This patch does:
[1] Resolve error [koha-create: line 294: local: `=upload21': not a valid
identifier] by replacing $instance by instance.
[2] Resolved typo for 'specify'.
[3] Resolve error: [sed: -e expression #26, char 20: unknown option to `s']
by replacing the slash in the sed line by a #. This makes sed not
stumble over the slashes in the upload path.
[4] Added the aspect of permanent storage in the wording (as opposed to
the storage of temporary uploads in /tmp or similar).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified that koha-create now inserts the right path in koha-conf.xml.
Verified that koha-create-dirs created the new uploads directory.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes koha-create and koha-create-dirs aware of the new upload_path
configuration entry.
It defaults to /var/lib/koha/<instance>/uploads as proposed by Robin but lets the
user specify its own directory, using the --upload-path option switch that is
added by this patch.
koha-create-dirs is tweaked so it also creates this new directory.
The docs are updated accordingly.
To test:
- Apply the patch, have a packages setup (either by grabbing the relevant files [1]
or by creating your own package).
- Run koha-create --create-db instance
=> SUCCESS: /var/lib/koha/instance/uploads directory is created
=> SUCCESS: /etc/koha/sites/instance/koha-config.xml has upload_path set correctly
- Create a new instance using the --upload-path making it point to whatever you want
=> SUCCESS: koha-conf.xml points to your chosen path
- Sign off :-D
Regards
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Does not work in its current state. Needs a follow-up.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds new column 'oblique_title' to tested
data structure, and update number of tests
To test:
1) Run prove t/db_dependent/Labels/*, or specifically
prove t/db_dependent/Labels/t_Layout.t
It fails
2) apply the patch
3) Run test again, this time must pass
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sometimes t/db_dependent/TestBuilder.t fails with 'TestBuilder can
create a entry for every sources' but we don't know which ones have
failed.
Test plan:
Create the following file: Koha/Schema/Result/Test.pm
package Koha::Schema::Result::Test;
use base 'DBIx::Class::Core';
__PACKAGE__->table("test");
1;
If you don't have a table named 'test' in your DB,
prove t/db_dependent/TestBuilder.t
should return a failure, but without any explanation.
With this patch you should get a diag and know what's wrong.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Right now, Koha only charges fines at the end of a given charge period.
For example, let us assume a circulation rule has a charge period of one
week ( 7 days ) and a fine of $5. This means that an item can be overdue
for 6 days without accruing a fine. Koha should allow circulation rules
to be configured to place the charge at the start of the end of the
charge period so the library can decide when the fine should accrue.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) prove t/db_dependent/Circulation_Issuingrule.t
4) prove t/db_dependent/Circulation.t
5) prove t/db_dependent/Fines.t
6) Ensure you can still create/edit circulation rules
Edit: I removed the DBIx changes after a couple minutes fighting with them.
Will regenerate as usual in a RM followup / Tomas
Signed-off-by: Daniel Grobani <dgrobani@samuelmerritt.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The language menu in koha-tmpl/opac-tmpl/bootstrap/en/includes/masthead.inc is used at other places as well (see Bug 14776).
This patch moves it to a file masthead-langmenu.inc to make it re-usable.
Additionally it streamlines the logic (not all combinations of Opac sysprefs that should display the menu did so).
To test:
- Apply patch
- Verify, that the language menu displays / does not display with combinations of:
- opaclanguagedisplay (Allow)
- opaclanguages ( > 1 language selected)
- OpacLangSelectorMode (top or both)
- Verify that sysprefs opacuserlogin and EnableOpacSearchHistory do not interfere
with the lenguage menu (before, at least one of them had to be on to display the menu)
- Verify that language switching works as before.
Signed-off-by: Chris Kirby <christopherlawrencekirby@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
AdvancedSearchTypes syspref can be multivalued, opac-topissues.pl
have to support that.
AdvancedSearchTypes can have one or more of the following values:
'itemtypes', 'ccode', 'loc'. But this patch adds support only for
itemtypes and ccode. AdvancedSearchTypes can still contain 'loc' but it
will change nothing to the behaviour of opac-topissues.pl.
This patch also removes duplicate code in template (the "Refine your
search" form was written in two different places)
This introduces a small behaviour change: when there is no results,
instead of having the form in the center of the page, it remains in the
left sidebar and we have a "No results" message in the main area.
Depends on bug 14788
Tested on top of 14788. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Tested with syspref 'AdvancedSearchTypes' set to itemtypes an ccode (one at a time).
