This enhancement gives the ability to set a policy for the lost item
processing fee that may get charged additional to the lost item
replacement cost. The processing fee can be:
- refunded
- refunded if unpaid
- kept
To test:
Set-up
1. Find an item, Item A. Go to Administration -> Item types and edit the
item type for Item A. Add a default replacement cost and a processing
fee and Save.
2. Go to Administration -> system preferences and set the following:
- WhenLostChargeReplacementFee: Charge
- BlockReturnOfLostItems: Don't block
3. Scroll down to the default lost item fee refund on return policy. Set
the refund lost item replacement fee policy to 'refund lost item charge'.
4. Edit Item A and set a replacement cost.
Reproduce
5. Check out Item A to Patron A.
6. Click the barcode to view Item A's information. Edit Item A and set
the Lost status to 'lost'.
7. Go back to Patron A's checkouts. The item should now be checked in
with two new charges applied - a lost item fee (the item's replacement
cost) and a lost item processing fee (set in item types).
8. Check in Item A to mark it as found.
9. Go back to Patron A's account. Notice the lost item fee has been
refunded, but the processing fee remains.
10. Manually pay or write off the processing fee. This enhancement
removes the need for this manual step.
11. Apply the patch and restart services
Test with lost item - refund
12. Go to Administration -> circulation and fines rules. Scroll down to
the default lost item fee refund on return policy. Notice there is now a
refund lost item processing fee policy. Set this to 'refund lost item
processing charge'.
13. Repeat steps 6 to 9.
14. Go back to Patron A's account. Both the lost item fee and processing
fee should have been refunded.
15. Repeat steps 6 to 8 (do not check it yet).
16. Go back to Patron A's account. Pay the processing fee.
17. Repeat step 9.
18. Go back to Patron A's account. Both the lost item fee and processing
fee should have been refunded (you'll now be in a credit because the
paid processing fee was also refunded).
Test with lost item - refund_unpaid
19. Go to Administration -> circulation and fines rules. Scroll down to
the default lost item fee refund on return policy. Notice there is now a
refund lost item processing fee policy. Set this to 'refund lost item
processing charge (only if unpaid)'.
20. Repeat steps 6 to 9.
21. Go back to Patron A's account. Both the lost item fee and processing
fee should have been refunded.
22. Repeat steps 16 to 19.
23. Go back to Patron A's account. The lost item fee should have been
refunded but not the processing fee, as this was already paid.
Test with lost item - leave
24. Go to Administration -> circulation and fines rules. Scroll down to
the default lost item fee refund on return policy. Notice there is now a
refund lost item processing fee policy. Set this to 'leave lost item
processing charge'.
25. Repeat steps 6 to 9.
26. Go back to Patron A's account. The lost item fee and processing fee
should have been refunded but not the processing fee.
Other tests
27. Confirm tests pass
- t/db_dependent/Koha/Item.t
- t/db_dependent/Koha/CirculationRules.t
Sponsored-by: Auckland University of Technology
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
1) Apply this patch
2) Run updatedatabase.pl
3) Verify CircControlReturnsBranch is set to home library by default
4) Set a Return policy for Branch A to "Item returns home" ( homebranch )
5) Set a Return polity for Branch B to "Item returns to issuing library" ( holdingbranch )
6) Set a Return polity for Branch C to "Item floats" ( noreturn )
7) Create an item with homebranch of Branch A, holding branch of branch B
8) Log in as Branch C
9) Set CircControlReturnsBranch to "the library the item is currently held by"
10) Check the item in, note it should be returned to the holding library
11) Set CircControlReturnsBranch to "the library the item is owned by"
12) Check the item in, note it should be returned to the home library
13) Set CircControlReturnsBranch to "the library you are logged in at"
14) Check the item in, note it should float
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Holds to pull should not show items from other branches that shares a
record when IndependentBranches is active. Except for superlibrarians.
Test plan:
1- Have IndependentBranches set to Yes
2- Have a record with an item from the current branch and another item from a different branch. We will call them branch A and branch B respectively
3- Have a patron from branch A place a hold on that record
4- Have a staff account on branch A and B with the following permissions:
- circulate (all)
- catalogue
5- Go to circulation > holds to pull
6- Notice under "Libraries" it displays branch A and B. Also, it shows 2 under "Items available"
7- Checkout the item from branch A to another patron
8- Go back to circulation > holds to pull
9- Notice under "Libraries" it displays branch B even though we are in branch A
10- Apply the patch
11- Return the checked out item from step 7
12- Redo step 5 to 9 with superlibrarian privileges and notice nothing changed
13- Redo step 11-12 but using accounts from step 4 and notice Holds to
pull only shows information relevant to their branch
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Replaced the hardcoded 20 by the value of numReturnedItemsToShow to
display the right number of items in check in.
