored-by: Steiermärkische Landesbibliothek
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu>
Bug 28166: Removed comments and _add_rowdata
Bug 28166: (follow-up) Restore custom fields for biblios
To test:
1 - Add "245$a" to AdditionalFieldsInZ3950ResultSearch preference
2 - Cataloging -> new from z3950
3 - Search and see results have 'additional fields' including the title
4 - Apply other patches
5 - Restart all
6 - Repeat Z39 Additional fields are now blank
7 - Apply thi patch, restart all
8 - Repeat Z39 search. Additional fields are restored
Bug 28166: (QA follow-up) Fix rebase issue
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Currently the system preference intranetreadinghistory determines visibility of both circulation history and holds history tabs in the patron record. It would be helpful to allow the option of setting each of those independently.
Specifically, libraries have requested the option of being able to view the holds history in a patron record without having to enable viewing of the circulation history.
Test Plan:
1) Apply this patch
2) Restart all the things!
3) Run updatadatabase.pl
4) Verify the new syspref intranetReadingHistoryHolds has the same value
as the existing syspref intranetreadinghistory
5) Disable intranetreadinghistory, enable intranetReadingHistoryHolds
6) Verify you can view a patron's holds history but not reading history
Signed-off-by: Sam Lau <samalau@gmail.com>
JD amended patch:
* renamed syspref intranetReadingHistoryHolds => IntranetReadingHistoryHolds
* tidy
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a note and a link to the EnableItemGroups system
preference from the description of EnableItemGroupHolds.
To test:
1. Apply patch
2. Go to Administration > System preference
3. Search for EnableItemGroup
4. Read the description of EnableItemGroupHolds, make sure the grammar
and spelling are OK.
5. Click the link, it should bring you to EnableItemGroups
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 32721: (QA follow-up) Rename fields to opac*
This patch updates the field names to reflect that they're OPAC
related.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 32721: (QA follow-up) Fix rebase errors
We let some superflous template params creep back in during a rebase
somewhere.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patches addresses issues raised by the QA tests. It also adds a missed import of the Branches file in the document head
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 32721: (QA follow-up) Add missing imports
Missing imports added in three template files
Exec flag added to atomic update file
Tinymce imports removed
A new bug will be created to move codemirror into an inc file at latest
version
Test plan as before
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 32721: Tidy up - duplicate fetching of userjs and css
Currently UserJS and UserCSS is injected into the template as a parameter through Auth.pm but is then fetched using Koha.Preference() in the template. This patch tidies this up by removing the parameters from Auth.pm
Test plan as per first commit
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows for branch specific userJS and userCSS to be added through the libraries table. This works in conjunction with the global UserJS and UserCSS functionality and allows for multiple OPACs with different css and js options.
Test plan:
1) Add to apache conf (/etc/apache2/sites-available/kohadev.conf)
SetEnv OPAC_BRANCH_DEFAULT "FFL"
RequestHeader add X-Koha-SetEnv "OPAC_BRANCH_DEFAULT FFL"
2) In the container, run restart_all
3) Navigate to the OPACUserJS and OPACUserCSS system preferences and add the following: OPACUserJS - console.log('Hello from global sysprefs');, OPACUserCSS - 'body { background-color: black; }'
4) Refresh the OPAC and the background should be black and the message should be logged to the console in developer tools
5) Navigate to Administration > Libraries
6) On the Fairfield branch (if this does not exist you will need to create a branch with a code matching the code that you added to the apache conf file), click edit
7) At the bottom there should be two fields to add userjs and usercss, complete with Codemirror syntax checking
8) In userjs add console.log('Hello from branch level'); and in usercss add 'body { background-color: blue; } then save
9) Return to the OPAC and refresh
10) If you are logged out of the OPAC it should now be logging both the message from global and from the branch level and the background should be blue (if not you will need to log out)
11) Log back into the OPAC using a user that DOES NOT have a default branch matching the branch you added to the Apache conf
12) The OPAC should now revert to only showing the global message in the console with a black background
Sponsored-by: PTFS Europe
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The options defined for the OpacShowSavings system preference contain
HTML: "on patron's checkout history page (the system preference
<em>opacreadinghistory</em> must be enabled)". This text ends up in an
<option> tag, and even though the form is rendered using the
multiple-select plugin the HTML still won't render and should
be removed.
To test, apply the patch and restart all.
- Go to Administration -> System preferences and search for
"OpacShowSavings"
- Check the dropdown of options on the preference. The system
preference names referred to should now be single-quoted instead of
wrapped in visible <em> tags.
- Confirm that the preference still works correctly.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several templates in order to clarify labels in forms
and on table columns.
To test apply the patch and go to Administration -> Authority types ->
MARC structure.
- The second column should now be labeled "Tag description."
- Click "Edit" on one of the tags.
- The description fields should now be labeled "Description in staff
interface" and "Description in OPAC."
- Return to the list of tags and choose Actions -> Subfields for one of
the tags. The second column should read "Description."
- Click "Edit" on one of the subfields.
- The description fields should now be labeled "Description in staff
interface" and "Description in OPAC."
Go to Administration -> MARC bibliographic framework -> MARC structure.
- The second column should now be labeled "Tag description."
- Click "Edit" on one of the tags.
- The description fields should now be labeled "Description in staff
interface" and "Description in OPAC."
- Return to the list of tags and choose Actions -> Subfields for one of
the tags. The second column should read "Description."
- Click "Edit" on one of the subfields.
- The description fields should now be labeled "Description in staff
interface" and "Description in OPAC."
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Sponsored-by: Waikato Institute of Technology, New Zealand
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new `StaffSerialsHome` block to the HTML
Customisations options. This allows for the addition of a block of
content in a page-section at the bottom of the point of sale page.
NOTE: This patch also removes the now defunct database update introduced
in the first patch of the series.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new `StaffPOSHome` block to the HTML
Customisations options. This allows for the addition of a block of
content in a page-section at the bottom of the point of sale page.
NOTE: All the blocks have been placed at the bottom of the home pages
respectively for consistency. However, in this case it doesn't look as
clean as the content above is a form.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new `StaffPatronsHome` block to the HTML
Customisations options. This allows for the addition of a block of
content in a page-section at the bottom of the patrons home page.
NOTE: This one may highlight an issue with Panels directly followed
by page-sections.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new `StaffListsHome` block to the HTML
Customisations options. This allows for the addition of a block of
content in a page-section at the bottom of the lists home
page.
NOTE: This one may highlight an issue with Panels directly followed by
page-sections.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new `StaffCataloguingHome` block to the HTML
Customisations options. This allows for the addition of a block of
content in a page-section at the bottom of the cataloguing home
page.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