No problems found.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In order to see the checkboxes of the Collection and Shelving location of the advanced search, the if changed so that only the Itemtypes will go through the previous if
- "Item" and not "Document" is the word used throughout Koha.
- Moved the updates to an atomic update
- changed searchcategory from varchar(20) to (80)
- cleanup
This allows to group certain item types in a category, to be displayed (and searched) as such in OPAC's advanced search. For example, you can group Reserve 2h and Reserve 12h into a Reserve category. The 2 and 12h types won't appear anymore.
This also allows to simply prevent an item type from displaying as a search option.
TEST PLAN
------------------
0) Back up database, so you can reset and retest easily. ;)
1) Apply the patch
2) Run Koha QA tool.
3) prove -v t/db_dependent/Koha.t
-- all tests should pass.
4) run ./installer/data/mysql/updatedatabase.pl to add the
two columns to itemtypes
-- Does a meaningful message get printed?
Are the columns added?
"DESCRIBE itemtypes;" should list hideinopac and searchcategory.
5) You need to add a category to group your item types:
a) In Intranet/Koha Admin/Authorized values,
select DOCTYPECAT in the 'Show category:' dropdown
i) If you do not have a DOCTYPECAT category, create one.
b) Click button "New authorized value for DOCTYPECAT"
c) Enter
Authorized value: HARDWARE
Description : Hardware
Description (OPAC): Hardware
6) Group your items under that new category
a) In Intranet/Koha Admin/Item types, choose (at least)
two item types and for each:
- Click action/Edit on the right column
- Third row (below Description) is the Search category list box, select Hardware
- click Save changes at the bottom
7) Select at least one item to be hidden in the OPAC search
a) In Intranet/Koha Admin/Item types (again), choose a different item type:
- Click action/Edit
- Click the checkbox "Hide in OPAC" below the list of icons.
8) Go test your modifications
a) Go to OPAC/Adv search.
b) Validate that all items modified above (hidden or grouped) do not appear in Item type list
c) Validate that new item type Hardware does appear instead.
d) Select item Hardware, start Search.
) Validate returned items are the of the two types that were grouped into the Hardware category in step 4.
Sponsored-by: Vanier college
Signed-off-by: Nick <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
- Set autoBarcode = <branchcode>yymm0001
- Make sure you have a serial that is set to "create an item record
when receiving this serial"
- Receive an issue
- Click in the barcode field - nothing happens
- Apply patch and reload page
- Receive an issue
- Click in the barcode field - a barcode conforming to the
hbyymmincr setting appears
Patch works as advertised.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a checkbox on Label creator
to use or not an oblique variant of main font
for title
Also fix font selection for title in case an
oblique variant is used.
To test:
Before patch
1) Go to Tools > Label creator
2) Create a new layout, default values but select
any 'Oblique' variant for main font and
'Biblio/Barcode' for layout type
3) Go to Manage batches, create a batch, add items,
export PDF, download
4) Check logs, you must find a line with
'ERROR in koha-conf.xml -- missing <font type="COO">'
for example if main font Courier-Oblique
5) Open PDF, title could be right but not using selected font
After patch
6) Apply the patch
7) Run updatedatabase.pl
8) Repeat 1-2, note new checkbox 'Oblique title',
default checked
9) Repeat export, no new warnings on log
10) Create a new layout or edit an existent one,
uncheck 'Oblique title', save, export again
Check PDF has non slanted title
Followed test plan, works as expected. (See comment #11).
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When run with KEEP_PDF enviroment variable it will keep
test.pdf for manual inspection. This can be used to verify
that ttf font configuration is complete like:
KEEP_PDF=1 KOHA_CONF=/etc/koha/sites/srvgit/koha-conf.xml prove t/Creators.t
sample of utf-8 text, font name and type will be on bottom of second page
Followed test plan, works as expected. (See comment#11)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
As noted in the bug report, there is a typo.
This corrects that typo in documentation.
TEST PLAN
---------
1) perldoc C4::Items
2) Find GetItemsForInventory
-- note that status is spelt incorrectly.
3) Apply patch
4) repeat steps 1-2
-- note that status is spelt correctly now.
5) git diff origin/master
-- note only that line changed.
6) run koha qa tools
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
This typo patch could hit the highway to master at high speeds.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: add a comma at the end of the line
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch ensures that the global maxreserves preference is enforced
when staff members place hold requests.