Test plan:
1- Make lots of checkouts, at least like 40 (I used the batchCheckouts feature)
2- Go to Circulation > Check in
3- Return 21 items
The last 20 items returned will be displayed
4- Change numReturnedItemsToShow to 50
5- Return a couple more items
Only the last 20 returned items are displayed
6- Change numReturnedItemsToShow to 10
7- Return a couple more items
Only the last 10 returned items are displayed
8- Apply the patch
9- Change numReturnedItemsToShow back to 20
10- Do steps 1 to 7 again, but this time step 5 returns the right amount
of items
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
With UseCashRegisters syspref disabled going to the page
/cgi-bin/koha/circ/set-library.pl in staff interface and setting a
library gives the following errors in plack-intranet-error.log:
Use of uninitialized value $register_id in string ne at /kohadevbox/koha/circ/set-library.pl line 79.
Use of uninitialized value $referer in pattern match (m//) at /kohadevbox/koha/circ/set-library.pl line 114.
In the if clause $userenv_register_id appears to be typoed, it should have
been $register_id as $userenv_register_id is always defined. As for the
$referer variable, it is undef if there is no referer so let's just initialize
it to an empty string for the regex so it doesn't give the warning.
To test:
1) Go directly to /cgi-bin/koha/circ/set-library.pl by typing it in
the URL bar and set a library
2) Make sure plack-intranet-error.log doesn't contain the above mentioned errors
after applying this patch
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Just drop the import of GetTransfers from circ/transferstoreceive.pl is
it's never actually used.
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the new classes under ::Patron::Restriction:: and
enhances the Unit tests for those classes.
NOTE: We should drop keyed_on_code as part of bug 31095
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The structure of debarments has changes slightly in that the displayed
text is now a product of a call to Koha::RestrictionTypes rather than
just the debarment's code. This patch allows for that
Sponsored-by: Loughborough University
Signed-off-by: Benjamin Veasey <B.T.Veasey@lboro.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes the code dealing with waiting holds with cancellation
requests be dependent on the fact an item has been found.
The returns.pl controller is a bit messy as the real return takes place
outside the main `if ($item)` block. This should be refactored and
probably run inside a transaction...
In the meantime this patch will make the job.
To test:
1. Try to return an invalid barcode (e.g. ASDQWE)
=> FAIL: Things explode
2. Apply this patch
3. Repeat 1
=> SUCCESS: Doesn't explode!
4. Verify that returning an item with a waiting hold with cancellation
requests still cancells the hold.
=> SUCCESS: It does!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The idea rely on the KohaDates TT plugin for the date formatting. We
should not have any output_pref calls in pl or pm (there are some
exceptions, for ILSDI for instance).
Also flatpickr will deal with the places where dates are inputed. We
will pass the raw SQL value (what we call 'iso' in Koha::DateUtils), and
the controller will receive the same value, no need to additional
conversion.
Note that DBIC has the capability to auto-deflate DateTime objects,
which makes things way easier. We can either pass the value we receive
from the controller, or pass a DT object to our methods.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The time part is displayed on the checkout list
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch displays the column "Return claims" from the page "moremember.pl" to the page "overdues.pl". Rebase on master.
Test plan:
1) Use a patron with at least 1 item who should be checked out soon
2) Home > Patron > Patron details for [name]
3) Click on the 'Checkout' button down the page to show the full table and notice the "Return Claims" column
4) Now go to Home > Circulation > Overdues
5) Find the patron who has to check out and have a look at the table
6) Apply patch and repeat 4) and 5) -> the "Return Claim" column is now displayed on the table
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Prior to this patch librarians had to know the cardnumber to search for
patron. Now it's possible to search using the default patron
autocomplete search (name, cardnumber, etc.)
Test plan:
Confirm that you can search for a patron without their cardnumber,
select it and create a curbside pickup
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes checkin process the cancellation requested holds
actually cancel them before moving forward.