For example:
Create 3 items to place holds on. Set the circulation rule to allow 50
holds for all items. Set maxreserves to 2. Place a hold on 3 different
items. On the third item, it will give a warning, but you can still
place the hold. Despite what the circulation rule is set for (which is
only a specific case rule), maxreserves is a global rule and
should stop this from happening, not just give a warning.
Test Plan:
1) Reproduce the bug by following the steps above
2) Verify the bug exists
3) Apply this patch
4) Verify the librarian cannot place the hold now
5) Enable AllowHoldPolicyOverride
6) Verify the librarian can forcefully place the hold
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12197: (follow-up) rename variable for greater clarity
"maxreserves" was referring both to the system preference and to the
condition of having exceeded the number of hold requests allowed.
This patch renames a variable to remove the ambguity.
Test plan:
* Same as the main patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch gives the various reasons precedence in this order:
1) Already in possesion
2) Already on hold
3) Age restricted
4) No items available
5) Too many holds
Test Plan:
1) Attempt to place a hold where both "too many holds" and "no items available" messages display
2) Apply this patch
3) Refresh
4) Note only the "no items available" message displays
Signed-off-by: Heather Braum <hbraum@nekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Not sure this is the best way to fix it but it looks to work.
Test plan:
sudo koha-shell kohadev
should not return any error
Without this patch, you should get
bash: cannot set terminal process group (-1): Inappropriate ioctl for device
bash: no job control in this shell
Confirm that other options work as before
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Works as expected. Tested on kohadevbox:ansible.
KOHA_CONF and PERL5LIB are correctly set on the child shell.
Bonus point: koha-shell doesn't die if the user issues Ctrl+C to abort an execution.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The delete op is now "delete" and the confirmation is a JS dialog box.
Note that now this patch removes the categories the tests will add (to
avoid error on inserting duplicate).
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1) Go to circulation screen for patron which has some not-payed charges (or make same if needed)
2) You should see infromation about fees and charges with ability to pay it. Note there is new link for paying all charges at once
3) Try the new link, you should be redirected to members/paycollect.pl, check if there is right amount and try to pay charges
4) try the old link to make sure it works still well after this patch
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In DOM config file :
etc/zebradb/marc_defs/unimarc/biblios/biblio-koha-indexdefs.xml, the 608$9 is
defined a second time instead of 610$9. Just a type I think.
Test plan :
- Apply patch
- Install a UNIMARC + DOM instance
- Define in a framework 610 using a thesaurus
- Create a new biblio
- Create a new authority (same type as the thesaurus defined above)
- Index : rebuild_zebra.pl -a -b -x -z
- Link the field 610 to the new authority
- Index : rebuild_zebra.pl -a -b -x -z
- In authorities search, search for the new authority
=> You see Use in 1 Records(s)
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I confirm the typo.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The patrons search used by the checkout tab and the autocomplete is not
the same as the "search patrons" tab.
The main difference is the "contain" vs "start with".
So that if you have a patron with a patron with a surname "foo bar" and
you search for "foo bar", the autocomplete and the result of a search by
the checkout tab will search for "foo%" or "bar%" which won't return the
patron you are search for.
This patch replaces both autocomplete and checkout tab searches with a
"contain" search. The search will be "%foo%" or "%bar%".
Note that on big DB, this can cause unexpected results.
Test plan:
Create a patron with a surname "foo bar"
Search for "bar" using the checkout tab.
You should see the patron in the autocomplete result and the result page
after submitting the search form.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
ModReceiveOrder now excepts a date formatted following the dateformat
pref.
If nothing is given, default is now.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It does so by slightly changing the naming schema, in line with bug 14667
changes.
It also corrects a minor bug in the breadcrumbs for printer profiles.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Reasoning
Librarians will be doing patron card things in the following frequencies, from most frequent to least frequent:
1. Creating new patron card batches - every day/every few days
2. Managing existing card batches - every day/every few days
3. Managing existing card layouts - as needed, infrequent
5. Managing existing card templates - as needed, infrequent
6. Creating new card layouts - as needed, infrequent
7. Creating new card templates - as needed, infrequent
8. Managing existing printer profiles - possibly once only!
9. Creating new printer profiles - possibly once only!
This change to the patron card creator aims to make the most frequently used items easily accessible at the top of the main area,
reduces clutter on the page, and makes the label creator fall in line with UI paradigms found elsewhere in Koha.
I think I've also improved the translatability here somewhat, please check that.