To test:
1. Have a waiting hold with a patron generated cancellation request
2. At circulation, check the item in
=> SUCCESS: The workflow follows as if the cancellation requested hold
was already cancelled
=> SUCCESS: The hold is actually cancelled
=> SUCCESS: Not shown in the OPAC anymore
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch introduces a new tab to the 'Holds awaiting pickup' screen
for holds that have cancellation requests. This can be accepted (by
cancelling the hold) or rejected.
To test:
1. Set circulation rules for cancellation requests, allowing them for
certain item type.
2. Have some waiting holds for a patron on an item type that allows
requesting cancellation.
3. Visit 'Holds awaiting pickup'
=> SUCCESS: No holds have cancellation requests
4. In the OPAC, on the user details, notice some holds have the ability
to be requested cancellation.
5. Choose to request cancellation
=> SUCCESS: Request is placed, the button is disabled
6. In 'Holds awaiting pickup' you can see them
7. Play with rejecting/accepting
=> SUCCESS: It works!
8. Things are reflected in the OPAC side
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We actually want one permission to manage the administration page, and
one for the circulation module.
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We could improve this more and add disable the holiday from the date
picker widget, but it's out of the scope here.
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
A bit of cleaning
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is the main commit message.
A plugin already exists to manage curbside pickups. This new
enhancehemnt is suggesting an implementation that is ready to be integrated
into Koha core in order to provide the feature out-of-the-box.
What has been done in this patch set:
- Deal with installations using the existing plugin (upgrade the DB schema and migrate their data)
- Add a new syspref (CurbsidePickup) and two new permissions:
* parameters.manage_curbside_pickups
* circulate.manage_curbside_pickups
- Add an administration page to setup the configuration: admin/curbside_pickup.pl
- Add a circulation page to manage the existing pickups, and create new one
- Add a new OPAC view "your curbside pickups" to let patron manage their pickups, and create new ones
- Add link from the "member" toolbar
Improvements compared to the plugin:
- Ability to create several pickup windows per day
- Better display of the pickup times (not in a dropdown list)
- Ability to disable pickups for patrons without waiting holds
- Display pickups on the patron circulation page
- Display pickups of the library on the homepage
- Prevent pickup to be created on a holiday
- Better error handling (exceptions)
- Unit tests
More improvements are already planned, see related bug reports.
Test plan:
After you setup the feature correctly from the administration view, you
will be able to use the schedule curbside pickups from the staff
interface, and from the OPAC interface if you selected "patron-scheduled
pickup"
A. Staff interface
1. Go to Circulation > Curbside pickups
=> If the logged-in user has the circulate.manage_curbside_pickups
permission you will be able to create and manage curbside pickups
2. Go to a patron detail page and click the "Schedule pickup" button in
the toolbar
3. If the patron has waiting holds and you selected "Enable for waiting holds only",
of if you didn't select the option, you will be able to select a pickup
date and slots to create a pickup.
4. Confirm that you cannot create more pickups per slot than what you
defined in the curbside pickup configuration for this library
5. Confirm that you cannot create a pickup if the feature is disabled
for the library
6. Notice that you can mark the pickup as "stage and ready", then
"patron is outside" and finally "delivered today". You can also rollback
the change
7. Notice that once the pickup has been marked as delivered, the
item has been checked out and that a new notice has been generated (if
the patron has "Hold_Filled" in their messaging preferences
8. Confirm that the information about current pickups is displayed on
the circulation page of the patron
B. OPAC interface
1. Create a new curbside pickup from the OPAC
2. Confirm that the same limitations as from the staff interface are in
effect (waiting holds, number of patron per slots, etc.)
3. Confirm that you can cancel a pickup and alert staff of you arrival
4. Confirm that you cannot cancel a pickup that has been delivered
already
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The code in here is weird.. we really aught to check for the item before
anything else and throw an error to screen if we don't find one... but
my patch takes the simple option, and the one taken elsewhere in the
script.. to just check for item being defined before calling a method
upon it.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This enhancement shows recalls ready for pick-up on the patron's account
so they can't be missed.
To test:
1) Enable the UseRecalls system preference and set up your
recalls-related circulation rules.
2) Check out an item to Patron B.
3) Log into the OPAC as Patron A and search for the item.
4) Place a recall on that item. Note the pickup library.
5) Go back to the staff client. At the top right of the page, confirm
your logged in library matches the recall pickup library. Set the
library to the recall pickup library if needed.
6) Check in the recalled item and confirm the recall as waiting for
Patron A.