To test:
Open the patron card creator: More -> Tools -> Patron card creator
Note that the toolbar has changed. It should be consistent across all of the patron card creator (it is an include).
+ New menu:
patron card batch
1. make sure it looks ok - toolbar buttons are consistent at the top of the main block.
2. add patrons both by borrowernumber, and by search
3. note that the usual buttons have moved below the textarea, and now have icons.
4. delete and export single patrons using the buttons corresponding to each patron
5. select multiple and use the buttons above the table to remove and export selected patrons
6. export a full batch
7. deduplicate a batch
There should be no regressions in functionality.
Image
1. This menu item should take you directly to the upload/delete images interface
2. Upload an image, note success message is now below the form, eliminating the jumping box.
3. Delete single images using the buttons
4. Delete multiple images using the tickboxes and "Delete selected"
5. Not deletion success message is below the table, eliminating the jumping box.
Layout
1. This menu item should take you directly to the "Edit layout" screen.
2. no functional changes here.
3. note toolbar at top is consistent
Card template
1. this menu item should take you directly to the "Edit patron card template" page.
2. no functional changes here.
3. note toolbar at top is consistent.
Printer profile
1. this menu item should take you directly to the "Edit printer profile" page.
2. no functional changes here.
3. note toolbar at top is consistent.
+ Manage menu:
Card batches
1. This menu item should take you directly to the "currently available batches" page.
2. select a batch to edit using the buttons - it should take you to the editing interface
3. select a batch to delete using the buttons - it should ask for confirm.
4. select several batches using the tickboxes, and select Export selected. Batches should be exported as normal.
5. note toolbar at top is consistent.
Images (this is actually the same page as on the new menu, I included it in both because it does both functions - can change if requested)
1. This menu item should take you directly to the upload/delete images interface
2. Upload an image, note success message is now below the form, eliminating the jumping box.
3. Delete single images using the buttons
4. Delete multiple images using the tickboxes and "Delete selected"
5. Not deletion success message is below the table, eliminating the jumping box.
Layouts
1. This menu item should take you directly to the "currently available layouts" page.
2. select a layout to edit using the buttons
3. select a layout to delete using the buttons
4. note toolbar at top is consistent.
Card templates
1. This menu item should take you directly to the "currently available templates" page.
2. select a template to edit using the buttons
3. select a template to delete using the buttons
4. note toolbar at top is consistent.
Printer profiles
1. This menu item should take you directly to the "currently available profiles" page.
2. select a profile to edit using the buttons
3. select a profile to delete using the buttons
4. note toolbar at top is consistent
+ General
* note that sidebar now only has "labels home" instead of the full "manage" list. It seemed redundant with the toolbar tidied up.
Please note that I am happy to take suggestions/amendments to these changes.
Followed test plan, behaves as advertised.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Prior to this patch, the tests did not pass if they were launched after
23:00.
DateTime complains if you ask for creating a date with hour => 24 (which
is logical so far).
Test plan:
0/ Don't apply this patch
1/ sudo date -s "2015-10-19 23:50:00";prove
t/db_dependent/Members/IssueSlip.t
2/ Apply this patch and repeat 1.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The introduced syspref was defined before we added new guidelines
for them. This patch puts them in sync with current standards. It also
splits them into:
- A big on/off switch (BatchCheckouts)
- Patron category filter (BatchCheckoutsValidCategories)
The latter is expected to go away if we move this into a boolean column
on the 'categories' table, which seems a better approach. I'm filling a
new bug for this last comment.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is a squash of the following patches:
Bug 11759: (follow-up) Prevent access to the batch checkout if not allowed
If a user pass '&batch=1' to the url, he was allowed to access to the
batch checkout page even if the patron is not in an authorised
category.
This patch also fixes the link to "Batch check out" from the "Details"
tab (cf changes in circ-menu.inc).
Bug 11759: FIX Javascript error
The following JS error occurred:
ReferenceError: MSG_ADD_MESSAGE is not defined
The circulation.js file is useless and should not be included.
Bug 11759: FIX the alert message if an item is on hold.
If an item is on hold, the hold is not cancelled.
This patch corrects the message displayed in this case.
Bug 11759: FIX issue list is empty
The issue list is empty after checking an item out to a patron without
existing checkout.
To reproduce:
- Search for a patron without checkout.
- Check an item out using the "normal" checkout.
- Verify the checkout list contain the checkout.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Add the new pref batch_checkouts in DB.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