7) Go to Patron A's account (members/moremember.pl). Confirm the recall
shows under 'Recalls waiting here' and all the information is correct.
8) Go to Patron A's checkouts (circ/circulation.pl). Confirm the recall
shows under 'Recalls waiting here' and all the information is correct.
9) Click on the menu at the top right of the page and choose 'Set
library'. Change the library to some other library.
10) Repeat steps 7 and 8, however this time the recall should show under
'Recalls waiting at other libraries'.
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When different patrons have item level holds on the same item, Holds to
pull shows wrong first patron.
Test plan:
1) Place a record-level hold on a biblio with an available item
2) Check the Holds to pull page (circ/pendingreserves.pl)
--> The biblio should appear in the list and the patron should appear in the 'First patron' column
3) Place a second record-level hold on the same biblio
4) Go back to the Holds to pull page
--> The biblio is still there, but the patron in the 'First patron' column is the second patron
5) Place a third record-level hold on the same biblio
6) Go back to the Holds to pull page
--> The biblio is still there, but the patron in the 'First patron' column is the third patron
7) Apply the patch
8) Go back to the Holds to pull page
--> The biblio is still there and the patron in the 'First patron' column is the first patron
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
TO test:
1 - Find a bib with a single item
2 - Browse to Circulation->Transfer
3 - Transfer the item to another branch
4 - Check the item in at current branch and cancel the transfer on the dialog
5 - Place a hold on the biblio for a patron at current branch
6 - Browse to Circulation->Holds to pull
7 - Item does not show
8 - Apply patch, restart all
9 - Browse to Circulation->Holds to pull
10 - Item shows
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the circ/ysearch.pl script used by the jQuery autocomplete widget.
We can now use the /api/v1/patrons endpoint to retrieve the patrons and
generate the patron result list.
Prior to this patch the different occurrences were defining the style
and the list of patron's attributes to display for each option (name,
date of birth, age, address, etc.). Now they are all displaying the same
information.
To acchieve this we had to:
* Make js-date-format.inc and js-patron-get-age.inc available from js_includes.inc
and so available from everywhere, which is certainly a good move. We
could discuss why this code is in include file instead of JS files
however.
* Remove the .ajaxSetup call in tags-review.js to reduce its scope: an
underscore parameter was added to the REST API query (?)
A better solution would have been to extend the existing widget
(https://learn.jquery.com/jquery-ui/widget-factory/extending-widgets/)
but I didn't manage to do it, and I feel like there is a bug in jQuery
autocomplete. The "source" was not taken into account.
We could think about replacing the jQuery autocomplete with something
else, but that's outside the scope of this bug.
Test plan:
Search for patrons and confirm the autocomplete works and that the
"select" action works as before (either a redirect or select the
patrons) on the different views:
* Place a hold
* Search for tags (form on the left)
* In the header, "Check out" and "Search patrons"
* Add instructors to course reserves
* View logs (the "librarian" input)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a further modal to the post checkin alert to allow the
user to print a view and print a list of items that went missing at this
checkin to allow for replacements to be picked.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch records the bundle issue from which an item is marked as lost
so that we may use that to infer who lost the item (for later charges
and display).
Test plan
0) Apply all patches up to this point
1) Checkout a bundle to a user
2) Checkin the bundle and do not scan one of the barcodes at
confirmation
* Note that the item not scanned is marked as lost
3) Navigate to the biblio for the lost item and note that it is marked
as lost.
4) Navigate to the biblio for the collection and expand the collection
item that contains the lost item. Note the item is marked as lost and
checkout details are listed.
5) Checkin the lost item
* The item should be marked as found and the return_claims line should
be marked as resolved.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the circulation system to account for bundle
checkins. We add a content verification step to ensure bundle content is
all present at checkin and we use this comparison to mark missing items
as lost.
Test plan
0) Apply patches up to this point
1) Checkin an item that belongs to a bundle
* An alert should be triggered noting that the item belongs to a
bundle
* The option to remove the item from the bundle should be clear
* Click remove should result in the alert dissapearing and the item
having been removed from the bundle.
2) Checkin an item bundle
* A modal confirmation dialog should appear requesting each item
barcode be scanned
* As items are scanned they should be highlighted in yellow in the
bundle content table
* Upon submission;
* The user will be alerted to any unexpected items that were
scanned and told to put them to one side.
* The user will be alerted that any missing items in the validation
will have been marked as lost.
* The bundle item will be marked as checked in.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To Test:
1. Apply patch, updatedatabase, and restart_all
2. A small change the global scss file means you should regenerate the CSS as well. ( https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_interface )
3. Set DisplayClearScreenButton to "don't show"
4. Go to the patron checkout screen and see that no button should show to clear the screen and print
5. Set DisplayClearScreenButton to 'ISSUESLIP' and make sure the button now appears and the ISSUESLIP prints
6. Set DisplayClearScreenButton to 'ISSUEQSLIP' and make sure the button now appears and the ISSUEQSLIP prints
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the new 'Middle name' field to the patron record.
To test:
1) Apply patches
2) Update database, restart all and clear the browser cache
3) Load a patron in the staff module
4) Confirm you can see and edit the new 'Middle name' field
5) Confirm the new middle name data displays on patron details
6) Confirm the new middle name data displays on patron search results
7) Confirm the new middle name data displays everywhere patron names are
displayed.
8) Confirm the new middle name data displays on the OPAC
9) Confirm the 'Middle name' field appears in the OPAC borrower
modification screens
10) Edit sysprefs `BorrowerMandatoryFields`, `BorrowerUnwantedFields`,
`SelfModificationBorrowerUnwantedField`, `PatronSelfModificationMandatoryField`,
`PatronSelfRegistrationBorrowerMandatoryField` and
`PatronSelfRegistrationBorrowerUnwantedField` to confirm you can make
the new field required or hidden.
11) Verify that DefaultPatronSearchFields contains the new field if you
already had 'firstname' in the field list
12) Enable PatronAutoComplete system preference
13) Type patrons surname into checkout or patron search but don't hit
return
14) Confirm the patrons middle name is displayed in the preview
15) Go to tools > patron lists and attempt to add a patron to a list
16) Patrons middle name should appear in the autocomplete here too
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
1) This removes support for passing string dates to CanBookBeIssued. The
function didn't publicly even document support for string dates, only
DateTime objects.
2) We get a $duedate always at least from CalcDateDue so having
$issuingimpossible{INVALID_DATE} = output_pref($duedate);
was unneccesary and thus removed.
3) The check "duedate cannot be before now" was needlessly complex: if
the due date really cannot be before now we should check seconds too
and warn the librarian! Thus the truncation to minutes can be dropped
safely.
To test:
1) prove t/db_dependent/Circulation.t
2) prove t/db_dependent/Illrequests.t
3) Enable OnSiteCheckouts and disable SpecifyDueDate syspref. Create
on-site checkout for any patron and verify the due date is your
current date at 23:59, you can check the exact minute with sql:
> select * from issues
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Barcode is trimmed of leading/trailing whitespaces in many instances
before the barcodedecode sub was called. This patch instead makes that
barcodedecode sub is going to trim it itself and removes unnecessary,
and repetitive code that was used before barcodedecode was called.
Steps to test:
1. Edit item with any barcode, add a bunch of whitespaces at the start
and at the bottom of it. Save the item. Ensure that this action ruins
the barcode and ensure that the spaces are still there by editing the
same item again.
2. Apply the patch.
3. Edit the same item again in the same fashion. Ensure that now all
whitespaces are getting trimmed and it doesn't affect the barcode in
any negative way.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates all the calls to pass a hasref rather than an array
It also removes the no longer used framework parameter
To test:
prove -v t/Biblio.t t/db_dependent/Biblio/TransformMarcToKoha.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Holds to Pull ( pendingreserves.pl ) ignores holds if priority 1 hold is suspended,
and shows the wrong number of "patrons with holds" which presumably tells the
librarian how many copies to pull from the shelves.
Test Plan:
1) Create a record with one or more holdable items
2) Place two holds on the record
3) Note they show in the holds to pull report
4) Suspend the priority 2 hold
5) Note the report continues showing that 2 patrons have holds
6) Resume the priority 2 hold
7) Suspend the priority 1 hold
8) Note the hold disappears from the holds to pull report
9) Apply this patch
10) Restart all the things!
11) Reload the holds to pull report
12) The report should show one hold that needs an item pulled to fill it!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In Circulation > Overdues, if there are seachable patron attributes
they can be used in left filters. Search does not work if this attribute
is linked to an authorized values category.
The problem is that AV code is compared to the AV desciption in :
if (grep { $attrval eq lc($_->[1]) } @{ $pattrs->{$code} }) {
Looking at a Data::Dumper of the var $pattrs you see for example :
$VAR1 = {
'ATT1' => [
[
'afr',
'Afrikaans'
]
]
};
First row is attribute code and second row is desciption.
It works for an attribute without AV because in this case
'avdescription' is undefined so code is stored as description :
push @{ $pattrs->{$row->{attrcode}} }, [
$row->{attrval},
defined $row->{avdescription} ? $row->{avdescription} : $row->{attrval},
];
This patch fixes the code and removes commented line.
Also reviews the SQL query :
- avcategory is useless
- use alias attrcode for borrower_attributes.code to be more explicit
Test plan :
1) Create a patron A with overdues
2) Go to Circulation > Overdues
3) Check you see the patron A
4) Create a patron attribute, searchable, with an authorized value
category, ie LANG
5) Edit patron A to set a value in this attribute
6) Go to Circulation > Overdues
7) Select attribute value and apply filter
8) Check you see the patron A
9) Redo test plan with a patron attribute, searchable, without an
authorized value category
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the three scripts that fetched the soonest renewal date
to use the return from CanBookBeRenewed
To test:
1 - Set a circulation rule with a 'no renewal before' set to 3, loan length set to 5
2 - Check out an item to a patron that uses this rule
3 - Verify the checkouts for the patron show the correct 'No renewal before' date
4 - Sign in to the patron's opac account
5 - Verify the item shows it cannot be renewed, and shows the correct date
6 - Go to Circulation->Renew
7 - Attempt to renew using barcode
8 - Confirm error shows the soonest renewal date
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
RevertWaitingStatus has already removed the itemnumber from the hold, passing $itemnumber (from scanned item) should work, as it will reattach the hold to the item
Test plan:
1 - Enable HoldsAutoFill
2 - Place a title level hold
3 - Check in an item and confirm hold
4 - Switch to another branch
5 - Checkin the item
Without this patch you got
Can't call method "biblionumber" on an undefined value at /kohadevbox/koha/C4/Reserves.pm line 1577.
at /kohadevbox/koha/C4/Reserves.pm line 1576
With this patch applied the operation succeeds
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
There are 2 prefs that control the default view of biblio detail pages:
IntranetBiblioDefaultView for staff and BiblioDefaultView for OPAC.
There are as well viewISBD, viewLabeledMARC and viewMARC to allow/don't
allow access to those page for staff members.
This code need to be in a single place to avoid discrepancy.
Test plan:
Play with BiblioDefaultView and IntranetBiblioDefaultView and confirm
that the links of biblio point to the correct view.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Reuse what has been done before to implement the patron search using the
REST API route, when requesting an article
Test plan:
Request an article for a patron and confirm that the search is working
correctly.
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Having IndependentBranches on, a librarian who is not superlibrarian
does not get a autocomplete hint list when entering a part of the
patron's name (while performing check out, etc.) Koha registers
an error:
DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st
execute failed: Column 'branchcode' in where clause is ambiguous at
.../Koha/Objects.pm line 312
This is due to fix to the bug 10902 -- addig "prefetch => 'branchcode'" to
the attributes of the query in circ/ysearch.pl, while having branchcode
in the search parameters.
Test plan:
----------
1. Have IndependentBranches on, PatronAutoComplete set to 'Try.
Be a librarian without superlibrarian privileges. Have some
patrons defined.
2. In the main input field on the top, with Check out active, try to
put 3+ characters from the known user name/cardnumber etc. You
will get no hint.
3. Apply the patch.
4. Repeat 2. You should now see an autocomplete hint list.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
There are several occurrences of `my $var += ` or .= in the code.
It should not cause problems but it's confusing.
Test plan:
Read the patch and confirm that the changes make sense.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
In circ/overdue.pl, the Title column is the result of includes/biblio-title.inc display. The code of biblio-title.inc means to display subtitle, part_number and part_name from biblio table, but nothing but commas show up because those fields are never retrieved by overdue.pl
To reproduce:
1) have an item whose biblio.subtitle, part_name and part_number and non-empty.
2) issue it, then set it late (overdue).
3) go to the report page (circ/overdue.pl) and make it appear.
4) subtitle, part_number and part_name do not appear, although they are meant to by biblio-title.inc code
5) apply the patch and try again.
It's a simple fix of adding the fields in the database query.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This makes two changes:
1 - We no longer call get_items_that_can_fill if there are no holds
2 - The subroutine will return an empty Koha::Items object if there are no holds passed
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
